Bending property and phase transformation of Ti-Ni-Cu alloy dental castings for orthodontic application

Bending property of Ti-Ni-Cu alloy castings was investigated in a three-point bending test for orthodontic application in relation to the phase transformation. The compositions of the alloys were Ti-50.8Ni and Ti-40.8Ni-10.0Cu (mol %), and four cross-sectional shapes of the specimens were selected. Heat treatment was performed at 713, 753 or 793 K for 1.8 ks. The bending load changed by the cross-sectional size and shape mainly because of the difference in the moment of inertia of area, but the load-deflection relation did not differ proportionally in the unloading process. The difference between the load values in the loading and the unloading processes was relatively small for Ti-Ni-Cu alloy. With respect to the residual deflection, there was no significant difference between Ti-Ni and Ti-Ni-Cu alloys with the same treatment condition. The load values in the loading and the unloading processes decreased by each heat treatment for Ti-Ni alloy; however, the decrease in the load values for Ti-Ni-Cu alloy was not distinct. It is proved that Ti-Ni-Cu alloy castings produce effective orthodontic force as well as stable low residual deflection, which is likely to be caused by the high and sharp thermal peaks during phase transformation.

Deeply bound 1s and 2p pionic states in 205Pb and determination of the s-wave part of the pion-nucleus interaction

We observed well-separated 1s and 2p pi(-) states in 205Pb in the 206Pb(d,3He) reaction at T(d) = 604.3 MeV. The binding energies and the widths determined are B(1s) = 6.762+/-0.061 MeV, Gamma(1s) = 0.764(+0.154)(-0.171) MeV, B(2p) = 5.110+/-0.045 MeV, and Gamma(2p) = 0.321(-0.062)(+0.060) MeV. They are used to deduce the real and imaginary strengths of the s-wave part of the pion-nucleus interaction, which translates into a positive mass shift of pi(-) in 205Pb.

Bending properties of hollow super-elastic Ti-Ni alloy wires and compound wires with other wires inserted

The purpose of this research was to investigate the possible orthodontic application of the hollow super-elastic Ti-Ni alloy wire, which was thought not only to deliver much lower and more continuous orthodontic force than conventional Ti-Ni wires, but also be able to be applied as a compound wire when combined with another wire. The examinations of bending properties were performed by the three-point bending test. The following results were obtained. 1. The hollow wire had lower load in the super-elastic range, smaller load-deflection rate and stress hysteresis in comparison with the conventional wire of the same diameter. 2. The load of the hollow wire was controllable by heat treatment. The stress hysteresis was further decreased by a two-step heat treatment. 3. The compound wire formed by inserting other types of wires into the hollow core exhibited changes in various bending properties such as increased load or load-deflection rate, according to the types and diameters of the inserted wire. The hollow wire delivers much lighter and more continuous orthodontic force, and, through heat treatment or deployment as a compound wire, it is possible to alter various bending properties. Therefore, this hollow wire was evaluated as a promising candidate for orthodontic application.

Anisotropic orthodontic force from the hollow super-elastic Ti-Ni alloy wire by transforming the wire cross-section

The purpose of this research was to devise a method for transforming the cross-section of the hollow super-elastic Ti-Ni alloy round wire and to examine the changes in its bending properties for clinical orthodontic application. The specimen wires were pressed with the use of heated pliers to transform the cross-sectional shape. As a result, transformation of the wire cross-section with super-elasticity was possible. As a verified by cantilever test and three-point bending test of the transformed specimens, a two-dimensional orthodontic force, which was different in each bending direction, was obtained. The hollow wire showed considerably high load level in the long axis along with markedly low load level in the short axis, which was mainly caused by the change in the moment of inertia by transforming the cross-section. It was revealed that, by transforming the wire cross-section of the hollow super-elastic Ti-Ni alloy round wires, anisotropic orthodontic force in bending properties could be obtained with super-elasticity.

