Gelatin Sponges with a Uniform Interoperable Pore Structure and Biodegradability for Liver Injury Hemostasis and Tissue Regeneration

Developing a hemostatic sponge that can effectively control bleeding from visceral injuries while guiding in situ tissue regeneration in incompressible wounds remains a challenge. Most of the existing hemostatic sponges degrade slowly, are relatively single-functioning, and cannot cope with complex environments. Herein, a biodegradable rapidly hemostatic sponge (GPZ) was created by dual-dynamic-bond cross-linking among Zn2+, protocatechualdehyde (PA)-containing catechol and aldehyde groups, and gelatin. GPZ had a uniformly distributed interconnected pore structure with excellent fluid absorption. It could effectively absorb the oozing blood and increase the blood concentration while stimulating platelet activation and accelerating blood coagulation. Compared to commercial hemostats, GPZ treatment significantly accelerated hemostasis in the rat liver defect model (∼0.33 min, ≥50% reduction in the hemostatic time) and in the rabbit liver defect model (∼1.02 min, ≥60% reduction in the hemostatic time). Additionally, GPZ had excellent antibacterial and antioxidant properties that effectively protected the wound from infection and excessive inflammation. In the liver regeneration model, GPZ significantly increased the rate of hepatic tissue repair and promoted rapid functional recovery without complications and adverse reactions. Overall, we designed a simple and effective biodegradable rapid hemostatic sponge with good clinical translational potential for treating lethal incompressible bleeding and promoting wound healing.

Regeneration of Pancreatic Cells Using Optimized Nanoparticles and l-Glutamic Acid-Gelatin Scaffolds with Controlled Topography and Grafted Activin A/BMP4

Regeneration of insulin-producing cells (IPCs) from induced pluripotent stem cells (iPSCs) under controlled conditions has a lot of promise to emulate the pancreatic mechanism in vivo as a foundation of cell-based diabetic therapy. l-Glutamic acid-gelatin scaffolds with orderly pore sizes of 160 and 200 μm were grafted with activin A and bone morphogenic proteins 4 (BMP4) to differentiate iPSCs into definitive endoderm (DE) cells, which were then guided with fibroblast growth factor 7 (FGF7)-grafted retinoic acid (RA)-loaded solid lipid nanoparticles (FR-SLNs) to harvest IPCs. Response surface methodology was adopted to optimize the l-glutamic acid-to-gelatin ratio of scaffolds and to optimize surfactant concentration and lipid proportion in FR-SLNs. Experimental results of immunofluorescence, flow cytometry, and western blots revealed that activin A (100 ng/mL)-BMP4 (50 ng/mL)-l-glutamic acid (5%)-gelatin (95%) scaffolds provoked the largest number of SOX17-positive DE cells from iPSCs. Treatment with FGF7 (50 ng/mL)-RA (600 ng/mL)-SLNs elicited the highest number of PDX1-positive β-cells from differentiated DE cells. To imitate the natural pancreas, the scaffolds with controlled topography were appropriate for IPC production with sufficient insulin secretion. Hence, the current scheme using FR-SLNs and activin A-BMP4-l-glutamic acid-gelatin scaffolds in the two-stage differentiation of iPSCs can be promising for replacing impaired β-cells in diabetic management.

Fiber-reinforced gelatin/β-cyclodextrin hydrogels loaded with platelet-rich plasma-derived exosomes for diabetic wound healing

Diabetic complications with high-glucose status (HGS) cause the dysregulated autophagy and excessive apoptosis of multiple-type cells, leading to the difficulty in wound self-healing. Herein, we firstly developed fiber-reinforced gelatin (GEL)/β-cyclodextrin (β-CD) therapeutic hydrogels by the modification of platelet-rich plasma exosomes (PRP-EXOs). The GEL fibers that were uniformly dispersed within the GEL/β-CD hydrogels remarkably enhanced the compression strengths and viscoelasticity. The PRP-EXOs were encapsulated in the hydrogels via the covalent crosslinking between the PRP-EXOs and genipin. The diabetic rat models demonstrated that the GEL/β-CD hydrogels and PRP-EXOs cooperatively promoted diabetic wound healing. On the one hand, the GEL/β-CD hydrogels provided the biocompatible microenvironments and active components for cell adhesion, proliferation and skin tissue regeneration. On the other hand, the PRP-EXOs in the therapeutic hydrogels significantly activated the autophagy and inhibited the apoptosis of human umbilical vein endothelial cells (HUVECs) and human skin fibroblasts (HSFs). The activation of autophagy and inhibition of apoptosis in HUVECs and HSFs induced the blood vessel creation, collagen formation and re-epithelialization. Taken together, this work proved that the incorporation of PRP-EXOs in a wound dressing was an effective strategy to regulate autophagy and apoptosis, and provide a novel therapeutic platform for diabetic wound healing.

