Three-dimensional analysis of mandibular and mental canals corroborating with teeth and mental foramen by cone beam computed tomography

BACKGROUND

This study aimed to analyse the 3D patterns of the mandibular and mental canals (MDC and MC) referring to the surrounding prominent surgical landmarks such as teeth and mental foramen by cone beam computed tomography (CBCT).

METHODS

CBCT scans of 354 patients aged 18-67 years with mandibular first premolar to second molar were included and reconstructed 3-dimensionally (3D) by mimics. The parameters of MDC and MC were measured referring to teeth and mental foramen.

RESULTS

From the first premolars to the second molars, the mandibular canals showed a trend of gradually closer to the cementoenamel junction (CEJ) of the adjacent teeth and farther away from the buccal cortical plate. The distance of the MDC with the root apexes (RA) was relatively constant from the first premolar to the first molar, but became much closer to the second molar. About 10.8% of the second molars had MDC-RA distances of shorter than 2 mm, and 1.34% even had the MDC superior to the RA. Moreover, the Type III of MC presented in 66.0% of the subjects and had a relatively longer length. Besides, the existence of Type I MC may be related to the MDC featuring with close distances to the RA and CEJ of the adjacent teeth.

CONCLUSION

Dentists and surgeons should know the patterns of mandibular and mental canals. A better understanding of the MDC and MC and their relationship to local anatomical landmarks may facilitate the planning of surgeries and alert potential nerve injuries in the operative procedures.

Two or four implants for maxillary overdentures in edentulous patients: 1-year results of a randomized controlled trial

INTRODUCTION

Maxillary implant overdenture therapy is a good treatment option for treating patients experiencing problems with their conventional maxillary denture. Retaining the overdenture with four implants and a bar attachment system serves as the current gold standard. However, there is a demand for less costly and less invasive treatment options. The aim of this randomized controlled trial was to compare marginal bone level change (MBLC), implant and overdenture survival, clinical, masticatory, and patient-related outcomes (PROMs) of maxillary implant overdentures with either two or four implants and a bar attachment system.

MATERIALS AND METHODS

Forty edentulous participants were randomly allocated to two groups (n = 20), to receive either two or four implants in the maxilla. After healing, all the participants received an implant overdenture retained by a bar attachment system. All the participants were evaluated 1 and 12 months after overdenture placement. The primary outcome was MBLC. Secondary outcomes were implant and overdenture survival, clinical, masticatory, and PROMs. The outcomes were analyzed using parametric and non-parametric tests.

RESULTS

MBLC was -0.03 mm in the 2-implant group and -0.16 mm in the 4-implant group (p = 0.21). Implant survival was 83.3% in the 2-implant group and 94.4% in the 4-implant group (p = 0.03). The median pocket depth change and clinical outcomes were low, and masticatory performance along with PROMs improved in both groups and did not differ significantly between them.

CONCLUSION

Maxillary 4-implant overdentures perform better than maxillary 2-implant overdentures with a bar attachment system in terms of implant and overdenture survival and therefore remains the gold standard. However, both overdentures perform similarly in terms of MBLC, clinical, masticatory, and PROMs.

Clinical effect of Nobel Biocare angulated screw channel crown compared with cement crown in the aesthetic area: A retrospective cohort study with a mean 32 months follow-up (range 12 to 70 months)

OBJECTIVE

The objective of this study is to compare the clinical efficacy of angulated screw channel abutment applied in the anterior area with regular cemented crowns.

MATERIALS AND METHODS

Forty-eight patients were included and divided into two groups: the angulated screw channel group (ASC) and regular cemented group (RC) in this retrospective cohort study. The evaluation criteria included implant/restoration survival rate, keratinized mucosa width (KMW), bleeding on probing rate (BOP%), probing depth (PD), pink aesthetic score (PES), mechanical/biological complications, emergence angle (EA), the site of implant axis penetrate (SA), marginal bone loss (MBL), and buccal bone thickness (BBT) at 0 mm, 1 mm, 3 mm, 5 mm below the implant shoulder were evaluated in immediate postoperative (T0) and follow-up period (T1).

RESULTS

This retrospective cohort study included a total of 48 patients, with a mean 32 months follow-up period range from 12 months to 70 months. The study did not find any cases of implant failure or restoration failure. EA was significantly wider in the RC group than ASC group (RC: 33.53° ± 8.36° vs ASC: 27.43° ± 8.08°, p = 0.016*). While the BOP% was statistically significant higher in the RC group than ASC group (RC: 28.35% ± 22.92% vs ASC: 13.18% ± 20.00%, p = 0.027*). No significant differences were observed in the other measurements of comparison.