Specification of training sets and the number of hidden neurons for multilayer perceptrons

This work concerns the selection of input-output pairs for improved training of multilayer perceptrons, in the context of approximation of univariate real functions. A criterion for the choice of the number of neurons in the hidden layer is also provided. The main idea is based on the fact that Chebyshev polynomials can provide approximations to bounded functions up to a prescribed tolerance, and, in turn, a polynomial of a certain order can be fitted with a three-layer perceptron with a prescribed number of hidden neurons. The results are applied to a sensor identification example.

Albers-Schönberg disease (autosomal dominant osteopetrosis, type II) results from mutations in the ClCN7 chloride channel gene

Albers-Schönberg disease, or autosomal dominant osteopetrosis, type II (ADO II), is the most common form of osteopetrosis, a group of conditions characterized by an increased skeletal mass due to impaired bone and cartilage resorption. Following the assignment of the gene causing ADO II to chromosome 16p13.3, we now report seven different mutations in the gene encoding the ClCN7 chloride channel in all 12 ADO II families analysed. Additionally, a patient with the severe, autosomal recessive, infantile form of osteopetrosis (ARO) was identified as being homozygous for a ClCN7 mutation. From genotype-phenotype correlations, it seems that ADO II reflects a dominant negative effect, whereas loss-of-function mutations in ClCN7 do not cause abnormalities in heterozygous individuals. Because some ARO patients have mutations in both copies of the ClCN7 gene, ADO II is allelic with a subset of ARO cases.

[Urachal xanthogranuloma caused by a swallowed fish bone: a case report]

A 30-year-old man was referred to our department with a complaint of bladder irritability and with development of high fever. Physical examination revealed a tender mass in the suprapubic area. Computed tomographic scan and magnetic resonance imaging indicated a cystic mass above the bladder dome, extending toward the umbilicus. Urachal abscess was suspected and the mass was excised en bloc with the urachus. The wall of the mass was thickened, and a linear foreign body was detected in the mass, which was considered to be a fish bone. Pathological diagnosis of the mass was xanthogranuloma. We speculated that a swallowed fish bone had penetrated the bowel and might have migrated into the urachal cyst, which induced a xanthogranulomatous change of the wall.

Phantom studies for estimation of defect size on cardiac (18)F SPECT and PET: implications for myocardial viability assessment

SPECT with (18)F-FDG has emerged as an alternative to dedicated PET for the assessment of myocardial viability. However, whether FDG SPECT can reliably quantify the extent of viable and scarred myocardium is uncertain. The aim of this study was to investigate whether SPECT with an (18)F-labeled agent would provide information on defect size similar to that provided by dedicated PET.

METHODS

Imaging was performed using an elliptic cylinder chest phantom with simulated bone, lung, mediastinum, liver, and heart. (18)F was administered into the myocardium, mediastinum, right and left ventricular cavities, and liver. Plastic inserts (n = 11) ranging in size from 2% to 60% of the myocardium were used to simulate transmural myocardial infarctions. The chest phantom was imaged with a dedicated PET camera and with a double-head SPECT camera equipped with ultra-high-energy collimators. Both SPECT and PET data were analyzed using a semiquantitative polar map approach. Defects were quantified using various cutoff thresholds ranging from 30% to 80% of peak activity and were expressed as a percentage of the left ventricular myocardium. Defect size as measured by SPECT or PET was compared with true defect size.

RESULTS

The measured SPECT defect size was highly variable depending on the cutoff used, whereas PET defect size was relatively constant over the range of cutoffs tested. The mean absolute difference between measured and true defect sizes was minimal at a cutoff of 50% of peak activity for both SPECT (3.3% +/- 3.3%) and PET (2.7% +/- 2.5%). For this threshold, both SPECT and PET measurements showed an excellent correlation with true defect size (r = 0.98 for SPECT and 0.99 for PET). The correlation between SPECT and PET measurements was also excellent (r = 0.99; P < 0.01).

CONCLUSION

If an appropriate threshold is used to define a defect, SPECT with an (18)F-labeled agent can accurately measure defect size similarly to the manner of PET.

