Surface plasmon effects in the absorption enhancements of amorphous silicon solar cells with periodical metal nanowall and nanopillar structures

The authors numerically investigate the absorption enhancement of an amorphous Si solar cell, in which a periodical one-dimensional nanowall or two-dimensional nanopillar structure of the Ag back-reflector is fabricated such that a dome-shaped grating geometry is formed after Si deposition and indium-tin-oxide coating. In this investigation, the effects of surface plasmon (SP) interaction in such a metal nanostructure are of major concern. Absorption enhancement in most of the solar spectral range of significant amorphous Si absorption (320-800 nm) is observed in a grating solar cell. In the short-wavelength range of high amorphous Si absorption, the weakly wavelength-dependent absorption enhancement is mainly caused by the broadband anti-reflection effect, which is produced through the surface nano-grating structures. In the long-wavelength range of diminishing amorphous Si absorption, the highly wavelength-sensitive absorption enhancement is mainly caused by Fabry-Perot resonance and SP interaction. The SP interaction includes the contributions of surface plasmon polariton and localized surface plasmon.

Fabrication of surface metal nanoparticles and their induced surface plasmon coupling with subsurface InGaN/GaN quantum wells

Based on the fabrication of Ag nanoparticles (NPs) with controlled geometry and surface density on an InGaN/GaN quantum well (QW) epitaxial structure, which contains indium-rich nano-clusters for producing localized states and free-carrier (delocalized) states in the QWs, and the characterization of their localized surface plasmon (LSP) coupling behavior with the carriers in the QWs, the interplay behavior of LSP coupling with carrier delocalization in the QWs is demonstrated. By using the polystyrene nanosphere lithography technique with an appropriate nanosphere size and adjusting the post-fabrication thermal annealing condition, the induced LSP resonance wavelength of the fabricated Ag NPs on the QW sample can match the QW emission wavelength for generating the coherent coupling between the carriers in the QWs and the induced LSP. The coupling leads to the enhancement of radiative recombination rate in the QWs and results in increased photoluminescence (PL) intensity, red-shifted PL spectrum, reduced PL decay time, and enhanced internal quantum efficiency. It is found that the observed effects are mainly due to the LSP coupling with the delocalized carriers in the QWs.

Observations of cardiac beating behaviors of wild-type and mutant Drosophilae with optical coherence tomography

Time-resolved optical coherence tomography (OCT) scanning images of wild-type and mutant fruit flies (Drosophila melanogaster), illustrating the heartbeat patterns for evaluating their cardiac functions, are demonstrated. Based on the heartbeat patterns, the beat rate and the relative phase between the first two heart segments can be evaluated. The OCT scanning results of mutant flies with impaired proteasome function in cardiac muscles show irregular heartbeat patterns and systematically decreased average beat rates, when compared with the regular patterns of ~4.97 beats/s in average beat rate of the wild-type. In both wild-type and proteasome mutant flies, the beatings at different locations in the same heart segment are essentially synchronized. However, between different heart segments, although the beating in the second segment shows a lag in phase behind that of the first segment in a wild-type, in a proteasome mutant, the beating in the second segment becomes significantly leading that of the first segment. Besides the comparison between the wild-type and proteasomal mutant flies, the influences of using different methods for immobilizing flies during OCT scanning on the heart functions are demonstrated.

Surface plasmon coupling with radiating dipole for enhancing the emission efficiency of a light-emitting diode

The experimental demonstrations of light-emitting diode (LED) fabrication with surface plasmon (SP) coupling with the radiating dipoles in its quantum wells are first reviewed. The SP coupling with a radiating dipole can create an alternative emission channel through SP radiation for enhancing the effective internal quantum efficiency when the intrinsic non-radiative recombination rate is high, reducing the external quantum efficiency droop effect at high current injection levels, and producing partially polarized LED output by inducing polarization-sensitive SP for coupling. Then, we report the theoretical and numerical study results of SP-dipole coupling based on a simple coupling model between a radiating dipole and the SP induced on a nearby Ag nanoparticle (NP). To include the dipole strength variation effect caused by the field distribution built in the coupling system (the feedback effect), the radiating dipole is represented by a saturable two-level system. The spectral and dipole-NP distance dependencies of dipole strength variation and total radiated power enhancement of the coupling system are demonstrated and interpreted. The results show that the dipole-SP coupling can enhance the total radiated power. The enhancement is particularly effective when the feedback effect is included and hence the dipole strength is increased.

