Highly uniform and vertically aligned SnO2 nanochannel arrays for photovoltaic applications

Nanostructured electrodes with vertical alignment have been considered ideal structures for electron transport and interfacial contact with redox electrolytes in photovoltaic devices. Here, we report large-scale vertically aligned SnO2 nanochannel arrays with uniform structures, without lateral cracks fabricated by a modified anodic oxidation process. In the modified process, ultrasonication is utilized to avoid formation of partial compact layers and lateral cracks in the SnO2 nanochannel arrays. Building on this breakthrough, we first demonstrate the photovoltaic application of these vertically aligned SnO2 nanochannel arrays. These vertically aligned arrays were directly and successfully applied in quasi-solid state dye-sensitized solar cells (DSSCs) as photoanodes, yielding reasonable conversion efficiency under back-side illumination. In addition, a significantly short process time (330 s) for achieving the optimal thickness (7.0 μm) and direct utilization of the anodized electrodes enable a simple, rapid and low-cost fabrication process. Furthermore, a TiO2 shell layer was coated on the SnO2 nanochannel arrays by the atomic layer deposition (ALD) process for enhancement of dye-loading and prolonging the electron lifetime in the DSSC. Owing to the presence of the ALD TiO2 layer, the short-circuit photocurrent density (Jsc) and conversion efficiency were increased by 20% and 19%, respectively, compared to those of the DSSC without the ALD TiO2 layer. This study provides valuable insight into the development of efficient SnO2-based photoanodes for photovoltaic application by a simple and rapid fabrication process.

Compact, hydrophilic, lanthanide-binding tags for paramagnetic NMR spectroscopy

The design, synthesis and evaluation of four novel lanthanide-binding tags for paramagnetic NMR spectroscopy are reported.

The design, synthesis and evaluation of four novel lanthanide-binding tags for paramagnetic NMR spectroscopy are reported. Each tag is based on the ((2S,2′S,2′′S,2′′′S)-1,1′,1′′,1′′′-(1,4,7,10-tetraazacyclododecane-1,4,7,10-tetrayl)tetrakis(propan-2-ol)) scaffold, featuring small chiral alcohol coordinating pendants to minimise the size and hydrophobic character of each tag. The tags feature different linkers of variable length for conjugation to protein via a single cysteine residue. Each tag's ability to induce pseudocontact shifts (PCS) was assessed on a ubiquitin A28C mutant. Two enantiomeric tags of particular note, C7 and C8, produced significantly larger Δχ-tensors compared to a previously developed tag, C1, attributed to the extremely short linker utilised, limiting the mobility of the bound lanthanide ion. The C7 and C8 tags' capacity to induce PCSs was further demonstrated on GB1 Q32C and 6-hydroxymethyl-7,8-dihydropterin pyrophosphokinase (HPPK) S112C/C80A mutants. Whilst factors such as the choice of lanthanide ion, pH and site of conjugation influence the size of the PCSs obtained, the tags represent a significant advance in the field.

Highly ordered and vertically oriented TiO2/Al2O3 nanotube electrodes for application in dye-sensitized solar cells

The surface of long TiO2 nanotube (NT) electrodes in dye-sensitized solar cells (DSSCs) was modified without post-annealing by using atomic layer deposition (ALD) for the enhancement of photovoltage. Vertically oriented TiO2 NT electrodes with highly ordered and crack-free surface structures over large areas were prepared by a two-step anodization method. The prepared TiO2 NTs had a pore size of 80 nm, and a length of 23 μm. Onto these TiO2 NTs, an Al2O3 shell of a precisely controlled thickness was deposited by ALD. The conformally coated shell layer was confirmed by high-resolution transmission electron microscopy, energy-dispersive x-ray spectroscopy, and x-ray photoelectron spectroscopy. The open-circuit voltage (V(oc)) of the DSSCs was gradually enhanced as the thickness of the Al2O3 shell of the TiO2/Al2O3 NT electrodes was increased, which resulted from the enhanced electron lifetime. The enhanced electron lifetime caused by the energy barrier effect of the shell layer was measured quantitatively by the open-circuit voltage decay technique. As a result, 1- and 2-cycle-coated samples showed enhanced conversion efficiencies compared to the bare sample.

