Surgical management of iliac wing fractures: Proposal of a new classification system

INTRODUCTION

Isolated fractures of the iliac wing are a rare injury, usually occurring in high-energy trauma, and are associated with other non-musculoskeletal and soft tissue injuries that could compromise the patient's life. Surgical indications are unclear, and there is limited information on the most frequent fracture patterns.

METHODS

A descriptive multicenter case series study of isolated fractures of the iliac wing treated surgically in three referral trauma hospitals in Latin America. The different fracture patterns are described, the "iliac ring" concept is proposed, and a classification is made.

RESULTS

Twenty-eight patients were included; 24 were male, the median age was 31 years RIQ (24-46), the most frequent trauma mechanism was a traffic accident, and in 14 patients, the ISS >16. The most frequent associated injury was to the appendicular skeleton at another level in 13 patients. In the new classification, according to the number of fragments, 11 patients were classified as type A (1 fragment), ten patients as type B (two fragments), and seven patients as type C (three or more fragments). The most compromised anatomical area was the crest and anterosuperior iliac spines in 26 patients, followed by the fossa and anteroinferior iliac spine in 17 and 8 patients, respectively.

DISCUSSION

The patterns of isolated fractures of the iliac wing allow the identification of three types of fractures. Identifying these patterns can help the surgeon decide to perform surgery in these scenarios and choose the fixation technique according to the number and location of the fragments.

Infection after intramedullary nailing of femoral and tibial diaphyseal fractures

PURPOSE

Management of fracture-related infection (FRI) after intramedullary fixation (IF) is a challenge. The aim of the present study is to describe a series of 26 patients with FRI after IF and to evaluate factors possibly related to the outcome.

METHODS

Baseline variables were obtained at the time of IF: age, sex, body mass index, affected bone, open fracture, substance abuse, use of an external fixator, type of nail, reaming, soft-tissue reconstruction and surveillance culture result. After diagnosis of the infection, information was obtained about the time interval between IF and diagnosis and classification according to both the Willeneger and Roth and Makridis systems. Treatment modalities were grouped and analysed according to: use of antimicrobials, surgical debridement, nail removal or retention and spacer use. Cultures of bone or deep soft tissues were performed. Patients were followed up for 12 months, and outcomes (remission, relapse, death and loss of follow-up) were evaluated, as well as fracture consolidation.

RESULTS

Remission was observed in 42.3% of patients. There was no significant association between any baseline variable and outcome. There was a significant association between Makridis stage 2 classification and recurrence or death. Treatment strategy was not significantly associated with outcome, and 65.4% of cases had positive culture results, with Enterobacter cloacae as the predominant agent. Consolidation was observed in 81.8% of patients and was not significantly related to the outcome.

CONCLUSION

There was a significant association between Makridis classification and the outcome. Consolidation rate was not associated with the outcome regarding the treatment of the infection.

Principles of management of hand fractures

The optimal management of hand fractures requires a multidisciplinary approach. Initial assessment should include a thorough medical history and clinical examination, followed by appropriate radiological imaging. These are crucial in determining the appropriate management. Following joint stabilisation to allow fractures to unite, early mobilisation is needed to maximise the functional restoration of the hand. In this review, the principles of operative and non-operative management of these injuries are discussed.

Using shape-memory alloy staples to treat comminuted manubrium sterni fractures: A case report

BACKGROUND

Comminuted manubrium sterni fractures are rare, and internal fixation methods are limited. This report explored a practical and feasible method of internal fixation for comminuted manubrium sterni fractures.

CASE SUMMARY

A 17-year-old female was injured in a car accident for which she underwent debridement and suturing of her head and anterior chest wounds in another hospital. Eight days later, the patient was transferred to our hospital for surgical treatment. The manubrium sterni was found intraoperatively to be split into three irregular fragments with obvious overlap and separation displacement. Meanwhile, a manubriosternal joint dislocation and left first rib cartilage fracture were observed. The retraction force of the shape-memory alloy staples was used to pull the fracture fragments together. Two more titanium locking plates were then used to fix the manubrium sterni and corpus sterni longitudinally, and the left first rib cartilage fracture was repositioned and fixed with a titanium locking plate. A postoperative computed tomography scan showed reduced and rigid fixation of the comminuted manubrium sterni fractures. The patient recovered well with no significant complaints of discomfort. The patient was discharged 10 days postoperatively after the stitches had been removed.

CONCLUSION

Shape-memory alloy staples had the advantage of being safe and effective during the repositioning and internal fixation of comminuted manubrium sterni fractures. Therefore, they provided a new surgical option for comminuted manubrium sterni fractures.

A comparative study on the clinical efficacy of microplate trans-carpometacarpal joint fixation and non-trans-carpometacarpal joint fixation in treating fractures with dislocation or subluxation of the base of the fourth and fifth metacarpal bones

BACKGROUND

This study aimed to compare the clinical efficacy of microplate trans-carpometacarpal joint fixation and non-trans-carpometacarpal joint fixation in treating fractures and dislocation or subluxation of the base of the fourth and fifth metacarpal bones.

