Pharmacokinetics and lung-targeting characterization of a newly formulated enrofloxacin preparation

A new lung-targeting and controlled releasing preparation, enrofloxacin microsphere, was formulated and its physical properties, stability, pharmacokinetics and lung-targeting characteristics were tested in this study. The enrofloxacin microsphere prepared was demonstrated round and regular, which was easy to be dispersed and stable in both light stability test and heat stability test. Following intravenous administration of a single dose in dog, the drug concentration-time data in the lung were fitted most suitably with three-compartment open model. Compared with enrofloxacin injection (Baytril, half-life of distribution phase in the lung was shortened from 0.72 to 0.16 h, half-life of elimination phase in the lung was prolonged from 5.15 to 33.86 h and clearance of drug concentration in the lung was decreased from 0.603 to 0.267 L/h/kg. Lung-targeting parameters, including the relative intake rate (Re), targeting efficacy (Te) and the ratio of peak concentration (Ce), were calculated according to the pharmacokinetic parameters. The results showed that Re (2.48) and Ce (4.27) of the lung was much greater than that of other tissues and the ratio of Te(microsphere) to Te(Baytril) increased by a factor of 1.77 (compared with liver) to 3.51 (compared with spleen). Therefore, the enrofloxacin microsphere prepared in this study had controlled releasing and lung-targeting effects in dog.

Guanine tetrad and palindromic sequence play critical roles in the RNA dimerization of bovine foamy virus

Retroviruses are unique in having a diploid genome. However, the RNA sequences and structures that link the two RNA molecules are different. To identify the dimer linkage site of bovine foamy virus (BFV), complementary DNAs were used to interfere with RNA dimerization of BFV. We found that two sites, designated SI and SII, within a 53-base RNA fragment, were essential for BFV dimerization in vitro. SI consists of a potential guanine tetrad (GGGGC), which overlaps the primer binding site, while SII contains 15 nucleotides including a palindromic sequence, UCCCUAGGGA. Masking either of the sites completely abolished RNA dimer formation. Furthermore, a deletion of SII was introduced into a BFV infectious DNA clone; we found that deletion of SII significantly increased expression of BFV transactivator Borf-1. Interestingly, we also found that this deletion abolished viral infectivity. These results suggest that dimerization might play a unique role in the BFV life cycle.

Solid-phase low temperature steam-assisted synthesis of thermal stable alumina nanowires

A simple steam-assisted solid phase synthesis method was developed for synthesis of boehmite nanowires in the presence of TEAOH surfactant. The boehmite nanowires had uniform diameters (12-16 nm) and length up to 1-2 microm. The morphology of the nanostructured wires was well preserved after being converted to pure gamma-Al2O3 by thermal treatment at 600 degrees C for 5 h. The nanowires of Al2O3 exhibited excellent thermal stability by retarding the phase transformation and maintaining the wires-like nanostructure after being aged up to 1300 degrees C by preventing sintering between particles at high temperatures. The surface areas of Al2O3 nanowires could be maintained as high as 68 m2/g at 1300 degrees C while the surface areas of Al2O3 micropowder shrank to 0.89 m2/g after same thermal treatment. Both in-situ XRD and 27Al NMR results indicated that the crystal structure of gamma-Al2O3 nanowires was not transformed to alpha-Al2O3 at 1300 degrees C whereas micropowder Al2O3 was fully converted to alpha-Al2O3 at 1100 degrees C.

The coordination of protein motors and the kinetic behavior of microtubule — A computational study

Utilizing the mechanical energy converted from chemical energy through hydrolysis of ATP, motor proteins drive cytoskeleton filaments to move in various biological systems. Recent technological advance has shown the potential of the motor proteins for powering future nano-bio-mechanical systems. In order to effectively use motor proteins as a biological motor, the interaction between the protein motors and bio-filaments needs to be well clarified, since such interaction is largely influenced by many factors, such as the coordination among the motors, their dynamic behavior, physical properties of microtubules, and the viscosity of solution involved, etc. In this study, a two-dimensional model was proposed to simulate the motion of a microtubule driven by protein motors based on a dissipative particle dynamics (DPD) method with attempt to correlate the microtubule's kinetic behavior to the coordination among protein motors.

The epitope study of alpha-fodrin autoantibody in primary Sjögren's syndrome

Alpha-fodrin, an intracellular organ-specific cytoskeleton protein, was identified recently as an autoantigen associated with Sicca- and Sjögren's syndrome (SS). Identification of the antigenic determinants of alpha-fodrin is a prerequisite to developing highly sensitive and specific anti-alpha-fodrin antibodies, which provides potential means for the diagnosis of primary Sjögren's syndrome (pSS) in patients. Based on the structure and predicted antigenic sites of alpha-fodrin protein with 560 amino acids (alpha-fodrin 560), we prepared a set of overlapping recombinant protein fragments covering antigenic epitopes and synthesized a set of peptides derived from the alpha-fodrin protein. These recombinant proteins and synthesized peptides were subjected to screening with pSS patients sera, respectively. The peptide with the strongest immunoreactivity was used as antigenic peptide to define further the role of anti-alpha-fodrin-peptide antibodies in the sera of 135 patients with pSS, 48 patients with systemic lupus erythematosus (SLE), 88 patients with rheumatoid arthritis (RA) and 83 normal controls. Our data showed that the N-terminal peptide of amino acids 46-59 (N46) of alpha-fodrin 560 was the epitope with strongest antigenicity. The prevalences of anti-N46 peptide antibodies (alpha-N46PA) in patients with pSS, SLE, RA and normal controls were 78.5%, 10.4%, 21.6% and 6.0%, respectively. The sensitivity and specificity of the autoantibodies in pSS were 78.5% and 86.8%, respectively. These results suggest the alpha-N46PA which shows highest sensitivity and specificity is of significance to develop an effective diagnostic approach for pSS.

