Optimization of Sweet Bread Dough Processing Conditions by Twin Screw Extrusion

Effects of material feed rate, water addition amount, screw speed and sets of kneading elements on sweet bread dough handling properties and bread qualities were studied by Response Surface Methodology in twin screw extrusion. Results showed that dough stickiness was significantly affected by water addition amount and screw speed (p < 0.001, R2 = 0.9227). Firmness of bread crumb and spread ratio, which is an index for bread appearance, were both significantly affected by water addition amount, screw speed, and sets of kneading elements (p < 0.001, R2 = 0.8940; p < 0.001, R2 = 0.8884). The optimal conditions for sweet bread dough processing are water addition amount ranging from 45 to 50 %, screw speed ranging from 180 to 280 min−1, with material feed rate and kneading element set fixed at 40 min−1 and ten, respectively.

Experimental Study on the Filling of Nano Structures with Infrared Mold Surface Heating

In the fabrication of plastic components with micro or nano structures, injection molding is one of the simple and most cost-effective processes. In the injection molding process, a complete filling of the micro or nano structures is necessary to fabricate a successful product. However, it is difficult to fully fill nano structures with an aspect ratio close to one or higher by the conventional molding process. In this study, mold inserts with nano channels were constructed by a LIGA-like process. The effects of the processing parameters and infrared heating on the filling of the nano structures were explored experimentally. Increasing the mold temperature, pressure, or filling rate did not improve the filling distance in nano channels with the conventional molding process significantly. Thus, an infrared mold surface heating system was introduced to assist the molding of the nano structures. To enhance the heating efficiency and reduce the cycle time, a heat-resistant layer was inserted under the mold cavity. The heat resistant plate led the heating system to work more efficiently. It easily increased the surface temperature over the glass transition temperature of plastic, thus fully filling the nano structures.

Erosive potential of sports beverages

BACKGROUND

Dental erosion is an increasingly prevalent problem in Australia, with the consumption of sports beverages suggested as a risk factor. The aim of this study was to compare the erosive potential of Australian sports beverages.

METHODS

Ten beverages were selected and analysed to determine their pH, titratable acidity and apparent degree of saturation with respect to apatite. The erosive potential of the beverages was measured by human enamel surface loss and surface softening following a 30-minute exposure. A taste testing panel was established to determine the palatability of the sports beverages.

RESULTS

All sports beverages except Sukkie and Endura produced substantial surface loss and surface softening. Compared with the other sports beverages, Sukkie and Endura had a higher pH, lower titratable acidity and higher calcium content. However, Sukkie and Endura were deemed to be less palatable than the other more acidic sports beverages.

CONCLUSIONS

The majority of the sports beverages tested produced dental erosion in this in vitro model. However, two new products Sukkie and Endura have lower erosive potential but also lower palatability.

Differential effects of arsenic on calcium signaling in primary keratinocytes and malignant (HSC-1) cells

Arsenic is highly toxic to living cells, especially skin, and skin cancer is induced by drinking water containing arsenic. The molecular mechanisms of arsenic-induced cancer, however, are not well understood. To examine the initial processes in the development of arsenic-induced cancer, we analyzed calcium signaling at an early stage of arsenic treatment of human primary cells and compared the effects with those observed with arsenic treatment in carcinoma-derived cells. We found that arsenic inhibited inositol trisphosphate receptor (IP3R) function in the endoplasmic reticulum by inducing phosphorylation, which led to decreased intracellular calcium levels. Blockade of IP3R phosphorylation by the serine/threonine protein kinase Akt inhibitor wortmannin rescued calcium signaling. In contrast, arsenic treatment of cells derived from a carcinoma (human squamous carcinoma; HSC-1) for 1h had no obvious effect. Taken together, these results suggest that arsenic-induced reduction in calcium signaling is one of the initial mechanisms underlying the malignant transformation in the development of skin cancer.

