Can surgically assisted rapid palatal expansion (SARPE) be recommended over orthodontic rapid palatal expansion (ORPE) for girls above the age of 14? : A cone-beam CT study on midpalatal suture maturation

BACKGROUND

For patients with a maxillary transversal deficiency (MTD), various treatment options are available, partly based on the practitioner's experience. This study aimed to determine a cut-off age for decision making between surgically assisted rapid palatal expansion (SARPE) over orthodontic rapid palatal expansion (ORPE) based on skeletal maturation in a female population.

METHODS

A total of 100 cone beam computed tomography (CBCT) images of young females were analyzed on maturation of the pterygomaxillary (PMS), zygomaticomaxillary (ZMS), transpalatal (TPS), and midpalatal (MPS) sutures. Based on the maturation of these four junctions, four independent observers had to determine whether they would prefer ORPE or SARPE to widen the maxilla.

RESULTS

For the PMS, the results show a closure of 83-100% from 13 to 17 years. As for the TPS, a closure of 78-85% was observed from 15 years of age. For the 15- to 17-year-old females, a closed ZMS was present in 32-47%. Regarding MPS, closed sutures presented in 61% (stages D and E) of the 15-year-old females. The cut-off age at which SARPE was recommended was 15.1 years for the orthodontist observers and 14.8 years for the maxillofacial surgeon observers.

CONCLUSIONS

Significant maturation of MPS was reached at the age of 15 in a female population. The PMS, TPS, MPS, and ZMS closed sequentially. A comprehensive diagnostic approach is necessary for choosing the appropriate treatment. When in doubt, age could assist decision making in a female population, with a cut-off age of 15 years in favor of SARPE based on this study.

A Comparative Evaluation of Efficacy of Various Obturating Techniques for the Presence of Voids

Aim

Evaluation of the efficacy of different obturating techniques and assessment of the presence of voids in different regions of the canal.

Materials and Methods

Sixty permanent single-rooted teeth with complete, mature root apices without any anatomic variation having straight patent root canals were included in the present study. Access cavity preparation followed by biomechanical preparation was done. Samples were divided into three groups-Group A: Single cone obturation, Group B: GuttaFlow 2, and Group C: GuttaCore, and obturation was carried out. The samples after obturation were stored at 370°C and 100% humidity in an incubator for 7 days to give adequate time for obturating materials to set. Cone beam computed tomography was performed with i-cat Cb 500 machine. The voids were checked on the root canal wall. The statistical analysis was done and the data after the statistical analysis was presented.

Result

GuttaCore obturators presented a lesser volume of voids followed by GuttaFlow 2 than the single cone techniques.

Conclusion

All the obturation techniques presented an inadequacy of obturation when the pre- and post-obturated volume of the root canal space was calculated. However, no statistically significant obturated volume differences were found between single cone and GuttaFlow 2 or between GuttaFlow 2 and GuttaCore system.

Evaluation of skeletal and dentoalveolar dimensions in patients with maxillary unilateral impacted canine: a cone beam computed tomographic study

OBJECTIVE

To assess the skeletal and dentoalveolar dimensions of subjects with the unilateral maxillary-impacted canine and compare it with the non-impacted side using cone beam computed tomography (CBCT).

METHODS

A split-mouth study that included 26 CBCTs (52 sides) with unilateral impacted canine was designed. The parameters analyzed were alveolar height; bucco palatal width at 2 mm, 6 mm, and 10 mm from alveolar crest; premolar width; lateral angulation of incisors; root length of lateral incisors; and crown-root angulation of lateral incisors. Obtained data were statistically analyzed by unpaired independent t-test.

RESULTS

The bucco palatal width at 2 mm and the premolar width from mid-palatal raphe were 1.22 mm and 1.71 mm less on the impacted side, respectively; the central and lateral incisor angulations were less by 3.69 degrees and 3.40 degrees, respectively, on the impacted side; the lateral incisor root length was 2.8 mm shorter on the impacted side; the crown-root angulation for lateral incisor was 2.4 degrees more on the impacted side.

CONCLUSION

The following conclusions can be drawn: (1) The premolar width is less on the impacted side. (2) The incisors are more distally angulated on the impacted side. (3) The crown-root angulation of the lateral incisor is mesially directed on the impacted side.

CLINICAL RELEVANCE

Asymmetric arch expansions should be undertaken in severe transverse asymmetries. In the beginning stages of treatment, the arch alignment, excluding incisors, must be undertaken to safeguard the roots of incisors.

Evaluation of presence of nasal deviation in patients presenting with obstructive sleep apnea using cone beam computed tomography

OBJECTIVE

Evaluation of the presence of nasal septal deviation in patients presenting with obstructive sleep apnea (OSA) using Cone-Beam Computed Tomography (CBCT).

METHOD

Patients diagnosed with OSA using polysomnography were further evaluated radiographically for the presence of nasal septal deviation, maxillary sinus septa, and oropharyngeal airway volume using CBCT.