CONCLUSION

Within the limitations of the study, angulated screw channel (Nobel Biocare) crowns might allow the implant axis aim at incisal edge to reduce the emergence angle in the anterior area and benefit the soft-tissue during the 12-70 months follow-up period.

Adverse reactions to cosmetic implants after COVID-19 vaccination: A literature review

BACKGROUND

As the world's population of people vaccinated with the COVID-19 vaccine increases, adverse reactions are increasingly being reported. There have been progressive reports of the effects of COVID-19 vaccination on cosmetic fillers or prostheses, but they have not been reviewed based on their clinical morphologic patterns. This article reviewed the progress of research on adverse reactions to cosmetic implants after COVID-19 vaccination.

METHODS

We researched the English-language literature up to October 15, 2022, using predefined keywords to identify relevant studies about adverse reactions to cosmetic implants after the COVID-19 vaccination, collecting patient characteristics, implant type, the time interval between vaccination and implantation or injection, time of onset, symptoms, treatments, and outcomes.

RESULTS

Among the adverse reactions to implants associated with COVID-19 vaccination, we distinguished between (1) injectable fillers and (2) surgical prosthetic implants. The most common adverse reactions were at the site of hyaluronic acid injection and breast prosthesis after Pfizer vaccination, mainly DIRs, and mainly manifested as edema, rash, fever, and capsular contracture. This paper also reported the possible causes, treatments of DIRs, and limitations of current studies.

CONCLUSIONS

In this article, we attempted to investigate and discuss all the adverse reactions of cosmetic implants related to COVID-19 vaccination in the current literature, to unmask these reactions and make a more accurate assessment of vaccine safety.

Evaluation of the quality of life and the satisfaction level after reconstruction with anterior iliac crest graft and implant-supported fixed prosthesis treatment

PURPOSE

To evaluate oral health-related quality of life (OHRQoL) and satisfaction levels related to treatment in patients who have complete implant treatment and prosthetic rehabilitation after anterior iliac crest grafting.

MATERIALS AND METHODS

Fifty-four patients (37 F, 17 M) with a total of 487 implants placed and implant-supported fixed prosthesis treatment completed were included in the study. OHIP-14OHIP-14 scale and satisfaction Likert scale questions were used to evaluate the OHRQoL and the satisfaction levels related to the treatment applied, respectively. To compare the outcomes, the significance test and the Mann-Whitney U-test were used. One-way analyses of variance and Kruskal-Wallis were used to assess the significance of differences among or between the groups.

RESULTS

The quality of life (QoL) was higher, and the mean OHIP-14 scores were lower in women, older patients, and cases with a longer follow-up period, recorded as 13.6 ± 10.3 (p: 0.263), 12.9 ± 11.3 (p: 0.079), and 11.8 ± 9.6 (p: 0.015*), respectively. Moreover, satisfaction levels of the patients related to the treatment were 83.3%.

CONCLUSIONS

The treatment of severely atrophic jaws with anterior iliac crest for the implant and prosthetic rehabilitation has a positive effect on the QoL. This effect has increased with time, and the satisfaction levels of the patients related to this procedure were high, and their expectations regarding this treatment were met at a high level.

A double-blind randomized within-subject study to evaluate clinical applicability of four digital workflows for the fabrication of posterior single implant crown

OBJECTIVE

To compare efficiency and clinical efficacy of posterior single implant crowns (PSIC) fabricated using four digital workflows.

MATERIALS AND METHODS

Twenty-two patients with one missing first molar were included. Each patient received four screw-retained implant crowns fabricated through four different workflows including a fully digital workflow with immediate digital impression (Group i-IOS), a fully digital workflow with digital impression after implant osseointegration (Group d-IOS), a model-based hybrid workflow using immediate analogue impression (Group i-AI), and a model-based hybrid workflow with conventional analogue impression after implant osseointegration (Group d-AI). The crown delivery sequence was randomized and blinded. The efficiency for each workflow and clinical outcome of each crown were recorded.

RESULTS

The average clinical working time in fully digital workflows (i-IOS 46.90 min, d-IOS 45.66 min) was significantly lower than that in the hybrid workflows (i-AI 54.59 min, d-AI 55.96 min; p < .001). Significantly more laboratory time was spent in hybrid workflows (i-AI 839.60 min, d-AI 811.73 min) as compared to fully digital workflows (i-IOS 606.25 min, d-IOS 607.83 min, p < .01). No significant differences in the chairside time at delivery were found. More crowns in Group i-AI (15%) needed additional laboratory interventions than in the other groups (p = .029).

