Factors affecting the use of anti-amoebiasis protective measures among Taiwan immigrants returning to amoebiasis-endemic regions

OBJECTIVE

To investigate the predictors of use of anti-amoebiasis protective measures (AAPMs) among Taiwan immigrants returning to their country of origin, using the Health Belief Model (HBM) to guide the investigation.

DESIGN

Cross-sectional study.

METHODS

Between March and May 2011, all permanent immigrants originating from amoebiasis-endemic countries who received services at the immigrant service centres in Taipei or Tainan and who reported that they had returned to their country of origin within the past five years were enrolled in the study. A structured questionnaire containing questions on sociodemographic characteristics and items related to the constructs of the HBM was used as the data collection instrument.

RESULTS

Complete information was collected from 384 immigrants, with a response rate of 80% (384/480). The mean age of the subjects was 38.4 years (standard deviation 10.6 years). The majority (70%) of participants did not receive travel information through a pretravel consultation, and more than 17% reported that they did not use measures to prevent amoebiasis. Multiple regression analyses revealed that Chinese proficiency, pretravel consultation and lower barriers to using protective measures were significantly associated with the use of AAPMs during return trips to country of origin (R(2) = 0.45; F = 77.5; P < 0.001).

CONCLUSION

The HBM significantly predicted the use of AAPMs in this study. A high proportion of immigrants did not use appropriate AAPMs when they returned to their country of origin. Educational approaches should be targeted at immigrants originating from amoebiasis-endemic regions who return to their country of origin.

Interface control of semiconducting metal oxide layers for efficient and stable inverted polymer solar cells with open-circuit voltages over 1.0 volt

Inverted polymer solar cells (PSCs) with high open-circuit voltages of 1.00-1.06 V are fabricated by using an indenofluorene-containing copolymer (PIFTBT8) as an electron donor material and [6,6]-phenyl-C71-butyric acid methyl ester (PC71BM) as an electron acceptor material. To improve the photovoltaic performance, interface control of various low-temperature processed ZnO films as cathode buffer layers is systematically investigated for effective electron transportation, while transition metal oxides including MoO3, WO3, NiO, and Cu2O are employed as anode buffer layers for hole-extraction. Incorporation of optimized semiconducting metal oxide interlayers can minimize interfacial power losses, which thus affords large open-circuit voltages (Voc), increased short-circuit current densities (Jsc), and fill factors (FF), eventually contributing to higher power conversion efficiencies (PCEs) as well as better device stability. Due to the improved interfacial contacts and fine-matching energy levels, inverted PSCs with a device configuration of ITO/ZnO/PIFTBT8:PC71BM/MoO3/Ag exhibit a high PCE of 5.05% with a large Voc of 1.04 V, a Jsc of 9.74 mA cm(-2), and an FF of 50.1%. For the single junction inverted PSCs with efficiencies over 5.0%, 1.04 V is the largest Voc ever achieved. By controlling the processing conditions of the active layer, the Voc can further be improved to 1.05 and 1.06 V, with PCEs of 4.70% and 4.18%, respectively. More importantly, the inverted PSCs are ascertained to maintain a PCE of 4.55% (>90% of its initial efficiency) and a Voc of 1.05 V over 180 days, demonstrating good long-term stability, which is much better than that of the conventional devices. The results suggest that the interface engineering of metal oxide interlayers is an important strategy to develop PSCs with good performance.

Low Band Gap Polymers Incorporating a Dicarboxylic Imide-Derived Acceptor Moiety for Efficient Polymer Solar Cells

Two novel copolymers incorporating N-alkyl-4,7-di(thien-2-yl)-2,1,3-benzothiadiazole-5,6-dicarboxylic imide (DI) and benzo[1,2-b:4,5-b']dithiophene (BDT) units have been designed, synthesized, and characterized. By the incorporation of the DI unit, both polymers show a bathochromically shifted absorption with a deep lying highest occupied molecular orbital (HOMO) energy level. The polymer based on thienyl group substituted BDT exhibits an intense absorption in the longer-wavelength region, a deeper lying HOMO energy level, and a higher carrier mobility, all of which contribute to the resulting polymer solar cells with a higher power conversion efficiency (PCE) of 5.19% and an increased V_oc of 0.91 V.

