Hemodynamic evaluation of embolic trajectory in an arterial bifurcation: an in-vitro experimental model

BACKGROUND AND PURPOSE

Despite the importance of embolism as a major cause of brain infarction, little is known about the hemodynamic factors governing the path large emboli tend to follow. Our aim was to test in vitro, whether hemodynamic parameters other than flow ratios between bifurcation branches may affect the distribution of embolic particles in a Y-shaped bifurcation model, used as an analogue to an arterial bifurcation.

METHODS

In vitro experiments were conducted using suspensions of sphere-shaped particles (0.6, 1.6, and 3.2 mm) in water-glycerin mixture, using steady and pulsatile laminar flow regimes in a Y-shaped bifurcation model (identical branching angles [theta1=theta2=45 degrees] with one daughter branch diameter wider than the other [D1=6 mm, D2=4 mm]; average Reynolds number 500).

RESULTS

Experiments using naturally buoyant particles under steady flow conditions and four outlet-flow ratios revealed that small (0.6 mm) and mid-sized (1.6 mm) particles entered into either the narrower or wider bifurcation daughter branch nonpreferentially, proportionally to the flow ratios. Large particles (3.2 mm), however, preferentially entered the wider daughter branch. Moreover, as the flow ratio increases this phenomenon was augmented. Further experiments revealed that the preference of the wider daughter branch for high particle-to-branch diameter-ratios further increases under pulsatile flow and by the density ratio between particles and fluid.

CONCLUSIONS

Particles' distribution in a bifurcation is affected, beyond its outlets-flow-ratios, by the particle-to-branch diameter-ratio. The tendency of large particles to preferentially enter the wider bifurcation branch, beyond the flow ratio, is augmented under pulsatile flow conditions and is affected by particle-to-fluid density-ratio. These findings may have important implications for understanding the hemodynamic mechanisms underlying the trajectory of large emboli.

Adhesion molecule expression by osteogenic cells cultured on various biodegradable scaffolds

Design of tissue-engineered cell-loaded device involves cells seeding onto scaffolds in vitro, allowing them to settle and grow before in vivo transplantation. Interaction between scaffold and cells is important in the development of desired tissues. The present study aimed to investigate the effect of cell-polymer interactions on cell morphology and expression of surface markers of osteogenic MBA-15 cells cultured on various bioresorbable polymers. In this study, we used various polymers: poly(L-lactic acid) (PLLA), poly(DL-lactic acid) (PDLLA), poly(L-lactic-glycolic acid) (PLGA), and poly(DL-lactide-glycolide acid) PDLGA1 and PDLGA2. Expression of integrinalpha-M (CD11b), selectin-E (CD62E), and PECAM-1 (CD31), important in cell-cell and cell-matrix interactions, were quantified by flow-cytometry analysis. Cells grown on PDLGA1 films demonstrated fivefold increase in CD62E expression and two-folds increase in CD11b expression. None of the polymers affected the levels of CD31. Identified differential effect of polymers on the expression of cell-adhesion molecules by osteoprogenitors in vitro might help to choose optimal parameters for successful engraftment of cell-loaded constructs.

The Cardiocoil Stent-Artery Interaction

An analytical approach for the mechanical interaction of the self-expanding Cardiocoil stent with the stenosed artery is presented. The damage factor as the contact stress at the stent-artery interface is determined. The stent is considered as an elastic helical rod having a nonlinear pressure-displacement dependence, while the artery is modeled by an elastic cylindrical shell. An influence of a moderate relative thickness of the shell is estimated. The equations for both the stent and the artery are presented in the stent-associated helical coordinates. The computational efficiency of the model enabled to carry out a parametric study of the damage factor. Comparative examinations are conducted for the stents made of the helical rods with circular and rectangular cross sections. It was found, in particular, that, under same other conditions, the damage factor for the stent with a circular cross section may be two times larger than that for a rectangular one.

