Adhesive bonding of a lithium disilicate ceramic material with resin-based luting agents

This study evaluates the bonding characteristics of a lithium disilicate-based ceramic material (IPS Empress 2). Two sizes of disk specimens of the material were made, and three groups of disk pairs were separately surface-prepared using three techniques; etching with phosphoric acid, etching with hydrofluoric acid, and air-abrasion with alumina. Each group was further divided into four sub-groups; group (i) was bonded with the Variolink II composite, (ii) was treated with the Monobond-S silane primer and bonded with the Variolink II composite, (iii) was bonded with the Super-Bond acrylic adhesive and (iv) was treated with the Porcelain Liner M silane primer and bonded with the Super-Bond acrylic adhesive. Shear bond strengths were determined before and after 100 000 thermocycles. Bond strength varied from 10.6 to 71.5 MPa before thermocycling, whereas post-thermocycling bond strength ranged from 0 to 61.2 MPa. Among the three surface preparations, hydrofluoric acid etching (HF) was most effective in enhancing bond strength of both luting materials, especially for unsilanized specimens. Application of the silane primer elevated bond strength of both luting agents regardless of surface preparation method. It can be concluded, for both luting agents, that durable bond to the Empress 2 ceramic material can be achieved through the combined application of HF and the proprietary silane primer.

Molecular linkage mapping and phylogeny of the chalcone synthase multigene family in soybean

Chalcone synthase (CHS), the key enzyme in the flavonoid biosynthesis pathway, is encoded by a multigene family, CHS1-CHS8 and dCHS1 in soybean. A tandem repeat of CHS1, CHS3 and CHS4, and dCHS1 that is believed to be located in the vicinity comprises the I locus that suppresses coloration of the seed coat. This study was conducted to determine the location of all CHS members by using PCR-based DNA markers. Primers were constructed based on varietal differences in either the nucleotide sequence of the 5'-upstream region or the first intron of two cultivars, Misuzudaizu, with a yellow seed coat (II), and Moshidou Gong 503, with a brown seed coat (ii). One hundred and fifty recombinant inbred lines that originated from a cross between these two cultivars were used for linkage mapping together with 360 markers. Linkage mapping confirmed that CHS1, CHS3, CHS4, dCHS1, and the I locus are located at the same position in molecular linkage group (MLG) A2. CHS5 was mapped at a distance of 0.3 cM from the gene cluster. CHS2 and CHS6 were located in the middle region of MLGs A1 and K, respectively, while CHS7 and CHS8 were found at the distal end of MLGs D1a and B1, respectively. Phylogenetic analysis indicated that CHS1, CHS3, CHS4, and CHS5 are closely related, suggesting that gene duplication may have occurred repeatedly to form the I locus. In addition, CHS7 and CHS8 located at the distal end and CHS2, CHS6, and CHS members around the I locus located around the middle of the MLG are also related. Ancient tetraploidization and repeated duplication may be responsible for the evolution of the complex genetic loci of the CHS multigene family in soybean.

Arrangement of high-energy neutron irradiation field and shielding experiment using 4 m concrete at KENS

An irradiation field of high-energy neutrons produced in the forward direction from a thick tungsten target bombarded by 500 MeV protons was arranged at the KENS spallation neutron source facility. In this facility, shielding experiment was performed with an ordinary concrete shield of 4 m thickness assembled in the irradiation room, 2.5 m downstream from the target centre. Activation detectors of bismuth, aluminium, indium and gold were inserted into eight slots inside the shield and attenuations of neutron reaction rates were obtained by measurements of gamma-rays from the activation detectors. A MARS14 Monte Carlo simulation was also performed down to thermal energy, and comparisons between the calculations and measurements show agreements within a factor of 3. This neutron field is useful for studies of shielding, activation and radiation damage of materials for high-energy neutrons, and experimental data are useful to check the accuracies of the transmission and activation calculation codes.

