The influence of particle size on radionuclide activity concentrations in Tejo River sediments

Sediment samples from Tejo River were analyzed for (228)Ra, (226)Ra, (137)Cs and (40)K by HPGe gamma spectrometry. The activity concentration data were statistically analyzed. The activity concentrations values were in the range of about two orders of magnitude for each radionuclide. The influence of the particle size on the radionuclide concentrations was observed. The different environmental origins of the radionuclides (228)Ra, (226)Ra, (137)Cs and (40)K, in the sediments were demonstrated through correlation analysis. Cluster analysis showed a close relationship between (228)Ra and (226)Ra and a different behavior for (40)K. The data obtained in this study provides useful information on the background radioactivity of the studied area and can be further used for radiological mapping of the Tejo River.

Acute renal failure according to the RIFLE and AKIN criteria: a multicenter study

OBJECTIVE

To determine the incidence of acute renal failure (ARF) in critically ill patients using the RIFLE and AKIN criteria.

DESIGN

A prospective, multicenter observational study with a duration of one year from February 2010 was carried out. RIFLE and AKIN were employed using the urinary (UC) and creatinine criteria (CC) jointly and separately.

SCOPE

Nine polyvalent Critical Care Units (CCUs) in Argentina.

PATIENTS

A total of 627 critical patients over 18 years of age were admitted to the CCU for more than 48h.

EXCLUSION CRITERIA

inability to quantify diuresis, surgical instrumentation of the urinary tract, and need for renal support therapy (RST).

VARIABLES OF INTEREST

Calculated hourly diuresis (CHD) was used to apply the UC.

RESULTS

The incidence of ARF was 69.4% and 51.8% according to RIFLE and AKIN, respectively. UC detected ARF in 59.5% of cases, while CC identified ARF in 34.7% (RIFLE) and 25.3% (AKIN). The mortality rate was 40.9% and 44.6% according to RIFLE and AKIN respectively, was significantly higher than in patients without ARF, and increased with disease severity (Data processing: Excel, SQL and SPSS. Levene test, comparison of means with Student t and chi-squared, with 95% confidence interval).

CONCLUSIONS

RIFLE identified more cases of ARF. UC proved more effective than CC. The presence of ARF and severity levels were correlated to mortality but not to days of stay in the CCU. Implementation of the unified CHD was useful for implementing UC and achieving comparable results.

Structure Development in Injection Molding: A 3D Simulation with a Differential Formulation of the Kinetic Equations

The purpose of the present work is to introduce a crystallization law into Rem3D, a 3D code written in C++ and dedicated to the injection molding of polymers. We kept the basic hypotheses of Avrami's model and cast the kinetic equations into a differential system that is solved numerically. The variation of the density of potential nuclei with temperature is taken into account. Furthermore, the distribution of mean spherulite sizes can be deduced from the calculations. The second part of the paper is an experimental study of crystallization in well-controlled conditions (2D, isothermal or constant cooling-rate). It establishes a procedure for the determination of the nucleation and growth parameters used in the theoretical model, and gives a first validation of this model. Finally, the crystallization equations are introduced into Rem3D, in order to assess the feasibility of our new approach. Some typical results concerning the evolution of the transformed volume fraction in injection-molded parts are presented.

Advanced Finite Element 3D Injection Molding

In this paper, we present aspects and examples relating to Rem3D, a 3D finite element software dedicated to the computation of the entire injection molding cycle (filling, packing and cooling). Recent developments are presented, namely mesh generation and adaptation driven by a local natural metric, compressible Stokes and temperature solvers, as well as a multidomain approach. As an example of the application of Rem3D, computations have been compared with well instrumented experiments for a complex mold geometry.