METHOD

From 2015 to 2021, 100 cases of metacarpal basal fractures with dislocation or subluxation were randomly divided into the trans-carpometacarpal joint fixation group (group A) and non-trans-carpometacarpal joint fixation group (group B). Group A (n = 50) comprised 44 males and 6 females, with an average age of 28.8 ± 6.1 y and an Orthopedic Trauma Association (OTA) fracture classification of type B1 (n = 29) or C1 (n = 21). Group B (n = 50) comprised 45 males and 5 females, with an average age of 28.9 ± 5.7 y and an OTA fracture classification of type B1 (n = 28) or C1 (n = 22). All patients were complicated with dislocation or subluxation. The surgery time, fracture healing time, postoperative handgrip strength, and total active motion (TAM) scores of the ring and little fingers were recorded and compared between the two groups. The clinical efficacy of patients was evaluated using scoring methods such as DASH (disabilities of the arm, shoulder and hand), visual analogue scale (VAS), and Mayo at 3, 6, and 12 months after surgery.

RESULTS

There was no significant difference in the general indexes, surgery time, or fracture healing time between the two groups (P > 0.05). There were no significant differences in handgrip strength and TAM scores of the ring and little fingers between the two groups at 3 and 12 months postoperatively (P > 0.05), but there were significant differences in these indexes 6 months postoperatively (P < 0.05). There were no significant differences in the DASH, VAS, and Mayo scores at 3 and 12 months postoperatively (P > 0.05), but there were significant differences between the two groups in the DASH and Mayo scores (P < 0.05) but not the VAS score (P > 0.05) 6 months postoperatively.

CONCLUSION

In the treatment of fourth and fifth metacarpal basal fractures with dislocation or subluxation, both microplate transarticular fixation and non-transarticular fixation could achieve fracture fixation and healing, and each method had advantages and disadvantages. The clinically appropriate fixation method should be selected according to the experience of the surgeon and the degree and type of fracture and dislocation.

The use of precontoured plates for midshaft clavicle fractures is not always the best course of treatment

Plate fixation has become the preferred approach for treating displaced midshaft clavicle fractures. However, plate fixation of the clavicle presents several unique challenges, including its complex bony architecture and its immediate subcutaneous location. In many cases, we have observed that precontoured implants do not conform to the clavicular anatomy, and many patients complain of postoperative implant-related discomfort. A total of 111 clavicles, both left and right sides, were examined to match two commonly used designs of anatomical pre-contoured superior anterior clavicle plates, with and without lateral extension. The anteroposterior (AP) plane congruence of the plate to the underlying bone, the vertical gap between the bone and plate, and the length of the plate that was off the bone either anteriorly and/or posteriorly at both ends of the clavicle were measured. The scoring system was used to determine the fit of the implant on the clavicle as anatomic, good, or poor. We found that the maximum superior bow of the clavicle was lateral to the midline by 30.75 mm and 30.5 mm on the right and left sides, respectively. The magnitude of the bow was 4.28 mm and 4.46 mm on the right and left sides, respectively. We also found that the plate was a poor fit in 75.86% of cases on the left side and 73.5% of cases on the right side. Manipulating the plates during surgery was very difficult in the AP plane.

Taguchi optimization of 3D printed short carbon fiber polyetherketoneketone (CFR PEKK)

In this study, the Taguchi method was utilized to optimize fused filament fabrication (FFF) additive manufacturing with the goal of maximizing the flexural strength of 3D printed polyaryletherketone specimens. We analyzed 3D printed (3DP) carbon fiber reinforced poly-etherketoneketone (CFR PEKK), 3D printed and pressed (3DP + P) CFR PEKK, and injection molded medical grade polyetheretherketone (PEEK) as a control. Fracture surfaces were analyzed via scanning electron microscopy (SEM). The parameters that were varied in the optimization included nozzle diameter, layer height, print speed, raster angle, and nozzle temperature. We analyzed the flexural strength and flexural modulus determined from 3-point bending (ASTM D790). Using Taguchi optimization, the signal to noise ratio (SNR) was calculated to determine the relationship between the input parameters and flexural strength and to determine optimal print settings. Results were confirmed with analysis of variance (ANOVA). The raster angle and layer height were determined to have the greatest impact on the flexural strength of specimens printed in the FFF process for 3DP CFR PEKK. The optimized printing parameters were found to be 0/90 Raster Angle, 0.25 mm layer height, 0.8 mm Nozzle Diameter, 375 °C nozzle temperature, and 1100 mm/min print speed. The optimized 3DP CFR PEKK test samples had a flexural strength of 111.3 ± 5.3 MPa and a flexural modulus of 3.5 GPa. 3DP + P CFR PEKK samples had a flexural strength of 257.2 ± 17.8 MPa and a flexural modulus of 8.2 GPa. Statistical comparisons between means demonstrated that pressing significantly improves both flexural strength and flexural modulus of 3DP CFR PEKK. The results of this study support the hypothesis that post consolidation of 3DP specimens improves mechanical properties. Post-processing composites via pressing may allow greater design freedom within the 3DP process while improving mechanical properties.