Dominant effect of supplemented-sucrose on the low protein diet-induced increase in blood pressure of Sprague-Dawley rats

A low-protein diet (LPD) is known to affect the regulation of hemodynamics, and could contribute to the genesis of hypertension. We investigated the mechanism for the LPD-induced elevation of blood pressure in 52 Sprague-Dawley rats. Rats fed the LPD for 8 weeks showed a significantly higher blood pressure than those fed on a normal-protein diet (NPD) when the LPD included sucrose as a predominant component of carbohydrate (LPD with a high sucrose content, 135 +/- 2 mmHg; NPD, 124 +/- 2 mmHg; p<0.05). However, LPD with a low sucrose content, in which corn starch was the main component of carbohydrate, did not have a hypertensive effect (125 +/- 2 mmHg). Urinary epinephrine and norepinephrine excretion was significantly higher in the LPD high-sucrose group than in the NPD and LPD low-sucrose groups, and there was a significant positive correlation between urinary norepinephrine excretion and systolic blood pressure. Urinary nitric oxide excretion was no different between these groups, and 2 % L-arginine administration exerted no antihypertensive effect on the LPD-induced elevation of blood pressure. Sodium restriction also did not attenuate the LPD-induced elevation of blood pressure. These results suggest that the effect of LPD on blood pressure could be interpreted as the effect of the high sucrose content supplemented to the LPD rather than the direct effect of protein restriction, and that the stimulation of sympathetic nervous activity was associated with this elevation of blood pressure.

Antithrombogenic polymer alloy composed of 2-methacryloyloxyethyl phosphorylcholine polymer and segmented polyurethane

To evaluate the antithrombogenicity of a new polymeric biomaterial in vivo, a polymer alloy tube composed of poly[2-methacryloyloxyethyl phosphorylcholine(MPC)-co-2-ethylhexyl methacrylate](PMEH) polymer and a segmented polyurethane (SPU) was prepared by a solvent evaporation method on a Teflon rod from a homogeneous solution containing both the PMHE and SPU. The composition of the PMEH vs the SPU was 10 wt%. The inner and outer surfaces of the polymer alloy tubing were characterized by X-ray electron spectroscopic (XPS) measurements. The MPC units were located on the inner surface of the polymer alloy tubing rather than the outer surface. After immersion in aqueous media, a higher concentration of the MPC units was observed on both surfaces. Selective staining of the MPC units with osmium tetraoxide was carried out to observe the morphology of the PMEH domain on the surface of the polymer alloy. There were large-sized PMEH domains on the inner surface of the tubing but small-sized domains were found on the outer surface. This result was in good agreement with the XPS results. Blood compatibility of the polymer alloy was evaluated by observation of fibrinogen adsorption and platelet adhesion from human plasma. A lot of fibrinogen was adsorbed and many platelets adhered to the inner surface of the original SPU tubing. On the other hand, the PHEH/SPU polymer alloy tubing suppressed these adsorptions and adhesions. When the PMEH/SPU polymer alloy tubing was implanted into a rabbit's artery, thrombus could not be observed even after a 7-day implantation but the original SPU tubing was almost totally occluded only after a 90-min implantation due to serious thrombus deposition on the surface. These results clearly indicated that the PMEH in the SPU matrix acted as an antithrombus reagent by suppression of protein adsorption and platelet adhesion and activation. Particularly, the MPC units played a significant role in this function.

Parenchymal hyperdensity on computed tomography after intra-arterial reperfusion therapy for acute middle cerebral artery occlusion: incidence and clinical significance

BACKGROUND AND PURPOSE

The purpose of the present study was to assess the incidence and clinical significance of the intraparenchymal hyperdense areas on the posttherapeutic CT scan just after intra-arterial reperfusion therapy.

METHODS

Seventy-seven patients with acute middle cerebral artery occlusion were studied prospectively with post-therapeutic CT. Hyperdense areas were classified into three groups: those in the lentiform nucleus, insular cortex and cerebral cortex. We investigated the incidence of hyperdense areas and hemorrhagic transformations and assessed whether location of hyperdense areas may play a role in the incidence of hemorrhagic transformations. We also evaluated correlation between early CT signs and hyperdense areas.

