One germline mutation of PTCH gene in a Chinese family with non-syndromic keratocystic odontogenic tumours

Keratocystic odontogenic tumours (KOCTs) are common benign cystic tumours that arise sporadically or associated with nevoid basal cell carcinoma syndrome (NBCCS). PTCH mutation can be found in sporadically or NBCCS associated KOCTs. Few PTCH mutations in families with non-syndromic KOCTs have been reported. Through PCR and gene sequence analysis, the authors discovered one missense mutation c.3277G>C in exon 19 of PTCH gene in a Chinese family with non-syndromic KOCTs. This mutation causes one highly conserved glycine residue transit to arginine on the 10th transmembrane region of PTCH protein. This work revealed that the missense mutation of PTCH is the causative and dominant gene of KOCTs in this family.

A Multi-Anvil High Pressure System with Synchrotron X-Ray Probe: New Opportunities for In-Situ Materials Research at Simultaneously High Pressure and Temperature

We describe the multi-anvil, large-volume, high-pressure facility that is being constructed at the GeoSoilEnviroCARS (Sector 13) at the Advanced Photon Source, Argonne National Laboratory. Various multi-anvil, high-pressure apparatus will be used to cover pressure and temperature conditions up to 40 GPa and 3000 °C, respectively, with milimeter to centimeter sized samples. This national facility is open to all users, providing excellent opportunities for high pressure, high temperature experiments.

Lithium delivery enhances bone growth during midpalatal expansion

Lithium is an activator of β-catenin signaling, and β-catenin mediates bone acquisition in response to mechanical loading in the bone. We tested the hypothesis that lithium enhances new bone formation during midpalatal suture expansion. Forty-eight Wistar rats with or without suture expansion were gavage-fed daily with lithium chloride or sodium chloride. We labeled the rats with bromodeoxyuridine to evaluate the proliferation and differentiation of the osteoprogenitors. Lithium increased β-catenin expression and cell proliferation in expanding sutures. Initial delay in the differentiation of osteoprogenitors into mature osteoblasts by lithium treatment corresponded with expansion of pre-osteoblasts, which preceded the increase of new bone formation in the suture. These results suggested that β-catenin regulates proliferation of osteoprogenitors and maturation of osteoblasts during midpalatal suture expansion osteogenesis, and that lithium enhances bone regeneration by elevating β-catenin expression. Lithium treatment could be a pharmaceutical aid to improve the stability of orthodontic treatment like rapid palatal expansion.

Possible involvement of brain tumour stem cells in the emergence of a fast-growing malignant meningioma after surgical resection and radiotherapy of high-grade astrocytoma: case report and preliminary laboratory investigation

The case of a 62-year old man diagnosed with radiation-induced meningioma (RIM) after treatment for astrocytoma with an unusually short latency period of 7 months is reported. The patient first presented with a 2-month history of memory decline. Magnetic resonance imaging (MRI) showed a tumour in the left parieto-temporal lobe. Gross total resection was performed and the tumour was confirmed to be an astrocytoma. The patient received cranial radiotherapy 2 weeks later, however 7 months after radiation treatment the patient presented with headache and vomiting. MRI showed massive meningeal enhancement in the left frontal lobe, which progressively enlarged. The patient's clinical condition deteriorated and a second craniotomy was performed with complete removal of the secondary tumour, which was shown to be a malignant meningioma. Immunohistochemical staining identified CD133-positive cells in both tumours. A rare fraction of brain tumour stem cells (BTSC) was isolated from the primary astrocytoma using a serum-free culture system, suggesting that BTSC may have been involved in the rapid emergence of RIM after resection and radiation of the primary astrocytoma.

Brain tumour stem cells and neural stem cells: still explored by the same approach?

