Image quality and dose characteristics for an O-arm intraoperative imaging system with model-based image reconstruction

PURPOSE

To assess the imaging performance and radiation dose characteristics of the O-arm CBCT imaging system (Medtronic Inc., Littleton MA) and demonstrate the potential for improved image quality and reduced dose via model-based image reconstruction (MBIR).

METHODS

Two main studies were performed to investigate previously unreported characteristics of the O-arm system. First is an investigation of dose and 3D image quality achieved with filtered back-projection (FBP) - including enhancements in geometric calibration, handling of lateral truncation and detector saturation, and incorporation of an isotropic apodization filter. Second is implementation of an MBIR algorithm based on Huber-penalized likelihood estimation (PLH) and investigation of image quality improvement at reduced dose. Each study involved measurements in quantitative phantoms as a basis for analysis of contrast-to-noise ratio and spatial resolution as well as imaging of a human cadaver to test the findings under realistic imaging conditions.

RESULTS

View-dependent calibration of system geometry improved the accuracy of reconstruction as quantified by the full-width at half maximum of the point-spread function - from 0.80 to 0.65 mm - and yielded subtle but perceptible improvement in high-contrast detail of bone (e.g., temporal bone). Standard technique protocols for the head and body imparted absorbed dose of 16 and 18 mGy, respectively. For low-to-medium contrast (<100 HU) imaging at fixed spatial resolution (1.3 mm edge-spread function) and fixed dose (6.7 mGy), PLH improved CNR over FBP by +48% in the head and +35% in the body. Evaluation at different dose levels demonstrated 30% increase in CNR at 62% of the dose in the head and 90% increase in CNR at 50% dose in the body.

CONCLUSIONS

A variety of improvements in FBP implementation (geometric calibration, truncation and saturation effects, and isotropic apodization) offer the potential for improved image quality and reduced radiation dose on the O-arm system. Further gains are possible with MBIR, including improved soft-tissue visualization, low-dose imaging protocols, and extension to methods that naturally incorporate prior information of patient anatomy and/or surgical instrumentation.

Activation of the Nuclear Erythroid 2-Related Factor 2 Antioxidant Responsive Element (Nrf2-ARE) Signaling Pathway Alleviates Acute Graft-Versus-Host Disease by Reducing Oxidative Stress and Inhibiting Infiltration of Inflammatory Cells in an Allogeneic Stem Cell Transplantation Mouse Model

Background

Acute graft-versus-host disease (aGVHD) limits the wider application of hematopoietic stem cell transplantation (HSCT). We explored the relationship between the Nrf2-ARE signaling pathway and aGVHD and identified effective and efficient therapeutic targets for the prevention and management of aGVHD following HSCT.

Material/Methods

C57BL/6 and BALB/c mice were used to establish the aGVHD model. The bone marrow and spleen mononuclear cells were separated from the donor mice and injected into the caudal vein of recipient mice that had undergone total body irradiation (TBI, 8 Gy). Sulforaphane (SFN) was used to activate the Nrf2-ARE signaling pathway.

Results

The long-term survival rate of the SFN group was higher than that of the control group (40% vs. 0%, p<0.05, n=10). There were worse pathological changes and a greater infiltration of inflammatory cells in the liver, small intestine, and lung tissues of the control group. Furthermore, the Nrf2, NQO1, and HO-1 mRNA and protein levels were higher in the small intestines of the SFN group than in the control group (p<0.05, n=4).

Conclusions

The Nrf2-ARE signaling pathway plays a vital role in preventing aGVHD in an HSCT mouse model by regulating the expression of the downstream antioxidant genes NQO1 and HO-1 and by inhibiting the local inflammatory reaction.

Long-term efficacy and safety of sonidegib in patients with locally advanced and metastatic basal cell carcinoma: 30-month analysis of the randomized phase 2 BOLT study

BACKGROUND

Patients with locally advanced basal cell carcinoma (laBCC) or metastatic BCC (mBCC), two difficult-to-treat populations, have had limited treatment options. Sonidegib, a hedgehog pathway inhibitor (HPI), was approved in laBCC based on results from the BOLT trial.

OBJECTIVE

To evaluate long-term efficacy and safety of sonidegib in laBCC and mBCC in the BOLT 18- and 30-month analyses.

METHODS

BOLT (NCT01327053, ClinicalTrials.gov), a double-blind phase 2 study, enrolled patients from July 2011 until January 2013. Eligible HPI-treatment-naïve patients with laBCC not amenable to curative surgery/radiotherapy or mBCC were randomized 1 : 2 to sonidegib 200 mg (laBCC, n = 66; mBCC, n = 13) or 800 mg (laBCC, n = 128; mBCC, n = 23). Tumour response was assessed per central and investigator review.