Distant metastasis in triple-negative breast cancer

Triple-negative breast cancer (TNBC) relapses more frequently than hormone receptor-positive subtypes and is often associated with poor outcomes. This retrospective study reviewed the pattern of distant metastasis with regard to survival in patients with TNBC. A total of 205 TNBC patients were analyzed. TNBC patients with lung metastases had the longest median post-metastatic OS (with 95% confidence interval) of 16.6 (10.3-22.9) months, followed by the bone, 16.3 (11.7-20.8) months, the liver, 8.9 (3.5-14.4) months, the pleura, 7.5 (2.8-12.3) months, and the brain, 4.3 (0.6-8.0) months. Kaplan-Meier plots indicated that TNBC patients with metastatic spread to brain, liver, and pleural had poorer post-metastatic OS rate than patients with lung metastases (p = 0.001, 0.004, and 0.029, respectively). Moreover, brain and liver metastases correlated significantly with poorer post-metastatic OS as compared to bone metastasis (p = 0.004 and 0.011, respectively). Route of first metastasis correlated significantly with survival of TNBC patients with brain metastases being the poorest survival indicator, followed by metastases to liver, pleura, bone, and lung.

Electrical and optical properties of NiO composite films by radio frequency magnetron sputtering

The 100-nm NiO-Ag composite films with Ag content of 0 to 24.4 at.% are deposited on glass substrates. It is found that an ultra high electric resistivity (rho) value is obtained and cannot be detected by four point probe measurement when the Ag content is less than 3.4 at.%. The rho value is reduced significantly to 29.0 Omega-cm as Ag content is increased to 4.2 at.%, and it decreases greatly to 0.009 Omega-cm as the content of Ag is further increased to 24.4 at.%. The NiO-Ag composite film with Ag content of 4.2 at.% shows p-type conduction. However, it becomes n-type when the Ag content increases to 9.3 at.%, which results from the Ag atoms segregated at grain boundary of NiO when the excess Ag atoms are added into NiO films. On the other hand, the transmittance of the NiO-Ag films drops continuously from 96.3% to 31.6% as the Ag content increases from 0 to 24.4%.

Effect of Ag underlayer on microstructures and perpendicular magnetic properties of CoPt nanocomposite thin films

CoPt/Ag films were prepared by magnetron sputtering on glass substrates and subsequent annealing. The dependence of degree of ordering and magnetic properties on Ag film thickness and annealing conditions were investigated. It was found that the Ag underlayer played a dominant role in inducing the (001) texture of the CoPt film after annealing. CoPt films with a thickness about 20 nm and Ag underlayers with a thickness about 70 nm are easy to obtain a large degree of ordering and a perpendicular magnetic anisotropy after annealing at 700 degrees C for 30 min. CoPt/Ag films with out-of-plane coercivity (Hc (perpendicular)) in the range of 13.5-14.0 kOe and a out-of-plane squareness (S(perpendicular)) of 0.97 were obtained after annealing at 700 degrees C for 30 min. Ag underlayer is beneficial to enhance the Hc(perpendicular)and S(perpendicular) of CoPt film significantly. The degree of ordering and perpendicular magnetic properties of the CoPt films which deposited on Ag underlayer are larger than those of the single layer CoPt films.

Crystallization mechanisms of phase change (GeSbSn)(100-x)Co(x) optical recording films

In this study, the (GeSbSn)(100-x0Co(x) films (x = 0-13.3) were deposited on natural oxidized silicon wafer and glass substrate by dc magnetron co-sputtering of GeSbSn and Co targets. The ZnS-SiO2 films were used as protective layers. The thicknesses of the (GeSbSn)(100-x)Co(x) films and protective layer were 100 nm and 30 nm, respectively. We investigated the effects of Co addition on the thermal property, crystallization kinetics, and crystallization mechanism of the GeSbSn recording film. The crystallization temperatures of (GeSbSn)(100-x)Co(x) films were decreased with Co content. It was found that the activation energy of the (GeSbSn)(100-x)Co(x) films will decrease from 1.53 eV to 0.55 eV as Co content increased from 0 at.% to 13.3 at.%.