HDL-C levels modify the association between C-reactive protein and coronary artery calcium score

BACKGROUNDS AND AIMS

C-reactive protein (CRP) levels predict incident and recurrent cardiovascular disease (CVD) events; however, associations between CRP and pre-clinical atherosclerosis is less certain. Since high concentrations of high-density lipoprotein cholesterol (HDL-C) are inversely associated with CVD risk, we investigated whether HDL-C modified the association between CRP concentration and measures of preclinical atherosclerosis.

METHODS AND RESULTS

Data were analyzed from a Korean occupational cohort of 12,030 male subjects who underwent a cardiac computed tomography (CT) estimation of coronary artery calcification (CAC) score and an assessment of CVD risk factors. Logistic regression was used to describe associations between CRP and measures of pre-clinical atherosclerosis, such as CAC scores >0. As many as 1351 (11.2%) participants had a CAC score>0. CRP was stratified into 3 groups based on clinical category: <1 mg/L, 1 to <2 mg/L, and ≥ 2 mg/dL. In the bottom CRP group, 907/8697 (10.4%) of subjects had a CAC score >0, compared with 242/1943 (12.5%) in the middle group and 202/1396 (14.5%) in the top CRP group (p < 0.0001). After adjustment for multiple CVD risk factors, there was a positive association between CRP and CAC score>0 (OR between top and bottom CRP groups, 1.41 [1.04, 1.90], p = 0.027) in the lowest HDL-C quartile but not in the highest HDL-C (OR between top and bottom CRP group, 0.80 [0.46, 1.39], p = 0.425).

CONCLUSION

The association between CRP concentration and CAC score differed according to HDL-C levels.

Experimental validation of the TOPAS Monte Carlo system for passive scattering proton therapy

PURPOSE

TOPAS (TOol for PArticle Simulation) is a particle simulation code recently developed with the specific aim of making Monte Carlo simulations user-friendly for research and clinical physicists in the particle therapy community. The authors present a thorough and extensive experimental validation of Monte Carlo simulations performed with TOPAS in a variety of setups relevant for proton therapy applications. The set of validation measurements performed in this work represents an overall end-to-end testing strategy recommended for all clinical centers planning to rely on TOPAS for quality assurance or patient dose calculation and, more generally, for all the institutions using passive-scattering proton therapy systems.

METHODS

The authors systematically compared TOPAS simulations with measurements that are performed routinely within the quality assurance (QA) program in our institution as well as experiments specifically designed for this validation study. First, the authors compared TOPAS simulations with measurements of depth-dose curves for spread-out Bragg peak (SOBP) fields. Second, absolute dosimetry simulations were benchmarked against measured machine output factors (OFs). Third, the authors simulated and measured 2D dose profiles and analyzed the differences in terms of field flatness and symmetry and usable field size. Fourth, the authors designed a simple experiment using a half-beam shifter to assess the effects of multiple Coulomb scattering, beam divergence, and inverse square attenuation on lateral and longitudinal dose profiles measured and simulated in a water phantom. Fifth, TOPAS' capabilities to simulate time dependent beam delivery was benchmarked against dose rate functions (i.e., dose per unit time vs time) measured at different depths inside an SOBP field. Sixth, simulations of the charge deposited by protons fully stopping in two different types of multilayer Faraday cups (MLFCs) were compared with measurements to benchmark the nuclear interaction models used in the simulations.

RESULTS

SOBPs' range and modulation width were reproduced, on average, with an accuracy of +1, -2 and ±3 mm, respectively. OF simulations reproduced measured data within ±3%. Simulated 2D dose-profiles show field flatness and average field radius within ±3% of measured profiles. The field symmetry resulted, on average in ±3% agreement with commissioned profiles. TOPAS accuracy in reproducing measured dose profiles downstream the half beam shifter is better than 2%. Dose rate function simulation reproduced the measurements within ∼2% showing that the four-dimensional modeling of the passively modulation system was implement correctly and millimeter accuracy can be achieved in reproducing measured data. For MLFCs simulations, 2% agreement was found between TOPAS and both sets of experimental measurements. The overall results show that TOPAS simulations are within the clinical accepted tolerances for all QA measurements performed at our institution.

CONCLUSIONS

Our Monte Carlo simulations reproduced accurately the experimental data acquired through all the measurements performed in this study. Thus, TOPAS can reliably be applied to quality assurance for proton therapy and also as an input for commissioning of commercial treatment planning systems. This work also provides the basis for routine clinical dose calculations in patients for all passive scattering proton therapy centers using TOPAS.

