[The relationship between early Dao Yin, Qi and meridian theory]

This paper introduced and summarized the ways and skills of promoting the circulation of air in the human body (Dao Yin Xing Qi) in Dao Yin Tu and Yin Shu and compared them with the way of breathing in Qu Gu Shi Qi. It was found that early Dao Yin drew on breathing thinking (Qi theory) and was meaningful for human health and helpful in examining how Qi theory was shaped and developed. It was also found that Dao Yin treated diseases based on meridian theories because Dao Yin for disease treatment in Dao Yin Tu and Yin Shu was related with the eleven meridians and their main symptoms in Mai Shu. The methods of practicing Dao Yin were likely to take references from the transmission routes of human meridians. The relationship between Dao Yin, Qi and meridians indicated that Qi and meridians were taken as the focus for people to understand the human body. Qi and meridians theories, widely accepted in ancient times, were taken as theoretical guidelines by stone needle, moxibustion and Dao Yin to maintain health and disease treatment.

The timing of intravenous oxytocin administration is crucial to minimize perioperative blood loss during first-trimester suction curettage for missed abortion

BACKGROUND

Oxytocin is commonly used to reduce blood loss during suction curettage for missed abortion. However, the potential of oxytocin to mitigate blood loss in early pregnancy remains controversial. Based on the hypothesis that the "timing" of oxytocin administration may be a critical factor, we investigated whether the timing of intravenous (IV) administration is associated with reduced perioperative blood loss during first-trimester suction curettage for missed abortion.

METHODS

The medical charts of 146 patients with ultrasound-confirmed first-trimester missed abortion who underwent suction curettage with IV oxytocin administration were retrospectively reviewed.

RESULTS

Among the patients, 67 received 10 IU of IV oxytocin before suction curettage (early-oxytocin administration group), while 79 patients received 10 IU of IV oxytocin after suction curettage (late-oxytocin administration group). The demographic features between the two groups did not significantly differ. However, there was a lower proportion of nulliparous patients in the early-oxytocin administration group than in the late-oxytocin administration group (38.8% vs 60.8%, p = 0.006). The perioperative blood loss amount was significantly lower in the early-oxytocin administration group than in the late-oxytocin administration group (60 [range: 50-100] vs 100 [range: 30-250] mL, p = 0.001). Moreover, the multivariate logistic regression analysis showed that the early-oxytocin administration group had a lower risk for a perioperative blood loss amount of ≥100 mL than the late-oxytocin administration group (0.23 [range: 0.10-0.55], p = 0.001); a gestational age of 9-12 weeks ( p = 0.009) was found to be associated with an increased risk for a perioperative blood loss amount of ≥100 mL.

CONCLUSION

Compared with late-oxytocin administration, early-oxytocin administration could reduce perioperative blood loss during first-trimester suction curettage for missed abortion. However, the results require further investigation.

To do one and to get more: Part I. Diabetes and bone

Type 2 diabetes mellitus (T2DM), is a chronic metabolic disease, characterized by the presence of hyperglycemia and insulin resistance. The key treatment strategies for T2DM include modification of lifestyle, medications, and continuous glucose monitoring. DM patients often have DM-associated morbidities and comorbidities; however, disorders of musculoskeletal system are often neglected, compared to other major systems in DM patients. Based on sharing similar pathophysiology of DM and osteoporosis, it is supposed that the use of antidiabetic agents (ADAs) may not only provide the lowering glucose level effect and the maintenance of the sugar homeostasis to directly delay the tissue damage secondary to hyperglycemia but also offer the benefits, such as the prevention of developing osteoporosis and fractures. Based on the current review, evidence shows the positive correlation between DM and osteoporosis or fracture, but the effectiveness of using ADA in the prevention of osteoporosis and subsequent reduction of fracture seems to be inconclusive. Although the benefits of ADA on bone health are uncertain, the potential value of "To do one and to get more" therapeutic strategy should be always persuaded. At least, one of the key treatment strategies as an establishment of healthy lifestyle may work, because it improves the status of insulin resistance and subsequently helps DM control, prevents the DM-related micro- and macrovascular injury, and possibly strengthens the general performance of musculoskeletal system. With stronger musculoskeletal system support, the risk of "fall" may be decreased, because it is associated with fracture. Although the ADA available in the market does not satisfy the policy of "To do one and to get more" yet, we are looking forward to seeing the continuously advanced technology of drug development on diabetic control, and hope to see their extra-sugar-lowering effects.

