3D surface orientation based on a novel representation of the orientation disparity field

The orientation disparity field from two orthographic views of an inclined planar surface patch (covered by straight lines) is analyzed, and a new tool to extract the patch orientation is provided: the function coupling the average orientation of each pair of corresponding surface contours with their orientation disparity. This function allows identifying the tilt of the surface, and two indeterminacy functions describing the set of surface inclinations (around the vertical and horizontal axes) over convergence angle values compatible with the orientation disparity field. Results of simulations show that the selection of inclination values matching the difference between the areas below the indeterminacy functions are consistent with some surface orientation effects found in psychophysical and computational experiments, like: the unbiased tilt vs. biased slant estimates, the slant underestimation, the surface orientation anisotropy, and the slant/tilt covariation.

Approximation, torsion, and amodally-completed surfaces

Consider a stereoscopic display simulating two rectangular patches, the lower frontoparallel and the upper slanted around the vertical axis. When the two patches are amodally completed and appear as the unoccluded parts of a smooth surface partially hidden by a foreground frontoparallel surface, either real or illusory, their relative slant is underestimated with respect to a baseline condition in which they are perceived as separate rectangles. Slant assimilation was studied in three experiments using with- vs. without-occluder displays and two methods, slant matching and speeded classification of twist direction. In Experiments 1 and 2 we found slant assimilation in with-occluder displays and slant contrast in without-occluder displays. In Experiment 3 we isolated a component of slant assimilation attributable to the mere presence of the occluder. Twist classification performance was impaired even when edge geometry hindered amodal completion, but the performance loss was larger when surface patches were amodally completed. To minimize the required amount of torsion, input fragments are misperceived, indicating that in limiting conditions amodal completion is mediated by approximation rather than interpolation. Slant assimilation decreases as twist angle increases, up to a limit above which the visual system does not support the formation of a smooth amodal surface with torsion.

Apparent Motion by Edge Discontinuities

When the eyes move vertically across a jagged diamond, a local shift (LS) of edge discontinuities and a global shape distortion (GD) (ie expansion/contraction opposite to that expected by the aperture effect) are perceived. These phenomena cannot be accounted for by a local motion signals integration rule based either on the intersection of constraint lines or on the velocity vector summation. The threshold for GD perception and the salience of LS and GD (1 to 10 scale) were measured in two experiments by different methods and displays. In experiment 1 we induced GD through mimicking LS with a kinetic pattern constituted of a set of circular illusory apertures revealing drifting gratings. The point of subjective equality for compression/expansion was reached for gratings the linear extrapolations of which form an angle of 94.4°. In experiment 2 observers followed a dot moving along the vertical elongation axis of a static jagged diamond (with 70° or 90° angles), varying in the shape (triangular, wave, square), frequency, and amplitude of edge discontinuities. GD scores were correlated with LS scores that were inversely related to frequency/amplitude ratios of triangular edge discontinuities. Data are partially accounted for by averaging neighbouring local motion-capture vectors. Results prove that there are strong interrelations between phenomena in which visual motion affects visual localisation and phenomena involving apparent deformation of global shape.

Volume measurement by CARTO compared with cardiac magnetic resonance

AIMS

The CARTO electrophysiological mapping system has demonstrated accurate results for end-diastolic ventricular volumes in casts and animals. However, in humans, a comparison with cardiac magnetic resonance (CMR), the non-invasive gold standard for volumetric analysis, has not yet been performed.

METHODS AND RESULTS

A total of 34 (29 male) heart failure patients (NYHA class III/IV) underwent an electrophysiological mapping procedure with the CARTO system in the left ventricle (LV) (n = 34) and right ventricle (RV) (n = 12) and CMR for RV and LV end-diastolic volume (RVEDV and LVEDV) measurements another day. Mean LVEDV was comparable between CMR and CARTO (328 +/- 95 and 320 +/- 92 mL, respectively; P = NS), whereas RV volumes measured by CARTO were larger (CMR 140 +/- 48 vs. CARTO 176 +/- 47 mL; P < 0.01). Overall, we found a good correlation between CMR and CARTO measurements for both chambers; however, the Bland-Altman analysis showed a non-interchangeability of these methods. Measurement differences were independent of chamber size, but significantly affected by the number of acquired mapping points.

