First Report of Laurel Wilt Disease Caused by Raffaelea lauricola on Silk Bay in Florida

Silk bay (Persea humilis Nash) is a member of the Lauraceae precinctive to the scrub forests of central and southern Florida and a sister species to the primary laurel wilt host, redbay (P. borbonia (L.) Spreng), which is generally not found in these ecosystems. In November 2011, observations of silk bay mortality near Lake Placid in Highlands County, FL, were reported to Florida Forest Service agents. A subsequent visit to roadside and homeowners' properties in the area revealed many dead and dying silkbays with characteristic laurel wilt symptoms, including wilted crowns with brown persistent foliage, frass accumulated at tree bases, sapwood with dark streaking, and ambrosia beetle entrance holes (1). Twig samples were taken and later confirmed as silk bay by the Florida Division of Plant Industry in Gainesville. Trunk samples were taken from four trees for fungal isolation. Stem sections with vascular discoloration were surface disinfested for 30 s in a 5% sodium hypochlorite solution and then plated onto cycloheximide streptomycin malt extract agar (CSMA) (1). All sapwood pieces from the four samples resulted in the same cream-buff submerged fungal growth characteristic of the laurel wilt pathogen Raffaelea lauricola T. C. Harr., Fraedrich & Aghayeva (2). DNA was extracted from a single-spore derived isolate, PL1389, and an 18S small subunit ribosomal RNA gene sequence was generated with primers NS1 and NS4, resulting in a 1,031-bp amplicon (3). A BLASTn search showed identical homology to R. lauricola strains PL159 and PL382 (GenBank Accessions No. EU257806 and JF797171, respectively, 100% similarity, e-value 0.0, and a total score of 1,982). The sequence was deposited into GenBank and assigned the accession No. JQ247569. In December 2011, a spore suspension was made by flooding a PL1389 culture plate with 2 ml of sterile water, collecting by pipette, and quantification and adjusting to 3.25 × 10⁶ spores/ml by hemacytometer. Pathogenicity was tested on potted plants in a growth chamber experiment. Five silk bays and three redbays were drill-wounded with a 3/32" drill bit and inoculated with 20 μl of the spore suspension. Three silk bays and two redbays served as water-inoculated controls. Within 5 weeks, all inoculated plants displayed the wilt and vascular discoloration characteristic of laurel wilt disease, while all water-inoculated controls remained healthy. Sapwood samples from all plants were plated onto the same CSMA media. R. lauricola was later recovered only from the wilted plants inoculated with PL1389, while no fungal growth was recovered from the asymptomatic water-inoculated controls. Silk bay, which plays a significant role in the limited scrub ecosystems of Florida, has now become another host in the laurel wilt epidemic, with its implications upon the scrub forests yet to be seen. References: (1) S. W. Fraedrich et al. Plant Dis. 92:215, 2008. (2) T. C. Harrington et al. Mycotaxon 104:399, 2008. (3) M. A. Innis et al. PCR Protocols: A Guide to Methods and Applications. Academic Press. San Diego, CA, 1990.

Patterning of TiO2 particles on poly(dimethyl siloxane) films by using proton irradiation and liquid-phase deposition process

Micropatterning of titanium dioxide (TiO2) on the surface of thin poly(dimethyl siloxane) (PDMS) films was described by means of proton irradiation and liquid-phase deposition (LPD) techniques. The surface of thin PDMS films was irradiated with accelerated proton ions through a pattern mask in the absence or presence of oxygen in order to create hydrophilically/hydrophobically patterned surfaces. The results of the surface analysis revealed that the PDMS films irradiated at the fluence of 1 x 10(15) ions cm-2 in the presence of oxygen showed the highest hydrophilicity. The LPD of TiO2 particles on the patterned PDMS film surface showed a selective deposition of TiO2 on the irradiated regions, leading to well defined TiO2 micropatterns. The crystal structure of the formed TiO2 films was found to be in an anatase phase by X-ray diffraction analysis. This process can be applied for patterning various metal and metal oxide particles on a polymer substrate.