Microstructure and crystallization kinetics analysis of the (In15Sb85)(100-x)Zn(x) phase change recording thin films

The (In15Sb85)(100-x)Zn(x) films (x = 0 - 17.4) were deposited on nature oxidized Si wafer and glass substrate at room temperature by magnetron co-sputtering of Sb target and InZn composite target. The thermal property of the films was examined by a homemade reflectivity thermal analyzer. Microstructures of the films were analyzed by transmission electron microscope (TEM). We examined the effects of Zn addition on the thermal property, crystallization kinetics, and crystallization mechanism of the In15Sb85 recording film. As x = 0 - 17.4, thermal analysis shows that the (In15Sb85)(100-x)Zn(x) films have two phase transition temperature ranges which are 189 degrees C-215 degrees C and 300 degrees C-350 degrees C. It is found that the activation energy is increased with Zn content. This indicates that the thermal stability of amorphous state is improved by doping Zn. The optical contrasts of the films are all larger than 15%, as x = 0 - 6.2, indicating that the films have the potential in blue laser optical recording media application.

Differential gene expression between the porcine morula and blastocyst

The survival and development of pre-implantation embryos are determinant factors affecting the outcome of animal reproduction. It is essential to transfer the expression of the genetic material from maternal sources, that is the ovum to the zygote before implantation to ensure successful development. Differentiation and transformation of blastomeres initiated during the morula and blastocyst stages is an important step of the embryonic development prior to implantation. We collected morula and early blastocyst samples from pure-bred Landrace pigs in vivo to study the differential gene expression patterns at these two stages. Total RNA was extracted from individual embryos and two rounds of amplification were employed. Two micrograms of antisense RNA, targets, were prepared and hybridized with each of four custom made oligo microarrays representing 24,000 porcine genes. The analyses of replicate hybridizations showed that among the 24,000 genes, 162 genes were expressed fivefold or greater in the morula compared to early blastocysts and 2126 genes were expressed fivefold or greater in early blastocysts compared to the morula. Of these differentially expressed genes, 1429 genes were functionally annotated with related human Gene Ontology terms. In addition to basic metabolic processes, genes related to signal transduction, transportation and cell differentiation were found in both stages and were up-regulated as embryo development proceeded. Real time polymerase chain reaction was utilized to quantify 12 genes differentially expressed in the 2 embryonic stages and validated the reliability of major evidences shown in microarrays. In conclusion, we have obtained a preliminary landscape of genes differentially expressed during the transition from morula to early blastocysts in pigs and showed a generally increased transcriptional activity, perhaps in preparation for implantation. Our results provide an opportunity to study the functions of these genes in relation to the development and survival of pre-implantation porcine embryos.

Routine drainage is not necessary after laparoscopic gastric bypass

INTRODUCTION

Routine intra-abdominal drainage has been recommended for detecting surgical complications, such as anastomotic leaks or intra-abdominal hemorrhage, after laparoscopic gastric bypass for morbid obesity. The aim of this study was to determine whether routine drainage after laparoscopic gastric bypass is indeed necessary.

METHODS

Patients undergoing laparoscopic gastric bypass with intra-abdominal drainage (D-group) were compared with those without drainage (N-group) in a retrospective study. The main outcome measures were postoperative course and complications.

RESULTS

No differences were observed in the postoperative complications. Both groups had one major complication of leakage (1/90, 1.1%). Minor complications occurred in six D-group patients (6/90, 6.7%) and eight N-group patients (8/90, 8.9%) (P=0.578). No difference was observed in postoperative analgesic dose usage (mean ± SD: 63 ± 37 mg vs 60 ± 31 mg; P=0.963) or length of stay hospital (5.2 ± 2.6 d vs 4.7 ± 1.8 d; P=0.135). However, the N-group had a shorter time to flatus passage compared to the D-group (1.6 ± 0.7 d vs 1.2 ± 0.5 d; P=0.006).

CONCLUSION

Routine abdominal drainage is not necessary after a successful laparoscopic gastric bypass for morbidly obese patients. Drainage omission may contribute to a quicker recovery without additional surgical complications.

