Color-Stable and High-Efficiency Blue Perovskite Nanocrystal Light-Emitting Diodes via Monovalent Copper Ion Lowering Lead Defects

Light-emitting diodes using metal halide perovskite (PeLEDs) exhibit a strong potential for emerging display technologies due to their unique optoelectronic characteristics. However, for blue emission PeLEDs, there remains a huge challenge to achieve high performance, an issue that has been addressed in their red and green counterparts. The community is circumventing the challenges in synthesizing stable, high-quantum-efficiency, and low-defect-density blue emitters. Here, a facile strategy that replaces Pb by adding a monovalent ion Cu⁺, in this case into CsPbClBr₂ perovskite, is carried out. This decreases the Pb dangling bonds and increases the radiative recombination for the enhancement of blue emission. The nanoparticles obtained by this method maintain a blue emission at 479 nm. The photoluminescence quantum yield is 2 times higher than the pristine analogue. The corresponding perovskite nanocrystal (PNC) LEDs achieve stable electroluminescence spectrum at high brightness. Simultaneously, the optimal blue PNC LEDs obtain the maximum values of luminance and external quantum efficiency of 1537 cd m^-2 and 3.78%, respectively. And the device realizes typical blue light CIE chromaticity coordinates of (0.098, 0.123). Our work reveals that the substitution of Pb by heterovalent ions significantly decreases nanocrystal defects, which will pave the way of perovskite LEDs for practical applications in the future.

Cs-Lattice Extension and Expansion for Inducing Secondary Growth of CsPbBr3 Perovskite Nanocrystals

The increase of the stability of perovskite nanocrystals with respect to exposure to polar media, layers growth, or shelling with different materials is in demand. While these are widely studied for metal chalcogenide nanocrystals, it has yet to be explored for perovskite nanocrystals. Even growth of a single monolayer on any facet or on the entire surface of these nanocrystals could not be established yet. To address this, herein, a secondary growth approach leading to creation of a secondary lattice with subsequent expansion on preformed CsPbBr₃ perovskite nanocrystals is reported. As direct layer growth by adding precursors was not successful, Cs-lattice extension to preformed CsPbBr₃ nanocrystals was performed by coupling CsBr to these nanocrystals. Opening both {110}/{002} and {200} facets of parent CsPbBr₃ nanocrystals, CsBr was observed to be connected with lattice matching to the {200} facets. Further with Pb(II) incorporation, the Cs-sublattices of CsBr were expanded to CsPbBr₃ and led to cube-couple nanocrystals. However, as cubes in these nanostructures were differently oriented, these showed lattice mismatch at their junctions. This lattice mismatch though restricted complete shelling but successfully favored the secondary growth on specific facets of parent CsPbBr₃ nanocrystals. Details of this secondary growth via lattice extension and expansion are microscopically analyzed and reported. These results further suggest that lead halide perovskite nanocrystals can be epitaxially grown under proper reaction design and more complex as well as heterostructures of these materials can be fabricated to meet the current demands.

Ink-Lithography for Property Engineering and Patterning of Nanocrystal Thin Films

Next-generation devices and systems require the development and integration of advanced materials, the realization of which inevitably requires two separate processes: property engineering and patterning. Here, we report a one-step, ink-lithography technique to pattern and engineer the properties of thin films of colloidal nanocrystals that exploits their chemically addressable surface. Colloidal nanocrystals are deposited by solution-based methods to form thin films and a local chemical treatment is applied using an ink-printing technique to simultaneously modify (i) the chemical nature of the nanocrystal surface to allow thin-film patterning and (ii) the physical electronic, optical, thermal, and mechanical properties of the nanocrystal thin films. The ink-lithography technique is applied to the library of colloidal nanocrystals to engineer thin films of metals, semiconductors, and insulators on both rigid and flexible substrates and demonstrate their application in high-resolution image replications, anticounterfeit devices, multicolor filters, thin-film transistors and circuits, photoconductors, and wearable multisensors.

To crush or not to crush: A brief review of novel tablets and capsules prepared from nanocrystal and amorphous solid dispersion technologies

PURPOSE

To educate healthcare professionals regarding the risks of manipulating drug products formulated via nanocrystal or amorphous solid dispersion technologies.

