A Rare Case of Hyoid Bone Fracture Concomitant with a Comminuted Mandibular Fracture

The hyoid bone fracture secondary to trauma other than strangulation is a rare event, regarding the literature. Hereby, we presented a rare and interesting case of hyoid bone fracture associated with comminuted mandibular fracture following falling-down in a 13-year-old girl. The importance of timely diagnosis and proper treatment plan would be discussed, as well. The maxillofacial surgeon should be aware of the possibility of a hyoid bone fracture in patients who have suffered maxillofacial trauma. Potentially fatal respiratory complications can develop rapidly unless proper care is given to such injuries.

Relationship between mandible fractures and third molars

Background

This study was conducted to determine the relationship between third molar (M3) and mandibular fracture.

Methods

Patients with unilateral mandibular angle or condyle fractures between 2008 and 2018 were evaluated retrospectively. Medical records were reviewed regarding the location of fractures, and panoramic radiographs were reviewed to discern the presence and position of ipsilateral mandibular third molars (M3). We measured the bony area of the mandibular angle (area A) and the bony area occupied by the M3 (area B) to calculate the true mandibular angle bony area ratio (area A–B/area A× 100).

Results

The study consisted of 129 patients, of which 60 (46.5%) had angle fractures and 69 (53.5%) had condyle fractures. The risk of angle fracture was higher in the presence of M3 (odds ratio [OR], 2.2; p< 0.05) and the risk of condyle fracture was lower in the presence of M3 (OR, 0.45; p< 0.05), than in the absence of M3. The risk of angle fracture was higher in the presence of an impacted M3 (OR, 0.3; p< 0.001) and the risk of condyle fracture was lower in the presence of an impacted M3 (OR, 3.32; p< 0.001), than in the presence of a fully erupted M3. True mandibular angle bony area ratio was significantly lower in the angle fractures than in the condyle fractures (p= 0.003).

Conclusion

Angle fractures had significantly lower true mandibular angle bony area ratios than condyle fractures. True mandibular angle bony area ratio, a simple and inexpensive method, could be an option to predict the mandibular fracture patterns.

Twenty-four years of experience in management of complex mandibular fractures with low cost, custom-made mandibular external fixation: A 65-patient series

INTRODUCTION

Ginestet introduced the first external device used to fix the mandible in 1936. In 1949, Morris introduced a biphasic fixation device. This "Joe Hall Morris fixation" design led to use of a self-crafted external fixator based on pins connected by a breathing tube filled with dental resin. The objective of this study was to present our surgical results with this device through a 65-patient series.

METHODS

This retrospective study included all the patients who benefited from the self-crafted mandibular external fixator at our Oral and Maxillofacial department from 1995 to 2019. Sixty-five patients were allocated into two groups. There were 39 patients in the temporary stabilisation (TS) group and 26 in the bone healing (BH) group. Functional criteria were investigated, including mouth opening limitations and occlusal abnormalities. Aesthetic evaluation focused on skin healing, evaluated by both surgeon and patient.

RESULTS

Twenty-three patients exhibited spontaneous bone healing during their immobilisation period and two patients developed a pseudoarthrosis in the BH group. Most TS group patients benefited from secondary management by bone graft, bone free flap, or distraction osteogenesis. Few complications were noted with our technique during the study period.

CONCLUSION

Our self-crafted external fixation with Joe Hall Morris fixation style is a valuable option for external stabilisation of the lower third of the face.

Optimizing mandibular sagittal split of large maxillomandibular advancements for obstructive sleep apnea: patient and surgical factors

OBJECTIVES

Maxillomandibular advancement (MMA) confers consistent and high rates of surgical success for obstructive sleep apnea (OSA). In the era of value-based medicine, identifying factors that affect the stability of rigid fixation and allow rapid return to function are important targets for improvement. The aim of this study was to identify patient and surgical factors associated with mandibular sagittal split outcomes associated with optimal postoperatively skeletal stability.

STUDY DESIGN

Retrospective cohort study.