The effect of thickness on the texture and magnetic properties of single-layered FePt films by rapid thermal annealing

The single-layered FePt films with thickness in the range of 5 to 50 nm are deposited directly on Si(100) substrate without underlayer, then post annealed at 700 degrees C by rapid thermal annealing (RTA) technique. As the film thickness of FePt is over 20 nm, the L1(0) FePt(111) preferred orientation is presented and tended to in-plane magnetic anisotropy. However, the L1(0) FePt(001) texture is obtained and exhibited perpendicular magnetic anisotropy as the film thickness is decreased to 10 nm. Its perpendicular coercivity (Hc(perpendicular)), saturation magnetization (Ms) and perpendicular squareness (S(perpendicular)) are 14.8 kOe, 795 emu/cm3 and 0.79, respectively. On the other hand, both the grain size and domain size of FePt film decrease with decreasing the film thickness of FePt. The grain size for 10-nm FePt film is as small as 9.7 nm with domain size of 123 nm, which reveal its significant potential as perpendicular magnetic recording media for ultra high-density recording.

Discrete cortical responses from multi-site supra-choroidal electrical stimulation in the feline retina

Exploration into electrical stimulation of the retina has thus far focussed primarily upon the development of prostheses targeted at one of two sites of intervention - the epi- and sub-retinal surfaces. These two approaches have sound, logical merit owing to their proximity to retinal neurons and their potential to deliver stimuli via the surviving retinal neural networks respectively. There is increasing evidence, however, that electric field effects, electrode engineering limitations, and electrode-tissue interactions limit the spatial resolution that once was hoped could be elicited from electrical stimulation at epi- and sub-retinal sites. An alternative approach has been proposed that places a stimulating electrode array within the supra-choroidal space - that is, between the sclera and the choroid. Here we investigate whether discrete, cortical activity patterns can be elicited via electrical stimulation of a feline retina using a custom, 14 channel, silicone rubber and Pt electrode array arranged in two hexagons comprising seven electrodes each. Cortical responses from Areas 17/18 were acquired using a silicon-based, multi-channel, penetrating probe developed at IMTEK, University of Freiburg, within the European research project NeuroProbes. Multi-unit spike activity was recorded in synchrony with the presentation of electrical stimuli. Results show that distinct cortical response patterns could be elicited from each hexagon separated by 1.8 mm (center-to-center) with a center-to-center electrode spacing within each hexagon of 0.55 mm. This lends support that higher spatial resolution may also be discerned.

A transparent electrode array for simultaneous cortical potential recording and intrinsic signal optical imaging

Intrinsic signal optical imaging (ISOI) is a technique that enables researchers to relate changes in cortical activity in response to stimuli by measuring changes in hemoglobin oxygenation and local blood volume. As the time course of these changes - local blood volume in particular - is of the order of seconds, the neural activity that initiates these changes is only indirectly acquired in ISOI. To better correlate these events, it is beneficial to simultaneously record both the evoked cortical potentials and ISOI. In this study we present a novel, transparent, recording array that allows the combination of optical imaging with electrical recordings without the use of metal electrodes in the observation field. Pilot data were recorded after visual and electrical stimuli of the eye to prove the concept.

Analysis of the factors influencing living kidney donation: the experience in National Taiwan University Hospital

INTRODUCTION

Kidney transplantation provides a choice of active treatment for patients with chronic renal failure. However, the sources of organs are limited; therefore, living kidney donation is an alternative source. The regulation of organ donation in Taiwan stipulates that living organ donation is restricted to living related recipients. We sought to investigate factors that influenced or prevented individuals from living kidney donation in our center.

MATERIALS AND METHODS

From January 2005 to December 2008, there were 266 potential candidates who underwent evaluation for living kidney donation in our center.

RESULTS

Among the potential candidates, most were spouses (n=85, 31.9%), followed by parents (n=67, 25.1%), siblings (n=62, 23.3%), and children (n=40, 15%). Eventually, 124 candidates (47%) completed organ donation, most of whom were siblings (n=39, 31.5%), then parents (n=38, 30.6%), spouses (n=26), and children (n=18). Most donors were females, including mothers and sisters. The most frequent reason to not donate was unwillingness, due to potential influences on their health, economic stress due to suspension of their job, and objection of family members. In 34 candidates (23.9%), adverse health factors of potential candidates prohibited them from donating, including age, chronic medical illness, hepatitis carrier status, severe depression, or mental retardation. Among 59 potential donor-recipient pairs with incompatible ABO blood types or highly sensitized to potential donors, 22 candidates completed living kidney donation.

