Spin polarization induced by in-plane electric and magnetic fields in two-dimensional heavy-hole systems

Using a nonequilibrium Green function approach, we systematically investigate the current induced spin polarization (CISP) in a two-dimensional heavy-hole system with cubic Rashba spin-orbit coupling, driven by in-plane electric and magnetic fields. We find that when a magnetic field is applied along the direction of electric field, the longitudinal conductivity drops monotonously with an increase of magnetic-field strength or of hole density. The spin polarization along the electric-field direction is just the Pauli paramagnetism and it quadratically increases with an increase of hole density. The nonvanishing out-of-plane component of spin polarization emerges for both short-range and long-range disorders, and it changes sign with the variation of magnetic field, especially for long-range hole-impurity scattering. In the magnetic-field dependences of this out-of-plane CISP and of the in-plane CISP perpendicular to the electric field, there are singular magnetic fields, below or above which the effects of magnetic field are completely different.

Assessment of continuum mechanics models in predicting buckling strains of single-walled carbon nanotubes

This paper presents an assessment of continuum mechanics (beam and cylindrical shell) models in the prediction of critical buckling strains of axially loaded single-walled carbon nanotubes (SWCNTs). Molecular dynamics (MD) simulation results for SWCNTs with various aspect (length-to-diameter) ratios and diameters will be used as the reference solutions for this assessment exercise. From MD simulations, two distinct buckling modes are observed, i.e. the shell-type buckling mode, when the aspect ratios are small, and the beam-type mode, when the aspect ratios are large. For moderate aspect ratios, the SWCNTs buckle in a mixed beam-shell mode. Therefore one chooses either the beam or the shell model depending on the aspect ratio of the carbon nanotubes (CNTs). It will be shown herein that for SWCNTs with long aspect ratios, the local Euler beam results are comparable to MD simulation results carried out at room temperature. However, when the SWCNTs have moderate aspect ratios, it is necessary to use the more refined nonlocal beam theory or the Timoshenko beam model for a better prediction of the critical strain. For short SWCNTs with large diameters, the nonlocal shell model with the appropriate small length scale parameter can provide critical strains that are in good agreement with MD results. However, for short SWCNTs with small diameters, more work has to be done to refine the nonlocal cylindrical shell model for better prediction of critical strains.

A standard panel of microsatellites for Asian seabass (Lates calcarifer)

Microsatellites are the most popular markers for parentage assignment and population genetic studies. To meet the demand for international comparability for genetic studies of Asian seabass, a standard panel of 28 microsatellites has been selected and characterized using the DNA of 24 individuals from Thailand, Malaysia, Indonesia and Australia. The average allele number of these markers was 10.82 +/- 0.71 (range: 6-19), and the expected heterozygosity averaged 0.76 +/- 0.02 (range: 0.63-1.00). All microsatellites showed Mendelian inheritance. In addition, eight standard size controls have been developed by cloning a set of microsatellite alleles into a pGEM-T vector to calibrate allele sizes determined by different laboratories, and are available upon request. Seven multiplex PCRs, each amplifying 3-5 markers, were optimized to accurately and rapidly genotype microsatellites. Parentage assignment using 10 microsatellites in two crosses (10 x 10 and 20 x 20) demonstrated a high power of these markers for revealing parent-sibling connections. This standard set of microsatellites will standardize genetic diversity studies of Asian seabass, and the multiplex PCR sets will facilitate parentage assignment.

Uncertainty Calculation for Spectral-Responsivity Measurements

This paper discusses a procedure for measuring the absolute spectral responsivity of optical-fiber power meters and computation of the calibration uncertainty. The procedure reconciles measurement results associated with a monochromator-based measurement system with those obtained with laser sources coupled with optical fiber. Relative expanded uncertainties based on the methods from the Guide to the Expression of Uncertainty in Measurement and from Supplement 1 to the "Guide to the Expression of Uncertainty in Measurement"-Propagation of Distributions using a Monte Carlo Method are derived and compared. An example is used to illustrate the procedures and calculation of uncertainties.

Nonlinear dc transport in graphene

Considering electron-impurity, electron-acoustic-phonon and electron-optical-phonon scatterings, the nonlinear steady-state transport properties of graphene are studied theoretically by means of the balance equation approach. We find that the conductivity as a function of electric field strength, E, exhibits strongly nonlinear behavior for E larger than a critical value, E(c)≈0.1 kV cm(-1). With the increase of E from zero, the conductivity first decreases slowly and then it falls rapidly when E>E(c). The dependence of electron temperature on E is also demonstrated.