Electrical percolation networks of carbon nanotubes in a shear flow

The effect of shear on the electrical percolation network of carbon nanotube (CNT)-polymer composites is investigated using computer simulations. Configurations of CNTs in a simple shear, obtained by using Monte Carlo simulations, are used to locate the electrical percolation network of CNTs and calculate the electric conductivity. When exposed to the shear, CNTs align parallel to the shear direction and the electrical percolation threshold CNT concentration decreases. Meanwhile, after a certain period of the shear imposition above a critical shear rate, CNTs begin to form an aggregate and the percolating network of CNTs is broken, thus decreasing the electric conductivity significantly. We also construct quasiphase diagrams for the aggregate formation and the electrical percolation network formation to investigate the effect of the shear rate and CNT concentration.

Search for a vectorlike quark with charge 2/3 in t+Z events from pp collisions at √s=7 TeV

A search for pair-produced heavy vectorlike charge-2/3 quarks, T, in pp collisions at a center-of-mass energy of 7 TeV, is performed with the CMS detector at the LHC. Events consistent with the flavor-changing-neutral-current decay of a T quark to a top quark and a Z boson are selected by requiring two leptons from the Z-boson decay, as well as an additional isolated charged lepton. In a data sample corresponding to an integrated luminosity of 1.14  fb(-1), the number of observed events is found to be consistent with the standard model background prediction. Assuming a branching fraction of 100% for the decay T→tZ, a T quark with a mass less than 475  GeV/c(2) is excluded at the 95% confidence level.

First Report of Laurel Wilt Disease Caused by Raffaelea lauricola on Pondspice in Florida

Laurel wilt is a fungal vascular disease of redbay (Persea borbonia (L.) Spreng) and other plants in the family Lauraceae in the southeastern United States (1). The disease is caused by Raffaelea lauricola T. C. Harr., Fraedrich & Aghayeva, which is vectored by the exotic redbay ambrosia beetle (Xyleborus glabratus Eichhoff) (2). Pondspice (Litsea aestivalis (L.) Fern.) is an obligate wetland shrub listed as endangered in Florida and Maryland and threatened in Georgia (4). On 29 August 2008, 369 of 430 (85%) pondspice trees observed at St. Marks Pond in St. John's County, Florida were dead and/or dying (4). Stem samples were collected from plants with wilted and reddened foliage, entrance holes with boring dust characteristic of ambrosia beetle attack, and dark discoloration in the outer sapwood. Discolored stem sections were surface disinfested for 30 s in a 5% sodium hypochlorite solution and then plated onto cycloheximide streptomycin malt extract agar (1). Smooth, cream-buff, submerge hyphae with uneven margins resembling R. lauricola (2) was observed growing from all sapwood pieces. DNA was extracted from a single isolate (PL 392) and the 18s small subunit rDNA was PCR amplified and sequenced with primers NS1 and NS4 (3), resulting in a 1,026-bp amplicon. A BLASTn search showed identical homology to R. lauricola strain PL 159 (GenBank Accession No. EU257806). The 18s small subunit rDNA sequence was deposited into GenBank (FJ514097). In May 2011, a spore suspension was made by flooding a single-spore culture plate of isolate PL 392 with 2 ml of sterile water, collecting the spores by pipette, and quantification by hemacyometer to 1.5 × 10⁶ spores/ml. Pathogenicity tests were conducted on 1 to 1.5 m tall pondspice plants. Six saplings were wounded by a 3/32-inch drill bit, with four receiving 50 μl of the spore suspension and two serving as water-inoculated controls. All plants were kept in a greenhouse under ambient temperature. Within 21 days, all fungal-inoculated saplings displayed complete canopy wilt, typical of laurel wilt. R. lauricola was later recovered from all four infected plants, completing Koch's postulates. To determine if the vector can reproduce in pondspice, infected stem sections were placed in a plastic rearing box indoors at room temperature, and both callow and mature adult female X. glabratus emerged in October and November 2008. Although laurel wilt has been previously observed on pondspice in South Carolina and Georgia (1), this is the first confirmation of the disease on pondspice in Florida and the first confirmation of the vector from stem material of this host. References: (1) S. W. Fraedrich et al. Plant Dis. 92:215, 2008. (2) T. C. Harrington et al. Mycotaxon 104:399, 2008. (3) M. A. Innis et al. PCR Protocols, A Guide to Methods and Applications. Academic Press. San Diego, CA, 1990. (4) J. A. Surdick and A. M. Jenkins. Pondspice (Litsea aestivalis) Population Status and Response to Laurel Wilt Disease in Northeast Florida. Florida Natural Areas Inventory, Tallahassee, FL, 2009.