Serial analysis of gene expression (SAGE) of host-plant resistance to the cassava mosaic disease (CMD)

Cassava mosaic disease (CMD) is a viral disease of the important tropical staple crop cassava (Manihot esculenta) and preferred management involves use of host-plant resistance. The best available resistance is controlled by a single dominant gene. Serial analysis of gene expression (SAGE) was used to analyze the gene expression pattern in a bulk of 40 each of CMD resistant and susceptible genotypes drawn from a gene mapping progeny. Messenger RNA used for the SAGE analysis came from plants that were exposed to heavy disease pressure over a period of 2 years in the field. A total of 12,786 tags were studied, divided into 5733 and 7053 tags from the resistant and susceptible genotypes, respectively. Tag annotation was by PCR amplification using the tag sequence as sense primer and 4000 cassava ESTs generated from the bulk of CMD resistant genotypes. Annotation of more than 30 differentially expressed tags revealed several genes expressed during systemic acquired resistance (SAR) in plants and other genes involved in cell-to-cell and cytoplasm-to-nucleus virus trafficking. Differential expression of the most abundantly expressed tag, corresponding to a beta-tubulin gene, was confirmed by Northern Analysis. RFLP analysis of the tags in the parents and bulks of the CMD mapping progeny revealed only one tag, a WRKY transcription factor, associated with the region bearing the dominant CMD gene.

One-year clinical evaluation of two composite materials used for anterior class V restorations

The purpose of the current study was to evaluate the clinical performance of two composite materials used for filling anterior cavity preparations. A total of 100 class V cavities of anterior tooth were restored with two different composite materials (Palfique Estelite and Palfique Toughwell, 50 cavities each, respectively) in combination with the same bonding agent (Mac Bond II). Colour match, cavosurface marginal discolouration, recurrent caries, wear, marginal integrity and surface texture were evaluated clinically for all restorations on the basis of the United States Public Health Service (USPHS) criteria immediately after insertion (baseline), after 6 months and after 1 year. In the comparison of baseline to 1-year evaluation, the Palfique Toughwell material showed significant changes in all factors except recurrent caries. The Palfique Estelite material, however, showed neither significant cavosurface marginal discolouration nor recurrent caries. No significant difference (P > 0b05) was observed between the two materials in clinical performance after 1 year, with the exception of caries rate, which was found to be significantly lower in the Palfique Estelite material. It was concluded that both composites were clinically reliable materials when used for anterior class V restorations.

Effectiveness of two-liquid silane primers on bonding sintered feldspathic porcelain with a dual-cured composite luting agent

The purpose of the current study was to evaluate the effect of two-component ceramic primers on the bond strength of a composite material joined to a sintered porcelain material. Two sizes of porcelain discs (VMK 68; 10 and 8 mm in diameter by 2.5 mm thick) were ground (No. 1000 SiC), and surface-conditioned using one of the following systems: (i) unprimed, (ii) Liquid A of the Porcelain Liner M material (PLM-A), (iii) Liquid B of Porcelain Liner M (PLM-B), (iv) Liquids A and B of Porcelain Liner M (PLM-AB), (v) Liquid A of the Tokuso Ceramics Primer material (TCP-A), (vi) Liquid B of Tokuso Ceramics Primer (TCP-B) and (vii) Liquids A and B of Tokuso Ceramics Primer (TCP-AB). All specimens were bonded with the Bistite II dual-cured composite luting agent, and shear bond strengths were determined both after 24 h immersion in water and after subsequent thermocycling (4-60 degrees C, 1 min each, 20,000 cycles). Of the seven groups assessed, two groups (PLM-AB and TCP-AB) showed the greatest bond strength both before (30.7 MPa for PLM-AB and 29.7 MPa for TCP-AB) and after (19.7 MPa for PLM-AB and 22.4 MPa for TCP-AB) thermocycling (P < 0.05). No significant differences were found between the PLM-AB and TCP-AB groups regardless of the application of thermocycling (P > 0.05). It can be concluded that both of the acid-catalysed two-liquid ceramic primers showed superior bonding to the unhydrolysed single-liquid silane agents (PLM-B and TCP-A) when the feldspathic porcelain was bonded with the Bistite II luting composite.

Comparative strength of metal-ceramic and metal-composite bonds after extended thermocycling

The relative strengths of ceramic-to-metal and composite-to-metal bonds were compared after prolonged thermocycling. A total of 104 cast discs were produced from a gold alloy (Pontor LFC). A ceramic material (Duceragold) was fused to 24 discs to assess the strength of the metal-ceramic bond. An indirect composite material (New Metacolor Infis) was bonded to the remaining discs after surface preparation by Rocatec tribochemical coating, tin plating and priming with a phosphate conditioner [10-methacryloyloxydecyl dihydrogen phosphate (MDP), Cesead II], priming with a thione conditioner (V-Primer) or no treatment (unprimed control). Shear bond strengths were determined before and after thermocycling at 20,000 and 100,000 cycles. Pre-thermocycling bond strengths were ranked in the order: metal-ceramic (40.5 MPa); Rocatec treatment (33.1 MPa) and tin plating-MDP (31.0 MPa); V-Primer (20.9 MPa); and control (11.9 MPa). The bond strengths of the first three groups were not significantly different after 20,000 thermocycles, whereas those of the V-Primer and control groups were significantly reduced. After extended thermocycling (100,000 cycles) the metal-ceramic group had the highest mean shear bond strength (28.5 MPa; P < 0.05), followed by the Rocatec (23.9 MPa) and tin plating-MDP (22.1 MPa) groups. The metal-ceramic bond was the most durable, although its strength was reduced by 29.6% after extended thermocycling. On the basis of these results, we recommend the Rocatec and tin plating-MDP systems for composite-to-metal bonding. Metal-ceramic bonding, however, is superior to metal-composite bonding within the limitation of the current experiment.

