101
|
Liang X, Ning Y, Lan L, Yang G, Li M, Tang S, Huang J. Electrochemical Performance of a PVDF-HFP-LiClO 4-Li 6.4La 3.0Zr 1.4Ta 0.6O 12 Composite Solid Electrolyte at Different Temperatures. NANOMATERIALS (BASEL, SWITZERLAND) 2022; 12:3390. [PMID: 36234518 PMCID: PMC9565333 DOI: 10.3390/nano12193390] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 08/31/2022] [Revised: 09/24/2022] [Accepted: 09/26/2022] [Indexed: 06/16/2023]
Abstract
The stability and wide temperature performance range of solid electrolytes are the keys to the development of high-energy density all-solid-state lithium-ion batteries. In this work, a PVDF-HFP-LiClO4-Li6.4La3Zr1.4Ta0.6O12 (LLZTO) composite solid electrolyte was prepared using the solution pouring method. The PVDF-HFP-LiClO4-LLZTO composite solid electrolyte shows excellent electrochemical performance in the temperature range of 30 to 60 °C. By assembling this electrolyte into the battery, the LiFePO4/PVDF-HFP-LiClO4-LLZTO/Li battery shows outstanding electrochemical performance in the temperature range of 30 to 60 °C. The ionic conductivity of the composite electrolyte membrane at 30 °C and 60 °C is 5.5 × 10-5 S cm-1 and 1.0 × 10-5 S cm-1, respectively. At a current density of 0.2 C, the LiFePO4/PVDF-HFP-LiClO4-LLZTO/Li battery shows a high initial specific discharge capacity of 133.3 and 167.2 mAh g-1 at 30 °C and 60 °C, respectively. After 50 cycles, the reversible electrochemical capacity of the battery is 121.5 and 154.6 mAh g-1 at 30 °C and 60 °C; the corresponding capacity retention rates are 91.2% and 92.5%, respectively. Therefore, this work provides an effective strategy for the design and preparation of solid-state lithium-ion batteries.
Collapse
|
102
|
Yang S, Guo X, Lv H, Han C, Chen A, Tang Z, Li X, Zhi C, Li H. Rechargeable Iodine Batteries: Fundamentals, Advances, and Perspectives. ACS NANO 2022; 16:13554-13572. [PMID: 36001394 DOI: 10.1021/acsnano.2c06220] [Citation(s) in RCA: 12] [Impact Index Per Article: 6.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/15/2023]
Abstract
Lattice distortion and structure collapse are two intrinsic issues of intercalative-type electrodes derived from repeated ion shuttling. In contrast, rechargeable iodine batteries (RIBs) based on the conversion reaction of iodine stand out for high reversibility and satisfying voltage output characteristics no matter when dealing with both monovalent and multivalent ions. Foreseeable performance superiorities lead to an influx of considerable focus and thus a renaissance in RIBs. This review provides a comprehensive overview of the fundamental chemistry of RIBs from the perspectives of physicochemical properties, conversion mechanism, and existing issues. Furthermore, we refine the optimization strategies for high-performance RIBs, focusing on physical adsorption and chemical interaction strengthening, electrolytes regulation, and nanoscale-iodine design. Then the pros and cons of tremendous RIBs are compared and specified. Ultimately, we conclude with remaining challenges and perspectives to our best knowledge, which may inspire the construction of next-generation RIBs.
Collapse
|
103
|
Tratnik B, Van de Velde N, Jerman I, Kapun G, Tchernychova E, Tomšič M, Jamnik A, Genorio B, Vizintin A, Dominko R. Correlating Structural Properties with Electrochemical Behavior of Non-graphitizable Carbons in Na-Ion Batteries. ACS APPLIED ENERGY MATERIALS 2022; 5:10667-10679. [PMID: 36185811 PMCID: PMC9516555 DOI: 10.1021/acsaem.2c01390] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 05/06/2022] [Accepted: 08/11/2022] [Indexed: 06/16/2023]
Abstract
We report on a detailed structural versus electrochemical property investigation of the corncob-derived non-graphitizable carbons prepared at different carbonization temperatures using a combination of structural characterization methodology unique to this field. Non-graphitizable carbons are currently the most viable option for the negative electrode in sodium-ion batteries. However, many challenges arise from the strong dependence of the precursor's choice and carbonization parameters on the evolution of the carbon matrix and its resulting electrochemistry. We followed structure development upon the increase in carbonization temperature with thorough structural characterization and electrochemical testing. With the increase of carbonization temperature from 900 to 1600 °C, our prepared materials exhibited a trend toward increasing structural order, an increase in the specific surface area of micropores, the development of ultramicroporosity, and an increase in conductivity. This was clearly demonstrated by a synergy of small- and wide-angle X-ray scattering, scanning transmission electron microscopy, and electron-energy loss spectroscopy techniques. Three-electrode full cell measurements confirmed incomplete desodiation of Na+ ions from the non-graphitizable carbons in the first cycle due to the formation of a solid-electrolyte interface and Na trapping in the pores, followed by a stable second cycle. The study of cycling stability over 100 cycles in a half-cell configuration confirmed the observed high irreversible capacity in the first cycle, which stabilized to a slow decrease afterward, with the Coulombic efficiency reaching 99% after 30 cycles and then stabilizing between 99.3 and 99.5%. Subsequently, a strong correlation between the determined structural properties and the electrochemical behavior was established.