Dynamics of Blood Flow and Platelet Transport in Pathological Vessels

Arterial disease, characterized by arterial occlusion (stenosis), is a leading cause of cardiovascular diseases and a major healthcare problem in the Western world. One of the main mechanisms leading to vessel occlusion is thrombus formation, which may be initiated by platelet activation. Shear rates and flow patterns (fluid dynamics factors) and concentration of coagulation factors and platelet agonists (biological factors) modulate platelet function and may lead to platelet activation and aggregation. Here, we examine the flow-induced mechanisms leading to platelet activation in models of stenosed coronary vessels. Experimental and numerical methods were used to investigate and characterize the influence of the flow field on platelet activation. As it passes through pathological geometries characteristic of arterial stenosis, a platelet is exposed to varying levels of shear stress. The cumulative effect of the shear stress level and the duration of the platelet's exposure to it determine whether the platelet is brought beyond its activation threshold. Stress histories of individual platelets can be tracked within the flow field to locate the regions where activated platelets might be found and subsequently aggregate and/or adhere to the wall.

Effects of contact-induced membrane stiffening on platelet adhesion

The adhesion of platelets plays an essential role in thrombogenesis. Adhesion occurs at sites called focal adhesions (FA), where cell-membrane receptors bind specifically to substrate proteins and couple to each other and to the cytoskeleton via various cellular proteins. The resulting molecular structure suggests that the cortex stiffens at the FA, which likely affects platelet adhesion. This hypothesis is explored by structural analysis and parametric investigation. The cortex is modeled as a shell anchored to the substrate by adhesion forces and subjected to a detachment force. Equilibrium considerations result in a non-linear, two-point boundary value problem that is solved numerically. The results show that cortex stiffening significantly influences the force required for detachment as well as the cell-membrane internal stresses. The magnitude of these effects depends on the ratio of adhesion-to-bending energies and on the inclination of the detachment force. Because the cortex stiffening depends on cellular events, these results suggest a possible mechanism by which platelets can control their adhesion and protect themselves from damage.

Characterization of arterial stenosis and elasticity by analysis of high-frequency pressure wave components

We describe a novel method for assessing stenosis severity based on pressure wave measurements. Pressure waves for several degrees of stenosis at different distances proximal to the stenosis were recorded from in vitro and in vivo models. Signal analysis was performed using power spectral density, and radial compliance was also measured. Pressure wave components at the acoustic frequency band (400-2500Hz) changed gradually and were dependent upon the distance from the stenosis and its severity. The shift of the pressure components could also demonstrate the elastic properties of tubes and arteries and explain the effect of a bifurcation in the system.

Automated, real-time calibration of the respiratory inductance plethysmograph and its application in newborn infants

Respiratory inductive plethysmography (RIP) is widely used in infants, children and adults. The technique is well accepted as it provides important qualitative information on the pattern of breathing, although its ability to record volume accurately was questioned due to calibration uncertainties. Existing calibration methods require two-position calibration, or patient cooperation in performing various breathing manoeuvres, or prolonged calibration paradigms. The disadvantages from calibration difficulties are even more pronounced in infants. We present a computer system that is capable of performing a single-posture, real-time RIP calibration during natural breathing and is suitable for use in newborns. The calibration algorithm is based on interactive, point-by-point calculations of maximal correlation between airflow at the mouth, Vao, and summed differentiated RIP signals. The quantities are calculated interactively at every sample point, and the process continues until stable results are reached and convergence criteria met. A graphic user interface was developed to assist in the rapid implementation and ease of use. Validation schemes were evaluated in 33 newborn infants against actual Vao. Calibration factors were obtained within 21 +/- 11 s with a mean correlation coefficient of 0.97 +/- 0.03. All RIP-derived values were similar to actual airflow signals, with error values ranging from 0.4 +/- 3.0% for respiratory rate to 1.8 +/- 7.3% for tidal volume. Calibration was found to be stable and reliable for up to 3.5 h and in changing sleep states. It is concluded that the new single-posture real-time RIP calibration system is safe and simple to use, and also quick, accurate and stable. The system was found to be suitable for use in newborns during natural breathing while asleep.

Numerical modeling of the flow in stenosed coronary artery. The relationship between main hemodynamic parameters

The severity of coronary arterial stenosis is usually measured by either simple geometrical parameters, such as percent diameter stenosis, or hemodynamically based parameters, such as the fractional flow reserve (FFR) or coronary flow reserve (CFR). The present study aimed to establish a relationship between actual hemodynamic conditions and the parameters that define stenosis severity in the clinical setting. We used a computational model of the blood flow in a vessel with a blunt stenosis and an autoregulated vascular bed to simulate a stenosed blood vessel. A key point in creating realistic simulations is to properly model arterial autoregulation. A constant flow regulation mechanism resulted in CFR and FFR values that were within the physiological range, while a constant wall-shear stress model yielded unrealistic values. The simulation tools developed in the present study may be useful in the clinical assessment of single and multiple stenoses by means of minimally invasive methods.

