First Report of Leaf Spot of Houttuynia cordata Caused by Alternaria alternata in China

Houttuynia cordata is a perennial herbaceous plant (family Saururaceae) that is native to southern China, Japan, Korea, and Southeast Asia where it grows well in moist to wet soils. It is commonly used as a Chinese herbal medicine and as a vegetable. In North America and Europe it is also used as an ornamental. From September 2007 to November 2009, symptoms of leaf spot were found on H. cordata leaves in Dangyang County, Hubei, China, with the crop area affected estimated to be over 600 ha per year. Rhizome yield was reduced by 20% on average, with up to 70% yield losses in some fields during the autumn growing season. Lesions were initially small, brown, and oval or circular that developed into dark spots and sometimes formed target spots with white centers. These spots enlarged and overlapped, extending until the leaves withered entirely usually within 2 months. A fungus was consistently recovered from symptomatic leaf samples collected in October 2008 or 2009 with an average 90% isolation rate from ~60 leaf pieces that were surface sterilized with 0.1% mercuric chloride solution. Three isolates, HCDY-2, HCDY-3, and HCDY-4, were used to further evaluate characteristics of the pathogen. On potato dextrose agar, all cultures initially developed white colonies and the centers turned gray or brown after 4 days of incubation. Conidiophores were single or fasciculate, straight or knee curved, gray-brown with regular septa, and 42 to 61 × 4 to 5 μm. Conidia were obclavate or ovate, brown, and 26 to 38 × 12 to 20 μm with three to five transverse and one to three longitudinal or oblique septa. The tops of some conidia developed into secondary conidiophores, which were cylindrical, beige, and 5 to 17 × 3 to 5 μm. The pathogen was identified as Alternaria alternata based on descriptions in Simmons (3). Genomic DNA of HCDY-2 was extracted, and the rDNA-internal transcribed spacer sequence showed 99.6% identity to A. alternata (GenBank No. AY513941). Pathogenicity tests were performed with the three isolates by spraying conidial suspensions (1 × 10⁶ conidia/ml) containing 0.1% Tween 20 onto upper and lower surfaces of leaves of 40-day-old 15-cm high plants. There were 20 leaves from five replicate plants for each isolate. Control plants were treated with sterilized water containing 0.1% Tween 20 only. All plants were incubated with a 16-h photoperiod at 25°C and 90% relative humidity in an artificial climate chamber. Five days after inoculation, typical brown spots were observed on all inoculated leaves but no symptoms were seen on water-treated control plants. Koch's postulates were fulfilled by reisolation of A. alternata from diseased leaves. The pathogenicity tests were carried out twice. A survey of the literature revealed only a few fungal diseases associated with H. cordata (1,2,4), including Phyllosticta houttuyniae, Pseudocercospora houttuyniae, Rhizoctonia solani, and Sclerotium rolfsii. Although A. alternata is a cosmopolitan plant pathogen, it has not been reported on any species in the four genera in Saururaceae (Anemopsis, Gymnotheca, Houttuynia, and Saururus) (3). To our knowledge, this is the first report of A. alternata infecting H. cordata worldwide. References: (1) Y. L. Guo and W. X. Zhao. Acta Mycol. Sin. 8:118, 1989. (2) K. Sawada. Spec. Publ. Taiwan Univ. 8:138, 1959. (3) E. G. Simmons. Alternaria: An Identification Manual. The American Phytopathological Society, St. Paul, MN, 2007. (4) Y. Wu et al. J. Changjiang Vegetables (In Chinese) 2:19, 2007.

Development of a multi-parametric model predictive control algorithm for insulin delivery in type 1 diabetes mellitus using clinical parameters

A multi-parametric model predictive control (mpMPC) algorithm for subcutaneous insulin delivery for individuals with type 1 diabetes mellitus (T1DM) that is computationally efficient, robust to variations in insulin sensitivity, and involves minimal burden for the user is proposed. System identification was achieved through impulse response tests feasible for ambulatory conditions on the UVa/Padova simulator adult subjects with T1DM. An alternative means of system identification using readily available clinical parameters was also investigated. A safety constraint was included explicitly in the algorithm formulation using clinical parameters typical of those available to an attending physician. Closed-loop simulations were carried out with daily consumption of 200 g carbohydrate. Controller robustness was assessed by subject/model mismatch scenarios addressing daily, simultaneous variation in insulin sensitivity and meal size with the addition of Gaussian white noise with a standard deviation of 10%. A second-order-plus-time-delay transfer function model fit the validation data with a mean (coefficient of variation) root-mean-square-error (RMSE) of 26 mg/dL (19%) for a 3 h prediction horizon. The resulting control law maintained a low risk Low Blood Glucose Index without any information about carbohydrate consumption for 90% of the subjects. Low-order linear models with clinically meaningful parameters thus provided sufficient information for a model predictive control algorithm to control glycemia. The use of clinical knowledge as a safety constraint can reduce hypoglycemic events, and this same knowledge can further improve glycemic control when used explicitly as the controller model. The resulting mpMPC algorithm was sufficiently compact to be implemented on a simple electronic device.

