Clinical Efficacy of Combination Intravenous and Intraperitoneal Chemotherapy in the Treatment of Gastric Cancer With Peritoneal Carcinomatosis

Background: Gastric cancer (GC) is prone to metastasis that typically resulted in peritoneal carcinomatosis (PC). GC patients with PC have an extremely poor clinic prognosis. Although GC is sensitive to chemotherapy, PC causes chemotherapy failure. Recent studies showed the combination of intravenous and intraperitoneal chemotherapy can significantly improve the survival rates in GC patients with PC. Aim: To identify the clinical and adverse effects of intravenous chemotherapy combined with intraperitoneal perfusion chemotherapy in the treatment of abdominal peritoneal carcinomatosis arising from gastric cancer. Methods: Retrospective analysis was performed on 49 patients with abdominal peritoneal carcinomatosis from gastric cancer who were treated at the Fujian Medical University Union Hospital between September 2010 and September 2015. The patients were divided into 2 groups based on treatment method: patients subjected to intravenous chemotherapy (n = 27), referred to as the simple group and patients subjected to combined intravenous and intraperitoneal chemotherapy (n = 22), referred to as the combination group. The short-term effects and adverse effects were evaluated based on treatment method, in conjunction with a related review of the results. The long-term effect was evaluated based on the survival rate and median survival time of both groups of patients at 12, 18, 24, 30, 36, and 60 months, as determined through follow-up. Results: Gender, age, ECOG scores before treatment, clinical stages, and the pathologic data of advanced GC patients of the 2 groups were equally distributed. The objective efficacy evaluation results showed that the objective response rate (ORR) and disease control rate (DCR) of the simple group after treatment were significantly lower than in the combination group. The median survival time (MST) of the simple group was (6.57 ± 0.75) months, which was significantly shorter than in the combination group (15.03 ± 2.31) months ( P < 0.05). In addition, the 12-, 18-, 24-, 30-, 36-, and 60-month survival rates of the simple group were all significantly lower than those of the combination group. Furthermore, combined therapy improved the physical condition of the patients. The incidence of adverse reactions in the 2 groups was not statistically significant; neither of the treatments resulted in severe complications. Conclusion: Compared with intravenous chemotherapy alone, the combined intravenous and intraperitoneal perfusion chemotherapy was more effective in improving quality of life and extending survival in time patients with abdominal peritoneal carcinomatosis from gastric cancer. In addition, the treatment produced only mild adverse effects, showing that it is tolerable and therefore worth further clinical study.

Genome-wide compound heterozygosity analysis highlighted 4 novel susceptibility loci for congenital heart disease in Chinese population

Genome-wide association studies (GWASs) have achieved great success in deciphering the genetic cause of congenital heart disease (CHD). However, the heritability of CHD remains to be clarified, and numerous genetic factors responsible for occurrence of CHD are yet unclear. In this study, we performed a genome-wide search for relaxed forms of compound heterozygosity (CH) in association with CHD using our existing GWAS data including 2265 individuals (957 CHD cases and 1308 controls). CollapsABEL was used to iteratively test the association between the CH genotype and the CHD phenotype in a sliding window manner. We highlighted 17 genetic loci showing suggestive CH-like associations with CHD (P < 5 × 10^-8 ), among which 4 genetic loci had expression quantitative trait loci (eQTL) effects in blood (P_eQTL  < 0.01). After conditional association analysis, each loci had only 1 independently effective signal reaching the significance threshold (rs2071477/rs3129299 at 6p21.32, P = 2.47 × 10^-10 ; rs10773097/rs2880921 at 12q24.31, P = 3.30 × 10^-8 ; rs73032040/rs7259476 at 19q13.11, P = 1.14 × 10^-8 ; rs10416386/rs4239517 at 19q13.31, P = 1.15 × 10^-9 ), together explained 7.83% of the CHD variance. Among these 4 associated loci, outstanding candidates for CHD-associated genes included UBC, CFM2, ZNF302, LYPD3 and CADM4. Although replication studies with larger sample size are warranted, the first CH GWAS of CHD may extend our current knowledge of the genetic contributions to CHD in the Han Chinese population.

