Preliminary study for the management of construction and demolition waste

This paper refers to the management of the construction and demolition (C&D) waste since, according to the EU Waste Strategy, C&D waste is considered to be one of the priority waste streams and appropriate actions need to be taken with respect to its effective management. Initially, the paper presents the state-of-the-art of the problem of C&D waste, including the amount and composition of C&D waste in EU countries, differences in the characteristics of this waste stream depending on its origin, as well as collection and management practices that are applied. A methodology is described for the estimation of the quantities of the waste stream under examination, since in most cases quantitative primary data is not available. Next, the fundamentals for the development of an integrated scheme for the management of C&D waste are presented and discussed, such as appropriate demolition procedures and location of waste management (off-site waste management, on-site waste management, direct on-site recovery, centralized on-site recovery). Finally, taking into consideration all relevant parameters, alternative systems that could be applied for the management of the C&D waste are suggested.

Analysis of results from the operation of a pilot plasma gasification/vitrification unit for optimizing its performance

Plasma gasification/vitrification is an innovative and environmentally friendly method of waste treatment. A demonstration plasma gasification/vitrification unit was developed and installed in Viotia region in order to examine the efficiency of this innovative technology in dealing with hazardous waste. The preliminary results from the trial runs of the plasma unit, as well as the study of the influence of certain parameters in the system performance are presented and analyzed in this paper, contributing to the improvement of the operation performance. Finally, data on the final air emissions and the vitrified ash toxicity characteristic leaching procedure (TCLP) results are provided in order to assess the environmental performance of the system. The produced slag was found to be characterized by extremely low leaching properties and can be utilized as construction material, while the values of the polluting parameters of the air emissions were satisfactory.

Multi-criteria analysis for the determination of the best WEEE management scenario in Cyprus

Waste from electrical and electronic equipment (WEEE) constitutes one of the most complicated solid waste streams in terms of its composition, and, as a result, it is difficult to be effectively managed. In view of the environmental problems derived from WEEE management, many countries have established national legislation to improve the reuse, recycling and other forms of recovery of this waste stream so as to apply suitable management schemes. In this work, alternative systems are examined for the WEEE management in Cyprus. These systems are evaluated by developing and applying the Multi-Criteria Decision Making (MCDM) method PROMETHEE. In particular, through this MCDM method, 12 alternative management systems were compared and ranked according to their performance and efficiency. The obtained results show that the management schemes/systems based on partial disassembly are the most suitable for implementation in Cyprus. More specifically, the optimum scenario/system that can be implemented in Cyprus is that of partial disassembly and forwarding of recyclable materials to the native existing market and disposal of the residues at landfill sites.

Multi-criteria decision aid approach for the selection of the best compromise management scheme for ELVs: the case of Cyprus

Each alternative scheme for treating a vehicle at its end of life has its own consequences from a social, environmental, economic and technical point of view. Furthermore, the criteria used to determine these consequences are often contradictory and not equally important. In the presence of multiple conflicting criteria, an optimal alternative scheme never exists. A multiple-criteria decision aid (MCDA) method to aid the Decision Maker (DM) in selecting the best compromise scheme for the management of End-of-Life Vehicles (ELVs) is presented in this paper. The constitution of a set of alternatives schemes, the selection of a list of relevant criteria to evaluate these alternative schemes and the choice of an appropriate management system are also analyzed in this framework. The proposed procedure relies on the PROMETHEE method which belongs to the well-known family of multiple criteria outranking methods. For this purpose, level, linear and Gaussian functions are used as preference functions.

SQ-Map: efficient layered collision detection and haptic rendering

This paper presents a novel layered and fast framework for real-time collision detection and haptic interaction in virtual environments based on superquadric virtual object modeling. An efficient algorithm is initially proposed for decomposing the complex objects into subobjects suitable for superquadric modeling, based on visual salience and curvature constraints. The distance between the superquadrics and the mesh is then projected onto the superquadric surface, thus generating a distance map (SQ-Map). Approximate collision detection is then performed by computing the analytical equations and distance maps instead of triangle per triangle intersection tests. Collision response is then calculated directly from the superquadric models and realistic smooth force feedback is obtained using analytical formulae and local smoothing on the distance map. Experimental evaluation demonstrates that SQ-Map reduces significantly the computational cost when compared to accurate collision detection methods and does not require the huge amounts of memory demanded by distance field-based methods. Finally, force feedback is calculated directly from the distance map and the superquadric formulae.

Demonstration plasma gasification/vitrification system for effective hazardous waste treatment

Plasma gasification/vitrification is a technologically advanced and environmentally friendly method of disposing of waste, converting it to commercially usable by-products. This process is a drastic non-incineration thermal process, which uses extremely high temperatures in an oxygen-starved environment to completely decompose input waste material into very simple molecules. The intense and versatile heat generation capabilities of plasma technology enable a plasma gasification/vitrification facility to treat a large number of waste streams in a safe and reliable manner. The by-products of the process are a combustible gas and an inert slag. Plasma gasification consistently exhibits much lower environmental levels for both air emissions and slag leachate toxicity than other thermal technologies. In the framework of a LIFE-Environment project, financed by Directorate General Environment and Viotia Prefecture in Greece, a pilot plasma gasification/vitrification system was designed, constructed and installed in Viotia Region in order to examine the efficiency of this innovative technology in treating industrial hazardous waste. The pilot plant, which was designed to treat up to 50kg waste/h, has two main sections: (i) the furnace and its related equipment and (ii) the off-gas treatment system, including the secondary combustion chamber, quench and scrubber.

Development of guidelines on best practices for the slaughter of animals in Cyprus

Cyprus is one of the candidate countries to become a full member of the European Union. In order to access formally to the EU, Cyprus has to follow an implementation process and take into account all the obligations that the fifteen Member States have to respect. A large number of obligations derive from the European Integrated Pollution Prevention and Control (IPPC) Directive 96/61/EC, which intends to result in the protection of the environment as a whole and the public health as well. This will be the outcome of determining ways of pollution prevention and control for several industrial sectors, which are covered by the IPPC Directive and then taking action so that all operators act according to the Directive's demands. In this framework, the National Technical University of Athens, after thorough examination of a large number of documents relevant to the Best Available Techniques (BATs), developed guidelines for the application of BATs for 14 categories of the industry of Cyprus. This paper concerns the developed guidelines for slaughterhouses.