Treatment of Femoral Neck Fractures in the Elderly: A Survey of the Korean Hip Society Surgeons

Purpose

This study examined the methods for treatment of femoral neck fracture (FNF) preferred by members of the Korean Hip Society (KHS) and identified factors that influence decisions regarding the surgical intervention of choice.

Materials and Methods

A total of 97 members of the KHS responded to the 16-question survey which included questions about the mean number of surgeries performed each month for treatment of femoral neck fractures, the cut-off age for deciding between internal fixation and arthroplasty, the implant used most often, usage of cement, and factors influencing each decision.

Results

The mean cut-off age used when deciding between internal fixation and arthroplasty was 64 years old. Hemiarthroplasty (HA) (70%) was the most preferred option for treatment of displaced FNFs in cases where arthroplasty was indicated (total hip arthroplasty [THA] 19% and dual mobility THA 11%). The main reasons for selection of arthroplasty over reduction with internal fixation were age and pre-fracture ambulatory status. Pre-trauma ambulatory status and/or sports activity were the main factors in selection of HA over THA. Cement was used by 33% of responders. Poor bone quality and a broad femoral canal were factors that influenced the usage of cement.

Conclusion

Management of FNFs in the elderly is a major health problem worldwide; thus, remaining alert to current trends in treatment is essential for surgeons. The mean cut-off age used in deciding between internal fixation and arthroplasty was 64 years old. HA is the preferred method for treatment of displaced FNFs for members of the KHS.

Carbon-fibre plates for traumatic and (impending) pathological fracture fixation: Where do we stand? A systematic review

BACKGROUND

Carbon-fibre (CF) plates are increasingly used for fracture fixation. This systematic review evaluated complications associated with CF plate fixation. It also compared outcomes of patients treated with CF plates versus metal plates, aiming to determine if CF plates offered comparable results. The study hypothesized that CF plates display similar complication rates and clinical outcomes as metal plates for fracture fixation.

METHODS

The study adhered to the Preferred Reporting Items for Systematic Reviews and Meta-Analyses guidelines. The following databases were searched from database inception until June 2023: PubMed, MEDLINE, Embase, Web of Science, Cochrane Library, Emcare, Academic Search Premier and Google Scholar. Studies reporting on clinical and radiological outcomes of patients treated with CF plates for traumatic fractures and (impending) pathological fractures were included. Study quality was assessed, and complications were documented as number and percentage per anatomic region.

RESULTS

A total of 27 studies of moderate to very low quality of evidence were included. Of these, 22 studies (800 patients, median follow-up 12 months) focused on traumatic fractures, and 5 studies (102 patients, median follow-up 12 months) on (impending) pathological fractures. A total of 11 studies (497 patients, median follow-up 16 months) compared CF plates with metal plates. Regarding traumatic fractures, the following complications were mostly reported: soft tissue complications (52 out of 391; 13%) for the humerus, structural complications (6 out of 291; 2%) for the distal radius, nonunion and structural complication (1 out of 34; 3%) for the femur, and infection (4 out of 104; 4%) for the ankle. For (impending) pathological fractures, the most frequently reported complications were infections (2 out of 14; 14%) for the humerus and structural complication (6 out of 86; 7%) for the femur/tibia. Comparative studies reported mixed results, although the majority (7 out of 11; 64%) reported no significant differences in clinical or radiological outcomes between patients treated with CF or metal plates.

CONCLUSION

This systematic review did not reveal a concerning number of complications related to CF plate fixation. Comparative studies showed no significant differences between CF plates and metal plates for traumatic fracture fixation. Therefore, CF plates appear to be a viable alternative to metal plates. However, high-quality randomized controlled trials (RCTs) with long-term follow-up are strongly recommended to provide additional evidence supporting the use of CF plates.

LEVEL OF EVIDENCE

III, systematic review.

The surgical outcomes of fixing ipsilateral femoral neck and shaft fractures: single versus double implants fixation

BACKGROUND

Combined ipsilateral femoral neck and shaft fractures are rare and present a challenging management dilemma. This study aims to assess the outcome of concomitant fixation of the ipsilateral femoral neck and shaft fracture using single versus dual surgical implants.

METHODS

A single-center retrospective analysis of patients who underwent fixation of ipsilateral femoral neck and shaft fractures was performed over a 13-year period. Different techniques were employed to fix the complex injury. Both the reduction and the union time were assessed radiographically.

RESULTS

A total of 36 patients with ipsilateral femoral neck and shaft fractures were retrospectively identified and included in the study. Twenty-four patients (66.6%) were managed with a single cephalomedullary nail, while the remaining cases were treated with two devices. All cases were operated on within an average of 3.7 ± 7.1 days. Eight patients (22.2%) developed postoperative complications. The average follow-up period was 7.3 ± 6.8 months. Although there was no statistically significant difference between the two groups, the femoral neck fractures showed shorter union time in patients treated with one implant compared to patients treated with two implants (3.0 ± 2.3 months vs. 4.2 ± 2.6 months). Another observation was that higher percentages of implant removal/failure and malunion/nonunion were seen in patients who had one implant compared to the two implants group (12.5% vs. 8.3%).

