Lack of Pharmacokinetic Interaction Between Lamotrigine and Olanzapine in Healthy Volunteers

STUDY OBJECTIVE

To investigate the potential drug-drug interaction between lamotrigine, an antiepileptic agent used to treat bipolar disorders, and olanzapine, an atypical antipsychotic drug also used to treat bipolar disorders, both of which are metabolized by the uridine diphosphate glucuronosyltransferase system.

DESIGN

Prospective cohort study.

SETTING

University center for clinical research.

SUBJECTS

Fourteen nonsmoking, healthy volunteers.

INTERVENTION

Subjects received lamotrigine 25 mg/day for 5 days, then 50 mg/day for 10 days to achieve steady-state concentrations. On day 15, blood samples were obtained before and 0.5, 1, 2, 3, 4, 6, 8, 10, 12, and 24 hours after the dose. Lamotrigine 50 mg/day was then given for an additional 3 days. On the next day, lamotrigine 50 mg and olanzapine 5 mg were coadministered. Blood samples were obtained at the same times as before and at 48, 72, and 96 hours after dosing.

MEASUREMENTS AND MAIN RESULTS

Blood samples were assayed for lamotrigine and olanzapine concentrations by means of high-performance liquid chromatography. Olanzapine did not significantly affect lamotrigine disposition, as we observed no differences in the area under the concentration-time curve from 0-24 hours or in lamotrigine plasma concentrations at baseline or at 24 hours. For lamotrigine, the mean time to reach maximum concentration was significantly prolonged during olanzapine coadministration (mean +/- SD 1.9 +/- 1.3 vs 4.0 +/- 3.0 hrs, p = 0.025), possibly because of the anticholinergic properties associated with olanzapine. Mild sedation was the only adverse effect that occurred during lamotrigine and olanzapine coadministration.

CONCLUSION

Lamotrigine and olanzapine can safely be combined in healthy volunteers at the low doses studied, without a clinically significant interaction. When prescribing high doses of olanzapine and lamotrigine for bipolar disorder, patients must be carefully monitored.

Fabrication of Internally Tapered Capillaries for Capillary Electrochromatography Electrospray Ionization Mass Spectrometry

In this study, we report a novel procedure for fabricating internally tapered capillary columns suitable for the coupling of capillary electrochromatography (CEC) to electrospray mass spectrometry (ESI-MS). The internal tapers were prepared by slowly heating the capillary end in a methane/O2 flame. Due to continuous self-shrinking of the inner channel of the capillary, the inside diameter of the opening was reduced to 7-10 microm. The procedure is easy to handle, with no requirement for expensive equipment as well as elimination of problematic grinding of the tip. Several advantages of these new internal tapers, as compared to using externally tapered columns, are described. First, the problems of poor durability and tip breakage associated with external tapering were successfully overcome with the internal taper. A comparison of the online CEC/ESI-MS between external versus internal tapers showed that the latter provides enhanced electrospray stability, resulting in significantly lower short-term noise and very short-term noise values. In turn, the more rugged design of internal tapers allows performing CEC/MS utilizing a harsh polar organic mobile phase, which was not previously successful using an external taper due to higher operating current and electrospray arcing. Next, data on the reproducibility of the internally tapered CEC/MS column using warfarin and beta-blockers as model analytes are presented. For example, when comparing the reproducibility for separation of warfarin under reversed-phase conditions, the internal taper demonstrated superior intraday % RSD (1.6-3.4) as compared to the external taper intraday % RSD (5-6). Last, the applicability of performing quantitative CEC/MS with internally tapered capillaries is demonstrated for simultaneous enantioseparation of beta-blockers. Impressive quantitative results include good linearity of calibration curves (e.g., R2 = 0.9940-0.9988) and limit of detection as low as 30 nM. The sensitive detection of a minor impurity of one enantiomer at the 0.1% level in a major chiral entity buttresses the suitability of compliance with FDA guidelines.

Glycine-based polymeric surfactants with varied polar head group: I. synthesis, characterization, and application in micellar electrokinetic chromatography

The monomers and polymers of four anionic amide type sodium undecenoxy carbonyl glycinate (SUCG) surfactants and four anionic carbamate type sodium undecenoyl glycinate (SUG) surfactants with 1-, 2-, 3-, and 4-glycine unit as head group were synthesized and characterized. The CMC and aggregation number (A) for all eight surfactants were determined using fluorescence spectroscopy. In addition, the CMC values of these surfactants were also projected by surface tension and CE. The CMC of the monomers decreases with increases in the size of glycine head groups and correlates well when the fluorescence method was compared to CE. The A number increases and partial specific volume (V) decreases with increase in size of the head group of both monomers and polymers. However, A and V are always lower for the polymers than the corresponding monomers. The electrophoretic and chromatographic parameters of micelle polymers of SUG and SUCG were also examined. The coefficient of EOF increases with the increase in size of the head group but the electrophoretic mobility decreases which results in a decrease in the elution range. The retention data suggest that the selectivity differences among the mono-, di-, and tripeptide derivatives of poly-SUCG surfactants are relatively higher compared to the derivatives of poly-SUG series.