MATERIALS AND METHODS

Forty-six subjects (43 males and 3 females) with postoperative CT scans including three-dimensional reconstruction from which mandibular split patterns could be analyzed were enrolled. Patient factors (age and polysomnographic measures) and surgical factors (extent of osteotomy prior to controlled fracture) were assessed. Outcome measures include (1) bone thickness for rigid fixation and (2) area of passive bony overlap after advancement.

RESULTS

Age and severity of disease did not contribute significantly to optimal mandibular split patterns. For optimal area for passive bony overlap and thickness of buccal and lingual plates for rigid fixation, the most important factors are related to surgical technique.

CONCLUSIONS

Anterior osteotomy just to the midline of inferior border and horizontal osteotomy to the mandibular foramen are associated with split patterns that result in optimal rigid fixation and passive bony overlap for OSA patients undergoing MMA.

CLINICAL RELEVANCE

Optimal surgical technique has the most significant influence in allowing rapid return to function after MMA in patients with OSA.

Vertically unstable fractured mandibular segment with attached genial tubercles as a parameter for difficulty during intubation for general anaesthesia-substantiation with computed tomographic (CT) scan evidence

PURPOSE

To study and evaluate the anatomic alterations in the suprahyoid musculature, the hyoid bone, and the laryngeal inlet in patients with vertically unstable fractured mandibular segment with attached genial tubercles using computer tomography for substantiation of the clinical evidence and hypothesis of difficulty during intubation for general anaesthesia.

MATERIALS AND METHOD

Random sampling methodology was used to enrol patients with mandibular bilateral parasymphysis fracture qualifying for the classification of vertically unstable fractured mandibular segment with attached genial tubercles for group A patients. Patients with unilateral parasymphysis fracture with vertically stable mandibular segment were included in group B. Forty patients with parasymphysis fracture and no other associated facial fracture/injury were evaluated prospectively by comparing their pre-operative computer tomography (CT) images with post-operative CT images taken after the reduction of the fracture. Parameters evaluated were variation in the radiologic anatomy of the laryngeal inlet shape and alteration in the suprahyoid musculature after open reduction and internal fixation of the fracture when compared with pre-operative CT images.

RESULTS

The following were the results/observations from this study among group A patients: (1) The distance between the genial tubercles and the hyoid was found to be reduced. (2) Dorsal bodily movement of the hyoid was observed suggesting loss of anterior hyoid support. (3) The posttraumatic changes in the shape of the laryngeal inlet were observed in cases with vertically unstable bilateral parasymphysis fracture. (4) Restoration of morphology of the laryngeal inlet and anterior-posterior distance between genium and hyoid after reduction.

CONCLUSION

Computer tomographic findings confirm that the displacement of fractured mandible and resultant displacement of the genial musculature have their effect on the laryngeal morphology. These posttraumatic changes in cases with dorsally displaced vertically unstable fractured mandibular segment with attached genial tubercles should be considered as a vital parameter for assessing difficulty during intubation.

Accuracy and outcome of mandibular fracture reduction without and with an aid of a repositioning forceps

Purpose

It is presumed that adequate reduction of a fracture of the mandible favors bone healing and diminishes the risk of complications. In this retrospective study, we compared the accuracy of fracture alignment and complication rate of mandibular fractures reduced without or with aid of a repositioning forceps.

Methods

Retrospective analysis of consecutive 252 patients with mandibular fractures treated between January 2010 and December 2016. Eligible for this study were patients with isolated mandibular fractures needing open reduction and internal fixation in whom pre- and postoperative radiographs and patient records were available. In total, 131 (252 fractures) patients fulfilled the inclusion criteria.

Results

Seventy-one (54%) patients were men. Mean age of the patients was 33 ± 16.5 years, and the median and interquartile range of age was 25 (20;41). In 54 patients, mandibular fractures were reduced without the aid of repositioning forceps, and in the remaining 77 patients, the fractures were reduced with the aid of the repositioning forceps. Anatomical alignment of the fractures was poor in the non-forceps-aided group (48%) compared to the forceps-aided group (58%) (P = .067). Overall complication rate was higher in the group of fractures reduced without the aid of forceps (17%) than in the forceps-aided group (7%) (P = .045; OR, 2.7; 95% CI, 1.0–7.4).