RESULTS

Nasal deviation was present in all the patients and was classified according to Negus et al classification, further categorized with Apnea-hypopnea index (AHI) score, maxillary sinus septa in those patients were classified according to Al Faraj et al, and the oropharyngeal airway volume was found to be an average of 10,086.37 ± 3966.116 mm² airway volume.

CONCLUSION

All the patients in the study had nasal septal deviation, hence it can be considered as a radiographic marker in suspecting OSA.

Digital panoramic radiography and CBCT as auxiliary tools for detection of low bone mineral density in post-menopausal women: a cross-sectional study

BACKGROUND

Osteoporosis is a chronic, multifactorial skeletal disease that occurs especially in women following a decrease in estrogen levels and decrease in bone mineral density. The aim of this study was to evaluate the relationship between qualitative and quantitative indexes in panoramic radiographs and quantitative indexes in CBCT images with femoral and vertebral BMD in postmenopausal women.

METHODS

This comparative cross-sectional study was performed on postmenopausal women aging 40 to 80 years attending for obtaining either panoramic radiograph or mandibular CBCT scan. Dual energy X-ray absorptiometry (DEXA) was performed from the femur and lumbar vertebra. Quantitative parameters of mental index (MI), panoramic mandibular index (PMI), antegonial index (AI) as well as qualitative parameters of mandibular cortical index (MCI) and trabecular bone pattern (TP) were evaluated in panoramic radiographs. Quantitative parameters computed tomography mandibular index (CTMI), computed tomography index (inferior) [CTI(I)] and computed tomography index (superior) [CTI(S)] were analyzed in CBCT images. Kolmogorov-Smirnov tests and Pearson correlation coefficient were used (α = 0.05).

RESULTS

In individuals with panoramic radiography, statistically significant correlations were observed between MI with vertebral and femoral T-score, AI with vertebral and femoral T-score (except for the right AI with femoral T-score), and TP with vertebral and femoral T-score (p < 0.05). In the group with CBCT scans, the correlations between CTMI with vertebral and femoral T-score, CTI(I) with vertebral and femoral T-score, and CTI(S) with vertebral and femoral T-score were statistically significant (p < 0.05).

CONCLUSIONS

in CBCT images, quantitative indexes of CTMI, CTI(I), and CTI(S), and in panoramic images, quantitative indexes of MI and AI and qualitative index of TP can be used to predict the possibility of osteoporosis in postmenopausal women.

A Multimodal Phantom for Visualization and Assessment of Histotripsy Treatments on Ultrasound and X-Ray Imaging

OBJECTIVE

Histotripsy is an emerging non-invasive, non-ionizing and non-thermal focal tumor therapy. Although histotripsy targeting is currently based on ultrasound (US), other imaging modalities such as cone-beam computed tomography (CBCT) have recently been proposed to enable the treatment of tumors not visible on ultrasound. The objective of this study was to develop and evaluate a multi-modality phantom to facilitate the assessment of histotripsy treatment zones on both US and CBCT imaging.

METHODS

Fifteen red blood cell phantoms composed of alternating layers with and without barium were manufactured. Spherical 25-mm histotripsy treatments were performed, and treatment zone size and location were measured on CBCT and ultrasound. Sound speed, impedance and attenuation were measured for each layer type.

RESULTS

The average ± standard deviation signed difference between measured treatment diameters was 0.29 ± 1.25 mm. The Euclidean distance between measured treatment centers was 1.68 ± 0.63 mm. The sound speed in the different layers ranged from 1491 to 1514 m/s and was within typically reported soft tissue ranges (1480-1560 m/s). In all phantoms, histotripsy resulted in sharply delineated treatment zones, allowing segmentation in both modalities.

CONCLUSION

These phantoms will aid in the development and validation of X-ray-based histotripsy targeting techniques, which promise to expand the scope of treatable lesions beyond only those visible on ultrasound.

High diagnostic yield of electromagnetic navigation bronchoscopy performed under cone beam CT guidance: results of a randomized Belgian monocentric study

BACKGROUND

With the increasing use of low dose CT scans, numerous pulmonary nodules are detected. As majority of them are benign, development of efficient non-surgical diagnostic intervention is mandatory. Electromagnetic navigation bronchoscopy (ENB) has been developed to reach difficult to access lesions. The aim of the present study was to compare the diagnostic yield of ENB procedures performed in a classical endoscopy suite or in a hybrid room equipped by a cone beam CT (CBCT).

METHODS

A monocentric randomized study was performed in the Erasme Hospital between January 2020 and December 2021. Lung nodules of maximum 30 mm of diameter were eligible. In both arms (endoscopy or CBCT suites), ENB, fluoroscopic guidance and a radial endobronchial ultrasound were used to reach the lesion. Then six trans-bronchial biopsies (TBB) and one trans-bronchial lung cryobiopsy (TBLC) were performed. Primary outcomes were the diagnostic yield and diagnostic accuracy of the procedure.