Glycine-based polymeric surfactants with varied polar head group: II. chemical selectivity in micellar electrokinetic chromatography using linear solvation energy relationships

A series of four acyl and four alkenoxy glycinates (i.e., mono-, di-, tri-, and tetraderivatives of polysodium N-undecenoyl glycinate (poly-SUGs) as well as polysodium N-undecenoxy carbonyl glycinates (poly-SUCGs)) were compared for simultaneous separation of nonhydrogen bonding (NHB), hydrogen-bond acceptor (HBA), and hydrogen-bond donor (HBD) solutes. An increase in the number of glycine units in the polar head group of polymeric surfactant decreases both the retention and the migration window of all solutes with some changes in separation selectivity. The poly(sodium N-undecenoxy carbonyl-glycinate) (poly-SUCG1) with one glycine unit was the least polar surfactant and has the lowest phase ratio, but this monoglycinate surfactant provided the best simultaneous separation of 10-NHBs and 8-HBAs. On the other hand, 9-HBDs were well separated using any of the six mono-, di-, and triglycinate surfactants compared to the two tetraglycinates. Linear solvation energy relationships (LSERs) and separation of the geometrical isomers studies were also performed to further envisage the selectivity differences. From LSER studies, the phase ratio and hydrogen-bond-donating strength of the poly-SUG series of surfactant were found to increase with an increase in the size of the head group, but no clear trends were observed for poly-SUCG surfactants. The cohesiveness for all poly-SUG and poly-SUCG was positive, but the values were generally lower (with exception of the poly(sodium N-undecenoyl glycyl-glycyl-glycinate)) at a higher number of glycine units. Finally, the poly(sodium N-undecenoyl glycinate) and poly-SUCG1 were found to be the two best polymeric surfactants as they provided relatively higher shape selectivity for separation of two of the three sets of geometrical isomers.

Polymeric alkenoxy amino acid surfactants: IV. effects of hydrophobic chain length and degree of polymerization of molecular micelles on chiral separation of beta-blockers

Four alkenoxy leucine-based surfactants with C8-C11 chains containing a terminal double bond, and one C11 chain surfactant with a terminal triple bond are synthesized and characterized in monomeric and polymeric forms. These polymeric pseudophases are then utilized to study the influence of chain length and DP for the enantioseparations of seven beta-blockers in MEKC. Variations in chain length and concentration of polymeric surfactants showed significant effects on the chiral resolution (Rs) and efficiency (N). A relatively large elution range combined with the highest polarity and aggregation number (A) but the lowest retention time, partial specific volume, and optical rotation generated with C8-polymeric surfactant results in simultaneous enantioseparation of all seven beta-blockers with higher N and R(s). In particular, highly hydrophobic beta-blockers are better resolved with shorter hydrocarbon chain even at higher surfactant concentration, which is unachievable with longer chain surfactant. On the other hand, polymer derived from C11-triple bond provided smaller A value compared to C11-double bond surfactant. However, chiral Rs of hydrophobic beta-blockers are still achievable with the C11-triple bond surfactant with enhanced N and shorter analysis time. In addition, effect of polymerization concentration is evaluated by polymerizing all five surfactants at five times their respective CMCs and 100 mM equivalent monomer concentrations. Polymerization of shorter chain (C8 and C9) double-bonded surfactants at five times their respective CMCs results in higher A values with better chiral Rs and N compared to the same two surfactants polymerized at 100 mM.