Three-dimensional illumination system using dielectric liquid lenses

A 25-pixel illumination system composed of a 5 × 5 dielectric liquid-lens (DLL) zoom module array, 25 light-emission diodes (LEDs), and a secondary optical lens demonstrates 3D light field manipulation. LEDs function as 2D illumination pixels while the DLL module array performs longitudinal illuminance adjustability by zooming each illumination pixel. A test on the similarity of two illuminance patterns between experiments and simulations shows a normalized cross correlation (NCC) higher than 0.8, indicating the feasibility of the system design. Also, the illumination system is further applied to correct a distorted light pattern on a 45° tilt screen as well as to perform light compensation on distance-differential objects.

Differential gene expression between the porcine morula and blastocyst

The survival and development of pre-implantation embryos are determinant factors affecting the outcome of animal reproduction. It is essential to transfer the expression of the genetic material from maternal sources, that is the ovum to the zygote before implantation to ensure successful development. Differentiation and transformation of blastomeres initiated during the morula and blastocyst stages is an important step of the embryonic development prior to implantation. We collected morula and early blastocyst samples from pure-bred Landrace pigs in vivo to study the differential gene expression patterns at these two stages. Total RNA was extracted from individual embryos and two rounds of amplification were employed. Two micrograms of antisense RNA, targets, were prepared and hybridized with each of four custom made oligo microarrays representing 24,000 porcine genes. The analyses of replicate hybridizations showed that among the 24,000 genes, 162 genes were expressed fivefold or greater in the morula compared to early blastocysts and 2126 genes were expressed fivefold or greater in early blastocysts compared to the morula. Of these differentially expressed genes, 1429 genes were functionally annotated with related human Gene Ontology terms. In addition to basic metabolic processes, genes related to signal transduction, transportation and cell differentiation were found in both stages and were up-regulated as embryo development proceeded. Real time polymerase chain reaction was utilized to quantify 12 genes differentially expressed in the 2 embryonic stages and validated the reliability of major evidences shown in microarrays. In conclusion, we have obtained a preliminary landscape of genes differentially expressed during the transition from morula to early blastocysts in pigs and showed a generally increased transcriptional activity, perhaps in preparation for implantation. Our results provide an opportunity to study the functions of these genes in relation to the development and survival of pre-implantation porcine embryos.

Effect of dopants on the soft magnetic properties and high frequency characteristics of FeCoBM (M = Ti, Nb, Hf, and Ta) thin films

Effect of dopants on the soft magnetic properties and high frequency characteristics of FeCoBM thin films (M = Ti, Nb, Hf, and Ta) have been studied. For (Fe0.55Co0.45)(100-x)B(x) (x = 5-15) thin films, with the increase of B content, the resistivity was increased because B could decrease the crystallinity of the films. The (Fe0.55Co0.45)90B10 thin film showed the optimum properties, where 4piM(s) = 16.1 kG, H(ce) = 64.2 Oe, H(ch) = 13.5 Oe, H(k) = 310 Oe and p = 338 microomega-cm. To reduce the coercivity of the film, the elements M, including Ti, Nb, Hf, and Ta, were selected to substitute for B in the FeCoB films. It was found that (Fe0.55Co0.45)90B6Ti2Nb2 thin film after annealing at a temperature of 200 degrees C for 30 min showed the optimal properties, where 4piM(s) = 15.8 kG, H(ce) = 4.8 Oe, H(ch) = 3.6 Oe, H(k) = 224 Oe and p = 290 microomega-cm. The theoretically calculated ferromagnetic resonance frequency of the developed films can be higher than 5 GHz.

A GaN photonic crystal membrane laser

The implementation of a series of optically pumped GaN photonic crystal (PhC) membrane lasers is demonstrated at room temperature. The photonic crystal is composed of a scalene-triangular arrangement of circular holes in GaN. Three defect structures are fabricated for comparing their lasing characteristics with those of perfect PhC. It is observed that all the lasing defect modes have lasing wavelengths very close to the band-edge modes in the perfect PhC structure. Although those lasing modes, including band-edge and defect modes, have different optical pump thresholds, different lasing spectral widths, different quality factors (Q factors), and different polarization ratios, all their polarization distributions show maxima in the directions around one of the hole arrangement axes. The similar lasing characteristics between the band-edge and defect modes are attributed to the existence of extremely narrow partial band gaps for forming the defect modes. Also, the oriented polarization properties are due to the scalene-triangle PhC structure. In one of the defect lasing modes, the lasing threshold is as low as 0.82 mJ cm(-2), the cavity Q factor is as large as 1743, and the polarization ratio is as large as 25.4. Such output parameters represent generally superior lasing behaviors when compared with previously reported implementations of similar laser structures.