SUMMARY

Recent pharmaceutics innovations such as nanocrystals and amorphous solid dispersions have been used successfully to improve oral bioavailability of drugs. Over 30 drug products based on these technologies have been approved by the Food and Drug Administration, and more are in the development pipeline. While these products are similar in appearance to traditional tablets or capsules, they should not be crushed or suspended in liquid vehicles. Such manipulations can compromise the integrity of the formulation and subsequently alter the oral bioavailability. It is alarming that the majority of these products are not included in the Institute for Safe Medication Practices (ISMP) "Do Not Crush" list. A summary drug table is presented in this article to provide accurate information for pharmacists and other healthcare providers.

CONCLUSION

Novel formulations of tablets and capsules are being used to increase the oral bioavailability of certain drugs. Crushing these products can significantly alter product performance and clinical outcomes. We encourage ISMP to add these drug products to the Do Not Crush list due to wide use of this list throughout healthcare. In the meantime, pharmacists should be mindful of the new formulation technologies and advocate for the proper use of these drug products.

Highly Stable Pickering Emulsions with Xylan Hydrate Nanocrystals

Xylan is a highly abundant plant-based biopolymer. Original xylans in plants are in an amorphous state, but deacetylated and low-branched xylan can form a crystalline structure with water molecules. The utilizations of xylan have been limited to bulk applications either with inconsistency and uncertainty or with extensive chemical derivatization due to the insufficient studies on its crystallization. The applications of xylan could be greatly broadened in advanced green materials if xylan crystals are effectively utilized. In this paper, we show a completely green production of nano-sized xylan crystals and propose their application in forming Pickering emulsions. The branches of xylan were regulated during the separation step to controllably induce the formation of xylan hydrate crystals. Xylan hydrate nanocrystals (XNCs) with a uniform size were successfully produced solely by a mild ultrasonic treatment. XNCs can be adsorbed onto oil-water interfaces at a high density to form highly stable Pickering emulsions. The emulsifying properties of XNCs were comparable to some synthetic emulsifiers and better than some other common biopolymer nanocrystals, demonstrating that XNCs have great potential in industrial emulsification.

Enhanced Emission from Bright Excitons in Asymmetrically Strained Colloidal CdSe/CdxZn1-xSe Quantum Dots

Colloidal CdSe quantum dots (QDs) designed with a high degree of asymmetric internal strain have recently been shown to host a number of desirable optical properties including subthermal room-temperature line widths, suppressed spectral diffusion, and high photoluminescence (PL) quantum yields. It remains an open question, however, whether they are well-suited for applications requiring emission of identical single photons. Here we measure the low-temperature PL dynamics and the polarization-resolved fluorescence line narrowing spectra from ensembles of these strained QDs. Our spectroscopy reveals the radiative recombination rates of bright and dark excitons, the relaxation rate between the two, and the energy spectra of the quantized acoustic phonons in the QDs that can contribute to relaxation processes. In comparison to conventional colloidal CdSe/ZnS core/shell QDs, we find that in asymmetrically strained CdSe QDs over six times more light is emitted directly by the bright exciton. These results are therefore encouraging for the prospects of chemically synthesized colloidal QDs as emitters of single indistinguishable photons.

Improved transdermal permeability of tanshinone IIA from cataplasms by loading onto nanocrystals and porous silica

Novel transdermal cataplasms have been designed to improve permeability of poorly soluble drugs by different pretreatments. Nanocrystal and porous silica solid dispersions were loaded with Tanshinone IIA and incorporated into a cross-linked hydrogel matrix of cataplasm. It was shown that the small particle size and improved dissolution would increase dermal bioavailability. The adhesion, rheological properties, drug release, skin permeation, skin deposition and in vivo skin absorption of the different formulations were investigated. In an in vitro experiment using mouse skin, cumulative amount of drug permeated within 24 h was 7.32 ± 0.98 μg/cm² from conventional cataplasm, 13.14 ± 0.70 μg/cm² from nanocrystal-loaded cataplasm and 11.40 ± 0.13 μg/cm² from porous silica solid dispersion-loaded cataplasm. In vitro dissolution profiles showed that drug release was 76.5% and 74.9% from two optimized cataplasms within 24 h, while conventional cataplasm was 55.0%. The cross-linking characteristics of the cataplasms were preserved after incorporation of different drug forms, while the elastic and viscous behaviors of the hydrogel layers increased. In vivo evaluation by CLSM showed the more favorable skin permeation for two optimized cataplasms. These findings suggest that applications of nanocrystal and porous silica systems on cataplasms enable effective transdermal delivery of poorly soluble drugs. The resulting drug delivery and rheological properties are desirable for transdermal application.AbbreviationAll the abbreviations that appear in this article are shown in Table 1.

