Separation of pure and immunoreactive virus-like particles using gel filtration chromatography following immobilized metal ion affinity chromatography

A purification process was developed to obtain highly pure rVP2H particles, formed by a structural protein (VP2) of the infectious bursal disease virus (IBDV) with six additional histidine residues at its C-terminus. The ultimate goal was the development of an efficient subunit vaccine against IBDV infection. The particles within the infected High-Five (Hi-5) cell lysates were partially purified by employing immobilized metal ion (Ni(2+)) affinity chromatography (IMAC). The initial step could recover approximately 85% of immunoreactive rVP2H proteins but failed to separate the rVP2H particles from the free rVP2H proteins or its degraded products. To separate the particulate form from the free form of rVP2H, an additional step was added, which used either gel filtration chromatography or CsCl density gradient ultracentrifugation. Both were able to produce extremely pure rVP2H particles with a buoyant density close to 1.27 g/cm(3). However, the former method can process a larger sample volume than does the latter. By integrating IMAC and gel filtration chromatography, 1 mg of extremely pure rVP2H particles was routinely obtained from a 500 mL Hi-5 cell culture broth. The separation of the particulate form from the free form of rVP2H proteins exposes their respective immunogenicity to induce the virus-neutralizing antibodies and the ability to protect chickens from IBDV infection. Additionally, the abundant quantities of pure rVP2H particles coupled with their uniform dimensions facilitates an understanding of higher order structure of the immunogenic particles and can therefore result in improved vaccines against the virus.

Internal dosimetry for inhalation of hafnium tritide aerosols

Metal tritides with low dissolution rates may have residence times in the lungs which are considerably longer than the biological half-time normally associated with tritium in body water, resulting in long-term irradiation of the lungs by low energy beta particles and bremsstrahlung X rays. Samples of hafnium tritide were placed in a lung simulant fluid to determine approximate lung dissolution rates. Hafnium hydride samples were analysed for particle size distribution with a scanning electron microscope. Lung simulant data indicated a biological dissolution half-time for hafnium tritide on the order of 10(5) d. Hafnium hydride particle sizes ranged between 2 and 10 microns, corresponding to activity median aerodynamic diameters of 5 to 25 microns. Review of in vitro dissolution data, development of a biokinetic model, and determination of secondary limits for 1 micron AMAD particles are presented and discussed.

Acrokeratosis paraneoplastica (Bazex syndrome) with adenocarcinoma of the colon: report of a case and review of the literature

Acrokeratosis paraneoplastica is a rare disease and is uncommon even in patients with upper aerodigestive tract cancer. We report a 63-year-old man with a 1-month history of numerous pruritic lesions and vesicles on both feet. Although he had received local therapy, progressive dense scale formation involving both palms and both soles was found. Colonoscopy was performed because of hematochezia, and it revealed an early colon cancer. After the resection of the cancer, the skin lesions began to fall off dramatically. To the best of our knowledge, there is no report of acrokeratosis paraneoplastica associated with colon cancer in the literature. This is the first case report of acrokeratosis paraneoplastica associated with early colon cancer.

Structural analysis of the transcriptional activation region on Fis: crystal structures of six Fis mutants with different activation properties

The Fis protein regulates gene expression in Escherichia coli by activating or repressing transcription of a variety of genes. Fis can activate transcription when bound to DNA upstream of the RNA-polymerase-binding site, such as in the rrnB P1 promoter, or when bound to a site overlapping the -35 RNA polymerase binding site, such as in the proP P2 promoter. It has been suggested that transcriptional activation in both promoters results from interactions between specific amino acids within a turn connecting the B and C helices (the BC turn) in Fis and the C-terminal domain of the alpha-subunit of RNA polymerase (alphaCTD of RNAP). Here, crystal structures of six Fis BC turn mutants with different transcriptional activation properties, Q68A, R71Y, R71L, G72A, G72D and Q74A, were determined at 1.9 to 2.8 A resolution. Two of these mutants, R71Y and R71L, crystallized in unit cells which are different from that of wild-type Fis, and the structure of R71L offers the most complete Fis model to date in that the extended structure of the N-terminal region is revealed. The BC turn in all of these mutant structures remains in a nearly identical gamma gamma beta-turn conformation as present in wild-type Fis. Analyses of the molecular surfaces of the transactivation region of the mutants suggest that several residues in or near the BC turn, including Gln68, Arg71, Gly72 and Gln74, form a ridge that could contact the alphaCTD of RNAP on one side. The structures and biochemical properties of the mutants suggest that Arg71 is the most critical residue for contacting RNAP within this ridge and that the glycine at position 72 helps to stabilize the structure.