Immunopathogenesis of hepatitis C virus in the immunosuppressed host

The prevalence of chronic hepatitis C virus (HCV) infection among various groups of immunosuppressed patients is high. These groups include patients co-infected with human immunodeficiency virus (HIV), recipients of organ transplants, and those with hypogammaglobulinemia. The liver disease in the immunosuppressed host is typically severe with an unusually rapid progression to cirrhosis. This is somewhat paradoxical, as the classical model for HCV-induced liver disease assumes that cell-mediated immune responses induce liver injury. It is likely that a combination of viral-related factors and host-related factors plays a role in this accelerated natural history of HCV. Data are accumulating in immunocompromised hosts that address the immunopathogenesis of liver injury, although there are still fundamental gaps in our understanding of this process. In this review, we will focus on our current understanding of the mechanisms of liver injury and how it relates to the accelerated liver disease progression in immunocompromised hosts.

The area of the pressure-flow loop for assessment of arterial stenosis: a new index

This study describes a novel method for assessing stenotic severity, based on simultaneous pressure and flow wave measurements. Pressure and flow measurements were performed in latex and rubber tubes, and in a clinically-used vascular graft. Pressure waves were recorded at several degrees of stenosis and at different distances proximal to the stenosis. Pressure wave versus flow wave was plotted. Internal pressure-flow loop area (PFLA), loop slope and pressure-axis intercept were calculated. Values of these three indices significantly increased with increasing degrees of stenosis P < 0.001). Similar phenomenon was observed during in-vivo experiments. Polynomial functions were fitted, resulting in an excellent PFLA variable/ percent stenosis correlation, independent of distance between sensor and stenosis (R2 > 0.96). In addition, tube compliance was measured and found to correlate with the polynomial coefficients (/R/ > 0.9). This innovative approach could significantly contribute to detecting and evaluating arterial stenoses, and to characterize the elasticity of the artery.

Unsteady effects on the flow across tilting disk valves

The present study simulates numerically the flow across two-dimensional tilting disk models of mechanical heart valves. The time-dependent Navier-Stokes equations are solved to assess the importance of unsteady effects in the fully open position of the valve. Flow cases with steady or physiological inflow conditions and with fixed or moving valves are solved. The simulations lead into mixed conclusions. It is obvious that steady inflow cases that account for vortex shedding only cannot model realistic physiological cases. In cases with imposed physiological inflow, the details of the flow field for fixed and moving valves might differ in the fully open position as well, although the gross features are quite similar. The fixed valve case consistently results in safe estimations of several critical quantities such as the axial force, the maximal shear stress on the valve, or the transvalvular pressure drop. Thus, fixed valve simulations can provide useful information for the design of prosthetic heart valves, as long as the properties in the fully open position only are sought.

Pressure-based simultaneous CFR and FFR measurements: understanding the physiology of a stenosed vessel

Arterial stenosis is known to be one of the most serious cardiovascular diseases. Angiographical estimation of arterial stenosis provides limited information on the severity of the occlusion and the flow of blood through it. Hemodynamical assessment of the flow and pressure behaviour, is known to be clinically important. Hemodynamically based parameters, such as pressure based myocardial fractional flow reserve (FFR) and the flow based coronary flow reserved (CFR) were introduced to provide a much better tool for treating arterial diseases. We have developed a new method for simultaneous measurement of pressure-derived CFR and FFR. The advantage of pressure derived hemodynamic parameters is very substantial, and its relatively straightforward application in clinical setting is solid. The method has been validated by means of a computational fluid dynamics (CFD) model of the arterial stenosis and in vitro bench studies.

Evaluation of center-line extraction algorithms in quantitative coronary angiography

Objective testing of centerline extraction accuracy in quantitative coronary angiography (QCA) algorithms is a very difficult task. Standard tools for this task are not yet available. We present a simulation tool that generates synthetic angiographic images of a single coronary artery with predetermined centerline and diameter function. This simulation tool was used creating a library of images for the objective comparison and evaluation of QCA algorithms. This technique also provides the means for understanding the relationship between the algorithms' performance and limitations and the vessel's geometrical parameters. In this paper, two algorithms are evaluated and the results are presented.