Search for supersymmetry at the LHC in events with jets and missing transverse energy

A search for events with jets and missing transverse energy is performed in a data sample of pp collisions collected at √s=7 TeV by the CMS experiment at the LHC. The analyzed data sample corresponds to an integrated luminosity of 1.14 fb(-1). In this search, a kinematic variable α(T) is used as the main discriminator between events with genuine and misreconstructed missing transverse energy. No excess of events over the standard model expectation is found. Exclusion limits in the parameter space of the constrained minimal supersymmetric extension of the standard model are set. In this model, squark masses below 1.1 TeV are excluded at 95% C.L. Gluino masses below 1.1 TeV are also ruled out at 95% C.L. for values of the universal scalar mass parameter below 500 GeV.

Search for new physics with a monojet and missing transverse energy in pp collisions at √s = 7 TeV

A study of events with missing transverse energy and an energetic jet is performed using pp collision data at a center-of-mass energy of 7 TeV. The data were collected by the CMS detector at the LHC, and correspond to an integrated luminosity of 36 pb(-1). An excess of these events over standard model contributions is a signature of new physics such as large extra dimensions and unparticles. The number of observed events is in good agreement with the prediction of the standard model, and significant extension of the current limits on parameters of new physics benchmark models is achieved.

Search for B(s)(0) → μ+ μ- and B(0) → μ+ μ- decays in pp collisions at sqrt[s] = 7 TeV

A search for the rare decays B(s)(0) → μ+ μ- and B(0) → μ+ μ- is performed in pp collisions at sqrt[s] = 7 TeV, with a data sample corresponding to an integrated luminosity of 1.14 fb(-1), collected by the CMS experiment at the LHC. In both cases, the number of events observed after all selection requirements is consistent with expectations from background and standard-model signal predictions. The resulting upper limits on the branching fractions are B(B(s)(0) → μ+ μ-) < 1.9 × 10(-8) and B(B(0) → μ+ μ-)<4.6 × 10(-9), at 95% confidence level.

Measurement of the inclusive jet cross section in pp collisions at √s = 7 TeV

The inclusive jet cross section is measured in pp collisions with a center-of-mass energy of 7 TeV at the Large Hadron Collider using the CMS experiment. The data sample corresponds to an integrated luminosity of 34 pb(-1). The measurement is made for jet transverse momenta in the range 18-1100 GeV and for absolute values of rapidity less than 3. The measured cross section extends to the highest values of jet p(T) ever observed and, within the experimental and theoretical uncertainties, is generally in agreement with next-to-leading-order perturbative QCD predictions.

Search for three-jet resonances in pp collisions at square root(s)=7 TeV

A search for three-jet hadronic resonance production in pp collisions at a center-of-mass energy of 7 TeV has been conducted by the CMS Collaboration at the LHC, using a data sample corresponding to an integrated luminosity of 35  pb(-1). Events with high jet multiplicity and a large scalar sum of jet transverse momenta are analyzed using a signature-based approach. The number of expected standard model background events is found to be in good agreement with the observed events. Limits on the cross section times branching ratio are set in a model of gluino pair production with an R-parity-violating decay to three quarks, and the data rule out such particles within the mass range of 200 to 280  GeV/c2.

Measurement of the t-channel single top quark production cross section in pp collisions at √s=7 TeV

Electroweak production of the top quark is measured for the first time in pp collisions at √=7  TeV, using a data set collected with the CMS detector at the LHC and corresponding to an integrated luminosity of 36  pb⁻¹. With an event selection optimized for t-channel production, two complementary analyses are performed. The first one exploits the special angular properties of the signal, together with background estimates from the data. The second approach uses a multivariate analysis technique to probe the compatibility with signal topology expected from electroweak top-quark production. The combined measurement of the cross section is 83.6±29.8(stat+syst)±3.3(lumi)  pb, consistent with the standard model expectation.

Reversibility of electrowetting on hydrophobic surfaces and dielectrics under continuous applied DC voltage

Various properties of electrowetting such as reversibility, reproducibility and mobility have been investigated experimentally. A conductive water drop on a thin hydrophobic film of amorphous fluropolymers coated on the counter electrode showed unexpectedly the poor reversibility under the discontinuous voltage, so called the contact angle hysteresis. The hysteresis could not been completely suppressed by inserting additionally a thick parylene-C film which has the high dielectric constant and no pinholes. However, both the reversibility and the reproducibility have been enhanced under the continuous voltage starting from the highest absolute electric potential.