Miniaturization of dielectric liquid microlens in package

This study presents packaged microscale liquid lenses actuated with liquid droplets of 300-700 μm in diameter using the dielectric force manipulation. The liquid microlens demonstrated function focal length tunability in a plastic package. The focal length of the liquid lens with a lens droplet of 500 μm in diameter is shortened from 4.4 to 2.2 mm when voltages applied change from 0 to 79 V(rms). Dynamic responses that are analyzed using 2000 frames∕s high speed motion cameras show that the advancing and receding times are measured to be 90 and 60 ms, respectively. The size effect of dielectric liquid microlens is characterized for a lens droplet of 300-700 μm in diameter in an aspect of focal length.

Chemical genetics approach to restoring p27Kip1 reveals novel compounds with antiproliferative activity in prostate cancer cells

BACKGROUND

The cyclin-dependent kinase (CDK) inhibitor p27(Kip)¹ is downregulated in a majority of human cancers due to ectopic proteolysis by the ubiquitin-proteasome pathway. The expression of p27 is subject to multiple mechanisms of control involving several transcription factors, kinase pathways and at least three different ubiquitin ligases (SCF(SKP)², KPC, Pirh2), which regulate p27 transcription, translation, protein stability and subcellular localization. Using a chemical genetics approach, we have asked whether this control network can be modulated by small molecules such that p27 protein expression is restored in cancer cells.

RESULTS

We developed a cell-based assay for measuring the levels of endogenous nuclear p27 in a high throughput screening format employing LNCaP prostate cancer cells engineered to overexpress SKP2. The assay platform was optimized to Z' factors of 0.48 - 0.6 and piloted by screening a total of 7368 chemical compounds. During the course of this work, we discovered two small molecules of previously unknown biological activity, SMIP001 and SMIP004, which increase the nuclear level of p27 at low micromolar concentrations. SMIPs (small molecule inhibitors of p27 depletion) also upregulate p21(Cip)¹, inhibit cellular CDK2 activity, induce G1 delay, inhibit colony formation in soft agar and exhibit preferential cytotoxicity in LNCaP cells relative to normal human fibroblasts. Unlike SMIP001, SMIP004 was found to downregulate SKP2 and to stabilize p27, although neither SMIP is a proteasome inhibitor. Whereas the screening endpoint - nuclear p27 - was robustly modulated by the compounds, SMIP-mediated cell cycle arrest and apoptosis were not strictly dependent on p27 and p21 - a finding that is explained by parallel inhibitory effects of SMIPs on positive cell cycle regulators, including cyclins E and A, and CDK4.

CONCLUSIONS

Our data provide proof-of-principle that the screening platform we developed, using endogenous nuclear p27 as an endpoint, presents an effective means of identifying bioactive molecules with cancer selective antiproliferative activity. This approach, when applied to larger and more diverse sets of compounds with refined drug-like properties, bears the potential of revealing both unknown cellular pathways globally impinging on p27 and novel leads for chemotherapeutics targeting a prominent molecular defect of human cancers.

Au nanorings for enhancing absorption and backscattering monitored with optical coherence tomography

Preparation of a high-concentration Au nanoring (NR) water solution and its applications to the enhancement of image contrast in optical coherence tomography (OCT) and the generation of the photothermal effect in a bio-sample through localized surface plasmon (LSP) resonance are demonstrated. Au NRs are first fabricated on a sapphire substrate with colloidal lithography and secondary sputtering of Au, and then transferred into a water solution through a liftoff process. By controlling the NR geometry, the LSP dipole resonance wavelength in tissue can cover a spectral range of 1300 nm for OCT scanning of deep tissue penetration. The extinction cross sections of the fabricated Au NRs in water are estimated to give levels of 10(-10)-10(-9) cm(2) near their LSP resonance wavelengths. The fabricated Au NRs are then delivered into pig adipose samples for OCT scanning. It is observed that, when resonant Au NRs are delivered into such a sample, LSP resonance-induced Au NR absorption results in a photothermal effect, making the opaque pig adipose cells transparent. Also, the delivered Au NRs in the intercellular substance enhance the image contrast of OCT scanning through LSP resonance-enhanced scattering. By continuously OCT scanning a sample, both photothermal and image contrast enhancement effects are observed. However, by continually scanning a sample with a low scan frequency, only the image contrast enhancement effect is observed.