Brain-targeting delivery of MMB4 DMS using carrier-free nanomedicine CRT-MMB4@MDZ

Brain-targeting delivery of 1,1′-methylenebis[4-[(hydroxyimino)methyl]-pyridinium] dimethanesulfonate (MMB4 DMS) is limited by its hydrophilic property and chemical instability. In order to solve this problem, herein, we develop a facile protocol through combining antisolvent precipitation and emulsion-solvent evaporation method to synthesize midazolam (MDZ) coated MMB4 DMS (MMB4@MDZ) nanoparticles. The as-prepared MMB4@MDZ had a MMB4 DMS nanocrystal (MMB4-NC) core and a MDZ shell. The MDZ shell prevented the MMB4-NC core from contacting the aqueous environment, and thus, guaranteed the chemical stability of MMB4 DMS. Most charmingly, the iron mimic cyclic peptide CRTIGPSVC (CRT) was modified on MMB4@MDZ surfaces to produce CRT-MMB4@MDZ which was endowed with ability to absorb transferrin (Tf)-abundant corona. Taking advantages of the Tf-abundant corona, CRT-MMB4@MDZ achieved transferrin receptor (TfR)-mediated brain-targeting delivery. With the fascinating chemical stability and brain-targeting delivery effect, CRT-MMB4@MDZ showed great clinical transform prospect as a brand-new nanomedicine. Of particular importance, this work promised not only a core–shell carrier-free nanomedicine platform for effective delivery of unstable water-soluble drug, but also a protein corona-manipulating strategy for targeting delivery.

Luminescence Fine Structures in Single Lead Halide Perovskite Nanocrystals: Size Dependence of the Exciton-Phonon Coupling

Lead halide perovskite nanocrystals (NCs) have superior photoluminescence (PL) properties, such as high PL quantum yields and wide PL wavelength tunability, for optoelectronic applications. Here, we report the PL spectra of single formamidinium lead halide perovskite FAPbX₃ (X = Br, I) NCs examined by single-dot spectroscopy at low temperature. We found four PL peaks in the low-energy region below the strong exciton PL peak that originate from two longitudinal-optical (LO) phonon replicas of the exciton PL, biexcitons, and charged excitons (trions). The binding energies of the biexcitons and trions become larger as the NCs decrease in size. The LO phonon energies show no size dependence, but the Huang-Rhys factors, which reflect the strength of the exciton-phonon coupling, become larger for smaller NCs. Our findings provide important insights into the exciton properties of perovskite NCs.

Bias Tunable Spectral Response of Nanocrystal Array in a Plasmonic Cavity

Nanocrystals (NCs) have gained considerable attention for their broadly tunable absorption from the UV to the THz range. Nevertheless, their optical features suffer from a lack of tunability once integrated into optoelectronic devices. Here, we show that bias tunable aspectral response is obtained by coupling a HgTe NC array with a plasmonic resonator. Up to 15 meV blueshift can be achieved from a 3 μm absorbing wavelength structure under a 3 V bias voltage when the NC exciton is coupled with a mode of the resonator. We demonstrate that the blueshift arises from the interplay between hopping transport and inhomogeneous absorption due to the presence of the photonic structure. The observed tunable spectral response is qualitatively reproduced in simulation by introducing a bias-dependent diffusion length in the charge transport. This work expands the realm of existing NC-based devices and paves the way toward light modulators.