[Accuracy and retention of denture bases fabricated by injection molding, milling, and three-dimensional printing]

Objective: To compare the accuracy and retention of denture bases fabricated by injection molding, milling, and three-dimensional (3D) printing fabricating, in order to provide some references for clinical practice. Methods: A maxillary edentulous jaw model made was used to duplicated 10 working casts. The casts were numbered and scanned. The wax pattern was designed by digital ways and conventional methods and then the denture bases were fabricated by injection molding, milling, and 3D printing. The tissue surface of experimental denture base was obtained using a dental laboratory scanner. The deviation between the tissue surface of the fabricated denture bases and the working model was evaluated. A digital force gauge was used to measure the traction force. Results: The milling group [(0.076±0.026) mm] was more accurate than the 3D printing group [(0.117±0.041) mm] (P<0.05) and the injection group [(0.120± 0.025) mm] (P<0.05). The accuracy of 3D printing group and that of injection group were not statistically significant (P>0.05). The milling group [(9.55±2.44) N] demonstrated greater retentive force than 3D printing group [(5.19±0.06) N] and injection molding group [(1.52±0.52) N] (P<0.05). Conclusions: The denture base fabricated by milling was more accurate and showed the greatest retentive force than the other groups. And 3D printing group showed better retentive force than the injection molding group. Both digital manufacturing methods can meet the requirements of clinical application.

Trial of labor after cesarean section

Fourth, before shared decision making with pregnant women, the exact benefits and risks of both TOLAC and ERCD should be fully and thorough in discussion. A speedy recovery, the enjoying self-control natural birth, immediately entering into a bonding with their newborns and breastfeeding faster of mothers and avoidance of C/S related morbidity, such as intrauterine adhesion, pelvic adhesion, the risk of subsequent pregnancy (placenta accreta spectrum), and postpartum hemorrhage are reported to encourage women favor the TOLAC; and by contrast, for ERCD, the possible advantages include easily controlling labor pain, avoidance of vaginal or pelvic floor damage with subsequent development of sequela, such as stress urinary incontinence, lower genito-urinary tract dysfunction, pelvic organ prolapse etc., and the ease of a scheduled birth and following postpartum care [5,6,9,19-21].

Lawson Criterion for Ignition Exceeded in an Inertial Fusion Experiment

For more than half a century, researchers around the world have been engaged in attempts to achieve fusion ignition as a proof of principle of various fusion concepts. Following the Lawson criterion, an ignited plasma is one where the fusion heating power is high enough to overcome all the physical processes that cool the fusion plasma, creating a positive thermodynamic feedback loop with rapidly increasing temperature. In inertially confined fusion, ignition is a state where the fusion plasma can begin "burn propagation" into surrounding cold fuel, enabling the possibility of high energy gain. While "scientific breakeven" (i.e., unity target gain) has not yet been achieved (here target gain is 0.72, 1.37 MJ of fusion for 1.92 MJ of laser energy), this Letter reports the first controlled fusion experiment, using laser indirect drive, on the National Ignition Facility to produce capsule gain (here 5.8) and reach ignition by nine different formulations of the Lawson criterion.

Experimental achievement and signatures of ignition at the National Ignition Facility

An inertial fusion implosion on the National Ignition Facility, conducted on August 8, 2021 (N210808), recently produced more than a megajoule of fusion yield and passed Lawson's criterion for ignition [Phys. Rev. Lett. 129, 075001 (2022)10.1103/PhysRevLett.129.075001]. We describe the experimental improvements that enabled N210808 and present the first experimental measurements from an igniting plasma in the laboratory. Ignition metrics like the product of hot-spot energy and pressure squared, in the absence of self-heating, increased by ∼35%, leading to record values and an enhancement from previous experiments in the hot-spot energy (∼3×), pressure (∼2×), and mass (∼2×). These results are consistent with self-heating dominating other power balance terms. The burn rate increases by an order of magnitude after peak compression, and the hot-spot conditions show clear evidence for burn propagation into the dense fuel surrounding the hot spot. These novel dynamics and thermodynamic properties have never been observed on prior inertial fusion experiments.