Protein adsorption at polymer-grafted surfaces: comparison between a mixture of saliva proteins and some well-defined model proteins

Grafting a dense layer of soluble polymers onto a surface is a well-established method for controlling protein adsorption. In the present study, polyethylene oxide (PEO) layers of three different grafting densities were prepared, i.e. 10-15 nm2, 5.5 nm2 and 4 nm2 per polymer chain, respectively. The adsorption of different proteins on the PEO grafted surfaces was measured in real time by reflectometry. Furthermore, the change of the zeta-potential of such surfaces resulting from adsorption of the proteins was determined using the streaming potential method. Both the protein adsorption and the zeta-potential were monitored for 1 h after exposure of the protein solution to the surface. The adsorption pattern for a mixture of saliva proteins was compared to those observed for a number of well-defined model-proteins (lysozyme, human serum albumin, beta-lactoglobulin and ovalbumin). The results of the adsorption kinetics and streaming potential measurements indicate that the effect of the PEO layer on protein adsorption primarily depends on the size and the charge of the protein molecules. The saliva proteins are strongly blocked for adsorption, whereas the change in the zeta-potential is larger than for the other proteins (except lysozyme). It is concluded that positively charged protein molecules, having dimensions larger than those of lysozyme, are involved in the initial stage of adsorption from saliva onto a negatively charged surface.

Serial Analysis of Gene Expression (SAGE) of Magnaporthe grisea: genes involved in appressorium formation

Treatment with cyclic AMP (cAMP) induces appressorium formation in the phytopathogenic fungus Magnaporthe grisea, the causative agent of rice blast disease. In a search for the M. grisea genes responsible for appressorium formation and host invasion, SAGE (Serial Analysis of Gene Expression) was carried out using mRNA isolated from fungal conidia germinating in the presence and absence of cAMP. From cAMP-treated conidia 5087 tags including 2889 unique tags were isolated, whereas untreated conidia yielded 2342 unique tags out of total of 3938. cAMP treatment resulted in up- and down-regulation of genes corresponding to 57 and 53 unique tags, respectively. Upon consultation of EST/cDNA databases, 22 tags with higher representation in cAMP-treated conidia were annotated with putative gene names. Furthermore, 28 tags corresponding to cAMP-induced genes could be annotated with the help of the recently published genome sequence of M. grisea. cAMP-induced genes identified by SAGE included many genes that have not been described so far, as well as a number of genes known to be involved in pathogenicity, e.g. MPG1, MAS1 and MAC1. RT-PCR of 13 randomly selected genes confirmed the SAGE results, verifying the fidelity of the SAGE data.

Properties of dual-curable luting composites polymerized with single and dual curing modes

The purpose of this study was to evaluate the influence of visible-light exposure on water absorption, solubility and colour stability of dual-curable luting composites. Using eight dual-curable luting composites (2bond2, Bistite II, G-CERA Cosmotech II, Imperva Dual, Linkmax, Lute-It, Panavia Fluoro Cement and Variolink II), disk specimens were prepared by the following two methods: (i) dual-cured specimens; exposed with visible-light from a light-curing unit, and (ii) chemical-cured specimens; chemically polymerized without exposure. Five specimens were produced for each material and curing mode. Water absorption and solubility were determined according to standardized testing methods, and the data were compared using analysis of variance (ANOVA) and contrasts. With regard to colour stability, the colour difference (DeltaE*) values between 24 h and the other immersion periods (1, 2, 3, 4, 8, 12, 16, 20 and 24 weeks) were calculated and then analysed by repeated measure ANOVA. The dual-cured specimens exhibited significantly lower solubility values than the chemical-cured specimens except for the Lute-It material. The dual-cured Linkmax material exhibited the lowest solubility (0.51 +/- 0.01 microg mm(-3)) and the lowest DeltaE* value after 24 weeks (2.64 +/- 0.39). The dual-curable luting composites should be light-exposed after seating of restorations in order to reduce water absorption and solubility, and to improve colour stability.

