Erosive potential of sports beverages

BACKGROUND

Dental erosion is an increasingly prevalent problem in Australia, with the consumption of sports beverages suggested as a risk factor. The aim of this study was to compare the erosive potential of Australian sports beverages.

METHODS

Ten beverages were selected and analysed to determine their pH, titratable acidity and apparent degree of saturation with respect to apatite. The erosive potential of the beverages was measured by human enamel surface loss and surface softening following a 30-minute exposure. A taste testing panel was established to determine the palatability of the sports beverages.

RESULTS

All sports beverages except Sukkie and Endura produced substantial surface loss and surface softening. Compared with the other sports beverages, Sukkie and Endura had a higher pH, lower titratable acidity and higher calcium content. However, Sukkie and Endura were deemed to be less palatable than the other more acidic sports beverages.

CONCLUSIONS

The majority of the sports beverages tested produced dental erosion in this in vitro model. However, two new products Sukkie and Endura have lower erosive potential but also lower palatability.

Differential effects of arsenic on calcium signaling in primary keratinocytes and malignant (HSC-1) cells

Arsenic is highly toxic to living cells, especially skin, and skin cancer is induced by drinking water containing arsenic. The molecular mechanisms of arsenic-induced cancer, however, are not well understood. To examine the initial processes in the development of arsenic-induced cancer, we analyzed calcium signaling at an early stage of arsenic treatment of human primary cells and compared the effects with those observed with arsenic treatment in carcinoma-derived cells. We found that arsenic inhibited inositol trisphosphate receptor (IP3R) function in the endoplasmic reticulum by inducing phosphorylation, which led to decreased intracellular calcium levels. Blockade of IP3R phosphorylation by the serine/threonine protein kinase Akt inhibitor wortmannin rescued calcium signaling. In contrast, arsenic treatment of cells derived from a carcinoma (human squamous carcinoma; HSC-1) for 1h had no obvious effect. Taken together, these results suggest that arsenic-induced reduction in calcium signaling is one of the initial mechanisms underlying the malignant transformation in the development of skin cancer.

What is the best DFT functional for vibronic calculations? A comparison of the calculated vibronic structure of the S1-S0 transition of phenylacetylene with cavity ringdown band intensities

The sensitivity of vibronic calculations to electronic structure methods and basis sets is explored and compared to accurate relative intensities of the vibrational bands of phenylacetylene in the S(1)(A(1)B(2)) ← S(0)(X(1)A(1)) transition. To provide a better measure of vibrational band intensities, the spectrum was recorded by cavity ringdown absorption spectroscopy up to energies of 2000 cm(-1) above the band origin in a slit jet sample. The sample rotational temperature was estimated to be about 30 K, but the vibrational temperature was higher, permitting the assignment of many vibrational hot bands. The vibronic structure of the electronic transition was simulated using a combination of time-dependent density functional theory (TD-DFT) electronic structure codes, Franck-Condon integral calculations, and a second-order vibronic model developed previously [Johnson, P. M.; Xu, H. F.; Sears, T. J. J. Chem. Phys. 2006, 125, 164331]. The density functional theory (DFT) functionals B3LYP, CAM-B3LYP, and LC-BLYP were explored. The long-range-corrected functionals, CAM-B3LYP and LC-BLYP, produced better values for the equilibrium geometry transition moment, but overemphasized the vibronic coupling for some normal modes, while B3LYP provided better-balanced vibronic coupling but a poor equilibrium transition moment. Enlarging the basis set made very little difference. The cavity ringdown measurements show that earlier intensities derived from resonance-enhanced multiphoton ionization (REMPI) spectra have relative intensity errors.

The optimal effect site concentration of remifentanil in combination with intravenous midazolam and topical lidocaine for awake fibreoptic nasotracheal intubation in patients undergoing cervical spine surgery

BACKGROUND

Remifentanil has been suggested as a suitable agent for conscious sedation during fibreoptic intubation. We evaluated the optimal effect site concentration (Ce) of remifentanil target-controlled infusion (TCI) for awake nasotracheal fibreoptic intubation in patients undergoing elective cervical spine surgery.