RESULTS

Forty-five hyperdense areas were seen in 37 of the 77 patients (48.1%): 19 of the 45 (42.2%) were confirmed to be hematomas themselves, 6 (13.4%) showed later conversion to petechial hemorrhages, and 20 (44.4%) showed rapid disappearance without hemorrhagic transformations. Eleven of the 37 patients (29.7%) had neurological worsening due to massive hematoma (symptomatic hemorrhage), whereas none of the 40 patients without hyperdense areas had symptomatic hemorrhage. The incidence of hemorrhage among hyperdense areas was significantly lower in the insular cortex than in the other 2 regions (P<0.01). On the other hand, hyperdense areas in the lentiform nucleus had a significantly higher incidence of neurological worsening (P<0.05). There was a significant correlation between early CT signs and hyperdense areas (P<0.0001).

CONCLUSIONS

The presence of hyperdense areas was a significant risk factor for severe hemorrhagic transformations, although only 29.7% of patients with hyperdense areas had symptomatic hemorrhage. On the contrary, the absence of hyperdense areas was a reliable negative predictor for symptomatic hemorrhage.

Catecholamines decrease nitric oxide production by cytokine-stimulated hepatocytes

BACKGROUND

Catecholamines are significantly elevated in inflammatory responses and play a regulatory role in sepsis. Nitric oxide (NO), also a key inflammatory mediator in sepsis, is produced in large amounts by the inducible nitric oxide synthase (iNOS) in the liver. The purpose of this study was to test the hypothesis that catecholamines play a role in the regulation of NO production by hepatocytes.

METHODS

Primary hepatocytes were isolated from healthy male Sprague-Dawley rats and either cultured with normal medium or stimulated with cytomix (interleukin-1 beta, interferon-gamma, and tumor necrosis factor-alpha) in the presence or absence of epinephrine or norepinephrine at varying concentrations. Total RNA was isolated 6 hours after treatment and analyzed by Northern blotting for iNOS mRNA. Protein extracts were obtained at 12 hours and were analyzed by Western immunoblotting for iNOS. Cell culture supernatants were analyzed for NO, determined as the stable end-product NO(2)(-), at 24 hours.

RESULTS

Epinephrine and norepinephrine significantly decreased NO(2)(-) levels in stimulated hepatocytes but had no effect on iNOS mRNA or protein levels. The decrease in NO(2)(-) was reproduced by the adenylate cyclase stimulator, forskolin. The catecholamine-induced decrease in NO(2)(-) was completely reversed by the protein kinase A inhibitor Rp-8-Br-cyclic adenosine monophosphate.

CONCLUSIONS

Catecholamines decrease hepatocyte production of NO in response to cytokine stimulation. This effect seems to be due to post-translational events and appears to be mediated in part by cyclic adenosine monophosphate.

[Oral care reduces pneumonia of elderly patients in nursing homes, irrespective of dentate or edentate status]

Aspiration of oral secretions and their bacteria, especially gram-negative bacilli, is increasingly being recognized as an important factor in pneumonia. We investigated whether oral care reduces the frequency of pneumonia in the institutionalized elderly. Nurses or caregivers cleaned patients' teeth with toothbrushes after each meal, and scrubbed the oropharynx with an applicator with povidone iodine (1%) every day. Dentists or dental hygienists gave professional care once a week. During follow up, pneumonia decreased significantly in patients with oral care. Oral care was of benefit for both edentate as well as dentate subjects, although periodontal diseases might cause pneumonia. We suggest that oral care may be useful in preventing pneumonia in institutionalized elderly, irrespective of dentate or edentate status.

