Functional recovery time after facial fractures: characteristics and associated factors in a sample of patients from southern Brazil

Understanding the cause, severity, and elapsed time for the restoration of the functions of maxillofacial injuries can contribute to the establishment of clinical priorities aiming at effective treatment and further prevention of facial trauma. The objective of this study was to understand the factors associated with the restoration of mastication, ocular, and nasal functions in the face of trauma victims, estimating their recovery time after surgical treatment. We analyzed 114 medical records of patients treated at the Hospital Montenegro, who attended follow-up consultations for up to 180 days. For analysis of the recovery time, we performed survival analysis, followed by COX analysis. We observed that half of the patients recovered their functions within 20 days. The average time for recovery from trauma in the zygomatic-orbital-malar-nasal complex was 11 days, and in the maxillary-mandibular complex, 21 days (HR: 1.5 [0.99 2.3], p = 0.055). Although functional reestablishment has reached high rates after the surgical approach, it is necessary to analyze the failing cases, as well as the economic impacts and the prevention strategies associated with facial trauma, to improve the service to the population.

Does Three-Dimensional Plate Offer Better Outcome and Reduce the Surgical Time Following Open Reduction and Internal Fixation of Adult Mandibular Unilateral Subcondylar Fractures. A Randomized Clinical Study

PURPOSE

The management of the condyle fractures continue to be a source of perineal controversy in the field of oral and maxillofacial trauma. The aim of this study was to compare the surgical feasibility, functional outcome, and stability of fixation between the conventional miniplate and 3-dimensional plate in the management of adult mandibular unilateral subcondylar fractures.

MATERIALS AND METHODS

A prospective randomized clinical study with well-structured inclusion and exclusion criteria was carried out. Patients were allocated into Group A (Miniplates) and Group B (3-D Plates). The primary outcome variables were time taken for fixation, maximum mouth opening, occlusal stability, increase in angulation, and increase in the gap between fractured segments in the radiograph. The secondary outcome variables were needed for intermaxillary fixation (IMF) with guiding elastics and jaw movements. Statistical analysis was done using χ² test and student's t test with P value less than 0.05 indicating statistical significance.

RESULTS

Forty-four patients (40 male and 4 female) were enrolled, with 22 patients in each group. Time taken for fixation using 3-D plates was significantly lower than conventional miniplates (9.6 ± 0.9 minutes with P value 0.001). Although clinical parameters showed improved results for Group B, there was no statistical significance. Radiological parameters ie increase in angulation, and increase in the gap, showed statistically significant results. Group A had significant increases in the angulation of the fractured condyle at the end of the third and sixth months with a P value of 0.008 and 0.0001, respectively. The gap between the fractured segments was significantly increased in Group A at the end of the first and third months, with a P value of 0.022 and 0.003, respectively.

CONCLUSIONS

Our results concluded that 3-D plate offers superior fracture fragment stability and less displacement of the fractured segments. It has an added advantage of the ease of adaptation and shorter operating time.

Stabilization of anterior mandibular fracture using different osteosynthesis devices: perioperative clinical notes

PURPOSE

There is still no definitive consensus about the ideal technique in the treatment of anterior mandibular fractures. Therefore, this study aimed to determine clinical and radiographic outcomes of four different internal fixation devices used for this type of fractures.

METHODS

This was a cohort study that included 64 fracture cases. Fractures were fixed using four types of open reduction internal fixation devices: single 2.0-mm mini-locking plates, double 2.0-mm miniplates, double lag screw and double microplates. Investigated variables were surgical duration, wound dehiscence, infection, occlusion, mouth opening, patient compliance, nerve damage and postoperative oedema.

RESULTS

Male patients constituted 90.6% of the study sample. A proportion of 33% of the fractures were single symphysis and 67% were parasymphysis fractures. The most time-saving technique was the lag screw followed by microplate with mean/SD of 50.65 ± 4.152 min. Wound dehiscence occurred in 4.7% and 3.1% of the miniplate and the mini-locking groups respectively. Miniplate and microplate groups had small interfragmentary space at 1-month postoperative radiographs, while mini-locking and lag screw groups had no extra-callus formation.

CONCLUSION

The double lag screw and the single mini-locking plate are the most effective devices for primary bone healing of displaced mandibular symphysis/parasymphysis fractures which is attributed to their enhanced stability. Miniplates and microplates gave functionally well-balanced fixation and were also associated with higher patient convenience due to improved adaptability and relatively lower cost than locking plates. Cost-effectiveness of lag screws in comparison to bone plates is particularly beneficial in low-income countries.