First Report of Diplodia corticola Causing Branch Cankers on Live Oak (Quercus virginiana) in Florida

Numerous cankers on small branches showing dieback were observed on live oak (Quercus virginiana) trees in September 2010 in Marion County, FL. Approximately 24 12-year-old landscape trees planted on a farm displayed symptoms. Samples were collected from six of the symptomatic trees and returned to the laboratory for processing. Isolations were made from canker margins after surface sterilization of samples in 2.5% sodium hypochlorite and by plating on potato dextrose agar (PDA). A suspect Botryosphaeriaceae sp. (based on colony morphology) was consistently isolated from the symptomatic branches from all six trees sampled. Fungal colonies consisted of plentiful, white, aerial mycelium that turned dark olive after 5 to 7 days at 23°C with the underside of the cultures turning black (1). Total genomic DNA from three representative Botryosphaeriaceae sp. isolates was extracted and the internal transcribed spacer (ITS1-5.8s-ITS2) region of the rDNA (GenBank Accessions Nos. JF798638, JF798639, and JF798640) using the primers ITS1 and ITS4 (3) and a portion of the β-tubulin gene (Bt), (GenBank Accession Nos. JF798641, JF798642, and JF798641) using the primers Bt2a and Bt2b (2) were amplified, sequenced, and deposited in GenBank. BLASTn searches of the ITS-rDNA sequences resulted in 100% homology (467 of 467, 467 of 467, and 540 of 540, respectively) with Diplodia corticola isolate CBS 112074 (GenBank Accession No. AY268421). BLASTn searches of the Bt sequences resulted in 99, 98, and 99% (391 of 393, 396 of 400, and 392 of 394, respectively) matches with D. corticola strain UCD2397TX, GenBank Accession No. GU294724. To complete Koch's postulates, nine seedlings of Q. virginiana, 0.6 to 0.9 cm in diameter at ground line maintained in a greenhouse, were inoculated with isolate PL949 (GenBank Accession Nos. JF798638 and JF798641) by making a 1.5-cm incision with a single-edge razor blade into the xylem 10 cm above ground line. Inoculations were done by placing mycelial plugs (1 × 0.25 cm) from cultures on PDA in the incision with the mycelium facing the center of the stem. Wounds were sealed by wrapping them with Parafilm. Three negative controls were mock inoculated as previously described except sterile PDA plugs were used. Eight weeks postinoculation, the lengths of the necrotic lesions were measured. Mean lesion length of the inoculated seedlings was 41.2 cm ± SE 4.5 and ranged between 27 and 63 cm. The negative control inoculations showed no necrotic lesions. Three of the inoculated seedlings were plated on PDA in an effort to reisolate the inoculated fungus. D. corticola was reisolated from each and all had the same ITS sequence as D. corticola strain CBS 112074. To our knowledge, this is the first report of D. corticola causing cankers on Q. virginiana and the first report of the disease occurring in Florida. D. corticola has been reported to cause cankers and dieback in several Quercus spp. in Greece, Hungary, Italy, Morocco, Portugal, and Spain and has recently been reported to cause cankers on Q. chrysolepis and Q. agrifolia in California. References: (1) A. Alves et al. Mycologia. 96:598, 2004. (2) N. L. Glass and G. C. Donaldson. Appl. Environ. Microbiol. 61:1323, 1995. (3) T. J. White et al. PCR Protocols: A Guide to Methods and Applications. Academic Press, San Diego, 1990.

Indications of suppression of excited Υ states in Pb-Pb collisions at √(s(NN))=2.76 TeV

A comparison of the relative yields of Υ resonances in the μ(+)μ(-) decay channel in Pb-Pb and pp collisions at a center-of-mass energy per nucleon pair of 2.76 TeV is performed with data collected with the CMS detector at the LHC. Using muons of transverse momentum above 4  GeV/c and pseudorapidity below 2.4, the double ratio of the Υ(2S) and Υ(3S) excited states to the Υ(1S) ground state in Pb-Pb and pp collisions, [Υ(2S+3S)/Υ(1S)](Pb-Pb)/[Υ(2S+3S)/Υ(1S)](pp), is found to be 0.31(-0.15)(+0.19)(stat)±0.03(syst). The probability to obtain the measured value, or lower, if the true double ratio is unity, is calculated to be less than 1%.