Arterial stiffness and asymptomatic intracranial large arterial stenosis and calcification in hypertensive chinese

BACKGROUND

Intracranial large artery disease (ICLAD), such as stenosis and calcification, is common in Chinese patients with stroke. However, little is known about ICLAD and its association with large arterial stiffness in hypertensive patients.

METHODS

We recruited 270 (mean age 61.0 years, 45.6% male) untreated hypertensive patients without stroke from a community in Shanghai, China. ICLAD was detected by computerized tomographic angiography (CTA). Carotid-femoral pulse wave velocity (cf-PWV), office, and 24-h ambulatory pulse pressure (PP) as well as ambulatory arterial stiffness index (AASI) were determined as the measures of arterial stiffness.

RESULTS

Among all participants, 26 (9.6%) had concurrent intracranial arterial stenosis and calcification, 11 (4.1%) stenosis only, and 71 (26.3%) calcifications only. After adjustment for age, mean arterial pressure, and other covariables, there was significant difference in cf-PWV (13.1 vs. 13.7 vs. 15.0 m/s; P = 0.0015) and 24-h PP (46.7 vs. 48.8 vs. 55.7 mm Hg; P = 0.0007) between patients with normal vessels (n = 162), with stenosis or calcification (n = 82), and with both lesions (n = 26). Multiple ordinal logistic regression analyses showed that both cf-PWV and 24-h PP were independently associated with ICLAD. Odds ratios (95% confidence interval (CI)) of ICLAD after multivariable and mutually adjustment were 1.51 (1.09-2.10) and 1.46 (1.06-2.01) for 1-s.d. increase in cf-PWV and 24-h PP, respectively. No significant association (P ≥ 0.10) with AASI or office PP was observed in multivariable analysis.

CONCLUSION

Increased arterial stiffness was independently associated with ICLAD. cf-PWV and 24-h PP might be useful in identifying those more likely to have ICLAD among hypertensive patients.

Optimizing the weight loss-on-ignition methodology to quantify organic and carbonate carbon of sediments from diverse sources

The sequential weight loss-on-ignition (WLOI) method for determination of organic and carbonate or inorganic carbon (C) content was evaluated on sediments from diverse sources with a great range of C contents. The sediments were collected from canal, wetland, river, estuary, lake, and marine sites. The organic and inorganic C contents of these samples ranged from 1 to 430 g kg( -1) and from 4 to 97 g kg( -1), respectively. Combinations of the combustion time and temperature and optimal weight ranges of representative samples were tested, and comparisons of the WLOI method with other methods, including dry combustion and wet combustion, were made. These methods were (1) use of the carbon-nitrogen-sulfur (CNS) autoanalyzer with normal and reduced temperatures for total and organic C, (2) thermogravimetry for both organic and inorganic C, (3) use of the CNS autoanalyzer after removal of inorganic (carbonate) C by fumigating samples with concentrated HCl for organic C, (4) Walkley-Black wet combustion method for organic C, and (5) pressure-calcimeter associated with subtraction method (total C minus inorganic C) for organic C determinations. The results of analyzing samples of sediments of diverse origins showed that the optimal combination of temperature and time of WLOI depended mostly on the sources of the analyzed sediment. The WLOI analysis of sediment samples for organic C from wetlands, canal, estuary, or river sites needed a relatively low temperature but that of sediment samples from lake and marine sites required a relatively high temperature. Overall, to obtain reliable analysis results of samples from widely varied sediment sources except marine sediments, 500°C for 12 h was optimal for organic C content determination, and 800°C for yet another 12 h was optimal for inorganic C content determination. The temperature could even be reduced to 475°C if only wetland and stream sediments were included, but for marine sediments, 550°C for 12 h was necessary. Precise C content determinations for most sediment sources could be obtained by WLOI when sample quantities ranged from 2.0 to 4.0 g. The WLOI method, when conducted properly, resulted in precise measurements of C contents in "standard samples" used for calibration, and these values were closely comparable to results obtained with other dry combustion methods (R (2) ≥ 0.96). We conclude that WLOI, which has advantages of simplicity, cost-effectiveness, and no waste disposal over other methods, can provide precise measurements of organic and inorganic C contents in sediments from a wide range of sources, but the selection of heating temperature and exposure time should be carefully considered based on sediment sources.

Molecular analysis of an additional case of hybrid sterility in rice (Oryza sativa L.)