Injectable and self-healing dual crosslinked gelatin/kappa-carrageenan methacryloyl hybrid hydrogels via host-guest supramolecular interaction for wound healing

Injectable hydrogels based on natural polymers have shown great potential for various tissue engineering applications, such as wound healing. However, poor mechanical properties and weak self-healing ability are still major challenges. In this work, we introduce a host-guest (HG) supramolecular interaction between acrylate-β-cyclodextrin (Ac-β-CD) conjugated on methacrylated kappa-carrageenan (MA-κ-CA) and aromatic residues on gelatin to provide self-healing characteristics. We synthesize an MA-κ-CA to conjugate Ac-β-CD and fabricate dual crosslinked hybrid hydrogels with gelatin to mimic the native extracellular matrix (ECM). The dual crosslinking occurs on the MA-κ-CA backbone through the addition of KCl and photocrosslinking process, which enhances mechanical strength and stability. The hybrid hydrogels exhibit shear-thinning, self-healing, and injectable behavior, which apply easily under a minimally invasive manner and contribute to shear stress during the injection. In-vitro studies indicate enhanced cell viability. Furthermore, scratch assays are performed to examine cell migration and cell-cell interaction. It is envisioned that the combination of self-healing and injectable dual crosslinked hybrid hydrogels with HG interactions display a promising and functional biomaterial platform for wound healing applications.

Nanofibrous polycaprolactone/gelatin scaffold containing gold nanoparticles: Physicochemical and biological characterization for wound healing

In this study, gold nanoparticles were loaded into poly (ε-caprolactone) (PCL)/gelatin nanofibrous matrices to fabricate a potential wound dressing. The mats were produced by electrospinning of PCL/gelatin solution supplemented with synthesized gold nanoparticles (200, 400 and 800 ppm). Prepared scaffolds were investigated regarding their chemical properties, morphology, mechanical properties, surface wettability, water-uptake capacity, water vapor permeability, porosity, blood compatibility, microbial penetration test and cellular response. In addition to in vivo study, a full-thickness excisional wound in a rat model was used to evaluate the healing effect of prepared scaffolds. Results showed appropriate mechanical properties and porosity of prepared scaffolds. With L929 cells, the PCL/gelatin scaffold containing 400 ppm gold nanoparticles demonstrated the greatest cell growth. In vivo results validated the favorable wound-healing benefits of the scaffold incorporating gold nanoparticles, which triggered wound healing compared to sterile gauze. Our results showed the capability of nanofibrous matrices containing gold nanoparticles for successful wound treatment.

Assessment of acute toxicity of crude extract rich in carotenoids from Cantaloupe melon (Cucumis melo L.) and the gelatin-based nanoparticles using the zebrafish (Danio rerio) model

Cantaloupe melon is known for its carotenoid-rich orange pulp. However, carotenoids are sensitive to oxygen, light, and heat, potentially reducing their benefits. Nanoencapsulation can preserve these benefits but raises concerns about toxicity. We aimed to assess the safety and bioactive potential of crude extract-rich carotenoids (CE) and nanoparticles based on gelatin loaded with CE (EPG) by investigating parameters such as cardio or neurotoxicity, especially acute toxicity. EPG was obtained by O/W emulsification and characterized by different methods. Zebrafish embryos were exposed to CE and EPG at 12.5 mg/L and 50 mg/L for 96h and were investigated for survival, hatching, malformations, and seven days post fertilization (dpf) larvae's visual motor response. Adult fish underwent behavioral tests after acute exposure of 96h. CE and EPG showed no acute toxicity in zebrafish embryos, and both improved the visual motor response in 7dpf larvae (p = 0.01), suggesting the potential antioxidant and provitamin A effect of carotenoids in cognitive function and response in the evaluated model. Adult fish behavior remained with no signs of anxiety, stress, swimming pattern changes, or sociability that would indicate toxicity. This study highlights the safety and potential benefits of carotenoids in zebrafish. Further research is needed to explore underlying mechanisms and long-term effects.