CONCLUSION

Although CMR and CARTO showed a good correlation in the measurement of RVEDV and LVEDV in a group of heart failure patients, the clinical interchangeability of the two methods may be questioned.

Visual interpolation is not scale invariant

According to the scale-dependence hypothesis, the visual interpolation of contour fragments depends on the retinal separation of endpoints: as the retinal size of a partially occluded angle increases, the interpolated contour gradually deviates from the shortest connecting path and approaches the shape of the unoccluded angle. In the field model, as the retinal size increases the strength of good continuation increases while the strength of the minimal-path tendency decreases. To test the scale-dependence hypothesis--as well as other hypotheses connected to inclusion, support-ratio dependence, and extended relatability--we ran two experiments using the probe localization technique. Stimuli were regular polygons with rectilinear contours bounding symmetrically occluded angles. Retinal size was manipulated by changing viewing distance. Observers were asked to judge if a probe, briefly superposed on the occlusion region, was inside or outside the amodally completed angle. Retinal size strongly influenced the penetration of interpolated trajectories in the predicted direction. However, support ratio and interpolated angle size interacted with retinal size, consistently with the idea that unification factors are effective within a spatial window. We modified the field model to include the size of such a window as a new parameter and generated model-based trajectories that fitted empirical data closely.

Contour curvature polarity and surface interpolation

Contour curvature polarity (i.e., concavity/convexity) is recognized as an important factor in shape perception. However, current interpolation models do not consider it among the factors that modulate the trajectory of amodally-completed contours. Two hypotheses generate opposite predictions about the effect of contour polarity on surface interpolation. Convexity advantage: if convexities are preferred over concavities, contours of convex portions should be more extrapolated than those of concave portions. Minimal area: if the area of amodally-completed surfaces tends to be minimized, contours of convex portions should be less extrapolated than contours of concave portions. We ran three experiments using two methods, simultaneous length comparison and probe localization, and different displays (pictures vs. random dot stereograms). Results indicate that contour polarity affects the amodally-completed angles of regular and irregular surfaces. As predicted by the minimal area hypothesis, image contours are less extrapolated when the amodal portion is convex rather than concave. The field model of interpolation [Fantoni, C., & Gerbino, W. (2003). Contour interpolation by vector-field combination. Journal of Vision, 3, 281-303. Available from http://journalofvision.org/3/4/4/] has been revised to take into account surface-level factors and to explain area minimization as an effect of surface support ratio.

[Check-list for inspection in banks]

We suggest a checklist for inspection in banks. The checklist is composed of 14 schedules where information on bank clerks and buildings is collected. Principle risk factors are analysed (workplaces, lighting and noise, air quality, emergency management). The critical points are observed and the times of intervention are established. Then follows data processing and the reports are transmitted to the employer. The checklist, tested on 250 workplaces, allows us to identify the interventions having priority to be realized through appropriate planning. A quantitative evaluation of the risk is matched with immediate and brief operative indications. The situations to improve are: cleanliness of workplaces, thermal comfort, electricity/telephone wires. The checklist seems to be a valid instrument for the evaluation of risk factors, their management and times of intervention. Such instrument simplifies, moreover, the employer choices of intervention.