CONCLUSION

Early surgical fixation of both fractures is associated with good outcome results. No difference in outcome was observed between both groups.

[Fractures of the talar neck and body : An overview]

Fractures to the talar neck and talar body (central talar fractures) are rare injuries but often result in devastating outcomes. It is therefore important to diagnose these injuries early and provide the best possible treatment. The analysis, classification, and surgical planning of central talar fractures should be based on computed tomography (CT) imaging. In the case of dislocated fractures, surgeons must strive for an anatomic reduction and fixation. The approach routes are based on the fracture morphology and must enable adequate reduction of the fracture. This can often only be achieved by two or more approach routes. The outcome correlates with fracture complexity and the quality of the reduction. Complications such as avascular necrosis and posttraumatic osteoarthritis are common and have a negative effect on the results of the treatment.

Comparison of the ALPS and PHILOS plating systems in proximal humeral fracture fixation - a retrospective study

BACKGROUND

Open reduction and plate osteosynthesis are considered as a successful technique for the treatment of proximal humerus fracture (PHF) despite high complication rates. The objective of our study was to review the clinical outcome and complications of the Anatomic Locking Plate System (ALPS) and compare it to the Proximal Humeral Internal Locking System (PHILOS). Our hypothesis was that ranges of motion (ROM) were superior and complication rates were lower with ALPS.

METHODS

Twenty patients treated with ALPS for PHF were retrospectively compared to 27 patients treated with PHILOS. Union, ROM and complications were clinically and radiologically assessed at 6 weeks, 3, 6, 12 and 18-24 months post-operatively.

RESULTS

Mean age was 52 ± 14 in the ALPS group and 58 ± 13 in the PHILOS group. Last follow-ups were conducted at a mean of 20.6 ± 4.8 months. Mean shoulder abduction was superior with ALPS by 14° (p-value = 0.036), 15° (p-value = 0.049), and 15° (p-value = 0.049) at 3, 6, and 12 months respectively. Mean shoulder external rotation was superior with ALPS by 11° (p-value = 0.032), 15° (p-value = 0.010) and 12° (p-value = 0.016) at 6 weeks, 3 and 6 months respectively. At the end of the follow-up, ROM remained better with ALPS, but not significantly. Complication rates over 21 months reached 20% with ALPS and 48% with PHILOS (p-value = 0.045). Implant removal rates reached 10% with ALPS and 37% with PHILOS (p-value = 0.036). Avascular necrosis was the only cause for hardware removal in the ALPS group.

CONCLUSION

The ALPS group showed better clinical outcomes with faster recovery in abduction and external rotation, although no difference in ROM remained after 21 months. Additionally, the complications rate was lower at last follow up. In our experience, the ALPS plating system is an effective management option in some PHF.

Mechanical study of the application of compression screw nails in the cross-inverted triangular pattern for internal fixation of femoral neck fractures

OBJECTIVE

To design a cross-inverted triangular pattern to insert compression screw nails for the treatment of femoral neck fractures and to compare the biomechanics of inserting compression screw nails in cross-inverted triangular patterns and inverted triangular patterns. I am very sorry that a corresponding author needs to be added to the article. I do not know how to insert it, so I make a note here. Please check the attachment I uploaded.

METHODS

The reasonableness of the model is first analyzed using finite elements. A total of 6 adult human specimens were selected, of which 3 males and 3 females were divided into the A1, B1, and C1 groups and the A2, B2, and C2 groups by the random number table method. The A1 and A2 groups were made into subhead femoral neck fracture models, the B1 and B2 groups were made into trans-neck femoral neck fracture models, and the C1 and C2 groups were made into basal femoral neck fracture models. The right femur of each group had a compression screw nail inserted in the crossed-inverted triangular pattern, and the left femur of each group had a compression screw nail inserted in the inverted triangular pattern. The static compression test was performed by an electronic universal testing machine. The maximum load of the femoral neck and the load of 3.00 mm axial displacement of the femoral head were read according to the pressure-displacement curve drawn in the experiment.

RESULTS

The finite element analysis showed that the cross-inverted triangular hollow threaded nail has better conductivity and more stable fixation than the inverted triangular hollow threaded nail. The maximum load of the femoral neck and the load of 3.00 mm axial displacement of the femoral head of the left femur were greater than those of the right femur in the A1, A2, B1, B2 and C2 groups, while the maximum load of the femoral neck and the load of 3.00 mm axial displacement of the femoral head of the left femur were smaller than those of the right femur in the C1 group. There was no statistically significant difference in the maximum load of the femoral neck or the load of 3.00 mm axial displacement of the femoral head between the A1 and A2 groups, the B1 and B2 groups, or the C1 and C2 groups (P > 0.05). After the K-S test, the maximum load of the femoral neck and the load of 3.00 mm axial displacement of the femoral head were normally distributed (P = 0.20), and the LSD-t test was conducted for the two load data; the difference was not statistically significant (P = 0.235).