Gelatin/polyethylene glycol-loaded magnesium hydroxide nanocomposite to attenuate acetylcholinesterase, neurotoxicity, and activation of GPR55 protein in rat models of Alzheimer's disease

Alzheimer's disease (AD) is a neurodegenerative disease marked by mitochondrial dysfunction, amyloid-β (Aβ) aggregation, and neuronal cell loss. G-protein-coupled receptor 55 (GPR55) has been used as a promising target for insulin receptors in diabetes therapy, but GPR55's role in AD is still unidentified. Gelatin (GE) and polyethylene glycol (PEG) polymeric hydrogels are commonly used in the drug delivery system. Therefore, the aim of the present study was the preparation of magnesium hydroxide nanocomposite using Clitoria ternatea (CT) flower extract, GE, and PEG (GE/PEG/Mg(OH)2NCs) by the green precipitation method. The synthesized GE/PEG/Mg(OH)2NCs were used to determine the effect of GPR55 activation of intracerebroventricular administration on streptozotocin (ICV-STC)-induced cholinergic dysfunction, oxidative stress, neuroinflammation, and cognitive deficits. The GE/PEG/Mg(OH)2NCs were administered following bilateral ICV-STC administration (3 mg/kg) in experimental rats. Neurobehavioral assessments were performed using a Morris water maze (MWM) and a passive avoidance test (PA). Cholinergic and antioxidant activity, oxidative stress, and mitochondrial complex activity were estimated in the cortex and hippocampus through biochemical analysis. Inflammatory markers (TNF-α, IL-6, and IL-1β) were determined using the ELISA method. Our study results demonstrated that the GE/PEG/Mg(OH)2NCs treatment significantly improved spatial and non-spatial memory functions in behavioral studies. Moreover, the treatment with GE/PEG/Mg(OH)2NCs group significantly attenuated cholinergic dysfunction, oxidative stress, and inflammatory markers, and also highly improved anti-oxidant activity (GSH, SOD, CAT, and GPx) in the cortex and hippocampus regions. The western blot results suggest the activation of the GPR55 protein expression through GE/PEG/Mg(OH)2NCs. The histopathological studies showed clear cytoplasm and healthy neurons, effectively promoting neuronal activity. Furthermore, the molecular docking results demonstrated the binding affinity and potential interactions of the compounds with the AChE enzyme. In conclusion, the GE/PEG/Mg(OH)2NCs treated groups showed reduced neurotoxicity and have the potential as a therapeutic agent to effectively target AD.

A Natural Self-Assembled Gel-Sponge with Hierarchical Porous Structure for Rapid Hemostasis and Antibacterial

Developing hemostatic agents with reliable biosafety and high efficiency has paramount clinical significance for saving lives. Herein, inspired from traditional Chinese medicine, a sponge (BC-S) with hierarchical porous structure is proposed for the treatment of bleeding. The BC-S is prepared by a simple self-assembly method employing Bletilla Striata polysaccharide and quaternary amine alkaloids (QA) from Bletilla Striata and Coptidis Rhizoma. The ideal cation donor encapsulated in the helical structure of BSP enlarges the inter-layer space of sponge by the action of electrostatic repulsion, forming wider channels which can accelerate the diversion speed of absorbed blood. Then, platelets and erythrocytes are trapped tightly in the reticular structure and extruded to deformation, activation. Subsequently, fibrin network forms and reinforces the internal multilayer mesh, blocks the outflow of blood. QA is released from the sponge skeleton mainly driven by a combination of surface erosion and potentially solution diffusion among pore to provide long-term antibacterial activity. Benefiting from the well-designed structure and the effective hemostatic mechanism, the BC-S displays more excellent hemostatic performance in different models in vivo and in vitro compared with typical gelatin hemostatic sponge. This work is expected to boost the development of emerging hemostatic agents.

Gelatin-based 3D biomimetic scaffolds platform potentiates culture of cancer stem cells in esophageal squamous cell carcinoma

Cancer stem cells (CSCs) are crucial for tumorigenesis, metastasis, and therapy resistance in esophageal squamous cell carcinoma (ESCC). To further elucidate the mechanism underlying characteristics of CSCs and develop CSCs-targeted therapy, an efficient culture system that could expand and maintain CSCs is needed. CSCs reside in a complex tumor microenvironment, and three-dimensional (3D) culture systems of biomimetic scaffolds are expected to better support the growth of CSCs by recapitulating the biophysical properties of the extracellular matrix (ECM). Here, we established gelatin-based 3D biomimetic scaffolds mimicking the stiffness and collagen content of ESCC, which could enrich ESCC CSCs efficiently. Biological changes of ESCC cells laden in scaffolds with three different viscoelasticity emulating physiological stiffness of esophageal tissues were thoroughly investigated in varied aspects such as cell morphology, viability, cell phenotype markers, and transcriptomic profiling. The results demonstrated the priming effects of viscoelasticity on the stemness of ESCC. The highly viscous scaffolds (G': 6-403 Pa; G'': 2-75 Pa) better supported the enrichment of ESCC CSCs, and the TGF-beta signaling pathway might be involved in regulating the stemness of ESCC cells. Compared to two-dimensional (2D) cultures, highly viscous scaffolds significantly promoted the clonal expansion of ESCC cells in vitro and tumor formation ability in vivo. Our findings highlight the crucial role of biomaterials' viscoelasticity for the 3D culture of ESCC CSCs in vitro, and this newly-established culture system represents a valuable platform to support their growth, which could facilitate the CSCs-targeted therapy in the future.