Capillary Electrochromatography−Mass Spectrometry of Zwitterionic Surfactants

This work describes the on-line hyphenation of a packed capillary electrochromatography (CEC) column with an internally tapered tip coupled to electrospray ionization-mass spectrometry (ESI-MS) and atmospheric pressure chemical ionization-mass spectrometry (APCI-MS) for the analysis of betaine-type amphoteric or zwitterionic surfactants (Zwittergent). A systematic investigation of the CEC separation and MS detection parameters comparing ESI and APCI is shown. First, a detailed and optimized manufacturing procedure for fabrication of the CEC-MS column with a reproducible internally tapered tip (7-9 microm) is presented. Next, the optimization of the separation parameters by varying the C(18) stationary-phase particle size (3 versus 1.5 microm), as well as mobile-phase composition including acetonitrile (ACN) volume fraction, ionic strength, and pH is described. The optimized separation is achieved using 3-microm C(18) packing with 75% ACN (v/v), 5 mM Tris at pH 8.0. Optimization for on-line CEC-ESI-MS detection is then done varying both the sheath liquid and spray chamber parameters while evaluating the use of random versus structured factorial table experimental designs. The more structured approach allows fundamental analysis of individual ESI-MS parameters while minimizing CEC and MS equilibration time between settings. A comparison of CEC-ESI-MS to CEC-APCI-MS using similar sheath and spray chamber conditions presents new insight for coupling of CEC to APCI-MS. The sheath liquid flow rate required to maintain adequate sensitivity is much higher in APCI source (50 microL/min) as compared to the ESI source (3 microL/min). The on-line mass spectra obtained in the full scan mode show that fragmentation in the two sources occurs at different positions on the Zwittergent molecules. For ESI-MS, the protonated molecular ion is always highest in abundance with minor fragmentation occurring due to the loss of the alkyl chain. In contrast, the APCI-MS spectra show that the highest abundant ion resulted by elimination of propane sulfonate from the Zwittergent molecule. A comparison of the sensitivity between the two sources in positive ionization SIM mode shows that CEC-ESI-MS provides an impressive limit of detection (LOD) of 5 ng/mL, which is at least 3 orders of magnitude lower than CEC-APCI-MS (LOD 100 microg/mL). Finally, the optimized CEC-MS methods comparing ESI and APCI are applied for separation and structural characterization of a real industrial zwittergent sample, Rewoteric AM CAS.

Capillary electrophoresis-mass spectrometry: recent advances to the analysis of small achiral and chiral solutes

We describe here the state-of-the-art development of on-line capillary electrophoresis-mass spectrometry (CE-MS) over the last two years. Technological developments included are novel designs of new interfaces and ionization sources, new capillary coatings, buffers, and micelles as well as application of various modes of CE-MS published in the recent literature. The areas of CE-MS application in analysis of small achiral and chiral solutes are covered in sections that highlight the recent advances and possibilities of each mode of CE-MS. Application areas reviewed in this paper include achiral and chiral pharmaceuticals, agrochemicals, carbohydrates, and small peptides. The separation of enantiomers using micellar electrokinetic chromatography (MEKC)-MS with molecular micelles and capillary electrochromatography (CEC)-MS using pack tapered columns appears to provide good tolerance to electrospray stability for routine on-line CE-MS. These two modes seem to be very suitable for sensitive detection of chiral pharmaceuticals in biological samples, but their use will probably increase in the near future. Overall, it seems that one mode of CE-MS, in particular capillary zone electrophoresis (CZE)-MS, is now recognized as established technique for analysis of small charged solutes, but other modes, such as MEKC-MS and CEC-MS, are still within a period of development in terms of both MS-compatible pseudostationary phases and columns as well as applications.

Simultaneous Enantioseparation and Tandem UV−MS Detection of Eight β-Blockers in Micellar Electrokinetic Chromatography Using a Chiral Molecular Micelle

The feasibility of using a new and more versatile polymeric chiral surfactant, i.e., poly(sodium N-undecenoxy carbonyl-L-leucinate (poly-L-SUCL) is investigated for simultaneous enantioseparation and detection of eight structurally similar beta-blockers with tandem UV and MS detection. Three optimization approaches, i.e., direct infusion-MS, capillary zone electrophoresis-MS, and chiral micellar electrokinetic chromatography-mass spectrometry (CMEKC-MS), were investigated to optimize sheath liquid parameters, spray chamber parameters, and CMEKC separation parameters for maximum sensitivity and chiral resolution. Compared to unpolymerized micelle of L-SUCL, the use of micelle polymer (i.e., poly-L-SUCL) provided significantly higher separation efficiency, lower separation current, and higher detection sensitivity for CMEKC-ESI-MS of beta-blockers. It was also observed that, unlike monomeric L-SUCL, polymeric L-SUCL provided enantioseparation of all beta-blockers even at the lowest surfactant concentration (i.e., 5 mM poly-L-SUCL). Under optimum CMEKC and ESI-MS conditions (15 mM poly-L-SUCL, 25 mM each of NH4OAc and TEA (pH 8.0); 80% (v/v) methanol sheath liquid containing 40 mM NH4OAc (pH 8.0); sheath liquid flow rate, 5.0 microL/min; drying gas flow rate, 5 L/min; drying gas temperature, 200 degrees C; nebulizing pressure, 6 psi (0.414 bar); capillary voltage, +2.5 kV; fragmentor voltage, 85 V), baseline enantioseparation of eight beta-blockers was achieved by tandem UV (in approximately 30 min) and MS (in approximately 60 min) detection. Calibration curves for all beta-blockers were linear in the range of 0.01-0.6 mM for both CMEKC-UV and CMEKC-MS methods, but the later method provided better concentration limit of detection with similar RSD for migration time and peak areas. The CMEKC-ESI-MS method appears suitable for use as a routine procedure for high-throughput separation of beta-blockers with high sensitivity.