Injection Molding of Fibre Reinforced Thermoplastics: Integration of Fibre Orientation and Mechanical Properties Computations

Injection molding is widely used to process short fibre reinforced thermoplastics. The quality and especially the mechanical properties of the resulting part are linked to the mold conception (for example the gate(s) and the venting port(s) locations) and to the processing parameters which will govern fibre orientation distribution. Fibre orientation modelling is based on the well known Folgar and Tucker equation. The models differ one from another by the interaction parameter, the closure approximation and by the coupling with the rheology of the reinforced melt. Quantitative comparison with experiments is very tedious and generally limited to simple part geometries (plaque or disk). As a consequence, in complex geometries, fibre orientation distribution is experimentally checked using several techniques and the resulting anisotropic thermo-mechanical properties are computed using various homogenization theories. In this paper, we propose a first integrated approach of the injection molding of fibre reinforced thermoplastics starting from rheology of the material, orientation equation, interaction parameter and closure approximation. The resulting local fibre orientation distribution is then used in two ways in order to predict the mechanical properties of the part: first, using classical analytical homogenization theories, but based on the computed orientation tensor and not on an experimental one, and then, using numerical homogenization which consists in generating a Representative Elementary Volume (REV), determining its unidirectional mechanical properties and finally, in computing directly the anisotropic properties of the part.

Polyploidy and microsatellite variation in the relict tree Prunus lusitanica L.: how effective are refugia in preserving genotypic diversity of clonal taxa?

Refugia are expected to preserve genetic variation of relict taxa, especially in polyploids, because high gene dosages could prevent genetic erosion in small isolated populations. However, other attributes linked to polyploidy, such as asexual reproduction, may strongly limit the levels of genetic variability in relict populations. Here, ploidy levels and patterns of genetic variation at nuclear microsatellite loci were analysed in Prunus lusitanica, a polyploid species with clonal reproduction that is considered a paradigmatic example of a Tertiary relict. Sampling in this study considered a total of 20 populations of three subspecies: mainland lusitanica (Iberian Peninsula and Morocco), and island azorica (Azores) and hixa (Canary Islands and Madeira). Flow cytometry results supported an octoploid genome for lusitanica and hixa, whereas a 16-ploid level was inferred for azorica. Fixed heterozygosity of a few allele variants at most microsatellite loci resulted in levels of allelic diversity much lower than those expected for a high-order polyploid. Islands as a whole did not contain higher levels of genetic variation (allelic or genotypic) than mainland refuges, but island populations displayed more private alleles and higher genotypic diversity in old volcanic areas. Patterns of microsatellite variation were compatible with the occurrence of clonal individuals in all but two island populations, and the incidence of clonality within populations negatively correlated with the estimated timing of colonization. Our results also suggest that gene flow has been very rare among populations, and thus population growth following founder events was apparently mediated by clonality rather than seed recruitment, especially in mainland areas. This study extends to clonal taxa the idea of oceanic islands as important refugia for biodiversity, since the conditions for generation and maintenance of clonal diversity (i.e. occasional events of sexual reproduction, mutation and/or seed immigration) appear to have been more frequent in these enclaves than in mainland areas.

Toxicity reduction and biodegradability enhancement of cork processing wastewaters by ozonation

Biodegradability enhancement and detoxification of cork boiling wastewater (CBW) are required for the successful implementation of biological treatment options. We studied the possibility of achieving these goals through ozonation pre-treatment by experimenting on the effect of ozone dose and pH. The CBW used had a pH of 5.81, a chemical oxygen demand (COD) of 1,865 mg L(-1), a biochemical oxygen demand (BOD5) of 498 mg L(-1) and total phenol (TP) and tannin compounds concentrations of 523 and 399 mg L(-1), respectively. The ozone doses ranged from 0.27 to 2.63 for the O3(applied)/COD0 ratios with samples at natural pH and set to 3.33 and 9.96. Ozonation allowed the BOD20/COD ratio (biodegradability index) to increase from 0.37 to 0.63 and a toxicity reduction from 3.08 to 1.24 TU (Microtox). The corresponding removals obtained were 15.2-62.0%, 38.4-83.2% and 56.7-92.1% for COD, TP and colour, respectively. The best outcome of ozonation pre-treatment requires O3(applied)/COD0 ratios over 1.5 and an acid pH. The increase of TP removals with ozone dose at acid pH led to biodegradability enhancement and CBW detoxification. However, for similar conditions the highest COD removals were obtained at alkaline pH due to the hydroxyl radicals' high oxidation ability but lack of selectivity.