RESULTS

With 30 months of follow-up, among patients treated with sonidegib 200 mg (approved dose), objective response rates were 56.1% (central) and 71.2% (investigator) in laBCC and 7.7% (central) and 23.1% (investigator) in mBCC. Tumour responses were durable as follows: median duration of response was 26.1 months (central) and 15.7 months (investigator) in laBCC and 24.0 months (central) and 18.1 months (investigator) in mBCC. Five patients with laBCC and three with mBCC in the 200-mg arm died. Median overall survival was not reached in either population; 2-year overall survival rates were 93.2% (laBCC) and 69.3% (mBCC). In laBCC, efficacy was similar regardless of aggressive or non-aggressive histology. Sonidegib 200 mg continued to have a better safety profile than 800 mg, with lower rates of grade 3/4 adverse events (43.0% vs. 64.0%) and adverse events leading to discontinuation (30.4% vs. 40.0%).

CONCLUSION

Sonidegib continued to demonstrate long-term efficacy and safety in these populations. These data support the use of sonidegib 200 mg per local treatment guidelines.

Technical Note: Known-Component Registration for Robotic Drill Guide Positioning

A method for x-ray-guided robotic positioning of surgical instruments is reported and evaluated in preclinical studies of spine pedicle screw placement with the aim of improving delivery of transpedicle drills and screws. The known-component registration (KC-Reg) algorithm was used to register the 3D patient CT and the surface model of a drill guide to intraoperatively acquired 2D radiographs. Resulting transformations, combined with offline hand-eye calibration, drive a robotically-held drill guide to target trajectories established in the preoperative patient CT. The proposed method was assessed against more conventional surgical tracker guidance, and robustness to clinically realistic errors was tested in phantom and cadaver studies. Target registration error (TRE) was computed as drill guide deviation from the planned trajectory. The KC-Reg approach resulted in 1.51 ± 0.51 mm error at tooltip and 1.01 ± 0.92° in approach angle, showing comparable performance to the tracker-guided approach. In cadaver studies with anatomical deformation, TRE of 2.31 ± 1.05 mm and 0.66 ± 0.62° were observed, with statistically improved performance over a surgical tracker through registration of locally rigid bony anatomy. X-ray guidance offers an accurate means of driving robotic systems that is compatible with conventional fluoroscopic workflow. Specifically, such procedures involve multi-planar fluoroscopic views that are qualitatively interpreted by the surgeon; the KC-Reg approach accomplishes this using the same multi-planar views to provide greater quantitative accuracy and valuable guidance and QA. The method was robust against anatomical deformation due to the radiographic scene's local nature used in registration, presenting a potentially major surgical benefit.

Tissue-Engineered Vascular Rings from Human iPSC-Derived Smooth Muscle Cells

There is an urgent need for an efficient approach to obtain a large-scale and renewable source of functional human vascular smooth muscle cells (VSMCs) to establish robust, patient-specific tissue model systems for studying the pathogenesis of vascular disease, and for developing novel therapeutic interventions. Here, we have derived a large quantity of highly enriched functional VSMCs from human induced pluripotent stem cells (hiPSC-VSMCs). Furthermore, we have engineered 3D tissue rings from hiPSC-VSMCs using a facile one-step cellular self-assembly approach. The tissue rings are mechanically robust and can be used for vascular tissue engineering and disease modeling of supravalvular aortic stenosis syndrome. Our method may serve as a model system, extendable to study other vascular proliferative diseases for drug screening. Thus, this report describes an exciting platform technology with broad utility for manufacturing cell-based tissues and materials for various biomedical applications.

[Dynamic detection of surface blood flow in rat heart and its application in real time identification of myocardial infarction model]

Objective: To establish a method for monitoring the surface blood flow in the heart of rats, and to clarify the relationship between the degree of myocardial infarction and the blood perfusion on the surface of the heart, so as to provide a new indicator for the identification of rat myocardial infarction model. Methods: The rats were divided into control group (n=23) and model group (n=107), the rat hearts were scanned by the laser doppler perfusion imager before and after operation respectively, and the data was analyzed to acquire the rate of surface blood flow change of the heart. Myocardial infarction size of model group was detected by NBT. Model group were divided into three subgroups of mild myocardial infarction, moderate myocardial infarction and severe myocardial infarction according to the myocardial infarction size, and an analysis was made on the correlativity between rate of surface blood flow change of the heart and myocardial infarction size. Results: Myocardial infarction size was highly correlated to the rate of surface blood flow change of the heart in model group (r=0.849 6, P<0.000 1). There was no significant correlation between infarction size and heart blood flow in the mild myocardial infarction subgroup (r=-0.133 6, P>0.05), while the correlation in moderate myocardial infarction was significant (r=0.721 7, P<0.000 1), and the highest correlation was shown in severe myocardial infarction subgroup (r=0.910 2, P<0.000 1). Conclusion: The heart surface blood flow has a close relationship with the myocardial infarction size in rat, so the change of heart blood perfusion can beused as an effective reference to establish and identify rat myocardial infarction model.

