[Correlation between intrahepatic triglyceride content quantified by proton magnetic resonance spectroscopy and glucose metabolism]

Objective: To investigate the correlation between intrahepatic triglyceride content (IHTC) and glucose metabolism in patients with non-alcoholic fatty liver disease (NAFLD) diagnosed by proton magnetic resonance spectroscopy (¹H-MRS). Methods: A total of 239 subjects without diabetes mellitus were previously enrolled and underwent ¹H-MRS scans. Anthropometric indexes including height, weight, waist and blood pressure, and laboratory findings as plasma glucose (PG), insulin (INS), C-peptide (CP), liver enzymes [alanine aminotransferase (ALT), aspartate transaminase (AST), γ-glutamyl transpeptidase (GGT)] and lipid profiles were collected. According to IHTC levels, participants were divided into three groups: the non-NAFLD group (IHTC<5.56%), the mild NAFLD group (IHTC 5.56%-<33%), and the moderate and severe NAFLD group (IHTC ≥ 33%). The clinical characteristics of each group were analyzed, and the correlation between IHTC and glucose metabolism were assessed. Results: Compared with those in the non-NAFLD group, male proportion, waist, 120 min postprandial PG (PG120), CP, liver enzymes and total cholesterol (TC) levels were greater in the NAFLD group, whereas insulin sensitivity index-Cederholm (ISI-Cederholm) and high density lipoprotein cholesterol (HDL-C) levels were lower in the NAFLD groups. Subjects in the moderate and severe NAFLD group had higher levels of 120 min postprandial INS (INS120) and Stumvoll indexes, and lower ISI-Cederholm than those in the mild NAFLD group [80.37 (57.68, 112.70) mU/L vs.110.50(71.78, 172.80)mU/L, 1453(1178, 1798)vs.1737(1325, 2380), 358(297, 446) vs.441(318, 594), 2.27(2.01, 2.53) vs.2.06(1.81, 2.39), respectively, all P<0.05]. Correlation analyses showed that IHTC was significantly positively correlated with waist hip ratio (WHR), PG120, INS120, HOMA insulin resistance (HOMA-IR), Stumvoll 1st-insulin secretion, Stumvoll 2nd-insulin secretion, ALT, AST, GGT and TC (r=0.197, 0.274, 0.334, 0.162, 0.199, 0.211, 0.406, 0.361, 0.215, and 0.196, respectively, all P<0.05), and negatively correlated with ISI-Cederholm and HDL-C (r=-0.334, and-0.237, respectively, all P<0.05). Furthermore, a multiple linear stepwise regression analysis indicated that ISI-Cederholm (Standardized β =-0.298, P<0.001) and Stumvoll 1st insulin secretion (Standardized β = 0.164, P = 0.024) were independent factors of IHTC. Conclusions: Peripheral insulin resistance occurs in the early stage of NAFLD and becomes worse with the progression of the disease. IHTC was independently associated with insulin sensitivity and first-phase insulin secretion.

[Correlation between nUGT1A1 gene polymorphisms and adverse events of irinotecan plus S-1 for patients with recurrent or metastatic esophageal squamous cell carcinoma: a prospective, open-label, randomized controlled trial (ESWN 01)]