Development of capillary zone electrophoresis-electrospray ionization-mass spectrometry for the determination of lamotrigine in human plasma

A method of coupling capillary zone electrophoresis (CZE) with electrospray ionization-mass spectrometry (ESI-MS) detection has been developed for monitoring an antiepileptic drug, lamotrigine (LTG) in human plasma. The CZE-MS was developed in three stages: (i) CZE separation and ESI-MS detection of LTG and tyramine (TRM, internal standard) were simultaneously optimized by studying the influence of CZE background electrolyte (BGE) pH, BGE ionic strength, and nebulizer pressure of the MS sprayer; (ii) sheath liquid parameters, such as pH, ionic strength, organic modifier content, and flow rate of the sheath liquid, were systematically varied under optimum CZE-MS conditions developed in the first stage; (iii) MS sprayer chamber parameters (drying gas temperature and drying gas flow rate) were varied for the best MS detection of LTG. The developed assay was finally applied for the determination of LTG in plasma samples. The linear range of LTG in plasma sample assay was between 0.1-5.0 microg/mL with a limit of detection as low as 0.05 microg/mL and run time less than 6 min. Finally, the concentration-time profile of LTG in human plasma sample was found to correlate well when CZE-ESI-MS was compared to a more established method of high-performance liquid chromatography with ultraviolet detection.

Chiral separations in microemulsion electrokinetic chromatography

In this study, microemulsions of the chiral surfactant polysodium N-undecenoyl-D-valinate (poly-D-SUV) was utilized for enantiomeric separation by investigating two approaches using polymeric chiral surfactant in microemulsion electrokinetic chromatography (MEEKC). In the first approach, poly-D-SUV was used as an emulsifier surfactant along with 1-butanol and n-heptane. Enantioseparation of anionic or partially anionic binaphthyl derivatives, anionic barbiturates, and cationic paveroline derivatives were achieved by varying the mass fraction of 1-butanol, n-heptane and poly-D-SUV. For anionic or partially anionic analytes, relatively lower mass fractions of n-heptane, and poly-D-SUV were found to give optimum chiral separations as compared to that for cationic solutes. In the second approach, the chiral microemulsion polymer was prepared by polymerizing mixtures of 3.50% (w/w) of sodium N-undecenoyl-D-valinate (D-SUV) and 0.82% (w/w) of n-heptane (core phase) at varying concentration of 1-butanol. After polymerization, the n-heptane and 1-butanol were removed to yield solvent free microemulsion polymers (MPs) which were then utilized for the separation of anionic binaphthyl derivatives and anionic barbiturates. When MPs of D-SUV were utilized for chiral separation, 1.00% (w/w) 1-butanol and 3.50% (w/w) 1-butanol was optimum for enantioseparation of (+/-)-BNP and (+/-)-BOH, respectively. On the other hand, for anionic (+/-)-barbiturates very low concentration of butanol (0.25%, w/w) provided optimum resolution. Compared with micellar electrokinetic chromatography (MEKC), the use of micelle polymers or microemulsion polymers in MEEKC showed dramatic enhancement for resolution of (+/-)-BNP, while this enhancement was less dramatic for other binaphthyls [(+/-)-BOH, (+/-)-BNA] as well as for (+/-)-barbiturates and (+/-)-paveroline derivatives. However, higher separation efficiency of the enantiomers was always observed with MEEKC than in MEKC.

Combination of chiral capillary electrochromatography with electrospray ionization mass spectrometry: method development and assay of warfarin enantiomers in human plasma

The hyphenation of chiral capillary electrochromatography (CEC) with electrospray ionization mass spectrometry (ESI-MS) is very challenging but promising due to the fact that it combines sensitivity with high specificity and selectivity. In this work, CEC capillaries packed with (3R,4S)-Whelk-O1 chiral stationary phase were used for simultaneous enantioseparation of (+/-)-warfarin and its internal standard, (+/-)-coumachlor. Furthermore, both the chiral CEC separation and MS detection parameters were examined in detail. First, the influence of different column fabrication was investigated. Second, enantioseparation was optimized by varying CEC parameters, including acetonitrile concentration, buffer pH, and ionic strength. Under the optimum chiral CEC conditions, ESI-MS parameters such as sheath liquid pH and composition, sheath liquid flow rate, drying gas flow rate, drying gas temperature, nebulizer pressure, and fragmentor voltage were investigated to achieve maximum MS signals of the separated enantiomers. Finally, using solid-phase extraction as sample preparation method, (+/-)-warfarin spiked in 100-microL human plasma samples were analyzed. The calibration curves showed good linearity for both (R)-warfarin (R = 0.9979) and (S)-warfarin (R = 0.9978) enantiomers. The experimental limit of detection was approximately 25 ng/mL for both enantiomers. Even though the data are still preliminary, we can state with confidence that chiral CEC-ESI-MS has the potential to establish itself as a very powerful technique for the determination of enantiomeric ratios in human body fluid.