Buckling of carbon nanotubes at high temperatures

Presented herein is an investigation into the buckling behavior of single-walled carbon nanotubes (SWCNT) subjected to axial compression and torsion at high temperatures. This study is carried out by performing molecular dynamics (MD) simulations at both room temperature and extremely high temperatures. It is observed that the SWCNT becomes more susceptible to buckling in a higher temperature environment, especially when the SWCNT is subject to axial compression. The high thermal energy enhances the vibration of carbon atoms in the SWCNT significantly, which leads to bond breaking and the formation of sp(3) bonds as well as Stone-Wales (SW) defects in the postbuckling stage.

Nonlinear bending and stretching of a circular graphene sheet under a central point load

Understanding of the bending and stretching properties of graphene is crucial in guiding its growth and applications. In this paper, we investigate the deformation of a single layer, circular, graphene sheet under a central point load by carrying out molecular mechanics (MM) simulations. The bending and stretching of the graphene sheet are characterized by using the von Kármán plate theory. Stress concentrations near the loaded region and the boundary due to bending rigidity of the graphene sheet are highlighted. It is shown herein that, with properly selected parameters, the von Kármán plate theory can provide a remarkably accurate prediction of the graphene sheet behavior under linear and nonlinear bending and stretching.

Synthesis of carboxylated chitosan and its adsorption properties for cadmium (II), lead (II) and copper (II) from aqueous solutions

Carboxylated chitosan (CKCTS) was prepared for the removal of Cd(II), Pb(II), and Cu(II) from aqueous solutions. The effects of experimental parameters such as pH value, initial concentration, contact time and temperature on the adsorption were studied. From the results we can see that the adsorption capacities of Cd(II), Pb(II), and Cu(II) increase with increasing pH of the solution. The kinetic rates were best fitted to the pseudo-second-order model. The adsorption equilibrium data were fitted well with the Langmuir isotherm, which revealed that the maximum adsorption capacities for monolayer saturation of Cd(II), Pb(II), and Cu(II) were 0.555, 0.733 and 0.827 mmol/g, respectively. The adsorption was an exothermic process.

Loop-mediated isothermal amplification for rapid detection of acute viral necrobiotic virus in scallop Chlamys farreri

Loop-mediated isothermal amplification (LAMP) assay for rapid and sensitive detection of Acute viral necrobiotic virus (AVNV) in scallop Chlamys farreri was developed and evaluated. Four primers recognizing six targets on distinct AVNV DNA sequences were designed and the LAMP reaction was carried out in a water bath. Reaction temperature and time were optimized at 64 degrees C for 60 mins and LAMP products were detected using agarose gel electrophoresis and visual assessment. Confirmation of the expected LAMP products was performed with MboI restriction enzyme analysis. The detection limit of LAMP assay was as low as 1 fg AVNV DNA and accordingly, this assay was 100 times more sensitive than conventional PCR technique. A comparative evaluation of 20 samples using the LAMP and PCR assays revealed a complete accord in positivity or negativity for AVNV. These results indicate that the LAMP assay is simple, sensitive, specific, and has a great potential for detection of AVNV in the laboratory and field.

Discovery of four natural clones in a crayfish species Procambarus clarkii

Self-cloning is quite rare in shrimp, lobsters, crayfish and crabs. Here we report the discovery of four natural clones of red swamp crayfish (Procambarus clarkii), each containing 2-6 genetically identical individuals, during the genotyping of 120 individuals with five microsatellites. The four clones were heterozygote at most of the five microsatellite loci. Phylogenetic analysis using microsatellite genotypes suggests recent origin of the four clones. Sequencing a part of the mitochondrial gene Cox I confirmed that the four clones were from the species Procambarus clarkii.

The small length scale effect for a non-local cantilever beam: a paradox solved

Non-local continuum mechanics allows one to account for the small length scale effect that becomes significant when dealing with microstructures or nanostructures. This paper presents some simplified non-local elastic beam models, for the bending analyses of small scale rods. Integral-type or gradient non-local models abandon the classical assumption of locality, and admit that stress depends not only on the strain value at that point but also on the strain values of all points on the body. There is a paradox still unresolved at this stage: some bending solutions of integral-based non-local elastic beams have been found to be identical to the classical (local) solution, i.e. the small scale effect is not present at all. One example is the Euler-Bernoulli cantilever nanobeam model with a point load which has application in microelectromechanical systems and nanoelectromechanical systems as an actuator. In this paper, it will be shown that this paradox may be overcome with a gradient elastic model as well as an integral non-local elastic model that is based on combining the local and the non-local curvatures in the constitutive elastic relation. The latter model comprises the classical gradient model and Eringen's integral model, and its application produces small length scale terms in the non-local elastic cantilever beam solution.