GTP cyclohydrolase I feedback regulatory protein-dependent and -independent inhibitors of GTP cyclohydrolase I

GTP cyclohydrolase I feedback regulatory protein (GFRP) mediates the feedback inhibition of GTP cyclohydrolase I activity by (6R)-L-erythro-5,6,7,8-tetrahydrobiopterin (BH4) through protein complex formation. Since guanine and BH4 have a common pyrimidine ring structure, we examined the inhibitory effect of guanine and its analogs on the enzyme activity. Guanine, 8-hydroxyguanine, 8-methylguanine, and 8-bromoguanine inhibited the enzyme activity in a GFRP-dependent and pH-dependent manner and induced complex formation between GTP cyclohydrolase I and GFRP. The type of inhibition by this group is a mixed type. All these properties were shared with BH4. In striking contrast, inhibition by 8-azaguanine and 8-mercaptoguanine was GFRP-independent and pH-independent. The type of inhibition by 8-azaguanine and 8-mercaptoguanine was a competitive type. The two compounds did not induce complex formation between the enzyme and GFRP. These results demonstrate that guanine compounds of the first group bind to the BH4-binding site of the GTP cyclohydrolase I/GFRP complex, whereas 8-azaguanine and 8-mercaptoguanine bind to the active site of the enzyme. Finally, the possible implications in Lesch-Nyhan syndrome and Parkinson diseases of the inhibition of GTP cyclohydrolase I by guanine and 8-hydroxyguanine are discussed.

[Preparation of a gel-forming ointment base applicable to the recovery stage of bedsore and clinical evaluation of a treatment method with different ointment bases suitable to each stage of bedsore]

A novel ointment base suitable for the treatment of bedsore at the recovery stage was developed by the use of hydroxypropyl methylcellulose (HM-HPMC) modified on the basis of the hydrophobicity. A considerable sustained release of drug (minocycline hydrochloride) formulated to the ointment (T50 of 170 min) was attained with a macrogol ointment (MO) mixed with the HM-HPMC and Carbopol (CP) of the formulating ratio of 3:7. It was also found that a change in the formulating ratio of HM-HPMC and CP lead to a change in the drug release rate. The water absorption property of the ointment base, required to absorb on exudative solution in applying to the bedsore treatment, was as high as that of an ointment base containing hydroxypropyl cellulose (HPC) and CP reported in our previous paper. We clinically evaluated the effectiveness of the bedsore treatment, in which different ointment bases were applied to patients at different stages of the bedsore. A total of 22 cases were divided into two categories for applying to the different treatments. One category comprised of 11 subjects was treated with a povidone-iodine sugargel, which was the conventional method in our hospital, while the other 11 subjects were treated by the use of the newly developed ointment bases in consideration for the different stages of the bedsore. In comparison of the clinical results with the healing index, we ascertained that the latter method was significantly more efficacious (p < 0.01-0.05) than the conventional one. The effectiveness was emphasized in treating the intractable bedsore classified into the grades IV and V. Therefore, we confirmed that the newly developed ointment base formulation is useful in treating bedsore at each stage.

Drug release from and mechanical properties of press-coated tablets with hydroxypropylmethylcellulose acetate succinate and plasticizers in the outer shell

Dissolution profiles of diltiazem hydrochloride (DIL) contained in core tablets from press-coated (PC) tablets with hydroxypropylmethylcellulose acetate succinate (HPMCAS) and plasticizers-adsorbent in the outer shell were investigated. Although, on the addition of triethyl citrate (TEC), triacetin (TA), and acetyltriethy citrate (ATEC) as plasticizers, DIL release was suppressed completely in first fluid (pH 1.2) for 10 h, it was not suppressed in HPMCAS on the addition of dibutyl sebacate (DBS) and acetylated monoglyceride. On the other hand, DIL in second fluid (pH 6.8) was released rapidly after a lag time in all the PC tablets. Water-soluble plasticizers such as TEC, TA, and ATEC showed greater compatibility to HPMCAS, and the results were consistent with suppression of DIL release in first fluid. Furthermore, as to PC tablets with HPMCAS and TEC-adsorbent, the DIL release in second fluid did not change after pretreatment in first fluid by the paddle-beads methods. To evaluate the resistance of the outer shell against such a mechanical impact, tablets with HPMCAS, HPMCAS and TEC- or DBS-adsorbent (H, HT, or HD tablets, respectively) were prepared. In compressive load-strain curves after immersion in first fluid, wet crushing strength was lower in the order of HT > H > HD tablets. Also, the curves of HT tablets at 3 and 21 h after immersion were quite different from those of other tablets, and it was hard to find crushing points. These results suggested that the resistance of the outer shell was due to plastic deformation properties involving some interaction between HPMCAS and TEC.