Polymeric alkenoxy amino acid surfactants: II. Chiral separations ofβ-blockers with multiple stereogenic centers

Two amino acid-based (leucine and isoleucine) alkenoxy micelle polymers were employed in this study for the separation of multichiral center-bearing beta-blockers, nadolol and labetalol. These polymers include polysodium N-undecenoxy carbonyl-L-leucinate (poly-L-SUCL) and polysodium N-undecenoxy carbonyl-L-isoleucinate (poly-L-SUCIL). Detailed synthesis and characterization were reported in our previous paper [26]. It was found that poly-L-SUCIL gives better chiral separation than poly-L-SUCL for both nadolol and labetalol isomers. The use of 50-100 mM poly-L-SUCIL as a single chiral selector provided separation of four and three isomers of labetalol and nadolol, respectively. Further optimization in separation of both enantiomeric pairs of nadolol and labetalol was achieved by evaluation of type and concentration of organic solvents, capillary temperature as well type and concentration of cyclodextrins. A synergistic approach, using a combination of poly-L-SUCIL and sulfated beta-CD (S-beta-CD) was evaluated and it showed dramatic separation for enantiomeric pairs of nadolol. On the other hand for labetalol enantiomers, separation was slightly decreased or remain unaffected using the dual chiral selector system. Finally, simultaneous separation of both nadolol and labetalol enantiomers was achieved in a single run using 25 mM poly-L-SUCIL and 5% w/v of S-beta-CD in less then 35 min highlighting the importance of high-throughput chiral analysis.

Polymeric alkenoxy amino acid surfactants: III. Chiral separations of binaphthyl derivatives

Micellar electrokinetic chromatography (MEKC) was investigated for the enantiomeric separations of three binaphthyl derivatives ((+/-)-1,1'-bi-(2-naphthol) (BOH), (+/-)-1,1'-binaphthyl-2,2'-diyl hydrogenphosphate (BNP), and (+/-)-1,1'-binaphthyl-2,2'-diamine (BNA)) using two recently synthesized chiral polymeric surfactants (polysodium N-undecenoxy carbonyl-L-leucinate (poly-L-SUCL) and polysodium N-undecenoxy carbonyl-L-isoleucinate (poly-L-SUCIL)) in our laboratory. Enantiomeric separation (resolution and selectivity) of the binaphthyl derivatives was influenced by polymerization concentration of the monomeric surfactant, pH, type and concentration of the background electrolyte (BGE) as well as concentration of the polymeric surfactant. Two BGEs (dibasic phosphate and Tris-borate) were compared for this study. The use of dibasic phosphate as BGE in poly-L-SUCL provides baseline resolution of (+/-) BOH and (+/-) BNP, however, no resolution and selectivity at all was observed for (+/-) BNA. A similar approach was adopted with Tris-borate-poly-L-SUCL system at fixed pH 10.1, which resulted in baseline resolution of all three binaphthyl derivatives. Although R(s) of binaphthyl derivatives was always higher and electroosmotic flow (EOF) was always lower using Tris-borate than with dibasic phosphate, the selectivity values for the two buffer systems did not differ significantly. In addition, it was found that poly-L-SUCL provided better enantiomeric resolution and selectivity for (+/-) BOH and (+/-) BNA, while poly-L-SUCIL provided enhanced enantiomeric resolution but similar enantioselectivity for (+/-) BNP. This indicates that the depth of analyte penetration into the palisade layer and the micellar core are responsible for chiral recognition of hydrophobic analyte (e.g., (+/-) BOH, and (+/-) BNA) whereas for moderately hydrophobic analyte (e.g., (+/-) BNP) interaction with the polar head group seems to dictate chiral recognition. Simultaneous enantioresolution of all three binaphthyl derivatives was possible in a single electrophoretic run using either poly-L-SUCL or poly-L-SUCIL. Further comparison of the two polymeric surfactants showed that poly-L-SUCL provided slightly longer analysis time than poly-L-SUCIL but the use of the former polymeric surfactant should be preferred due to its ability to provide complete baseline resolution and higher selectivity of all the three atropisomers with a wider chiral window.

Capillary electrochromatography of Triton X-100

Nonionic surfactants such as Triton X-100 (TX-100) are comprised of a mixture of oligomers with a varying degree of length in the ethoxylate chain. The development of chromatographic methods for resolution of the various oligomers of TX-100 is of environmental importance, and can be useful for quality control and characterization in industrial manufacture. Capillary electrochromatography (CEC) is fast becoming a capable separation technique that combines the benefits of both high-performance liquid chromatography (HPLC) and capillary electrophoresis (CE). This report presents a novel CEC method for separation of the various TX-100 oligomers. A comparison of monomeric vs. polymeric stationary phases for separation of TX-100 was conducted. Since the oligomers of TX-100 were better resolved on a monomeric phase as compared to polymeric phase, a systematic mobile phase tuning was performed utilizing a monomeric CEC-C18-3 microm-100 A stationary phase. Various mobile phase parameters such as acetonitrile (ACN) content, Tris concentration, pH, voltage, and temperature were manipulated in order to achieve the optimum separation of oligomers in less than 30 min.