Measurement of the polarization of W bosons with large transverse momenta in W + jets events at the LHC

A first measurement of the polarization of W bosons with large transverse momenta in pp collisions is presented. The measurement is based on 36 pb⁻¹ of data recorded at √s = 7 TeV by the CMS detector at the LHC. The left-handed, right-handed, and longitudinal polarization fractions (f(L), f(R), and f₀, respectively) of W bosons with transverse momenta larger than 50 GeV are determined by using decays to both electrons and muons. The muon final state yields the most precise measurement: (f(L) - f(R))⁻ = 0.240 ± 0.036(stat) ± 0.031(syst) and f₀⁻ = 0.183 ± 0.087(stat) ± 0.123(syst) for negatively charged W bosons and (f(L) - f(R))⁺ = 0.310 ± 0.036(stat) ± 0.017(syst) and f₀⁺ = 0.171 ± 0.085(stat) ± 0.099(syst) for positively charged W bosons. This establishes, for the first time, that W bosons produced in pp collisions with large transverse momenta are predominantly left-handed, as expected in the standard model.

Nano-scaled Pt/Ag/Ni/Au contacts on p-type GaN for low contact resistance and high reflectivity

We synthesized the vertical-structured LED (VLED) using nano-scaled Pt between p-type GaN and Ag-based reflector. The metallization scheme on p-type GaN for high reflectance and low was the nano-scaled Pt/Ag/Ni/Au. Nano-scaled Pt (5 A) on Ag/Ni/Au exhibited reasonably high reflectance of 86.2% at the wavelength of 460 nm due to high transmittance of light through nano-scaled Pt (5 A) onto Ag layer. Ohmic behavior of contact metal, Pt/Ag/Ni/Au, to p-type GaN was achieved using surface treatments of p-type GaN prior to the deposition of contact metals and the specific contact resistance was observed with decreasing Pt thickness of 5 A, resulting in 1.5 x 10(-4) ohms cm2. Forward voltages of Pt (5 A)/Ag/Ni contact to p-type GaN showed 4.19 V with the current injection of 350 mA. Output voltages with various thickness of Pt showed the highest value at the smallest thickness of Pt due to its high transmittance of light onto Ag, leading to high reflectance. Our results propose that nano-scaled Pt/Ag/Ni could act as a promising contact metal to p-type GaN for improving the performance of VLEDs.

Performance of GaN vertical light emitting diodes using wafer bonding process with Al-alloyed graphite substrate

We report on the vertical-structure light emitting diodes (VLEDs) fabricated with wafer bonding method using Al-alloyed graphite and Si supporter. VLEDs with Al-alloyed graphite produced no crack during/after laser lift-off (LLO) techniques while the wafer crack took place using Si supporter because of the difference of thermal expansion coefficients between Si and sapphire. The performance of VLEDs with wafer bonding method using Al-alloyed graphite supporter was compared to those fabricated by Cu plating methods. The output power of the chips with wafer bonding method was nearly same as the one with Cu-plating method. However, the forward voltage of VLEDs with wafer bonding method was higher than those with Cu-plating method. In the terms of reliabilities the wafer bonding process is more preferable to Cu-plating and our report proposes that Al-alloyed graphite could be one of promising candidates for the supporters in wafer bonding process.

Measurement of the B0 production cross section in pp collisions at sqrt[s] = 7 TeV

Measurements of the differential production cross sections dσ/dpTB and dσ/dyB for B0 mesons produced in pp collisions at sqrt[s] = 7 TeV are presented. The data set used was collected by the CMS experiment at the LHC and corresponds to an integrated luminosity of 40 pb-1. The production cross section is measured from B0 meson decays reconstructed in the exclusive final state J/ψKS0, with the subsequent decays J/ψ → μ + μ - and KS0 → π+}π-. The total cross section for pTB>5 GeV and |yB|<2.2 is measured to be 33.2 ± 2.5 ± 3.5 μb, where the first uncertainty is statistical and the second is systematic.