Hybrid sterility hinders the exploitation of the heterosis displayed by japonica × indica rice hybrids. The variation in pollen semi-sterility observed among hybrids between the japonica recipient cultivar and each of two sets of chromosome segment substitution lines involving introgression from an indica cultivar was due to a factor on chromosome 5 known to harbor the gene S24. S24 was fine mapped to a 42 kb segment by analyzing a large F(2) population bred from the cross S24-NIL × Asominori, while the semi-sterility shown by the F(1) hybrid was ascribable to mitotic failure at the early bicellular pollen stage. Interestingly, two other pollen sterility genes (f5-Du and Sb) map to the same region (Li et al. in Chin Sci Bull 51:675-680, 2006; Wang et al. in Theor Appl Genet 112:382-387, 2006), allowing a search for candidate genes in the 6.4 kb overlap between the three genes. By sequencing the overlapped fragment in wild rice, indica cultivars and japonica cultivars, a protein ankyrin-3 encoded by the ORF2 was identified as the molecular base for S24. A cultivar Dular was found to have a hybrid-sterility-neutral allele, S24-n, in which an insertion of 30 bp was confirmed. Thus, it was possible to add one more case of molecular bases for the hybrid sterility. No gamete abortion is caused on heterozygous maternal genotype with an impaired sequence from the hybrid-sterility-neutral genotype. This result will be useful in understanding of wide compatibility in rice breeding.

Fiber in-line Mach-Zehnder interferometer constructed by selective infiltration of two air holes in photonic crystal fiber

A fiber in-line Mach-Zehnder interferometer is fabricated through selective infiltrating of two adjacent air holes of the innermost layer in the solid core photonic crystal fiber, assisted by femtosecond laser micromachining. The liquid infiltrated has higher refractive index than that of the background silica, and, hence, the two rods created can support a guide mode with lower effective refractive index than that of silica. The interference is produced by the fiber fundamental mode and the guide mode. The free spectral range (FSR) of the interferometer is found to be dependent on the photonic crystal fiber length, and a large FSR corresponds to a short photonic crystal fiber length. Such an interferometer device is robust and exhibits extremely high temperature sensitivity (∼7.3 nm/°C for the photonic crystal fiber length of 3.4 cm) and flexible operation capability.

Improved performance of organic light-emitting diodes with MoO3 interlayer by oblique angle deposition

We fabricated and demonstrated improved organic light emitting diodes (OLEDs) in a thin film architecture of indium tin oxide (ITO)/ molybdenum trioxide (MoO3) (20 nm)/N,N'-Di(naphth-2-yl)-N,N'-diphenyl-benzidine (NPB) (50 nm)/ tris-(8-hydroxyquinoline) (Alq3) (70 nm)/Mg:Ag (200 nm) using an oblique angle deposition technique by which MoO3 was deposited at oblique angles (θ) with respect to the surface normal. It was found that, without sacrificing the power efficiency of the device, the device current efficiency and external quantum efficiency were significantly enhanced at an oblique deposition angle of θ=60° for MoO3.

Differential cytokine responses in human and mouse lymphatic endothelial cells to cytokines in vitro

BACKGROUND

Inflammatory cytokines dysregulate microvascular function, yet how cytokines affect lymphatic endothelial cells (LEC) are unclear.

METHODS AND RESULTS

We examined effects of TNF-α, IL-1 beta, and IFN-gamma on LEC proliferation, endothelial cell adhesion molecule (ECAM) expression, capillary formation, and barrier changes in murine (SV-LEC) and human LECs (HMEC-1a).

RESULTS

All cytokines induced ICAM-1, VCAM-1, MAdCAM-1, and E-selectin in SV-LECs; TNF-α, IL-1 beta; and IFN-gamma induced ECAMs (but not MAdCAM-1) in HMEC-1a. IL-1 beta increased, while IFN-gamma and TNF-α reduced SV-LEC proliferation. While TNF-α induced, IFN-gamma decreased, and IL-1 beta did not show any effect on HMEC-1a proliferation. TNF-α, IL-1 beta, and IFN-gamma each reduced capillary formation in SV-LEC and in HMEC-1a. TNF-α and IL-1 beta reduced barrier in SV-LEC and HMEC-1a; IFN-gamma did not affect SV-LEC barrier, but enhanced HMEC-1a barrier. Inflammatory cytokines alter LEC growth, activation and barrier function in vitro and may disturb lymphatic clearance increasing tissue edema in vivo.

CONCLUSION

Therapies that maintain or restore lymphatic function (including cytokines blockade), may represent important strategies for limiting inflammation.