Crystal Structure of Colloidally Prepared Metastable Ag2Se Nanocrystals

Structural polymorphism is known for many bulk materials; however, on the nanoscale metastable polymorphs tend to form more readily than in the bulk, and with more structural variety. One such metastable polymorph observed for colloidal Ag₂Se nanocrystals has traditionally been referred to as the "tetragonal" phase. While there are reports on the chemistry and properties of this metastable polymorph, its crystal structure, and therefore electronic structure, has yet to be determined. We report that an anti-PbCl₂-like structure type (space group P2₁/n) more accurately describes the powder X-ray diffraction and X-ray total scattering patterns of colloidal Ag₂Se nanocrystals prepared by several different methods. Density functional theory (DFT) calculations indicate that this anti-PbCl₂-like Ag₂Se polymorph is a dynamically stable, narrow-band-gap semiconductor. The anti-PbCl₂-like structure of Ag₂Se is a low-lying metastable polymorph at 5-25 meV/atom above the ground state, depending on the exchange-correlation functional used.

Nanoengineering InP Quantum Dot-Based Photoactive Biointerfaces for Optical Control of Neurons

Light-activated biointerfaces provide a non-genetic route for effective control of neural activity. InP quantum dots (QDs) have a high potential for such biomedical applications due to their uniquely tunable electronic properties, photostability, toxic-heavy-metal-free content, heterostructuring, and solution-processing ability. However, the effect of QD nanostructure and biointerface architecture on the photoelectrical cellular interfacing remained unexplored. Here, we unravel the control of the photoelectrical response of InP QD-based biointerfaces via nanoengineering from QD to device-level. At QD level, thin ZnS shell growth (∼0.65 nm) enhances the current level of biointerfaces over an order of magnitude with respect to only InP core QDs. At device-level, band alignment engineering allows for the bidirectional photoelectrochemical current generation, which enables light-induced temporally precise and rapidly reversible action potential generation and hyperpolarization on primary hippocampal neurons. Our findings show that nanoengineering QD-based biointerfaces hold great promise for next-generation neurostimulation devices.

Local Morphology Effects on the Photoluminescence Properties of Thin CsPbBr3 Nanocrystal Films

Lead halide perovskites are emerging as extremely interesting active materials for a wide variety of optoelectronic and photonic devices. A deep understanding of their photophysics is thus fundamental in order to properly understand the origins of the materials active properties and to provide strategies for improving them. In this work, we exploit the local morphological variations in a drop-cast thin CsPbBr3 nanocrystal film to show that the aggregation of NCs has strong effects on the peak wavelengths of PL spectra, the linewidth, and the intensity of dependence on temperature. An analysis based on models that are frequently used in the literature led to completely different conclusions about the intrinsic NC emission properties extracted from spectra measured in points with different contribution of the PL from the aggregates. Our results demonstrate that extreme care has to be used in order to correctly correlate the spectral PL features with the intrinsic emission properties of lead halide perovskite NC films.

Laser-Driven Growth of Semiconductor Nanowires from Colloidal Nanocrystals

Semiconductor nanowire production through vapor- and solution-based processes has propelled nanowire systems toward a wide range of technological applications. Although vapor-based nanowire syntheses enable precise control over nanowire composition and phase, they typically employ batch processes with specialized pressure management systems, limiting throughput. Solution-based nanowire growth processes have improved scalability but can require even more extensive pressure and temperature management systems. Here, we demonstrate a solution-based nanowire growth process that utilizes the large Young-Laplace interfacial surface pressures and collective heating effects of colloidal metal nanocrystals under irradiation to drive nanowire growth photothermally. Laser irradiation of a solution containing metal nanocrystals and semiconductor precursors facilitates rapid heating, precursor decomposition, and nanowire growth on a benchtop in simple glassware under standard conditions, potentially enabling a range of solution-based experiments including in-line combinatorial identification of optimized reaction parameters, in situ measurements, and the production of nanowires with complex compositions.

