Biomimetically Reinforced Polyvinyl Alcohol-Based Hybrid Scaffolds for Cartilage Tissue Engineering

Articular cartilage has a very limited regeneration capacity. Therefore, injury or degeneration of articular cartilage results in an inferior mechanical stability, load-bearing capacity, and lubrication capability. Here, we developed a biomimetic scaffold consisting of macroporous polyvinyl alcohol (PVA) sponges as a platform material for the incorporation of cell-embedded photocrosslinkable poly(ethylene glycol) diacrylate (PEGDA), PEGDA-methacrylated chondroitin sulfate (PEGDA-MeCS; PCS), or PEGDA-methacrylated hyaluronic acid (PEGDA-MeHA; PHA) within its pores to improve in vitro chondrocyte functions and subsequent in vivo ectopic cartilage tissue formation. Our findings demonstrated that chondrocytes encapsulated in PCS or PHA and loaded into macroporous PVA hybrid scaffolds maintained their physiological phenotypes during in vitro culture, as shown by the upregulation of various chondrogenic genes. Further, the cell-secreted extracellular matrix (ECM) improved the mechanical properties of the PVA-PCS and PVA-PHA hybrid scaffolds by 83.30% and 73.76%, respectively, compared to their acellular counterparts. After subcutaneous transplantation in vivo, chondrocytes on both PVA-PCS and PVA-PHA hybrid scaffolds significantly promoted ectopic cartilage tissue formation, which was confirmed by detecting cells positively stained with Safranin-O and for type II collagen. Consequently, the mechanical properties of the hybrid scaffolds were biomimetically reinforced by 80.53% and 210.74%, respectively, compared to their acellular counterparts. By enabling the recapitulation of biomimetically relevant structural and functional properties of articular cartilage and the regulation of in vivo mechanical reinforcement mediated by cell⁻matrix interactions, this biomimetic material offers an opportunity to control the desired mechanical properties of cell-laden scaffolds for cartilage tissue regeneration.

Transdermal iontophoresis patch with reverse electrodialysis

Reverse electrodialysis (RED) technology generates energy from the salinity gradient by contacting waters with different salinity. Herein, we develop the disposable skin patch using this eco-friendly energy. The current density, which can be controlled easily without special circuit, is enough to iontophoretic drug delivery. In vitro study, this iontophoretic system enhanced the transdermal delivery of peptide, which is difficult to penetrate the skin barrier by simple diffusion. We design the disposable iontophoretic skin patch using RED system and suggest this patch can be apply on new cosmetic patch or disposable drug patch.

Chondroitin Sulfate-Based Biomineralizing Surface Hydrogels for Bone Tissue Engineering

Chondroitin sulfate (CS) is the major component of glycosaminoglycan in connective tissue. In this study, we fabricated methacrylated PEGDA/CS-based hydrogels with varying CS concentration (0, 1, 5, and 10%) and investigated them as biomineralizing three-dimensional scaffolds for charged ion binding and depositions. Due to its negative charge from the sulfate group, CS exhibited an osteogenically favorable microenvironment by binding charged ions such as calcium and phosphate. Particularly, ion binding and distribution within negatively charged hydrogel was dependent on CS concentration. Furthermore, CS dependent biomineralizing microenvironment induced osteogenic differentiation of human tonsil-derived mesenchymal stem cells in vitro. Finally, when we transplanted PEGDA/CS-based hydrogel into a critical sized cranial defect model for 8 weeks, 10% CS hydrogel induced effective bone formation with highest bone mineral density. This PEGDA/CS-based biomineralizing hydrogel platform can be utilized for in situ bone formation in addition to being an investigational tool for in vivo bone mineralization and resorption mechanisms.

