Laser-induced plasma imaging for low-pressure detection

A novel technique based on laser induced plasma imaging is proposed to measure residual pressure in sealed containers with transparent walls, e.g. high voltage vacuum interrupter in this paper. The images of plasma plumes induced on a copper target at pressure of ambient air between 10^-2Pa and 10⁵Pa were acquired at delay times of 200ns, 400ns, 600ns and 800ns. All the plasma images at specific pressures and delay times showed a good repeatability. It was found that ambient gas pressure significantly affects plasma shape, plasma integral intensities and expansion dynamics. A subsection characteristic method was proposed to extract pressure values from plasma images. The method employed three metrics for identification of high, intermediate and low pressures: the distance between the target and plume center, the integral intensity of the plume, and the lateral size of the plume, correspondingly. The accuracy of the method was estimated to be within 15% of nominal values in the entire pressure range between 10^-2Pa and 10⁵Pa. The pressure values can be easily extracted from plasma images in the whole pressure range, thus making laser induced plasma imaging a promising technique for gauge-free pressure detection.

Comparative Study for the Association of Mitochondrial Haplogroup F+ and Metabolic Syndrome between Longevity and Control Population in Guangxi Zhuang Autonomous Region, China

BACKGROUND

Our previous study suggested that mitochondrial haplogroup F (mtDNA F) was a longevity-associated biomarker, but the effect of mitochondrial haplogroup F on longevity individuals with metabolic syndrome (MetS) was not clear. Thus we explored the association between mtDNA F and MetS among longevity and control population in Guangxi Zhuang Autonomous Region, China.

METHOD

A total of 793 individuals consisting of 307 long-lived participants and 486 local healthy controls were involved in this study. Genotypes of mtDNA F were amplified by polymerase chain reaction and Sanger sequenced. MetS was defined according to the revised National Cholesterol Education Program's Adult Treatment Panel III (NCEP ATPIII ) criteria.

RESULTS

The prevalence of MetS in longevity group (28.0%) was higher than that (18.5%) in control group (P=0.002). Through the case-control stratify analysis, the prevalence of MetS in mtDNA F+ longevity individuals (29.8%) was 4.6 fold higher than that (5.3%) in local control group (P<0.001). However, after further longevity-only analysis, no association between MetS and mtDNA F+ in longevity group was observed (P=0.167). Following same analysis of two variables in control group, we found that the prevalence of MetS in mtDNA F- (95.8%) was higher than that in mtDNA F+ (5.3%); conversely, the prevalence of non-metabolic syndrome (NMetS) in mtDNA F+ (94.7%) was markedly higher than that in mtDNA F- (4.2%) (P<0.001).

CONCLUSION

We demonstrated that mtDNA F+ , as a molecuar biomarker, might not only confer beneficial effect to resistance against MetS but also function as a positive factor for long-life span among the population in Guangxi Zhuang Autonomous Region, China.

The effect of aspirin on circulating tumor cells in metastatic colorectal and breast cancer patients: a phase II trial study

PURPOSE

Aspirin could reduce the risk of cancer metastasis. Circulating tumor cells (CTCs) are a key factor of cancer metastasis, but no evidence has revealed how aspirin affects CTCs and its epithelial-mesenchymal transition (EMT). Here, we conducted a clinical trial to investigate how aspirin affects CTCs in metastatic colorectal cancer (MCC) and breast cancer patients (MBC).

METHODS

The trial is retrospective registered at clinicaltrials.gov (NCT02602938). The eligible patients are given 100 mg aspirin q.d. for 8 weeks, and CTCs are evaluated at baseline, 4 and 8 weeks for absolute number, phenotype (epithelial type, E+, mesenchymal type, M+, and biophenotypic type, B+), and vimentin expression.