Conclusions

Mandibular fractures reduced with the aid of repositioning forceps are accompanied by a lower complication rate and better alignment. This is an important observation as better alignment of the fracture fragments favors bone healing and reduces complications.

Postoperative CT of the Mandible Following Trauma: Review of Normal Appearances and Common Complications

RATIONALE AND OBJECTIVES

Surgeons aim to restore occlusion and jaw function to baseline status for patients with mandibular fractures using either closed treatment or reduction and fixation.

MATERIALS AND METHODS

Occlusion is defined as the relationship between the maxillary and mandibular teeth as they approach each other.

RESULTS

Radiologists should be familiar with the goals of repair to help identify which treatment is adequate as well as to diagnose potential complications. Some of the more common complications encountered are infection, nonunion or malunion, and malocclusion.

CONCLUSION

We provide a comprehensive review of both the desired and untoward CT findings after surgical repair of traumatic mandibular injuries.

Effect of pulsed electromagnetic field on mandibular fracture healing: A randomized control trial, (RCT)

INTRODUCTION

Currently, the pulsed electromagnetic field (PEMF) method is utilized for the treatment of nonunion long bone fractures. Considering the established effect of the PEMF on the acceleration of the bone healing process, we conducted this study to evaluate the effect of PEMF on the healing process in mandibular bone fractures.

MATERIAL AND METHODS

This research was a randomized control trial (RCT) study. The sample consisted of patients with a mandibular fracture who were hospitalized in order to receive closed reduction treatment. The participants were randomly selected and then sequentially divided into two groups of 16 participants each (controls = 16, cases = 16). The patients in the control group received conventional therapy without any extra treatment, while the patients in the case group received PEMF therapy in addition to conventional therapy. For the PEMF therapy, patients in the case group received immediate post-surgery PEMF therapy for 6 h. Next, they received 3 h of exposure for the next 6 d, and finally, the same process was repeated for 1.5 h for post-surgery days 8-13. The maxillomandibular fixation (MMF) device was removed at post-surgery week 4. The patients in the control group, however, did not receive any extra treatment. The efficiency of the treatment modalities was evaluated clinically and radiographically. For the radiographical assessment, we employed a direct digital panoramic machine to calculate the computerized density of the bone, and those measurements were used for comparison of the results between the control group and the study patients.

RESULTS

There was no significant difference in the mean bone density values between the two groups (P > 0.05). However, the percentage of changes in bone density of the two groups revealed that the case group had insignificant decreases at post-surgery day 14 and a significant increase at post-surgery day 28 compared with the control group (P < 0.05). After releasing the MMF, a bimanual mobility test of the fractured segments showed the stability of the segments in all patients. In the case group, the mouth opening was significantly more stable than that of the control group (P < 0.05).

CONCLUSION

PEMF therapy postoperatively leads to increased bone density, faster recovery, increased formation of new bone, a further opening of the mouth, and decreased pain.

A 4-Year Multicentre Audit of Complications Following ORIF Treatment of Mandibular Fractures

Purpose

To ascertain the complications arising from open reduction and internal fixation of mandibular fractures and to elucidate if different osteosynthesis plating systems vary in treatment outcome.

Materials and Methods

This is a retrospective study. Parameters such as patient data, injury details, osteosynthesis implant system information, stability of fracture fragments, occlusion and complications were evaluated at different time intervals and logistic regression applied to determine the association of these factors with complications.

Results

Five hundred and ninety-three patients with mandibular fractures were included in this study (male 87.9% and female 12.1%), age range of 13-72 years (median = 22 years). Most fractures were caused by motor vehicle accidents (85.8%), assault (6.2%) and falls (4.7%). Parasymphyseal fractures were the most common (50.1%), followed by angle (35.2%) and body of mandible (25%). Median time interval between injury and intervention was 7 days (IQR 4-10). Median duration of follow-up from date of surgery was 72 days (IQR 30-230). 76.9% (456) were completely free of complications. Most complications (46%) occurred in the intermediate post-surgical period (1-6 weeks). Median interval period between surgery and complication was 15 days (IQR 7-67.5). Nerve injury and surgical site infection were the most common complications at 6.7% and 5.7%, respectively. There was a significant difference between the plating system in terms of complication outcome (p = 0.017).