Results of semimonthly 5-florouracil/leucovorin combined with paclitaxel and oxaliplatin in treatment of advanced gastric cancer (AGC)

15045

Background: At present there is still no standard chemotherapy regimen for AGC, the progress of AGC exhibits a pessimistic result with a median survival of less than 9 months. The purpose of this trial was designed to enhance the treatment efficacy for AGC by using semimonthly FU/LV combined with paclitaxel and oxaliplatin. Methods: Patients chosen with histologically proven diagnosis of adenocarcinoma of the stomach or gastroesophageal junction, locally advanced (i.e., unresectable) or metastatic and measurable disease. The chemotherapy regimen was comprised of a 3-hour infusion of 135 mg/m2 of paclitaxel followed by oxaliplatin 85 mg/m2 and LV 400 mg/m2, administered simultaneously as a 2-hour infusion, then continued a 46-hour infusion of FU 2.4 g/m2 using an ambulatory pump. Treatment was continued until disease progressed, unacceptable toxicity, or patient choice. The primary endpoint was response rate. Results: Twenty-seven patients were enrolled onto this study in our center between September 19, 2005 and December 25, 2006. The median patient age was 51 years (range, 28 to 66 years), 21 were males and 6 were females. All patients received the chemotherapy between at least two cycles and maximum eight cycles with a median of three. Four CRs of 27 enrolled patients, fifteen PRs and eight SDs were observed. Nineteen patients were chemonaive within enrolled patients: Four CRs, eleven PRs. At a median follow-up of 8.7 months, the median survival was 6.8 months. Frequent grade 3 to 4 toxicities were: neutropenia (37.0%), stomatitis (7.4%), nausea (7.4%), vomiting (7.4%), hepatic dysfunction (3.7%), paresthesia (18.5%). No treatment-related death occurred. Conclusion: Semimonthly FU/LV combined with paclitaxel and oxaliplatin appears to be of well efficacy and is well tolerated in patients with AGC. Currently, this regimen is being tested in the phase III trial involving patients with AGC on the basis of well result.

No significant financial relationships to disclose.

Quantitative analysis of defects and domain boundaries in mesoporous SBA-16 films

Some quantitative structural analyses on defects and domain boundaries observed in SBA-16 films were performed using the lattice concept and geometric phase method. These analyses show that there exist low angle, high angle and translational anti-phase domain boundaries in SBA-16 films. While some of the domain boundaries bear analogue to those found in normal solid crystals, others are similar to that found in the liquid crystals. In particular near Sigma11 and Sigma13b high angle boundaries were observed. On the one hand the Sigma11 boundaries were found to exist with or without steps (ledge) associated with them depending on whether or not the boundary plane is parallel to the densely packed lattice plane. On the other hand segments of the boundary plane in the Sigma13b boundary were found being always associated with densely packed lattice plane, with the {011} type of lattice plane in one domain being parallel to the {112} type of plane in the other domain. The translational domain boundary was observed to have a translation vector having a projected component of (1/2) <110> on the (111) plane. The bending deformation similar to that found in the nematics liquid crystal was also observed and quantitatively analyzed using the geometric phase method, and rotational field associated with the deformation was identified.

Identification of contaminant sources in enclosed environments by inverse CFD modeling

In case contaminants are found in enclosed environments such as aircraft cabins or buildings, it is useful to find the contaminant sources. One method to locate contaminant sources is by inverse computational fluid dynamics (CFD) modeling. As the inverse CFD modeling is ill posed, this paper has proposed to solve a quasi-reversibility (QR) equation for contaminant transport. The equation improves the numerical stability by replacing the second-order diffusion term with a fourth-order stabilization term in the governing equation of contaminant transport. In addition, a numerical scheme for solving the QR equation in unstructured meshes has been developed. This paper demonstrates how to use the inverse CFD model with the QR equation and numerical scheme to identify gaseous contaminant sources in a two-dimensional aircraft cabin and in a three-dimensional office. The inverse CFD model could identify the contaminant source locations but not very accurate contaminant source strength because of the dispersive property of the QR equation. The results also show that this method works better for convection dominant flows than the flows that convection is not so important.

PRACTICAL IMPLICATIONS

This paper presents a methodology that can be used to find contaminant source locations and strengths in enclosed environments with the data of airflow and contaminants measured by sensors. The method can be a very useful tool to find where, what, and how contamination has happened. The results can be used to develop appropriate measures to protect occupants in the enclosed environments from infectious diseases or terrorist releases of chemical/biological warfare agents as well as to decontaminate the environments.

Electron field emission characteristics and field evaporation of a single carbon nanotube

Direct transmission electron microscope (TEM) observations of the field emission and evaporation process of emitting carbon nanotubes (CNTs) shown that the tip structure of the CNT is in general composed of irregular shaped graphitic sheets which extend typically more than 10 nm from the end of the CNT. It is found that the irregular shaped graphitic sheets at the tip of the CNT may greatly enhance the field emission characteristics of the CNT when compared with that having an ideal circular edge. The field evaporation of the CNT proceeds typically via the removal of the irregular shaped graphitic sheets from the tip of the CNT, and field emission characteristics of a CNT depend far more sensitively on the tip structure than on the geometric length of the CNT.