Absorption enhancement of an amorphous Si solar cell through surface plasmon-induced scattering with metal nanoparticles

The simulation results of absorption enhancement in an amorphous-Si (a-Si) solar cell by depositing metal nanoparticles (NPs) on the device top and embedding metal NPs in a layer above the Al back-reflector are demonstrated. The absorption increase results from the near-field constructive interference of electromagnetic waves in the forward direction such that an increased amount of sunlight energy is distributed in the a-Si absorption layer. Among the three used metals of Al, Ag, and Au, Al NPs show the most efficient absorption enhancement. Between the two used NP geometries, Al nanocylinder (NC) are more effective in absorption enhancement than Al nanosphere (NS). Also, a random distribution of isolated metal NCs can lead to higher absorption enhancement, when compared with the cases of periodical metal NC distributions. Meanwhile, the fabrication of both top and bottom Al NCs in a solar cell results in further absorption enhancement. Misalignments between the top and bottom Al NCs do not significantly reduce the enhancement percentage. With a structure of vertically aligned top and bottom Al NCs, solar cell absorption can be increased by 52%.

Visfatin regulates genes related to lipid metabolism in porcine adipocytes

Visfatin is a visceral adipose tissue-specific adipocytokine that plays a positive role in attenuating insulin resistance by binding to the insulin receptor. Visfatin has been suggested to play a role in the regulation of lipid metabolism and inflammation; however, the mechanism remains unclear. We investigated the effects of visfatin on the regulation of gene expression in cultured porcine preadipocytes and differentiated adipocytes. In preadipocytes, the mRNA abundance of lipoprotein lipase and PPARgamma were significantly increased by visfatin or insulin treatment after 8 d (all P < 0.05). In the presence of insulin, the mRNA abundance of adipocyte fatty acid-binding protein was 24.7-fold greater than in the untreated group (P < 0.05), whereas visfatin alone had no effect on adipocyte fatty acid-binding protein mRNA abundance. Adipocyte differentiation was induced by insulin treatment for 8 d. In differentiated porcine adipocytes, exposure to insulin or visfatin for 24 h increased (P < 0.05) fatty acid synthase mRNA abundance but had no effect on the expression of sterol regulatory element binding-protein 1c mRNA. We also found a 5.8-fold upregulation of IL-6 expression in porcine adipocytes after 24 h of treatment with visfatin (P < 0.05). These results demonstrated that visfatin upregulated lipoprotein lipase expression in preadipocytes, potentially facilitating lipid uptake, and increased the gene expression of fatty acid synthase in differentiated adipocytes to potentially enhance lipogenic activity. Furthermore, visfatin can upregulate IL-6 expression in differentiated porcine adipocytes. The information presented in this study provides insights into the roles of visfatin in lipid metabolism in pigs.

Enhancing InGaN-based solar cell efficiency through localized surface plasmon interaction by embedding Ag nanoparticles in the absorbing layer

The use of localized surface plasmon (LSP) interaction for significantly enhancing InGaN absorption near its band edge and the overall efficiency of an InGaN-based solar cell by embedding Ag nanoparticles (NPs) in the InGaN absorbing layer is numerically demonstrated. The generation of LSP resonance on the embedded Ag NPs and the NP scattering can produce a field distribution in the InGaN layer for enhancing absorption. It is shown that the embedded Ag NPs do not significantly affect the transport of the photo-generated carriers. The distortion of static electrical stream lines in the solar cell due to the embedded Ag NP leads to a decrease of photocurrent by only a few percents. Based on the material parameter values we use, unless the surface recombination velocity at the interface between the Ag NP and surrounding InGaN is extremely high, Ag NP embedment in the absorbing layer of an InGaN-based solar cell can enhance its efficiency by up to 27%. Such an increase is significantly larger than that achieved by depositing metal NP on the top surface of a solar cell.