RESULTS

Forty-nine patients were randomized (24 in the endoscopy and 25 in the CBCT arms). The lesion size was 15,9 ± 4,6 mm and 16,6 ± 6,0 mm respectively (mean ± SD, p = NS). The diagnostic yield of ENB performed under CBCT guidance was 80% compared to 42% when performed in the endoscopy suite under standard fluoroscopic guidance (p < 0,05). Similarly, the diagnostic accuracy in the CBCT group was 87% compared to 54% for the endoscopy group (p < 0,05). Duration of the procedure in the CBCT and endoscopy arms was 80 ± 23 and 61 ± 13 min respectively (mean ± SD, p < 0,01). Performing TBLC in addition to TBB increased the diagnostic yield by 14% (17 and 12,5% in CBCT and endoscopy suites respectively, p = NS).

CONCLUSION

This study highlighted the additional value to perform ENB procedure under CBCT guidance for small size (less than 2 cm of diameter) pulmonary nodules.

TRIAL REGISTRATION

Clinical trial registration number: NCT05257382.

New clinical application of digital intraoral scanning technology in occlusal reconstruction: A case report

BACKGROUND

Digital intraoral scanning, although developing rapidly, is rarely used in occlusal reconstruction. To compensate for the technical drawbacks of current occlusal reconstruction techniques, such as time consumption and high technical requirements, digital intraoral scanning can be used in clinics. This report aims to provide a way of selecting the most suitable maxillo-mandibular relationship (MMR) during recovery.

CASE SUMMARY

A 68-year-old man with severely worn posterior teeth underwent occlusal reconstruction with fixed prosthesis using digital intraoral scanning. A series of digital models in different stages of treatment were obtained, subsequently compared, and selected using digital intraoral scanning together with traditional measurements, such as cone beam computed tomography, joint imaging, and clinical examination. Using digital intraoral scanning, the MMR in different stages of treatment was accurately recorded, which provided feasibility for deciding the best occlusal reconstruction treatment, made the treatment process easier, and improved patient satisfaction.

CONCLUSION

This case report highlights the clarity, recordability, repeatability, and selectivity of digital intraoral scanning to replicate and transfer the MMR during occlusal reconstruction, expanding new perspectives for its design, fabrication, and postoperative evaluation.

Three-dimensional dento-skeletal effects of mandibular midline distraction and surgically assisted rapid maxillary expansion: A retrospective study

It was the aim of the study to provide a three-dimensional evaluation of dento-skeletal effects following bone-borne vs tooth-borne mandibular midline distraction (MMD) and tooth-borne surgically assisted rapid maxillary expansion (SARME). A retrospective observational study was conducted. Cone beam computed tomography (CBCT) records were taken pre-operatively (T1), immediately post-distraction (T2) and 1 year post-operatively (T3). All included 30 patients had undergone MMD (20 bone-borne MMD; 10 tooth-borne MMD). A total of 20 bone-borne MMD and 8 tooth-borne MMD patients had simultaneously undergone tooth-borne SARME. At T1 vs T3, canine (p = 0.007; 26.0 ± 2.09 vs 29.2 ± 2.02) and first premolar (p = 0.005; 33.8 ± 2.70 vs 37.0 ± 2.43) showed significant expansion on the tip level for tooth-borne MMD. This was no significant on the apex level, indicating tipping. Bone-borne MMD showed a parallel distraction gap, whereas tooth-borne MMD showed a V-shape. There was a significant (p = 0.017; 138 ± 17.8 vs 141 ± 18.2) inter-condylar axes increase for bone-borne MMD. In conclusion, bone-borne vs tooth-borne MMD and tooth-borne SARME showed stable dento-skeletal effects at 1 year post-operatively. Bone-borne and tooth-borne MMD seemed not to be superior to each other. The choice of distractor type therefore depends more on anatomical and comfort factors.

Retrospective evaluation of the morpometric and morphological anatomy of the occipital condyle, hypoglossal canal and foramen magnum in Turkish populaton with CBCT

PURPOSE

The aim of this study is to morphometrically and morphologically examine the occipital condyle, which is an important anatomical region in terms of surgery and forensic medicine, and its surrounding structures, to evaluate the change in mean values according to gender and age, and to evaluate the correlation of the measurements obtained.

METHODS

180 (90 men, 90 women) CBCT images selected from the archive of Ankara University Faculty of Dentistry. Occipital Condyle length and width, Hypoglossal Canal-Basion distance, Hypoglossal Canal-Opistion distance, Hypoglossal Canal-Occipital Condyle anterior and posterior border distance, Occipital Condyle thickness, Hypoglossal Canal length, the widest diameter of Hypoglossal Canal, the narrowest diameter of the Hypoglossal Canal, the length of the Jugular Tubercle, the width of the Jugular Tubercle, the anterior intercondylar distance, the posterior intercondylar distance, and the Foramen Magnum index were measured. At the same time, the presence of septum or spicule in the hypoglossal canal and protrusion of the occipital condyle were evaluated. The relationship of age, gender, anterior and posterior intercondylar distance, and foramen magnum index measurements with all measurements were examined.