A new composite fabricated from hydroxyapatite, gelatin-MgO microparticles, and compatibilized poly(butylene succinate) with osteogenic functionality

In this study, thermally processed recycled fish teeth (FT) and fish scales, magnesium oxide (MgO), and biobased polyesters were fabricated into new bioactive and environmentally friendly composites. The magnesium oxide was encapsulated into laboratory-made fish scale-derived gelatin to form gelatin-MgO microparticles. Hydroxyapatite (HA) and gelatin were obtained by heat-treating FTs and fish scales, respectively. Compatibilized poly(butylene succinate) (CPBS), i.e., poly(butylene succinate) (PBS) to which had been added acrylic acid-grafted PBS (PBS-g-AA) compatibilizer, was combined with HA/gelatin-MgO (GHA) to form CPBS/GHA composites. The structure and tensile properties of the composites were investigated. The CPBS/GHA composites improved the adhesion and proliferation of osteoblast cells. Osteoblast growth, osteoclast growth inhibition, and the antibacterial effect of CPBS/GHA composites were primarily due to the slow release of magnesium ions into the environment from the gelatin-MgO microparticles. Higher levels of calcium and phosphorus species were observed for various PBS/HA and CPBS/GHA composites immersed in simulated body fluid. Mineralization measurements indicated that calcium and phosphate ions precipitated in osteoblasts placed on PBS/HA and CPBS/GHA composites. The study successfully developed a new composite material containing 5 wt% gelatin/MgO (phr), CPBS/HA 10 wt% and 1.0 % gelatin/MgO (an optimum formula of MgO). This composite exhibited superior tensile strength, antibacterial effect, osteoclast growth enhancement, and osteoclast growth reduction. These results suggest that the composites may facilitate the formation of new bone formation in vivo. The CPBS/GHA composites displayed good bone tissue repair ability in engineering applications.

Delivery and Transcriptome Assessment of an In Vitro Three-Dimensional Proximal Tubule Model Established by Human Kidney 2 Cells in Clinical Gelatin Sponges

The high prevalence of kidney diseases and the low identification rate of drug nephrotoxicity in preclinical studies reinforce the need for representative yet feasible renal models. Although in vitro cell-based models utilizing renal proximal tubules are widely used for kidney research, many proximal tubule cell (PTC) lines have been indicated to be less sensitive to nephrotoxins, mainly due to altered expression of transporters under a two-dimensional culture (2D) environment. Here, we selected HK-2 cells to establish a simplified three-dimensional (3D) model using gelatin sponges as scaffolds. In addition to cell viability and morphology, we conducted a comprehensive transcriptome comparison and correlation analysis of 2D and 3D cultured HK-2 cells to native human PTCs. Our 3D model displayed stable and long-term growth with a tubule-like morphology and demonstrated a more comparable gene expression profile to native human PTCs compared to the 2D model. Many missing or low expressions of major genes involved in PTC transport and metabolic processes were restored, which is crucial for successful nephrotoxicity prediction. Consequently, we established a cost-effective yet more representative model for in vivo PTC studies and presented a comprehensive transcriptome analysis for the systematic characterization of PTC lines.

Combined Molybdenum Gelatine Methacrylate Injectable Nano-Hydrogel Effective Against Diabetic Bone Regeneration

Introduction

Bone defects in diabetes mellitus (DM) remain a major challenge for clinical treatment. Fluctuating glucose levels in DM patients lead to excessive production of reactive oxygen species (ROS), which disrupt bone repair homeostasis. Bone filler materials have been widely used in the clinical treatment of DM-related bone defects, but overall they lack efficacy in improving the bone microenvironment and inducing osteogenesis. We utilized a gelatine methacrylate (GelMA) hydrogel with excellent biological properties in combination with molybdenum (Mo)-based polyoxometalate nanoclusters (POM) to scavenge ROS and promote osteoblast proliferation and osteogenic differentiation through the slow-release effect of POM, providing a feasible strategy for the application of biologically useful bone fillers in bone regeneration.

Methods

We synthesized an injectable hydrogel by gelatine methacrylate (GelMA) and POM. The antioxidant capacity and biological properties of the synthesized GelMA/POM hydrogel were tested.