Properties of a new photo-activated composite polymerized with three different laboratory photo-curing units

This study determined the hardness, solubility and curing depth of a new photo-activated composite polymerized with three different laboratory photo-curing units for the purpose of evaluating the post-curing properties of the material. A new photo-activated composite material for both direct and indirect applications (DiamondCrown) was polymerized with three photo-curing units equipped with the following light sources: (i) two halogen lamps (DiamondLite-VL. Halogen Light Curing Booth); (ii) two metal halide lamps (Hyper LII) and (iii) two xenon stroboscopic tubes (UniXS II). Knoop hardness, water solubility and curing depth were determined for groups of five specimens according to standardized testing methods. All data were compared using analysis of variance (anova) and Scheffe's S intervals (P < 0.05). The Knoop hardness number (KHN) generated with the metal halide unit (63.3 +/- 2.4 KHN) was statistically (P < 0.05) greater than those produced by the other two curing units. Water solubility values for both the halogen unit (2.5 +/- 0.5 microg mm(-3)) and the metal halide unit (2.5 +/- 0.5 microg mm(-3)) were significantly (P < 0.05) lower than for the xenon unit (3.8 +/- 0.5 microg mm(-3)). Of the three photo-curing units, the metal halide curing-unit consistently exhibited the greatest depth of cure. The composite material appears to be reliable, although its post-curing properties were found to be influenced by the type of curing unit.

Adhesive bonding of super-elastic titanium-nickel alloy castings with a phosphate metal conditioner and an acrylic adhesive

The purpose of the current study was to evaluate the bonding characteristics of super-elastic titanium-nickel (Ti-Ni) alloy castings. Disk specimens were cast from a Ti-Ni alloy (Ti-50.85Ni mol%) using an arc centrifugal casting machine. High-purity titanium and nickel specimens were also prepared as experimental references. The specimens were air-abraded with alumina, and bonded with an adhesive resin (Super-Bond C & B). A metal conditioner containing a phosphate monomer (Cesead II Opaque Primer) was also used for priming the specimens. Post-thermocycling average bond strengths (MPa) of the primed groups were 41.5 for Ti-Ni, 30.4 for Ti and 19.5 for Ni, whereas those of the unprimed groups were 21.6 for Ti, 19.3 for Ti-Ni and 9.3 for Ni. Application of the phosphate conditioner elevated the bond strengths of all alloy/metals (P < 0.05). X-ray fluorescence analysis revealed that nickel was attached to the debonded resin surface of the resin-to-nickel bonded specimen, indicating that corrosion of high-purity nickel occurred at the resin-nickel interface. Durable bonding to super-elastic Ti-Ni alloy castings can be achieved with a combination of a phosphate metal conditioner and a tri-n-butylborane-initiated adhesive resin.

Overexpression of Bax inhibitor suppresses the fungal elicitor-induced cell death in rice (Oryza sativa L) cells

Treatment of suspension-cultured cells of rice (Oryza sativa L.) with cell wall extract of rice blast fungus (Magnaporthe grisea) elicits a rapid generation of H2O2, alkalinization of culture medium, and eventual cell death. To elucidate genes involved in these processes, we exploited SAGE (Serial Analysis of Gene Expression) technique for the molecular analysis of cell death in suspension-cultured cells treated with the elicitor. Among the downregulated genes in the elicitor-treated cells, a BI-1 gene coding for Bax inhibitor was identified. Transgenic rice cells overexpressing Arabidopsis BI-1 gene showed sustainable cell survival when challenged with M. grisea elicitor. Thus, the plant Bax inhibitor plays a functional role in regulating cell death in the rice cell culture system.

