Distal tibial fractures are a poorly recognised complication with fibula free flaps

The fibula free flap is ideal for complex jaw reconstructions, with low reported donor and flap morbidity. We discuss a distal tibial stress fracture two months following a vascularised fibula free flap procedure. Despite being an unrecognised complication, a literature review produced 13 previous cases; only two were reported in the reconstructive surgery literature, with the most recent claiming to be the first. The majority of these studies treated this fracture non-operatively; none reported their patient follow-up. Each case presented with ipsilateral leg pain, which has been cited as an early donor site morbidity in as many as 40% of fibula free flap cases. It is known that the fibula absorbs at least 15% of leg load on weight bearing. Studies have shown severe valgus deformities in up to 25% of patients with fibulectomies. We treated our patient operatively, first correcting his worsening valgus deformity with an external fixator, then reinforcing his healed fracture with a long distal tibial plate. We believe that this complication is underreported, unexpected and not mentioned during the consenting process. By highlighting the management of our case and the literature, we aim to increase awareness (and thus further reporting and appropriate management) of this debilitating complication.

Fertility and Pregnancy in Thalassaemia and Sickle Cell Disease. The UK Guidelines

Progressive improvements in the health and survival of patients with thalassaemia and sickle cell disease have increased the reproductive prospects of affected individuals. However, pregnancy in these disorders is associated with significant maternal and fetal risks and expert management is required to ensure good outcomes. In the United Kingdom, it is recognised that the patchy geographical distribution of these conditions poses challenges for access to specialist care, including specialist obstetric services. Guidelines on the pregnancy management of thalassaemia and sickle cell disease in the UK have been published by the Royal College of Obstetricians and Gynaecologists. These guidelines describe the preconceptual, antenatal, intrapartum and postpartum aspects of care. They highlight the high-risk status of pregnancy in these conditions and emphasise the vital importance of specialist multidisciplinary care to the achievement of favourable maternal and fetal outcomes. The guidelines are a valuable resource to healthcare professionals, especially those working in low prevalence areas.

Identification of toxicants in cinnamon-flavored electronic cigarette refill fluids

In a prior study on electronic cigarette (EC) refill fluids, Cinnamon Ceylon was the most cytotoxic of 36 products tested. The purpose of the current study was to determine if high cytotoxicity is a general feature of cinnamon-flavored EC refill fluids and to identify the toxicant(s) in Cinnamon Ceylon. Eight cinnamon-flavored refill fluids, which were screened using the MTT assay, varied in their cytotoxicity with most being cytotoxic. Human embryonic stem cells were generally more sensitive than human adult pulmonary fibroblasts. Most products were highly volatile and produced vapors that impaired survival of cells in adjacent wells. Cinnamaldehyde (CAD), 2-methoxycinnamaldehyde (2MOCA), dipropylene glycol, and vanillin were identified in the cinnamon-flavored refill fluids using gas chromatography–mass spectrometry and high-pressure liquid chromatography (HPLC). When authentic standards of each chemical were tested using the MTT assay, only CAD and 2MOCA were highly cytotoxic. The amount of each chemical in the refill fluids was quantified using HPLC, and cytotoxicity correlated with the amount of CAD/product. Duplicate bottles of the same product were similar, but varied in their concentrations of 2MOCA. These data show that the cinnamon flavorings in refill fluids are linked to cytotoxicity, which could adversely affect EC users.

Noncontrast myocardial T1 mapping using cardiovascular magnetic resonance for iron overload

PURPOSE

To explore the use and reproducibility of magnetic resonance-derived myocardial T1 mapping in patients with iron overload.

MATERIALS AND METHODS

The research received ethics committee approval and all patients provided written informed consent. This was a prospective study of 88 patients and 67 healthy volunteers. Thirty-five patients underwent repeat scanning for reproducibility. T1 mapping used the shortened modified Look-Locker inversion recovery sequence (ShMOLLI) with a second, confirmatory MOLLI sequence in the reproducibility group. T2 * was performed using a commercially available sequence. The analysis of the T2 * interstudy reproducibility data was performed by two different research groups using two different methods.

RESULTS

Myocardial T1 was lower in patients than healthy volunteers (836 ± 138 msec vs. 968 ± 32 msec, P < 0.0001). Myocardial T1 correlated with T2 * (R = 0.79, P < 0.0001). No patient with low T2 * had normal T1 , but 32% (n = 28) of cases characterized by a normal T2 * had low myocardial T1 . Interstudy reproducibility of either T1 sequence was significantly better than T2 *, with the results suggesting that the use of T1 in clinical trials could decrease potential sample sizes by 7-fold.