Objective: To investigate the correlation between UGT1A1 polymorphisms and the irinotecan plus S-1 regimen-induced toxicities in Chinese advanced esophageal squamous cell carcinoma (ESCC) patients. Methods: A total of 46 recurrent or metastatic ESCC patients selected from ESWN 01 trial were randomly assigned to irinotecan plus S-1 group [intravenous infusion of irinotecan (160 mg/m(2)) on day 1 and oral S-1 (80-120 mg) on days 1-10, repeated every 14 days]. Peripheral venous blood at baseline was collected and genomic DNA was extracted. The genetic polymorphisms of UGT1A1*6 and UGT1A1*28 were analyzed by polymerase chain reaction (PCR) amplification. Irinotecan plus S-1 regimen-induced toxicities of patients with different UGT1A1 polymorphisms were observed. The correlation between UGT1A1 polymorphisms and the adverse effects was analyzed. Results: Among the 46 patients, the numbers of UGT1A1*6 wild type genotype (GG), mutant heterozygote (GA) and mutant homozygote (AA) were 30, 15 and 1, while those with UGT1A1*28 wild type genotype (TA6/6), mutant heterozygote (TA6/7) and mutant homozygote (TA7/7) were 36, 8 and 2, respectively. Only one patient with UGT1A1*6 AA genotype occurred grade 3 diarrhea, while one of the 2 patients with UGT1A1*28 TA7/7 genotype occurred grade 4 diarrhea. No neutropenia was observed in the patient with UGT1A1*6 AA genotype, however, both of the two patients with UGT1A1*28 TA7/7 genotype occurred grade 3-4 neutropenia. Patients with UGT1A1*28 genetic polymorphism (TA 6/7 or TA7/7) had a higher response rate compared with wild-type TA6/6 carriers. (55.6% versus 26.5%). Conclusions: The homozygous genotype of UGT1A1*6 AA and UGT1A1*28 TA7/7 are rare (<5%) in Chinese ESCC population. Not all homozygous AA and TA7/7 carriers occur severe dose limited toxicities (DLT) when treated with irinotecan (160 mg/m(2)) plus S-1 regimen for 2 weeks. However, it's still necessary torigorously observe the occurrence of severe diarrhea and neutropenia in patients with UGT1A1*6 AA and UGT1A1*28 TA7/7 and adjust the dose timely.

Molecular mechanisms of MCM3AP-AS1 targeted the regulation of miR-708-5p on cell proliferation and apoptosis in gastric cancer cells

The article "Molecular mechanisms of MCM3AP-AS1 targeted the regulation of miR-708-5p on cell proliferation and apoptosis in gastric cancer cells, by H. Wang, T. Xu, L. Wu, H.-L. Xu, R.-M. Liu, published in Eur Rev Med Pharmacol Sci 2020; 24 (5): 2452-2461-DOI: 10.26355/eurrev_202003_20512-PMID: 32196596" has been withdrawn from the authors due to the discovery of new results. The authors decided to improve them further. The Publisher apologizes for any inconvenience this may cause. https://www.europeanreview.org/article/20512.

Male urethral diverticulum squamous cell carcinoma containing a calculus: a rare entity

Male urethral diverticula with calculi have a low incidence. It is extremely rare when the diverticulum accompanied with carcinoma. We report a case of diverticulum of the male urethra containing giant calculi which developed into squamous cell carcinoma. The patient initially presented with lower urinary tract symptoms and a hard, painless perineal mass. We believe that the process of diagnosis and treatment is of great significance in clinical practice.

Extreme ultraviolet-excited time-resolved luminescence spectroscopy using an ultrafast table-top high-harmonic generation source

We present a table-top extreme ultraviolet (XUV) beamline for measuring time- and frequency-resolved XUV-excited optical luminescence (XEOL) with additional femtosecond-resolution XUV transient absorption spectroscopy functionality. XUV pulses are generated via high-harmonic generation using a near-infrared pulse in a noble gas medium and focused to excite luminescence from a solid sample. The luminescence is collimated and guided into a streak camera where its spectral components are temporally resolved with picosecond temporal resolution. We time-resolve XUV-excited luminescence and compare the results to luminescence decays excited at longer wavelengths for three different materials: (i) sodium salicylate, an often used XUV scintillator; (ii) fluorescent labeling molecule 4-carbazole benzoic (CB) acid; and (iii) a zirconium metal oxo-cluster labeled with CB, which is a photoresist candidate for extreme-ultraviolet lithography. Our results establish time-resolved XEOL as a new technique to measure transient XUV-driven phenomena in solid-state samples and identify decay mechanisms of molecules following XUV and soft-x-ray excitation.