CONCLUSION

Digital impression and model-free fully digital workflow improved prosthetic efficiency in the fabrication of PSIC. With the limitation that the results were only applicable to the implant system used and the digital technologies applied, findings suggested that workflows integrating immediate impression with implant surgery procedure was clinically applicable for restoration of PSIC.

A customized 3D-printed histological microgrinder for the study of metallic endoprostheses

Use of histology is the key when evaluation of bone and soft tissue integration of any implanted metallic prosthesis is required. This relies on the ability to prepare very thin sections by grinding down resin embedded samples. Manual grinding has historically been used with variable success, and thus, a number of commercial microgrinders have been previously marketed, however, at a significant cost. The following describes a practical method to 3D print and build a microgrinder construct retrofitted to a metallurgic wheel grinder/polisher previously available. The design files are also supplied, which allow one to implement customized modifications for virtually all types of wheel grinders/polishers circumventing the need to procure highly costly appliances. Recommendations are included on how to safely and reproducibly prepare microscopic sections using the described construct.

Investigation of the effects of arch size and implant angulation on the accuracy of digital impression using two intraoral scanners: An in vitro study

OBJECTIVES

The aim of this in vitro study was to evaluate the effect of arch size and implant angulation on the accuracy of digital impression in two intraoral scanners of Trios (3shape) and CEREC (Omnicam).

MATERIAL AND METHODS

Four acrylic models each including six implants at sites 11, 12, 15, 17, 23, and 27 were used, including large with parallel implants, large with angled implants, small with parallel implants, and small with angled implants. After tightening the scan bodies, distance measurements were done using a coordinate measuring machine. Then, each model was scanned 10 times using each scanner. Trueness and precision measurements were finally computed.

RESULTS

The trueness values ranged from 20 to 260 μm in CEREC Omnicam, and from 40 to 1030 μm in Trios. The precision values ranged from 30 to 190 μm in CEREC Omnicam, while from 50 to 770 μm in Trios. The multivariate test analysis indicated that the measured distances via two scanners and different models show different behaviors. Pairwise interactions between these three variables were significant (p < .05). Pairwise interactions between these variables were also significant. (p < .0001).

CONCLUSIONS

Arch width could affect the accuracy of digital impression; by rotating toward the second quadrant and end points of the scan, errors have increased. However, the angulation of the implants had no effect on the accuracy of digital impression. The CEREC Omnicam scanner showed higher accuracy (trueness and precision) compared to the Trios (3shape) one.

A Case Report of Atraumatic Tooth Extraction Followed by Ridge Preservation for Implant-Supported Prosthetic Rehabilitation Using an Alloplastic Bone Graft

Exodontia is a painful treatment that frequently causes the alveolar bone and surrounding soft tissues to be immediately destroyed and lost. With regard to the amount of resorption taking place after extraction, various treatment protocols aimed at preventing or decreasing alveolar ridge collapse have been presented over the past three decades. Ridge preservation is a clinical technique used to prevent the socket walls' bone resorption after tooth extraction. A 43‑year‑old female patient with a non-significant medical history visited the Department of Periodontology and Implantology with a chief complaint of a decayed tooth in the upper left back region (26) for three years and wants to get it replaced. The treatment option that was given to the patient was atraumatic extraction, followed by ridge preservation. A cautious and conservative treatment strategy is necessary to preserve the oral structures as they currently exist and are intact for a successful outcome; careful case selection and thorough treatment planning are crucial. Atraumatic tooth extraction is a procedure used to delicately remove a tooth while upholding the fundamental principles of preserving the surrounding bone and gingival structure. This will ultimately maximize the success of implant placement in terms of appearance and functionality.

Fostering Excellence in Knee Arthroplasty: Developing Optimal Patient Care Pathways and Inspiring Knowledge Transfer of Advanced Surgical Techniques

Osteoarthritis of the knee is common. Early sports trauma or cartilage defects are risk factors for osteoarthritis. If conservative treatment fails, partial or total joint replacement is often performed. A joint replacement aims to restore physiological biomechanics and the quality of life of affected patients. Total knee arthroplasty is one of the most performed surgeries in musculoskeletal medicine. Several developments have taken place over the last decades that have truly altered the way we look at knee arthroplasty today. Some of the fascinating aspects will be presented and discussed in the present narrative review.