METHODS

Nineteen ASA I-II patients were enrolled. Patients were premedicated with midazolam (<70 kg 1.5 mg; >70 kg 2.0 mg) intravenously. The EC(50) and EC(95) of remifentanil Ce for smooth intubation were determined using Dixon's up-and-down method and isotonic regression. Smooth intubation was considered to have failed when patients exhibited sustained and repetitive coughing with head lift during the procedure. Intubation time, number of attempts, adverse events, and hemodynamic variables were also recorded. Patients were asked to recall the procedure and grade satisfaction at postoperative 24 h.

RESULTS

The EC(50) of remifentanil Ce for smooth intubation was 2.33±0.38 ng·mL-1 as calculated by Dixon's method. The estimated EC(95) of remifentanil Ce was 3.38 (95% confidence interval 2.90-3.46) ng·mL-1. Median intubation time (min) was longer in failed smooth intubation than in smooth intubation (8.0 vs. 6.1, P=0.048). Eleven patients (58%) recalled the procedure and 16 patients (84%) rated their satisfaction score as good or excellent.

CONCLUSION

The estimated EC(95) of remifentanil Ce for smooth nasotracheal fibreoptic intubation with conscious sedation was 3.38 (95% CI 2.90-3.46) ng·mL-1 when used in combination with midazolam and topical lidocaine. Remifentanil TCI may provide a tolerable experience of awake fibreoptic intubation despite the high incidence of recall.

Effect of sunlight irradiation on photocatalytic pyrene degradation in contaminated soils by micro-nano size TiO2

The enhanced catalytic pyrene degradation in quartz sand and alluvial and red soils by micro-nano size TiO(2) in the presence and absence of sunlight was investigated. The results showed that the synergistic effect of sunlight irradiation and TiO(2) was more efficient on pyrene degradation in quartz sand and red and alluvial soils than the corresponding reaction system without sunlight irradiation. In the presence of sunlight irradiation, the photooxidation (without TiO(2)) of pyrene was very pronounced in alluvial and red soils and especially in quartz sand. However, in the absence of sunlight irradiation, the catalytic pyrene degradation by TiO(2) and the photooxidation (without TiO(2)) of pyrene were almost nil. This implicates that ultra-violet (UV) wavelength range of sunlight plays an important role in TiO(2)-enhanced photocatalytic pyrene degradation and in photooxidation (without TiO(2)) of pyrene. The percentages of photocatalytic pyrene degradation by TiO(2) in quartz sand, alluvial and red soils under sunlight irradiation were 78.3, 23.4, and 31.8%, respectively, at 5h reaction period with a 5% (w/w) dose of the amended catalyst. The sequence of TiO(2)-enhanced catalytic pyrene degradation in quartz sand and alluvial and red soils was quartz sand>red soil>alluvial soil, due to different texture and total organic carbon (TOC) contents of the quartz sand and other two soils. The differential Fourier transform infrared (FT-IR) spectra of degraded pyrene in alluvial soil corroborate that TiO(2)-enhanced photocatalytic degradation rate of degraded pyrene was much greater than photooxidation (without TiO(2)) rate of degraded pyrene. Based on the data obtained, the importance for the application of TiO(2)-enhanced photocatalytic pyrene degradation and associated organic contaminants in contaminated soils was elucidated.

CH2 b̃1B1-ã1A1 band origin at 1.20 μm

The origin band in the b̃(1)B(1)-ã(1)A(1) transition of CH(2) near 1.2 μm has been recorded at Doppler-limited resolution using diode laser transient absorption spectroscopy. The assignments of rotational transitions terminating in upper state levels with K(a) = 0 and 1, were confirmed by ground state combination differences and extensive optical-optical double resonance experiments. The assigned lines are embedded in a surprisingly dense spectral region, which includes a strong hot band, b̃(0,1,0) K(a) = 0 - ã(0,1,0) K(a) = 1 sub-band lines, with combination or overtone transitions in the ã(1)A(1) state likely responsible for the majority of unassigned transitions in this region. From measured line intensities and an estimate of the concentration of CH(2) in the sample, we find the transition moment square for the 0(00) ← 1(10) transition in the b̃(1)B(1)(0,0,0)(0)-ã(1)A(1)(0,0,0)(1) sub-band is 0.005(1) D(2). Prominent b̃(1)B(1)(0,1,0)(0)-ã(1)A(1)(0,1,0)(1) hot band lines were observed in the same spectral region. Comparison of the intensities of corresponding rotational transitions in the two bands suggests the hot band has an intrinsic strength approximately 28 times larger than the origin band. Perturbations of the excited state K(a) = 0 and 1 levels are observed and discussed. The new measurements will lead to improved future theoretical modeling and calculations of the Renner-Teller effect between the ã and b̃ states in CH(2).