Polymeric sulfated surfactants with varied hydrocarbon tail: II. Chemical selectivity in micellar electrokinetic chromatography using linear solvation energy relationships study

The effect of hydrocarbon chain length on chemical selectivity in micellar electrokinetic chromatography (MEKC) was investigated using polymeric sulfated surfactants: poly-(sodium 7-octenyl sulfate), poly(sodium 8-nonenyl sulfate), poly(sodium 9-decenyl sulfate), and poly(sodium 10-undecenyl sulfate). Linear solvation energy relationships (LSERs) and free energy of transfer studies were conducted to predict the selectivity differences between the four polymeric surfactants. The overall nature of the solute/ polymeric micelle interactions was found to be different despite the fact that all polymeric surfactants have the same head group. The polar character and acidic strength of the polymeric surfactant are found to decrease as the hydrocarbon chain length of the surfactant is increased. On the other hand, the polarizability of the polymeric sulfated surfactants increases (upon interacting with solute lone-pair electrons) with increasing hydrocarbon chain length. The LSER results show that the solute size and hydrogen bond accepting ability play the key roles in MEKC retention.

Combination of cyclodextrins and polymeric surfactants for chiral separations

A cyclodextrin-modified micellar electrokinetic chromatography (CD-MEKC) method was applied to the enantioseparation of three binaphthyl derivatives using neutral CDs (i.e., beta- and gamma-CD) in combination with various chiral amino acid-based polymeric surfactants (PSs). Both the D- and L-configurations of poly(sodium N-undecanoyl alaninate), poly(sodium N-undecanoyl leucinate), and poly(sodium N-undecanoyl valinate) (poly(L-SUV)) were synthesized. The retention behavior of the three binaphthyl derivatives under optimum electrophoretic conditions using a single chiral additive (PS or CD) is discussed. In addition, the effect of CD cavity size and stereochemical configuration of polymeric surfactants on selectivity (alpha) and resolution (Rs) was investigated. The enantioseparation of (+/-)1,1'-binaphthyl-2,2'-diamine gave a reversal of enantiomeric order when using beta-CD in combination with any of the three D-configuration PS. However, better enantioseparation is obtained when using the corresponding L-configuration PS with beta-CD. A reversal of migration order (RMO) for the enantiomers of (+/-)1,1'-bi-2-naphthol was observed upon the addition of 10 mM gamma-CD to poly(L-SUV). However, no RMO of (+/-)1,1'-bi-2-naphthol was seen when either beta-CD or gamma-CD was combined with D-PS. The enantiomers of (+/-)1,1'-binaphthyl-2,2'-diyl hydrogen phosphate showed little enantioselective behavior toward the PS alone. However, combined D- or L-PS and beta-CD or gamma-CD systems gave increased Rs and alpha values. The chiral recognition of binaphthyl derivatives observed resulting from the various combinations of two chiral selectors is discussed.

Polymeric sulfated surfactants with varied hydrocarbon tail: I. Synthesis, characterization, and application in micellar electrokinetic chromatography

The influence of surfactant hydrocarbon tail on the solute/pseudostationary phase interactions was examined. Four anionic sulfated surfactants with 8-, 9-, 10-, and 11-carbon chains having a polymerizable double bond at the end of the hydrocarbon chain were synthesized and characterized before and after polymerization. The critical micelle concentration (CMC), polarity, and aggregation number of the four sodium alkenyl sulfate (SAIS) surfactants were determined using fluorescence spectroscopy. The partial specific volume of the polymeric SAIS (poly-SAIS) surfactants was estimated by density measurements and capillary electrophoresis (CE) was employed for determination of methylene selectivity as well as for elution window. The CMC of the monomers of SAIS surfactants decrease with increase in chain length and correlated well when fluorescence method was compared to CE. The physicochemical properties (partial specific volume, methylene selectivity, electrophoretic mobility, and elution window) increased with an increase in chain length. However, no direct relationship was found between the aggregation number and the length of hydrophobic tail of poly-SAIS surfactants. These polymeric surfactants were then used as pseudostationary phases in micellar electrokinetic chromatography (MEKC) to study the retention behavior and selectivity factor of 36 benzene derivatives with different chemical characteristics. Although variation in chain length of the polymeric surfactants significantly affects the retention of nonhydrogen bonding (NHB) benzene derivatives, these effects were less pronounced for hydrogen bond acceptor (HBA) and hydrogen bond donor (HBD) benzene derivatives. Therefore, hydrophobicity of poly-SAIS surfactants was found to be a major driving force for retention of NHB derivatives. However, for several benzene derivatives (NHB, HBA, and HBD) significantly higher selectivity factor was observed with longest chain polymeric surfactant (e.g., poly(sodium 10-undecenyl sulfate), poly-SUS) compared to shorter chain polymeric surfactant (e.g., poly(sodium 7-octenyl sulfate), poly-SOcS). In addition, the effect of the surfactant hydrophobic chain was also found to have some impact on migration order of NHB, HBA, and HBD benzene derivatives.