Hydrogen solution in high-entropy alloys

High-entropy alloys (HEAs) have been reported to have superior ability in hydrogen (H) storage and strong resistance to H embrittlement. These exceptional properties are directly related to the H solution in the HEAs. However, the diversity of atomic environments in the HEAs complicate the calculation of the H solution energy. With regard to this, we clarified an origin causing the variety of solution energy from the viewpoint of chemical and elastic interactions of H with the host atoms. Combining the semi-empirical atom potential and first-principles calculations regarding H in FeCrCoNi, NbMoTaW, and FeCuCrMnMo, we found that the elastic interaction presents a visibly linear relationship with the volume expansion caused by H insertion. By contrast, the chemical interaction shows a non-linear relationship with the volume of the interstitial polyhedron. A universal model was then established to generalize the solution energy of H. This model can expeditiously assess the H distribution and provide insight into evolution of the microstructure in HEAs.

Comparison of in-hospital outcomes and 30-days readmissions between type 1 and type 2 myocardial infarction patients: a study of the nationwide readmissions database

Introduction

Traditionally Type- 1 myocardial infarction (T1-MI) results from a plaque erosion, rupture, or fissure. In contrast, Type- 2 myocardial infarction (T2-MI) is a consequence of severe supply and demand mismatch. Despite the different mechanisms, both T1-MI and T2-MI can be associated with severe morbidity and mortality. Yet there is sparse data analyzing in-hospital outcomes and readmission rates comparing patients who present with T1-MI and T2-MI.

Purpose

We aimed to compare the outcome data of patients with T1-MI and T2-MI derived from the Nationwide Readmissions Database, a large national database of hospital readmissions.

Method

We utilized the 2018 Nationwide Readmissions Database to identify all index hospital admissions with a primary diagnosis of “acute MI” (AMI) using ICD-10 diagnosis codes. All AMI admissions were further categorized into ST-elevation myocardial infarction (STEMI), no-ST-elevation myocardial infarction (NSTEMI), or T2-MI. Primary outcomes analyzed included 30-days major adverse cardiovascular events (MACE) (defined as re-infarction, repeat revascularization and death within 30 days of admission), short term mortality and readmission rates.

Results

Among 556,816 total admissions for AMI, 28,250 (5.1%) were T2-MI. Table 1 compares baseline variables and short-term outcomes for patients with T1-MI vs T2-MI. Compared to patients with T1-MI patients with T2-MI were older, more likely to be female, and had a higher burden of comorbidities. Additionally, T2-MI patients were less likely to receive coronary revascularization during the index admission. The mean length of stay for T2-MI patients was 4.7±0.6 days, which is longer than the length of stay for STEMI patient (4.1±0.4 days) but slightly shorter than NSTEMI patient (4.9±0.4 days). T2-MI patients had a higher rate of all-cause 30-days readmissions but a lower rate of 30-days MACE. Early mortality rate (within 30 days of index admission) in T2-MI patients was comparable to NSTEMI patients but was lower than STEMI patients. Cox proportional-hazards model adjusting for age, sex, comorbidities and type of hospital setting demonstrated that T2-MI was associated with a lower 30-day MACE risk (T2-MI vs STEMI: [HR 0.33 (95% CI 0.31–0.36)]; T2-MI vs NSTEMI [HR 0.70 (95% CI 0.64–0.75)]) and a lower risk of early mortality (T2-MI vs STEMI: [HR 0.29 (95% CI 0.26–0.32)]; T2-MI vs NSTEMI [HR 0.71 (95% CI 0.65–0.79)]). The adjusted HR for 30-days all-cause readmissions was higher with T2-MI, (T2-MI vs STEMI: [HR 1.16 (95% CI 1.10–1.23)]; T2-MI vs NSTEMI: [HR 1.11 (95% CI 1.06–1.16)]).

Conclusion

T2-MI patients are older and have a higher burden of comorbidities. After adjusting for baseline comorbidities, all-cause readmission risk is higher in T2-MI but short-term MACE and mortality is lower with T2-MI.

Funding Acknowledgement

Type of funding sources: None.