Collapse
|
104
|
Petrov M, Chikin D, Abunaeva L, Glazkov A, Pichugov R, Vinyukov A, Levina I, Motyakin M, Mezhuev Y, Konev D, Antipov A. Mixture of Anthraquinone Sulfo-Derivatives as an Inexpensive Organic Flow Battery Negolyte: Optimization of Battery Cell. MEMBRANES 2022; 12:912. [PMID: 36295671 PMCID: PMC9607404 DOI: 10.3390/membranes12100912] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 08/25/2022] [Revised: 09/15/2022] [Accepted: 09/15/2022] [Indexed: 06/16/2023]
Abstract
Anthraquinone-2,7-disulfonic acid (2,7-AQDS) is a promising organic compound, which is considered as a negolyte for redox flow batteries as well as for other applications. In this work we carried out a well-known reaction of anthraquinone sulfonation to synthesize 2,7-AQDS in mixture with other sulfo-derivatives, namely 2,6-AQDS and 2-AQS. Redox behavior of this mixture was evaluated with cyclic voltammetry and was almost identical to 2,7-AQDS. Mixture was then assessed as a potential negolyte of anthraquinone-bromine redox flow battery. After adjusting membrane-electrode assembly composition (membrane material and flow field)), the cell demonstrated peak power density of 335 mW cm-2 (at SOC 90%) and capacity utilization, capacity retention and energy efficiency of 87.9, 99.6 and 64.2%, respectively. These values are almost identical or even higher than similar values for flow battery with 2,7-AQDS as a negolyte, while the price of mixture is significantly lower. Therefore, this work unveils the promising possibility of using a mixture of crude sulfonated anthraquinone derivatives mixture as an inexpensive negolyte of RFB.
Collapse
|
105
|
Liang X, Huang D, Lan L, Yang G, Huang J. Enhancement of the Electrochemical Performances of Composite Solid-State Electrolytes by Doping with Graphene. NANOMATERIALS (BASEL, SWITZERLAND) 2022; 12:3216. [PMID: 36145004 PMCID: PMC9501592 DOI: 10.3390/nano12183216] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 08/22/2022] [Revised: 09/11/2022] [Accepted: 09/13/2022] [Indexed: 06/16/2023]
Abstract
With high safety and good flexibility, polymer-based composite solid electrolytes are considered to be promising electrolytes and are widely investigated in solid lithium batteries. However, the low conductivity and high interfacial impedance of polymer-based solid electrolytes hinder their industrial applications. Herein, a composite solid-state electrolyte containing graphene (PVDF-LATP-LiClO4-Graphene) with structurally stable and good electrochemical performance is explored and enables excellent electrochemical properties for lithium-ion batteries. The ionic conductivity of the composite electrolyte membrane containing 5 wt% graphene reaches 2.00 × 10-3 S cm-1 at 25 °C, which is higher than that of the composite electrolyte membrane without graphene (2.67 × 10-4 S cm-1). The electrochemical window of the composite electrolyte membrane containing 5 wt% graphene reaches 4.6 V, and its Li+ transference numbers reach 0.84. Assembling this electrolyte into the battery, the LFP/PVDF-LATP-LiClO4-Graphene /Li battery has a specific discharge capacity of 107 mAh g-1 at 0.2 C, and the capacity retention rate was 91.58% after 100 cycles, higher than that of the LiFePO4/PVDF-LATP-LiClO4/Li (LFP/PLL/Li) battery, being 94 mAh g-1 and 89.36%, respectively. This work provides a feasible solution for the potential application of composite solid electrolytes.
Collapse
|
106
|
He S, Zhang L, Cai J, Wu X, Sun H, Du T. Synthesis and Evaluation of LaBaCo 2-xMo xO 5+δ Cathode for Intermediate-Temperature Solid Oxide Fuel Cells. MATERIALS (BASEL, SWITZERLAND) 2022; 15:5858. [PMID: 36079242 PMCID: PMC9456714 DOI: 10.3390/ma15175858] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 07/26/2022] [Revised: 08/21/2022] [Accepted: 08/23/2022] [Indexed: 06/15/2023]
Abstract
LaBaCo2-xMoxO5+δ (LBCMx, x = 0-0.08) cathodes synthesized by a sol-gel method were evaluated for intermediate-temperature solid oxide fuel cells. The limit of the solid solubility of Mo in LBCMx was lower than 0.08. As the content of Mo increased gradually from 0 to 0.06, the thermal expansion coefficient decreased from 20.87 × 10-6 K-1 to 18.47 × 10-6 K-1. The introduction of Mo could increase the conductivity of LBCMx, which varied from 464 S cm-1 to 621 S cm-1 at 800 °C. The polarization resistance of the optimal cathode LBCM0.04 in air at 800 °C was 0.036 Ω cm2, reduced by a factor of 1.67 when compared with the undoped Mo cathode. The corresponding maximum power density of a single cell based on a YSZ electrolyte improved from 165 mW cm-2 to 248 mW cm-2 at 800 °C.