Ligand binding to the inhibitory and stimulatory GTP cyclohydrolase I/GTP cyclohydrolase I feedback regulatory protein complexes

GTP cyclohydrolase I feedback regulatory protein (GFRP) mediates feedback inhibition of GTP cyclohydrolase I activity by 6R-L-erythro-5,6,7,8-tetrahydrobiopterin (BH4), which is an essential cofactor for key enzymes producing catecholamines, serotonin, and nitric oxide as well as phenylalanine hydroxylase. GFRP also mediates feed-forward stimulation of GTP cyclohydrolase I activity by phenylalanine at subsaturating GTP levels. These ligands, BH4 and phenylalanine, induce complex formation between one molecule of GTP cyclohydrolase I and two molecules of GFRP. Here, we report the analysis of ligand binding using the gel filtration method of Hummel and Dreyer. BH4 binds to the GTP cyclohydrolase I/GFRP complex with a Kd of 4 microM, and phenylalanine binds to the protein complex with a Kd of 94 microM. The binding of BH4 is enhanced by dGTP. The binding stoichiometrics of BH4 and phenylalanine were estimated to be 10 molecules of each per protein complex, in other words, one molecule per subunit of protein, because GTP cyclohydrolase I is a decamer and GFRP is a pentamer. These findings were corroborated by data from equilibrium dialysis experiments. Regarding ligand binding to free proteins, BH4 binds weakly to GTP cyclohydrolase I but not to GFRP, and phenylalanine binds weakly to GFRP but not to GTP cyclohydrolase I. These results suggest that the overall structure of the protein complex contributes to binding of BH4 and phenylalanine but also that each binding site of BH4 and phenylalanine may be primarily composed of residues of GTP cyclohydrolase I and GFRP, respectively.

Correlation of early CT signs in the deep middle cerebral artery territories with angiographically confirmed site of arterial occlusion

BACKGROUND AND PURPOSE

Early CT signs in the deep middle cerebral artery (MCA) territories have been reported to be seen at the initial period of ischemia. We attempted to investigate the incidence of parenchymal hypodensity within 3 hours after ischemic onset among patients with angiographically proved embolic MCA occlusion and to assess the correlation of subtle hypodensity in the deep MCA territories with involvement of the lenticulostriate arteries in the presence of ischemia.

METHODS

Fifty CT images obtained within 3 hours after onset of embolic MCA occlusion were retrospectively reviewed by three neurosurgeons who were aware of clinical features. Early CT signs in the deep MCA territories were divided into three grades according to their anatomic location: grade I, normal basal ganglia with hypodensity localized to the insula; grade II, partial obscuration of the posterolateral part of the putamen; and grade III, hypodensity of the entire lentiform nucleus. A grade I CT sign was considered to be a negative finding for lenticulostriate artery involvement, whereas grade II and III CT signs were considered to be positive findings. Site of occlusion and involvement of the lenticulostriate arteries were confirmed by angiography.

RESULTS

Thirty-eight (76%) of 50 patients had early CT signs in the deep MCA territories. Sensitivity and specificity of a grade I CT sign indicating absence of lenticulostriate artery involvement in ischemia were 65% and 87%, respectively. On the other hand, sensitivity and specificity of grade II and grade III CT signs for presence of lenticulostriate artery involvement in ischemia were 77% and 100%, respectively. Grade II CT signs resulted from various sites of occlusion, whereas grade III was unequivocally predictive of proximal occlusion to all of the lenticulostriate arteries.