CONCLUSION

The effect of compression screw nails in the cross-inverted triangular pattern was the same in males and females, and stability was better in the fixation of subhead and trans-neck femoral neck fractures. However, its stability in fixation of basal femoral neck fracture is worse than that of the inverted triangular pattern. The cross-inverted triangular hollow threaded nail has better conductivity and more stable fixation than the inverted triangular hollow threaded nail.

Utilising 3D-printed ex vivo biomimetics to improve open reduction and internal fixation (ORIF) simulation training for hand fractures

Background

Surgery for hand trauma accounts for a significant proportion of the plastic surgery training curriculum. The aim of this article is to create a standardised simulation training module for hand fracture fixation on open reduction and internal fixation (ORIF) techniques for residents in order to create a standardised hand-training framework that universally hones their skill and prepares them for their first encounter in a clinical setting.

Methods

A step-ladder approach training using three-dimensional (3D)-printed ex vivo hand biomimetics was employed on a cohort of 15 plastic surgery residents (n = 15). Assessment of skills using a score system (global rating scale) was performed in the beginning and the end of the module by hand experts in our unit.

Results

The overall average score of the cohort pre- and post-assessment were 22.08/50 (44.16%) and 41.54/50 (83.08%) respectively. Significant (p < 0.01) difference of improvement of skills was noted on all trainees. All trainees confirmed that the simulated models provided in this module were akin to the patient scenario and noted that it helped them improve their skills with regards to ORIF techniques including improvement of their understanding of the 3D bone topography.

Conclusion

We demonstrate a standardised simulation training framework that employs 3D-printed ex vivo hand biomimetics proven to improve the skills of residents and which paves the way to more universal, standardised and validated training across hand surgery. This is, to our knowledge, the first standardised method of simulated training on such hand-surgical cases.Level of Evidence: Not ratable.

Locked Tension Band Wiring for Mayo IIA Olecranon Fractures: Modified Surgical Technique and Retrospective Comparative Study of Clinical Outcomes and Cost-effectiveness with Locking Plate

Background: Tension band wiring (TBW) has traditionally been used for simple olecranon fractures, but due to its many complications, locking plate (LP) is increasingly being employed. To reduce the complications, we developed a modified technique for olecranon fracture repair, locked TBW (LTBW). The study aimed to compare (1) the frequency of complications and re-operations between LP and LTBW techniques, (2) clinical outcomes and the cost efficacy. Methods: We retrospectively evaluated data of 336 patients who underwent surgical treatment for simple and displaced olecranon fractures (Mayo Type ⅡA) in the hospitals of a trauma research group. We excluded open fractures and polytrauma. We investigated complication and re-operation rates as primary outcomes. As secondary outcomes, Mayo Elbow Performance Index (MEPI) and the total cost, including surgery, outpatients and re-operation, were examined between the two groups. Results: We identified 34 patients in the LP group and 29 patients in the LTBW group. The mean follow-up period was 14.2 ± 3.9 months. The complication rate in the LTBW group was comparable to that in the LP group (10.3% vs. 17.6%; p = 0.49). Re-operation and removal rates were not significantly different between the groups (6.9% vs. 8.8%; p = 1.000 and 41.4% vs. 58.8%; p = 1.00, respectively). Mean MEPI at 3 months was significantly lower in the LTBW group (69.7 vs. 82.6; p < 0.01), but mean MEPI at 6 and 12 months were not significantly different (90.6 vs. 85.2; p = 0.06, 93.9 vs. 95.2; p = 0.51, respectively). The mean cost/patient of the total cost in the LTBW group were significantly lower than those in the LP group ($5,249 vs. $6,138; p < 0.001). Conclusions: This study showed that LTBW achieved clinical outcomes equivalent to those of LP and was significantly more cost effective than LP in the retrospective cohort. Level of Evidence: Level III (Therapeutic).

Correlation between traumatic pelvic ring injuries and sexual dysfunctions: a multicentric retrospective study

PURPOSE

Among the functional impairments associated with pelvic ring injuries (PRI), sexual dysfunction (SD) is a common clinical issue. The aim of this study is to investigate correlations between traumatic PRI, genitourinary, and sexual dysfunctions, for a proper multidisciplinary treatment.

METHODS

We performed an observational, multicentric study, from January 2020 to 2022. We conducted a follow-up after surgery at three, six, 12, and 24 months by measuring the Female Sexual Functioning Index (FSFI), the International Index of Erectile Function (IIEF), the Arizona Sexual Experience Scale (ASEX), the Majeed Score, and the SF-12. Descriptive statistics was conducted on T-test, Whelc's test, and one-way ANOVA which were performed when appropriate.

RESULTS

A total of 76 patients (mean age 42.17 ± 15 years) were included in the study and allocated into three groups (A, B, and C). Tile A group revealed good sexual outcomes, similar to that of healthy patients. Tile B group demonstrated worsen SD than the previous group. In Tile C group, there was a longer average duration of the orthopaedic surgery when compared to group B. However, in terms of SDs, statistical significance could not be demonstrated between groups C and B.