Collapse
|
107
|
Li P, Yang C, Wu C, Wei Y, Jiang B, Jin Y, Wu W. Bio-Based Carbon Materials for High-Performance Supercapacitors. NANOMATERIALS (BASEL, SWITZERLAND) 2022; 12:nano12172931. [PMID: 36079969 PMCID: PMC9457592 DOI: 10.3390/nano12172931] [Citation(s) in RCA: 7] [Impact Index Per Article: 3.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/20/2022] [Revised: 08/21/2022] [Accepted: 08/22/2022] [Indexed: 05/20/2023]
Abstract
Lignin, one of the components of natural plant biomass, is a rich source of carbon and has excellent potential as a valuable, sustainable source of carbon material. Low-cost lignosulfonate (LS) doped with polyaniline (PANI) has been used as a precursor to produce porous carbon. LS has a highly dispersed and sparse microstructure and can be accidentally doped with S atoms. N and S double-doped carbon can be directly synthesized with abundant mesopores and high surface area in a lamellar network using PANI as another doping source. This study explored the optimal conditions of LS/PANI material with different amounts of lignosulfonate and different carbonization temperatures. When the amount of lignosulfonate was 4 g and the carbonization temperature was 700 °C, graded porous carbon was obtained, and the electrochemical performance was the best. At 0.5 A/g, the specific capacitance reached 333.50 F/g (three-electrode system) and 242.20 F/g (two-electrode system). After 5000 charge/discharge cycles at 5 A/g, the material maintained good cycling stability and achieved a capacitance retention rate of 95.14% (three-electrode system) and 97.04% (two-electrode system). The energy and power densities of the SNC700 samples were 8.33 Wh/kg and 62.5 W/kg at 0.25 A/g, respectively, values that meet the requirements of today's commercially available supercapacitor electrode materials, further demonstrating their good practicality. This paper provides an efficient double-doping method to prepare layered structures. Porous carbon is used for electrochemical energy storage devices.
Collapse
|
108
|
Xue Z, Lu J. Fabrication and application of Fe 2O 3-decorated carbon nanotube fibers via instantaneous Joule-heating method. NANOTECHNOLOGY 2022; 33:455601. [PMID: 35896090 DOI: 10.1088/1361-6528/ac8486] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/05/2022] [Accepted: 07/26/2022] [Indexed: 06/15/2023]
Abstract
Fe2O3-decorated carbon nanotube fibers (Fe2O3/CNT fibers) exhibit synergistic properties and can be used in flexible electrochemical devices. One of the greatest challenges is to synthesize homogeneous Fe2O3on CNT fibers. In this paper, we have anchored Fe2O3nanocrystals compactly and uniformly in CNT fibers via the instantaneous Joule-heating method. By regulating the current intensity, iron catalysts in CNT fibers can be directly converted into Fe2O3nanocrystals. This method can also prepare Fe2O3particles of different sizes by adjusting the current value. The distinct structure of Fe2O3/CNT fibers contributed to their excellent electrochemical performance. Because cobaltocene and nickelocene can also be used as catalysts to prepare CNT fibers, this method is expected to be a universal method for the composite of transition metal oxide and CNT fibers.
Collapse
|
109
|
Naik KG, Vishnugopi BS, Mukherjee PP. Kinetics or Transport: Whither Goes the Solid-State Battery Cathode? ACS APPLIED MATERIALS & INTERFACES 2022; 14:29754-29765. [PMID: 35732069 DOI: 10.1021/acsami.2c04962] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/15/2023]
Abstract
Solid-state batteries (SSBs) hold the potential to enhance the energy density, power density, and safety of conventional lithium-ion batteries. The theoretical promise of SSBs is predicated on the mechanistic design and comprehensive analysis of various solid-solid interfaces and microstructural features within the system. The spatial arrangement and composition of constituent phases (e.g., active material, solid electrolyte, binder) in the solid-state cathode dictate critical characteristics such as solid-solid point contacts or singularities within the microstructure and percolation pathways for ionic/electronic transport. In this work, we present a comprehensive mesoscale discourse to interrogate the underlying microstructure-coupled kinetic-transport interplay and concomitant modes of resistances that evolve during electrochemical operation of SSBs. Based on a hierarchical physics-based analysis, the mechanistic implications of solid-solid point contact distribution and intrinsic transport pathways on the kinetic heterogeneity is established. Toward designing high-energy-density SSB systems, the fundamental correlation between active material loading, electrode thickness and electrochemical response has been delineated. We examine the paradigm of carbon-binder free cathodes and identify design criteria that can facilitate enhanced performance with such electrode configurations. A mechanistic design map highlighting the dichotomy in kinetic and ionic/electronic transport limitations that manifest at various SSB cathode microstructural regimes is established.