The effect of different implant programs on beef × dairy steer feedlot growth performance and carcass characteristics

The objective of this study was to evaluate potency and timing of trenbolone acetate (TBA) administration on live performance and carcass characteristics of beef × dairy steers. A total of 6,895 beef × dairy steers [initial body weight (BW) = 157 ± 5.2 kg] were allotted into 30 pens, with pen as the experimental unit. Each pen was randomly assigned one of three implant treatments: 1) Revalor-IS (IS) at d 0, IS at d 80, and Revalor-XS (XS) at d 160 (IS/IS/XS); 2) Ralgro at d 0, IS at d 80, and XS at d 160 (Ral/IS/XS); or 3) Encore at d 0 and XS at d 160 (Enc/XS). Steers were blocked by arrival date, each pen was terminally sorted in three ways at 257 ± 22 days on feed and harvested at 329 ± 25 days on feed. For live and carcass outcomes, fixed effect of implant treatment and random effect of block was evaluated. Data are reported on a deads and removals out basis. Removals, morbidity, and mortality were similar (P ≥ 0.45). Steers administered TBA prior to d 160 were 5.8 kg heavier (P = 0.03) than Enc/XS steers at d 160. Final BW was not different (P = 0.78). Early administration of a TBA-containing implant resulted in an increased prevalence of bullers [2.40%, 5.18%, 6.86% (for Enc/XS, Ral/IS/XS, and IS/IS/XS) respectively; P < 0.01]. Dry matter intake (DMI) was 2.3% greater (P < 0.01) in steers administered Enc/XS compared to IS/IS/XS; however, DMI as a percentage of BW, average daily gain, and feed efficiency were not different (P ≥ 0.12). Dressing percentage, hot carcass weight, heavy carcass occurrence, Longissimus muscle area, and 12th rib fat thickness were similar among all steers (P ≥ 0.28). Marbling score tended to be greatest for Enc/XS and Ral/IS/XS (P = 0.09). Enc/XS graded a greater proportion of USDA Prime and fewer USDA Select carcasses than IS/IS/XS (P < 0.05). Enc/XS and Ral/IS/XS tended (P = 0.09) to have more USDA Yield Grade (YG) 1 carcasses. While delayed administration or decreased total potency of TBA-containing implants may decrease buller incidence and improve Quality Grade, few differences were observed in live or carcass outcomes.

Multiparametric Comparison of Two TTA-Based Surgical Techniques in Dogs with Cranial Cruciate Ligament Tears

Tearing of the cranial cruciate ligament causes hindlimb lameness in dogs. Different surgical procedures have been proposed to treat this condition. In this study, two different TTA-based techniques and implants were compared. A total of 30 dogs were separated into two groups according to the technique and implant used (Porous TTA® or Model Xgen®). The aim of the study was to assess whether one of these techniques has better functional recovery of the joint, better bone consolidation after the osteotomy procedure and fewer osteoarthritic changes. We compared both groups up to 3 months after surgery. No significant differences were found in any of the assessed parameters. Thus, both procedures were found to be equally effective and safe.

Biomechanical evaluation of three implants for treating unstable femoral intertrochanteric fractures: finite element analysis in axial, bending and torsion loads

Purpose: How to effectively enhance the mechanical stability of intramedullary implants for unstable femoral intertrochanteric fractures (UFIFs) is challenging. The authors developed a new implant for managing such patients. Our aim was to enhance the whole mechanical stability of internal devices through increasing antirotation and medial support. We expected to reduce stress concentration in implants. Each implant was compared to proximal femoral nail antirotation (PFNA) via finite element method. Methods: Adult AO/OTA 31-A2.3 fracture models were constructed, and then the new intramedullary system (NIS), PFNA, InterTan nail models were assembled. We simulated three different kinds of load cases, including axial, bending, and torsion loads. For further comparison of PFNA and the NIS, finite element analysis (FEA) was repeated for five times under axial loads of 2100 N. Two types of displacement and stress distribution were assessed. Results: Findings showed that the NIS had the best mechanical stability under axial, bending, and torsion load conditions compared to PFNA and InterTan. It could be seen that the NIS displayed the best properties with respect to maximal displacement while PFNA showed the worst properties for the same parameter in axial loads of 2100 N. In terms of maximal stress, also the NIS exhibited the best properties while PFNA showed the worst properties in axial loads of 2100 N. For bending and torsion load cases, it displayed a similar trend with that of axial loads. Moreover, under axial loads of 2100 N, the difference between the PFNA group and the NIS group was statistically significant (p < 0.05). Conclusion: The new intramedullary system exhibited more uniform stress distribution and better biomechanical properties compared to the PFNA and InterTan. This might provide a new and efficacious device for managing unstable femoral intertrochanteric fractures.