Optical spectroscopic imaging for cell therapy and tissue engineering

Cell-based therapies hold great potential to treat a wide range of human diseases, yet the mechanisms responsible for cell migration and homing are not fully understood. Emerging molecular imaging technology enables in vivo tracking of transplanted cells and their therapeutic efficacy, which together will improve the clinical outcome of cell-based therapy. Particularly, optical imaging provides highly sensitive, safe (non-radioactive), cost-effective, and fast solutions for real-time cellular trafficking compared to other conventional molecular imaging modalities. This review provides a comprehensive overview of current advances in optical imaging for cell-based therapy and tissue engineering. We discuss different types of fluorescent probes and their labeling methods with a special focus on cardiovascular disease, cancer immunotherapy, and tissue regeneration. In addition, advantages and limitations of optical imaging-based cell tracking strategies along with the future perspectives to translate this imaging technique for a clinical realm are discussed.

Chondrogenically primed tonsil-derived mesenchymal stem cells encapsulated in riboflavin-induced photocrosslinking collagen-hyaluronic acid hydrogel for meniscus tissue repairs

Current meniscus tissue repairing strategies involve partial or total meniscectomy, followed by allograft transplantation or synthetic material implantation. However, allografts and synthetic implants have major drawbacks such as the limited supply of grafts and lack of integration into host tissue, respectively. In this study, we investigated the effects of conditioned medium (CM) from meniscal fibrochondrocytes and TGF-β3 on tonsil-derived mesenchymal stem cells (T-MSCs) for meniscus tissue engineering. CM-expanded T-MSCs were encapsulated in riboflavin-induced photocrosslinked collagen-hyaluronic acid (COL-RF-HA) hydrogels and cultured in chondrogenic medium containing TGF-β3. In vitro results indicate that CM-expanded cells followed by TGF-β3 exposure stimulated the expression of fibrocartilage-related genes (COL2, SOX9, ACAN, COL1) and production of extracellular matrix components. Histological assessment of in vitro and subcutaneously implanted in vivo constructs demonstrated that CM-expanded cells followed by TGF-β3 exposure resulted in highest cell proliferation, GAG accumulation, and collagen deposition. Furthermore, when implanted into meniscus defect model, CM treatment amplified the potential of TGF-β3 and induced complete regeneration.

STATEMENT OF SIGNIFICANCE

Conditioned medium derived from chondrocytes have been reported to effectively prime mesenchymal stem cells toward chondrogenic lineage. Type I collagen is the main component of meniscus extracellular matrix and hyaluronic acid is known to promote meniscus regeneration. In this manuscript, we investigated the effects of conditioned medium (CM) and transforming growth factor-β3 (TGF-β3) on tonsil-derived mesenchymal stem cells (T-MSCs) encapsulated in riboflavin-induced photocrosslinked collagen-hyaluronic acid (COL-RF-HA) hydrogel. We employed a novel source of conditioned medium, derived from meniscal fibrochondrocytes. Our in vitro and in vivo results collectively illustrate that CM-expanded cells followed by TGF-β3 exposure have the best potential for meniscus regeneration. This manuscript highlights a novel stem cell commitment strategy combined with biomaterials designs for meniscus regeneration.

Hydrogel Functionalized Janus Membrane for Skin Regeneration

In this study, a hydrogel functionalized Janus membrane is developed and its capacity is examined as a wound dressing biomaterial. A hydrophobic fluoropolymer, poly(3,3,4,4,5,5,6,6,7,7,8,8,9,9,10,10,10-heptadecafluorodecyl methacrylate) (PHFDMA), is uniformly coated onto macroporous polyester membrane through initiated chemical vapor deposition process on both sides. PHFDMA-coated macroporous membrane exhibits antibacterial property, allows air permeation, and inhibits water penetration. Janus membrane property is obtained by exposing one side of PHFDMA coated membrane with 1 m KOH solution, which allows PHFDMA cleavage resulting in carboxylic acid residue. This carboxylic acid residue is then further functionalized with gelatin methacrylate-based photocrosslinkable hydrogel for moisture retention and growth factor release. When applied to full thickness dorsal skin defect model, functionalized hydrogel allows moisture retention and hydrophobic surface prevents exudate leaks via water repellence. Furthermore, hydrogel functionalized Janus membrane enhances the wound healing rate and induces thick epidermal layer formation. In conclusion, the multifunctional Janus membrane with hydrophobic outer surface and immobilized hydrogel on the other surface is fabricated for an innovative strategy for wound healing.