RESULTS

Data on 21 MCC and 19 MBC patients are analyzed, and it revealed that the CTC numbers decreased with aspirin treatment in MCC (p < 0.001) but not MBC (p = 0.0532); besides, ratio of E+ CTCs increased (p = 0.037) and M+ CTCs decreased at 2 months in MCC (p = 0.013), but neither the ratio of E+ or M+ CTCs changes significantly in MBC; vimentin expression of M+ CTCs is higher than E+ and B+ CTCs either in MBC or MCC patients at baseline (p < 0.01); and aspirin suppresses the vimentin expression in M+ (p = 0.002)and B+ (p = 0.006) CTCs of MCC and M+ CTCs of MBC (p = 0.004); besides it find vimentin expression in B+ (p = 0.004) or M+ (p < 0.001), CTCs are markedly decreased in patients with total CTC numbers declined.

CONCLUSION

Aspirin could decrease CTCs numbers and block EMT transition in MCC patients and part of MBC patients.

[Efficacy of 3D print guide technique in one stage posterior approach for the treatment of cervical and thoracic tuberculosis with kyphosis]

Objective: To investigate the application of 3D printing technology in the treatment of patients with cervical kyphosis and paraplegia in different segments of the cervical spine after one-stage debridement, bone graft fusion and pedicle screw fixation. Methods: From January 2008 to January 2017, a total of 31 patients with thoracolumbar tuberculosis were treated in the Department of Orthopaedics, the Xinjiang Uygur Autonomous Region people's Hospital.Lesions of the thoracic spine (T1-T4) in 8 cases, (C5-C7) in 10 cases, cervical and thoracic segment in 13 cases, involving a total of 2 cases of vertebral body in 7 cases, 3 cases of vertebral body in 14 cases, 4 cases of vertebral body. 3D printing group (group A) 12 cases, non 3D printing group (group B) of 19 cases.All cases were treated with a posterior approach to the treatment of the cervical spinal cord around the spinal cord.After taking regular anti tuberculosis drugs in 6-12 months, follow-up observation of correction of kyphosis and paraplegia recovery, blood sedimentation rate (ESR), C-reactive protein (CRP) changes. Results: All cases were followed up for at least 6 months. Twelve patients were treated with 3D printing technique before operation, and the operation was performed according to the preoperative plan.The diameter and length of pedicle screws, the direction of insertion, and the distance between the insertion point and the posterior midline of the pedicle screw were similar to those in the 3D.Three days after the operation, the effect of fracture reduction was satisfactory, and the position of pedicle screws was good.After 6 months of follow-up, the X-ray showed that the pedicle screws were in good position, and there was no loosening and fracture.All the patients were healed, and there was no segmental instability.3D printing group during surgery bleeding, operation time, postoperative drainage volume, compared with the non 3D print group of surgical results, 3D printing group significantly reduce the surgical trauma[(131±18) min vs (162±23), P<0.01; (528±34) ml vs (615±41) ml, P<0.01; (257±46) vs (327±56), P<0.01; (not grouping, before after operation), (64±42) mm/1 h vs (6±7) mm/1 h, P<0.01; CRP (not packet): (72±41) μg/L, (13±6) mm/1 h, P<0.01]. There was significant difference between two groups.The JOA scores of patients in the 3D group were better than those in the non 3D group after the operation in 1, 2 week and in 1, 3, and month.There was no significant difference between the two groups after the operation.Two groups of patients before and after correction of Cobb angle were satisfied, and no significant difference between the two groups.Cobb lost an average of 1 degrees angle correction.The spinal tuberculosis in this group were cured without serious complications. Conclusions: According to the cervical and thoracic tuberculous kyphosis and paraplegia severity, choose a posterior surgery can achieve effective cure, feasible thorough debridement with fixed spinal stability before and after the party obtained bone fusion and deformity correction in 3D technology to increase the accuracy and safety of operation, and can be provide more detailed preoperative, intuitive, three-dimensional, realistic personalized operation scheme.It can reduce the operation trauma, and achieve rapid recovery after operation.