RESULTS

In our study, all measurements were repeated 1 month after the first measurements to evaluate the intra-observer agreement, and the agreement between the obtained measurements and the first measurements was evaluated by calculating the intraclass correlation coefficient and 95% confidence intervals. Men's measurements were found to be significantly higher than women's measurements. When the coefficients of concordance in all measurements were examined, it was observed that there was a perfect concordance.

CONCLUSION

When the results of the study are evaluated, it is seen that the values ​​obtained are generally close to the studies related to CT. Considering this, an idea can be gained as to whether CBCT, which has a lower dose and less cost, can be used as an alternative to CT in studies to be conducted with more comprehensive and different methods in skull base surgical planning.

Comparisons of the effects of two types of titratable mandibular advancement devices on respiratory parameters and upper airway dimensions in patients with obstructive sleep apnea: a randomized controlled trial

OBJECTIVES

To compare the effects of two types of titratable mandibular advancement devices (MADs), namely MAD-H (allowing limited vertical opening) and MAD-S (allowing free vertical opening), on respiratory parameters and upper airway dimensions in patients with mild to moderate obstructive sleep apnea (OSA).

MATERIALS AND METHODS

Patients with mild to moderate OSA (5 ≤ apnea-hypopnea index (AHI) < 30 /h) were randomly assigned to two parallel MAD groups. All MADs were subjectively titrated according to a standardized protocol during a 3-month follow-up. Every patient underwent two polysomnographic recordings, and two cone beam computed tomography scans in supine position: one at baseline and another one after 3 months with the MAD in situ. The primary outcome variables were the AHI in supine position (AHI-supine) and the minimal cross-sectional area of the upper airway in supine position (CSAmin-supine).

RESULTS

A total of 49 patients were recruited, and 31 patients (21 men and 10 women) with a mean (± SD) age of 48.5 (± 13.9) years and a mean AHI of 16.6 (± 6.7) /h completed the study. In the per-protocol analysis, there was no significant difference between MAD-H (n = 16) and MAD-S (n = 15) in their effects on AHI-supine (P = 0.14) and CSAmin-supine (P = 0.59). Similar results were found in the intention-to-treat analysis (P = 0.47 and 0.57, respectively).

CONCLUSIONS

Within the limitations of this study, we conclude that there is no significant difference in the effects of an MAD allowing limited vertical opening and an MAD allowing free vertical opening on respiratory parameters and upper airway dimensions in patients with mild to moderate OSA.

CLINICAL RELEVANCE

MADs allowing limited vertical opening and allowing free vertical opening have similar effects on respiratory parameters and upper airway dimensions in patients with mild to moderate OSA.

TRIAL REGISTRATION

ClinicalTrials.gov Identifier: NCT02724865. https://clinicaltrials.gov/ct2/show/NCT02724865.

Three-dimensional Assessment of Two-rooted Maxillary Central Incisor with Labiogingival Groove: Endodontic and Periodontal Surgical Management

Understanding the diversity of root canal systems and their anatomical/morphological variations helps in achieving improved outcomes of root canal treatment. The outcome of endodontic treatment depends on a thorough knowledge of dental anatomy and its variations. Maxillary central incisor with two roots is a rare entity, so a complete clinical and radiological examination is important before initiating the treatment. Recently, three-dimensional (3D) radiography has improved the diagnosis and treatment planning in endodontics. So, the current report describes the endodontic and periodontal surgical management of traumatized discolored maxillary central incisors with two separated roots and root canals identified by two-dimensional (2D) and 3D radiographic examination.

How to cite this article

Prasad P, Galani M, Nawal RR, et al. Three-dimensional Assessment of Two-rooted Maxillary Central Incisor with Labiogingival Groove: Endodontic and Periodontal Surgical Management. Int J Clin Pediatr Dent 2023;16(3):528-533.

Root and canal morphology of mandibular second molars in an Egyptian subpopulation: a cone-beam computed tomography study

BACKGROUND

This study was using Cone beam computed tomography (CBCT) to examine the anatomical variations in mandibular second molars in an Egyptian sub-population.

METHODS

A total of 350 CBCT images (215 females and 135 males, aged 15-65 years) of mandibular second molars were evaluated. Samples were evaluated in terms of: number of roots, number of root canals, roots' cross section as well as prevalence and configurations of C-shaped canals. Statistical analysis was done to highlight differences between different categories and their prevalence among genders (significance level was set at p < 0.05). Data were presented as frequency and percentage values and were analyzed using chi square test followed by pairwise comparisons utilizing multiple Fisher's exact tests with Bonferroni correction. The significance level was set at p < 0.05 within all tests.