CONCLUSIONS

We observed a progressive spontaneous recovery of sexual function, corresponding to each PRI group. Moreover, men classified as B2 had milder SDs than B1 male patients.

Late deep femoral artery injury after intertrochanteric hip fracture treatment: A case report

INTRODUCTION AND IMPORTANCE

Arterial injury is a rare complication following hip fracture surgery. If not diagnosed appropriately, can lead to life- or limb-threatening situations. This report describes a case of late iatrogenic arterial injury, four weeks following surgery for intertrochanteric fracture.

CASE PRESENTATION

An 89-year-old woman suffered an intertrochanteric fracture. The deep femoral artery was injured four weeks after fracture treatment by dynamic hip screw, following increase of range of motion during the rehabilitation exercises. Pain and swelling increased markedly at the thigh. Slight fever with no tachycardia and the deceptive laboratory tests directed us to late-appearing sepsis. A color Doppler ultrasonography examination did not identify the arterial bleeding. Treatment was carried out to evacuate the presumed pus, but big clots were seen instead, and an active arterial bleeding was discovered. The arterial lesion was sutured and hemodynamic stability was restored.

CLINICAL DISCUSSION

The appearance of injury may be either acute or delayed. Unexplained laboratory results, use of beta-blockers and non-classical symptoms may be obstacles to early diagnosis of arterial injury.

CONCLUSION

A high index of clinical suspicion of arterial injury, even after long period after surgery, should be kept in mind. More precise investigations may be needed, as angiography, for making the diagnosis of arterial injury.

Efficacy comparison of antibiotic bone cement-coated implants and external fixations for treating infected bone defects

PURPOSE

This study aimed to investigate the clinical efficacy of antibiotic bone cement-coated implants compared with external fixations for treating infected bone defects.

METHODS

We retrospectively enrolled 119 patients with infected bone defects in our hospital from January 2010 to June 2021, of which 56 were treated with antibiotic bone cement-coated implants and 63 were with external fixation.

RESULTS

The pre-operative and post-operative haematological indexes were tested to assess the infection control; the post-operative CRP level in the internal fixation group was lower than that in the external fixation group. No statistical significance was found in the rate of infection recurrence, loosening and rupture of the fixation, and amputation between the two groups. Twelve patients in the external fixation group had pin tract infection. In the evaluation of the Paley score scale, bone healing aspect revealed no significant difference between the two groups, while in the limb function aspect, antibiotic cement-coated implant group showed a much better score than the external fixation group (P = 0.002). The anxiety evaluation scale result also showed lower score in the antibiotic cement implant group (P < 0.001).

CONCLUSIONS

Compared with external fixation, antibiotic bone cement-coated implant had the same effect on controlling infection and was more effective in recovering limb function and mental health in the first-stage treatment of infected bone defects after debridement.

Comparison of internal and external fixation after debridement in the Masquelet technique for Cierny-Mader type IV tibial post-traumatic osteomyelitis

OBJECTIVE

To compare the effect of internal fixation vs. external fixation after debridement in stage I of the Masquelet technique for Cierny-Mader (C-M) type Ⅳ chronic post-traumatic tibial osteomyelitis.

METHODS

This retrospective observational study included patients with tibial osteomyelitis who underwent staged treatment with the Masquelet technique between January 2016 and June 2020 at the 920 Hospital of Joint Logistic Support Force of the PLA. The patients were grouped according to the fixation they received after stage I. Infection recurrence, time to radiological bone healing and full weight-bearing, self-rating anxiety scale (SAS) score, Hospital for Special Surgery (HSS) Knee Score, and American Orthopedic Foot and Ankle Society (AOFAS) Ankle-Hindfoot Score were compared.

RESULTS

Sixty-three patients were included (50 males and 13 females). There were 40 and 23 patients with internal and external fixation, respectively. There were no significant differences between the two groups regarding the preoperative and intraoperative data (all P>0.05). After stage I operation, the infection control rates were 85.0% and 82.6% in the internal and external fixation groups (P=0.803), and these rates were 92.5% and 95.7% after stage II (P=0.621). There were no differences in the SAS scores (P=0.278), time to radiological union (P=0.795), time to full weight-bearing (P=0.725), AOFAS scores (P=0.302), HSS scores (P=0.085), and complication rates (P=0.593). There were 27 times complications in 19 patients, with an incidence of 42.9%, without significant differences between groups.

CONCLUSION

There were no differences between the two fixation methods after debridement in stage I of the Masquelet technique for C-M type Ⅳ chronic post-traumatic tibia osteomyelitis.

Elbow to digit measurements as a preoperative adjunct tool to aid intramedullary femoral nail selection - the rule of thumb

BACKGROUND

Intramedullary femoral nails are measured intraoperatively using fluoroscopy. This study aims to investigate whether distance from the olecranon to fingertips can be used to estimate nail length preoperatively by evaluating agreement of the two measurements. Such preoperative measurements may provide a likely range of nails needed for theatre and serve as an adjunct to intraoperative measurements.