Search for neutral minimal supersymmetric standard model Higgs bosons decaying to tau pairs in pp collisions at √s=7 TeV

A search for neutral minimal supersymmetric standard model (MSSM) Higgs bosons in pp collisions at the LHC at a center-of-mass energy of 7 TeV is presented. The results are based on a data sample corresponding to an integrated luminosity of 36  pb(-1) recorded by the CMS experiment. The search uses decays of the Higgs bosons to tau pairs. No excess is observed in the tau-pair invariant-mass spectrum. The resulting upper limits on the Higgs boson production cross section times branching fraction to tau pairs, as a function of the pseudoscalar Higgs boson mass, yield stringent new bounds in the MSSM parameter space.

Search for supersymmetry in pp collisions at √7 TeV in events with two photons and missing transverse energy

A search for supersymmetry in the context of general gauge-mediated breaking with the lightest neutralino as the next-to-lightest supersymmetric particle and the gravitino as the lightest is presented. The data sample corresponds to an integrated luminosity of 36 pb(-1) recorded by the CMS experiment at the LHC. The search is performed by using events containing two or more isolated photons, at least one hadronic jet, and significant missing transverse energy. No excess of events at high missing transverse energy is observed. Upper limits on the signal cross section for general gauge-mediated supersymmetry between 0.3 and 1.1 pb at the 95% confidence level are determined for a range of squark, gluino, and neutralino masses, excluding supersymmetry parameter space that was inaccessible to previous experiments.

Patterned immobilization of biomolecules on a polymer surface functionalized by radiation grafting

Patterned graft polymerization of a functional monomer on a hydrophobic polymer surface was proposed for biomolecule patterning. A poly(vinylidene fluoride) (PVDF) film surface was selectively activated by ion implantation through a pattern mask and acrylic acid (AA) was then graft polymerized onto the activated regions of the PVDF surfaces. The peroxide concentration on the implanted surface depended on the fluence, which had a considerable effect on the grafting degree of AA. Afterwards, amine-functionalized biotin and probe DNA were immobilized on the poly(acrylic acid)-grafted regions of the PVDF surfaces. Specific binding of biotin with streptavidin and hybridization of probe DNA with complimentary DNA proved successful protein and DNA patterning and well-defined 50 microm dot-type patterns of the streptavidin and DNA were obtained. These results confirmed the potential of this strategy for patterning of various biomolecules.

Secondary ion mass spectrometry study of thermal diffusion of Au nanoparticles in porous SiO2 matrices

Migration of Au nanoparticles by thermal diffusion into porous SiO2 matrix substrates has been studied using secondary ion mass spectroscopy (SIMS). When the samples having four different porosities were annealed at T = 410 K for 1.5 h, no noticeable variations in the thermal diffusion of Au nanoparticles were observed. All the measured diffusion coefficients of Au particles, were an order of 10(-15) cm2/s at 300-410 K in a very limited interfacial region. Regardless of their porosities, the pores must be discontinuous, which acts as a diffusion barrier to block the continuous diffusion of Au particles.

Influence of charge densities of randomly sulfonated polystyrene surfaces on cell attachment and proliferation

Attachment and proliferation of NIH-3T3 fibroblast cells on random polymer surfaces, polystyrene sulfonated acid (PSSAx) with five different degrees of sulfonation (x = 0%, 5%, 10%, 15% and 33%) and on a tissue culture polystyrene (TCPS) surface were studied. The surface properties, wettability and roughness were measured by water-contact angle and atomic force microscopy measurement. The wettability and surface roughness increased with increasing the content of sulfonic acid groups on the surfaces. The number of cells attached on the surface after seeding increased with increasing x and reached to the maximum value on PSSA15. The cell proliferation also increased with increasing x. However, cell proliferation was slow down on PSSA33 in comparison to PSSA10 and PSSA15 surfaces after 48 h culture.

The structure and the percolation behavior of a mixture of carbon nanotubes and molecular junctions: a Monte Carlo simulation study