Effect of zoledronic acid therapy on postmenopausal osteoporosis between the Uighur and Han population in Xinjiang: An open-label, long-term safety and efficacy study

WHAT IS KNOWN AND OBJECTIVE

Postmenopausal osteoporosis is becoming an urgent health problem in China. A once-yearly infusion of zoledronic acid can be very effective for the treatment of postmenopausal osteoporosis in significantly reducing the risk of hip, vertebral and other fractures. This study aimed to investigate zoledronic acid treatment on postmenopausal osteoporosis in Uighur and Han patients in Xinjiang province, China.

METHODS

A self-controlled and prospective trial design was adopted. A total of 155 Uighur and 151 Han patients were enrolled. All subjects received an intravenous infusion of zoledronic acid (5 mg) at day 0 (baseline) and at 12 months. Patients were followed up for 24 months; the bone mineral density (BMD) of the left total hip and L1-L4 vertebrae was measured at day 0 and at 24 months.

RESULTS AND DISCUSSION

BMD was significantly higher after zoledronic acid treatment compared with baseline levels in all patients, as assessed at 24 months. Moreover, the BMD of left total hip increased with 2.7% in the Han group was significantly higher than that of the Uighur group with 1.4% (left total hip, 95% CI: 2.6% to 2.8% in Han group vs 1.2% to 1.4% in Uighur group). The BMD of L1-L4 vertebrae increased with 2.2% in the Han group was significantly higher than that of the Uighur group with 1.6% (L1-L4 vertebrae, 95% CI, 2.0% to 2.4% in Han group vs 1.4% to 1.7% in Uighur group); P < .001. There was no significant difference in drug-related adverse effects between the two groups (P > .05).

WHAT IS NEW AND CONCLUSION

Zoledronic acid appears to be more effective in postmenopausal osteoporosis in Han than in Uighur subjects. The reasons for this require further investigation.

Highly controllable direct femtosecond laser writing of gold nanostructures on titanium dioxide surfaces

A highly reproducible and controllable deposition procedure for gold nanostructures on a titanium dioxide (TiO₂) surface using femtosecond laser light has been demonstrated. This is realized by precisely focusing onto the TiO₂ surface in the presence of a pure gold ion solution. The deposition is demonstrated both in dot arrays and line structures. Thanks to the multi-photon excitation, we observe that the deposition area of the nanostructures can be confined to a degree far greater than the diffraction limited focal spot. Finally, we demonstrate that catalytic activity with visible light irradiation is enhanced, proving the applicability of our new deposition technique to the catalytic field.

The Mechanism by Which Dodecyl Dimethyl Benzyl Ammonium Chloride Increased the Toxicity of Chlorpyrifos to Spodoptera exigua

Beet armyworm, Spodoptera exigua (Hübner) is one of the most destructive pests that causes significant losses in crops. Unfortunately, S. exigua have developed resistance toward the majority of insecticides. Synergists may provide an important choice to deal with the resistance problems. Dodecyl dimethyl benzyl ammonium chloride (DDBAC) is a cationic surfactant, which displayed enhancement effect when combined with chlorpyrifos against S. exigua, giving enhancement factors of 1.50 and 1.57 at the concentrations of 90 and 810 mg L^-1. In order to clarify the possible mechanisms, we investigate the effects of DDBAC on detoxification enzymes. However, DDBAC showed no inhibition on these enzymes activities. Meanwhile, scanning electron microscope images indicated DDBAC did not affect the cuticle super micro structure of S. exigua. The alterations in cuticular penetration rate have also been observed; indeed, it has been suggested that synergism is obtained by an acceleration of insecticide penetration through the cuticle. The chlorpyrifos penetration increased sharply when combined with 90 and 810 mg L^-1 DDBAC, with only 12.6 and 8.5% of the initial chlorpyrifos recovered by external rinsing after 8 h. In contrast, when there was no DDBAC, more than 23.3% of the initial dose was recovered after 8 h.