CONCLUSION

Although laparoscopic nephrectomy for living kidney donation decreases the discomfort and hospital stay after donation, we can only promote living kidney donation if we can deal with the possible factors that prohibit candidates from living kidney donation, such as morbidity after organ donation, anxiety, or other factors. After analyzing those factors, we must also develop a protocol to closely follow the living kidney donors to ensure their health status and relieve their anxiety.

Biodegradation of propionitrile by Klebsiella oxytoca immobilized in alginate and cellulose triacetate gel

A microbial process for the degradation of propionitrile by Klebsiella oxytoca was studied. The microorganism, K. oxytoca, was isolated from the discharged wastewater of metal plating factory in southern Taiwan and adapted for propionitrile biodegradation. The free and immobilized cells of K. oxytoca were then examined for their capabilities on degrading propionitrile under various conditions. Alginate (AL) and cellulose triacetate (CT) techniques were applied for the preparation of immobilized cells. The efficiency and produced metabolic intermediates and end-products of propionitrile degradation were monitored in bath and continuous bioreactor experiments. Results reveal that up to 100 and 150 mM of propionitrile could be removed completely by the free and immobilized cell systems, respectively. Furthermore, both immobilized cell systems show higher removal efficiencies in wider ranges of temperature (20-40 degrees C) and pH (6-8) compared with the free cell system. Results also indicate that immobilized cell system could support a higher cell density to enhance the removal efficiency of propionitrile. Immobilized cells were reused in five consecutive degradation experiments, and up to 99% of propionitrile degradation was observed in each batch test. This suggests that the activity of immobilized cells can be maintained and reused throughout different propionitrile degradation processes. A two-step pathway was observed for the biodegradation of propionitrile. Propionamide was first produced followed by propionic acid and ammonia. Results suggest that nitrile hydratase and amidase were involved in the degradation pathways of K. oxytoca. In the continuous bioreactor, both immobilized cells were capable of removing 150 mM of propionitriles completely within 16h, and the maximum propionitriles removal rates using AL and CT immobilized beads were 5.04 and 4.98 mM h(-1), respectively. Comparing the removal rates obtained from batch experiments with immobilized cells (AL and CT were 1.57 and 2.18 mM h(-1) at 150 mM of propionitrile, respectively), the continuous-flow bioreactor show higher potential for practical application.

Synergistic antitumor effect of TRAIL and adriamycin on the human breast cancer cell line MCF-7

The aim of the present study was to determine the effect of the combination of tumor necrosis factor-related apoptosis-inducing ligand (TRAIL) and adriamycin (ADM) on the human breast cancer cell line MCF-7 and to identify potential mechanisms of apoptosis. Cell viability was analyzed by the MTT assay and the synergistic effect was assessed by the Webb coefficient. Apoptosis was quantified using the annexin V-FITC and propidium iodide staining flow cytometry. The mRNA expression of TRAIL receptors was measured by RT-PCR. Changes in the quantities of Bax and caspase-9 proteins were determined by Western blot. MCF-7 cells were relatively resistant to TRAIL (IC50 >10 microg/mL), while MCF-7 cells were sensitive to ADM (IC50 <10 microg/mL). A subtoxic concentration of ADM (0.5 microg/mL) combined with 0.1, 1, or 10 microg/mL TRAIL had a synergistic cytotoxic effect on MCF-7 cells, which was more marked with the combination of TRAIL (0.1 microg/mL) and ADM (0.5 microg/mL). In addition, the combined treatment with TRAIL and ADM significantly increased cell apoptosis from 9.8% (TRAIL) or 17% (ADM) to 38.7%, resulting in a synergistic apoptotic effect, which is proposed to be mediated by up-regulation of DR4 and DR5 mRNA expression and increased expression of Bax and caspase-9 proteins. These results suggest that the combination of TRAIL and ADM might be a promising therapy for breast cancer.