An integrated analysis identifies STAT4 as a key regulator of ovarian cancer metastasis

Epithelial ovarian cancer (EOC) is one of the most common gynecological cancers, with diagnosis often at a late stage. Metastasis is a major cause of death in patients with EOC, but the underlying molecular mechanisms remain obscure. Here, we utilized an integrated approach to find potential key transcription factors involved in ovarian cancer metastasis and identified STAT4 as a critical player in ovarian cancer metastasis. We found that activated STAT4 was overexpressed in epithelial cells of ovarian cancer and STAT4 overexpression was associated with poor outcome of ovarian cancer patients, which promoted metastasis of ovarian cancer in both in vivo and in vitro. Although STAT4 mediated EOC metastasis via inducing epithelial-to-mesenchymal transition (EMT) of ovarian cancer cells in vivo, STAT4 failed to induce EMT directly in vitro, suggesting that STAT4 might mediate EMT process via cancer-stroma interactions. Further functional analysis revealed that STAT4 overexpression induced normal omental fibroblasts and adipose- and bone marrow-derived mesenchymal stem cells to obtain cancer-associated fibroblasts (CAF)-like features via induction of tumor-derived Wnt7a. Reciprocally, increased production of CAF-induced CXCL12, IL6 and VEGFA within tumor microenvironment could enable peritoneal metastasis of ovarian cancer via induction of EMT program. In summary, our study established a model that STAT4 promotes ovarian cancer metastasis via tumor-derived Wnt7a-induced activation of CAFs.

Effects of preheating temperature, moisture, and sodium metabisulfite content on quality of noodles prepared from maize flour or meal / Efecto de la temperatura de precalentamiento, humedad y contenido de metabisulfito de sodio en la calidad de fideos de harina o de sémola de maíz

Preheating temperature, maize flour particle size, and levels of water and sulfite were tested during preparation of maize noodles. Heating a mixture of maize flour and water (43-45 % moisture) at 90-95 °C was required to extrude maize noodles using a pasta maker. Maize flour with smaller par ticle size yielded better noodles than did maize meal. Addition of sulfite enabled production of noodles at lower processing temperatures, however, cooking losses increased. Addition of more water yielded noodles that required longer cooking time, but decreased cooking losses. Functionalities of starch and protein in raw ingredients and in products were determined. Starch gelatinized and retrograded during processing of maize extrudates, as indicated by changes in pasting viscosity curves. Above 40 °C, maize proteins increased mixing viscosity of dough. Increased integrity of cooked maize noodles, however, corresponded to increased amounts of gelatinized and retrograded starch.

Increase of rutin antioxidant activity by generating Maillard reaction products with lysine

Rutin exists in medicinal herbs, fruits, vegetables, and a number of plant-derived sources. Dietary sources containing rutin are considered beneficial because of their potential protective roles in multiple diseases related to oxidative stresses. In the present study, the change and antioxidation activity of rutin in Maillard reaction with lysine through a heating process were investigated. There is release of glucose and rhamnose that interact with lysine to give Maillard reaction products (MRPs), while rutin is converted to less-polar quercetin and a small quantity of isoquercitrin. Because of their high cell-membrane permeability, the rutin-lysine MRPs increase the free radical-scavenging activity in HepG2 cells, showing cellular antioxidant activity against Cu(2+)-induced oxidative stress higher than that of rutin. Furthermore, the MRPs significantly increased the Cu/Zn SOD (superoxide dismutase) activity and Cu/Zn SOD gene expression of HepG2 cells, consequently enhancing antioxidation activity.

3D-Printed Biodegradable Polymeric Vascular Grafts

Congenital heart defect interventions may benefit from the fabrication of patient-specific vascular grafts because of the wide array of anatomies present in children with cardiovascular defects. 3D printing is used to establish a platform for the production of custom vascular grafts, which are biodegradable, mechanically compatible with vascular tissues, and support neotissue formation and growth.

The redispersion behaviour of Pt on the surface of Fe2O3

Pt could be redispersed on the surface of Fe₂O₃ with alternating treatment under oxidative and reductive atmospheres.