Optical High Content Nanoscopy of Epigenetic Marks Decodes Phenotypic Divergence in Stem Cells

While distinct stem cell phenotypes follow global changes in chromatin marks, single-cell chromatin technologies are unable to resolve or predict stem cell fates. We propose the first such use of optical high content nanoscopy of histone epigenetic marks (epi-marks) in stem cells to classify emergent cell states. By combining nanoscopy with epi-mark textural image informatics, we developed a novel approach, termed EDICTS (Epi-mark Descriptor Imaging of Cell Transitional States), to discern chromatin organizational changes, demarcate lineage gradations across a range of stem cell types and robustly track lineage restriction kinetics. We demonstrate the utility of EDICTS by predicting the lineage progression of stem cells cultured on biomaterial substrates with graded nanotopographies and mechanical stiffness, thus parsing the role of specific biophysical cues as sensitive epigenetic drivers. We also demonstrate the unique power of EDICTS to resolve cellular states based on epi-marks that cannot be detected via mass spectrometry based methods for quantifying the abundance of histone post-translational modifications. Overall, EDICTS represents a powerful new methodology to predict single cell lineage decisions by integrating high content super-resolution nanoscopy and imaging informatics of the nuclear organization of epi-marks.

Graphene oxide reinforced hydrogels for osteogenic differentiation of human adipose-derived stem cells

In this study, we designed graphene oxide-functionalized polyethylene glycol diacrylate hydrogels to assign cell adhesion-dependent biofunctionality, which resulted in cell adhesion dependent osteogenic differentiation of encapsulated stem cells.

Riboflavin-induced photo-crosslinking of collagen hydrogel and its application in meniscus tissue engineering

A meniscus tear is a common knee injury, but its regeneration remains a clinical challenge. Recently, collagen-based scaffolds have been applied in meniscus tissue engineering. Despite its prevalence, application of natural collagen scaffold in clinical setting is limited due to its extremely low stiffness and rapid degradation. The purpose of the present study was to increase the mechanical properties and delay degradation rate of a collagen-based scaffold by photo-crosslinking using riboflavin (RF) and UV exposure. RF is a biocompatible vitamin B2 that showed minimal cytotoxicity compared to conventionally utilized photo-initiator. Furthermore, collagen photo-crosslinking with RF improved mechanical properties and delayed enzyme-triggered degradation of collagen scaffolds. RF-induced photo-crosslinked collagen scaffolds encapsulated with fibrochondrocytes resulted in reduced scaffold contraction and enhanced gene expression levels for the collagen II and aggrecan. Additionally, hyaluronic acid (HA) incorporation into photo-crosslinked collagen scaffold showed an increase in its retention. Based on these results, we demonstrate that photo-crosslinked collagen-HA hydrogels can be potentially applied in the scaffold-based meniscus tissue engineering.

Construction of 3-D Cellular Multi-Layers with Extracellular Matrix Assembly Using Magnetic Nanoparticles

Construction of 3-dimensional (3-D) engineered tissue is increasingly being investigated for use in drug discovery and regenerative medicine. Here, we developed multi-layered 3-D cellular assembly by using magnetic nanoparticles (MNP) isolated from Magnetospirillum sp. AMB-1 magnetotactic bacteria. Magnetized human dermal fibroblasts (HDFBs) were prepared by treatment with the MNP, induced to form 3-D assembly under a magnetic field. Analyses including LIVE/DEAD assay, transmission electron microscopy revealed that the MNP were internalized via clathrin-mediated endocytosis without cytotoxicity. The magnetized HDFBs could build 3-D structure as a function of seeding density. When the highest seeding density (5 × 105 cells/mm2 was used, the thickness of assembly was 41.90 ± 1.69 μm, with approximately 9.3 ± 1.6 cell layers being formed. Immunofluorescence staining confirmed homogeneous distribution of ECM and junction proteins throughout the 3-D assembly. Real-time PCR analysis showed decrease in expression levels of collagen types I and IV but increase in that of connexin 43 in the 3-D assembly compared with the 2-D culture. Finally, we demonstrated that the discernible layers can be formed hierarchically by serial assembly. In conclusion, our study showed that a multi-layered structure can be easily prepared using magnetically-assisted cellular assembly with highlighting cell-cell and cell-ECM communication.