Oxidative degradation of pyrene in contaminated soils by δ-MnO2 with or without sunlight irradiation

The enhanced oxidative degradation of pyrene in quartz sand and alluvial and red soils by micro-nano size birnessite (δ-MnO(2)) in the presence and absence of sunlight was investigated. The degradation of pyrene by δ-MnO(2) in quartz sand showed very little synergistic effect of sunlight irradiation on δ-MnO(2) oxidizing power. However, pyrene degradation by δ-MnO(2) in alluvial and red soils was greater under solar irradiation than the combination of photooxidation of pyrene and oxidation of pyrene by δ-MnO(2). The oxidative degradation percentages of pyrene by δ-MnO(2) under sunlight irradiation are 94.8, 97.7, and 100% for alluvial soil, red soil, and quartz sand, respectively. Oxidative degradation percentages of pyrene by δ-MnO(2) in alluvial and red soils with irradiation of sunlight almost attained a maximum at 1 h with a 5% (w/w) dose of the amended oxidant. Due to their different total organic carbon (TOC) contents, the sequence of enhanced oxidative degradation of pyrene by δ-MnO(2) in quartz sand and alluvial and red soils was quartz sand>red soil>alluvial soil. Further, this study revealed that δ-MnO(2)-enhanced oxidative degradation of pyrene is very pronounced in contaminated soils in situ even at deep soil layers where irradiation by sunlight is very limited.

Comparison of the effect-site concentrations of remifentanil for Streamlined Liner of the Pharynx Airway (SLIPA) versus laryngeal mask airway SoftSealTM insertion during target-controlled infusion of propofol

This study was designed to determine the optimal dose of remifentanil required for the successful insertion of Streamlined Liner of the Pharynx Airway (SLIPA) and to compare it to that required for laryngeal mask airway (LMA) insertion in patients receiving a propofol infusion at a standard effect-site concentration. Fifty-eight patients scheduled to undergo general anaesthesia were randomly assigned to either the SLIPA (n = 29) or LMA (n = 29) group. All patients were premedicated with midazolam 0.05 mg x kg(-1) and glycopyrrolate 0.004 mg x kg(-1) intramuscularly. After the administration of lignocaine 1 mg x kg(-1) intravenously, a propofol infusion was started at an effect-site concentration of 3.5 microg x ml(-1) with a remifentanil infusion without a neuromuscular blocking agent. The remifentanil dose was determined by the modified up-and-down method starting in each group at 4 ng x ml(-1). Six minutes after induction, the airway device was inserted. Airway device insertion was classified as 'success' or 'failure' based on patient response. From the isotonic regression analysis and bootstrap distribution, the EC50 of remifentanil for SLIPA and LMA were 0.93 ng x ml(-1) (95% confidence interval [CI] 0.81 to 1.50 ng x ml(-1) and 1.36 ng x ml(-1) (95% CI 1.19 to 2.06 ng x ml(-1)) respectively, and the EC95 for SLIPA and LMA insertions were 1.90 ng x ml(-1) (95% CI 1.39 to 1.95) and 2.43 ng x ml(-1) (95% CI 1.80 to 2.46 ng x ml(-1)) respectively. Using the 83% CIs from the bootstrap distribution, EC50 for SLIPA was significantly less than that of LMA (0.83 to 1.23 vs 1.26 to 2.00, respectively) (P < 0.05). These findings suggest that the insertion of SLIPA needs about a 32% lower depth of anaesthesia than LMA insertion.

Sub-Doppler spectroscopy of mixed state levels in CH(2)

Perturbations in the 7(16) and 8(18) mixed singlet/triplet levels of ã (1)A(1)(0,0,0) methylene, CH(2), have been reinvestigated by frequency-modulated laser sub-Doppler saturation spectroscopy. The hyperfine structure was completely resolved for both the predominantly singlet and the predominantly triplet components of these mixed rotational levels using b̃ (1)B(1)-ã (1)A(1) optical transitions near 12 200 cm(-1) with megahertz resolution. The mixing coefficients were obtained from the observed hyperfine splittings and a two-level deperturbation model. The analysis also determines the energy separation of the unperturbed zero-order levels and the unperturbed hyperfine splittings for the triplet perturbing levels 6(15) X̃ (3)B(1)(0,3,0) and 9(37) X̃ (3)B(1)(0,2,0).