CONCLUSION

Myocardial T1 mapping is an alternative method for cardiac iron quantification. T1 mapping shows the potential for improved detection of mild iron loading. The superior reproducibility of T1 has potential implications for clinical trial design and therapeutic monitoring.

Medial submuscular plating of the femur in a series of paediatric patients: a useful alternative to standard lateral techniques

We describe the technique and results of medial submuscular plating of the femur in paediatric patients and discuss its indications and limitations. Specifically, the technique is used as part of a plate-after-lengthening strategy, where the period of external fixation is reduced and the plate introduced by avoiding direct contact with the lateral entry wounds of the external fixator pins. The technique emphasises that vastus medialis is interposed between the plate and the vascular structures. A total of 16 patients (11 male and five female, mean age 9.6 years (5 to 17)), had medial submuscular plating of the femur. All underwent distraction osteogenesis of the femur with a mean lengthening of 4.99 cm (3.2 to 12) prior to plating. All patients achieved consolidation of the regenerate without deformity. The mean follow-up was 10.5 months (7 to 15) after plating for those with plates still in situ, and 16.3 months (1 to 39) for those who subsequently had their plates removed. None developed a deep infection. In two patients a proximal screw fractured without loss of alignment; one patient sustained a traumatic fracture six months after removal of the plate. Placing the plate on the medial side is advantageous when the external fixator is present on the lateral side, and is biomechanically optimal in the presence of a femoral defect. We conclude that medial femoral submuscular plating is a useful technique for specific indications and can be performed safely with a prior understanding of the regional anatomy.

4D digital subtraction angiography: implementation and demonstration of feasibility

BACKGROUND AND PURPOSE

Conventional 3D-DSA volumes are reconstructed from a series of projections containing temporal information. It was our purpose to develop a technique which would generate fully time-resolved 3D-DSA vascular volumes having better spatial and temporal resolution than that which is available with CT or MR angiography.

MATERIALS AND METHODS

After a single contrast injection, projections from the mask and fill rotation are subtracted to create a series of vascular projections. With the use of these projections, a conventional conebeam CT reconstruction is generated (conventional 3D-DSA). This is used to constrain the reconstruction of individual 3D temporal volumes, which incorporate temporal information from the acquired projections (4D-DSA).

RESULTS

Typically, 30 temporal volumes per second are generated with the use of currently available flat detector systems, a factor of ∼200 increase over that achievable with the use of multiple gantry rotations. Dynamic displays of the reconstructed volumes are viewable from any angle. Good results have been obtained by using both intra-arterial and intravenous injections.

CONCLUSIONS

It is feasible to generate time-resolved 3D-DSA vascular volumes with the use of commercially available flat detector angiographic systems and clinically practical injection protocols. The spatial resolution and signal-to-noise ratio of the time frames are largely determined by that of the conventional 3D-DSA constraining image and not by that of the projections used to generate the 3D reconstruction. The spatial resolution and temporal resolution exceed that of CTA and MRA, and the small vessel contrast is increased relative to that of conventional 2D-DSA due to the use of maximum intensity projections.

Patella distal pole avulsion secondary to osteomyelitis in a healthy adult

Primary haematogenous patella osteomyelitis in an adult is a rare condition. Cases published in the literature relate predominantly to the paediatric population or are associated with risk factors such as intravenous drug abuse, human immunodeficiency virus and penetrating trauma. The rarity of this condition and its atypical presentation should be borne in mind while treating a patient with anterior knee pain. It is crucial to evaluate radiography of diagnostic quality carefully.

Design of Dispersive Mixing Devices

Mixing is one of the main functions of screw extruders. In the analysis of mixing, there are two mixing mechanisms that need to be considered: distributive and dispersive mixing. It is well known that single screw extruders generally have poor dispersive mixing capability, even when dispersive mixing elements are incorporated into the screw design. This paper will discuss the requirements for dispersive mixing, current dispersive mixing elements used in single screw extruders will be analyzed, and the lack of efficient dispersive mixing will be explained. A new generation of dispersive mixing elements will be introduced for use in both single and twin screw extruders and internal mixers. A two and three dimensional flow simulation will be used to analyze the mixing performance of these new mixers. Experimental work on the new mixing elements will be presented in a follow-up paper; the results demonstrate that it is possible to achieve dispersive mixing on single screw extruders that is as good as what can be achieved on twin screw extruders. The implications of these results on the compounding industry will be briefly discussed.