Biomedical therapy using synthetic WKYMVm hexapeptide

WKYMVm hexapeptide has been identified as a strong FPR2 agonist through a library screening of synthetic peptides. The FPR2 has been reported to play a crucial role in inflammation and angiogenic responses via stimulation of chemotaxis, migration, cell proliferation, wound healing and vessel growth. Recently, the therapeutic effects of WKYMVm have been reported in various disease models. In cutaneous wound model in diabetic mice, WKYMVm facilitated wound healing processes by stimulating the formation of capillary and arteriole and re-epithelialization. In coronary artery stenosis model, WKYMVm coating on stent promoted re-endothelialization and lowered restenosis rate. In hindlimb ischemia mouse model, intramuscular injection of WKYMVm promoted homing of exogenously transplanted endothelial colony-forming cells and neovascularization, resulting in salvaging hindlimb. Furthermore, a single injection of WKYMVm encapsulated in poly (lactide-co-glycolide) microspheres was demonstrated to be as efficient as multiple injections of WKYMVm in restoring blood flow in hindlimb ischemia model. These observations may open up promising biomedical applications of WKYMVm for tissue repairs and regenerations.

High throughput approaches for controlled stem cell differentiation

Stem cells have unique ability to undergo self-renewal indefinitely in culture and potential to differentiate into almost all cell types in the human body. However, the developing a method for efficiently differentiating or manipulating these stem cells for therapeutic purposes remains a challenging problem. Pluripotent stem cells, as well as adult stem cells, require biological cues for their proliferation and differentiation. These cues are largely controlled by cell-cell, cell-insoluble factors (such as extracellular matrix), and cell-soluble factors (such as cytokine or growth factors) interactions. In this review, we describe a state of research on various stem cell-based tissue engineering applications and high throughput strategies for developing synthetic or biosynthetic microenvironments to allow efficient commitments in stem cells.

STATEMENT OF SIGNIFICANCE

Nowadays, pluripotency of stem cells have received much attention to use therapeutic purpose. However, a major difficulty with stem cell therapy is to control its differentiation through desired cells or tissues. In other words, various microenvironment factors are involved during stem cell differentiation, including dimensionality, growth factors, cell junctions, nutritional status, matrix stiffness, matrix composition, mechanical stress, and cell-matrix adhesion. Therefore, researchers have engineered a variety of platforms to enable controlling and monitoring bioactive factors to induce stem cell commitment. In this review, we report on recent advancements in a novel technology based on high-throughput strategies for stem cell-based tissue engineering applications.

In Vitro and In Vivo Evaluation of Whitlockite Biocompatibility: Comparative Study with Hydroxyapatite and β-Tricalcium Phosphate