Collapse
|
110
|
Xu Y, Xia Y, Xue H, Gong H, Chang K, He J, Wang T, Ma R. Aprotic Lithium-Carbon Dioxide Batteries: Reaction Mechanism and Catalyst Design. CHEM REC 2022; 22:e202200109. [PMID: 35785427 DOI: 10.1002/tcr.202200109] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/28/2022] [Revised: 06/12/2022] [Indexed: 11/08/2022]
Abstract
In recent years, the combustion of fossil fuels leads to the release of a large amount of CO2 gas, which induces the greenhouse effect and the energy crisis. To solve these problems, researchers have turned their focus to a novel Li-CO2 battery (LCB). LCB has received much attention because of its high theoretical energy density and reversible CO2 reduction/evolution process. So far, the emerging LCB still faces many challenges derived from the slow reaction kinetics of discharge products. In this review, the latest status and progress of LCB, especially the influence of the structure design of cathode catalysts on the battery performance, are systematically elaborated. This review summarizes in detail the existing issues and possible solutions of LCB, which is of high research value for further promoting the development of Li-Air battery.
Collapse
|
111
|
Luo Y, Que W, Bin X, Xia C, Kong B, Gao B, Kong LB. Flexible MXene-Based Composite Films: Synthesis, Modification, and Applications as Electrodes of Supercapacitors. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2022; 18:e2201290. [PMID: 35670492 DOI: 10.1002/smll.202201290] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/28/2022] [Revised: 05/18/2022] [Indexed: 06/15/2023]
Abstract
MXenes, as a 2D planar structure nanomaterial, were first reported in 2011. Due to their large specific surface area, high ductility, high electrical conductivity, strong hydrophilic surface, and high mechanical flexibility, MXenes have been extensively explored in the development of various functional materials with desired performances. This review is aimed to summarize the current progress in synthesis, modification, and applications of MXene-based composite films as electrode materials of flexible energy storage devices. In the synthesis of MXenes, the evolution and exploration of etchants are emphasized. Furthermore, in order to develop MXene-based composite films, the components used to modify the MXene nanoflakes, including 0D, 1D, and 2D nanomaterials, are summarized, and the perspectives and research direction of such materials are also discussed.
Collapse
|
112
|
Bheemireddy SR, Li Z, Zhang J, Agarwal G, Robertson LA, Shkrob IA, Assary RS, Zhang Z, Wei X, Cheng L, Zhang L. Fluorination Enables Simultaneous Improvements of a Dialkoxybenzene-Based Redoxmer for Nonaqueous Redox Flow Batteries. ACS APPLIED MATERIALS & INTERFACES 2022; 14:28834-28841. [PMID: 35709493 DOI: 10.1021/acsami.2c04926] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/15/2023]
Abstract
Redoxmers or redox-active organic materials, are one critical component for nonaqueous redox flow batteries (RFBs), which hold high promise in enabling the time domain of the grid. While tuning redox potentials of redoxmers is a very effective way to enhance energy densities of NRFBs, those improvements often accompany accelerated kinetics of the charged species, undermining stability and cycling performance. Herein, a strategy for designing redoxmers with simultaneous improvements in redox potential and stability is proposed. Specifically, the redoxmer 1,4-di-tert-butyl-2,5-bis(2,2,2-trifluoroethoxy)benzene (ANL-C46) is developed by incorporating fluorinated substitutions into the dialkoxybenzene-based platform. Compared to the non-fluorinated analogue, ANL-C46 demonstrates not only an increased (∼0.41 V) redox potential but also much enhanced stability (1.6 times) and cyclability (4 times) evidenced by electron paramagnetic resonance kinetic study, H-cell and flow cell cycling. In fact, the cycling performance of ANL-C46 is among the best of high potential (>1.0 V vs Ag/Ag+) redoxmers ever reported. Density functional theory calculations suggest that while the introduced fluorine substitutions elevate the redox potentials, they also help to depress the decomposition reactions of the charged redoxmers, affording excellent stability. The findings represent an interesting strategy for simultaneously improving energy density and stability, which could further prompt the development of high-performance redoxmers.