Airway burns and atelectasis in an adolescent following aspiration of molten wax

Scald injuries caused by hot liquids are not a frequently reported cause of pediatric respiratory and alimentary tract burns. Aspiration of molten wax with subsequent pharyngeal or laryngeal burns has not been described at all, to the best of our knowledge. A case of an adolescent who presented with airway burns and atelectasis subsequent to aspiration of molten wax is herein described and discussed.

Feasibility of mitral flow assessment by echo-contrast ultrasound, part I: determination of the properties of echo-contrast agents

Data on the ultrasonic properties of commercially available contrast agents are limited by being instrument-dependent, especially with regard to their backscattering properties. The present work describes methods of measurements that provide instrument-independent estimations of a contrast agent's attenuation coefficient and integrated backscatter index and provide them as functions of its concentration. The two studied commercially available contrast agents were Albunex and Levovist SHU 508-A, both representative of agents in common use for echocardiography. The attenuation coefficients and integrated backscatter indices of both agents were found to be a linear function of their concentrations. Proportionality coefficients +/- their standard deviations are provided. Actually, square root values of the averaged backscatter indices normalized with respect to the rms of the reference signal were determined. The coefficients of proportionality were found to be: C(A) = 3.11+/-0.1813 dB/mm; C(L) = 0.07+/-0.005 dB/mm for attenuation coefficients of the Albunex and Levovist contrast agents, respectively, and the corresponding values for backscattering were: D(A) = 0.07+/-0.0054; D(L) = 0.02+/-0.0012. Being apparatus-independent, the findings of the study are important prerequisites for the use of these echo-contrast agents as an indicator in research for a quantitative assessment of blood flow.

Feasibility of mitral flow assessment by echo-contrast ultrasound, part II: experimental study on a mechanical model of the left heart

The feasibility of assessing mitral flow by means of ultrasonic monitoring of backscattered power from an echo-contrast agent in the left atrium and left ventricle was studied. A mechanical model of the left heart was built in which two thin rubber balloons connected to each other in a feedback loop via two artificial heart valves mimicked the left atrium and left ventricle. The model was driven by compressed air. Its input and output flows were measured as the functions of a pacing rate, driving pressure and artificially introduced mitral regurgitation. These were compared with the corresponding data derived from the ultrasonic measurements that are based on the correlation between echo-contrast agent concentration in the volume of interest and the flow through it. Algorithms for quantitative estimations of forward stroke volume (cardiac output) and mitral regurgitation are given. This study shows, for the first time, both analytically and experimentally, that the pulsating modulation of contrast agent concentration vs. time curves in the ventricle and atrium volumes is closely related to the pulsating nature of the flow in the system. It also shows that the amplitude of the atrium concentration modulation is directly proportional to the maximum value of the incoming (to atrium) flow.

Can vortices in the flow across mechanical heart valves contribute to cavitation?

Cavitation in mechanical heart valves is traditionally attributed to the hammer effect and to squeeze and clearance flow occurring at the moment of valve closure. In the present study, an additional factor is considered--the contribution of vortex flow. Using a computational fluid dynamics analysis of a 2D model of a tilting disk mitral valve, we demonstrate that vortices may form in the vicinity of the inflow side of the valve. These vortices roll up from shear layers emanating from the valve tips during regurgitation. A significant decrease in the pressure at the centre of the vortices is found. The contribution of the vortex to the total pressure drop at the instant of closure is of the order of 70 mmHg. Adding this figure to the other pressure drop sources that reach 670 mmHg, it might be that this is the deciding factor that causes the drop in blood pressure below vapour pressure. The total pressure drop near the upper tip (750 mmHg) is larger than near the lower tip (670 mmHg), indicating a preferential location for cavitation inception, in agreement with existing experimental findings.

Traumatic macroglossia: a life-threatening complication

OBJECTIVE

To describe the use of muscle relaxants and a bite raiser to avoid continued tongue trauma.

DESIGN

Case report.

SETTING

A tertiary general intensive care unit (ICU).

INTERVENTIONS

Muscle relaxation and bite raiser.

MAIN RESULTS

Muscle relaxation and a bite raiser were used in a 17-yr-old male with traumatic macroglossia, which allowed for rapid resolution of edema and prevented additional trauma to the tongue.

CONCLUSION

Early use of a bite raiser together with muscle relaxants allows for more rapid solution of edema and prevention of additional trauma to the tongue in patients with traumatic macroglossia.