Image-plane cylindrical holographic stereogram

A two-step holographic process is introduced to fabricate a cylindrical multiplex hologram as an image-plane hologram. By adoption of the achromatic angle in the process the hologram is capable of generating an achromatic image. The most important factors, the location as well as the width of the viewing slits, that affect the quality of the observed image are analyzed and discussed. The change of aspect ratio for the observed image as a function of the viewing distance is theoretically and numerically analyzed. This method can not only eliminate the annoying picket-fence effect but can also increase the vertical viewing range for the observer. Computer simulations as well as experimental results are provided.

Ticlopidine-induced severe cholestatic hepatitis

We report a case study of an 86-year-old female patient with severe cholestatic hepatitis who was undergoing treatment with oral ticlopidine 250 mg daily for coronary artery disease. The patient had nausea and vomiting and was jaundiced after taking ticlopidine for 6 weeks. She was admitted to the hospital for further evaluation. Ultrasound and endoscopic retrograde cholangiopancreatography eliminated the presence of biliary obstruction. Results from a liver biopsy showed a histopathologic picture consistent with cholestatic hepatitis. Ticlopidine-induced cholestatic hepatitis has been reported 32 times in the foreign literature. This is the first reported severe cholestatic hepatitis (total bilirubin up to 43 mg/dl) case in Taiwan. Ticlopidine-related blood dyscrasia is a renowned adverse drug effect; liver function should be monitored in patients receiving ticlopidine therapy.

Correlation of bFGF, FGFR-1 and VEGF expression with vascularity and malignancy of human astrocytomas

OBJECTIVE

To investigate the correlation of angiogenic factor expression levels with the degrees of malignancy and vascularity and their clinicopathologic significance in astrocytomas.

STUDY DESIGN

Factor VIII-related antigen (FVIII-RAg) was used as the marker of endothelia and basic fibroblast growth factor (bFGF); FGF receptor (FGFR)-1 and vascular endothelial growth factor (VEGF) were qualitatively and quantitatively detected with immunohistochemistry and image analysis in 61 brain astrocytomas. The correlation with tumor grades, angiogenesis and prognosis was studied.

RESULTS

Measurement of FVIIIRAg expression could describe endothelial proliferation and vascularity, which were related to grade of tumor and prognosis. bFGF and VEGF expression levels in neoplastic astrocytes and endothelia were significantly different in various grades of astrocytoma. These angiogenic factors affected the positive reaction areas and integral optical densities of FVIII-RAg as well as survival time. In contrast, the expression of FGFR-1 was related to neither bFGF nor FVIIIRAg and had no significant effect on tumor malignancy.

CONCLUSION

Positive regulation by bFGF and autocrine/paracrine VEGF contributes to the growth and angiogenesis of astrocytomas. Measurement of endothelial cell proliferation with FVIIIRAg in tumor stroma and quantitative detection of angiogenic factor levels in neoplastic cells had prognostic value in brain astrocytomas. The results also indicate that inhibiting bFGF and VEGF expression and/or blocking their effects could be a very useful therapeutic strategy for malignant gliomas.