Harmful and beneficial relationships between alcohol consumption and subclinical atherosclerosis

BACKGROUND AND AIMS

Arterial stiffness and increased intima-media wall thickness are two of the main predictors of cardiovascular disease (CVD). We evaluated whether brachial-ankle pulse wave velocity (baPWV) and common carotid artery intima-media wall thickness (CCA-IMT) are correlated with alcohol consumption in a cross-sectional study among Korean men and women aged 40 years and over.

METHODS AND RESULTS

All 5539 subjects (2121 men and 3418 women) were participants in the Multi-Rural Communities cohort (MRcohort) study, a part of the Korean Genome Epidemiology Study (KoGES). The baPWV was positively correlated with alcohol consumption in men (p for trend <0.0001). Age (middle-aged versus elderly) modified the effect of alcohol consumption on PWV. On the other hand CCA-IMT decreased with alcohol consumption in men. There was no favorable zone of alcohol consumption in terms of baPWV and CCA-IMT. Adjustment for lipid profiles substantially attenuated the relationship between alcohol consumption and CCA-IMT. There was no clear relation between alcohol consumption and baPWV/CCA-IMT in women.

CONCLUSIONS

Along with a linear harmful relationship between alcohol consumption and arterial stiffness in men there may also be a beneficial relationship between alcohol consumption and carotid intima-wall thickness. The effect of alcohol on arterial stiffness may be slightly stronger in elderly men, and the effect of alcohol on CCA-IMT may be mediated by lipid factors.

A Case of Esophageal Fibrovascular Polyp That Induced Asphyxia during Sleep

Esophageal fibrovascular polyps are rare, benign, submucosal tumors of the upper digestive tract that usually have an indolent course until the lesion attains a very large size. The most frequent complaints associated with these tumors include dysphagia and foreign body sensation. However, a long pedunculated polyp can regurgitate into the pharynx or oral cavity and cause asphyxia and sudden death if the larynx is occluded. We describe the case of a 51-year-old man who experienced snoring and occasional asphyxia during sleep. Upper endoscopy was performed, which indicated the presence of a pedunculated esophageal polyp that regurgitated into the vocal cords. The polyp was removed using a polypectomy snare and was confirmed to be a fibrovascular polyp based on pathologic examination findings. Three months after the excision of the polyp, the patient was found to be doing well without any further occurrence of asphyxia or sleep disturbances.

Roles for primary cilia in gonadotrophin-releasing hormone neurones in the mouse

During embryonic development, gonadotrophin-releasing hormone (GnRH) neurones make an extraordinary migration out of the nose and into the brain where, in adulthood, they drive the pituitary regulation of gonadal function and fertility. Primary cilia are antennae-like, immotile organelles that project from the surface of nearly all cells, including GnRH neurones. Links between defects in primary cilia and a variety of human pathologies have been discovered that suggest a role for primary cilia in embryogenesis and reproductive function. The present study aimed to investigate whether GnRH neurone primary cilia are critical for their embryonic migration and the adult control of fertility. To achieve this, we used a Cre-loxP strategy to selectively disrupt primary cilia by deleting Kif3a, an intraflagellar transport protein family member essential for primary cilia assembly and function, specifically in GnRH neurones. Confocal analysis revealed that, in Kif3a(fl/fl) (WT-Kif3a) controls, all GnRH neurones possessed primary cilia, whereas, in GnRH-Cre(+/-) ;Kif3a(fl/fl) (GnRH-Kif3aKO) mice, 60% of GnRH neurones lacked any evidence of primary cilia and the remaining 40% possessed only stunted primary cilia (< 2 μm). Despite abolishing normal primary cilia assembly in GnRH neurones from embryogenesis, adult GnRH neurone distribution and reproductive function was remarkably normal. The total number of GnRH neurones was the same in GnRH-Kif3aKO and WT-Kif3a controls; however, a significant increase (25%) was identified in the number of GnRH neurones sampled through the midpoint of the rostral pre-optic area in GnRH-Kif3aKO mice (P < 0.05). The time to vaginal opening was not different in GnRH-Kif3aKO mice, although they displayed significantly advanced first oestrus (P < 0.05), and oestrous cycle length was increased (P < 0.05). However, females displayed normal basal levels of luteinising hormone, responded normally to oestrogen-induced negative- and positive-feedback, and displayed normal fecundity. Taken together, these data suggest that primary cilia and associated signal transduction pathways play a role in the topographical distribution and specific functions of GnRH neurones; however, they are not essential for fertility.