RESULTS

Of the 350 mandibular second molars evaluated, 87.2% were non-C-shaped while 12.8% were C-shaped with no gender-based statistically significant differences (χ2 = 0.19, p = 0.656). Most samples had three root canals (80%) followed by two (16%), then one (3.2%), and finally four (0.8%) root canals. Among the non-C-shaped molars, presence of two roots was most common (83.4%) followed by presence of a single root (16.2%), and only one sample (0.2%) had three roots, and this had no correlation with gender (χ2 = 1.86, p = 0.431). In the mesial roots Type IV Vertucci was the most common configuration found (68.8%), while Type I was the most prevalent in the distal roots (91.8%). The long oval configuration was the most commonly found cross section in mesial roots while "oval" was the most prevalent in distal roots.

CONCLUSION

Egyptian sub-population shows highly variable morphological features in mandibular second molars, hence, CBCT is highly recommended on case-to-case conditions.

Assessment of subjective image quality, contrast to noise ratio and modulation transfer function in the middle ear using a novel full body cone beam computed tomography device

BACKGROUND

Multi slice computed tomography (MSCT) is the most common used method in middle ear imaging. However, MSCT lacks the ability to distinguish the ossicular chain microstructures in detail resulting in poorer diagnostic outcomes. Novel cone beam computed tomography (CBCT) devices' image resolution is, on the other hand, better than MSCT resolution. The aim of this study was to optimize imaging parameters of a novel full body CBCT device to obtain optimal contrast to noise ratio (CNR) with low effective dose, and to optimize its clinical usability.

METHODS

Imaging of five anonymous excised human cadaver temporal bones, the acquisition of the effective doses and the CNR measurements were performed for images acquired on using Planmed XFI® full body CBCT device (Planmed Oy, Helsinki, Finland) with a voxel size of 75 µm. All images acquired from the specimens using 10 different imaging protocols varying from their tube current exposure time product (mAs) and tube voltage (kVp) were analyzed for eight anatomical landmarks and evaluated by three evaluators.

RESULTS

With the exception of protocol with 90 kVp 100 mAs, all other protocols used are competent to image the finest structures. With a moderate effective dose (86.5 µSv), protocol with 90 kV 450 mAs was chosen the best protocol used in this study. A significant correlation between CNR and clinical image quality of the protocols was observed in linear regression model. Using the optimized imaging parameters, we were able to distinguish even the most delicate middle ear structures in 2D images and produce accurate 3D reconstructions.

CONCLUSIONS

In this ex vivo experiment, the new Planmed XFI® full body CBCT device produced excellent 2D resolution and easily created 3D reconstructions in middle ear imaging with moderate effective doses. This device would be suitable for middle ear diagnostics and for e.g., preoperative planning. Furthermore, the results of this study can be used to optimize the effective dose by selecting appropriate exposure parameters depending on the diagnostic task.

[Camera-based navigation in the hybrid operating room]

Camera-based navigation in the hybrid operating room represents a possibility for precise, low-complication and efficient pedicle screw insertion in spinal surgery. In addition to increasing patient safety, the use of camera-based navigation as an orientation aid for the surgeon reduces radiation exposure. Camera-based navigation focuses on the surgeon's anatomical knowledge of landmarks, preoperative image acquisition, and subsequent information integration by the navigation software. The information provided from volume tomography (cone beam computed tomography, CBCT) and surface referencing through the video input from four optical cameras and the associated surface markers is collected, processed, optimized and customized by the software used. The result is the creation of a trajectory that allows the surgeon to analyze and evaluate complex anatomical structures more easily and facilitates the performance of the planned procedure. Minimally invasive insertion of pedicle screws using surface-reference navigation (augmented reality surgical navigation; ARSN) provides comparable accuracy to conventional fluoroscopic insertion of pedicle screws while reducing radiation by eliminating the need for postoperative computed tomographic imaging.

Detection and characteristics of the gubernacular tract in supernumerary teeth on cone beam computed tomography

OBJECTIVES

The aim of this study was to evaluate the prevalence and visualization of supernumerary teeth (ST) and imaging characteristics of their gubernacular tract (GT) using cone beam computed tomography (CBCT).

METHODS

Presence and visualization of ST were retrospectively evaluated using 960 CBCT images. The imaging characteristics of GT were analyzed to determine various presentations of GT according to type, shape, and orientation of ST.

RESULTS

ST were radiographically detected in 93 patients, for a prevalence of 9.7%. Premolar shaped ST were more common (p = 0.003). GT was detected in 104 (77.2%) of impacted ST and mostly found straight in shape (49.0%). It was most frequently observed in peridens (n = 51, 49.0%) followed by mesiodens (n = 41, 39.4%) and more frequently seen in premolar-like ST (n = 44, 42.3%). The mean length of the GT in mandible was 2.8 mm, the mean length of the GT in maxilla was 1.0 mm (p < 0.001). The mean angle of the GT in mandible was 17.0, and the mean angle of the GT in maxilla was 43.0 (p = 0.004).