Role of the H protein in assembly of the photochemical reaction center and intracytoplasmic membrane in Rhodospirillum rubrum

Rhodospirillum rubrum is a model for the study of membrane formation. Under conditions of oxygen limitation, this facultatively phototrophic bacterium forms an intracytoplasmic membrane that houses the photochemical apparatus. This apparatus consists of two pigment-protein complexes, the light-harvesting antenna (LH) and photochemical reaction center (RC). The proteins of the photochemical components are encoded by the puf operon (LHalpha, LHbeta, RC-L, and RC-M) and by puhA (RC-H). R. rubrum puf interposon mutants do not form intracytoplasmic membranes and are phototrophically incompetent. The puh region was cloned, and DNA sequence determination identified open reading frames bchL and bchM and part of bchH; bchHLM encode enzymes of bacteriochlorophyll biosynthesis. A puhA/G115 interposon mutant was constructed and found to be incapable of phototrophic growth and impaired in intracytoplasmic membrane formation. Comparison of properties of the wild-type and the mutated and complemented strains suggests a model for membrane protein assembly. This model proposes that RC-H is required as a foundation protein for assembly of the RC and highly developed intracytoplasmic membrane. In complemented strains, expression of puh occurred under semiaerobic conditions, thus providing the basis for the development of an expression vector. The puhA gene alone was sufficient to restore phototrophic growth provided that recombination occurred.

Nominal shear or fracture mechanics in the assessment of composite-dentin adhesion?

This study addresses the anticipated problem of discriminating among high-performing dentin adhesives. The simplicity of the nominal shear bond test, despite being heavily criticized, has made it a routine procedure for the determination of bonding efficacy. A fracture mechanics approach has been suggested as a better assessment of bonding efficacy (Versluis et al., 1997). However, experimental complexity is a major limitation. It is hypothesized that a new, simplified interfacial fracture toughness test (Lin, 1994) will evaluate bonding agents differently if compared with the traditional shear bond test. Therefore, the objective of this study was to compare the performances of six dentin bonding agents subjected to the interfacial fracture toughness test (critical plane strain energy release rate) or to the nominal shear bond test (shear bond strength). Their performances were also characterized by scanning electron micrography of the fracture surfaces for evidence of dentin cohesive failure. Statistical analyses showed only marginal differences between these determinants of the two tests. However, when the analysis was applied only to the materials that had 100% frequency of dentin cohesive failure in shear testing, which also had high bonding efficacy, the difference in adhesive strengths between the two tests became significant. The reliability of the nominal shear test is questioned when dentin cohesive failure occurs, which usually is associated with high bonding efficacy. Since it is expected that bonding efficacy will increase further, the interfacial fracture toughness test is the preferred methodology to distinguish among high-performing dentin adhesives.

Disk-type multiplex holography

A theory for making a disk-type multiplex hologram is derived. This theory relates the final image point, as seen by the observer, to a point on the original three-dimensional object through a set of equations. From these equations the distortion of the image and the wavelength as seen by each individual eye can be evaluated. Computer simulation shows the characteristics of this hologram. Some experimental results also confirm these characteristics. By reversing the process and specifying a desired image, we generated a set of distorted two-dimensional originals. The hologram fabricated with these distorted images can generate nearly distortion-free images.

Amino acid conservation and clinical severity of human glucose-6-phosphate dehydrogenase mutations

More than a hundred naturally occurring mutations of human glucose-6-phosphate dehydrogenase (G6PD) have been identified at the amino acid level. The abundance of distinct mutation sites and their clinical manifestations make this enzyme ideal for structure-function analysis studies. We present here a sequence and structure combined analysis by which the severity of clinical symptoms resulting from point mutations of this enzyme is correlated with quantified degrees of amino acid conservation within 23 G6PD sequences from different organisms. Our analysis verifies, on a quantitative basis, a widely held notion that clinically severer mutations of G6PD usually occur at conserved amino acids. However, marked exceptions to this general trend exist which are most notably revealed by a number of mutations associated with chronic nonspherocytic hemolytic anemia (class I variants). When mapped onto a homology-derived structural model of human G6PD, these class I mutational sites of low amino acid conservation appear to localize in two spatially distinct clusters, both of which are populated with mutations consisting mainly of clinically severer variants (i.e. class I and class II). These results of computer-assisted analyses contribute to a further understanding of the structure-function relationships of human G6PD deficiency.