Structure and function of a chloroplast DNA replication origin of Chlamydomonas reinhardtii

Chloroplast DNA replication in Chlamydomonas reinhardtii is initiated by the formation of a displacement loop (D-loop) at a specific site. One D-loop site with its flanking sequence was cloned in recombinant plasmids SC3-1 and R-13. The sequence of the chloroplast DNA insert in SC3-1, which includes the 0.42-kilobase (kb) D-loop region, as well as 0.2 kb to the 5' end and 0.43 kb to the 3' end of the D-loop region, was determined. The sequence is A+T-rich and contains four large stem-loop stuctures. An open reading frame potentially coding for a polypeptide of 136 amino acids was detected in the D-loop region. One stem-loop structure and two back-to-back prokaryotic-type promoters were mapped within the open reading frame. The 5.5-kb EcoRI fragment cloned in R-13 contains the 1.05-kb SC3-1 insert and its flanking regions. A yeast autonomously replicating (ARS) sequence and an ARC sequence, which promotes autonomous replication in Chlamydomonas, have been mapped within the flanking regions [Vallet, J.-M. & Rochaix, J.-D. (1985) Curr. Genet. 9, 321-324]. Both R-13 and SC3-1 were active as templates in a crude algal preparation that supports DNA synthesis. In this in vitro system, chloroplast DNA synthesis initiated near the D-loop site.

Cation binding by bacteriorhodopsin

We have found that extensively washed purple membrane has about 1 calcium and 3-4 magnesium ions bound per bacteriorhodopsin molecule. When these divalent cations are removed by any of a variety of means, the pigment changes its color from purple to blue (lambda(max) approximately 600 nm). This blue pigment, which can be formed at near neutral pH, is probably very similar to blue species formed when the pH of a purple membrane sample is lowered to approximately 2. When any of a wide variety of cations are added to a blue membrane preparation, the characteristic purple color of bacteriorhodopsin returns. Divalent and trivalent cations are much more efficient than monovalent cations in restoring the purple color and are effective at a ratio approaching one cation per pigment molecule. Besides shifting the absorption spectrum, removal of the divalent cations drastically alters the photochemical cycle of bacteriorhodopsin, including abolishing the unprotonated Schiff base (M-type) intermediate. Finally, lanthanum not only displaces the divalent cations normally bound to the purple membrane but also greatly reduces both the rate of decay of the M412 intermediate and proton uptake.

The pink membrane: the stable photoproduct of deionized purple membrane

When cations are removed from the purple membrane of Halobacterium halobium it turns blue (lambda(max) = 603 nm); continuous irradiation with intense red light (lambda's >/= 630 nm) converts this deionized blue membrane into a pink membrane (lambda(max) approximately 491 nm). The rate and extent of the transformation from the blue to the pink membrane is facilitated by the removal of the last twenty COOH-terminal amino acids of bacteriorhodopsin. While the chromophore of the blue membrane is a 32:68 mixture of the 13-cis and all-trans isomers of retinal, the chromophore of the pink membrane is 9-cis rectinal. The quantum efficiency of the pink to blue membrane photoconversion is relatively high compared with that of the blue to pink membrane photoconversion. Proton release is observed when the pink membrane is converted to the blue form, and proton uptake occurs during the reverse transition. Unlike the blue membrane, the absorbance maximum of the pink membrane is only slightly affected by cation addition at low pH and ionic strength.