CONCLUSIONS

CBCT can be used for evaluations in dental practice to provide comprehensive information about ST and their GT characteristics. Clinicians should be able to identify the characteristics of GTs on CBCT for dental treatments, especially traction and extraction of ST.

In vitro study on the accuracy of sleeveless guided endodontics and treatment of a complex upper lateral incisor

PURPOSE

The present study aims to assess the accuracy of sleeveless guided endodontics for root canal treatment of severe pulp canal obliteration (PCO) in 3D printed jaws. Additionally, the treatment of a complex lateral incisor is presented to illustrate the use of sleeveless guides in a clinical situation.

METHODS

Two cone-beam computed tomography (CBCT) volumes of an upper and lower jaw were selected to design 3D printed models with PCO. Virtual planning of the access cavities was performed from right to left second premolar. Then, the models were mounted into a phantom head to simulate an actual patient. Two operators with different levels of experience in endodontics performed guided access cavities. The handpiece was guided by guiding rails placed against each other on the sides of the tooth. A post-operative CBCT scan was taken for analysis.

RESULTS

Eighty-eight guided access cavities (44 per operator) were drilled on eight 3D printed models. The mean length of the access cavities was 15.3 mm, with a mean coronal and apical deviation of 0.5 mm and 0.7 mm respectively. The mean angular deviation was 1.5^°. No statistically significant difference was found between operators for the three measured parameters.

CONCLUSIONS

This study demonstrates, within its limitations, that sleveless guides represent an accurate method for guided endodontic treatment. No statistically significant difference between operators was found when using the guide.

CLINICAL SIGNIFICANCE

This method offers a valuable alternative to conventional endodontic guides with similar accuracy results.

Comparison of Diagnostic Accuracy of Panoramic Radiography to CBCT in Maxillary Sinus Diseases

We aimed to compare the effectiveness of panoramic radiography (PR) and cone beam computed tomography (CBCT) in radiographic diagnosis of maxillary sinus (MS) diseases. MS diseases (mucosal thickening, mucus retention cyst, polyp sinusitis, mucocele and tumoral formations) was carried out on both PR and CBCT images belonging to 625 patients. Analyzes were performed separately for right and left maxillary sinus, and total of 1250 PR and CBCT images. While a diagnosis of disease was made in 42.96% of a total of 1250 MS according to CBCT. According to PR, diagnosis was made in 58.72%. The 537 diagnoses where lesion presence was determined on CBCT in our study were compared over PR, and it was observed that, there was the right diagnosis (true positive) in 106 (19.73%) of these including respectively mucus retention cyst (n = 88), polyp (n = 16), 1 sinusitis and 1 tumor, and there was an incorrect diagnosis (false positive) in 221 (41.15%). In 42.92% of the MS that were identified as healthy based on CBCT, the correct diagnosis was also made on PR (true negative). The use of CBCT instead of PR in the diagnosis of pathological or inflammatory diseases contributes to a more accurate radiographic differential diagnosis.

Anterior Maxillary Labial Bone Thickness on Cone Beam Computed Tomography

AIM

The objective of this research was to measure the labial bone thickness (LBT) in relation to the 6 anterior maxillary teeth at different levels along the long axis and the distance between cementoenamel junction and bone crest (CEJ-BC) based on cone beam computed tomography (CBCT) scans retrieved from patients of Arab ethnicity and identify any association with patients' characteristics.

MATERIALS AND METHODS

A total of 100 CBCT scans were evaluated by one calibrated examiner. The thickness of the labial bone was measured perpendicular to the long axis of the tooth at 1, 3, and 5 mm from the alveolar crest (LBT-1, LBT-3, and LBT-5, respectively) and CEJ-BC using a medical imaging viewer.

RESULTS

CBCT scans of 58 female patients and 42 male patients with a mean age of 39.7 ± 9.5 years were included. A high variation of CEJ-BC was observed (range, 0.55-3.90 mm). Statistically significant higher CEJ-BC values were associated with men and increased age (>50 years). The overall means of LBT-1 were 0.76 ± 0.26, 0.79 ± 0.26, and 0.83 ± 0.37 mm; LBT-3: 0.92 ± 0.36, 1.05 ± 0.46, and 1.03 ± 0.48 mm; LBT-5: 1.17 ± 0.52, 0.80 ± 0.45, and 0.81 ± 0.40 mm for central incisors, lateral incisors, and canines, respectively. The LBT was <1 mm in 74.2% of all maxillary anterior teeth, with central incisors showing the highest predilection (85% with LBT <1 mm). No significant association between LBT and patient characteristics was observed.

CONCLUSIONS

The CEJ-BC distance is greater in men and increases with age, particularly in those aged 50 years and older. The LBT in the 6 maxillary anterior teeth is predominantly thin (<1 mm) and has no correlation to age or sex. An increased LBT was observed at a 3-mm level when compared with LBT-1 and LBT-5. Such variability should be taken into consideration when planning for implant placement.