Capillary electrochromatography of methylated benzo[a]pyrene isomers. II. Effect of stationary phase tuning

For Part II of our ongoing study, we present a strategy for stationary phase optimization for the capillary electrochromatographic (CEC) separation of the 12 methylated benzo[a]pyrene (MBAP) isomers. Utilizing the optimum mobile phase conditions from Part I of our study as a guide, seven commercially available stationary phases have been evaluated for their ability to separate highly hydrophobic MBAP isomers. Ranging in design from high-performance liquid chromatography (HPLC) to CEC application, each phase was slurry packed in house and tested for CEC suitability and performance. Several stationary phase parameters were investigated for their effects on MBAP separation including bonding type (monomeric or polymeric, % carbon loading, surface coverage), pore size, particle size, and type of alkyl substituent. In this manner, the present state of commercially available packings has been assessed in our laboratory. Utilizing the optimum polymeric C18-5 microm-100 A-PAH stationary phase, the effects of CEC packed bed length and capillary inside diameter (I.D.) were also evaluated. A 50 microm I.D. capillary, 25 cm packed bed length and 75% (v/v) acetonitrile, 12.5 mM Tris, pH 8.0, 20 degrees C at 30 kV, provided resolution of 11 out of 12 MBAP isomers thus showing the effectiveness of CEC for analysis of structurally similar methylated polyaromatic hydrocarbons.

Capillary electrochromatography of methylated benzo[a]pyrene isomers. I. Effect of mobile phase tuning

It is of increasing importance that chromatographic methods be developed for the separation and identification of biological and environmentally harmful compounds such as methylated polycyclic aromatic hydrocarbons (PAH). Capillary electrochromatography (CEC) is fast becoming a useful technique for analysis of PAH, as it offers both high efficiency and superior resolution. The separation of 12 methylated benzo[a]pyrene (MBAP) isomers is a challenge due to the extreme hydrophobicity and structural similarity of these compounds. In this work, we present Part I of our ongoing study, a method for the systematic mobile phase tuning for CEC separation of the 12 MBAP isomers. The CEC experiments were conducted utilizing a CEC-octadecylsilica (ODS) stationary phase and fused-silica capillary [(75 microm I.D., 363 microm O.D.) 36.5 cm total length, 25.0 cm effective length] which was slurry pressure packed in our laboratory. Several mobile phase parameters were manipulated to provide optimum separation. These included acetonitrile (ACN) concentration, tris(hydroxymethyl) aminomethane (Tris) concentration, pH, and addition of a tertiary buffer constituent such as tetrahydrofuran (THF) and isopropanol (IPA) to ACN-aqueous buffer mixtures. Optimum CEC separation conditions were achieved using 75% (v/v) ACN-25% (v/v) 12.5 mM Tris, pH 8.0, and 30 kV at 25 degrees C. These mobile phase conditions were then utilized for Part II of our study, the CEC stationary phase optimization for the separation of 12 MBAP isomers.

Polymeric alkenoxy amino acid surfactants: I. Highly selective class of molecular micelles for chiral separation of beta-blockers

Two amino acid-based alkenoxy micelle polymers were synthesized for this study. These include polysodium N-undecenoxy carbonyl-L-leucinate (poly-L-SUCL) and polysodium N-undecenoxy carbonyl-L-isoleucinate (poly-L-SUCIL). The polymerization time and concentration of the synthesized micelle polymers were optimized by (1)H-nuclear magnetic resonance (NMR) and capillary electrophoresis (CE) experiments. Detailed physicochemical properties ((1)H NMR, critical micelle concentration (CMC), optical rotation, partial specific volume, aggregation number, and polarity) were determined, and these molecular micelles were introduced as a pseudostationary phase in micellar electrokinetic chromatography to study the molecular recognition and to develop a method for simultaneous separation of eight chiral beta-blockers. It is found that poly-L-SUCL gives overall better chiral resolution and wider chiral window than poly-L-SUCIL. After optimizing the type of micelle polymer, injection size and temperature, simultaneous separation and enantioseparation of eight beta-blockers were achieved in less than 35 min. A comparison with the amide-type surfactants of the same polar head group and alkyl chain length showed that carbamate-type surfactants always work better than the corresponding amide-type surfactant.