Detection of methanotrophs in groundwater by PCR

Methanotrophic bacteria have significant potential for bioremediation, which would require methods for monitoring the presence and activity of these organisms in environmental samples. In this study, PCR was used to detect methanotrophic bacteria. Primers were designed on the basis of a partial sequence of pmoA, which encodes one of the proteins of the particulate methane monooxygenase. Specific amplification of a portion of pmoA was obtained with template DNA isolated from lab strains of methanotrophs. A pmoA product was also obtained by using DNA from groundwater. The identity of the PCR product was confirmed by sequencing or by amplification with a nested primer. Reverse transcriptase PCR detected pmoA mRNA.

Biokinetics and dosimetry of titanium tritide particles in the lung

Doses of internal radiation from inhalation of metal tritide aerosols are potentially a major radiation protection problem encountered by nuclear industry workers. Based on results of experiments with rats intratracheally instilled with titanium tritide particles and on a self-absorption factor of beta particles determined by a numerical method, a biokinetic model was developed for inhaled particles of titanium tritide. Results showed that lung burdens of the tritide are well represented by a two-component exponential equation; biological half-lives derived for the retention of 3H in lung were 0.81 d and 66 d. The tritium clearance rate via urine or feces was described by bi-phase exponential components. At 121 d after instillation, 82% of the initial lung burden of 3H had been eliminated, of which 37% was excreted in urine, 29% via feces, and 16% through exhaled air. Based on simulation results of the biokinetic model, the cumulative absorbed dose and committed effective dose were calculated as well as the annual limit of intake (ALI) and derived air concentration (DAC). The ALI and DAC values for titanium tritide were a factor of 5 lower than values for tritiated water. This information will be useful in developing new guidelines for radiation protection purposes.

Fracture toughness of conventional, resin-modified glass-ionomer and composite luting cements

OBJECTIVES

This study was conducted to determine if significant differences existed between the fracture toughness of three types of luting cement, and, if the method of mixing conventional glass-ionomer luting cements, hand-mixed or mechanically mixed, influenced the value obtained.

METHODS

Three types of luting cement were investigated: conventional glass-ionomer cement (two handmixed and two capsulated cements, KetacCem, Fuji I and KetacCem Maxicap, Fuji Cap I), a resin-modified glass-ionomer cement (Vitremer Luting Cement) and a resin composite cement (Scotchbond Resin Cement). Eleven specimens of each of the six cements were fabricated to determine the plane strain fracture toughness using the chevron notch short rod technique. After seven days the specimens were loaded in a water bath, at a crosshead speed of 4 microns/s and the fracture toughness values calculated.

RESULTS

ANOVA indicated significant differences between the cements (p < 0.0001) and each cement was compared with all others using Fishers PSLD test (p < 0.05). The rank order of results from highest fracture toughness value to lowest (mean +/- s.d.) was Scotchbond Resin Cement (1.31 +/- 0.17), Vitremer Luting Cement (1.08 +/- 0.1), Fuji Cap I (0.37 +/- 0.04), KetacCem Maxicap (0.37 +/- 0.05), Fuji I (0.34 +/- 0.04), KetacCem (0.27 +/- 0.03).

SIGNIFICANCE

Of the cements tested, the resin composite cement is most likely to resist clinical failure by cement cohesive failure.