Biomimicking ceramics have been developed to induce efficient recovery of damaged hard tissues. Among them, calcium phosphate-based bioceramics have been the most widely used because of their similar composition with human hard tissue and excellent biocompatibilities. However, the incomplete understanding of entire inorganic phases in natural bone has limited the recreation of complete bone compositions. In this work, broad biomedical evaluation of whitlockite (WH: Ca18Mg2(HPO4)2(PO4)12), which is the secondary inorganic phase in bone, is conducted to better understand human hard tissue and to seek potential application as a biomaterial. Based on the recently developed gram-scale method for synthesizing WH nanoparticles, the properties of WH as a material for cellular scaffolding and bone implants are assessed and compared to those of hydroxyapatite (HAP: Ca10(PO4)6(OH)2) and β-tricalcium phosphate (β-TCP: β-Ca3(PO4)2). WH-reinforced composite scaffolds facilitate bone-specific differentiation compared to HAP-reinforced composite scaffolds. Additionally, WH implants induce similar or better bone regeneration in calvarial defects in a rat model compared to HAP and β-TCP implants, with intermediate resorbability. New findings of the properties of WH that distinguish it from HAP and β-TCP are significant in understanding human hard tissue, mimicking bone tissue at the nanoscale and designing functional bioceramics.

Non-viral approaches for direct conversion into mesenchymal cell types: Potential application in tissue engineering

Acquiring adequate number of cells is one of the crucial factors to apply tissue engineering strategies in order to recover critical-sized defects. While the reprogramming technology used for inducing pluripotent stem cells (iPSCs) opened up a direct path for generating pluripotent stem cells, a direct conversion strategy may provide another possibility to obtain desired cells for tissue engineering. In order to convert a somatic cell into any other cell type, diverse approaches have been investigated. Conspicuously, in contrast to traditional viral transduction method, non-viral delivery of conversion factors has the merit of lowering immune responses and provides safer genetic manipulation, thus revolutionizing the generation of directly converted cells and its application in therapeutics. In addition, applying various microenvironmental modulations have potential to ameliorate the conversion of somatic cells into different lineages. In this review, we discuss the recent progress in direct conversion technologies, specifically focusing on generating mesenchymal cell types.

Physical Stimuli-Induced Chondrogenic Differentiation of Mesenchymal Stem Cells Using Magnetic Nanoparticles

Chondrogenic commitments of mesenchymal stem cells (MSCs) require 3D cellular organization. Furthermore, recent progresses in bioreactor technology have contributed to the development of various biophysical stimulation platforms for efficient cartilage tissue formation. Here, an approach is reported to drive 3D cellular organization and enhance chondrogenic commitment of bone-marrow-derived human mesenchymal stem cells (BM-hMSCs) via magnetic nanoparticle (MNP)-mediated physical stimuli. MNPs isolated from Magnetospirillum sp. AMB-1 are endocytosed by the BM-hMSCs in a highly efficient manner. MNPs-incorporated BM-hMSCs are pelleted and then subjected to static magnetic field and/or magnet-derived shear stress. Magnetic-based stimuli enhance level of sulfated glycosaminoglycan (sGAG) and collagen synthesis, and facilitate the chondrogenic differentiation of BM-hMSCs. In addition, both static magnetic field and magnet-derived shear stress applied for the chondrogenic differentiation of BM-hMSCs do not show increament of hypertrophic differentiation. This MNP-mediated physical stimulation platform demonstrates a promising strategy for efficient cartilage tissue engineering.

Multifunctional cell-culture platform for aligned cell sheet monitoring, transfer printing, and therapy

While several functional platforms for cell culturing have been proposed for cell sheet engineering, a soft integrated system enabling in vitro physiological monitoring of aligned cells prior to their in vivo applications in tissue regeneration has not been reported. Here, we present a multifunctional, soft cell-culture platform equipped with ultrathin stretchable nanomembrane sensors and graphene-nanoribbon cell aligners, whose system modulus is matched with target tissues. This multifunctional platform is capable of aligning plated cells and in situ monitoring of cellular physiological characteristics during proliferation and differentiation. In addition, it is successfully applied as an in vitro muscle-on-a-chip testing platform. Finally, a simple but high-yield transfer printing mechanism is proposed to deliver cell sheets for scaffold-free, localized cell therapy in vivo. The muscle-mimicking stiffness of the platform allows the high-yield transfer printing of multiple cell sheets and results in successful therapies in diseased animal models. Expansion of current results to stem cells will provide unique opportunities for emerging classes of tissue engineering and cell therapy technologies.