Results

In vitro, studies showed that hydrogels can inhibit excessive reactive oxygen species (ROS) and reduce oxidative stress in cells through the beneficial effects of pH-sensitive POM. Osteogenic differentiation assays showed that GelMA/POM had good osteogenic properties with upregulated expression of osteogenic genes (BMP2, RUNX2, Osterix, ALP). Furthermore, RNA-sequencing revealed that activation of the PI3K/Akt signalling pathway in MC3T3-E1 cells with GelMA/POM may be a potential mechanism to promote osteogenesis. In an in vivo study, radiological and histological analyses showed enhanced bone regeneration in diabetic mice, after the application of GelMA/POM.

Conclusion

In summary, GelMA/POM hydrogels can enhance bone regeneration by directly scavenging ROS and activating the PI3K/Akt signalling pathway.

Multifunctional magnetocaloric bone cement with a time-varying alkaline microenvironment for sequential bacterial inhibition, angiogenesis and osteogenesis

Repairing infected bone defects remains a severe challenge due to antibiotic abuse and recurrence. Hence, we modified magnetocaloric Fe3O4 nanoparticles and added them to magnesium calcium phosphate bone cement (MCPC) to fabricate multifunctional magnetic composites for sequential bacterial inhibition, angiogenesis and osteogenesis. Nevertheless, high doses of Mg ions and Fe ions were released from MCPC, which adversely affected osteogenesis. Thus, Fe3O4 was modified using gelatin according to the emulsification crosslinking method, which exhibited a controllable magnetocaloric effect and degradation behavior, and favorable anti-bacterial ability under the action of an alternating magnetic field (AMF). In the early stage, the residual MgO created a local strong alkaline microenvironment by hydrolysis, which inhibited the function and activity of S. aureus and E. coli. At the later stage, the MCPC composites were controllably degraded under the function of gelatin and maintained a long-term local slight alkaline microenvironment that promoted the osteogenic differentiation and mineralization of BMSCs. In vivo subcutaneous implantation experiments further indicated that MCPC composites showed good biocompatibility and facilitated angiogenesis, presenting a promising future in magnetic materials design and infectious bone defect repair.

An In Vitro and Ex Vivo Analysis of the Potential of GelMA Hydrogels as a Therapeutic Platform for Preclinical Spinal Cord Injury

Spinal cord injury (SCI) is a devastating condition with no curative therapy currently available. Immunomodulation can be applied as a therapeutic strategy to drive alternative immune cell activation and promote a proregenerative injury microenvironment. Locally injected hydrogels carrying immunotherapeutic cargo directly to injured tissue offer an encouraging treatment approach from an immunopharmacological perspective. Gelatin methacrylate (GelMA) hydrogels are promising in this regard, however, detailed analysis on the immunogenicity of GelMA in the specific context of the SCI microenvironment is lacking. Here, the immunogenicity of GelMA hydrogels formulated with a translationally relevant photoinitiator is analyzed in vitro and ex vivo. 3% (w/v) GelMA, synthesized from gelatin type-A, is first identified as the optimal hydrogel formulation based on mechanical properties and cytocompatibility. Additionally, 3% GelMA-A does not alter the expression profile of key polarization markers in BV2 microglia or RAW264.7 macrophages after 48 h. Finally, it is shown for the first time that 3% GelMA-A can support the ex vivo culture of primary murine organotypic spinal cord slices for 14 days with no direct effect on glial fibrillary acidic protein (GFAP+ ) astrocyte or ionized calcium-binding adaptor molecule 1 (Iba-1+ ) microglia reactivity. This provides evidence that GelMA hydrogels can act as an immunotherapeutic hydrogel-based platform for preclinical SCI.

Corrosion-tailoring, osteogenic, anti-inflammatory, and antibacterial aspirin-loaded organometallic hydrogel composite coating on biodegradable Zn for orthopedic applications

Zn and its alloys are receiving increasing interest for biodegradable orthopedic implant applications owing to their moderate corrosion rate and the potential functionality of Zn2+. However, their non-uniform corrosion behavior and insufficient osteogenic, anti-inflammatory, and antibacterial properties do not meet the comprehensive requirements of orthopedic implants in clinical use. Herein, an aspirin (an acetylsalicylic acid, ASA, 10, 50, 100, and 500 mg/L)-loaded carboxymethyl chitosan (CMC)/gelatin (Gel)-Zn2+ organometallic hydrogel composite coating (CMC/Gel&Zn2+/ASA) was fabricated on a Zn surface via an alternating dip-coating method, aiming to obtain a material with these comprehensive properties improved. The organometallic hydrogel composite coatings, ca. 12-16 μm in thickness, showed compact, homogeneous, and micro-bulge structured surface morphology. The coatings protected well the Zn substrate from pitting/localized corrosion and contained the release of the bioactive components, Zn2+ and ASA, in a sustained and stable manner in long-term in vitro immersions in Hank's solution. The coated Zn showed greater ability to promote proliferation and osteogenic differentiation for MC3T3-E1 osteoblasts, and better anti-inflammatory capacity when compared with uncoated Zn. Additionally, this coating displayed excellent antibacterial activity against both Escherichia coli (>99 % antibacterial rate) and Staphylococcus aureus (>98 % antibacterial rate). Such appealing properties can be attributed to the compositional nature of the coating, namely the sustained release of Zn2+ and ASA, as well as the surface physiochemical properties because of its unique microstructure. This organometallic hydrogel composite coating can be considered a promising option for the surface modification of biodegradable Zn-based orthopedic implants among others.