The structure and the percolation behavior of the composite of carbon nanotubes (CNTs), CNT molecular junctions and polymers are studied using Monte Carlo (MC) simulations. We model a CNT as a rigid rod composed of hard spheres. "X" and "Y" molecular junctions of CNTs are constructed by joining four and three segments of CNTs, respectively. The model system consists of CNTs mixed with either "X" or "Y" molecular junctions. The system is equilibrated using Monte Carlo simulations and the equilibrated configurations are used to locate the clusters of connected molecules via a recursive algorithm. The fraction (P(perc)) of configurations with a percolating cluster is then estimated for a given total volume fraction (phi(t)) of molecules. When P(perc) reaches 0.5, phi(t) of the system is considered a percolation threshold concentration (phi(c)). The percolation behavior is found to be sensitive to the aspect ratio of CNTs and the concentration and the shape of molecular junctions. phi(c) is decreased with an increase in the aspect ratio of CNTs. As the mole fraction of molecular junctions is increased, phi(c) is decreased significantly, which suggests that molecular junctions could enhance the electric conductivity of CNT-polymer composites. X junctions are found to construct a percolating network more effectively than Y junctions. More interestingly, even though molecular junctions change the percolation behavior significantly, the site-site pair correlation functions of CNTs hardly show any difference as the mole fraction of molecular junctions is increased. This implies that the percolation of CNTs is determined by the subtle many-body correlation of CNTs that is not captured by the site-site pair correlation functions.

Organoclay Nanoplatelets at the Air/water Interface

We have demonstrated that films of single clay platelets can be produced by the Langmuir technique where a solution of organoclay particles dissolved in xylene was spread at the air water interface. The total thickness of the layer was found to be 21 ± 3Å which is in good agreement with previous X-ray diffraction data. Scanning probe microscopy showed the individual platelets to be rectangular in shape with an aspect ratio in excess of 100 to 1 and of uniform organic surfactant coverage.

Search for quark compositeness with the dijet centrality ratio in pp collisions at √s=7 TeV

A search for quark compositeness in the form of quark contact interactions, based on hadronic jet pairs (dijets) produced in proton-proton collisions at √s=7 TeV, is described. The data sample of the study corresponds to an integrated luminosity of 2.9 pb(-1) collected with the CMS detector at the LHC. The dijet centrality ratio, which quantifies the angular distribution of the dijets, is measured as a function of the invariant mass of the dijet system and is found to agree with the predictions of the standard model. A statistical analysis of the data provides a lower limit on the energy scale of quark contact interactions. The sensitivity of the analysis is such that the expected limit is 2.9 TeV; because the observed value of the centrality ratio at high invariant mass is below the expectation, the observed limit is 4.0 TeV at the 95% confidence level.

Search for dijet resonances in 7 TeV pp collisions at CMS

A search for narrow resonances in the dijet mass spectrum is performed using data corresponding to an integrated luminosity of 2.9 pb⁻¹ collected by the CMS experiment at the Large Hadron Collider. Upper limits at the 95% confidence level are presented on the product of the resonance cross section, branching fraction into dijets, and acceptance, separately for decays into quark-quark, quark-gluon, or gluon-gluon pairs. The data exclude new particles predicted in the following models at the 95% confidence level: string resonances, with mass less than 2.50 TeV, excited quarks, with mass less than 1.58 TeV, and axigluons, colorons, and E6 diquarks, in specific mass intervals. This extends previously published limits on these models.

First measurement of Bose-Einstein correlations in proton-proton collisions at √s=0.9 and 2.36 TeV at the LHC

Bose-Einstein correlations have been measured using samples of proton-proton collisions at 0.9 and 2.36 TeV center-of-mass energies, recorded by the CMS experiment at the CERN Large Hadron Collider. The signal is observed in the form of an enhancement of pairs of same-sign charged particles with small relative four-momentum. The size of the correlated particle emission region is seen to increase significantly with the particle multiplicity of the event.

Transverse-momentum and pseudorapidity distributions of charged hadrons in pp collisions at square root of s = 7 TeV

Charged-hadron transverse-momentum and pseudorapidity distributions in proton-proton collisions at square root of s = 7  TeV are measured with the inner tracking system of the CMS detector at the LHC. The charged-hadron yield is obtained by counting the number of reconstructed hits, hit pairs, and fully reconstructed charged-particle tracks. The combination of the three methods gives a charged-particle multiplicity per unit of pseudorapidity dN(ch)/dη|(|η|<0.5) = 5.78 ± 0.01(stat) ± 0.23(syst) for non-single-diffractive events, higher than predicted by commonly used models. The relative increase in charged-particle multiplicity from square root of s = 0.9 to 7 TeV is [66.1 ± 1.0(stat) ± 4.2(syst)]%. The mean transverse momentum is measured to be 0.545 ± 0.005(stat) ± 0.015(syst)  GeV/c. The results are compared with similar measurements at lower energies.