The optimal effect site concentration of remifentanil in combination with intravenous midazolam and topical lidocaine for awake fibreoptic nasotracheal intubation in patients undergoing cervical spine surgery

BACKGROUND

Remifentanil has been suggested as a suitable agent for conscious sedation during fibreoptic intubation. We evaluated the optimal effect site concentration (Ce) of remifentanil target-controlled infusion (TCI) for awake nasotracheal fibreoptic intubation in patients undergoing elective cervical spine surgery.

METHODS

Nineteen ASA I-II patients were enrolled. Patients were premedicated with midazolam (<70 kg 1.5 mg; >70 kg 2.0 mg) intravenously. The EC(50) and EC(95) of remifentanil Ce for smooth intubation were determined using Dixon's up-and-down method and isotonic regression. Smooth intubation was considered to have failed when patients exhibited sustained and repetitive coughing with head lift during the procedure. Intubation time, number of attempts, adverse events, and hemodynamic variables were also recorded. Patients were asked to recall the procedure and grade satisfaction at postoperative 24 h.

RESULTS

The EC(50) of remifentanil Ce for smooth intubation was 2.33±0.38 ng·mL-1 as calculated by Dixon's method. The estimated EC(95) of remifentanil Ce was 3.38 (95% confidence interval 2.90-3.46) ng·mL-1. Median intubation time (min) was longer in failed smooth intubation than in smooth intubation (8.0 vs. 6.1, P=0.048). Eleven patients (58%) recalled the procedure and 16 patients (84%) rated their satisfaction score as good or excellent.

CONCLUSION

The estimated EC(95) of remifentanil Ce for smooth nasotracheal fibreoptic intubation with conscious sedation was 3.38 (95% CI 2.90-3.46) ng·mL-1 when used in combination with midazolam and topical lidocaine. Remifentanil TCI may provide a tolerable experience of awake fibreoptic intubation despite the high incidence of recall.

Effect of sunlight irradiation on photocatalytic pyrene degradation in contaminated soils by micro-nano size TiO2

The enhanced catalytic pyrene degradation in quartz sand and alluvial and red soils by micro-nano size TiO(2) in the presence and absence of sunlight was investigated. The results showed that the synergistic effect of sunlight irradiation and TiO(2) was more efficient on pyrene degradation in quartz sand and red and alluvial soils than the corresponding reaction system without sunlight irradiation. In the presence of sunlight irradiation, the photooxidation (without TiO(2)) of pyrene was very pronounced in alluvial and red soils and especially in quartz sand. However, in the absence of sunlight irradiation, the catalytic pyrene degradation by TiO(2) and the photooxidation (without TiO(2)) of pyrene were almost nil. This implicates that ultra-violet (UV) wavelength range of sunlight plays an important role in TiO(2)-enhanced photocatalytic pyrene degradation and in photooxidation (without TiO(2)) of pyrene. The percentages of photocatalytic pyrene degradation by TiO(2) in quartz sand, alluvial and red soils under sunlight irradiation were 78.3, 23.4, and 31.8%, respectively, at 5h reaction period with a 5% (w/w) dose of the amended catalyst. The sequence of TiO(2)-enhanced catalytic pyrene degradation in quartz sand and alluvial and red soils was quartz sand>red soil>alluvial soil, due to different texture and total organic carbon (TOC) contents of the quartz sand and other two soils. The differential Fourier transform infrared (FT-IR) spectra of degraded pyrene in alluvial soil corroborate that TiO(2)-enhanced photocatalytic degradation rate of degraded pyrene was much greater than photooxidation (without TiO(2)) rate of degraded pyrene. Based on the data obtained, the importance for the application of TiO(2)-enhanced photocatalytic pyrene degradation and associated organic contaminants in contaminated soils was elucidated.

