Reversible dispersion of single-walled carbon nanotubes based on a CO2-responsive dispersant

A CO(2)-responsive dispersant, N,N-dimethyl-N'-(pyren-1-ylmethyl) acetimidamidinium (PyAH(+)), which bears both a pyrene moiety and an amidinium cation, has been successfully synthesized. Through strong π-π interaction between the pyrene moiety and single-walled carbon nanotubes (SWNTs), we have demonstrated that PyAH(+) can be modified onto SWNT surfaces to promote the dispersion of SWNTs in water. Furthermore, taking advantage of gas triggered interconversions between the amidinium cation and amidine, reversible control on the solubility of SWNTs has been achieved simply through alternated bubbling of CO(2) and Ar. This work has demonstrated a new method for controlled dispersion and aggregation of SWNTs, and it may contribute to the development of gas responsive carbon materials.

Cu filtration for dose reduction in neonatal chest imaging

As neonatal chest images are frequently acquired to investigate the life-threatening lung diseases in prematurely born children, their optimisation in terms of X-ray exposure is required. The aim of this study was to investigate whether such dose-optimisation studies could be performed using a Monte Carlo computer model. More specifically, a Monte Carlo computer model was used to investigate the influence of Cu filtration on image quality and dose in neonatal chest imaging. Monte Carlo simulations were performed with the MCNPX code and used with voxel models representing prematurely born babies (590 and 1910 g). Physical image quality was derived from simulated images in terms of the signal difference-to-noise ratio and signal-to-noise ratio (SNR). To verify the simulation results, measurements were performed using the Gammex 610 Neonatal Chest Phantom, which represents a 1-2 kg neonate. A figure of merit was used to assist in evaluating the optimum balance between the image quality and the patient dose. The results show that the Monte Carlo computer model to investigate dose and image quality works well and can be used in dose-optimisation studies for real clinical practices. Furthermore, working at a specific constant incident air kerma (K(a,I)), additional filtration proved to increase SNR with 30 %, whereas working at a specific constant detector dose, extra Cu filtration reduces the lung dose with 25 %. Optimum balance between patient dose and image quality is found to be 60 kVp (using extra filtration).

Stimuli-responsive wettability of nonplanar substrates: pH-controlled floatation and supporting force

We have prepared pH-responsive planar and nonplanar substrates by chemical modification of a rough gold surface with pH-responsive 2-(11-mercaptoundecanamido)benzoic acid (MUABA). The rough surface exhibits a pH-responsive behavior with an exceptionally large change in contact angle (CA) as a function of the pH, from nearly superhydrophobic (CA of about 144 degrees ) to superhydrophilic (CA of near 0 degrees ). The relationship between pH and the supporting force of gold threads coated by MUABA has been investigated. The pH-responsive coating on the gold thread can provide bigger supporting forces at low pH than at high pH due to the hydrophobicity in the former case. In addition, the change of surface wettability can influence its floatation as well, therefore providing a new approach for controlling the motion of gold threads on water.

Metal-ligand coordination-induced self-assembly of bolaamphiphiles bearing bipyrimidine

A new type of bolaamphiphile bearing bipyrimidine (bpym-8) has been designed and synthesized. The bipyrimidine moiety allows for metal-ligand coordination, thereby influencing the self-assembly of the bolaamphiphile. Before coordination, bpym-8 self-assembles in water to form spherical aggregates. An interesting finding is that the coordination of the Cu(II) ion with bipyrimidine can induce the assembly of bpym-8 to change from spheres to clustered aggregates. It should be noted that the assembly of bpym-8 can be reversibly converted back by removing the Cu(II) ion from the coordination. This study presents a new type of bolaamphiphile that is able to coordinate with metal ions, which may provide a new clue in fabricating reversibly tunable supramolecular nanomaterials.