Mechanism and role of divalent cation binding of bacteriorhodopsin

Several observations have already suggested that the carboxyl groups are involved in the association of divalent cations with bacteriorhodopsin (Chang et al., 1985). Here we show that at least part of the protons released from deionized purple membrane (;blue membrane') samples when salt is added are from carboxyl groups. We find that the apparent pK of magnesium binding to purple membrane in the presence of 0.5 mM buffer is 5.85. We suggest this is the pK of the carboxyl groups shifted from their usual pK because of the proton concentrating effect of the large negative surface potential of the purple membrane. Divalent cations may interact with negatively charged sites on the surface of purple membrane through the surface potential and/or through binding either by individual ligands or by conformation-dependent chelation. We find that divalent cations can be released from purple membrane by raising the temperature. Moreover, purple membrane binds only about half as many divalent cations after bleaching. Neither of these operations is expected to decrease the surface potential and thus these experiments suggest that some specific conformation in purple membrane is essential for the binding of a substantial fraction of the divalent cations. Divalent cations in purple membrane can be replaced by monovalent, (Na(+) and K(+)), or trivalent, (La(+++)) cations. Flash photolysis measurements show that the amplitude of the photointermediate, O, is affected by the replacement of the divalent cations by other ions, especially by La(+++). The kinetics of the M photointermediate and light-induced H(+) uptake are not affected by Na(+) and K(+), but they are drastically lengthened by La(+++) substitution, especially at alkaline pHs. We suggest that the surface charge density and thus the surface potential is controlled by divalent cation binding. Removal of the cations (to make deionized blue membrane) or replacement of them (e.g. La(+++)-purple membrane) changes the surface potential and hence the proton concentration near the membrane surface. An increase in local proton concentration could cause the protonation of critical carboxyl groups, for example the counter-ion to the protonated Schiff's base, causing the red shift associated with the formation of both deionized and acid blue membrane. Similar explanations based on regulation of the surface proton concentration can explain many other effects associated with the association of different cations with bacteriorhodopsin.

Type 2 diabetes prevalence and incidence among adults in Taiwan during 1999-2004: a national health insurance data set study

AIM

To evaluate annual prevalence and incidence of Type 2 diabetes and to examine possible trends among adults in Taiwan.

METHODS

A retrospective nationwide longitudinal study using the Taiwan National Health Insurance Research Database collected during 1999-2004. Adult patients aged > or = 20 years old with prevalent and incident Type 2 diabetes were identified using ICD-9-CM diagnostic codes. Age-specific and age-direct-standardized annual incidence and prevalence were calculated to describe their trends in different gender and age group and compared using Poisson regression.

RESULTS

During the study years, the age-standardized prevalence of Type 2 diabetes increased from 4.7 to 6.5% for men and from 5.3 to 6.6% for women. The increasing trends in prevalence were significant and higher among people aged < 40 and > or = 80 years. The age-standardized incidence rates of Type 2 diabetes per 1000 person-years were approximately 7.6 and remain stable for men, but decreasing from 7.7 to 6.9 for women. However, the incidence increased significantly in younger adults aged < 40 years whose relative incidence (RI with 95% confidence interval) was 1.31 (1.20-1.42) for men and 1.04 (1.01-1.08) for women. The incidence trends for people aged > or = 40 years were decreased for men and women. The differences in incidence trends between age groups and between genders were all statistically significant (all P < 0.001).

CONCLUSIONS

This study demonstrated a substantial increasing trend in Type 2 diabetes prevalence during 1999-2004 among adults in Taiwan. Despite the incidence decreased in older people, young men aged 20-40 years were most susceptible to higher incidence of Type 2 diabetes.

Spectroscopic investigation of the multiphoton photolysis reactions of bromomethanes (CHBr3, CHBr2Cl, CHBrCl2, and CH2Br2) at near-ultraviolet wavelengths

Nascent emission and laser-induced dispersed fluorescence spectra of products or intermediates from the multiphoton photolysis reaction of bromomethanes (CHBr(3), CHBr(2)Cl, CHBrCl(2), and CH(2)Br(2)) at 266 nm were recorded in a slow flow cell. Electronically excited species including CH (A(2)Delta, B(2)Sigma(-), and C(2)Sigma(+)), C(2) (d(3)Pi(g)), and atomic Br ((4)D(J) and (4)P(J)) were observed in the nascent emission spectra. Free radicals such CHBr or CHCl were also successfully found using laser-induced dispersed fluorescence spectroscopy. The reactive intermediate, CHBr, was seen only in the photolysis of CHBr(3), whereas CHCl was only discovered when the precursor was CHBr(2)Cl or CHBrCl(2). More experiments including the power dependence and temporal waveform measurements were conducted. The present study reports the first direct measurements of the intermediate products in the multiphoton photodissociation reaction of these bromomethanes at 266 nm. Nascent emission spectra following the photolysis at longer near-ultraviolet wavelengths (280 and 355 nm) were also acquired. On the bassis of these results, the multiphoton photodissociation mechanism of these bromomethanes at 266 nm can be confirmed.