Oxidative degradation of pyrene in contaminated soils by δ-MnO2 with or without sunlight irradiation

The enhanced oxidative degradation of pyrene in quartz sand and alluvial and red soils by micro-nano size birnessite (δ-MnO(2)) in the presence and absence of sunlight was investigated. The degradation of pyrene by δ-MnO(2) in quartz sand showed very little synergistic effect of sunlight irradiation on δ-MnO(2) oxidizing power. However, pyrene degradation by δ-MnO(2) in alluvial and red soils was greater under solar irradiation than the combination of photooxidation of pyrene and oxidation of pyrene by δ-MnO(2). The oxidative degradation percentages of pyrene by δ-MnO(2) under sunlight irradiation are 94.8, 97.7, and 100% for alluvial soil, red soil, and quartz sand, respectively. Oxidative degradation percentages of pyrene by δ-MnO(2) in alluvial and red soils with irradiation of sunlight almost attained a maximum at 1 h with a 5% (w/w) dose of the amended oxidant. Due to their different total organic carbon (TOC) contents, the sequence of enhanced oxidative degradation of pyrene by δ-MnO(2) in quartz sand and alluvial and red soils was quartz sand>red soil>alluvial soil. Further, this study revealed that δ-MnO(2)-enhanced oxidative degradation of pyrene is very pronounced in contaminated soils in situ even at deep soil layers where irradiation by sunlight is very limited.

Comparison of the effect-site concentrations of remifentanil for Streamlined Liner of the Pharynx Airway (SLIPA) versus laryngeal mask airway SoftSealTM insertion during target-controlled infusion of propofol

This study was designed to determine the optimal dose of remifentanil required for the successful insertion of Streamlined Liner of the Pharynx Airway (SLIPA) and to compare it to that required for laryngeal mask airway (LMA) insertion in patients receiving a propofol infusion at a standard effect-site concentration. Fifty-eight patients scheduled to undergo general anaesthesia were randomly assigned to either the SLIPA (n = 29) or LMA (n = 29) group. All patients were premedicated with midazolam 0.05 mg x kg(-1) and glycopyrrolate 0.004 mg x kg(-1) intramuscularly. After the administration of lignocaine 1 mg x kg(-1) intravenously, a propofol infusion was started at an effect-site concentration of 3.5 microg x ml(-1) with a remifentanil infusion without a neuromuscular blocking agent. The remifentanil dose was determined by the modified up-and-down method starting in each group at 4 ng x ml(-1). Six minutes after induction, the airway device was inserted. Airway device insertion was classified as 'success' or 'failure' based on patient response. From the isotonic regression analysis and bootstrap distribution, the EC50 of remifentanil for SLIPA and LMA were 0.93 ng x ml(-1) (95% confidence interval [CI] 0.81 to 1.50 ng x ml(-1) and 1.36 ng x ml(-1) (95% CI 1.19 to 2.06 ng x ml(-1)) respectively, and the EC95 for SLIPA and LMA insertions were 1.90 ng x ml(-1) (95% CI 1.39 to 1.95) and 2.43 ng x ml(-1) (95% CI 1.80 to 2.46 ng x ml(-1)) respectively. Using the 83% CIs from the bootstrap distribution, EC50 for SLIPA was significantly less than that of LMA (0.83 to 1.23 vs 1.26 to 2.00, respectively) (P < 0.05). These findings suggest that the insertion of SLIPA needs about a 32% lower depth of anaesthesia than LMA insertion.

Epitaxial Growth of CuAu–Ordered CuInSe2 Structural Polytypes by Migration Enhanced Epitaxy

Migration-Enhanced Epitaxy (MEE) has been successfully employed to grow epitaxial films of the ternary compound CuInSe2 on (001) GaAs that are ordered in a CuAu crystallographic structure rather than the compound's equilibrium chalcopyrite structure. Evidence for this structural polytype is provided by XRD, TEM–TED, and Raman scattering data. Film growth under the conditions employed for this study occurs in a Stranski-Krastanov mode. The effects of growth system parameters and overall stoichiometry on 3–D island formation are described, including our observation that ordering of those islands into quasiperiodic self-assembled arrays occurs only in the case of nonstoichiometric copper excess.