METHODS

In 70 patients, long leg radiographs were used to make linear measurements from the piriformis fossa and greater trochanter to the distal physeal scar of the femur. These were compared to measurements from the olecranon to the tip of each digit and Bland-Altman agreement analysis was performed. Train and Trial groups were formed to develop models for estimation and to then test their accuracy.

RESULTS

Bland-Altman analysis revealed a fixed bias, indicative of average difference between measurements, of 1.4 cm when comparing the elbow-thumb length to maximum femoral nail length for piriformis fossa entry and 3.5 cm using greater trochanter entry, informing the "rule of thumb". Elbow-thumb length plus 1.4 cm or 3.5 cm predicts nail length to a range of ± one nail increment. The rule can be used to preoperatively predict a range of three nails from which there is a 94-97% likelihood the appropriate intramedullary nail would be selected.

CONCLUSIONS

The "rule of thumb" may serve as a simple to use tool for preoperative planning and a technical check to assess the "reasonableness" of intraoperative measurements before implantation of the device. It has the potential to reduce operating time and nail wastage.

Risk Factors for Postoperative Complications After Surgical Treatment of Type B and C Injuries of the Thoracolumbar Spine

BACKGROUND

Unstable thoracolumbar spinal injuries benefit from surgical fixation. However, perioperative complications significantly affect outcomes in surgicallytreated spine patients. We evaluated associations between risk factors and postoperative complications in patients surgically treated for thoracolumbar spine fractures.

METHODS

We conducted a retrospective multicenter study collating data from 21 spine centers across 9 countries on the treatment of AOSpine types B and C injuries of the thoracolumbar spine treated via a posterior approach. Comparative analysis was performed between patients with postoperative complications and those without. Univariate and multivariable analyses were performed.

RESULTS

Among 535 patients, at least 1 complication occurred in 43%. The most common surgical complication was surgical-site infection (6.9%), while the most common medical complication was urinary tract infection (13.8%). Among 136 patients with American Spinal Injury Association (ASIA) Impairment Scalelevel A disability, 77.9% experienced at least 1 complication. The rate of complications also rose sharply among patients waiting >3 days for surgery (P<0.001), peaking at 68.4% among patients waiting ≥30 days. On multivariable analysis, significant predictors of complications were surgery at a governmental hospital (odds ratio = 3.38, 95% confidence interval = 1.73-6.60), having ≥1 comorbid illness (2.44, 1.61-3.70), surgery delayed due to health instability (2.56, 1.50-4.37), and ASIA Impairment Scalelevel A (3.36, 1.78-6.35), while absence of impairment (0.39, 0.22-0.71), ASIAlevel E (0.39, 0.22-0.67) and, unexpectedly, delay caused by operating room unavailability (0.60, 0.36-0.99) were protective.

CONCLUSIONS

Types B and C thoracolumbar spine injuries are associated with a high risk of postoperative complications, especially common at governmental hospitals, and among patients with comorbidity, health instability, longer delays to surgery, and worse preoperative neurologic status.

Area of the plateau depression and higher age predict post-operative subsidence in split-depression lateral tibial fracture

INTRODUCTION

The aim of this study was to determine factors that affect post-operative subsidence in split-depression lateral plateau tibial fracture (OTA/AO 41B3.1) which was treated with raft construct through a locking plate.

PATIENTS AND METHODS

The retrospective study evaluated all split-depression lateral plateau tibial fracture cases treated with raft construct through a locking plate between 01/2015 and 04/2020 with a minimum of 12-month follow-up. Data on the patients' age, sex, time from injury to surgery, type of plate, and use of subchondral bone defect filler were retrieved from the hospital database. The measurements of total plateau area (TPA), depressed lateral plateau area (DPA), and maximal plateau depression (MPD) were performed on the patients' pre-operative CT scans. The percentage of DPA to TPA (%DPA) was calculated. Post-operative radiographs were used for the evaluation of plateau subsidence. A subsidence greater than 2 mm was considered a failure.

RESULTS

There were 41 consecutive cases of split-depression lateral plateau tibial fracture in the reviewed period. Five cases were excluded, three of them were lost to follow up, 1 patient had no pre-operative CT scan and 1 had a history of cancer. A failure was identified in 11 (31%) cases. Patients in the failure group were older (61.0 vs 50.7 years, p = 0.01), and had a higher incidence of fractures extending into intercondylar eminence (100% vs 56%, p = 0.02). Multiple logistic regression identified DPA (OR = 3.6; 95%CI 1.4-9.5, p < 0.01) and age (OR = 1.2; 95% CI 1.0-1.4, p = 0.02) as predictive factors for plateau subsidence. DPA cut-off value for predicting subsidence greater than 2 mm was 5.8 cm² [Area Under the ROC Curve 0.89 (95% CI 0.74-0.97), sensitivity 91%, specificity 80%, p < 0.01)].

CONCLUSION

Age and depressed lateral plateau area (DPA) in split-depression lateral plateau tibial fracture treated with raft construct through a locking plate are risk factors for post-operative subsidence greater than 2 mm.