Design of an inertial fusion experiment exceeding the Lawson criterion for ignition

We present the design of the first igniting fusion plasma in the laboratory by Lawson's criterion that produced 1.37 MJ of fusion energy, Hybrid-E experiment N210808 (August 8, 2021) [Phys. Rev. Lett. 129, 075001 (2022)10.1103/PhysRevLett.129.075001]. This design uses the indirect drive inertial confinement fusion approach to heat and compress a central "hot spot" of deuterium-tritium (DT) fuel using a surrounding dense DT fuel piston. Ignition occurs when the heating from absorption of α particles created in the fusion process overcomes the loss mechanisms in the system for a duration of time. This letter describes key design changes which enabled a ∼3-6× increase in an ignition figure of merit (generalized Lawson criterion) [Phys. Plasmas 28, 022704 (2021)1070-664X10.1063/5.0035583, Phys. Plasmas 25, 122704 (2018)1070-664X10.1063/1.5049595]) and an eightfold increase in fusion energy output compared to predecessor experiments. We present simulations of the hot-spot conditions for experiment N210808 that show fundamentally different behavior compared to predecessor experiments and simulated metrics that are consistent with N210808 reaching for the first time in the laboratory "ignition."

Association between Pre-Pregnancy Overweightness/Obesity and Pregnancy Outcomes in Women with Polycystic Ovary Syndrome: A Systematic Review and Meta-Analysis

Polycystic ovary syndrome (PCOS) is a common metabolic problem in women of reproductive age. Evidence suggests pregnant women with PCOS may have a higher risk of the development of adverse pregnancy outcomes; however, the relationship between pre-pregnancy overweight/obesity and pregnancy outcomes in women with PCOS remains uncertain. We try to clarify the relationship between pre-pregnancy overweight/obesity and subsequent pregnancy outcomes. Therefore, we conducted this systematic review and meta-analysis. We used the databases obtained from the PubMed, Embase, Web of Science, and Cochrane databases, plus hand-searching, to examine the association between pre-pregnancy overweightness/obesity and pregnancy outcomes in women with PCOS from inception to 4 February 2022. A total of 16 cohort studies, including 14 retrospective cohort studies (n = 10,496) and another two prospective cohort studies (n = 818), contributed to a total of 11,314 women for analysis. The meta-analysis showed significantly increased odds of miscarriage rate in PCOS women whose pre-pregnancy body mass index (BMI) is above overweight (OR 1.71 [95% CI 1.38–2.11]) or obese (OR 2.00 [95% CI 1.38–2.90]) under a random effect model. The tests for subgroup difference indicated the increased risk was consistent, regardless which body mass index cut-off for overweight (24 or 25 kg/m²) or obesity (28 and 30 kg/m²) was used. With the same strategies, we found that pregnant women in the control group significantly increased live birth rate compared with those pregnant women with PCOS as well as pre-pregnancy overweight/obesity (OR 0.79 [95% CI 0.71–0.89], OR 0.78 [95% CI 0.67–0.91]). By contrast, we did not find any association between PCOS women with pre-pregnancy overweight/obesity and preterm birth. Based on the aforementioned findings, the main critical factor contributing to a worse pregnancy outcome may be an early fetal loss in these PCOS women with pre-pregnancy overweight/obesity. Since PCOS women with pre-pregnancy overweightness/obesity were associated with worse pregnancy outcomes, we supposed that weight reduction before attempting pregnancy in the PCOS women with pre-pregnancy overweightness/obesity may improve the subsequent pregnancy outcomes.

[Early diagnosis and predictive model for hepatitis B virus-related hepatocellular carcinoma]

Most hepatocellular carcinoma are diagnosed at an advanced stage and thereby have a high mortality rate. Thus, the key to improving patient prognosis is early diagnosis of hepatocellular carcinoma. In recent years, Asian scholars have summarized a series of hepatocellular carcinoma risk score model for population with chronic hepatitis B, which can help to identify high-risk groups early and improve the early diagnosis rate. This paper briefly analyzes the risk factors and validated risk model for early prediction of hepatitis B virus-related hepatocellular carcinoma, and further reviews the effect of antiviral therapy on the risk of hepatocellular carcinoma.

[The sources of the attached drawings to Tanksuqnameh]

Tanksuqnameh (Yi Li Han) as the earliest Persian transcription of traditional Chinese medicine for the west, has great value in the history of Sino-Iranian medical cultural exchanges. The eleven drawings attached to Tanksuqnameh concerning meridians and pulse diagnosis were compared to relative paintings attached to some ancient Chinese medical books. It was found that eight of the drawings attached to Tanksuqnameh came from the paintings attached to The Zhuan Tu Ju Jie of the Yellow Emperor Eighty-One Nan Jing by Li Jiong. The sources of the three paintings have not been identified. However, based on the comparison between the three paintings attached to Tanksuqnameh and the paintings in the medical books in the Ming Dynasty in terms of outlines, names and the content, they might come from the same medical book as a reference.