Increase of plasma insulin by racecadotril, an inhibitor of enkephalinase, in Wistar rats

Racecadotril is known as an inhibitor of enkephalinase. Increase of plasma insulin by racecadotril has been observed in rats while the mechanism of the action remains obscure. In the present study, intravenous injection of male Wistar rats with racecadotril significantly decreased blood glucose levels. However, this effect of racecadotril was not modified by naloxone at the dose sufficient to block opioid receptors. Thus, the blood glucose-lowering action of racecadotril might be through an endogenous opioid independent mechanism. Otherwise, we found that C-peptide content was also raised by racecadotril in parallel with the increase of insulin in Wistar rats. Thus, the blood glucose-lowering action of racecadotril was related to insulin secretion, but not through the inhibition of plasma insulin degradation. In addition, racecadotril showed no direct effect on insulin secretion in isolated islets or cultured HIT-T15 beta cells. The increase of plasma insulin and blood glucose-lowering action induced by racecadotril were reduced by pretreatment with atropine and enhanced by physotigmine. Direct inhibition of cholinesterase was not observed in brain homogenates treated with racecadotril. Moreover, actions of racecadotril were significantly reduced in rats receiving hemicholinium-3 at a sufficient dose to decrease endogenous acetylcholine. Activation of cholinergic tone is possibly involved in the blood glucose-lowering effect of racecadotril. Our results suggested that racecadotril increased insulin secretion to lower blood glucose mainly via regulation of parasympathetic tone in Wistar rats.

Kinetics of growth and phosphate uptake in pure culture studies of Acinetobacter species

Acinetobacter has been found to be the major species responsible for mediating biological phosphate removal. The growth kinetics and phosphate uptake were investigated for an isolated Acinetobacter strain growing in a defined medium. The phosphate uptake is dependent on growth rate, temperature, and pH. Polyphosphate granules occurred in a balanced growth stage. The maximum phosphorus content in cells was 4.8% at the dilution rate of 12 day(-1). The specific phosphate uptake rate was found to be a quadratic polynomial function of the dilution rate. Increased calcium (up to 36 mg/L) and magnesium (up to 15 mg/L), and the addition of yeast extract (100 mg/L), primary effluent (20%), and fluoride (10 mg/L) did not affect phosphate uptake. Anaerobic conditioning (N(2) stripping), low pH (CO(2) stripping), and addition of sodium acetate under anaerobic conditions failed to stimulate immediate phosphate release. Nevertheless, After 21-24 h, the phosphate release was ca. 3, 5, and 15 mg P/g cell, respectively, for N(2) purging, the addition of acetate, and CO(2) purging. For two-stage completely stirred reactor operation, there was negligible phosphate overplus at the second reactor when phosphate was added, when the first reactor was subjected to phosphate limitation. When both phosphate and carbon limited the growth in the first reactor, there was slight phosphate accumulation under endogenous respiration conditions in the second reactor.

Oblique electron-beam evaporation of distinctive indium-tin-oxide nanorods for enhanced light extraction from InGaN/GaN light emitting diodes

This paper presents a novel and mass-producible technique to fabricate indium-tin-oxide (ITO) nanorods which serve as an omnidirectional transparent conductive layer (TCL) for InGaN/GaN light emitting diodes (LEDs). The characteristic nanorods, prepared by oblique electron-beam evaporation in a nitrogen ambient, demonstrate high optical transmittance (T>90%) for the wavelength range of 450nm to 900nm. The light output power of a packaged InGaN/GaN LED with the incorporated nanorod layer is increased by 35.1% at an injection current of 350mA, compared to that of a conventional LED. Calculations based on a finite difference time domain (FDTD) method suggest that the extraction enhancement factor can be further improved by increasing the thickness of the nanorod layer, indicating great potential to enhance the luminous intensity of solid-state lighting devices using ITO nanorod structures.