[Analysis of fundus examination results in 8 808 pediatric patients in Northwest China]

Objective: To explore the incidence and age distribution of fundus abnormalities in pediatric patients aged 0-3 years in northwest China. Methods: A retrospective study of the clinical data of 8808 pediatric patients aged 0-3 years who underwent fundus examination with a wide-filed digital retinal imaging system and an indirect ophthalmoscope in our hospital from January 2008 to December 2019 were performed. There were 5092 males and 3716 females, with a median age of 1 month (range, 3 days to 3 years), a mean gestational age of 34.32 (SD 2.92) weeks (range, 24 to 42 weeks) and a mean birth weight of 2006.92 (SD 709.23) g (range, 490 to 5500 g), from Shaanxi Province (7415 cases, 84.18%), Gansu Province (770 cases, 8.74%), Ningxia Hui Autonomous Region (94 cases, 1.07%), Qinghai Province (53 cases, 0.60%), Xinjiang Uygur Autonomous Region (14 cases, 0.16%) and other neighboring areas (462 cases, 5.25%). The fundus condition of the enrolled pediatric patients was documented to calculate the annual detection rate. The joinpoint regression model was drawn to estimate the annual percent change and average annual percent change. The constituent ratios and age distribution of different types of fundus abnormalities were finally analyzed. Results: Fundus abnormalities were detected in 2 531 cases (28.74%). During the 12 years, the number of pediatric patients undergoing fundus examination each year in our center increased rapidly in the first 7 years, and then kept almost stable, while the number of fundus abnormality cases increased year by year. The positive detection rate showed an overall upward trend with an average annual percent change of +7.2%, and it was +30.09% from 2016 to 2019. Among all the pediatric patients with fundus abnormalities, there were 1 678 cases with developmental diseases (66.30%), 232 cases with hereditary diseases (9.16%), 140 cases with ocular tumor (5.53%), 64 cases with ophthalmic manifestations of systemic diseases (2.53%), 31 cases with ocular trauma (1.23%), 12 cases with infectious diseases or inflammation (0.48%) and 438 cases with other ocular abnormalities (17.31%). The top 5 abnormalities were retinopathy of prematurity (ROP; 1477 cases, 58.36%), gray patchy retinopathy (225 cases, 8.89%), retinal hemorrhage (157 cases, 6.20%), retinoblastoma (137 cases, 5.41%) and familial exudative vitreoretinopathy (77 cases, 3.04%). Fundus abnormalities varied with age. ROP, developmental diseases other than ROP, hereditary diseases, ocular trauma and infectious diseases were mostly detected in pediatric patients at 0-6 months old, while tumors were mostly detected after 1 year old. Conclusions: The detection rate of fundus abnormalities in the Department of Ophthalmology of Xijing Hospital of Air Force Medical University, a tertiary referral center in northwest China, increased notably year by year. The abnormalities were mainly developmental and hereditary lesions as well as of certain age distribution. They occurred with the highest frequency between birth and 6 months of age, in which ROP was in the ascendancy. Meanwhile, the detection rate of other developmental, hereditary and neoplastic disorders increased with age. Therefore, a comprehensive and objective understanding of the fundus disease in infants is essential. (Chin J Ophthalmol, 2021, 57: 777-783).

1286 3D Printing of Aortic Valve Scaffolds for Heart Valve Regeneration

Introduction

Valvular heart disease (VHD) has been commonly described as the forgotten epidemic, with an estimated global prevalence of 2.5%. Current heart valve replacement therapies only partially offer a solution to the problem. In recent years, synthetic polymers have been explored due to their diversity allowing tailor-picking of essential traits, such as chemical properties, physical properties, and degradation states. This project investigated the feasibility and mechanical properties of reverse three-dimensional printing of biodegradable scaffolds for heart valve regeneration.

Method

Aortic valve dimensions at an average of 100mmHg were used for the computer aided design of the valves. Aortic valve scaffolds were fabricated using the 3D-TIPs reverse printing technique. Infill densities of 30%, 40% or 50% were used. Printed polymer scaffolds were coated in gelatine solution and compared using static tensile tests. Static strength and elasticity of coated and uncoated valves were compared.

Results

At 25%, 50% and 100% strain, significantly different elastic properties in favour of coated scaffolds between coated and uncoated valves was observed. Coated valves displayed greater strength than uncoated valves (p &gt; 0.05). Computer aided design (CAD) software designed anatomically accurate scaffolds, but poor polymer coagulation was observed on the valve cusps.