Expeditive syntheses of functionalized pentahelicenes and NC-AFM on Ag(001)

One of the shortest and most efficient routes toward a series of functionalized pentahelicenes is reported. Benzylic (dibromo)methine coupling is an important entry into functional helicene chemistry. It allowed a mono- or a double functionalization by some metal-catalyzed Ar-C, Ar-S, Ar-CN, and Ar-I bond formations. Those functions offer new avenues for further applications. For instance, helicene (4) can be supported on a Ag(001) surface, which was characterized by high-resolution NC-AFM imaging.

Facile reversible UV-controlled and fast transition from emulsion to gel by using a photoresponsive polymer with a malachite green group

In this paper we describe the facile reversible UV-controlled and fast transition from emulsion to gel by using a photoresponsive polymer with a malachite green group. The photoresponsive polymer with the hydrophobic malachite green group can be used for the formation of an oil-in-water emulsion. However, upon UV irradiation of 5 min, the photochromic malachite green group could be ionized to its corresponding cation, leading to the transformation from emulsion to gel. Upon shaking, such gel can recover the emulsion state, and further UV irradiation can turn the emulsion into gel again. Such transition from emulsion to gel by photochemical reaction and reverse shaking treatment can be repeated several times. It is anticipated greatly that this line of research may provide new insight into the mechanism behind stimuli-responsive systems, facilitating the design and synthesis of new responsive molecules for the fabrication of stimuli-responsive materials with designed functions.

Light-controlled single-walled carbon nanotube dispersions in aqueous solution

We have succeeded in dispersing single-walled carbon nanotubes (SWNTs) into an aqueous solution of poly(ethylene glycol)-terminated malachite green derivative (PEG-MG) through simple sonication. It was found that UV exposure caused reaggregation of these predispersed SWNTs in the same aqueous medium, as adsorbed PEG-MG photochromic chains could be effectively photocleavaged from the nanotube surface. The observed light-controlled dispersion and reaggragation of SWNTs in the aqueous solution should facilitate the development of SWNT dispersions with a controllable dispersity for potential applications.

Patient dose in neonatal units

Lung disease represents one of the most life-threatening conditions in prematurely born children. In the evaluation of the neonatal chest, the primary and most important diagnostic study is therefore the chest radiograph. Since prematurely born children are very sensitive to radiation, those radiographs may lead to a significant radiation detriment. Hence, knowledge of the patient dose is necessary to justify the exposures. A study to assess the patient doses was started at the neonatal intensive care unit (NICU) of the University Hospital in Leuven. Between September 2004 and September 2005, prematurely born babies underwent on average 10 X-ray examinations in the NICU. In this sample, the maximum was 78 X-ray examinations. For chest radiographs, the median entrance skin dose was 34 microGy and the median dose area product was 7.1 mGy.cm(2). By means of conversion coefficients, the measured values were converted to organ doses. Organ doses were calculated for three different weight classes: extremely low birth weight infants (<1000 g), low birth weight infants (1000-2500 g) and normal birth weight infants (>2500 g). The doses to the lungs for a single chest radiograph for infants with extremely low birth weights, low birth weights and normal birth weights were 24, 25 and 32 microGy, respectively.

Stability of mixed PEO-thiol SAMs for biosensing applications

The secret of a successful affinity biosensor partially hides in the chemical interface layer between the transducer system and the biological receptor molecules. Over the past decade, several methodologies for the construction of such interface layers have been developed on the basis of the deposition of self-assembled monolayers (SAMs) of alkanethiols on gold. Moreover, mixed SAMs of polyethylene oxide (PEO) containing thiols have been applied for the immobilization of biological receptors. Despite the intense research in the field of thiol SAMs, relatively little is known about their biosensing properties in correlation with their long-term stability. Especially the impact of the storage conditions on their biosensing characteristics has not been reported before to our knowledge. To address these issues, we prepared mixed PEO SAMs and tested their stability and biosensing performance in several storage conditions, i.e., air, N2, ethanol, phosphate buffer, and H2O. The quality of the SAMs was monitored as a function of time using various characterization techniques such as cyclic voltammetry, contact angle, grazing angle Fourier-transform infrared spectroscopy, and X-ray photoelectron spectroscopy. In addition, the impact of the different storage conditions on the biosensor properties was investigated using surface plasmon resonance. Via the latter technique, the receptor immobilization, the analyte recognition, and the nonspecific binding were extensively studied using the prostate specific antigen as a model system. Our experiments showed that very small structural differences in the SAM can have a great impact in their final biosensing properties. In addition it was shown that the mixed SAMs stored in air or N2 are very stable and retain their biosensor properties for at least 30 days, while ethanol appeared to be the worst storage medium due to partial oxidation of the thiol headgroup. In conclusion, care must be taken to avoid SAM degradation during storage to retain typical SAM characteristics, which is very important for their general use in many proposed applications.