Hydrogen Peroxide Might Bleach Natural Dentin by Oxidizing Phosphoprotein

Recent studies suggested that bleaching agents may whiten teeth by oxidizing the fluorescent materials, which are the proteins located in the organic-inorganic interface. Therefore, we postulated that fluorescence of dentin came from dentin phosphoprotein (DPP) and that bleaching agents might bleach dentin by oxidizing DPP. Fifty-six specimens were randomly divided into 4 groups and exposed to distilled water, hydrogen peroxide (HP), ethylenediamine tetraacetic acid disodium salt (EDTA), and acetic acid for 24 h. After measuring the organic and inorganic components, fluorescence, and color characteristics of dentin before and after exposure, we found that when DPP was removed from dentin by EDTA, fluorescent intensity declined proportionally with the reduction in Raman relative intensity, and dentin was whitened considerably, with an Δ E value 6 times higher than that of the distilled water group. On the contrary, due to the incapability of acetic acid to dissolve DPP during decalcification, fluorescent intensity values and tooth color remained nearly unchanged after exposure to acetic acid. Dentin exposed to neutral HP showed no obvious morphologic and organic/inorganic component changes except for the destruction of DPP. Similarly, dramatically decreased fluorescent intensity and lightened color were found in the HP group. Moreover, DPP solution of the HP group exhibited decreased ultraviolet absorbance, especially between 250 and 300 nm, which arose from aromatic amino acids. The results indicated that DPP was responsible for the fluorescent properties of dentin and that HP might bleach dentin by the oxidization of aromatic amino acids in DPP. These findings are of great significance in promoting our further understanding of the mechanism of tooth bleaching and the fluorescent property of normal dentin.

[Analysis of preoperative predictive factors and clinical characteristics in patients with parathyroid carcinoma]

Objective: To evaluate the clinical characteristics and preoperative predictive factors in patients with parathyroid carcinoma. Methods: From January 2010 to December 2016, 150 patients with pathologically and biochemically confirmed primary hyperparathyroidism were enrolled in this study. The clinical data were reviewed to define 28 cases of parathyroid hyperplasia, 14 cases of parathyroid carcinoma (PC), and 108 cases of parathyroid adenoma (PA). The clinical characteristics between PC and PA group were compared and analyzed to explore predictive factors for PC. Results: Patients in PC group were significantly younger than those in PA group (47.9±13.9 vs 57.2±14.6 years, P=0.026). The diameter of tumor in PC group was larger than that in PA group (3.6±1.8 vs 2.2±1.4 cm, P=0.005). The levels of albumin-corrected serum calcium, parathyroid hormone (PTH), and alkaline phosphatase (AKP) were all higher in PC group than those in PA group (3.4±0.6 vs 2.9±0.3 mmol/l; 1 157.1 vs 201.6 pg/ml; 168 vs 97 IU/L; all P<0.05). PC correlated with age(r=-0.241, P=0.007), albumin-corrected serum calcium (r=0.324, P<0.001), PTH levels (r=0.301, P=0.001), serum AKP (r=0.217, P=0.019) and tumor size(r=0.238, P=0.011). Receiver operator characteristic curve analysis showed that the optimum cut-off values as follows: albumin-corrected serum calcium 3.15 mmol/L, serum PTH concentration 1 011 pg/ml and tumor diameter 3.35 cm. These indicators can be helpful in the preoperative diagnosis of PC. Conclusions: Patients with PC were younger than the patients with PA. Albumin-corrected serum calcium, serum PTH concentration, and tumor diameter can be helpful in preoperative diagnosis of PC.

Pathway level alterations rather than mutations in single genes predict response to HER2-targeted therapies in the neo-ALTTO trial

Background

We performed whole-exome sequencing of pretreatment biopsies and examined whether genome-wide metrics of overall mutational load, clonal heterogeneity or alterations at variant, gene, and pathway levels are associated with treatment response and survival.

Patients and Methods

Two hundred and three biopsies from the NeoALTTO trial were analyzed. Mutations were called with MuTect, and Strelka, using pooled normal DNA. Associations between DNA alterations and outcome were evaluated by logistic and Cox-proportional hazards regression.

Results

There were no recurrent single gene mutations significantly associated with pathologic complete response (pCR), except PIK3CA [odds ratio (OR) = 0.42, P = 0.0185]. Mutations in 33 of 714 pathways were significantly associated with response, but different genes were affected in different individuals. PIK3CA was present in 23 of these pathways defining a ‘trastuzumab resistance-network’ of 459 genes. Cases with mutations in this network had low pCR rates to trastuzumab (2/50, 4%) compared with cases with no mutations (9/16, 56%), OR = 0.035; P < 0.001. Mutations in the ‘Regulation of RhoA activity’ pathway were associated with higher pCR rate to lapatinib (OR = 14.8, adjusted P = 0.001), lapatinib + trastuzumab (OR = 3.0, adjusted P = 0.09), and all arms combined (OR = 3.77, adjusted P = 0.02). Patients (n = 124) with mutations in the trastuzumab resistance network but intact RhoA pathway had 2% (1/41) pCR rate with trastuzumab alone (OR = 0.026, P = 0.001) but adding lapatinib increased pCR rate to 45% (17/38, OR = 1.68, P = 0.3). Patients (n = 46) who had no mutations in either gene set had 6% pCR rate (1/15) with lapatinib, but had the highest pCR rate, 52% (8/15) with trastuzumab alone.