Self-absorption of tritium betas in metal tritide particles

Inhaling metal tritide particles is a potential occupational hazard. The radiation dose to tissue from tritide particles depends on their solubility and retention in the body. In each tritide particle, a portion of the beta particles from decay of tritium is absorbed by the metal matrix and therefore cannot contribute to absorbed radiation dose to tissue. A theoretical model for estimating the self-absorption of tritium betas in spherical metal tritide particles is presented. Numerical calculations are made with this method for titanium, zirconium, and erbium particles from 0.5 to 50 microm in diameter. The tritium spectrum is divided into energy groups to facilitate estimation of the energy that escapes the particle for dose calculations. Our results show considerable absorption of beta particles and their energy, even for respirable particles smaller than 5 microm. Limited experimental data of self-absorption for titanium and zirconium tritides supported the theoretical calculation. It is concluded that the self-absorption factors should be required for counting tritide particle samples as well as for estimating absorbed radiation dose to tissue.

Comparison of the specificity of homo- and heterodimeric linked HIV-1 and HIV-2 proteinase dimers

The specificity of linked homo- and heterodimeric HIV-1 and HIV-2 proteinases was characterized by using oligopeptide substrates. For two substrates the k(cat)/Km values for the heterodimers were the mean values for those of the homodimers, suggesting that these substrates could productively bind into the heterodimers in both directions. However, for two other substrates the k(cat)/Km values for the heterodimers were higher than those of the homodimers, suggesting that these substrates could productively bind into the enzymes in a preferable direction. However, the mode of binding does not seem to depend on the sequential position of the subunits. The studied linked homo- and heterodimers may represent intermediate stages in the evolution of bilobal aspartic proteinases. As divergence in sequence of the two halves of such a proteinase increases, the possibility of bidirectional binding is likely lost at the expense of the optimized side-chain subsite interactions. The differences in observed and calculated k(cat)/Km values revealed dependence of the substrate specificity at one subsite of the enzyme from the next residue in sequence of substrate. These findings were also supported by molecular modeling studies.

Self-assembly of laminin isoforms

The alpha, beta, and gamma subunits of basement membrane laminins can combine into different heterotrimeric molecules with either three full short arms (e.g. laminins-1-4), or molecules containing one (laminins-6-9) or more (laminin-5) short arm truncations. Laminin-1 (alpha1beta1gamma1), self-assembles through a calcium-dependent thermal gelation requiring binding interactions between N-terminal short arm domains, forming a meshwork polymer thought to contribute to basement membrane architecture (Yurchenco, P. D., and Cheng, Y. S. (1993) J. Biol. Chem. 268, 17286-17299). However, it has been unclear whether other isoforms share this property, and if so, which ones. To begin to address this, we evaluated laminin-2 (alpha2beta1gamma1), laminin-4 (alpha2beta2gamma1), laminin-5 (alpha3Abeta3gamma2), and laminin-6 (alpha3Abeta1gamma1). The first two isoforms were found to self-aggregate in a concentration- and temperature-dependent manner and a close self-assembly relationship among laminins-1, -2, and -4 were demonstrated by: (a) polymerization of all three proteins was inhibited by EDTA and laminin-1 short arm fragments, (b) polymerization of laminin-1 was inhibited by fragments of laminins-2 and -4, (c) laminin-2 and, to a lesser degree, laminin-4, even well below their own critical concentration, co-aggregated with laminin-1, evidence for co-polymerization. Laminin-5, on the other hand, neither polymerized nor co-polymerized with laminin-1. Laminin-6 failed to co-aggregate with laminin-1 at all concentrations evaluated, evidence for a lack of a related self-assembly activity. The data support the hypothesis that all three short arms are required for self-assembly and suggest that the short arm domain structure of laminin isoforms affect their architecture-forming properties in basement membranes.