Conclusion

Whilst the miniplate dimensions may be similar across different manufacturers, the complication outcome may differ between systems.

Effectiveness of placement of second miniplates as tension band unit in mandibular parasymphysis fractures

BACKGROUND

The ideal position of the plates and the need for additional plates are discussed continuously. In mandible, the tensile forces at the fracture line should be neutralized with a tension band. This study evaluated the role of the mandibular arch bar as a tension band eliminating the need for an upper miniplate (tension band plate) in cases of parasymphysis fractures.

MATERIALS AND METHODS

In this randomized control trial, a total of 90 patients with mandibular parasymphysis fractures underwent treatment in two groups. Group A was treated with one titanium miniplate along with Erich's arch bar. In Group B, two titanium miniplates were placed across the fracture site along with Erich's arch bar. Then, the complications and duration of the operation time were compared between two groups. The results were considered statistically significant when the P < 0.05.

RESULTS

No significant difference was observed between the groups regarding postoperative complication rate. 1 month after surgery in Group A, number of patients with sensory impairment (17%) was significantly lower than Group B (37%) (P = 0.029). Furthermore, the operation time of Group A was significantly shorter than Group B (P < 0.001).

CONCLUSION

In the presence of arch bar, placing one miniplate instead of the routine technique of placing two, do not increase complication rates. Furthermore, it reduces the operation time and costs and results in a better neurosensory recovery outcome in short time.

Mandibular subcondylar fracture accessibility with transparotid approach by rhytidectomy and modified Risdon approach: An anatomical comparative study

PURPOSE

The purpose of our anatomical study was to compare the accessibility of the area at the level of the neck of the condyle and the condylar head by two different approaches: the modified Risdon approach and a transparotid approach by rhytidectomy (TPAR).

METHODS

An anatomical study was performed on 12 heads of cadavers preserved with a solution rich in glycerin and ethanol, but very low in formalin. A modified Risdon approach and a TPAR were each performed on a hemiface of the same head. The bone surface was rendered digitally accessible on an anatomical diagram using Image J software. The software was used to determine a concordance score between the area of accessibility and the area of interest necessary for osteosynthesis of a high subcondylar fracture. This score was presented as a numerical scale from 0 to 100. We measured the total number of pixels in our area of interest and assigned it a score of 100. We then compared the area of accessibility with the area of interest necessary for osteosynthesis of a high subcondylar fracture.

RESULTS

Using the modified Risdon approach, an average score of 55.88 (SD = 18.96) was found, or 55.88% of the accessible area of interest. Using TPAR, we found a score of 91.05 (SD = 7.95) or 91.05% of the accessible area of interest. This difference in score between the two techniques was significantly different (p < 0.001), taking into account intra-hemiface and intra-individual correlation.

CONCLUSION

TPAR seems to be more effective in treating high condylar process fractures of the mandible.

Morbidity of Teeth in Mandibular Fracture Lines - A Retrospective Study

BACKGROUND/AIM

Teeth in mandibular fracture lines is common in maxillofacial trauma, but their retention or extraction is a matter of controversy. The aim of this study was to determine the factors related to retaining or extracting teeth situated in mandibular fracture lines and to decide the best treatment option.

METHODS

The study included 115 patients with a single mandibular fracture that had a tooth in the line of fracture. All patients were evaluated for complications and pulp status. Patient distribution was analyzed according to the complications that occurred. Statistical analysis was performed using SPSS 13.0 software.

RESULTS

There were significant effects of tooth type and tooth location on the occurrence of complications. There were no significant differences in the occurrence of complications between the retained teeth group and the extracted teeth group irrespective of age and gender in adult patients. There were significant differences in treatment procedures between the retained teeth group and the extracted teeth group.

CONCLUSION

Mandibular anterior teeth involved in the fracture line should be retained, while in the mandibular angle area, they should be extracted because retaining teeth in this region increases the prediction of complications. There is no role of pulp testing in the assessment of pulp status, but root canal treatment of retained teeth helps to reduce the occurrence of complications. This article is protected by copyright. All rights reserved.