Minimally Invasive Hypoglossal Nerve Stimulator Enabled by ECG Sensor and WPT to Manage Obstructive Sleep Apnea

A hypoglossal nerve stimulator (HGNS) is an invasive device that is used to treat obstructive sleep apnea (OSA) through electrical stimulation. The conventional implantable HGNS device consists of a stimuli generator, a breathing sensor, and electrodes connected to the hypoglossal nerve via leads. However, this implant is bulky and causes significant trauma. In this paper, we propose a minimally invasive HGNS based on an electrocardiogram (ECG) sensor and wireless power transfer (WPT), consisting of a wearable breathing monitor and an implantable stimulator. The breathing external monitor utilizes an ECG sensor to identify abnormal breathing patterns associated with OSA with 88.68% accuracy, achieved through the utilization of a convolutional neural network (CNN) algorithm. With a skin thickness of 5 mm and a receiving coil diameter of 9 mm, the power conversion efficiency was measured as 31.8%. The implantable device, on the other hand, is composed of a front-end CMOS power management module (PMM), a binary-phase-shift-keying (BPSK)-based data demodulator, and a bipolar biphasic current stimuli generator. The PMM, with a silicon area of 0.06 mm2 (excluding PADs), demonstrated a power conversion efficiency of 77.5% when operating at a receiving frequency of 2 MHz. Furthermore, it offers three-voltage options (1.2 V, 1.8 V, and 3.1 V). Within the data receiver component, a low-power BPSK demodulator was ingeniously incorporated, consuming only 42 μW when supplied with a voltage of 0.7 V. The performance was achieved through the implementation of the self-biased phase-locked-loop (PLL) technique. The stimuli generator delivers biphasic constant currents, providing a 5 bit programmable range spanning from 0 to 2.4 mA. The functionality of the proposed ECG- and WPT-based HGNS was validated, representing a highly promising solution for the effective management of OSA, all while minimizing the trauma and space requirements.

The accuracy of dynamic computer assisted implant surgery in fully edentulous jaws: A retrospective case series

OBJECTIVES

To evaluate the accuracy of implant placement using a dynamic navigation system in fully edentulous jaws and to analyze the influence of implant distribution on implant position accuracy.

MATERIALS AND METHODS

Edentulous patients who received implant placement using a dynamic navigation system were included. Four to six mini screws were placed in the edentulous jaw under local anesthesia as fiducial markers. Then patients received CBCT scans. Virtual implant positions were designed in the planning software based on CBCT data. Under local anesthesia, implants were inserted under the guidance of the dynamic navigation system. CBCTs were taken following implant placement. The deviation between the actual and planned implant positions was measured by comparing the pre- and postsurgery CBCT.

RESULTS

A total of 13 edentulous patients with 13 edentulous maxillae and 7 edentulous mandibles were included, and 108 implants were placed. The average linear deviations at the implant entry point and apex were 1.08 ± 0.52 mm and 1.15 ± 0.60 mm, respectively. The average angular deviation was 2.85 ± 1.20°. No significant difference was detected in linear and angular deviations between the maxillary and mandibular implants, neither between the anterior and posterior implants.

CONCLUSIONS

The dynamic navigation system provides high accuracy for implant placement in fully edentulous jaws, while the distribution of the implants showed little impact on implant position accuracy.

Risk factors contributing to early implant failure following sinus augmentation: A study of a challenging cohort

BACKGROUND

Sinus augmentation has become a more predictable and successful procedure as the knowledge of its indications and complications increased. However, knowledge of risk factors leading to early implant failure (EIF) among challenging systemic and local conditions is insufficient.

OBJECTIVES

The present study aims to assess risk factors for EIF following sinus augmentation in a challenging cohort.

METHODS

A retrospective cohort study conducted during a period of 8 years in a tertiary referral centre providing surgical and dental health care. Implant and patient variables including age, ASA (American Society of Anesthesiology) physical status classification, smoking, residual alveolar bone, type of anaesthesia and EIF were collected.

RESULTS

Cohort was comprised of 751 implants placed in 271 individuals. EIF rates at the implant and patient level were 6.3% and 12.5%, respectively. EIF was found to be higher among smokers (patient level: χ2 (1) = 8.74, p = .003), ASA 2 physical classification patients (patient level: χ2 (2) = 6.75, p = .03), sinuses augmented under general anaesthesia (patient level: χ2 (1)=8.97, p = .003), higher bone gain (implant level: W = 12 350, p = .004), lower residual alveolar bone height (implant level: W = 13 837, p = .001) and multiple implantations (patient level: W = 3016.5, p = 0.01). However, other variables such as age, gender, collagen membrane and implant's dimensions did not reach significance.