Brain tumour stem cells (BTSCs) are chiefly responsible for the in vivo long-term growth and recurrence of malignant gliomas and may be a potential treatment target. They resemble neural stem cells (NSCs), so their self-renewal and differentiation are currently investigated by the same methods used to study NSCs. There are, however, essential differences between these cell types: in many cases the marker expression pattern of BTSCs does not match the CD133(+)/NSE(-)/FAP(-) pattern of NSCs; BTSC tumourigenicity is independent of marker expression; and while attachment, serum-containing medium and withdrawal of mitogens (epidermal growth factor [EGF] and basic fibroblast growth factor [bFGF]) are essential to induce NSCs to differentiate, they do not affect BTSC tumourigenicity. Evidence implies that research on the renewal and differentiation of BTSCs should be orientated towards tumourigenicity and is essentially a pharmaceutical problem. Such an approach may contribute to the development of an accurate definition of BTSCs and to the search for selective differentiation-inducing drugs for BTSCs.

Effects of pulsed electromagnetic field vibration on tooth movement induced by magnetic and mechanical forces: a preliminary study

BACKGROUND

This study was designed to determine whether or not high-frequency and low-magnitude vibration affects orthodontic tooth movement caused by magnetic or/and mechanical forces.

METHODS

Forty-four 7-week-old Wistar rats were randomly divided into four groups, with each group further divided into experimental and control subgroups. Neodymium-Iron-Boron (Nd-Fe-B) magnets and Sentalloy closed coil springs were placed between maxillary or mandibular first molars and incisors to activate tooth movement. The animals of experimental subgroups were exposed to the vibration induced by pulsed electromagnetic fields (PEMF) whilst the control subgroups were under normal atmosphere. The experiment lasted for 14 days and all of the animals were sacrificed for examination. The changes in the space between the molar and incisor were measured to indicate the amount of tooth movement.

RESULTS

The coil springs, either with sham or active magnets, move molar much more than magnets alone, regardless of absence or presence of PEMF (p < 0.001). Under PEMF, the coil spring moved significantly more amount of tooth movement than that of coil-magnet combination (p < 0.01), as did the magnets compared to sham magnets (p < 0.019). Under a non-PEMF scenario, there was no significant difference in tooth movement between coil spring and coil-magnets combination, nor was there difference between magnets and sham magnets.

CONCLUSIONS

It is suggested that the PEMF-induced vibration may enhance the effect of mechanical and magnetic forces on tooth movement.

Pb speciation versus TCLP release in army firing range soils

A series of soil parameter and mineralogical investigative techniques were applied to assess the Pb speciation in four US Army firing range soils that presented significantly different Pb leaching regimes and soil characteristics. Soil gradation tests were complemented by total chemical analyses, X-ray powder diffraction (XRPD), Rietveld quantification, optical microscopy and scanning electron microscopy (SEM) analyses. The bulk geotechnical, mineralogical and chemical analyses pointed to two possible Pb retention mechanisms: precipitation as lead carbonate and sorption in the case of fine-grained soils. Lead speciation and mobility was further investigated by the toxicity characteristic leaching procedure (TCLP) and sequential extraction test (SET). As the TCLP Pb concentrations did not necessarily reflect the total Pb analysis of the soils, the Pb leachability ratio (TCLP/total) was found to be controlled by soil mineralogy and its response to changes in system pH. Geochemical modeling, using Visual MINTEQ, was employed to evaluate the mechanisms that controlled the observed TCLP Pb leaching behavior. It was found that lead carbonate precipitation/dissolution reactions controlled Pb TCLP leachability in all soils, while sorptive phenomena did not seem to play a role even in the case of fine-grained soils. More specifically, TCLP Pb leachability was controlled by the pH, the available Pb and the available carbonate in solution. This indicates that geochemical modeling strongly complimented TCLP Pb analyses. Thus, geochemical modeling is an important assessment tool to evaluate the magnitude of site-specific Pb-related environmental problems in firing range soils. Carbonation reactions, involving metallic Pb, that occur during the SET obscure its ability to reliably ascertain Pb speciation. More specifically, SET lumps the extractable Pb into predetermined phase categories that may not be truly representative of the actual soil mineralogy or dominant forms of Pb in the soil. A thorough geotechnical, mineralogical and chemical investigation of firing range soils, complemented by geochemical modeling, was therefore found to be a more reliable approach to evaluate Pb speciation and TCLP release in firing range soils.