Diagnosis of oral submucous fibrosis with optical coherence tomography

The epithelium (EP) thickness and the standard deviation (SD) of A-mode scan intensity in the laminar propria (LP) layer are used as effective indicators for the diagnosis of oral submucous fibrosis (OSF) based on the noninvasive clinical scanning of a swept-source optical coherence tomography (OCT) system of approximately 6 mum in axial resolution (in tissue) and 103 dB in sensitivity. Compared with the corresponding parameters in healthy oral mucosal mucosa, in OSF mucosa, the EP thickness becomes smaller and the SD of A-mode scan intensity in the LP layer (LP SD) also becomes smaller. The LP SD can also be used for effectively differentiating OSF (small LP SD) from lesion (large LP SD). This application is particularly useful in the case of a lesion without a clear surface feature. Meanwhile, the use of the SD of A-mode scan intensity in the EP layer (EP SD) can further help in differentiating OSF (medium EP SD) from healthy oral mucosal (small EP SD) and lesion (large EP SD) conditions. Compared with the conventional method of maximum mouth opening measurement, the use of the proposed OCT scanning results can be a more effective technique for OSF diagnosis.

Fabrication of sphere-like Au nanoparticles on substrate with laser irradiation and their polarized localized surface plasmon behaviors

The fabrications of sphere-like Au nanoparticles (NPs) on sapphire, GaN, and SiO(2) substrates through the irradiation of a few pulses of 266-nm laser onto Au thin films deposited on the substrates are demonstrated. The top-view diameter, contact angle on substrate, surface population density, and surface coverage percentage of the NPs can be controlled by the Au thin film thickness, laser energy density, substrate choice, and the gas or liquid, in which the Au thin film is immersed during laser irradiation. Optical transmission measurements show clear in-plane and out-of-plane localized surface plasmon resonance (LSPR) features, including the air resonance feature dictated by the gas or liquid immersing the NPs during transmission measurement, the in-plane substrate resonance feature controlled by the substrate material and the contact angle, and the out-of-plane resonance feature, which is strongly influenced also by the substrate material and the contact angle. Numerical simulations based on the finite-element method using the experimental parameters show highly consistent LSPR spectral positions and their variation trends. From the simulation results, one can also observe the relative importance between NP absorption and scattering in contributing to the extinction. This simple laser-irradiation method for fabricating sphere-like Au NPs of no aggregation and of strong adhesion to the substrate is useful for developing polarization-sensitive LSPR bio-sensing.

Secretion profiles of venom alkaloids in Solenopsis geminata (Hymenoptera: Formicidae) in Taiwan

Solenopsis geminata (F.) was introduced into southern Taiwan decades ago and has continued to threaten the residents. Although the venom compositions of various fire ant species have been studied, the effects of environmental cues on the secretion pattern have received relatively little attention in an area with subtropical climate and high humidity, such as Taiwan. This study characterizes the effects of temperature and season on the venom compositions of S. geminata in Taiwan. Pure venom was sampled by using a microcapillary pipette and immersing the whole ant in hexane and subjected to gas chromatography-mass spectrometry analysis. The results showed that the ratio of cis C(11) to trans C(11) alkaloids in major workers was significantly higher than that in minor workers. No significant differences could be found in either the relative alkaloids content or the ratio of cis C(11) to trans C(11) alkaloids in venom of minor workers while rearing at four temperature conditions. Nevertheless, the ratio of cis C(11) to trans C(11) alkaloids in the venom of minor workers was the highest in spring and the lowest in winter. The results also showed that the body length, abdomen length, head length, head width, and venom volume differed significantly between major workers and minor workers of S. geminata. The venom volumes of these two castes were positively correlated with their body sizes.

Inflamed snail speeds metastasis

Macrophage infiltration and inflammatory cytokines are powerful drivers of tumorigenesis and metastasis. Wu et al., in this issue of Cancer Cell, show that TNFalpha-dependent NFkappaB activation induces COP9 signalosome-mediated inhibition of GSK3beta and the SCF(beta-TRCP) ubiquitin ligase, thus leading to stabilization of the transcription factor Snail and promoting cell migration and metastasis.