Semiconductor-Doped Polymers. Linear and Nonlinear Optical Properties

Semiconductor clusters with sizes of a few to hundreds of Å, covering the entire range from molecular to bulk, have been prepared within polymer films. For PbS, the band-gap shifts to higher energy as the cluster size decreases and eventually converges to the transition energy of the first excited state of PbS molecule. The observed dependence of band-gap on cluster size can be explained by a tightbinding model that takes into account the effects of band nonparabolicity. These semiconductor-doped polymers represent a new class of nonlinear optical materials. Here we present the nonlinear optical properties of polymer films doped with 50 A CdS and discuss the possible mechanisms.

Wetting Behaviors of Sn-Based Solders on Cu and Pd Surfaces

We have studied the surface morphology and wetting reaction of eutectic SnBi, eutectic SnPb, and pure Sn on Cu and Pd surfaces. In the case of Pd, the reactions were so fast that no quasi-equilibrium wetting angle could be measured. The compound formation has changed not only the interfaces but also the surfaces. Due to the formation of a reaction band outside the solder cap, the SnPb solder is no longer wetting the Cu surface but rather the Cu-Sn compound surface. In the wetting interface between eutectic SnPb and Cu, the morphology of the scallop-like Cu-Sn compound grains shows that we may not apply the classical model of layered compound growth to analyze the rate of soldering reactions.

Confirmation of the X(1835) and observation of the resonances X(2120) and X(2370) in J/ψ→γπ+π-η'

With a sample of (225.2±2.8)×10(6) J/ψ events registered in the BESIII detector, J/ψ→γπ(+)π(-)η(') is studied using two η(') decay modes: η(')→π(+)π(-)η and η(')→γρ(0). The X(1835), which was previously observed by BESII, is confirmed with a statistical significance that is larger than 20σ. In addition, in the π(+)π(-)η(') invariant-mass spectrum, the X(2120) and the X(2370), are observed with statistical significances larger than 7.2σ and 6.4σ, respectively. For the X(1835), the angular distribution of the radiative photon is consistent with expectations for a pseudoscalar.

Local delivery of recombinant human bone morphogenetic protein-2 increases axonal regeneration and the expression of tau protein after facial nerve injury

This study explored the function and possible mechanism of bone morphogenetic protein-2 (BMP-2) in the healing of injured peripheral nerves in vivo. Rabbit facial nerves were injured by clamping and then treated with recombinant human BMP-2 (rhBMP-2) or phosphate-buffered saline (control) by injecting once during surgery and twice a day post-injury for 7 days. Facial nerve fragments within 5 mm of the clamping point were examined at different times post-surgery. Axon structures visualized by Bielschowsky staining were similar in experimental and control nerves 2 and 6 weeks post-injury. At 4 weeks post-injury, cross-section images of facial nerves showed that axons treated with rhBMP-2 were denser and thicker, and levels of tau protein were increased. It is concluded from these data that rhBMP-2 may affect injured facial nerve regeneration by inducing more neurons to return to embryonic patterns of tau gene expression.

Measurement of the parity-violating longitudinal single-spin asymmetry for W± boson production in polarized proton-proton collisions at sqrt[s] = 500 GeV

We report the first measurement of the parity-violating single-spin asymmetries for midrapidity decay positrons and electrons from W+ and W- boson production in longitudinally polarized proton-proton collisions at sqrt[s] = 500 GeV by the STAR experiment at RHIC. The measured asymmetries, A(L)(W+) = -0.27 ± 0.10(stat.) ± 0.02(syst.) ± 0.03(norm.) and A(L)(W-) = 0.14 ± 0.19(stat.) ± 0.02(syst.) ± 0.01(norm.), are consistent with theory predictions, which are large and of opposite sign. These predictions are based on polarized quark and antiquark distribution functions constrained by polarized deep-inelastic scattering measurements.

Application Of Thin Films Of Conjugated Polymers In Novel Led's And Liquid Crystal “Light Valves”

Light emitting electroluminescent devices have been studied in which the conjugated light emitting polymer is separated on both sides from the device electrodes by a film of nonconducting polyaniline. The devices operate under an AC applied potential.Aluminum, copper or gold serve as the metal electrodes. Flexible, completely organic polymer dispersed liquid crystal light valves have been fabricated from transparent plastic substrates on which a conducting film of polypyrrole has been deposited. A new concept, “microcontact printing”, is being investigated for patterning the polypyrrole.

A Multi-Anvil High Pressure System with Synchrotron X-Ray Probe: New Opportunities for In-Situ Materials Research at Simultaneously High Pressure and Temperature

We describe the multi-anvil, large-volume, high-pressure facility that is being constructed at the GeoSoilEnviroCARS (Sector 13) at the Advanced Photon Source, Argonne National Laboratory. Various multi-anvil, high-pressure apparatus will be used to cover pressure and temperature conditions up to 40 GPa and 3000 °C, respectively, with milimeter to centimeter sized samples. This national facility is open to all users, providing excellent opportunities for high pressure, high temperature experiments.