Synthesis, fungicidal evaluation and 3D-QSAR studies of novel 1,3,4-thiadiazole xylofuranose derivatives

1,3,4-Thiadiazole and sugar-derived molecules have proven to be promising agrochemicals with growth promoting, insecticidal and fungicidal activities. In the research field of agricultural fungicide, applying union of active group we synthesized a new set of 1,3,4-thiadiazole xylofuranose derivatives and all of the compounds were characterized by ¹H NMR and HRMS. In precise toxicity measurement, some of compounds exhibited more potent fungicidal activities than the most widely used commercial fungicide Chlorothalonil, promoting further research and development. Based on our experimental data, 3D-QSAR (three-dimensional quantitative structure-activity relationship) was established and investigated using comparative molecular field analysis (CoMFA) and comparative molecular similarity indices analysis (CoMSIA) techniques, helping to better understand the structural requirements of lead compounds with high fungicidal activity and environmental compatibility.

Crystal structure of the multiple antibiotic resistance regulator MarR from Clostridium difficile

Regulators of multiple antibiotic resistance (MarRs) are key players against toxins in prokaryotes. MarR homologues have been identified in many bacterial and archaeal species which pose daunting antibiotic resistance issues that threaten public health. The continuous prevalence of Clostridium difficile infection (CDI) throughout the world is associated with the abuse of antibiotics, and antibiotic treatments of CDI have limited effect. In the genome of C. difficile strain 630, the marR gene (ID 4913953) encodes a MarR protein. Here, MarR from C. difficile (MarRC.difficile) was subcloned and crystallized for the first time. MarRC.difficile was successfully expressed in Escherichia coli in a soluble form and was purified to near-homogeneity (>95%) by a two-step purification protocol. The structure of MarRC.difficile has been solved at 2.3 Å resolution. The crystal belonged to the monoclinic space group P43212, with unit-cell parameters a = b = 66.569, c = 83.654 Å. The structure reported reveals MarRC.difficile to be a dimer, with each subunit consisting of six α-helices and three antiparallel β-hairpins. MarRC.difficile shows high structural similarity to the MarR proteins from E. coli and Staphylococcus aureus, indicating that MarRC.difficile might be a DNA-binding protein.

MicroRNA-455 suppresses the oncogenic function of HDAC2 in human colorectal cancer

Colorectal cancer (CRC) is the fourth leading cause of cancer-induced mortality. Histone deacetylase 2 (HDAC2) is involved in prognosis and therapy of CRC. This study aimed to explore novel therapeutic targets for CRC. The alteration of HDAC2 expression in CRC tissues was estimated by qRT-PCR. After lentivirus transfection, HDAC2 knockdown was confirmed by western blot analysis. The effect of HDAC2 knockdown on cell proliferation was then assessed by 3-(4,5-dimethylthiazol-2-yl)-2, 5-diphenyltetrazolium bromide (MTT) assay. Screened by TargetScan, microRNA (miR)-455 was predicted to bind to 3′UTR of HDAC2 and the prediction was verified by luciferase assay. Finally, cells were transfected, respectively, with miR-455 mimics or miR-455 negative control (miR-NC) and the expression of HDAC2, cell proliferation and apoptosis of transfected cells were respectively evaluated by western blot analysis, MTT assay and flow cytometry. Results showed that the HDAC2 expression was up-regulated in CRC tissues (P<0.05). HDAC2 knockdown significantly decreased cell viability at day 3 (P<0.05), day 4 (P<0.01), and day 5 (P<0.001) after infection. Then, miR-455 was verified to directly target HDAC2, resulting in a significant difference in luciferase activity (P<0.01). Moreover, miR-455 decreased the expression of HDAC2 (P<0.01). miR-455 remarkably decreased cell viability at day 3 (P<0.05), day 4 (P<0.01), and day 5 (P<0.001) after transfection while inducing cell apoptosis (P<0.001). In conclusion, miR-455 inhibited cell proliferation while inducing cell apoptosis by targeting HDAC2 in CRC cells.