Identification and verification of QTL associated with growth traits in two genetic backgrounds of Barramundi (Lates calcarifer)

Quantitative trait loci (QTL) affecting growth traits have previously been mapped in linkage groups (LG) 2, 3 and 23 of Barramundi (Lates carcalifer), but these QTL have not been verified in different genetic backgrounds and environments. Here, we report the identification and verification of QTL for growth traits on LG2, 3, 10 and 23 in F(1) families constructed using brooders from the Singapore Marine Aquaculture Center (MAC) and from wild stocks collected in Thailand (THAI). The previously detected QTL for body weight and length linked to marker Lca371 on LG2 were confirmed in both the MAC and THAI families, whereas other QTL previously mapped to LG3 and 23 were only detected in one of the two families. QTL for body weight and length were identified in the MAC family, but not in the THAI family, in a region where the insulin-like growth factor 2 (IGF2) and tyrosine hydroxylase 1 (TH1) genes are located on LG10. Significant epistatic interactions were identified between markers Lca287 on LG2 and IGF2 on LG10 for growth trait QTL in the MAC family, but not in the THAI family. Effects of the IGF2, TH1 and parvalbumin 1 candidate genes were family-specific. Our results indicate that some but not all QTL are family-specific in Barramundi.

Buckling of carbon nanotubes: a literature survey

This survey paper comprises 5 sections. In Section 1, the reader is introduced to the world of carbon nanotubes where their structural form and properties are highlighted. Section 2 presents the various buckling behaviors exhibited by carbon nanotubes that are discovered by carbon nanotube researchers. The main factors, such as dimensions, boundary conditions, temperature, strain rate and chirality, influencing the buckling behaviors are discussed in Section 3. Section 4 presents the continuum models, atomistic simulations and experimental techniques in studying the buckling phenomena of carbon nanotubes. A summary as well as recommendations for future research are given in Section 5. Finally a large body of papers, over 200, is given in the reference section. It is hoped that this survey paper will provide the foundation knowledge on carbon nanotube buckling and inspire researchers to advance the modeling, simulation and design of carbon nanotubes for practical applications.

Electron beam-induced thickening of the protective oxide layer around Fe nanoparticles

There are many circumstances in science where the process of measuring the properties of a system alters the system. An imaging process can exert an inadvertent effect on the object being observed. Consequently, what we observe does not necessarily represent what had been present before the observation. Normally, this effect can be ignored if the consequence of such a change is believed not to be significant. The expansion of nanostructured materials has made high-resolution transmission electron microscopy one of the indispensable tools for probing the characteristics of nanomaterials. Modification of nanoparticles by the electron beam during their imaging has been widely noticed and this is generally believed to be due to electron beam-induced heating effect, defect formation in the particles, charging of the particle, or excitation of surrounding gases. However, an explicit experimental identification of which process dominates is often very hard to establish. We report the thickening of native oxide layer on iron nanoparticle under electron beam irradiation. Based on atomic level imaging, electron diffraction, and computer simulation, we have direct evidence that the protecting oxide layer formed on Fe nanoparticle at room temperature in air or oxygen continues to grow during an electron beam bombardment in the vacuum system typical of most TEM systems. Typically, the oxide layer increases from approximately 3 to approximately 6 nm following approximately 1h electron beam exposure typically with an electron flux of 7 x 10(5)nm(-2)s(-1) and an vacuum of approximately 3 x 10(-5)Pa. Partial illumination of a nanoparticle and observation of the shell thickening conclusively demonstrates that many of the mechanisms postulated to explain such processes are not occurring to a significant extent. The observed growth is not related to the electron beam-induced heating of the nanoparticle, or residual oxygen ionization, or establishment of an electrical field, rather it is related to electron beam-facilitated mass transport across the oxide layer (a defect-related process). The growth follows a parabolic growth law.

Transmission enhancement through a trench-surrounded nano metallic slit by bump reflectors

We propose using a pair of bumps bordering the conventional trench-surrounded metal nano slit in order to confine the surface waves and further enhance the slit transmission. The bump height of 1.mum is larger than the depth of penetration on air side of the surface waves. The reflectivity of such bumps is larger than 95%. A very large slit transmission, which is 50% of the energy of the incident beam impinging on the entire size 13.mum of the trench-surrounded slit structure, is obtained through the metallic slit of 50nm width and 400nm depth. The bumps enhance the transmission by 1.75 fold.