Patient perspective on the use of carbon fibre plates for extremity fracture fixation

INTRODUCTION

Carbon fibre-reinforced polyetheretherketone (CFR-PEEK) plates represent an exciting development within trauma and orthopaedic surgery, offering advantages including radiolucency, material properties similar to bone, and lack of localised tissue reaction. As more call for trials examining their use, there is no data available as to the acceptability of these implants to patients. This study aimed to therefore examine the acceptability of CFR-PEEK plates to patients undergoing fracture surgery.

METHODS

This was a prospective cross-sectional survey of patients undergoing surgery for a fracture of the ankle, distal femur, distal radius, or proximal humerus. Once a decision had been made to pursue operative fixation with a plate, patients were provided with descriptions of both CFR-PEEK and stainless steel and titanium metal implants alongside the current clinical evidence. All patients undertook a questionnaire examining their views as to the advantages and disadvantages of CFR-PEEK plates, and whether they would be happy to participate in a trial comparing both.

RESULTS

Ninety-nine patients were happy to participate (64 females, mean age 50). Eighty-seven patients reported that they would want a CFR-PEEK implant for their fracture, and 76 reported that they would be willing to participate in an RCT comparing their use. Commonly reported advantages included radiolucency, low weight and biocompatibility. Disadvantages reported included cost and concerns regarding durability.

CONCLUSIONS

This study demonstrates that CFR-PEEK implants would be acceptable to patients undergoing fracture surgery, with high numbers of patients stating that they would be willing to participate in a randomised study examining their use.

Robotic guidance for percutaneous placement of triangular osteosynthesis in vertically unstable sacrum fractures: a single-center retrospective study

BACKGROUND

To evaluate the effectiveness and safety of robot-aided percutaneous triangular osteosynthesis combined with close reduction for vertically unstable sacrum fractures (VUSFs).

METHODS

The data on 21 patients of the VUSF were retrospectively analyzed from November 2016 to January 2021. According to Denis classification, there were 3 cases in zone I, 11 cases in zone II, and 7 case in zone III. The main perioperative indicators were recorded. The maximal angulation and displacement deviations of the screws were analyzed by comparing the planned trajectory with the actual position. Postoperative X-ray radiographs and CT scans were obtained for evaluating the reduction quality. Functional outcome was scored with Majeed criterion.

RESULTS

Fourteen patients of the unilateral VUSF and 7 patients of the bilateral VUSF underwent unilateral and bilateral triangular osteosynthesis with robotic assistance, respectively. No intraoperative neurovascular injuries and postoperative infection occurred. All patients were followed up for at least 12 months. The average operation time of posterior pelvic ring was 111.4 min, with the mean intraoperative bleeding of 110.5 ml. A total of 58 pedicle and iliosacral screws were implanted with robotic assistance. Of those, 52 screws were in the cancellous bone except 4 pedicle and 2 iliosacral screws cutting the cortical bone. The angulation and displacement deviations of the screws were 4.2° ± 2.5° and 1.7 ± 0.9 mm, respectively. The average displacement of the sacral fracture was reduced from 19.7 mm preoperatively to 3.1 mm postoperatively. According to Matta's criterion, the reduction quality was graded as "excellent" in 13 patients and "good" in 8. All sacral fractures healed within 6 months except one fracture with nonunion. The mean Majeed score at the last follow-up was 89.6.

CONCLUSIONS

Robot-aided triangular osteosynthesis combined with close reduction provide a safe and reliable option for percutaneous treatment of the fresh VUSF, with a high accuracy of iliosacral and pedicle screw implantation except insertion of iliac screws. Meanwhile, the technique may help to reduce incision-related complications.

Cephalomedullary Nailing has a Higher Reoperation Rate Compared to Sliding Hip Screw Fixation in the Treatment of Intertrochanteric Femur Fractures: A Systematic Literature Review and Meta-analysis

Objectives

Intertrochanteric hip fractures are a common orthopaedic injury in the United States. Complications of surgical treatment include nonunion, lag screw cutout, implant failure, post-operative pain, risk of refracture or reoperation, and infection. The purpose of this study was to compare the rate of complications of sliding hip screw fixation (SHS) compared to cephalomedullary nailing (CMN) for the treatment of closed intertrochanteric femur fractures in adult patients.

Methods

PubMed, CINAHL, and Cochrane Library databases were searched for studies comparing SHS to CMN in the treatment of closed intertrochanteric femur fractures in adults. Data were compiled to observe the rate of nonunion, cutout failure, infection, refracture, perioperative blood loss, reoperation, postoperative pain, pulmonary embolism/deep venous thrombosis (DVT), length of hospital stay, and mortality.

Results

Seventeen studies were included comprising 1,500 patients treated with SHS and 1,890 patients treated with CMN. Treatment of intertrochanteric femur fractures with SHS demonstrated significantly fewer refractures and reoperations. There was no significant difference in other variables between SHS and CMN treated groups.

Conclusion

This meta-analysis shows that the only notable difference in outcomes is patients treated with CMN have a higher rate of refracture and reoperation. With new advances in the development of both CMNs and SHS, further studies will be required to see if these differences persist in the coming years.