Analysis of genetic diversity of Leuciscus leuciscus baicalensis using novel microsatellite markers with cross-species transferability

We used next-generation sequencing technology to characterize 19 genomic simple sequence repeat (SSR) markers and 11 expressed sequence tag (EST) SSR markers from Leuciscus leuciscus baicalensis, a small freshwater fish that is widely distributed in Xinjiang, China. Primers were used to test for polymorphisms in three L. leuciscus baicalensis populations in Xinjiang. There were 4-27 (average 11.3) alleles (N_A), the expected heterozygosity (H_E) was 0.36-0.94 (average 0.75 ± 0.14), the observed heterozygosity (H_O) was 0.37-1.00 (average 0.68 ± 0.18), and the polymorphism information content (PIC) was 0.31-0.93 (average 0.71). The averages of H_E and PIC for the EST-SSR markers were slightly lower than for the genomic SSR markers. Genetic analysis of the three populations showed similar results for PIC, H_E, and N_A. Amplifications were performed in nine other species; the top three transferability values were for Rutilus lacustris (80%), Leuciscus idus (76.7%), and Phoxinus ujmonensis (63.3%), with the following average values: PIC (0.56, 4.46, and 0.52); N_A (0.40, 3.00, and 0.32); and H_O (0.44, 2.74, and 0.22), respectively. L. leuciscus baicalensis is one of the most important commercial fish in Xinjiang, but in recent years, fishery resources have decreased sharply owing to water conservation projects, unreasonable utilization, and invasion by alien species. These novel SSR markers are appropriate for studies involving fingerprinting, gene flow, genetic diversity, population structure, and molecular-assisted breeding, and could contribute to the conservation of L. leuciscus baicalensis.

Surface-enrichment with hydroxyapatite nanoparticles in stereolithography-fabricated composite polymer scaffolds promotes bone repair

Fabrication of composite scaffolds using stereolithography (SLA) for bone tissue engineering has shown great promises. However, in order to trigger effective bone formation and implant integration, exogenous growth factors are commonly combined to scaffold materials. In this study, we fabricated biodegradable composite scaffolds using SLA and endowed them with osteopromotive properties in the absence of biologics. First we prepared photo-crosslinkable poly(trimethylene carbonate) (PTMC) resins containing 20 and 40wt% of hydroxyapatite (HA) nanoparticles and fabricated scaffolds with controlled macro-architecture. Then, we conducted experiments to investigate how the incorporation of HA in photo-crosslinked PTMC matrices improved human bone marrow stem cells osteogenic differentiation in vitro and kinetic of bone healing in vivo. We observed that bone regeneration was significantly improved using composite scaffolds containing as low as 20wt% of HA, along with difference in terms of osteogenesis and degree of implant osseointegration. Further investigations revealed that SLA process was responsible for the formation of a rich microscale layer of HA corralling scaffolds. To summarize, this work is of substantial importance as it shows how the fabrication of hierarchical biomaterials via surface-enrichment of functional HA nanoparticles in composite polymer stereolithographic structures could impact in vitro and in vivo osteogenesis.

STATEMENT OF SIGNIFICANCE

This study reports for the first time the enhance osteopromotion of composite biomaterials, with controlled macro-architecture and microscale distribution of hydroxyapatite particles, manufactured by stereolithography. In this process, the hydroxyapatite particles are not only embedded into an erodible polymer matrix, as reported so far in the literature, but concentrated at the surface of the structures. This leads to robust in vivo bone formation at low concentration of hydroxyapatite. The reported 3D self-corralling composite architecture provides significant opportunities to develop functional biomaterials for bone repair and tissue engineering.