CONCLUSIONS

Within the limits of the study, we can conclude that smoking, ASA 2 physical status classification, general anaesthesia, low residual alveolar bone height and numerous implants are risk factors for EIF following sinus augmentation in challenging cohorts.

A Comparison of the Minimum Inhibitory Concentration of Antibiotics in Staphylococcus Species Isolated From Orthopedic and Respiratory Medicine Infections

INTRODUCTION

Antibiotic susceptibility is very important for the successful treatment of orthopedic infections, particularly for implant-related infections. While the minimum inhibitory concentrations (MICs) of Staphylococcus species were well investigated for the isolates from the respiratory tract, investigations for orthopedic pathogens are very limited. We investigated the antibiotic MIC values of Staphylococcus species isolated from orthopedic infections and compared them with those of respiratory medicine isolates used as a control.

METHODS

The MICs of vancomycin (VCM), arbekacin (ABK), teicoplanin (TEIC), linezolid (LZD), and rifampicin (RFP) of a total of consecutive 259 (89 orthopedic and 170 respiratory) Staphylococcus speciesisolated in our laboratory from January 2013 to July 2016 were retrospectively reviewed. Differences between the MICs of each antibiotic in orthopedic and respiratory samples were determined.

RESULTS

The number of methicillin-sensitive Staphylococcus aureus (MSSA) with a VCM MIC of <0.5 μg/mL among respiratory isolates was significantly higher than that among orthopedic isolates, while those with a MIC of 2 μg/mL were significantly lower (P = 0.0078). The proportion of methicillin-resistant coagulase-negative staphylococci (MRCNS) isolates with a VCM MIC of 2 μg/mL was significantly higher in orthopedic samples than that of methicillin-resistant Staphylococcus aureus (MRSA) (P < 0.001) in respiratory isolates. The proportion of MRCNS orthopedic isolates with an RFP MIC of >2 μg/mL was significantly higher (P = 0.0058) than that of other orthopedic staphylococci.

CONCLUSIONS

The VCM MICs of Staphylococcus species from orthopedic infections were higher than those of respiratory samples, particularly MRCNS from implant-related samples.

Surface Topography of PLA Implants Defines the Outcome of Foreign Body Reaction: An In Vivo Study

The formation of a dense fibrous capsule around the foreign body and its contracture is the most common complication of biomaterial implantation. The aim of our research is to find out how the surface of the implant influences the inflammatory and fibrotic reactions in the surrounding tissues. We made three types of implants with a remote surface topography formed of polylactide granules with different diameters: large (100-200 µm), medium (56-100 µm) and small (1-56 µm). We placed these implants in skin pockets in the ears of six chinchilla rabbits. We explanted the implants on the 7th, 14th, 30th and 60th days and performed optical coherence tomography, and histological, immunohistochemical and morphometric studies. We examined 72 samples and compared the composition of immune cell infiltration, vascularization, the thickness of the peri-implant tissues, the severity of fibrotic processes and α-SMA expression in myofibroblasts. We analyzed the scattering coefficient of tissue layers on OCT scans. We found that implants made from large granules induced a milder inflammatory process and slower formation of a connective tissue capsule around the foreign body. Our results prove the importance of assessing the surface texture in order to avoid the formation of capsular contracture after implantation.

Polyetheretherketone Material in Dentistry

A polyaromatic nearly-crystalline thermoplastic polymer, polyetheretherketone (PEEK), has become a useful biomaterial and its use has increased in dentistry because of its properties. PEEK is scientifically approved and is among the safest material used to restore lost orofacial tissues at present. PEEK has a property of high biocompatibility, therefore there is increased utilization of PEEK in orthopaedic and trauma cases. PEEK has several excellent properties due to which it has been used in several fields of dentistry such as orthodontic wires, implants, removable dentures, fixed partial dentures, finger prostheses, temporary abutments, implant-supported provisional crowns, healing caps, maxillofacial prostheses, etc. Due to its modification, PEEK material is used more frequently in clinical dentistry. PEEK can be used as a material that is not traditional in the realm of dental care. Modification of PEEK has led to an increase in its use in the field of dentistry.