[Facial symmetry after conservative treatment of unilateral condylar fracture in children: a three-dimensional study]

Objective: To investigate the influence of condylar fractures on the growth of condylars after conservative treatments by three-dimensional measurement. Methods: Twenty three children with unilateral condylar fracture followed-up for at least 1 year in Shanghai Ninth People's Hospital were included from June 2016 to March 2017. CT scans were performed for each patient. Three-dimensional virtual skulls were reconstructed and measuring points were defined with Simplant 11.04 software. The depth of glenoid fossa, height of articular eminence, width, height and depth of condylar, deviation of pogonion were measured. Statistical analyses were conducted to assess difference between the bifid group and the normal group. Results: No difference was observed in the vertical position of crest of the articular eminence between two groups (P=0.110). The vertical position of roof of the glenoid fossa in bifid side was significantly superior than the one in normal side (P=0.010). Bifid side had a shorter (P=0.002) and wider(P=0.002) condylar than normal side did. No difference was observed in the depth of condylar between two groups (P=0.071). The average deviation of pogonion was (0.69±1.75) mm (P=0.072) from sagittal plan. Conclusions: This short-termed study indicates that children's growth potential of condylar is under average after conservative treatments. Because the bone hyperosteogeny of glenoid fossa compensates the hypotrophy of condylar, no deviation of pogonion is detected.

Arrested root growth and concomitant failure of eruption of a developing tooth following open reduction and internal fixation of a pediatric mandibular fracture

Mandible is one of the commonly fractured bone in children during maxillofacial trauma. These factures are usually managed conservatively but sometimes require open reduction and internal fixation (ORIF). Management of mandibular fracture in children is influenced by the presence of developing permanent tooth buds, minimal anchorage from primary teeth and facial growth and development. Although, there have been technical and material advancements with ORIF, it is still associated with complications related to growth and damage to developing teeth. This case report describes a case of mandibular parasymphyseal fracture managed successfully with open reduction and internal fixation using a miniplate and a consequent cessation of root growth and eruption failure of a mandibular canine present in the fixation area.

Minimal Incision Approach for Condyle Fracture Treatment

Introduction

Surgical treatment of condylar neck fractures requires an extraoral approach when, due to the degree of difficulty of the fracture, an intraoral approach or an endoscopically supported treatment is not possible. In contrast to the cosmetically more favorable oral approach, extraoral approaches offer a better overview of the operating field and thus an easier fracture repositioning and osteosynthetic treatment. In 2007, Marti et al. described a minimal pre- and retroauricular incision with no extension to the hair-bearing skin and which aimed to improve the parotidectomy approach.

Materials and Methods

We present two cases in which minimal incision was used as a surgical approach for treatment of the condylar neck.

Discussion

Using the minimal incision, we were able to access the condylar neck. This type of approach as well as having the advantages of an open approach makes it possible to conceal the scar in the periauricular region and reduce the likelihood of salivary fistula.

FAMI Screws for Mandibulo-Maxillary fixation in mandibular fracture treatment - Clinico-radiological evaluation

Mandibulo-maxillary fixation (MMF) is indispensable for mandibular fracture treatment. Various means for MMF have been proposed, of which arch bars are widely considered to be the mainstay. However, disadvantages to this method have initiated a quest for an alternative, leading to the introduction of MMF screws. MMF screws have frequently been criticized for poor stability of fracture sites, root damage, hardware failure, and nerve damage. We retrospectively evaluate the FAMI (Fixation and Adaptation in Mandibular Injuries) screw in mandibular fracture treatment by scanning for clinically and radiologically visible complications. In total, 534 FAMI screws were used in the successful treatment of 96 males and 34 females. Condylar fractures were most commonly encountered, representing 120 of 241 fracture sites. 15 general fracture-related complications occurred, with the most common being nerve function impairment (3.8%) and postoperative malocclusion (4.6%). In nine cases (7%), clinically visible FAMI-screw-related complications occurred, with the most prevalent being screw loosening (2.3%) and mucosal signs of inflammation (3.1%). Duration of FAMI screws was associated with the occurrence of clinically visible complications (p = 0.042). Radiologically, clinically invisible dental hard tissue damage was noted in 21 individuals (16%). Therefore, FAMI screws seem to be a reliable and safe method for mandibulo-maxillary fixation.