Fabrication of gelatin methacryloyl/graphene oxide conductive hydrogel for bone repair

The ideal bone repair materials possess a series of properties, such as injectability, good mechanical properties and bone inducibility. In the present study, gelatin methacryloyl (GelMA) and graphene oxide (GO) were selected to prepare conductive hydrogel by changing the concentration of GelMA and GO during the cross-link process. The effects of different contents of GelMA and GO to the hydrogel performance were investigated. The results showed that the mechanical properties of the hydrogel kept 16.37 ± 1.89 KPa after adding 0.1% GO, while the conductivity was improved to 1.36 ± 0.09 μS/cm. The porosity of hydrogel before and after mineralization could reach more than 90%. The mechanical properties of mineralized hydrogel was improved significantly, could reach 26.38 ± 2.29 KPa. Cell experiments indicated that the mineralized hydrogel with electrical stimulation obviously improve the alkaline phosphatase activity of the cells. GelMA/GO conductive hydrogel could be a promising candidate for bone repair and bone tissue engineering.

Gymnemic acid-conjugated gelatin scaffold for enhanced bone regeneration: A novel insight to tissue engineering

Bone tissue engineering deals with the design of bone scaffolds. The selection of porous scaffold for osteoblast attachment and suppression of microbial infections are the major challenges that were addressed by designing gelatin scaffolds conjugated with gymnemic acid. Gelatin scaffold was prepared by loading gymnemic acid and morphological characterization, porosity, water absorption behavior, and biocompatibility of the scaffold were studied. The scaffold was introduced to the rat calvarial bone defect (BD) and analyzed the serum C reactive protein, alkaline phosphatase activity, and histology for 1 month to study the reconstruction. Adult Sprague-Dawley rats were used as sham operated control, animal with BD, and animal with BD which was implanted with scaffold (BDMB). The scanning electron micrograph revealed porous nature of scaffold. There was no significant difference in water absorption ability of scaffold. The C reactive protein was not observed in the serum collected on the 5th day postsurgery, supported the biocompatibility. The alkaline phosphatase activity in BDMB was increased when compared with BD on 15th and 20th day and then decreased. New bone tissue formation was detected with hematoxylin-eosin staining. The scaffold is effective in enhancing bone regeneration, which will have therapeutic significance in orthopedics and dentistry.

A Janus supramolecular hydrogel prepared by one-pot method for wound dressing

Despite the adhesive hydrogels have gained progress and popularity, it is still an enormous challenge to develop a smart adhesion hydrogel for clinical medicine, which is an asymmetric adhesion hydrogel with on-demand detachment. Motivated by the thermal phase transition mechanism of gelatin, we have synthesized a Janus supramolecular hydrogel dressing with skin temperature-triggered adhesion by a simple one-pot process. This hydrogel has asymmetric and controllable adhesion, which not only can become the external objects barrier but also can achieve repeated adhesion and on-demand detachment triggered by temperature in tens of seconds. This hydrogel presents great mechanical performance (compressive strain of 65 %, 1.38 MPa) owing to the presence of supramolecular interactions in the hydrogel. Additionally, this hydrogel exhibits excellent antibacterial activity and biocompatibility. The synergistic effect of modified gelatin and ionic liquid greatly facilitates wound healing of full-thickness skin with high wound healing efficiency (98.45 %). Therefore, thanks to all these advantages, the Janus supramolecular hydrogel can be applied for wound management and treatment, which has huge potential in healing skin wounds.