Phosphodiesterase inhibition by naloxone augments the inotropic actions of beta-adrenergic stimulation

BACKGROUND

In a shock state, naloxone generates the cardiovascular pressor effect by displacing the endogenous opiate-like peptide beta-endorphin, resulting in restoration of the normal response to catecholamines. In addition to this opioid antagonistic effect, the non-opiate receptor-mediated effect has also been proposed. The aim of this study was to define the mechanism of non-opiate receptor-mediated action of naloxone.

METHODS

In guinea-pig ventricular tissues, cumulative concentration-response curves for isoproterenol as well as for forskolin and 3-isobutylmethylxanthine (IBMX) were obtained by increasing the concentration stepwise. To assess the effect on the phosphodiesterase (PDE), the effects of naloxone on contractile forces induced by isoproterenol (0.05 microM) in the presence of IBMX, cilostamide (a PDE III inhibitor), or rolipram (a PDE IV inhibitor) were observed. Naloxone-induced changes in cAMP production by isoproterenol both in the absence and in the presence of IBMX were measured. Naloxone-induced changes in cAMP production by forskolin in the presence of IBMX were also measured.

RESULTS

Naloxone (30 microM) produced a leftward shift of the isoproterenol concentration-response curve (0.01-2 microM) without changing the maximal response. Forskolin (0.5-10 microM) produced a concentration-dependent increase in contractile forces. Naloxone increased the maximal inotropic response of forskolin. Naloxone showed no effect on the IBMX concentration-response curve. In the presence of IBMX (200 microM), naloxone did not alter the contractions evoked by isoproterenol or forskolin. Whereas naloxone increased contractile forces significantly (approximately 25%) more than that of isoproterenol in the presence of rolipram, no alteration of contractile forces in the cilostamide-incubated muscles was observed. Naloxone caused a concentration-related increase of cAMP in the absence of IBMX, but caused no change in its presence.

CONCLUSIONS

The enhancement of myocardial contractility by naloxone in the presence of stimulation of adenylyl cyclase activity appears to be mediated by inhibition of PDE, specifically PDE III.

Full-length sequence analysis of a distinct isolate of Bidens mottle virus infecting sunflower in Taiwan

The full-length genome of a potyvirus, previously known as sunflower chlorotic spot virus isolate SF-1 (SCSV-SF-1) which causes novel symptoms on sunflowers (Helianthus annuus), was sequenced and analyzed. The genome of SCSV-SF-1 is 9,741 nucleotides long, encoding a polyprotein of 3,071 amino acids containing the consensus motifs of potyviruses. Sequence comparison revealed that the 3'-terminus of SCSV-SF-1 shared over 96% similarities with isolates of Bidens mottle virus (BiMoV). However, SCSV-SF-1 has a very narrow host range, excluding the diagnostic host species for BiMoV, Bidens pilosa and Zinnia elegans. Therefore, SCSV-SF-1 is a distinct isolate of BiMoV. This is the first report of the full-length nucleotide sequence of BiMoV infecting sunflower in Taiwan.

A CMOS neuroelectronic interface based on two-dimensional transistor arrays with monolithically-integrated circuitry

The ability to monitor and to elicit neural activity with a high spatiotemporal resolution has grown essential for studying the functionality of neuronal networks. Although a variety of microelectrode arrays (MEAs) has been proposed, very few MEAs are integrated with signal-processing circuitry. As a result, the maximum number of electrodes is limited by routing complexity, and the signal-to-noise ratio is degraded by parasitics and noise interference. This paper presents a single-chip neuroelectronic interface integrating oxide-semiconductor field-effect transistors (OSFETs) with signal-processing circuitry. After the chip was fabricated with the standard complementary-metal-oxide-semiconductor (CMOS) process, polygates of specific transistors were etched at die-level to form OSFETs, while metal layers were retained to connect the OSFETs into two-dimensional arrays. The complete removal of polygates was confirmed by high-resolution image scanners, and the reliability of OSFETs was examined by measuring their electrical characteristics. Through a gate oxide of only 7nm thick, each OSFET can record and stimulate neural activity extracellularly by capacitive coupling. The capability of the full chip in neural recording and stimulation was further experimented using the well-characterised escape circuit of the crayfish. Experimental results indicate that the OSFET-based neuroelectronic interface can be used to study neuronal networks as faithfully as conventional electrophysiological tools. Moreover, the proposed simple, die-level fabrication process of the OSFETs underpins the development of various field-effect biosensors on a large scale with on-chip circuitry.