Evaluation of bone area in the posterior region for mandibular molar distalization in class I and class III patients

OBJECTIVES

The aim of this study was to investigate the bone area in the posterior region, which is important for mandibular molar distalization in skeletal class I and class III individuals with normodivergent and hyperdivergent vertical growth patterns.

MATERIALS AND METHODS

In this retrospective study, cone-beam computed tomography (CBCT) scans of 120 individuals divided into 4 groups as class I normodivergent (group-I), class I hyperdivergent (group-II), class III normodivergent (group-III), and class III hyperdivergent (group-IV). Retromolar area at crown level measurements was performed on CBCT-derived panoramic radiographs and axial sections. Retromolar area at the root level was measured 2 mm, 4 mm, 6 mm, 8 mm, and 10 mm apical to cemento-enamel junction at CBCT axial sections.

RESULTS

Retromolar area decreased towards the root apex in all groups and smallest retromolar area was level of CEJ_10mm in all groups. At any root level, the distal root of the mandibular second molar tooth was in contact with the mandibular inner or outer lingual cortex; 50% in group-I, 46.7% in group-II, 23% in group-III, and 23% in group-IV.

CONCLUSIONS

In normodivergent individuals, the retromolar area length at the root level is observed to be higher in class III than in class I at almost every level. In hyperdivergent individuals, on the other hand, only at CEJ_10mm level, it is higher in length in class III than in class I. Vertical growth pattern has no effect on the root and crown level retromolar area in class I and class III individuals.

CLINICAL RELEVANCE

CBCT provides more useful information than panoramic radiographs for patients who are scheduled for large mandibular molar distalization.

Cone beam computed tomography (CBCT) referrals in paediatric patients: A 24-month retrospective study in two radiological centers in Campinas, Brazil

PURPOSE

To evaluate the CBCT referrals in paediatric patients over a 24-month period.

METHODS

A retrospective study was conducted in two radiological centers in Campinas, Brazil. Patients were divided into three age groups: G1: age under 10 years, G2: age between 10 and 12 years, and G3: age over 12 years. The following data were collected: patients' age and sex, localisation, reasons for referral and dental specialty responsible for the request of CBCT exams.

RESULTS

Data from 367 patients were assessed. CBCT was used more frequently in the Group 3 (58.9%). There was significant association between the region of the exam and age group (P < 0.05), with a higher percentage of exams in the maxilla for the age over 12 years (35.6%) than that of up to 10 years (50.9%) and between 10 and 12 years (51.1%). Alterations were observed in 79.3% of the exams and 47.4% showed impacted teeth with significant association with the increase in age group (P < 0.05). Of the total number of exams, (55.3%) were requested in Orthodontics followed by Oral Surgery (30.0%) and Paediatric Dentistry (9.5%).

CONCLUSIONS

It can be concluded that CBCT exams were indicated frequently for the age over 12 years. The presence of impacted teeth represented the main reason for referrals and Orthodontics was the dental specialty that indicated CBCT with higher frequency.

Sexual dimorphism in odontometric parameters using cone beam CT: a systematic review

OBJECTIVE

To determine whether odontometric parameters using cone beam computed tomography (CBCT) would aid in sex estimation by assessing sexual dimorphism of odontometric parameters.

MATERIAL AND METHODS

The focused question was whether there is sexual dimorphism in linear and volumetric odontometric parameters when assessed using CBCT. The preferred reporting items for systematic reviews and meta-analysis (PRISMA) guidelines were followed to conduct a systematic search until June 2022 in all major databases. Data were extracted regarding the population, size of the sample, age range, teeth analyzed, linear or volumetric measurements, accuracy, and conclusion. The quality of included studies was assessed using (Quality Assessment of Diagnostic Accuracy Studies (QUADAS-2) tool.

RESULTS

Out of the 3761 studies identified, twenty-nine full-text articles were assessed for eligibility. Finally, twenty-three articles (4215 participants) that provided data on odontometrics using CBCT were included in this systematic review. The odontological sex estimation were assessed either linear measurements (n = 13) or volumetric measurements (n = 8) or both (n = 2). Canines were analysed in maximum number of reports (n = 14), followed by incisors (n = 11), molars(n = 10) and premolars(n = 6). Most of the reports (n = 18) confirmed the existence of sexual dimorphism in odontometric parameters when assessed using CBCT. No significant differences in odontometrics between the sexes were noted in some reports (n = 5). The accuracy of sex estimation was assessed in eight investigations, which ranged from 47.8 to 92.3%.

CONCLUSIONS

Odontometrics of human permanent dentition using CBCT exhibit a certain degree of sexual dimorphism. Both linear and volumetric measurements of teeth can aid sex estimation.

Effects of osseous structure based on three-dimensional reconstructive imaging evaluation in the assessment of temporomandibular joint disc position

OBJECTIVES

This pilot morphological study aimed to investigate the association between anterior disc displacement (ADD) and the status of the mandibular condyle and articular fossa.