Conclusions

The reverse-printing 3D-TIPS procedure successfully produces heart valve scaffolds which present architectural similarities to the naïve mitral valve, however, dimensions of the valves ought to be reassessed. Gelatine-coated valves exhibit greater elastic and tensile properties. A further understanding of cellular interactions on the polymer scaffold, in particular in vivo studies, are required for the continuity of future study.

1258 Computational Modelling Of 3D Printed Scaffolds for Heart Valve Regeneration

Aim

Prosthetic heart valve replacement remains the gold standard treatment for valvular heart disease. However, its durability is limited and there is thus a need to develop an understanding of the feasibility of alternative replacement therapies. 3-dimensional printing of heart valves has been explored due to its patient-specific design and control of desired biomechanical properties. Computational studies of the synthetic valves will contribute to optimisation of designs, as well as improved understanding of the biomechanical behaviour of the complex structures.

Method

Aortic valve dimensions at an average of 100mmHg were used for the computerised design of the valves. Fine Element Analysis modelling generated computational experiments alongside predicted results. Simulated radial pressures tests were conducted at pressures from 0mmHg to 140mmHg and compression tests were conducted at displacement levels between 0-10mm. A Young’s modulus of 0.5 MPa was used. All simulations were conducted in a quasi-static manner.

Results

As the radial pressure on the valves increased, the Mises stresses increased. The maxium Mises stress of the heart valve was 0.09MPa and 0.13MPa under the pressures of 90mmHg and 140mmHg respectively. As valve displacement increased, the Mises stress of the heart valves proportionally rose. In simulated radial pressures tests, the compressive force was 0.19N at 1mm compressive displacment and 1.8N at 10mm compressive displacment.

Conclusions

The simulations demonstrated that 3D-printed heart valve scaffolds can withstand simulated radial pressure and compression tests. A further mechanical tests of the printed scaffold and understanding of its response to hemodynamic dynamic flow is required for the continuity of further study.

Evaluation of at-home methods for N95 filtering facepiece respirator decontamination

N95 filtering facepiece respirators (FFRs) are essential for the protection of healthcare professionals and other high-risk groups against Coronavirus Disease of 2019 (COVID-19). In response to shortages in FFRs during the ongoing COVID-19 pandemic, the Food and Drug Administration issued an Emergency Use Authorization permitting FFR decontamination and reuse. However, although industrial decontamination services are available at some large institutions, FFR decontamination is not widely accessible. To be effective, FFR decontamination must (1) inactivate the virus; (2) preserve FFR integrity, specifically fit and filtering capability; and (3) be non-toxic and safe. Here we identify and test at-home heat-based methods for FFR decontamination that meet these requirements using common household appliances. Our results identify potential protocols for simple and accessible FFR decontamination, while also highlighting unsuitable methods that may jeopardize FFR integrity.

[Role of exosomal miRNA in tumor progression and its possible mechanism]

Exosome is a kind of biological nano-vesicle with a diameter of about 30-100 nm and is synthesized, secreted, and released in almost all types of body cells. Recent studies have found that exosomes contain a variety of functional proteins, including mRNA and microRNAs (miRNAs) and so on, which play an important role in the process of material transfer and information exchange in cells. In addition, the related-exosomal microRNAs secreted by tumor cells play an important role in regulating theoccurrence, development, invasion and metastasis of tumors and other biological processes.. Therefore, the study of tumor-related exosomal microRNAs will help us to explore the mechanism of tumor progression from the perspective of tumor gene regulation and new tumor markers, which will contribute to the early diagnosis, treatment, disease monitoring and prognosis evaluation.

Is simple reaction time or choice reaction time an indicator of all-cause mortality or CVD mortality?

OBJECTIVES

Simple reaction time (SRT) and choice reaction time (CRT) have been shown to be good indicators for quantitatively assessing the level of human cognitive impairment, but these parameters have also been linked to the risk of human death. This study aimed to quantitatively assess the independent predictive value of SRT or CRT for all-cause mortality or cardiovascular disease (CVD) mortality by conducting a meta-analysis of prospective studies.

STUDY DESIGN

The study design of this study is a prospective cohort study.