Contour interpolation by vector-field combination

We model the visual interpolation of missing contours by extending contour fragments under a smoothness constraint. Interpolated trajectories result from an algorithm that computes the vector sum of two fields corresponding to different unification factors: the good continuation (GC) field and the minimal path (MP) field. As the distance from terminators increases, the GC field decreases and the MP field increases. Viewer-independent and viewer-dependent variables modulate GC-MP contrast (i.e., the relative strength of GC and MP maximum vector magnitudes). Viewer-independent variables include the local geometry as well as more global properties such as contour support ratio and shape regularity. Viewer-dependent variables include the retinal gap between contour endpoints and the retinal orientation of their stems. GC-MP contrast is the only free parameter of our field model. In the case of partially occluded angles, interpolated trajectories become flatter as GC-MP contrast decreases. Once GC-MP contrast is set to a specific value, derived from empirical measures on a given configuration, the model predicts all interpolation trajectories corresponding to different types of occlusion of the same angle. Model predictions fit psychophysical data on the effects of viewer-independent and viewer-dependent variables.

Tobacco smoking, occupational exposure and chronic respiratory disease in an Italian industrial area

Tobacco smoking and occupational exposure are the major factors responsible for chronic obstructive pulmonary disease (COPD) worldwide. The prevalence of this disease and its main risk factors were investigated in an area characterized by a high density of iron- and steelworking factories in North Italy. A total of 1,497 subjects (50% male) aged 40-59 yrs underwent an interview and a physical assessment, and 1,244 of them also underwent spirometry. The prevalences of COPD and asthma were 16.1 and 5.2% among males and 4.4 and 4.0% among females. COPD and respiratory symptoms were associated with both smoking and occupational exposure in males: the odds ratios for having been occupationally exposed among males were 2.3 (95% confidence interval 1.4-3.7) for COPD and 1.7 (1.2-2.6) for respiratory symptoms. No association was found between asthma and tobacco smoking or occupational exposure. The forced expiratory volume in one second and forced vital capacity were associated negatively with smoking and not associated with occupational exposure. In females, lesser effects of cigarette smoking on both self-reported respiratory diseases and lung function tests were found. The attributable risks of chronic obstructive pulmonary disease for smoking and occupational exposure among males were 52.9 and 8.8%, respectively, and 60.3% when considered together, whereas 18.8% of chronic obstructive pulmonary disease cases among females were attributable to smoking.

Prevalence of risk factors for coronary heart disease in a mountain community in northern Italy

We performed a population survey in the Valle Sabbia mountain community, a highly industrialized area in the province of Brescia, in northern Italy, in order to estimate the prevalence of the main risk factors for coronary heart disease (CHD) among middle-aged men and women. A random sample of 1497 subjects (747 males) aged 40-59 were interviewed and underwent a physical examination. A blood sample was also taken to test total serum cholesterol. Personal histories of hypertension and CHD were given by 20.3 and 4.6% of men, and by 23 and 2.4% of women, respectively. A personal history of diabetes mellitus was reported by 5.2% of men and 4% of women. The mean values of systolic and diastolic blood pressure (SBP and DBP), total cholesterol, number of cigarettes smoked per day and BMI were, respectively: 135.1 and 84.1 mmHg, 219.2 mg/dl, 10.2 cig/day and 26.2 in men, and 136.8 and 83.9 mmHg, 214.3 mg/dl, 2.4 cig/day and 25.1 in women. Among men, 45.0% had SBP > or = 140 or DBP > or = 90, 32.3% had total cholesterol > or = 240 mg/dl, 29.3% were current smokers and 60.7% had a BMI higher than 25. Among women, 48.7% had SBP > or = 140 or DBP > or = 90, 26.0% had total cholesterol > or = 240 mg/dl, 16.8% were current smokers and 44.3% had a BMI higher than 25. When considering the prevalence of high SBP or DBP, high total cholesterol or cigarette smoking, 72.3% of men and 67.7% of women had at least one of the main risk factors for CHD, usually higher values of SBP or DBP, whereas 29.3% of men and 21.2% of women had two or more factors. Overall, prevalences of the most common CHD risk factors in this community were similar to those found in other surveys carried out in Italy in the last decade.