Bite Force as a Parameter for Comparison Between Three-Dimensional and Standard Titanium Miniplates for the Management of Anterior Mandibular Fractures: A Prospective Randomized Double-Blinded Clinical Trial

Background and Objectives

To compare the efficacy of three-dimensional (3D) miniplates with standard miniplates in the osteosynthesis of anterior mandibular fractures on the basis of bite force recordings and other clinical parameters.

Methods

A prospective randomized double-blinded clinical trial was carried out for the treatment of anterior mandibular fractures. In total, 20 patients were randomly divided into two groups of 2-mm 3D and standard titanium miniplates. The assessment of patients was done at weekly intervals for 6 weeks using bite force recordings and other clinical parameters.

Results

A statistically significant difference was found in the duration of surgery which was less in group A as compared to group B (p = 0.03). No significant difference was found in other clinical parameters.

Interpretation and Conclusion

The clinical outcome of both the 3D and standard miniplate systems in the present study was similar; however, the following advantages with the use of 3D miniplates can be highlighted:Relatively lesser operating time.Three-dimensional stability of the fracture site and simultaneous stabilization at superior and inferior borders in the fixation of mandibular fractures.

Prevalence of mandibular fracture in patients visiting a tertiary dental care hospital in North India

Background:

Injuries of the maxillofacial complex represent one of the most important health problems worldwide. At present, in developing India, due to poor traffic sense, maxillofacial trauma and fractures are most epidemiologic diseases. Mandible is the largest and strongest facial bone and it is the second most commonly fractured bone. Mandibular fractures can involve only one site or can often involve multiple anatomic sites simultaneously.

Aims:

The present study is aimed to know the age- and sex-related prevalence of parasymphyseal fracture, fracture of angle, condylar fracture, symphyseal fracture, and coronoid fracture of mandible in North Indian population. It also evaluates the correlation of prevalence of parasymphyseal fracture, angle of mandible, condylar fracture of mandible, symphyseal fracture of mandible, and coronoid fracture of mandible.

Materials and Methods:

All patients fulfilling the selection criteria and having mandible fracture were selected for the study. The data about mandibular fracture was collected by means of a structured questionnaire including age, sex, and anatomic site of fracture. Qualitative variables were compared using Chi-square test/Fisher's exact test as appropriate.

Results:

The study population consists of 1015 individuals aged between 7 and 68 years with the mean age of 33.49 ± 11.79 years. The most common anatomic site for mandibular fracture was parasymphyseal region (40.3%) followed by angle (28.8%), condyle (27.6%), and symphysis (12.5%) of mandible. The coronoid process of mandible (44, 4.3%) was least involved in mandibular fracture. Males (30.8%) are more predilected for condylar fracture than females (15.7%). The mandibular symphyseal fracture is more common in male (14.9%) than female (3.7%).

Conclusion:

Mandibular fractures occur in people of all ages and races, in a wide range of social settings. Their causes often reflect shifts in trauma patterns over time. The present assessments of mandibular fracture will be valuable to government agencies and health-care professionals involved in planning future programs of prevention and treatment.

The use of cerclage wire for surgical repair of unilateral rostral mandibular fracture in horses

Fractures of the rostral mandible in horses are the most common type of jaw fractures. The present study was performed for stabilization of rostral mandibular fracture with cerclage wire. In a retrospective case series, six client-owned horses with unilateral mandibular fractures were admitted to our clinic and suffered from a major gingival wound at rostral part of mandible. Rostral mandibular fracture was diagnosed through clinical examination and radiography. Fractured region was repaired by cerclage wire under the effect of general anesthesia and wires were maintained for 6-12 weeks. The repair of mandibular fracture by cerclage wiring exhibited good fracture reduction and fixation in five horses and fair results in one horse. After twelve weeks, the fracture healing was excellent practically and cosmetically. Furthermore, the horses appeared normal without any evidence of teeth-related mastication problems, obstinate fracture-site fistula, or extreme callus formation. Radiographically, cerclage wire achieved good fracture fixation and fracture gap closure. Moreover, the formation of uniting callus was noticed at 6-12 weeks post-operatively. It was concluded that, unilateral mandibular fracture in horses can successfully be repaired by interdental wiring (IDW). All horses were returned to their usual activities without any fracture healing-related masticatory problems at the time of follow-up.