Measurements of airway dimensions and calculation of mass transfer characteristics of the human oral passage

This paper presents measurements of the geometric shape, perimeter, and cross-sectional area of the human oral passage (from oral entrance to midtrachea) and relates them through dimensionless parameters to the depositional mass transfer of ultrafine particles. Studies were performed in two identical replicate oral passage models, one of which was cut orthogonal to the airflow direction into 3 mm elements for measurement, the other used intact for experimental measurements of ultrafine aerosol deposition. Dimensional data were combined with deposition measurements in two sections of the oral passage (the horizontal oral cavity and the vertical laryngeal-tracheal airway) to calculate the dimensionless mass transfer Sherwood number (Sh). Mass transfer theory suggests that Sh should be expressible as a function of the Reynolds number (Re) and the Schmidt number (Sc). For inhalation and exhalation through the oral cavity (O-C), an empirical relationship was obtained for flow rates from 7.5-30.0 1 min-1: Sh = 15.3 Re0.812 Sc-0.986 An empirical relationship was likewise obtained for the laryngeal-tracheal (L-T) region over the same range of flow rates: Sh = 25.9 Re0.861 Sc-1.37 These relationships were compared to heat transfer in the human upper airways through the well-known analogy between heat and mass transfer. The Reynolds number dependence for both the O-C and L-T relationships was in good agreement with that for heat transfer. The mass transfer coefficients were compared to extrathoracic uptake of gases and vapors and showed similar flow rate dependence. For gases and vapors that conform to the zero concentration boundary condition, the empirical relationships are applicable when diffusion coefficients are taken into consideration.

Dissolution of metal tritides in a simulated lung fluid

Metal tritides including titanium tritide (Ti 3Hx) and erbium tritide (Er 3Hx) have been used as components of neutron generators. The current understanding of metal tritides and their radiation dosimetry for internal exposure is very limited, and the ICRP Publication 30 does not provide for tritium dosimetry in metal tritide form. However, a few papers in the literature suggest that the solubility of metal tritides could be low. The current radiation protection guidelines for metal tritide particles are based on the assumption that their biological behavior is similar to tritiated water, which could be easily absorbed into body fluid. Therefore, these particles could have relatively short biological half-lives (10 d). If the solubility is low, the biological half-life of metal tritide particles and the dosimetry of an inhalation exposure to these particles could be quite different from tritiated water. This paper describes experiments on the dissolution rate of titanium tritide particles in a simulated lung fluid. Titanium tritide particles with mean sizes of 103 microm (coarse) and 0.95 microm (fine) were used. The results showed that the coarse particles dissolved much more slowly than the fine particles. The long-term dissolution half times were 361 and 33 d for the coarse and fine particles, respectively. Dissolution data of the fine particles were consistent with the diffusion theory. The dissolution half times were longer than the 10-d biological half time for tritiated water in the body. This finding has significant implications for the current health protection guidelines, including annual limits of intakes and derived air concentrations.

Transcription and processing of the gene for spinach chloroplast threonine tRNA in a homologous in vitro system

An in vitro system was established to study the transcription and processing of threonine tRNA using spinach chloroplast enzyme extract. Experiments using a series of 5' deletion mutants demonstrated that the transcription of trnT gene required no 5' upstream promoter elements. Four plasmid DNA templates containing trnT were constructed for tRNA processing assay. The processing reaction was carried out either with exogenously added precursor-tRNAs made by T7 RNA polymerase or with RNAs synthesized by the transcription activity in the same processing enzyme extract. Both assays demonstrated that the 5' and 3' ends of mature tRNA were processed endonucleolytically and the processing of the 5' end preceded the maturation of the 3' end. The activity of nucleotidyl transferase that adds CCA nucleotides to the 3' end of tRNA was also observed. The use of a coupled transcription and processing system provides us with a better insight to the tRNA processing mechanism of the chloroplast.