MATERIALS AND METHODS

Thirty-four patients were divided into a normal articular disc position group and an ADD with and without reduction group. Images reconstructed were used to determine multiple group comparisons of these three different types of disc position, and the diagnostic efficacy for the morphological parameters with significant group difference was analyzed to assess.

RESULTS

The condylar volume (CV), condylar superficial area (CSA), superior joint space (SJS), and medial joint space (MJS) all exhibited obvious changes (P < 0.05). Additionally, they all had a reliable diagnostic accuracy in differentiating between normal disc position and ADD with an AUC value from 0.723 to 0.858. Among them, the CV, SJS, and MJS (P < 0.05) had a significantly positive impact on the groups by analysis of multivariate logistic ordinal regression model.

CONCLUSIONS

The CV, CSA, SJS, and MJS are significantly associated with different disc displacement types. The condyle in ADD exhibited altered dimensions. These could be promising biometric markers for assessing ADD.

CLINICAL RELEVANCE

The morphological changes of mandibular condyle and glenoid fossa were significantly influenced by the status of disc displacement, and condyles with disc displacement had three-dimensionally altered condylar dimensions, irrespective of age and sex.

The first patients treated with MR-CBCT soft-tissue matching in a MR-only prostate radiotherapy pathway

INTRODUCTION

Magnetic Resonance (MR)-only radiotherapy for prostate cancer has previously been reported using fiducial markers for on-treatment verification. MR-Cone Beam Computed Tomography (CBCT) soft-tissue matching does not require invasive fiducial markers and enables MR-only treatments to other pelvic cancers. This study evaluated the first clinical implementation of MR-only prostate radiotherapy using MR-CBCT soft-tissue matching.

METHODS

Twenty prostate patients were treated with MR-only radiotherapy using a synthetic (s)CT-optimised plan with MR-CBCT soft-tissue matching. Two MR sequences were acquired: small Field Of View (FOV) for target delineation and large FOV for organs at risk delineation, sCT generation and on-treatment verification. Patients also received a CT for validation. The prostate was independently contoured on the small FOV MR, copied to the registered CT and modified if there were MR-CT soft-tissue alignment differences (MR-CT volume). This was compared to the MR-only volume with a paired t-test. The treatment plan was recalculated on CT and the doses compared. Independent offline CT-CBCT matches for 5/20 fractions were performed by three therapeutic radiographers using the MR-only contours and compared to the online MR-CBCT matches using two one-sided paired t-tests for equivalence within ±1 mm.

RESULTS

The MR-only volumes were significantly smaller than MR-CT (p = 0.003), with a volume ratio 0.92 ± 0.02 (mean ± standard error). The sCT isocentre dose difference to CT was 0.2 ± 0.1%. MR-CBCT soft-tissue matching was equivalent to CT-CBCT (p < 0.001), with differences of 0.1 ± 0.2 mm (vertical), -0.1 ± 0.2 mm (longitudinal) and 0.0 ± 0.1 mm (lateral).

CONCLUSIONS

MR-only radiotherapy with soft-tissue matching has been successfully clinically implemented. It produced significantly smaller target volumes with high dosimetric and on-treatment matching accuracy.

IMPLICATIONS FOR PRACTICE

MR-only prostate radiotherapy can be safely delivered without using invasive fiducial markers. This enables MR-only radiotherapy to be extended to other pelvic cancers where fiducial markers cannot be used.

Three-dimensional assessment of the mandibular lingual foramina with implications for surgical and implant therapy: A multicentre cross-sectional study

Treatment planning for dental implants in the anterior mandible is often complicated by the presence of vascular structures. The aim of our study was to investigate the prevalence, location and morphology of the mandibular lingual foramen (LF) through cone beam computed tomography (CBCT) scans and contribute to its anatomical knowledge in an Indian population. A total of 400 mandibular anterior CBCT scans from 4 centers were included in this retrospective analysis. The vertical distance from alveolar crest (Hcre) and inferior border of mandible (Hinf) to the LF, horizontal distance from lingual canal to labial cortical plate (LC-CP), length of the lingual canal (LLC) and diameter of the LF were measured. Data was analysed using Wilcoxon signed rank test and compared between median and lateral LF. 14 (3.5%) scans were excluded due to non-visualization of LF. A lateral LF was detected in 149 scans (38.6%), predominantly in the canine region (61.7%). Hcre was significantly higher for median LF (16.35 ± 4.59 mm) than lateral LF (12.94 ± 3.92 mm) (p < 0.001), while Hinf did not show significant difference between median (11.38 ± 3.62 mm) and lateral (12.94 ± 3.92 mm) LF (p = 0.0032). The LC-CP, LLC and diameter of LF averaged at 5.05 ± 1.76 mm, 6.26 ± 1.82 mm and 0.88 ± 0.72 mm respectively. The LF can be visualized in CBCT scans with a prevalence of 96.5%. This study stresses on the need for a CBCT, prior to surgeries in anterior mandible to avoid excessive bleeding episodes.