Multilayer Diffraction Reveals That Colloidal Superlattices Approach the Structural Perfection of Single Crystals

Colloidal superlattices are fascinating materials made of ordered nanocrystals, yet they are rarely called "atomically precise". That is unsurprising, given how challenging it is to quantify the degree of structural order in these materials. However, once that order crosses a certain threshold, the constructive interference of X-rays diffracted by the nanocrystals dominates the diffraction pattern, offering a wealth of structural information. By treating nanocrystals as scattering sources forming a self-probing interferometer, we developed a multilayer diffraction method that enabled the accurate determination of the nanocrystal size, interparticle spacing, and their fluctuations for samples of self-assembled CsPbBr3 and PbS nanomaterials. The multilayer diffraction method requires only a laboratory-grade diffractometer and an open-source fitting algorithm for data analysis. The average nanocrystal displacement of 0.33 to 1.43 Å in the studied superlattices provides a figure of merit for their structural perfection and approaches the atomic displacement parameters found in traditional crystals.

Multilayer Diffraction Reveals That Colloidal Superlattices Approach the Structural Perfection of Single Crystals

Colloidal superlattices are fascinating materials made of ordered nanocrystals, yet they are rarely called "atomically precise". That is unsurprising, given how challenging it is to quantify the degree of structural order in these materials. However, once that order crosses a certain threshold, the constructive interference of X-rays diffracted by the nanocrystals dominates the diffraction pattern, offering a wealth of structural information. By treating nanocrystals as scattering sources forming a self-probing interferometer, we developed a multilayer diffraction method that enabled the accurate determination of the nanocrystal size, interparticle spacing, and their fluctuations for samples of self-assembled CsPbBr₃ and PbS nanomaterials. The multilayer diffraction method requires only a laboratory-grade diffractometer and an open-source fitting algorithm for data analysis. The average nanocrystal displacement of 0.33 to 1.43 Å in the studied superlattices provides a figure of merit for their structural perfection and approaches the atomic displacement parameters found in traditional crystals.

Development of Quantum Dot (QD) Based Color Converters for Multicolor Display

Many displays involve the use of color conversion layers. QDs are attractive candidates as color converters because of their easy processability, tuneable optical properties, high photoluminescence quantum yield, and good stability. Here, we show that emissive QDs with narrow emission range can be made in-situ in a polymer matrix, with properties useful for color conversion. This was achieved by blending the blue-emitting pyridine based polymer with a cadmium selenide precursor and baking their films at different temperatures. To achieve efficient color conversion, blend ratio and baking temperature/time were varied. We found that thermal decomposition of the precursor leads to highly emissive QDs whose final size and emission can be controlled using baking temperature/time. The formation of the QDs inside the polymer matrix was confirmed through morphological studies using atomic force microscopy (AFM) and transmission electron microscopy (TEM). Hence, our approach provides a cost-effective route to making highly emissive color converters for multi-color displays.

Seeded Growth of Au@CuxO Core-Shell Mesoporous Nanospheres and Their Photocatalytic Properties

We report a facile synthesis of Au@CuxO core-shell mesoporous nanospheres with tunable size in the aqueous phase via seeded growth. The success of the current work relies on the use of a halide-free copper (Cu) precursor and n-oleyl-1,3-propanediamine as a capping agent to facilitate the formation of a copperish oxide shell with a mesoporous structure and the presence of mixed oxidation states of Cu. By varying the amount of spherical Au seeds while keeping other parameters unchanged, their diameters could be readily tuned without noticeable change in morphology. As compared with commercial Cu2O, the as-prepared Au@CuxO core-shell mesoporous nanospheres exhibit the higher adsorption ability, enhanced activity, and excellent stability toward photocatalytic degradation of methyl orange (MO) under visible light irradiation, indicating their potential applications in water treatment.

In Vitro Caco-2 Cell Permeability Studies of Ziprasidone Hydrochloride Monohydrate Nanocrystals

Objectives

The current study focused on the evaluation of the cytotoxic effect and permeability of ziprasidone hydrochloride monohydrate (ZHM) nanocrystals on Caco-2 cells.

Materials and Methods

ZHM nanocrystals were prepared by the microfluidization method in the presence of polyvinylpyrrolidone as a stabilizer. Particle size (PS), particle size distribution (PDI), and zeta potential (ZP) values were measured in characterization studies. In vitro cytotoxic effects of ZHM nanocrystals were investigated using the 3-(4,5-dimetylthiazol-2-yl)-2,5-diphenyltetrazolium bromide test. Caco-2 transport studies were conducted with formulations of ZHM coarse powder and nanocrystals.