Collapse
|
113
|
Voltammetric Detection of Glucose-The Electrochemical Behavior of the Copper Oxide Materials with Well-Defined Facets. SENSORS 2022; 22:s22134783. [PMID: 35808280 PMCID: PMC9269370 DOI: 10.3390/s22134783] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 05/04/2022] [Revised: 06/21/2022] [Accepted: 06/22/2022] [Indexed: 02/04/2023]
Abstract
Cu2O nanomaterials with well-defined facets and uniform size were synthesized by a wet-chemical method. Regardless of the additive composition, powders crystallize mostly in cuprite form. To compare their electrochemical behavior, the obtained materials were deposited on carbon glassy electrodes. The response to glucose from the materials with different exposed facets was recorded with a delay at the anodic curve. The chronoamperometric analyses (AMP) exhibited a lower signal in contrast to the cyclic voltammetry data (CV), indicating that the number of active sites involved in glucose oxidation processes resulting from the structure of the material is insufficient. For samples with dominant (100) or (111) planes, a typical characteristic was observed, however, with an additional peak at the anodic curve. The location of the peaks is approximately the same and no significant differences from the AMP and CV analysis were observed. The sample enclosed by the (111) facets exhibited higher activity; however, as a result of the redox reaction with glucose molecules, the surface state is changing. Cu2O materials enclosed by (100) planes exhibited optimal sensitivity as well as a large detective range. Samples with differential facet exposition present various current-potential profiles, as the effect of binder-particle interaction with Nafion.
Collapse
|
114
|
Gu Y, Ru Pei Y, Zhao M, Cheng Yang C, Jiang Q. Sn-, Sb- and Bi-Based Anodes for Potassium Ion Battery. CHEM REC 2022; 22:e202200098. [PMID: 35686885 DOI: 10.1002/tcr.202200098] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/21/2022] [Revised: 05/24/2022] [Indexed: 01/20/2023]
Abstract
Owing to the abundant resources of potassium resources, potassium ion batteries (PIBs) hold great potential in various energy storage devices. However, the poor lifespan of PIBs anodes limit their merchant applications. The exploitation of anode materials with high performance is one of the critical factors to the development of PIBs. Metallic Sn-, Sb-, and Bi-based materials, show promising future thanks to their high theoretical capacities and safe working voltage. However, the rapid capacity decay caused by the large K+ is still a pivotal challenge. In this review, recent progresses on alloying anodes were summarized. Schemes, such as ultra-small nanoparticles, hetero-element doping, and electrolyte optimization are effective strategies to improve their electrochemical properties. This review provides an outlook on the nanostructures and their synthesis methods for the alloying-type materials, and will stimulate their intensive study for practical application in the near future.
Collapse
|
115
|
Xie Q, Lou F, Luo X, Hao H, Wang M, Wang G, Chen J, Xie Y, Wang G. Enhanced Electrochemical Performance and Safety of LiNi 0.88Co 0.1Al 0.02O 2 by a Negative Thermal Expansion Material of Orthorhombic Al 2(WO 4) 3. ACS APPLIED MATERIALS & INTERFACES 2022; 14:26882-26894. [PMID: 35654441 DOI: 10.1021/acsami.2c00356] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/15/2023]
Abstract
LiNi0.88Co0.1Al0.02O2 (NCA) is attractive for high-energy batteries, but phase transition and side reactions leave large volume change and thermal runaway. In order to address the drawbacks, orthorhombic Al2(WO4)3, a cheap anisotropic negative thermal expansion material, was synthesized and adopted to modify NCA, and its effects on the electrochemical performance and safety of NCA were investigated using multifarious techniques. Al2(WO4)3 can greatly improve the rate performance, cyclability at different temperatures, thermal stability, and interface behavior and intensify charge transfer as well as decline the deformation and side reactions of NCA. The discharge capacity of the NCA modified with 5 wt % Al2(WO4)3 reaches 170.0 mA h/g at 5.0 C and 25 °C. After 100 cycles, the values of this electrode at 1.0 C and 25 °C and at 3.0 C and 60 °C are 164.2 and 148.7 mA h/g, respectively, much higher than those of the pure NCA under the same conditions. Moreover, Al2(WO4)3 declines the byproducts and cation mixing and decreases the released heat, strain, and charge-transfer resistance after cycles of NCA about 37.1, 33.0, and 32.8%, respectively. The improvement mechanism is discussed. It opens an effective avenue for the applications of energy materials by simultaneously adjusting heat, structure, interface, and deformation.
Collapse
|
116
|
Dai Z, Wang J, Zhao H, Bai Y. Surface Coupling between Mechanical and Electric Fields Empowering Ni-Rich Cathodes with Superior Cyclabilities for Lithium-Ion Batteries. ADVANCED SCIENCE (WEINHEIM, BADEN-WURTTEMBERG, GERMANY) 2022; 9:e2200622. [PMID: 35478438 PMCID: PMC9218785 DOI: 10.1002/advs.202200622] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/01/2022] [Revised: 04/01/2022] [Indexed: 05/16/2023]
Abstract
Ni-rich cathodes with high energy densities are considered as promising candidates for advanced lithium-ion batteries, whereas their commercial application is in dilemma due to dramatic capacity decay and poor structure stability stemmed from interfacial instability, structural degradation, and stress-strain accumulation, as well as intergranular cracks. Herein, a piezoelectric LiTaO3 (LTO) layer is facilely deposited onto Li[Nix Coy Mn1- x - y ]O2 (x = 0.6, 0.8) cathodes to induce surface polarized electric fields via the intrinsic stress-strain of Ni-rich active materials, thus modulating interfacial Li+ kinetics upon cycling. Various characterizations indicate that the electrochemical performances of LTO-modified cathodes are obviously enhanced even under large current density and elevated temperature. Intensive explorations from in situ X-ray diffraction technique, finite element analysis, and first-principle calculation manifest that the improvement mechanism of LTO decoration can be attributed to the enhanced structural stability of bulk material, suppressed stress accumulation, and regulated ion transportation. These findings provide deep insight into surface coupling strategy between mechanical and electric fields to regulate the interfacial Li+ kinetics behavior and enhance structure stability for Ni-rich cathodes, which will also arouse great interest from scientists and engineers in multifunctional surface engineering for electrochemical systems.