Evaluation of mandibular fracture healing in rats under zoledronate therapy: A histologic study

INTRODUCTION

To evaluate fracture healing in mandible of rats under zoledronate therapy.

METHODS

A total of 135 Wistar rats were randomly allocated into 3 groups. Group L received two intravenous infusion of 0.06 mg/kg zoledronate 6 weeks apart. Group H received the same dose of zoledronate as group L once a week for 6 weeks and group C were treated with normal saline. Seven days after the last infusion, rats underwent unilateral mandibular osteotomy to replicate a fracture. Fifteen rats from each group were sacrificed 2, 4, and 6 weeks after surgery. Fracture calluses were examined and scored using a histological grading system (1 to 10).

RESULTS

After 2 weeks, substantial woven bone and some lamellar bone were seen in control and L groups. In group H, healing was delayed and consisted of fibrous and cartilaginous tissue and some woven bone. After 4 weeks, most of woven bone in control group was replaced with lamellar bone but in group L, comparatively less bone remodeling occurred. In group H, healing process was nearly the same as that at 2 weeks. After 6 weeks, complete bone remodeling was seen in control group. In group L, bone remodeling was under way and in group H, histological findings were nearly the same as those at 2 and 4 weeks. Except for L and control groups at 2 weeks, healing score was significantly different between all corresponding groups.

CONCLUSION

Zoledronate therapy delayed healing process of mandibular fracture in rats in a dose-dependent manner.

The use of Synthes MatrixWAVE bone anchored arch bars for closed treatment of multiple concurrent mandibular fractures

Background

Maxillomandibular fixation (MMF) is an important tool in the treatment of facial fractures and bone-anchored arch bar systems have emerged as treatment options. This study illustrates our experience with the Synthes MatrixWAVE MMF system and the novel application in closed treatment of patients with multiple concurrent mandibular fractures.

Methods

We enrolled eight patients with concurrent mandibular fractures and treated them with the MatrixWAVE MMF system. The malleable arch bars were fitted and then secured using 6-8 mm screws. The arch bar was and either stretched or compressed to ensure optimal positioning. 24-gauge interdental fixation wiring was placed using the fish loop technique on either side of the fracture to achieve stabilization of the mandible fractures.

Results

All eight patients were retained in MMF until stable occlusion was achieved with clinical evidence of healing, approximately 4-6 weeks. Post-operative Panorex scans did not reveal any evidence of damage to tooth roots. None of the screws became overly embedded in the mucosa secondary to overgrowth; the arch bars were successfully removed in an outpatient setting without local anesthesia.

Conclusions

The Synthes MatrixWAVE MMF system has unique features such as prominent screw anchor heads and horizontal malleability unique from other bone anchored arch bars. These features allow for completely closed treatment of patients with multiple concurrent mandible fractures.

A comparative study between traditional fixation with miniplates and modified lag screws for the treatment of mandibular fractures

OBJECTIVES

The objective of this study is to investigate two internal fixation surgical techniques for mandibular fractures in order to compare modified lag screw techniques with standard miniplates.

MATERIALS AND METHODS

This is an observational prospective study. Three hundred eighteen patients were operated on for mandibular fractures. The patients were divided into two groups according to the type of surgical technique used: modified lag screws (155 patients) and traditional miniplates (163 patients). Analyses were made of sociodemographic and preoperative variables, the parameters related to the fracture type and postoperative data.

RESULTS

There were no differences between the two groups regarding their sociodemographic characteristics. The modified lag screws were primarily used with double fractures, while conventional miniplates were more often used with simple fractures. The number of complications was higher with the miniplate technique. The unfavorable fractures had an OR of 5.75 due to postoperative complications; double fractures had an OR of 8.87 and simple fractures an OR of 19.53, which, in both cases, were lower with conventional miniplates than with modified lag screws.