Conclusions

Mutations in the RhoA pathway are associated with pCR to lapatinib and mutations in a PIK3CA-related network are associated with resistance to trastuzumab. The combined mutation status of these two pathways could define patients with very low response rate to trastuzumab alone that can be augmented by adding lapatinib or substituting trastuzumab with lapatinib.

[Operative strategy and clinical results of complex four part distal radius fractures by combined palmar and dorsal internal fixation]

Objective: To explore a standard procedure for the treatment of combined dorsal and palmar internal fixation for complex four part distal radius fractures and assess its clinical results. Methods: From May 2009 to October 2016, 38 patients(39 sides)who suffered from complex four part distal radius fractures were performed operatively with open reduction and internal fixation via combined dorsal and palmar approach in Department of Orthopaedic Trauma, Qilu Hospital of Shandong University(Qingdao). The series included 22 males(22 sides) and 16 females(17 sides). Age of the patients was 53.5 years ranging from 25 to 79 years.According to Melone classification, there were 34 sides of type of Ⅳ, 5 of type Ⅴ.According to Frykman classification, there were 15 sides of type Ⅶ, 24 sides of type Ⅷ, and all the cases were type C3 according to AO/OTA classification.Preoperatively, the key articular fragments in four part distal radius fractures were identified and the individual fracture patterns from conventional X-ray and CT-scan were analyzed. All the patients were performed combined volar and dorsal fixation.Firstly, a palmar approach which gave access to and fix the palmar-ulnar fragment and the radial styloid fragment was performed.Then a limited dorsal approach across the third extensor compartment which gave access to the dorso-ulnar fragment and a limited dorsal arthrotomy to visualize the radiocarpal joint when necessary were performed.Through dorsal approach, we can address the dorso-ulnar fragment, free intra-articular fragment and direct visualize the joint.Use of a retinacular flap was routinely advocated to help prevent against tendon irritation and rupture.The follow-up control included conventional X-ray, range of motion(ROM), grip strength, and the disabilities of the arm, shoulder and hand index(DASH), as well as the patient-rated wrist evaluation(PRWE) score for functional outcome at 6 and 12 months. Results: Thirty-three patients(34 sides) were followed up for at least 12 months.The would healed well in all cases 2 weeks postoperatively, and no soft tissue infections, necrosis or neurovascular complications occurred.All the fractures of 38 cases(39 sides)healed averaged 3.6 months(ranging from 2.5-5.7 months), and no loss of reduction occurred postoperatively.Anatomic reconstruction with a step or gap of <1 mm was achieved in 37 cases(38 sides), Whereas 5 patients were lost to follow-up at 12 months postoperatively.ROM and grip strength were all recovered to over 85% of the unaffected side(exception of the bilateral patient). Median DASH-index and PRWE were 6.5(0-17) and 9.3(0-20)respectively. Conclusion: Combined volar and dorsal approaches allow achieving anatomic reconstruction in complex four part intra-articular distal radius fractures and reveal good functional outcomes at intermediate follow-up.

[Wear intensity and surface roughness of microhybrid composite and ceramic occlusal veneers on premolars after the thermocycling and cyclic mechanical loading tests]

OBJECTIVE

To evaluate the wear intensity and surface roughness of occlusal veneers on premolars made of microhybrid composite resin or two kinds of ceramics in vitro after the thermocycling and cyclic mechanical loading tests.

METHODS

In the study,24 fresh extracted human premolars without root canal treatment were prepared (cusps reduction of 1.5 mm in thickness to simulate middle to severe tooth wear, the inclinations of cusps were 20°). The prepared teeth were restored with occlusal veneers made of three different materials: microhybrid composite, heat-pressed lithium disilicate ceramic and computer-aided design/computer-aided manufacturing (CAD/CAM) lithium disilicate ceramic in the thickness of 1.5 mm. The occlusal veneers were cemented with resin cement. The specimens were fatigued using the thermocycling and cyclic mechanical loading tests after being stored in water for 72 h. The wear of specimens was measured using gypsum replicas and 3D laser scanner before and after the thermocycling and cyclic mechanical loading tests and the mean lost distance (mm) was used to indicate the level of wear. The surfaces of occlusal contact area were observed and the surface roughness was recorded using 3D laser scanning confocal microscope before and after the fatigue test. Differences between the groups were compared using ONE-way ANOVA(P<0.05).