Fabrication of a three-dimensional printed gelatin/sodium alginate/nano-attapulgite composite polymer scaffold loaded with leonurine hydrochloride and its effects on osteogenesis and vascularization

Bone tissue engineering scaffolds have made significant progress in treating bone defects in recent decades. However, the lack of a vascular network within the scaffold limits bone formation after implantation in vivo. Recent research suggests that leonurine hydrochloride (LH) can promote healing in full-thickness cutaneous wounds by increasing vessel formation and collagen deposition. Gelatin and Sodium Alginate are both polymers. ATP is a magnesium silicate chain mineral. In this study, a Gelatin/Sodium Alginate/Nano-Attapulgite composite hydrogel was used as the base material first, and the Gelatin/Sodium Alginate/Nano-Attapulgite composite polymer scaffold loaded with LH was then created using 3D printing technology. Finally, LH was grafted onto the base material by an amide reaction to construct a scaffold loaded with LH to achieve long-term LH release. When compared to pure polymer scaffolds, in vitro results showed that LH-loaded scaffolds promoted the differentiation of BMSCs into osteoblasts, as evidenced by increased expression of osteogenic key genes. The results of in vivo tissue staining revealed that the drug-loaded scaffold promoted both angiogenesis and bone formation. Collectively, these findings suggest that LH-loaded Gelatin/Sodium Alginate/Nano-Attapulgite composite hydrogel scaffolds are a potential therapeutic strategy and can assist bone regeneration.

Highly Stretchable, Transparent, and Adhesive Double-Network Hydrogel Dressings Tailored with Fish Gelatin and Glycyrrhizic Acid for Wound Healing

It remains challenging to fabricate highly stretchable and adhesive hydrogel dressings for wound healing using simple, safe, and green methods. Herein, inspired by the main components of snail mucus, a fully physical double-network (DN) hydrogel dressing composed of fish gelatin (FGel) and glycyrrhizic acid (GL) was fabricated, in which FGel provided a protein scaffold to mimic snail mucus proteins, while GL mimicked the adhesion and bioactivity of snail mucus because of its abundant carboxyl and hydroxyl groups and intrinsic immunomodulatory activity. As expected, the obtained FGel/GL hydrogel dressings exhibited outstanding mechanical and adhesive performances (flexibility, stretchability, adhesive ability, and removability), high transparency, and good antifreezing properties. More importantly, they also possessed excellent biocompatibility, cell migration, and angiogenesis ability in vitro experiments. Finally, animal experiments in vivo indicated that the FGel/GL hydrogel dressings significantly promoted full-thickness wound healing, including promoting granulation tissue formation, collagen deposition, and skin angiogenesis and inhibiting the inflammatory response. All these findings indicated that the FGel/GL hydrogel dressings have great potential for applications in the clinical treatment of wound healing.

Photocuring and Gelatin-Based Antibacterial Hydrogel for Skin Care

The development of moisturizing, antibacterial, and biocompatible multifunctional hydrogels is essential to protect skin and promote skin defects recovery. Gelatin has admired potential to be applied for skin care as a hydrogel in virtue of its hydrophilic biocompatible and biodegradable properties. In this study, triclosan-grafted gelatin and photo-cross-linkable methacrylated gelatin were synthesized and then combined to construct the semi-interpenetrating network and antibacterial hydrogels with the aid of a visible blue light. The antimicrobial test demonstrated that the resulting hydrogel obtained excellent inactivation capacity against E. coli, S. aureus, T. rubrum, and C. albicans with sterilizing rates of 99.998%, 99.998%, 99.19%, and 99.64%, respectively. In addition, the cytotoxicity, hemolysis, skin irritation, and rat skin wound healing experiments proved the good biocompatibility of the hydrogel. Therefore, this investigation sheds light on the development of multifunctional hydrogels in skin care.

A biphasic calcium phosphate/acylated methacrylate gelatin composite hydrogel promotes osteogenesis and bone repair

PURPOSE/AIM

Bone defects caused by trauma, tumors, congenital malformation, or inflammation are very common in orthopedics. In recent years, mimicking the composition and structure of natural bone tissue has become a hot topic in biomaterial research, with the aim of developing an ideal biomaterial for bone defect transplantation. Here, the feasibility of a biphasic calcium phosphate (BCP)/acylated methacrylate gelatin (GelMA) composite hydrogel to repair bone defects was evaluated in vitro and in rats.

MATERIALS AND METHODS

The biocompatibility of a biphasic calcium phosphate (BCP)/acylated methacrylate gelatin (GelMA) composite hydrogel was evaluated by cytoskeleton staining, live/dead cell staining and cell proliferation assays. The in vitro osteogenic activities of the composite hydrogel were evaluated by alkaline phosphatase and alizarin red staining, as well as osteogenic gene expression analysis at both transcript and protein levels. The in vivo bone repair activities were evaluated using the rat skull defect model.

RESULTS

The BCP/GelMA composite hydrogel displayed excellent biocompatibility and promoted osteogenesis of bone marrow mesenchymal stem cells in vitro. In addition, the BCP/GelMA composite hydrogel markedly promoted new bone formation in the rat skull-defect model.

CONCLUSIONS

BCP/GelMA composite hydrogel may be an effective artificial material for bone tissue engineering.