Results

Nanocrystals were obtained with 400-600 nm PS, 0.1-0.4 PDI, and >20 mV ZP values. The cell viability remained 100% for all sample groups. The permeability value of ZHM nanocrystals through Caco-2 cells increased 2.3-fold in comparison with ZHM coarse powder. Cumulative drug transport also increased at the end of the sampling period.

Conclusion

Nanocrystal technology helps to increase the permeability of drug particles by increasing the saturation solubility.

Development and Characterization of Venetoclax Nanocrystals for Oral Bioavailability Enhancement

Venetoclax (VX) used in the treatment of chronic lymphocytic leukemia possesses low oral bioavailability (5.4%) and undergoes first-pass metabolism. Development of a formulation to overcome its bioavailability problem can be done by using nanocrystals which has many scientific applications. Nanocrystals of VX were formulated using amalgamation of precipitation and high-pressure homogenization method, in which polyvinyl alcohol (PVA) was selected as stabilizer. Process parameters like concentration of stabilizer, homogenization pressure, number of homogenization cycle, and concentration of lyoprotectant were optimized to obtain the desired particle size for the preparation of nanocrystal formulation. HPLC methods were developed and validated in-house for determination of in vitro dissolution data and in vivo bioavailability data. Physicochemical characterization was done to determine the particle size (zeta sizer), crystalline nature (DSC and XRPD), solubility (shaker bath), and dissolution (USP type 2 apparatus). Lyophilized VX nanocrystals of size less than 350 nm showed substantial increase in saturation solubility (~20 folds) and dissolution in comparison with free VX. In vitro release study revealed that 100% dissolution was achieved in 120 min as compared to VX free base which is having less than 43.5% dissolution in 120 min. Formulations of VX remain stable for 6 months under accelerated stability conditions. In vivo pharmacokinetic data in male Sprague-Dawley rats showed (~2.02 folds) significant increase in oral bioavailability of VX formulation as compared to free drug because of rapid dissolution and absorption which makes the nanocrystal formulation a better approach for oral administration of poorly soluble drugs.

High Effective Preparation of Amorphous-Like Si Nanoparticles Using Spark Erosion Followed by Bead Milling

This work aims to prepare the silicon nanoparticles with the nanocrystal-embedded amorphous structure through spark erosion followed by bead milling. Spark erosion breaks up monocrystal silicon ingots into micro/nanoparticles, refines the crystal grains, makes the crystals randomly disordered, and increases isotropic character. Bead milling further refines the crystal grains to a few nanometers and increases the amorphous portion in the structure, eventually forming an amorphous structure with the nanocrystals embedded. Spark erosion saves much time and energy for bead milling. The crystallite size and the amount of amorphous phase could be controlled through varying pulse durations of spark discharge and bead milling time. The final particles could contain the nanocrystals as small as 4 nm and the content of amorphous phase as high as 84% and could be considered as amorphous-like Si nanoparticles. This processing route for Si nanoparticles greatly reduced the production time and the energy consumption and, more importantly, is structure-controllable and scalable for mass production of the products with higher purity.

A rutin nanocrystal gel as an effective dermal delivery system for enhanced anti-photoaging application

As a natural flavonoid compound, rutin could scavenge free radicals effectively to achieve remarkable antioxidant and anti-photoaging activity. Unfortunately, the extremely low water solubility of rutin often leads to the poor percutaneous permeability and unsatisfactory bioavailability, which has greatly restricted its clinical application. In this study, a novel freeze-dried rutin nanocrystal was developed to improve its saturation solubility, which was further redispersed in carbopol gel to formulate the targeted rutin nanocrystal gel (NC-gel) for enhanced transdermal delivery efficiency. Benefit from the advantages of NC-gel, the permeated amounts of rutin on mice in the NC-gel group was more than three times enhancement over that of the coarse drug gel group. Furthermore, the results of pharmacodynamic studies in vivo demonstrated that NC-gel could effectively prevent the skin photoaging and tissue damage induced by UV irradiation. Taken together, these results validated that NC-gel was an ideal carrier for the epidermal application of rutin to obtain excellent anti-photoaging effect, which further might provide a valuable platform for improving the transdermal bioavailability of insoluble drugs.