Intracavernous delivery of clonal mesenchymal stem cells rescues erectile function in the streptozotocin-induced diabetic mouse

The major hurdle for the clinical application of stem cell therapy is the heterogeneous nature of the isolated cells, which may cause different treatment outcomes. The aim of this study was to examine the effectiveness of mouse clonal bone marrow-derived stem cells (BMSCs) obtained from a single colony by using subfractionation culturing method for erectile function in diabetic animals. Twelve-week-old C57BL/6J mice were divided into four groups: controls, diabetic mice, and diabetic mice treated with a single intracavernous injection of PBS (20 μL) or clonal BMSCs (3 × 10(5) cells/20 μL). Clonal BMSCs were isolated from 5-week-old C3H mice. Two weeks after treatment, erectile function was measured by electrical stimulation of the cavernous nerve. The penis was stained with antibodies to PECAM-1, smooth muscle α-actin, neuronal nitric oxide synthase (nNOS), neurofilament, and phosphorylated endothelial NOS (phospho-eNOS). We also performed Western blot for phospho-eNOS, and eNOS in the corpus cavernosum tissue. Local delivery of clonal BMSCs significantly restored cavernous endothelial and smooth muscle cell contents, and penile nNOS and neurofilament contents, and induced eNOS phosphorylation (Ser1177) in diabetic mice. Intracavernous injection of clonal BMSCs induced significant recovery of erectile function, which reached 80-90% of the control values. Clonal BMSCs successfully restored erectile function through dual angiogenic and neurotrophic effects in diabetic mice. The homogenous nature of clonal mesenchymal stem cells may allow their clinical applications and open a new avenue through which to treat diabetic erectile dysfunction.

KiSS1-induced GPR54 signaling inhibits breast cancer cell migration and epithelial-mesenchymal transition via protein kinase D1

The metastasis suppressor protein Kisspeptin regulates cancer cell proliferation and motility through its receptor, GRP54. However, the critical downstream effectors remain unclear. In this study, we investigated GPR54 signaling in breast cancer cells. Kisspeptin stimulation caused a decrease in migration of multiple breast cancer cell lines. Also, Kisspeptin inhibited MDA-MB-231 cell colony formation in 3D matrigel culture and in soft agar. Kisspeptin treatment elevated phosphorylated PKD1 in a PKC-dependent manner. However, knockdown of either GPR54 or PKD1 increased breast cancer cell migration and invasion. Furthermore, GPR54 knockdown blocked Kisspeptin-induced phosphorylation of PKD1. Finally, Kisspeptin stimulation induced a PKD1 phosphorylation-dependent decrease in expression of Slug, a transcription factor that drives epithelial-mesenchymal transition (EMT), and a concomitant increase in E-cadherin expression. Therefore, KiSS1/GPR54 signaling through PKD1 acts to maintain the epithelial state and to inhibit breast cancer cell invasiveness, and exerts functions associated with its role as a metastasis suppressor.

Contrasting biofunctionalization strategies for the enhanced endothelialization of biodegradable vascular grafts

Surface modification of biodegradable vascular grafts is an important strategy to improve the in situ endothelialization of tissue engineered vascular grafts (TEVGs) and prevent major complications associated with current synthetic grafts. Important strategies for improving endothelialization include increasing endothelial cell mobilization and increased endothelial cell capture through biofunctionalization of TEVGs. The objective of this study was to assess two biofunctionalization strategies for improving endothelialization of biodegradable polyester vascular grafts. These techniques consisted of cross-linking heparin to graft surfaces to immobilize vascular endothelial growth factor (VEGF) or antibodies against CD34 (anti-CD34Ab). To this end, heparin, VEGF, and anti-CD34Ab attachment and quantification assays confirmed the efficacy of the modification strategy. Cell attachment and proliferation on these groups were compared to unmodified grafts in vitro and in vivo. To assess in vivo graft functionality, the grafts were implanted as inferior vena cava interpositional conduits in mice. Modified vascular grafts displayed increased endothelial cell attachment and activity in vivo, according to microscopy techniques, histological results, and eNOS expression. Inner lumen diameter of the modified grafts was also better maintained than controls. Overall, while both functionalized grafts outperformed the unmodified control, grafts modified with anti-CD34Ab appeared to yield the most improved results compared to VEGF-loaded grafts.

Superior catalytic performance of Ce1−xBixO2−δsolid solution and Au/Ce1−xBixO2−δfor 5-hydroxymethylfurfural conversion in alkaline aqueous solution

Ce_1−xBi_xO_2−δand Au/Ce_1−xBi_xO_2−δexhibited superior catalytic performance towards 5-hydroxymethylfurfural conversion.

Aerobic oxidation of 5-hydroxymethylfurfural (HMF) effectively catalyzed by a Ce0.8Bi0.2O2−δ supported Pt catalyst at room temperature

98% yield of FDCA was obtained within 30 min at room temperature when HMF oxidation was catalyzed by Pt/Ce_0.8Bi_0.2O_2−δ.