An experimental method for measuring aerosol deposition efficiency in the human oral airway

An experimental technique was developed to measure the oral deposition of aerosols by successively drawing them passively through (1) the nasal and oral passage in series, and (2) the nose and an oral bypass "extension tube" inserted into the oral cavity just anterior to the uvula. To test this technique, a replicate human upper airway cast was challenged with monodisperse aerosols ranging in diameter from 3.6 to 150.0 nm at constant flow rates ranging from 7.5 to 30 L/min. For the inhalation study, test aerosols were drawn into the nasal cavity and directed either through the laryngeal-tracheal (L-T) section or the oral passage with/without the oral extension tube. The flow was reversed for the exhalation study. Deposition fractions of aerosols in the main oral cavity were found approximately equal to those in the L-T section for both inhalation and exhalation. Following this phase of the study, experimental measurements of total particle deposition fraction for the oral inlet-tracheal outlet path were performed. The results of these measurements agreed well with the calculated oral deposition fractions based on the initial measurements. This technique has application for measuring oral deposition of larger particles encountered in occupational environments.

Activity of tethered human immunodeficiency virus 1 protease containing mutations in the flap region of one subunit

The tethered-dimer protease of human immunodeficiency virus 1 (HIV-1) [Cheng Y.-S. E., Yin, F.H., Foundling, S., Blomstrom, D. & Kettner, C. A. (1990) Proc. Natl Acad. Sci. USA 87, 9660-9664] and its mutants containing amino acid substitutions or deletions or both in only one flap region were expressed in Escherichia coli. These mutant enzymes showed various degrees of self-processing and significantly reduced catalytic activity toward oligopeptide substrates compared with the wild type. Kinetic parameters determined for one of the oligopeptide substrates showed a dramatic increase in K(m) and decrease in Kcat values. Unexpectedly, the substrate cleavage was more efficient in low salt concentration for a mutant containing a shortened hydrophilic flap. Assays with oligopeptides representing naturally occurring cleavage sites or oligopeptides containing single amino acid substitutions at the P2 and P2' substrate positions showed only moderate changes in the substrate specificity of the mutant proteases. Predicted structures for the mutants were constructed by molecular modeling and used to interpret the results of kinetic measurements. In general, the data suggest that the mutated part of the flaps does not have a major role in determining substrate specificity; rather, it provides the hydrophobic environment and hydrogen-bond interactions with the conserved water that are necessary for efficient substrate binding and catalysis.

Temporal coherence requirement in a symmetric-path grating interferometer

The depth of fringes is obtained for a polychromatic point source at an arbitrary incidence angle. The path difference, calculated by ray tracing, at the plane where the interference fringes vanish indicates that the temporal coherence length is the same as that in other interferometers. It is also found that the equivalent path difference, introduced by relative phase modulation on two interfering rays by two gratings, is as important as the actual path-length difference but in the opposite sign.

Properties of gypsum with the addition of gum arabic and calcium hydroxide

The purpose of this work was to study the effects of adding a mixture of gum arabic and calcium hydroxide to a type III stone and an improved die stone. The effect on the water/powder ratio, compressive and tensile strength, hardness, and setting expansion was determined. Data for mechanical properties were subjected to two-way analysis of variance, followed by the Bonferroni-Dunn procedure to determine any significance (1%) between pairs of means. For the type III material the additives had little effect on setting expansion, but the additives significantly improved surface hardness. The additives did not improve compressive or tensile strength for the type III materials. In contrast, the improved die stone's hardness was not enhanced by the additives, and in some instances a reduction in strength was observed. It was concluded that dental cast materials with superior surface properties can be produced by a simple change of formulation.

Activity of linked HIV-1 proteinase dimers containing mutations in the active site region

Mutations were introduced into the active site triplet (Asp-Thr-Gly) of one or both subunits of a linked dimer of human immunodeficiency virus type 1 proteinase. Mutation of Thr to Ser in one or both subunits did not alter the activity of the enzyme substantially, whereas its mutation to Asn in one subunit caused a dramatic decrease in catalytic efficiency. Mutation of Gly to Val in one subunit also yielded an enzyme with very low activity. The enzymes containing Thr-->Asn and Gly-->Val mutations in both subunits resulted in inactive enzymes, based on their inability to self-process and on assay with an oligopeptide substrate. The dramatic decrease in enzyme efficiency of the mutants was interpreted using molecular models of the enzymes.