Collapse
|
117
|
Hu Z, Zhang R, Fan C, Liu X, Gao P, Zhang W, Liu Z, Han S, Liu J, Liu J. Synergistic Effect, Structural and Morphology Evolution, and Doping Mechanism of Spherical Br-Doped Na 3 V 2 (PO 4 ) 2 F 3 /C toward Enhanced Sodium Storage. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2022; 18:e2201719. [PMID: 35506200 DOI: 10.1002/smll.202201719] [Citation(s) in RCA: 7] [Impact Index Per Article: 3.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/18/2022] [Revised: 04/17/2022] [Indexed: 06/14/2023]
Abstract
Na3 V2 (PO4 )2 F3 has attracted wide attention due to its high voltage platform, and stable crystal structure. However, its application is limited by the low electronic conductivity and the ease formation of impurity. In this paper, the spherical Br-doped Na3 V2 (PO4 )2 F3 /C is successfully obtained by a one-step spray drying technology. The hard template polytetrafluoroethylene (PTFE) supplements the loss of fluorine, forming porous structure that accelerates the infiltration of electrolyte. The soft template cetyltrimethylammonium bromide (CTAB) enables doping of bromine and can also control the fluorine content, meanwhile, the self-assembly effect strengthens the structure and refines the size of spherical particles. The loss, compensation, and regulation mechanism of fluorine are investigated. The Br-doped Na3 V2 (PO4 )2 F3 /C sphere exhibits superior rate capability with the capacities of 116.1, 105.1, and 95.2 mAh g-1 at 1, 10, and 30 C, and excellent cyclic performance with 98.3% capacity retention after 1000 cycles at 10 C. The density functional theory (DFT) calculation shows weakened charge localization and enhanced conductivity, meanwhile the diffusion energy barrier of sodium ions is reduced with Br doping. This paper proposes a strategy to construct fluorine-containing polyanions cathode, which enables the precise regulation of structure and morphology, thus leading to superior electrochemical performance.
Collapse
|
118
|
Song Y, Wang Y, Shao J, Ye K, Wang Q, Wang G. Boosting CO 2 Electroreduction via Construction of a Stable ZnS/ZnO Interface. ACS APPLIED MATERIALS & INTERFACES 2022; 14:20368-20374. [PMID: 34636530 DOI: 10.1021/acsami.1c15669] [Citation(s) in RCA: 4] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/13/2023]
Abstract
Carbon dioxide (CO2) electroreduction can offer a way of relieving environmental and energy issues. Gold and silver catalysts show considerable electrochemical performance for CO production; however, the electrochemical CO2 conversion to CO is still restricted by the Faradaic efficiency, current density, and stability over the catalysts. Non-noble metal (zinc) is considered as a promising catalyst for CO2 electroreduction because of its low cost. However, because of the electron-rich property of zinc, it has a weak adsorption capacity of intermediates, resulting in a poor CO2 electroreduction performance. In this work, ZnS nanoparticles are embedded onto the ZnO surface to construct a stable ZnS/ZnO interface structure. The ZnS/ZnO interface reaches a maximum current density of 327.2 ± 10.6 mA cm-2 with a CO Faradaic efficiency of 91.9 ± 0.6% at -0.73 V vs a reversible hydrogen electrode (RHE) and remains stable for 40 h at a current density of 115.7 ± 7.0 mA cm-2 with a CO Faradaic efficiency of 93.8 ± 3.7% at -0.56 V vs RHE.
Collapse
|
119
|
Wang Z, Wang J, Ni J, Li L. Structurally Durable Bimetallic Alloy Anodes Enabled by Compositional Gradients. ADVANCED SCIENCE (WEINHEIM, BADEN-WURTTEMBERG, GERMANY) 2022; 9:e2201209. [PMID: 35362272 PMCID: PMC9165509 DOI: 10.1002/advs.202201209] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/02/2022] [Indexed: 06/14/2023]
Abstract
Metals such as Sb and Bi are important anode materials for sodium-ion batteries because they feature a large capacity and low reaction potential. However, the accumulation of stress and strain upon sodium storage leads to the formation of cracks and fractures, resulting in electrode failure upon extended cycling. In this work, the design and construction of Bix Sb1-x bimetallic alloy films with a compositional gradient to mitigate the intrinsic structural instability is reported. In the gradient film, the top is rich in Sb, contributing to the capacity, while the bottom is rich in Bi, helping to reduce the stress in the interphase between the film and the substrate. Significantly, this gradient film affords a high reversible capacity of ≈500 mAh g-1 and sustains 82% of the initial capacity after 1000 cycles at 2 C, drastically outperforming the solid-solution counterpart and many recently reported alloy anodes. Such a gradient design can open up the possibilities to engineering high-capacity anode materials that are structurally unstable due to the huge volume variation upon energy storage.