RESULTS

All the specimens successfully survived after the thermocycling and cyclic mechanical loading tests. The mean wear of microhybrid composite group, heat-pressed lithium disilicate ceramic group, and CAD/CAM lithium disilicate ceramic group was (-0.13±0.03) mm, (-0.05±0.01) mm and (-0.05±0.01) mm, the wear of microhybrid composite was significantly higher than the two ceramic groups(P<0.001).The mean surface roughness(Ra)before the fatigue test was(1.24±0.20) μm, (0.75±0.09) μm, (0.73±0.14) μm and it became (1.81±0.24) μm, (1.53±0.26) μm and (1.77±0.23) μm after the test . Before the fatigue test, the surface roughness of microhybrid composite was significantly higher than the two ceramic groups(P<0.001) and after the test, the surface roughness of heat-pressed lithium disilicate ceramic was significantly lower than microhybrid composite(P=0.005) and CAD/CAM lithium disilicate ceramic (P=0.010).

CONCLUSION

From the view of wear speed, microhybrid composite was significantly higher than the two kinds of ceramics, but it was similar to enamel when the opposing tooth was natural. The surface roughness before the themocycling and cyclic mechanical loading test of microhybrid composite was significantly higher than that of the two ceramic groups. After the test, the surface roughness of heat-pressed ceramic was significantly lower than that of the other two groups. From the view of surface roughness, heat-pressed ceramic has more advantage.

[Influence of intraoral scan and dental cast scan on occlusal quantitative analysis of virtual dental model]

OBJECTIVE

To make more accurate occlusal quantitative analysis of three-dimensional (3D) virtual dental models and to compare the occlusal contact obtained by intraoral and dental cast scan.

METHODS

In this study, 5 subjects were intraoral scanned using laser scanner (3 shapes, Germany) to obtain the 3D virtual models of one tooth (the first molar), two teeth (the second premolar and the first molar), three teeth (the premolars and the first molar) and their opposite teeth, respectively. The silicone impressions were made and dental stone models were poured for each of them. The dental casts were scanned and then they were fixed to the maximum intercuspal position with a special locating jig for a rescanning of occlusal position. The virtual models taken intraorally and obtained with dental cast scan were introduced to a 3D quantitative analysis system, and some criteria regarding to occlusal contact were calculated and analyzed. The occlusal criteria were mean values of occlusal clearance space between the upper and lower occlusal surface (clearance), occlusal contact area (area), and cusp inclination (angle) of the mandibular first molar. Paired t tests were used to evaluate differences of occlusal criteria between the virtual models obtained with the intraoral scan and dental cast scan (α=0.05).

RESULTS

The mean values of occlusal clearance of one to three teeth obtained by way of intraoral scan were smaller than those obtained by way of cast scan by 0.134 mm, 0.177 mm, and 0.207 mm, respectively. While the occlusal contact areas were greater than the cast scan by 8.65 mm², 10.28 mm², and 11.46 mm². No statistically significant differences were found between the cusps inclinations obtained with the two scanning methods, and the interclass correlations were high.

CONCLUSION

Occlusal clearance obtained by intraoral scan was less than that by cast scan while the occlusal contact area was greater than the latter, indicating that intraoral occlusal contact was closer. The difference of the standard deviations of occlusal clearance measured by the two methods were small and that of occlusal contact area was influenced by the number of teeth scanned intraorally. There was no statistical difference in cusp inclination between the two methods.

Auditory verbal hallucinations are related to cortical thinning in the left middle temporal gyrus of patients with schizophrenia

BACKGROUND

Auditory verbal hallucinations (AVHs) are one of the most common and severe symptoms of schizophrenia, but the neuroanatomical abnormalities underlying AVHs are not well understood. The present study aims to investigate whether AVHs are associated with cortical thinning.

METHODS

Participants were schizophrenia patients from four centers across China, 115 with AVHs and 93 without AVHs, as well as 261 healthy controls. All received 3 T T1-weighted brain scans, and whole brain vertex-wise cortical thickness was compared across groups. Correlations between AVH severity and cortical thickness were also determined.