CONCLUSION

Modified lag screws provide a rigid fixation system that is as secure as miniplates, but with greater compression between the fragments, less postsurgical gap, faster ossification, and fewer postoperative complications.

CLINICAL RELEVANCE

The modified screw technique is a safe tool that does not require any specific osteosynthesis materials not found in a basic traumatology kit and has a lower cost, due to the reduced amount of material used.

Comparison of 3D plate and locking plate in treatment of mandibular fracture-a clinical study

INTRODUCTION

This study was performed to evaluate the efficacy and post-operative complication of 3-dimensional (3D) titanium miniplate and locking plate in mandibular fractures (parasymphysis, symphysis, body, and angle).

MATERIALS AND METHODS

Forty patients, with non-comminuted mandibular fractures treated with open reduction and internal fixation using 3D titanium miniplate system or locking plate system through an intra-oral approach, were included in this study. All patients were systematically monitored up to 2 months post-operatively. Parameters recorded were infection, occlusal discrepancies, hardware failure, wound dehiscence, sensory disturbance of the inferior alveolar nerve, and stability of fractured segments.

RESULTS

Forty patients with mandibular fracture were divided into two groups randomly without any bias. The fractures of all 40 patients were found to be adequately fixed when checked intra-operatively after fixation. One patient (2.5%) of the 3D plate group developed an infection on the first and second post-operative visit and was treated by antibiotic coverage. One patient in the locking plate group (2.5%) reported wound dehiscence after the first week follow-up.

CONCLUSION

Both 3D titanium miniplates and locking plate are effective in the treatment of mandibular fractures, and overall complication rates are lesser. However, the 3D plating system uses less hardware in cases of parasymphysis and symphysis fractures and more hardware in cases of body and angle fractures.

Imaging in traumatic mandibular fractures

A fracture of the mandible is a common trauma presentation amongst young males and represents one of the most frequently encountered fractured bones within the viscerocranium. Historically, assault was the dominant contributing factor but now due to the increased number of vehicles used per capita, motor vehicle accidents are the primary cause. Mandibular fractures can be classified anatomically, by dentition, by muscle group and by severity. The fracture may also be closed, open, comminuted, displaced or pathological. It is important that the imaging modality used identifies the classification as this will decide definitive treatment. X-ray projections have typically been used to detect a mandibular fracture, but are limited to an anteroposterior (AP), lateral and oblique view in an unstable trauma patient. These views are inadequate to detail the level of fracture displacement and show poor detail of the condylar region. Computer tomography (CT) is the imaging modality of choice when assessing a traumatic mandibular injury and can demonstrate a 100% sensitivity in detecting a fracture. This is through use of a multidetector-row CT, which reduces motion blur and therefore produces accurate coronal and sagittal reconstructions. Furthermore, reconstructive three-dimensional CT images gained from planar views, allows a better understanding of the spatial relationship of the fracture with other anatomical landmarks. This ensures a better appreciation of the severity and classification of a mandibular fracture, which therefore influences operative planning. Ultrasound is another useful modality in detecting a mandibular fracture when the patient is too unstable to be transferred to a CT scanner. The sensitivity however is less in comparison to a CT series of images and provides limited detail on the fracture pattern. Magnetic resonance imaging demonstrates use in assessing soft tissue injury of the temporomandibular joint but this is unlikely to be of priority when initially assessing a trauma patient.

Maxillofacial and Mandibular Fractures in Sports

Sports account for 3% to 29% of facial injuries and 10% to 42% of facial fractures. Fractures of the facial skeleton most commonly occur owing to interpersonal violence or motor vehicle crashes. Facial fractures from sporting activities has clearly decreased over time owing to better preventive measures. However, this decreasing trend is offset by the emergence of more dangerous sports activities, or "pushing the envelope" of traditional sports activities. Fractures can occur from contact between athletes, and between athletes and their surroundings. Football, soccer, hockey, and baseball most frequently are involved in sports-related cases of facial bone fracture.