Reversible self-organization of a UV-responsive PEG-terminated malachite green derivative: vesicle formation and photoinduced disassembly

This paper describes the assembly and disassembly of vesicles formed by a UV-responsive poly(ethylene glycol) terminated malachite green derivative. The UV-responsive amphiphile with both a hydrophobic malachite green group and a hydrophilic PEG group can self-organize into vesicles in water before UV irradiation. However, upon UV irradiation, the photochromic moiety can be ionized to its corresponding cation, leading to the disassembly of these vesicles. In addition, the cation can thermally recover its electrically neutral form, and the disassembled species can form vesicles reversibly on the basis of a thermal reverse reaction. The reverse reaction is temperature-controlled and can be speeded up by thermal treatment. By using various characterization techniques, e.g., transmission electron microscopy, dynamic light scattering, UV-visible spectroscopy, and NMR spectroscopy, we have confirmed that the vesicle structures can be formed, disassembled, and recovered by the above-mentioned treatments. It is anticipated greatly that this line of research may provide new insights into the mechanism behind stimuli-responsive formation and rupture of molecular assemblies, facilitating the design and synthesis of new surface active molecules for the fabrication of stimuli-responsive materials with designed functions.

To adjust wetting properties of organic surface by in situ photoreaction of aromatic azide

This article describes development of a simple and convenient method to provide stable low-surface-energy coatings on organic surfaces, by designing and synthesizing a surface-reactive molecule 4-azido-N-dodecylbenzamide, which bears an azide group as the reactive surface anchor and an alkyl chain as the hydrophobic tail. After the hydrophobic modification, rough organic surfaces with contact angle of about 0 degrees can change their surface wetting properties from superhydrophilicity to superhydrophobicity, whose contact angles are above 152 degrees and tilt angles lower than 5 degrees. Moreover, by changing the alkyl chain to a PEO segment, a similar concept can be used to adjust the surface wetting properties from hydrophobic (contact angle approximately 130 degrees) to superhydrophilic (contact angle approximately 0 degrees).

Videomanometry reveals clinically relevant parameters of swallowing in children

OBJECTIVE

The aim of this pilot study is to demonstrate the technical and clinical feasibility of videomanometry to assess swallowing in infants and young children presenting with dysphagia.

METHODS

We performed videomanometry using a combined solid state catheter and a perfused manometric sleeve assembly in eight patients (2-28 months) presenting at a tertiary care institution with symptoms of dysphagia. Solid state sensors were positioned at the inferior margin of the valleculae and the laryngeal entrance and the upper esophageal sphincter sleeve assembly was positioned across the upper esophageal sphincter. Manometric and radiological data were digitally recorded simultaneously using a manofluoromixer. Liquid bolus swallows were recorded in each patient and different geometric parameters of deglutition were measured.

RESULTS

Placement and fixation of the catheter was well tolerated and no adverse effects occurred. The children easily swallowed test boluses as selected during clinical examination. Results indicate that pharyngeal contractility can be evaluated as well as relaxation of the upper esophageal sphincter during swallowing of wet boluses.

CONCLUSIONS

Videomanometry in young children is feasible with the limited discomfort of the placement of the catheter. It is a promising technique that will allow more accurate assessment of pediatric oropharyngeal dysphagia.