RESULTS

The left middle part of the middle temporal gyrus (MTG) was significantly thinner in schizophrenia patients with AVHs than in patients without AVHs and healthy controls. Inferences were made using a false discovery rate approach with a threshold at p < 0.05. Left MTG thickness did not differ between patients without AVHs and controls. These results were replicated by a meta-analysis showing them to be consistent across the four centers. Cortical thickness of the left MTG was also found to be inversely correlated with hallucination severity across all schizophrenia patients.

CONCLUSION

The results of this multi-center study suggest that an abnormally thin left MTG could be involved in the pathogenesis of AVHs in schizophrenia.

[Understanding new progress in prosthodontics from the perspective of updates in the glossary of prosthodontic terms]

Glossary of Prosthodontic Terms is a standardized vocabulary with international influence. Its ninth edition was published in J Prosthet Dent in 2017, 12 years after the last edition. During this period, great development has taken place in the dental prosthetics due to dental implant and digital dentistry as well as application of new materials and technologies. The research results of dental adhesion, aesthetic dentistry, orofacial function, and tissue regeneration has been fully applied in dental clinic. This paper attempts to capture and accurately understand the changes of some important, especially controversial academic concepts through the comparison of the seventh, eighth and ninth edition of vocabulary. Four parts including new terms, obsolete terms, terms with updated concept, and terms with the continuity of concept are used to show the important progress of prosthodontics.

New Insights into Effects of Aromatic Amino Acids on Hydroxyapatite

Biomimetics inspired by superstructures and extraordinary properties of teeth have resulted in tooth repair and the generation of novel materials. However, little attention has been paid to tooth color, whose origin remains unknown. Based on recent studies, fluorophores-mainly aromatic amino acids (AAAs) in proteins-might be responsible for tooth color. We synthesized carbonated hydroxyapatite (HA; the mineral phase of teeth) in the presence of different amino acids (AAs; the basic units of protein matrix of teeth) as a simplified model of teeth to explore the color source at the AA level. After measuring the fluorescence and color characteristics of HA-AAs before and after bleaching treatment, we found that only HA, synthesized in the presence of AAAs, exhibited remarkable fluorescence and color property. Furthermore, linearly increased fluorescence intensity and deeper color were observed with an increase in AAA content in HA-AAAs. Similarly, significantly decreased absorbance of HA-AAAs between 250 and 300 nm in ultraviolet spectra, declined fluorescence intensity, and decolored performance of HA-AAAs were observed after bleaching treatment. The results showed that AAAs contributed to the fluorescence and color properties of HA and that hydrogen peroxide might whiten HA-AAAs by oxidizing the benzene ring in AAAs. These findings are of great significance in promoting the synthesis of advanced tooth-colored materials and furthering our understanding of the possible mechanisms of hydrogen peroxide. Moreover, our study shed light on the importance of AAAs and might provide new ideas for investigations of biomineralization and biomimetics.

Adsorption of Pb and Zn from binary metal solutions and in the presence of dissolved organic carbon by DTPA-functionalised, silica-coated magnetic nanoparticles

The ability of diethylenetriaminepentaacetic acid (DTPA)-functionalised, silica-coated magnetic nanoparticles to adsorb Pb and Zn from single and bi-metallic metal solutions and from solutions containing dissolved organic carbon was assessed. In all experiments 10 mL solutions containing 10 mg of nanoparticles were used. For single metal solutions (10 mg L^-1 Pb or Zn) at pH 2 to 8, extraction efficiencies were typically >70%. In bi-metallic experiments, examining the effect of a background of either Zn or Pb (0.025 mmol L^-1) on the adsorption of variable concentrations (0-0.045 mmol L^-1) of the other metal (Pb or Zn, respectively) adsorption was well modelled by linear isotherms (R² > 0.60; p ≤ 0.001) and Pb was preferentially adsorbed relative to Zn. In dissolved organic carbon experiments, the presence of fulvic acid (0, 2.1 and 21 mg DOC L^-1) reduced Pb and Zn adsorption from 0.01, 0.1 and 1.0 mmol L^-1 solutions. However, even at 21 mg DOC L^-1 fulvic acid, extraction efficiencies from 0.01 to 0.1 mmol L^-1 solutions remained >80% (Pb) and >50% (Zn). Decreases in extraction efficiency were significant between initial metal concentrations of 0.1 and 1.0 mmol L^-1 indicating that at metal loadings between c. 100 mg kg^-1 and 300 mg kg^-1 occupancy of adsorption sites began to limit further adsorption. The nanoparticles have the potential to perform effectively as metal adsorbents in systems containing more than one metal and dissolved organic carbon at a range of pH values.