Double-sided laser heating system at HPCAT for in situ x-ray diffraction at high pressures and high temperatures

An overview of a YLF:Nd laser heating system at the undulator x-ray diffraction station (16ID-B) of the high-pressure collaborative access team (HPCAT) of the Advanced Photon Source is presented. Based on the double-sided laser heating technique, the system is designed with considerable effort on the mechanical and optical stabilities, features for user-friendly operation, and the capability of accommodating diamond anvil cells of various heights up to 68 mm. This system has been used for x-ray diffraction studies of a wide range of materials to over 150 GPa and above 3000 K. Applying the laser heating technique to radial x-ray diffraction studies at simultaneous high-pressure and high-temperature (PT) conditions requires heating to be conducted at variable angles relative to the x-ray direction. A rotation laser heating design is discussed.

Changes in the physical properties of human premolar cementum after application of 4 weeks of controlled orthodontic forces

This study was performed to assess the relationship between the magnitude of orthodontic force and physical properties of individual human cementum, and to identify the sites that may be predisposed to root resorption. The findings may assist in relating physical properties of dental root cementum and its susceptibility to root resorption. Sixteen maxillary first premolar teeth were selected in eight orthodontic patients (three males and five females), mean age 14.8 years (range 11.2-17.5 years), requiring first premolar extractions. In each patient, a light orthodontic force of 25 cN was applied buccally using a sectional archwire on the first premolar on one side, while a heavy force of 225 cN was applied to the contralateral side. The teeth were extracted 4 weeks after initial force application. Hardness and elastic modulus were measured on the buccal and the lingual surfaces of the cementum at the cervical, middle, and apical third of the root. The results showed that the mean hardness and elastic modulus of cementum in the light force group were greater than in the heavy force group at all positions. There were highly significant differences in both hardness and elastic modulus between the heavy and light force groups (P < 0.01). The mean hardness and elastic modulus of cementum gradually decreased from the cervical to the apical regions for buccal as well as lingual surfaces in both groups. There was, however, an insignificant difference between hardness and elastic modulus on the buccal surface compared with the lingual surface (P < 0.05). It was concluded that the hardness and elastic modulus of cementum were affected by the application of orthodontics forces.

Cephalometric evaluation of condylar and mandibular growth modification: a review

OBJECTIVE

Based on a wealth of orthodontic archives, this work aims to review the cephalometric analysis systems that can identify the changes in condylar and mandibular position as well as growth direction in response to bite jumping therapy.

DESIGN

Numerous cephalometric approaches were screened to testify their feasibility and reliability in accurately depicting the growth modification of the condyle and the mandible. The critical assessment of the working mechanisms of these cephalometric methods was elaborated to help build up the rationale and justification for their clinical use.

RESULTS

1) The changes in condylar and mandibular size, position and growth direction can be identified by using lateral cephalograms with closed-mouth or open-mouth posture. 2) With superimposition methods where the anatomical structures for superimposition registration must be stable and reproducible, the growth modification of the condyle and the mandible between two time-points is qualitatively demonstrated in a diagram if reference lines are not constructed. The growth modification can be quantitatively identified if the reference lines are created. 3) With non-superimposition methods, the size and position of the condyle and the mandible are separately identified for each time-pint by relating them to the stable reference structures. The growth modification between two time-pints is evaluated by comparing the two separate measurements.

CONCLUSION

The application of a standardized and well designed cephalometric evaluation system may reduce the bias that attribute to the arbitrariness of the clinical effects of bite jumping functional appliances.