A cross-sectional analysis of the relationship between daily alcohol consumption and serum adiponectin levels among adults aged 40 years or more in a rural area of Korea

BACKGROUND/OBJECTIVES

Light-to-moderate alcohol consumption has been proposed to raise serum adiponectin levels, but this view is controversial. There is little information on the effect of heavy drinking. The aim of this study was to examine the relationship between alcohol consumption and serum adiponectin levels in healthy Koreans.

SUBJECTS/METHODS

The design of the study was cross-sectional, using data from the Korean Multi-Rural Communities Cohort Study (MRCohort), which is a part of the Korean Genome Epidemiology Study (KoGES). The subjects were 1542 individuals (635 men and 907 women) aged ≥ 40 years who were recruited in Yangpyeong-Gun, Kyunggi province, South Korea, in 2005 and 2006. Daily alcohol consumption was calculated from average frequency of alcohol consumption and the amount of alcohol consumed per occasion using a structured questionnaire and serum adiponectin levels were measured.

RESULTS

Although adiponectin levels appeared to be higher in those consuming moderate levels of alcohol than in nondrinkers, the difference was not statistically significant. Heavy drinking (≥ 90.0 g/day) was significantly related to reduced serum adiponectin levels (P=0.003), although the significance of the relationship was reduced after adjusting for potential confounders (P=0.061) such as age, waist/hip ratio, blood pressure, fasting blood glucose, current smoker, higher education, protein intake, vitamin C intake and vitamin E intake in men. The relation seemed to be stronger in individuals consuming alcohol in the form of takju (Korean rice wine; P=0.022).

CONCLUSIONS

Heavy alcohol drinking (≥ 90.0 g/day) may be related to lower serum adiponectin levels in Korean men.

TOPAS: an innovative proton Monte Carlo platform for research and clinical applications

PURPOSE

While Monte Carlo particle transport has proven useful in many areas (treatment head design, dose calculation, shielding design, and imaging studies) and has been particularly important for proton therapy (due to the conformal dose distributions and a finite beam range in the patient), the available general purpose Monte Carlo codes in proton therapy have been overly complex for most clinical medical physicists. The learning process has large costs not only in time but also in reliability. To address this issue, we developed an innovative proton Monte Carlo platform and tested the tool in a variety of proton therapy applications.

METHODS

Our approach was to take one of the already-established general purpose Monte Carlo codes and wrap and extend it to create a specialized user-friendly tool for proton therapy. The resulting tool, TOol for PArticle Simulation (TOPAS), should make Monte Carlo simulation more readily available for research and clinical physicists. TOPAS can model a passive scattering or scanning beam treatment head, model a patient geometry based on computed tomography (CT) images, score dose, fluence, etc., save and restart a phase space, provides advanced graphics, and is fully four-dimensional (4D) to handle variations in beam delivery and patient geometry during treatment. A custom-designed TOPAS parameter control system was placed at the heart of the code to meet requirements for ease of use, reliability, and repeatability without sacrificing flexibility.

RESULTS

We built and tested the TOPAS code. We have shown that the TOPAS parameter system provides easy yet flexible control over all key simulation areas such as geometry setup, particle source setup, scoring setup, etc. Through design consistency, we have insured that user experience gained in configuring one component, scorer or filter applies equally well to configuring any other component, scorer or filter. We have incorporated key lessons from safety management, proactively removing possible sources of user error such as line-ordering mistakes. We have modeled proton therapy treatment examples including the UCSF eye treatment head, the MGH stereotactic alignment in radiosurgery treatment head and the MGH gantry treatment heads in passive scattering and scanning modes, and we have demonstrated dose calculation based on patient-specific CT data. Initial validation results show agreement with measured data and demonstrate the capabilities of TOPAS in simulating beam delivery in 3D and 4D.

CONCLUSIONS

We have demonstrated TOPAS accuracy and usability in a variety of proton therapy setups. As we are preparing to make this tool freely available for researchers in medical physics, we anticipate widespread use of this tool in the growing proton therapy community.