The constitutive relation and small scale parameter of nonlocal continuum mechanics for modelling carbon nanotubes

In this paper, the constitutive relations of nonlocal elasticity theory are presented for application in the analysis of carbon nanotubes (CNTs) when modelled as Euler-Bernoulli beams, Timoshenko beams or as cylindrical shells. In particular, the shear stress and strain relation for the nonlocal Timoshenko beam theory is discussed in great detail due to a misconception by some researchers that the nonlocal effect should appear in this constitutive relation. Different theories for proposing the value of the small scale parameter are also introduced and a recommendation for the value from the standpoint of wave propagation of CNTs is given.

Isolation, characterization, and linkage analyses of 74 novel microsatellites in Barramundi (Lates calcarifer)

Barramundi (Lates calcarifer) is an important marine food fish species in Southeast Asia and Australia. Seventy-four novel microsatellites were isolated from a genomic DNA library enriched for CA repeats and were characterized in 24 unrelated individuals. Among the 74 microsatellites, 71 were polymorphic, with an average allele number of 7.0 +/- 3.6/locus. The average expected heterozygosity of these polymorphic markers was 0.66. Sixty-three of the 71 polymorphic microsatellites conformed to Hardy-Weinberg equilibrium. Linkage analyses were conducted in a reference family, leading to the assignment of 34 novel microsatellites and 16 published markers in 16 linkage groups. The novel microsatellites developed in this study will contribute significantly to the construction of a first-generation linkage map for mapping of quantitative trait loci in Barramundi, and supply a large choice of markers for studies on population genetics, stock management, and pedigree reconstruction.

Characterization of two parvalbumin genes and their association with growth traits in Asian seabass (Lates calcarifer)

Parvalbumins are extremely abundant in fish muscle and play an important role in muscle relaxation. In this study, two parvalbumin genes (PVALB1 and PVALB2) were cloned from Asian seabass (Lates calcarifer). The cDNAs for PVALB1 and PVALB2 were 840 and 667 bp respectively. Both genes consisted of five exons and four introns, encoded 109 amino acids, and were of beta lineage. Using real-time polymerase chain reaction, expression of PVALB1 was detected in all 10 tissues tested, with expression in brain, kidney, muscle and small intestine being 15- to 322-fold higher than in the other tissues. Expression of PVALB2 was detected only in muscle, brain and intestine, and was up to 10-fold lower than PVALB1 expression. A (CT)(17) microsatellite in the 3'-untranslated region of PVALB1 and three single nucleotide polymorphisms (SNPs) in the third intron of PVALB2 were identified. The microsatellite in PVALB1 was significantly associated with body weight and body length at 90 days post-hatch (P < 0.01), whereas the SNPs in PVALVB2 were not associated with these traits.

Morphological Evolution of Ba(NO3)2 Supported on α-Al2O3(0001): An In Situ TEM Study

A key question for the BaO-based NOx storage/reduction catalyst system is the morphological evolution of the catalyst particles during the uptake and release of NOx. Notably, because the formed product during NOx uptake, Ba(NO3)2, requires a lattice expansion from BaO, one can anticipate that significant structural rearrangements are possible during the storage/reduction processes. Associated with the small crystallite size of high-surface area gamma-Al2O3, it is difficult to extract structural and morphological features of Ba(NO3)2 supported on gamma-Al2O3 by any direct imaging method, including transmission electron microscopy. In this work, by choosing a model system of Ba(NO3)2 particles supported on single-crystal alpha-Al2O3, we have investigated the structural and morphological features of Ba(NO3)2 as well as the formation of BaO from Ba(NO3)2 during the thermal release of NOx, using ex-situ and in-situ TEM imaging, electron diffraction, energy dispersive spectroscopy (EDS), and Wulff shape construction. We find that Ba(NO3)2 supported on alpha-Al2O3 possesses a platelet morphology, with the interface and facets being invariably the eight [111] planes. Formation of the platelet structure leads to an enlarged interface area between Ba(NO3)2 and alpha-Al2O3, indicating that the interfacial energy is lower than the Ba(NO3)2 surface free energy. In fact, Wulff shape constructions indicate that the interfacial energy is approximately 1/4 of the [111] surface free energy of Ba(NO3)2. The orientation relationship between Ba(NO3)2 and the alpha-Al2O3 is alpha-Al2O3[0001]//Ba(NO3)2[111] and alpha-Al2O3(1-210)//Ba(NO3)2(110). Thus, the results clearly demonstrate dramatic morphology changes in these materials during NOx release processes. Such changes are expected to have significant consequences for the operation of the practical NOx storage/reduction catalyst technology.