Collapse
|
120
|
Yang G, Liu F, Hou N, Peng S, He C, Fang P. Preparation of One-Dimensional Polyaniline Nanotubes as Anticorrosion Coatings. MATERIALS 2022; 15:ma15093192. [PMID: 35591524 PMCID: PMC9104655 DOI: 10.3390/ma15093192] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 12/23/2021] [Revised: 04/20/2022] [Accepted: 04/21/2022] [Indexed: 11/16/2022]
Abstract
Uniform polyaniline (PANI) nanotubes were synthesized by a self-assembly method under relatively dilute hydrochloric acid (HCl) solution. Scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectroscopy, and UV-Vis-NIR spectroscopy were employed to characterize the morphology and molecular structure of the PANI products. SEM images show that the PANI nanotubes have uniform morphology and form compact coating on the substrate surface. For comparison, aggregated PANI was also synthesized by conventional polymerization method. The performance of the PANI products on carbon steel was studied using eletrochemical measurement and immersion corrosion experiment in 3.5 wt% NaCl aqueous solution. The corrosion potentials of carbon steel samples increase by 0.196 V and 0.060 V after coated with PANI nanotubes and aggregated PANI, respectively, and the corrosion currents density decrease by about 76.32% and 36.64%, respectively. The 6-day immersion experiment showed that the carbon steel samples coated by PANI nanotubes showed more excellent anticorrosion performance, because the more compact coating formed by PANI nanotubes may inhibit the corrosion process between the anodic and cathodic.
Collapse
|
121
|
Banbela HM, Alharbi LM, Al-Dahiri RH, Jaremko M, Abdel Salam M. Preparation, Characterization, and Electrochemical Performance of the Hematite/Oxidized Multi-Walled Carbon Nanotubes Nanocomposite. Molecules 2022; 27:molecules27092708. [PMID: 35566063 PMCID: PMC9102378 DOI: 10.3390/molecules27092708] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/20/2022] [Revised: 04/10/2022] [Accepted: 04/19/2022] [Indexed: 11/16/2022] Open
Abstract
In this research work, a hematite (α-Fe2O3) nanoparticle was prepared and then mixed with oxidized multi-walled carbon nanotubes (O-MWCNT) to form a stable suspension of an α-Fe2O3/O-MWCNTs nanocomposite. Different characterization techniques were used to explore the chemical and physical properties of the α-Fe2O3/O-MWCNTs nanocomposite, including XRD, FT-IR, UV-Vis, and SEM. The results revealed the successful formation of the α-Fe2O3 nanoparticles, and the oxidation of the MWCNT, as well as the formation of stable α-Fe2O3/O-MWCNTs nanocomposite. The electrochemical behaviour of the α-Fe2O3/O-MWCNTs nanocomposite was investigated using cyclic voltammetry (CV) and linear sweep voltammetry (LSV), and the results revealed that modification of α-Fe2O3 nanoparticles with O-MWCNTs greatly enhanced electrochemical performance and capacitive behaviour, as well as cycling stability.
Collapse
|
122
|
A Short Overview of Biological Fuel Cells. MEMBRANES 2022; 12:membranes12040427. [PMID: 35448397 PMCID: PMC9031071 DOI: 10.3390/membranes12040427] [Citation(s) in RCA: 7] [Impact Index Per Article: 3.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 02/19/2022] [Revised: 04/08/2022] [Accepted: 04/09/2022] [Indexed: 02/04/2023]
Abstract
This short review summarizes the improvements on biological fuel cells (BioFCs) with or without ionomer separation membrane. After a general introduction about the main challenges of modern energy management, BioFCs are presented including microbial fuel cells (MFCs) and enzymatic fuel cells (EFCs). The benefits of BioFCs include the capability to derive energy from waste-water and organic matter, the possibility to use bacteria or enzymes to replace expensive catalysts such as platinum, the high selectivity of the electrode reactions that allow working with less complicated systems, without the need for high purification, and the lower environmental impact. In comparison with classical FCs and given their lower electrochemical performances, BioFCs have, up to now, only found niche applications with low power needs, but they could become a green solution in the perspective of sustainable development and the circular economy. Ion exchange membranes for utilization in BioFCs are discussed in the final section of the review: they include perfluorinated proton exchange membranes but also aromatic polymers grafted with proton or anion exchange groups.