Nutritional intervention during maxillomandibular fixation of jaw fractures prevents weight loss and improves quality of life

Maxillomandibular fixation (MMF) for the management of jaw fractures leads to compromised nutritional intake and consequent weight loss and poor quality of life (QoL). The present study aimed to evaluate the effectiveness of a home-based dietary plan to prevent weight loss, and its effect on the QoL of patients who underwent four weeks of MMF for the treatment of maxillofacial fractures. A total of 50 patients were randomised into nutritional intervention (Group1) and non-intervention groups (Group 2). Patients in Group1 were counselled by a dietitian and given a diet plan. Patients in Group 2 were advised to take a liquid diet of their own choice in the form of shakes, juices, and milk, along with protein supplements. Patients in Group1 lost significantly less weight than those in Group 2 (p=0.001) at week four of follow up. Group1 patients had significantly better oral health-related QoL in the 'physical pain' domain during the two weeks of MMF, and in the 'physical discomfort' and 'psychological disability' domains two weeks after the release of MMF. They had significantly better nutrition-related QoL in all the domains during the two weeks of MMF and, except for the 'physical' domain, also during the two weeks after its release. Individual home-based diet plans effectively helped the patients maintain their weight and improved QoL.

Biomechanical evaluation of unilateral subcondylar fracture of the mandible on the varying materials: A finite element analysis

Fixation materials used in the surgical treatment of subcondylar fractures contribute to successful clinical outcomes. In this study, we simulated the mechanical properties of four fixation materials [titanium (Ti), magnesium alloy (Mg alloy), poly-L-lactic acid (PLLA), and hydroxyapatite/poly-L-lactide (HA-PLLA)] in a finite-element analysis model of subcondylar fracture. Two four-hole plates were fixed on the anterior and posterior surfaces of the subcondyle of the mandible. In the simulation model of a subcondylar fracture, we evaluated the stress distribution and mechanical deformation of fixation materials. The stress distribution conspicuously appeared on the condylar neck of the non-fractured side and the center of the anterior plate for all materials. More stress distribution to the biologic component appeared with HA-PLLA than with Ti or Mg alloy, but its effects were less prominent than that of PLLA. The largest deformation was observed with PLLA, followed by HA-PLLA, Mg alloy, and Ti. The results of the present study imply the clinical potential of the HA-PLLA fixation material for open reduction of subcondylar fractures.

Changing trends in the management of condylar fractures

Our aim was to evaluate the functional outcomes and complications of mandibular condylar fractures managed surgically and non-surgically. Patients were identified retrospectively from audit data and clinical records from 2005-2018, and functional outcomes were evaluated based on the development of complications at clinical follow up. Patients were categorised into three treatment groups: conservative (management with soft diet, analgesia, and monitoring), closed (management with intermaxillary fixation), and open reduction and internal fixation (ORIF). A total of 358 patients were included with a median age of 33 years (mean 38), and a male:female ratio of 2.7:1. A total of 72 patients (20%) were treated conservatively, 177 (49%) were treated with closed management, and 109 (31%) with ORIF. The ORIF group demonstrated better outcomes than the closed group in terms of reduced protrusive and lateral excursive movements, and temporomandibular joint (TMJ) pain; and in terms of occlusal derangement when compared with the conservative group. The ORIF group had poorer outcomes than both the closed and conservative groups in terms of maximum mouth opening, and temporary facial nerve injury occurred in 5/109 (5%) and condylar resorption in 2/109 (2%) of patients in the ORIF group. There was no incidence of permanent facial nerve injury, Frey syndrome, or paraesthesia of the auricular nerve. The trend that favours ORIF can be justified, as it offers improved functional outcomes in severe or displaced condylar fractures. However, this must be evaluated against the risk of potential surgical complications. Careful case selection is therefore necessary to optimise management of these injuries.

Surgical Management of Bilateral Mandibular Angle Fractures With a Third Molar in Line of Fracture: A European Multicenter Survey

PURPOSE

The aim of this survey was to investigate the surgical management of bilateral mandibular angle fracture (BMAF) in Europe.

METHODS

Data were collected from 2008 to 2018 on patients ≥ 16 years of age who underwent open reduction internal fixation (ORIF) for BMAF with a third molar in the fracture line. The study was conducted at 6 European trauma centers. The following data were recorded: sex, age, cause of the fracture, type of fracture (nondisplaced, displaced, comminuted), type of approach (intraoral, transbuccal, or extraoral), thickness of the plate (≤1.4 mm or ≥1.5 mm), number of plates, cause of plate removal, and third molar extraction status.

RESULTS

25 patients with BMAF (24 males, 1 female, 17 to 83 years old [mean: 28.2 years]) were collected. The main cause of BMAF was assault, and the main surgical approach was intraoral. The most common types of BMAF were displaced + undisplaced (11 patients), displaced + displaced (7 patients), undisplaced + undisplaced (6 patients), and comminuted + comminuted (1 patient). Osteosynthesis was performed with 2 ≤1.4 mm plates on 1 angular fracture and 1 ≤1.4 mm plate on the other fracture in 11 patients, 1 ≤1.4 mm plate on both angular fractures in 6 patients, 1 ≥1.5 mm plate on both fractures in 5 patients, and 2 ≤1.4 mm plates on both fractures in the remaining 3 patients. Out of 25 patients with BMAF, 7 third molars were extracted during ORIF. Among these patients, angular fracture fixation was performed in 3 cases with 1 ≥1.5 mm plate and in 4 patients with 2 ≤1.4 mm plates.