The fate of Treponema denticola within human gingival epithelial cells

Treponema denticola is one of the major pathogens associated with chronic periodontitis. Bacterial invasion into gingival tissues is a critical process in the pathogenesis of periodontal disease. We recently reported that T. denticola can invade gingival epithelial cells. The aim of this study is to determine the fate of internalized T. denticola in gingival epithelial cells. Immortalized human gingival epithelial HOK-16B cells were infected with 5- (and 6-) carboxy-fluorescein diacetate succinimidyl ester (CFSE)-labeled live or heat-killed T. denticola for 24 h, and the presence of bacteria inside the cells was confirmed by confocal microscopy. Live T. denticola, but not heat-killed bacteria, invaded HOK-16B cells. Confocal microscopy also revealed that internalized T. denticola rarely colocalized with either endosomes or lysosomes. Transmission electron microscopy of infected cells showed that intracellular T. denticola was localized inside endosome-like structures. Although a culture-based antibiotics protection assay could not detect viable intracellular T. denticola 12 h after infection, a substantial number of bacteria were observed by confocal microscopy and weak expression of bacterial 16S ribosomal RNA was detected 48 h after infection. In addition, flow cytometric analysis of HOK-16B cells infected with CFSE-labeled T. denticola showed no loss of fluorescence over 48 h. Collectively, T. denticola invades gingival epithelial cells and remains within the host cells for many hours by resisting endolysosomal degradation. These findings may provide new insight into the role of T. denticola in the pathogenesis of periodontitis.

SU-E-T-500: Pencil-Beam versus Monte Carlo Based Dose Calculation for Proton Therapy Patients with Complex Geometries. Clinical Use of the TOPAS Monte Carlo System

PURPOSE

To investigate the necessity of the verification of dose distributions using Monte Carlo (MC) simulations for proton therapy of head and neck patients and other complex patient geometries.

METHODS

TOPAS, a TOol for PArticle Simulations that makes MC simulations easy-to-use for research and clinical use and is layered on top of Geant4, has been used to simulate the treatments of head and neck patients at the Massachusetts General Hospital (MGH). The resulting dose distributions have been compared to pencil beam calculations based on the XiO treatment planning system. Dose difference distributions were used to highlight areas where the two algorithms did not agree. Dose volume histograms are utilized to investigate the overall agreement of the planned doses in target structures.

RESULTS

21 head and neck patients, both nasopharynx and spinal cord, were investigated. The field complexity ranges from a single field up to 13 fields. For all patients, the dose in the clinical target volume agrees well. Nevertheless, differences in critical structures around the targets have been observed mostly due to range differences between the two algorithms.

CONCLUSIONS

Pencil beam algorithms provide an accurate description of dose in the target volume. However, we conclude that the differences between MC simulations and pencil beam algorithms in regions outside the target for complex geometries, such as present in head and neck patients, support the necessity of routine use of MC simulations for treatment verifications before treatment. TOPAS is aiming to make such routine simulations available to all researchers and clinics. An automated interface utilizing TOPAS to enable such simulations has been developed at MGH and should become routinely used in the near future for patients with complex geometries. NIH/NCI R01 CA140735.

SU-E-T-234: LET Measurement Using Nuclear Emulsion and Monte Carlo Simulation for Proton Beam

PURPOSE

The significant issue of particle therapy such as proton and carbon ion biological effect on tumors and normal tissue. This effect closely connected with linear-energy-transfer (LET). This work presents a Monte Carlo study using GEANT4 and the verification using Nuclear Emulsion to show LET for proton beam.

METHODS

National Cancer Center (NCC) has IBA Beam Nozzle and cyclotron for proton therapy. We use proton beam bragg peak range 14cm. Also, we already developed the simulation using GEANT4 and finished validation for scattering proton beam. In our simulation, we make same condition with experimental setup.Nuclear emulsion films interleaved with tissue equivalent absorbers can be fruitfully used to reconstruct proton tracks with very high precision. This Nuclear emulsion film has been supported from Nagoya University, analyzed in Pusan University, was irradiated with a therapeutic proton beam at NCC. The Emulsion packs was located at entrance and bragg peak region of proton. This position means low and high LET region. The scanning of the emulsions has been performed at Nagoya University, where a fully automated microscopic scanning technology has been developed for the OPERA experiment on neutrino oscillations.

RESULTS

We could see the reconstructed track of proton scanning emulsion. From film scanning, we got the LET distribution at low and high LET region for several proton tracks. Simulation results was similar distribution within standard deviation in acceptance level. Also we got the RBE distribution using LET measurement for proton beam.

CONCLUSIONS

We measured LET at entrance and bragg peak region using Monte Carlo study and Nuclear Emulsion film, for NCC proton beam. This results means the good observation of LET using the nuclear emulsion. And this method can be used successfully in medical field.