Janus-like Jagged Structure with Nanocrystals for Self-Sorting Wearable Tactile Sensor

In this study, a self-sorting sensor was developed with the ability to distinguish between different pressure regimes and translate the pressure to electrical signals. Specifically, the self-sorting sensor can distinguish between soft and hard pressure like the human skin, without any software assistance and complicated circuits. To achieve the self-sorting property, Janus-like jagged structures were prepared via an all-solution process of spontaneous chemical patterning; they comprised electrically semi-insulating vertices and highly conductive valleys. This unique structure facilitates the detection and determination of the intensities and types of pressure by providing a significant gap between the current levels of two types of states, similar to the function of fibers in the human tactile system. The fabricated sensors also exhibit high sensitivity and durability as well as low power consumption, as demonstrated by the electronic skin and ternary Morse signal applications. Compared with conventional wearable pressure sensors, this sensor can detect signals without additional programming; thus, it is highly suitable for delay-sensitive, energy-efficient sensor applications such as driverless vehicles, autonomous artificial intelligence technology, and prosthetic devices.

Can the cavi-precipitation process be exploited to generate smaller size drug nanocrystal?

OBJECTIVE

Cavi-precipitation has the potential to generate drug nanocrystals very efficiently. Achieving smaller than 100 nm particle size for organic drug substances still remained a challenge. The objective of this study was to demonstrate if cavi-precipitation technology can be used to generate smaller than 100 nm drug nanocrystal particle.

SIGNIFICANCE

This study demonstrates that cavi-precipitation process can be used to generate drug nanocrystals of the model compound resveratrol (RVT) consists of crystallites of 30-50 nm size.

METHOD

RVT was dissolved in different organic solvents to prepare the solvent phase (S-phase). Several stabilizers were tested for the organic phase. A combination of SDS and PVP was used stabilizer system in the aqueous anti-solvent phase (AS-phase). The S-phase was added to the AS-phase inside the Emulsiflex C5 homogenizer. Nanosuspension was characterized by laser diffractometry (LD), photon correlation spectroscopy (PCS) and scanning electron microscopy (SEM). The solid state of the suspended particles was investigated by powder X-ray diffractometry (PXRD) and differential scanning calorimetry (DSC).

RESULTS

It was found that DMSO, alone or in combination with acetone in the S-Phase generated the smallest size RVT nanocrystals. The optimum solvent (S) antisolvent (AS) ratio (S:AS) was found to be 3.6:56.4 (v:v). Span 20 was identified as the best stabilizer for the organic phase at a ratio (w:w) of 1:3 (Span 20:RVT). The particles precipitated from different solvents were predominantly crystalline.

CONCLUSIONS

The best sample had a mean particle size (LD) of 167 nm [d(0.5)] which was composed of smaller crystallites having 30-50 nm size (SEM).

Influence of Fine Grains on the Bending Fatigue Behavior of Two Implant Titanium Alloys

By means of the ultrasonic surface impact (amplitude of 30 μm, strike number of 48,000 times/mm²), nanograins have been achieved in the surfaces of both Ti6Al4V(TC4) and Ti3Zr2Sn3Mo25Nb(TLM) titanium alloys, mainly because of the dislocation motion. Many mechanical properties are improved, such as hardness, residual stress, and roughness. The rotating–bending fatigue limits of TC4 and TLM subjected to ultrasonic impact are improved by 13.1% and 23.7%, separately. Because of the bending fatigue behavior, which is sensitive to the surface condition, cracks usually initiate from the surface defects under high stress amplitude. By means of an ultrasonic impact tip with the size of 8 mm, most of the inner cracks present at the zone with a depth range of 100~250 μm in the high life region. The inner crack core to TC4 usually appears as a deformed long and narrow α-phase, while the cracks in TLM specimens prefer to initiate at the triple grain boundary junctions. This zone crosses the grain refined layer and the deformed coarse grain layer. With the gradient change of elastic parameters, the model shows an increase of normal stress at this zone. Combined with the loss of plasticity and toughness, it is easy to understand these fatigue behaviors.