CONCLUSION

Involvement of the lenticulostriate arteries may be presumed by precise evaluation of subtle, CT-revealed hypodensity in the deep MCA territories, even within 3 hours of ischemic onset.

Correlation between loose density and compactibility of granules prepared by various granulation methods

The objectives of this study were to prepare the lactose granules by various granulation methods using polyethylene glycol 6000 (PEG 6000) as a binder and to evaluate the effects of granulation methods on the compressibility and compactibility of granules in tabletting. Lactose was granulated by seven granulation methods -- four wet granulations including wet massing granulation, wet high-speed mixer granulation, wet fluidized bed granulation and wet tumbling fluidized bed granulation; and three melt granulations including melt high-speed mixer granulation, melt fluidized bed granulation and melt tumbling fluidized bed granulation. The loose density, angle of repose, granule size distribution, mean diameter of granules, and the tensile strength and porosity of tablets were evaluated. The compactibilities of granules were varied by the granulation methods. However, the difference in compactibility of granules could not be explained due to the difference in compressibility, since there was no difference in Heckel plots due to granulation methods. Among their granule properties, the loose density of granules seemed to have a correlation with the tablet strength regardless of the granulation methods.

Super-elastic property of Ti-Ni alloy for use in dentistry

The super-elasticity of Ti-Ni alloy was investigated in tensile and bending tests to evaluate the mechanical properties of the castings and heat treatment effect on the bending properties of the wires for new clinical applications of the alloy in prosthodontics and orthodontics. In terms of the tensile properties of the castings, apparent proof stress increased and elongation decreased with the small increase in nickel content or with the decrease in titanium purity. This result suggests that precise control of the materials is indispensable to utilize the super-elasticity in dental cast appliances. In terms of the bending properties of Ti-Ni alloy wires, low residual deflection and small load/deflection ratio were obtained by the second heat treatment between 733 and 813 K, which was found to be suitable for the shape memory treatment of orthodontic appliances. Moreover, the functional force was changeable within this treatment temperature range.

Relaxant effects of isoproterenol and selective beta3-adrenoceptor agonists on normal, low compliant and hyperreflexic human bladders

PURPOSE

We compared the relaxant effects of the stimulation of beta-adrenoceptors with isoproterenol and of drugs selective for beta-adrenoceptor subtypes in detrusor preparations from patients with normal and neurogenic bladder, respectively.

MATERIALS AND METHODS

We studied in vitro preparations of a cystometrically normal, low compliant and hyperreflexic bladder from 45, 26 and 7 patients, respectively.

RESULTS

Isoproterenol relaxed concentration dependently and with the same potency as detrusor preparations obtained from normal and neurogenic bladders. In 37 normal detrusor, 25 low compliant and 7 hyperreflexic cases pD2 values were 6.36, 6. 25 and 6.38, respectively. Maximal relaxation did not differ significantly among the 3 groups (about 80% of 10-5 M. forskolin induced relaxation). Neither the beta1-/beta2-adrenoceptor agonist dobutamine nor the beta2-adrenoceptor agonist procaterol produced any significant relaxation of preparations from the 3 groups at a concentration of up to 10-5 M. At a concentration of 10-4 M. the preparations were relaxed but neither of these effects reached a maximum. BRL37344A and CL316243, selective beta3-adrenoceptor agonists and CGP-12177A (a selective beta3-adrenoceptor partial agonist and beta1-/beta2-adrenoceptor antagonist) relaxed detrusor preparations from the normal, low compliant and hyperreflexic groups when applied at concentrations greater than 10-6 M. For each agonist the pD2 value did not differ significantly among the 3 groups.

CONCLUSIONS

beta-adrenoceptor stimulation is an effective way of relaxing the human detrusor and the effect is similar in normal and neurogenic bladders. A major portion of the relaxant effect of isoproterenol is mediated via beta3-adrenoceptor stimulation. Clinical trials may reveal whether this method is useful for treating bladder overactivity.