Effective energy coupling and preservation in a surface plasmon-light emitter coupling system on a metal nanostructure

The simulation results of the coupling of a radiation dipole with a surface plasmon (SP), which is induced on a metal/dielectric interface of a single groove (SG) plus a grating structure, are demonstrated. With the SG structure, the dipole can effectively couple energy into an SP feature, which has a mixed nature of localized surface plasmon (LSP) and surface plasmon polariton (SPP). The SPP energy is confined by a grating structure with a well designed grating period and position. With such a cavity configuration, the SPP energy can be well preserved. Both the dipole-SP coupling behaviors in the frequency and time domains are numerically illustrated. The results are useful for designing a metal/dielectric interface nanostructure for implementing a SPASER (surface plasmon amplification by stimulated emission of radiation) system.

Study on the decay mechanisms of surface plasmon coupling features with a light emitter through time-resolved simulations

The transient behaviors of the dipole coupling with surface plasmon (SP) features in an Ag/dielectric-interface grating structure in order to understand the characteristics of those dipole-coupling features are demonstrated. In particular, the major decay mechanisms of those coupling features can be identified. For comparison, the time-resolved behaviors of the resonant surface plasmon polariton (SPP) coupling feature on a flat interface are also illustrated. Among the three major grating-induced SP-dipole coupling features, two of them are identified to be localized surface plasmons (LSPs). The third one is a grating-assisted SPP, which shows two decay components, corresponding to the first stage of SPP in-plane propagation and the second stage of coupling system decay. In all the dipole coupling features, metal dissipation can dominate the energy relaxation process, depending on the assumption of damping factor. All the dissipation rates are proportional to the assumed damping factor in the Drude model of the metal. The dissipation rates of the LSP and resonant SPP features are about the same as the damping rate, implying their local electron oscillation natures. The dissipation rate of the grating-assisted SSP feature is consistent with theoretical calculation. In the LSP features under study, dielectric-side emission is prominent. The coupled energy in the grating-assisted SPP feature can be efficiently stored in the coupling system due to its low emission efficiency and effective energy confinement through grating diffraction.

Effective indicators for diagnosis of oral cancer using optical coherence tomography

A swept-source optical coherence tomography system is used to clinically scan oral precancer and cancer patients for statistically analyzing the effective indicators of diagnosis. Three indicators are considered, including the standard deviation (SD) of an A-mode scan signal profile, the exponential decay constant (alpha) of an A-mode-scan spatial-frequency spectrum, and the epithelium thickness (T) when the boundary between epithelium and lamina propria can still be identified. Generally, in abnormal mucosa, the standard deviation becomes larger, the decay constant of the spatial-frequency spectrum becomes smaller, and epithelium becomes thicker. The sensitivity and specificity of the three indicators are discussed based on universal and individual relative criteria. It is found that SD and alpha are good diagnosis indicators for moderate dysplasia and squamous cell carcinoma. On the other hand, T is a good diagnosis indicator for epithelia hyperplasia and moderate dysplasia.

Effective indicators for diagnosis of oral cancer using optical coherence tomography

A swept-source optical coherence tomography system is used to clinically scan oral precancer and cancer patients for statistically analyzing the effective indicators of diagnosis. Three indicators are considered, including the standard deviation (SD) of an A-mode scan signal profile, the exponential decay constant (alpha) of an A-mode-scan spatial-frequency spectrum, and the epithelium thickness (T) when the boundary between epithelium and lamina propria can still be identified. Generally, in abnormal mucosa, the standard deviation becomes larger, the decay constant of the spatial-frequency spectrum becomes smaller, and epithelium becomes thicker. The sensitivity and specificity of the three indicators are discussed based on universal and individual relative criteria. It is found that SD and alpha are good diagnosis indicators for moderate dysplasia and squamous cell carcinoma. On the other hand, T is a good diagnosis indicator for epithelia hyperplasia and moderate dysplasia.

Localized surface plasmon-induced emission enhancement of a green light-emitting diode

The output enhancement of a green InGaN/GaN quantum-well (QW) light-emitting diode (LED) through the coupling of a QW with localized surface plasmons (LSPs), which are generated on Ag nanostructures on the top of the device, is demonstrated. The suitable Ag nanostructures for generating LSPs of resonance energies around the LED wavelength are formed by controlling the Ag deposition thickness and the post-thermal-annealing condition. With a 20 mA current injected onto the LED, enhancements of up to 150% in electroluminescence peak intensity and of 120% in integrated intensity are observed. By comparing this with a similar result for a blue LED previously published, it is confirmed that surface plasmon coupling for emission enhancement can be more effective for an InGaN/GaN QW of lower crystal quality, which normally corresponds to the emission of a longer wavelength.