Local induction of inflammation affects bone formation

To explore the influence of inflammatory processes on bone formation, we applied a new in vivo screening model. Confined biological pockets were first created in rabbits as a response to implanted bone cement discs. These biomembrane pockets were subsequently used to study the effects of inflammatory stimuli on ectopic bone formation within biphasic calcium phosphate (BCP) constructs loaded with TNF-α, lipopolysaccharide (LPS) or lipoteichoic acid (LTA), all with or without bone morphogenetic protein (BMP)-2. Analysis of bone formation after 12 weeks demonstrated that the inflammatory mediators were not bone-inductive in combination with the BCP alone, but inhibited or enhanced BMP-induced bone formation. LPS was associated with a strong inhibition of bone formation by BMP-2, while LTA and TNF-α showed a positive interaction with BMP-2. Since the biomembrane pockets did not interfere with bone formation and prevented the leakage of pro-inflammatory compounds to the surrounding tissue, the biomembrane model can be used for in vivo approaches to study local inflammation in conjunction with new bone formation. Using this model, it was shown that the modulation of the inflammatory response could be beneficial or detrimental to the subsequent bone formation process. The co-delivery of inflammatory factors and bone-related growth factors should be further explored as a strategy to enhance the bone-forming efficacy of bone substitutes.

Cell aggregation enhances bone formation by human mesenchymal stromal cells

The amount of bone generated using current tissue engineering approaches is insufficient for many clinical applications. Previous in vitro studies suggest that culturing cells as 3D aggregates can enhance their osteogenic potential, but the effect on bone formation in vivo is unknown. Here, we use agarose wells to generate uniformly sized mesenchymal stromal cell (MSC) aggregates. When combined with calcium phosphate ceramic particles and a gel prepared from human platelet-rich plasma, we generated a tissue engineered construct which significantly improved in vivo bone forming capacity as compared to the conventional system of using single cells seeded directly on the ceramic surface. Histology demonstrated the reproducibility of this system, which was tested using cells from four different donors. In vitro studies established that MSC aggregation results in an up-regulation of osteogenic transcripts. And finally, the in vivo performance of the constructs was significantly diminished when unaggregated cells were used, indicating that cell aggregation is a potent trigger of in vivo bone formation by MSCs. Cell aggregation could thus be used to improve bone tissue engineering strategies.

De novo transcriptome and expression profile analyses of the Asian corn borer (Ostrinia furnacalis) reveals relevant flubendiamide response genes

Background

The Asian corn borer (ACB), Ostrinia furnacalis (Guenée), has become the most damaging insect pest of corn in Asia. However, the lack of genome or transcriptome information heavily hinders our further understanding of ACB in every aspect at a molecular level and on a genome-wide scale. Here, we used the Ion Torrent Personal Genome Machine (PGM) Sequencer to explore the ACB transcriptome and to identify relevant genes in response to flubendiamide, showing high selective activity against ACB.

Results

We obtained 35,430 unigenes, with an average length of 716 bp, representing a dramatic expansion of existing cDNA sequences available for ACB. These sequences were annotated with Non-redundant Protein (Nr), Gene Ontology (GO), Clusters of Orthologous Groups (COG) and Kyoto Encyclopedia of Genes and Genomes (KEGG) to better understand their functions. A total of 31 cytochrome P450 monooxygenases (P450s), 27 carboxyl/cholinesterases (CCEs) and 19 glutathione S-transferases (GSTs) were manually curated to construct phylogenetic trees, and 25 unigenes encoding target proteins (acetylcholinesterase, nicotinic acetylcholine receptor, gamma-aminobutyric acid receptor, glutamate-gated chloride channel, voltage-gated sodium channel and ryanodine receptor) were identified. In addition, we compared and validated the differentially expressed unigenes upon flubendiamide treatment, revealing that the genes for detoxification enzymes (P450s and esterase), calcium signaling pathways and muscle control pathways (twitchin and tropomyosin), immunoglobulin (hemolin), chemosensory protein and heat shock protein 70 were significantly overexpressed in response to flubendiamide, while the genes for cuticular protein, protease and oxidoreductase showed much lower expression levels.