A 3D Bioprinted Nanoengineered Hydrogel with Photoactivated Drug Delivery for Tumor Apoptosis and Simultaneous Bone Regeneration via Macrophage Immunomodulation

One of the significant challenges in bone tissue engineering (BTE) is the healing of traumatic tissue defects owing to the recruitment of local infection and delayed angiogenesis. Herein, a 3D printable multi-functional hydrogel composing polyphenolic carbon quantum dots (CQDs, 100 µg mL-1 ) and gelatin methacryloyl (GelMA, 12 wt%) is reported for robust angiogenesis, bone regeneration and anti-tumor therapy. The CQDs are synthesized from a plant-inspired bioactive molecule, 1, 3, 5-trihydroxybenzene. The 3D printed GelMA-CQDs hydrogels display typical shear-thinning behavior with excellent printability. The fabricated hydrogel displayed M2 polarization of macrophage (Raw 264.7) cells via enhancing anti-inflammatory genes (e.g., IL-4 and IL10), and induced angiogenesis and osteogenesis of human bone mesenchymal stem cells (hBMSCs). The bioprinted hBMSCs are able to produce vessel-like structures after 14 d of incubation. Furthermore, the 3D printed hydrogel scaffolds also show remarkable near infra-red (NIR) responsive properties under 808 nm NIR light (1.0 W cm-2 ) irradiation with controlled release of antitumor drugs (≈49%) at pH 6.5, and thereby killing the osteosarcoma cells. Therefore, it is anticipated that the tissue regeneration and healing ability with therapeutic potential of the GelMA-CQDs scaffolds may provide a promising alternative for traumatic tissue regeneration via augmenting angiogenesis and accelerated immunomodulation.

Bioprinted PDLSCs with high-concentration GelMA hydrogels exhibit enhanced osteogenic differentiation in vitro and promote bone regeneration in vivo

OBJECTIVES

We aimed to explore the osteogenic potential of periodontal ligament stem cells (PDLSCs) in bioprinted methacrylate gelatine (GelMA) hydrogels in vitro and in vivo.

MATERIALS AND METHODS

PDLSCs in GelMA hydrogels at various concentrations (3%, 5%, and 10%) were bioprinted. The mechanical properties (stiffness, nanostructure, swelling, and degradation properties) of bioprinted constructs and the biological properties (cell viability, proliferation, spreading, osteogenic differentiation, and cell survival in vivo) of PDLSCs in bioprinted constructs were evaluated. Then, the effect of bioprinted constructs on bone regeneration was investigated using a mouse cranial defect model.

RESULTS

Ten percent GelMA printed constructs had a higher compression modulus, smaller porosity, lower swelling rate, and lower degradation rate than 3% GelMA. PDLSCs in bioprinted 10% GelMA bioprinted constructs showed lower cell viability, less cell spreading, upregulated osteogenic differentiation in vitro, and lower cell survival in vivo. Moreover, upregulated expression of ephrinB2 and EphB4 protein and their phosphorylated forms were found in PDLSCs in 10% GelMA bioprinted constructs, and inhibition of eprhinB2/EphB4 signalling reversed the enhanced osteogenic differentiation of PDLSCs in 10% GelMA. The in vivo experiment showed that 10% GelMA bioprinted constructs with PDLSCs contributed to more new bone formation than 10% GelMA constructs without PDLSCs and constructs with lower GelMA concentrations.

CONCLUSIONS

Bioprinted PDLSCs with high-concentrated GelMA hydrogels exhibited enhanced osteogenic differentiation partially through upregulated ephrinB2/EphB4 signalling in vitro and promoted bone regeneration in vivo, which might be more appropriate for future bone regeneration applications.

CLINICAL RELEVANCE

Bone defects are a common clinical oral problem. Our results provide a promising strategy for bone regeneration through bioprinting PDLSCs in GelMA hydrogels.

Formulation and Characterization of a Novel Oxidized Alginate-Gelatin-Silk Fibroin Bioink with the Aim of Skin Regeneration

Background

In the present study, a novel bioink was suggested based on the oxidized alginate (OAlg), gelatin (GL), and silk fibroin (SF) hydrogels.

Methods

The composition of the bioink was optimized by the rheological and printability measurements, and the extrusion-based 3D bioprinting process was performed by applying the optimum OAlg-based bioink.

Results

The results demonstrated that the viscosity of bioink was continuously decreased by increasing the SF/GL ratio, and the bioink displayed a maximum achievable printability (92 ± 2%) at 2% (w/v) of SF and 4% (w/v) of GL. Moreover, the cellular behavior of the scaffolds investigated by MTT assay and live/dead staining confirmed the biocompatibility of the prepared bioink.

Conclusion

The bioprinted OAlg-GL-SF scaffold could have the potential for using in skin tissue engineering applications, which needs further exploration.