Brush-type chiral stationary phase for enantioseparation of acidic compounds. Optimization of chiral capillary electrochromatographic parameters

The capillary electrochromatographic separations of three acidic enantiomers (carprofen, coumachlor and warfarin) were studied on a capillary column packed with 5 microm (3R,4S)-Whelk-O 1 chiral stationary phase. The influence of several experimental parameters (mobile phase pH, type of background electrolyte, acetonitrile ratio, temperature, applied voltage and ionic strength) on electroosmotic flow velocity, retention factor, selectivity factor, efficiency, resolution and effectiveness of chiral separation was evaluated. It was notable that the optimum resolution of the acidic enantiomers was achieved at pH 3.0 phosphate buffer, suggesting that capillary electrochromatography in the ion-suppressed mode can be applied for chiral separations of a range of acidic compounds.

Polysodium N-undecanoyl-L-leucylvalinate: a versatile chiral selector for micellar electrokinetic chromatography

Dipeptide micelle polymers are a new class of polymeric surfactants of which the polysodium undecanoyl-L-leucylvalinate (poly-L-SULV) was found to be a broadly applicable chiral selector for micellar electrokinetic chromatography. This negatively charged dipeptide micelle polymer is a high molecular weight compound with large countercurrent mobility, zero critical micelle concentration, low aggregation number, and high solubility in water or water-organic solvents. In an extensive chiral screening program, enantioseparation of 75 racemic compounds was tested with poly-L-SULV as chiral pseudostationary phase in neutral pH and basic pH background electrolytes. A total of 58 out of 75 racemic compounds could be resolved after choosing an appropriate concentration of poly-L-SULV. Although anionic chiral analytes are difficult to resolve using poly-L-SULV, the percent success rate for chiral resolution of cationic (77%) and neutral (85%) racemates was very high. Aspects regarding electrostatic, steric, hydrophobic, and hydrogen-bonding interactions of this dipeptide micelle polymer with various classes of chiral analytes are discussed.

Chiral capillary electrophoresis-mass spectrometry: modes and applications

A review is presented to highlight several approaches for coupling capillary electrophoresis (CE) and electrospray ionization-mass spectrometry (ESI-MS) for analysis of chiral compounds. A short discussion of commercially available CE-MS instruments and interface design is followed by a detail review on various modes of chiral CE-MS. In general, for each CE-MS mode, the capabilities, applications and limitations for chiral analysis have been pointed out. The first mode, chiral capillary zone electrophoresis-mass spectrometry (CZE-MS) in which neutral derivatized cyclodextrins (CDs) are used is possible using either column coupling with voltage switching or a partial-filling technique (PFT). However, some applications of direct coupling of CZE-MS mode are also reported. The second mode is a chiral electrokinetic chromatography-mass spectrometry (EKC-MS) in which a charged chiral selector such as a sulfated beta-CD or a vancomycin could be conveniently employed. This is because these chiral selectors have a significantly higher countercurrent electrophoretic mobility which prevents the entrance of these selectors into the mass spectrometer. The combination of counter-migration and PFT demonstrates that this synergism could be successfully applied to chiral analysis of a broader range of compounds. It is well-known that the on-line coupling of micellar electrokinetic chromatography to mass spectrometry (MEKC-MS) is problematic because the high surface activity and nonvolatile nature of conventional surfactant molecules lower the electrospray ionization efficiency. However, a recent report demonstrates that this hyphenation is now possible with the use of molecular micelles. Various MEKC-ESI-MS parameters that can be used to optimize both chiral resolution and ESI response are discussed. Finally, two recent examples that demonstrate the feasibility of using either open-tubular or packed chiral CEC with MS are reviewed. This survey will attempt to cover the state-of-the-art on various modes of CE-MS from 1998 up to 2002.

Chiral separation of anionic and neutral compounds using a hepta-substituted cationic beta-cyclodextrin as a chiral selector in capillary electrophoresis

Enantiomeric separations of six anionic and two neutral racemates were achieved using a fully substituted heptakis(6-hydroxyethylamino-6-deoxy)-beta-cyclodextrin (beta-CD-EA) as a chiral selector. As beta-CD-EA provides a dynamic coating on the capillary wall, reverse-polarity capillary electrophoresis (CE) configuration is applied for separations of anionic and neutral chiral compounds. Chiral separations of various classes of anionic and neutral enantiomers were found to be highly dependent on pH because the degree of protonation of beta-CD-EA can alter the shape of the CD cavity by charge repulsion, altering complexation, aiding selectivity, and leading to better enantiomeric separation. In general, the chiral resolution of anionic enantiomers was enhanced at higher pH. This suggests that carboxylate or phosphate groups on the analyte may interact with the protonated amine groups of cationic CD. The successful enantioseparation was achieved in a pH range of 6.6-7.8 for all six anionic analytes, in the presence of 10 mM beta-CD-EA.