Conclusion

The obtained transcriptome information provides large genomic resources available for further studies of ACB. The differentially expressed gene data will elucidate the molecular mechanisms of ACB in response to the novel diamide insecticide, flubendiamide. In particular, these findings will facilitate the identification of the genes involved in insecticide resistance and the development of new compounds to control the ACB.

Electronic supplementary material

The online version of this article (doi:10.1186/s12864-016-3431-6) contains supplementary material, which is available to authorized users.

Suppressing stathmin-l can inhibit chkl protein expression and reduce the invasion and tumorigenicity of cervical cancer cells

The purpose of this study was to evaluate the effects of stathmin-l on chkl protein expression in cervical cancer cells and the influ- ences on the cells' invasion and tumorigenicity. Suppressed stathmin-l expression in Hela cells and C33A cells by lentiviral vector were utilized. Real time PCR and Western blot were used to examine the expression of chkl. Cell proliferation and invasion were stud- ied using MTT assays and transwell migration assays.The differences of tumorigenicity in vivo were explored using xenograft experi- ments. In addition, stathmin-l expressions in 24 cervical cancer patients were studied without regional lymph nodes metastasis and 16 metastatic patients by immunohistochemistry assays and real time PCR. This study found downregulating stathmin-l reduced chkl ex- pressions and the proliferation and invasion in cervical cancer cells and reduced the tumorigenicity of tumor cells.

[The prenatal genetic diagnosis of a family with complete androgen insensitivity syndrome]

Objective: To identify the Androgen Receptor (AR) gene mutation of one family with complete androgen insensitivity syndrome (CAIS) and to establish the methods of prenatal genetic diagnosis for CAIS. Methods: The AR gene exons of the family were amplified by PCR and sequenced directly. Linkage analysis was performed by using the CAG repeats in the exon1 of AR gene to assure accuracy of the prenatal diagnosis. Results: We found a frameshift mutation c. 2546del A (p. Asn849Ile fsX34) in the exon7 of AR gene in the proband.The mutation had not been reported before.The mother of the proband went through two times prenatal genetic diagnosis for her next pregnancies, both fetuses were male and did not get the mutation.The results of the linkage analysis were consistent with the sequencing results. Conclusion: A novel AR mutations in a CAIS family have been confirmed. The method of prenatal genetic diagnosis was established, and worked effectively in the CAIS family.

The role of gibberellins in improving the resistance of tebuconazole-coated maize seeds to chilling stress by microencapsulation

Chilling stress during germination often causes severe injury. In the present study, maize seed germination and shoot growth under chilling stress were negatively correlated with the dose of tebuconazole in an exponential manner as predicted by the model Y = A + B × e^(−x/k). Microencapsulation was an effective means of eliminating potential phytotoxic risk. The gibberellins (GAs) contents were higher after microencapsulation treatment than after conventional treatment when the dose of tebuconazole was higher than 0.12 g AI (active ingredient) kg⁻¹ seed. Further analysis indicated that microencapsulation can stimulate ent-kaurene oxidase (KO) activity to some extent, whereas GA 3-oxidase (GA3ox) and GA 2-oxidase (GA2ox) activities remained similar to those in the control. Genes encoding GA metabolic enzymes exhibited different expression patterns. Transcript levels of ZmKO1 increased in the microcapsule treatments compared to the control. Even when incorporated into microcapsules, tebuconazole led to the upregulation of ZmGA3ox1 at doses of less than 0.12 g AI kg⁻¹ seed and to the upregulation of ZmGA3ox2 when the dose was higher than 0.12 g AI kg⁻¹ seed. With increasing doses of microencapsulated tebuconazole, the transcript levels of ZmGA2ox4, ZmGA2ox5 and ZmGA2ox6 exhibited upward trends, whereas the transcript levels of ZmGA2ox7 exhibited a downward trend.