Effects of artificial supplemental light on the reproductive season of geese kept in open houses

1. New lighting programmes were designed to change the pattern of goose reproduction, based on the response of predictable avian photoperiodic stimulation. The objective of this study was to evaluate the efficiency of a long photoperiod of 20L on shifting goose reproduction to the non-breeding season in an open housing system. 2. Eighty mature White Roman geese were randomly allocated into 4 groups (male:female = 1:4). The supplemental lighting programmes with a daily photoperiod of 20 h were initiated on 22 November and withdrawn when 90% of geese were moulting in the treatment groups. Artificial light intensities of 220, 120 and 20 lux were provided to experimental groups A, B and C, respectively. In contrast, the geese in control group D were kept under natural lighting conditions throughout this study. 3. The annual reproductive curves of all the experimental groups consisted of two separate laying periods. The first period was induced by the supplemental lighting programme while the second was induced by the naturally increasing photoperiod in this subtropical region. The first laying period of the experimental groups occurred in the breeding season, and the second was relocated to the non-breeding season. 4. The supplemental lighting could shift the laying periods of geese to the non-breeding season and had no significant effect on annual reproductive performance. The supplemental light programmes described here were able to manipulate the reproductive season of geese reared in open houses, which would be of practical value.

Negligible magnetism in excellent structural quality Cr(x)Ti(1-x)O(2) anatase: contrast with high-T(C) ferromagnetism in structurally defective Cr(x)Ti(1-x)O(2)

We reexamine the mechanism of ferromagnetism in doped TiO(2) anatase, using epitaxial Cr:TiO(2) with excellent structural quality as a model system. In contrast to highly oriented but defective Cr:TiO(2) (approximately 0.5 micro(b)/Cr), these structurally superior single crystal films exhibit negligible ferromagnetism. Similar results were obtained for Co:TiO(2). We show for the first time that charge-compensating oxygen vacancies alone, as predicted by F-center mediated exchange, are not sufficient to activate ferromagnetism. Instead, the onset of ferromagnetism correlates with the presence of structural defects.

Limiting burn extension by transient inhibition of Connexin43 expression at the site of injury

Extension of a burn wound over the first 24h following injury is recognised clinically, and leads to diagnostic and therapeutic dilemmas. In the central nervous system, a similar spread of damage, beyond the initial injury, can occur via the spread of death signals from injured cells to their healthy neighbours via Connexin43 (Cx43) gap junction channels. In the skin, Cx43 is expressed in the basal epidermis and in fibroblasts and dermal appendages. We have used Cx43 specific antisense oligodeoxynucleotide approach to transiently down-regulate Cx43 protein in the early stages of partial thickness cutaneous burn wound healing. Antisense ODNs reduce the spread of tissue damage and neutrophil infiltration around the wound following injury. Epithelial cell proliferation is increased and the rate of wound closure is accelerated, compared to controls. Resultant scarring is smaller with less granulation tissue and more dermal appendages than controls. These findings suggest that Cx43 antisense treatment speeds partial thickness burn wound healing and reduces scarring. We suggest that this approach may provide an effective adjunct to managing partial thickness burn wounds.

Stability of QTLs for rice grain dimension and endosperm chalkiness characteristics across eight environments

Rice appearance quality, including traits specifying grain dimension and endosperm chalkiness, represents a major problem in many rice-producing areas of the world. In this study, the genetic basis of six appearance quality traits of milled rice was dissected into quantitative trait loci (QTL) main effects, and the stability of these QTLs was assessed in a population of 66 chromosome segment substitution lines (CSSLs) across eight environments. The CSSLs showed transgressive segregation for many of the traits, and significant correlations were detected among most of the traits. Twenty-two QTLs were identified on eight chromosomes, and numerous QTLs affecting related traits were mapped in the same regions, probably reflecting pleiotropic effects. Nine QTLs, namely qGL-1,qGL-3, qGW-5,qLWR-3, qLWR-5,qPGWC-8, qPGWC-9, qACE-8, and qDEC-8, were consistently detected across the eight environments. The additive main effect and multiplicative interaction (AMMI) analysis showed that genotype (G) x environment (E) interaction was significant for all six traits, with the first three iPCA terms accounting for over 80% of the G x E variance. Both D(I) values and the iPCA1-iPCA2 biplots showed that the CSSLs harboring the nine QTL alleles were more stable than those carrying any of the additional 13 QTL alleles, thereby confirming their environmental stability and pointing to their appropriateness as targets for marker-assisted selection for high-quality rice varieties.