METHODS

We conducted a meta-analysis by combining hazard ratios (HRs) and 95% confidence intervals (95% CIs) of SRT or CRT with all-cause mortality or CVD mortality in healthy community residents aged 18 and over. Heterogeneity was evaluated by using Q statistics and Cochrane's I² statistics.

RESULTS

A total of seven prospective studies that examined all-cause mortality and CVD mortality were included. The pooled HR of all-cause mortality in SRT was 1.099 (1.065-1.134, I² = 11.9%), and an increased risk of CVD mortality was associated with lower SRT (HR = 1.186, 95% CI = 1.137-1.236; I² = 52.4%). Similarly, the pooled HR of all-cause mortality in CRT was 1.140 (95% CI = 1.085-1.197, I² = 33.7%). However, lower CRT was not statistically associated with an increased risk of CVD mortality.

CONCLUSION

SRT may be a predictor of all-cause-mortality and CVD mortality, and CRT is significantly associated with an increased risk of all-cause mortality.

Bottom-Up Nanofabrication with Extreme-Ultraviolet Light: Metal-Organic Frameworks on Patterned Monolayers

The fabrication of integrated circuits with ever smaller (sub-10 nm) features poses fundamental challenges in chemistry and materials science. As smaller nanostructures are fabricated, thinner layers of materials are required, and surfaces and interfaces gain a more important role in the formation of nanopatterns. We present a new bottom-up approach in which we use the high optical resolution offered by extreme ultraviolet (EUV) lithography to print patterns on self-assembled monolayers (SAMs). Upon radiation, low-energy electrons induce chemical changes in the SAM so that the projected image is transferred to the substrate surface. We use the chemical differences between exposed and unexposed regions to promote a selective growth of hybrid structures that can act as an etch-resistant layer for further pattern transfer or can be used as functional nanostructures. The EUV doses required to promote selective growth on exposed areas are close to industrial requirements. Furthermore, this method allows for the independent tuning of different steps in the EUV lithography process (photo-induced chemistry, spatially resolved chemical contrast, and formation of nanopatterns), an advantage over current resists, in which the same material plays all roles.

[mTOR signaling pathway-mediated autophagy involved in inhibition of osteoblast differentiation induced by cadmium in human bone marrow mesenchymal stem cells]

Objective: To investigate the role of autophagy mediated by mTOR signaling pathway in the inhibition of osteogenic differentiation of human bone marrow mesenchymal stem cells (hBMSCs) induced by cadmium. Methods: HBMSCs were divided into 0, 2.5 or 5.0 μmol/L groups according to the exposure dose of cadmium chloride (CdCl₂), and each group was treated for 1 day, 4 days and (or) 7 days. The ALP activity and mRNA and protein expression levels of osteogenesis markers (ALP, RUNX2 and OSTERIX), autophagy-related proteins (LC3 and Beclin-1) and mTOR signaling pathway related proteins (mTOR, p-mTOR and p-p70S6K) expression, alkaline phosphatase staining and alizarin red staining were detected. MHY 1485 was selected as the signaling pathway activator. The control group, CdCl₂ group (5.0 μmol/L), MHY 1485 group and CdCl₂+MHY 1485 combined treatment group were set. After 7 days of treatment, the expression levels of autophagy related proteins and mTOR signaling pathway related proteins of hBMSCs in each group were detected. Results: There was no significant difference in ALP activity between 0, 2.5 and 5.0 μmol/L groups on day 1 and 4 (P>0.05); On day 7, compared with the 0 μmol/L group, the ALP activity, expression of osteogenic markers (ALP, RUNX2, OSTERIX) and mTOR signaling pathway related proteins (mTOR, p-mTOR, p-p70S6K) expression decreased in the 2.5 and 5.0 μmol/L group (P<0.05). Compared with the 0 μmol/L group, the staining of the 2.5 and 5.0 μmol/L groups became lighter, and the formation of ALP and mineralized nodules was reduced. Compared with the CdCl₂ group, the autophagy related protein expression in the CdCl₂+MHY 1485 combined treatment group decreased, and the mTOR signaling pathway related protein expression increased. The difference was statistically significant (P<0.05). Conclusion: The inhibition of osteogenic differentiation of hBMSCs by cadmium may be related to autophagy mediated by mTOR signaling pathway.