Dental Implant Treatment in Bruxers: A Case Report and Literature Review

This case report presents a literature review and a case report of a full-mouth implant rehabilitation for a 65-year-old woman with a history of Bruxism. The patient's oral condition showed dentition with severe occlusal wear, extensive dental work, and missing teeth replaced with bridges and implants. The existing dental work was failing due to recurrent caries and the mechanical failure of long-span bridges. The unique aspect of the treatment presented in this report is the management of existing osseointegrated implants of different systems with different platform designs, which adds to the treatment's complexity. The existing implants were incorporated into the planned treatment, and other implants were added to support maxillary zirconia and mandibular hybrid full-arch prostheses. After 2 years of function, extensive wear was evident on the milled acrylic, even though an occlusal guard was used. New acrylic teeth were processed using the same milled titanium bar of the mandibular hybrid prosthesis, and the occlusal surfaces of the acrylic teeth were protected with gold onlays. The patient is seen regularly for maintenance every 6 months with no further complications. Careful evaluation, planning, and treatment execution are paramount in managing patients with a history of bruxism. Patients should be prepared and informed about possible mechanical failure and seen regularly for maintenance.

Intravitreal Fluocinolone 0.19mg Implant in the Management of Chronic Non-Infectious Uveitis: 12-Month Outcomes from a Single Tertiary Centre

AIM

To present efficacy and safety of 0.19 mg fluocinolone acetonide insert (FAi) to treat chronic noninfectious uveitis (NIU) in a single referral center.

METHODS

A retrospective observational clinical study of 11 eyes with NIU complicated by chronic cystoid macular edema (CMO).

RESULTS

The main indication for treatment was chronic CMO in all 11 eyes. The mean central retinal thickness (CRT) at baseline was 435 μm ± 176, improving to 296 μm ± 67 at 12 months. Raised intraocular pressure (IOP) was the commonest adverse event. An IOP >21 mmHg was observed in three eyes, and >30 mmHg in one eye, managed with topical therapy. The mean best corrected visual acuity (BCVA) was stable at 12 months. There were no observed recurrences of uveitis. Two eyes received adjunctive treatment for worsening CRT.

CONCLUSIONS

Our results suggest FAi is an effective maintenance treatment for NIU with favorable functional and anatomical outcomes.

Sinus floor augmentation using crestal approach in conjunction with hydroxyapatite/cross-linked collagen sponge: A pilot study

BACKGROUND

Different biomaterials were suggested for sinus floor augmentation (SFA). Recently, new materials were launched showing true bone formation without remnants.

PURPOSE

The aim of this prospective study was to evaluate an hydroxyapatite-based, sugar cross-linked collagen sponge (OSSIX™ Bone) in transcrestal SFA (t-SFA).

MATERIALS AND METHODS

Twenty-four patients with edentulous posterior maxilla and residual bone height (RBH) >4 mm underwent t-SFA with OSSIX™ Bone as grafting material and simultaneous implant placement. The implant Stability Quotient (ISQ) was measured by resonance frequency analysis (RFA) directly after implant insertion and at 6 months. Differences in bone height (BH) and volume were determined in CBCT and x-rays at baseline versus 1 year of follow-up. Graft volume was evaluated by tridimensional reconstructions. Linear regression analysis was used to evaluate the effect of bucco-palatal sinus dimension, RBH, and length of the implant protruding (PIL) into the sinus, on the graft height (GH) changes up to 1 year, and on the graft volume at 1 year. Autocorrelation between time lag and augmented bone volume was evaluated through time series analysis correlograms. Health-related quality-of-life outcomes were captured.

RESULTS

Twenty-two patients completed the study. The mean RBH measured at baseline was 5.81 ± 2.2 mm. The mean graft volume was 1085.8 ± 733.4 mm3 . The mean GH, measured in the immediate post-operative period, at 6 and 12 months respectively, was 7.24 mm ±1.94; 6.57 mm ± 2.30; 5.46 mm ± 2.04. The mean ISQ measured after the implant placement was 62.19 ± 8.09, and 6 months later was 76.91 ± 4.50. There was a significant correlation between buccolingual dimension and graft volume at 1 year. Neither buccolingual volume nor RBH had a significant effect on GH change, while the PIL showed a significant positive correlation (P = 0.02 and P = 0.03 at 6 and 12 months, respectively). The correlograms indicated no significant correlation, meaning that there is no tendency for graft volume to increase or decrease over time, therefore suggesting graft stability, at least up to one year of follow-up. 86% of patients had no chewing interference.

CONCLUSION

Within the limitations of the study, OSSIX™ Bone could be considered a valid material for SFA due to its manageability and its positive results in promoting new bone formation with long-term stability. T-SFA is confirmed as a less invasive and less painful method.