Collapse
|
123
|
Revisiting the Effect of Pyrolysis Temperature and Type of Activation on the Performance of Carbon Electrodes in an Electrochemical Capacitor. MATERIALS 2022; 15:ma15072431. [PMID: 35407762 PMCID: PMC8999809 DOI: 10.3390/ma15072431] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 03/08/2022] [Revised: 03/21/2022] [Accepted: 03/22/2022] [Indexed: 01/27/2023]
Abstract
Hierarchical porous carbons are known to enhance the electrochemical features of electrodes in electrochemical capacitors. However, the contribution of surface oxygen and the resulting functionalities and wettability, along with the role of electrical conductivity and degree of amorphous or crystalline nature in the micro-mesoporous carbons, are not yet clear. This article considers the effect of carbonisation temperature (500–900 °C) and the type of activation (CO2, KOH) on the properties mentioned above in case of carbon xerogels (CXs) to understand the resulting electrochemical performances. Depending on the carbonisation temperature, CX materials differ in micropore surface area (722–1078 m2 g−1) while retaining a mesopore surface area ~300 m2 g−1, oxygen content (3–15%, surface oxygen 0–7%), surface functionalities, electrical conductivity (7 × 10−6–8 S m−1), and degree of amorphous or crystalline nature. Based on the results, electrochemical performances depend primarily on electrical conductivity, followed by surface oxygen content and meso-micropore connectivity. The way of activation using a varied extent of CO2 exposure and KOH concentrations played differently in CX in terms of pore connectivity from meso- to micropores and their contributions and degree of oxidation, and resulted in different electrochemical behaviours. Such performances of activated CXs depend solely on micro-mesopore features.
Collapse
|
124
|
Zeng R, Wu Y, Qian S, Li L, Zhang H, Chen Q, Luo Y, Chou SL. Graphene-Supported Naphthalene-Based Polyimide Composite as a High-Performance Sodium Storage Cathode. ACS APPLIED MATERIALS & INTERFACES 2022; 14:11448-11456. [PMID: 35213148 DOI: 10.1021/acsami.1c24012] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/14/2023]
Abstract
Electroactive acid anhydride with multicarbonyl is highly promising for electrochemical energy storage because of its high specific capacity and environmental benignity. Its low electrical conductivity and high dissolution in organic electrolyte, however, result in poor cycling and rate capabilities. Here, we report a naphthalene polyimide derivative (NPI) synthesized by using anhydride under condensation polymerization conditions, along with its composite with graphene (NPI-G) fabricated via in situ polymerization. The composite delivers a high reversible capacity and outstanding cycling stability and rate capability as a cathode for sodium-ion batteries (SIBs) owing to the formation of a polymer, the improvement in the electrical conductivity brought about by the highly dispersed graphene sheets, and the enhancement of structural stability resulting from the π-π stacking interaction between the phenyl groups of NPI and the six-member carbon rings of graphene. This investigation sheds light on the development, design, and screening of next-generation organic electrode materials with high performance for SIBs.
Collapse
|
125
|
Jia X, Lu F, Liu K, Han M, Su J, He H, Cai B. Improved performance of IT-SOFC by negative thermal expansion Sm 0.85Zn 0.15MnO 3addition in Ba 0.5Sr 0.5Fe 0.8Cu 0.1Ti 0.1O 3-δcathode. JOURNAL OF PHYSICS. CONDENSED MATTER : AN INSTITUTE OF PHYSICS JOURNAL 2022; 34:184001. [PMID: 35090142 DOI: 10.1088/1361-648x/ac4fe7] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/08/2021] [Accepted: 01/28/2022] [Indexed: 06/14/2023]
Abstract
To improve performance of intermediate temperature solid oxide fuel cells (IT-SOFCs), the negative thermal expansion (NTE) material Sm0.85Zn0.15MnO3(SZM) is introduced in Ba0.5Sr0.5Fe0.8Cu0.1Ti0.1O3-δ(BSFCT) cathode. XRD results indicate that BSFCT, SZM and Ce0.8Sm0.2O2-δ(SDC) oxides have good chemical compatibility up to 1173 K. The average linear thermal expansion coefficient of BSFCT-xSZM (x= 0, 10, 20 and 30 wt.%) decreases markedly from 29.2 × 10-6 K-1forx= 0 wt.% to 15.6 × 10-6 K-1forx= 30 wt.%. The electrochemical performance of single cells with configuration of NiO-BZCY|SDC|BSFCT-xSZM is comparatively investigated in the 773-973 K. The best performance is observed forx= 20 wt.%, which should be caused by the balance between thermal matching of cathode/electrolyte layers and oxygen reduction reaction activity of composite cathodes. The corresponding peak power density in the 773-973 K is 136-918 mW cm-2, which is 249%-64% higher than that (39-559 mW cm-2) with single BSFCT cathode. Due to the existence of electron blocking layer at anode/electrolyte interface, the open circuit voltage of all cells is higher than 1.0 V. In short, the introduction of NTE oxide in conventional cathode materials may provide an effective strategy to enhance the performance of IT-SOFCs with electron blocking layer.
Collapse
|