Surface treatment of dentin with GLUMA and iron compounds for bonding indirect restorations

The purpose of this study was to evaluate five dentin bonding systems simulating indirect restorations. The surface of bovine and human dentin was primed with a glutaraldehyde agent (GLUMA) and placed in a humidor at 37 degrees C for 168 h. In an experimental bonding system (GLUMA/CY/SB), the surfaces were etched with phosphoric acid, primed with cytochrome c, and then bonded to an acrylic rod with a self-curing resin (4-META/MMA-TBB). Specimens using two commercially available bonding systems [All-Bond 2 (AB2) and Super-Bond C & B (10-3/SB)] and two controls with and without GLUMA (GLUMA/10-3/SB and CY/SB) were also prepared. Tensile testing revealed that the bond strengths were influenced by the bonding system, 168 h dentin exposure and their interaction, but not by the tooth origin. AB2 showed the lowest bond strength. With the 10-3/SB system, exposing the dentin to humidity resulted in a decrease in bond strength. After 168 h of exposure, no significant differences were observed between 10-3/SB and CY/SB. The most effective bonding was obtained with the bonding systems of GLUMA/10-3/SB and GLUMA/CY/SB. Improved outcome is expected with these bonding systems when building up abutment teeth with indirect restorations.

Alterations of quantitative EEG and mini-mental state examination in interferon-alpha-treated hepatitis C

We have recently observed a diffuse slowing of brain waves using serial quantitative electroencephalographic (qEEG) examinations in interferon (IFN)-alpha-treated chronic hepatitis C patients. However, it remains unclear how this alteration could be assessed. We evaluated the correlation between the qEEG changes and three tests of mental status, including the Mini-Mental State Examination (MMSE), in such patients. This is the first study to undertake a clinical evaluation of the adverse effects on brain function due to IFN. We undertook blind, prospective and serial qEEG examinations on 56 chronic hepatitis C patients at three independent hospitals. IFN-alpha was administered intramuscularly at a dose of 9 x 10(6) IU daily for the first 4 weeks and then 3 times/week for the next 20 weeks. Serial EEGs were obtained before, at 2 and 4 weeks of treatment, and after the IFN-alpha treatment. The absolute power values of each frequency band in each patient at different stages of treatment were recorded by qEEG. Each patient was assessed by the MMSE, Hamilton Rating Scale for Depression (HSD), and Hamilton Rating Scale for Anxiety (HSA). We statistically evaluated the correlations between the changes in power values and alterations of scores on the mental status tests during IFN-alpha treatment. The decreased scores observed on the MMSE ranged from 2 to 5 points at both 2 and 4 weeks of IFN-alpha treatment. There were no significant differences in age distribution for each decreased score on the MMSE. As the alteration in MMSE score during IFN treatment increased, the alteration in absolute power values for the slow waves during IFN treatment increased significantly, while that for the alpha 2 and fast waves during treatment decreased significantly. However, the changes in the HDS and HSA revealed no significant correlations. The alteration of the qEEG was reversible after the treatment. MMSE scores represent one screening method for the clinical assessment of IFN-alpha-induced alterations of brain function.

Dermatome setting for autografts to cover INTEGRA

Using the INTEGRA Dermal Regeneration Template requires the outer silastic layer to be replaced with an autograft. We followed the manufacturer's directions for epidermal autografting and frequently obtained shredded, useless grafts, therefore, it seemed important to determine the proper dermatome setting. We evaluated dermatome settings from 0.002 to 0.012 inches. First, with feeler gauges, we verified the dermatome settings. Second, we harvested skin at various dermatome settings and measured the thickness histologically. We found that 1) the dermatome settings are reasonably accurate; 2) harvesting useful sheets at 0.002 and 0.004 inches is virtually impossible; 3) the variability of histologic graft thickness is enormous; and 4) a dermatome setting of 0.006 inches yields useful grafts. We no longer use the term epidermal autografting but rather ultrathin split-thickness grafting. To harvest these grafts, we now merely set the dermatome to 0.006 inches and make whatever midcourse corrections are necessary to obtain translucent grafts.

Dermatome setting for autografts to cover INTEGRA

Using the INTEGRA Dermal Regeneration Template requires the outer silastic layer to be replaced with an autograft. We followed the manufacturer's directions for epidermal autografting and frequently obtained shredded, useless grafts, therefore, it seemed important to determine the proper dermatome setting. We evaluated dermatome settings from 0.002 to 0.012 inches. First, with feeler gauges, we verified the dermatome settings. Second, we harvested skin at various dermatome settings and measured the thickness histologically. We found that 1) the dermatome settings are reasonably accurate; 2) harvesting useful sheets at 0.002 and 0.004 inches is virtually impossible; 3) the variability of histologic graft thickness is enormous; and 4) a dermatome setting of 0.006 inches yields useful grafts. We no longer use the term epidermal autografting but rather ultrathin split-thickness grafting. To harvest these grafts, we now merely set the dermatome to 0.006 inches and make whatever midcourse corrections are necessary to obtain translucent grafts.