Soft Tissue Management Around the Dental Implant: A Comprehensive Review

In the modern world, there is an increasing concern among people regarding dental esthetics. Edentulism can impact one's appearance, affect the regular bite, and can even affect mental well-being. There are various options to replace the missing teeth, such as removable dentures, fixed crown and bridge prostheses, and resin-retained bridges. Various factors are evaluated before giving a suitable prosthesis for missing teeth. Implant installation is highly desired by patients as it has a high success and long-term survival rate when used to replace lost teeth. However, several difficulties relating to errors in treatment planning, surgery, soft tissue, and hard tissue care, and infections may compromise the efficacy of implant therapy. An increasing body of research indicates that long-term clinical stability and esthetics may be significantly impacted by the stability of the soft tissues around osseointegrated dental implants. Consequently, when implant therapy is planned, the dental surgeon has to have the necessary expertise to appropriately handle any possible causes of difficulties in addition to being able to carry out the necessary actions to maintain or develop stable soft tissue. Various augmentation procedures can be done for the correction of any deformity or inadequacy of soft tissues. Osseointegration is a fundamental part of the success of the implant treatment. It is the formation of a biological and functional connection between the bone and the implant increasing the stability of implant prosthesis. After the treatment, the patient should be counseled for regular and proper oral hygiene practices suitable for the implant. A proper follow-up has to be done after implant treatment in regular intervals. Any postoperative soft tissue complications, such as peri-implantitis or peri-implant mucositis, should be addressed immediately, and appropriate treatment has to be given. This article reviews about the procedures before and after the implant placement to prevent or treat soft tissue complications, ultimately leading to the success of the implant.

The Buccal Pedicle Sliding Flap Technique for Keratinized Tissue Augmentation During the Second-Stage Surgery: A Report of Two Cases

The need for adequacy of keratinized tissue (KT) around dental implants has been a topic of debate over the past few years. Peri-implant tissues differ from those around natural teeth. Therefore, the requirement for healthy peri-implant tissue is of importance. There is general agreement that a thick zone of KT around implants promotes accurate prosthetic procedures, permits maintenance of oral hygiene, resists recession and enables esthetic blending with surrounding tissues. Soft tissue augmentation around implants, when required, can be performed at various stages of implant therapy. The second stage of surgery involves the uncovery of the implant and placement of the healing abutment of desired collar height to achieve a biologic seal around the implant. It can be performed either by excision or by incision depending upon the clinical situation. This stage is a golden opportunity for the implant surgeon to modify the periodontal phenotype around the implant if need be. Different procedures such as palatal roll flap, rotated pedicle flap, free gingival graft, etc. can be performed to increase the keratinized tissue width (KTW) around implants. This case series demonstrates a novel minimally invasive technique to augment the KT in the maxillary arch during the second stage of surgery.

Evaluation of Tension and Deformation in a Mandibular Toronto Bridge Anchored on Three Fixtures Using Different Framework Materials, Abutment Systems, and Loading Conditions: A FEM Analysis

OBJECTIVE

 The aim of this study was to investigate by finite element method analysis the behaviour of a three-implant mandible Toronto framework made by three different materials, with two abutment systems and two loading conditions.

MATERIALS AND METHODS

 Three implants were virtually inserted in a mandible model in positions 3.6, 4.1, and 4.6. Three prosthetic framework bars with the same design and dimension (4.8 × 5.5 mm) were projected. The variables introduced in the computer model were the framework materials (glass fiber reinforced resin, Co-Cr, TiAl6V4), the abutment systems (Multi-Unit-Abutment [MUA]/OT-Bridge), and the loading conditions (500 N vertical load on all the framework area and 400 N on a 7-mm distal cantilever). The computer was programmed with physical properties of the materials as derived from the literature. Maximum tension and deformation values for each variable were registered at framework, screws, and abutment level and then compared.

RESULTS

 Metal frameworks Cr-Co and TiAl6V4 resulted in lower deformation than glass fiber-reinforced resin frameworks while presenting higher tension values. The OT-Bridge exhibited lower maximum tension and deformation values than the MUA system. The first loading condition reached higher tension and deformation values than the second and it resulted in more uniformly distributed load on all the framework area, especially with the OT-Bridge system.

CONCLUSION

 More rigid materials and OT-Bridge system decrease the deformation on the prosthetic components. Tension stresses are more uniformly distributed with glass fiber-reinforced resin, in the OT-Bridge system and avoiding cantilever loading.