CONCLUSIONS

This retrospective multicenter survey indicates a trend of treating with open reduction and rigid internal fixation at least 1 angular fracture of BMAF and those cases requiring extraction of the third molar in the line of fracture.

Assessment of compression and strength of divergent screws mounted on miniplates and dynamic compression plate in fixation of mandibular body fractures: an in vitro study

Achieving compression in the fracture line gap by open reduction and internal fixation leads to more primary bone healing and therefore hastens the healing process and patient's rehabilitation. We aimed to evaluate the application of compression by a modification in screw insertion in miniplates to improve the efficiency of the previous relevant methods. In this in vitro experimental study 20 sheep hemimandibles were prepared. Following intentional fracturing of the hemimandibular bodies, the specimens were divided into two: the control and study groups (n=10 each). The control group was fixed with straight four-hole dynamic compression plate (DCP) without a bar and with parallel screws. The study group was fixed with a straight four-hole miniplate without a bar. Screws were divergently inserted into the bone with an angle of 45°. The differences in the fracture line gap were measured before and after fixation considering the indicators of compression. The strength of the fixation was also assessed with a universal testing machine. The control group provided more compression than the study group (p=0.4). There was no difference in the strength of fixation between the two groups. It is concluded that the application of the miniplates with divergent screws instead of DCP could encompass the advantages of both perspectives such as intraoral incisions and compressive force and prevent the disadvantages of compression plates such as hard adaptation.

Use of knotless barbed sutures for closure of intraoral incisions for maxillofacial trauma: a randomised controlled trial

The objective of this study was to assess the efficacy of knotless barbed sutures in intraoral wound closure for maxillofacial trauma in comparison with conventional (vicryl) sutures. This was a randomised controlled clinical trial involving 40 patients with isolated mandibular angle fractures who required intraoral incisions for open reduction and internal fixation (ORIF). The sample was randomised into the study group (20 patients) and control group (20 patients). Following fracture fixation by a standardised surgical protocol, the wound closure was done with bidirectional knotless barbed suture and vicryl for the study and control groups, respectively. The wounds were closed in layers (periosteum and mucosa). All operations were performed by a single surgeon. Outcome parameters measured were intraoperative wound closure time and wound healing using 'Landry's wound healing index' on the first, third, and seventh postoperative days. Statistically significant difference in suturing time was noted between the study and control group (p value <0.001). The study group demonstrated a mean (SD) suturing time of 9.46 (2.01) minutes, compared with the 17.61 (2.57) minutes in the control group. Wound healing was found to be better and statistically significant in the study group than the control group (p value<0.001). Knotless barbed suture is a promising alternative to vicryl for intraoral wound closure.

Do mandibular miniplates increase the risk of complex fracture in facial trauma recurrence? Case series

Whether to conserve or remove miniplates, widely used in oral and maxillofacial surgery, has not been agreed on in the literature. Complications such as pain, infection, and screw exposure or loosening have already been largely described. We present the consequences of a trauma recurrence on a mandible with miniplates. The data of 13 patients who had a mandibular fracture previously surgically treated with miniplates (ten mandibular fractures and three mandibular osteotomies) were analysed. All the patients were male; the average age was 32 years (range, 20-64 years). The mechanism of the second trauma was assault in most of the cases. The average time between the first osteosynthesis and the new fracture was 35 months (range, 6-128 months). The fractures occurred at a distance from the miniplates in all the cases except two. No plate fracture was reported. We hypothesised that miniplates reinforced the underlying bone, protecting it from fractures, and transmitted the forces to areas anterior or posterior to the miniplates or to the condyle. Thus, the risk of mandible trauma recurrence should be taken into account in the indication of plate removal, and the biomechanical consequences of the conservation of the miniplates should be studied.

[Internal fixation of mandibular comminuted fracture with mini-titanium plate: a retrospective study of 21 cases]

PURPOSE

To investigate the value of internal fixation in management of mandibular comminuted fracture with mini-titanium plate.

METHODS

Twenty-one patients with mandibular comminuted fracture treated in Stomatology Hospital of Shenyang from March 2017 to February 2018 were enrolled, the patients received internal fixation with mini-titanium plate. The lower mandibular margin, upper mandibular margin and middle outer cortex were fixed respectively. The postoperative fracture healing and adverse reactions were recorded and analyzed.

RESULTS

All patients achieved bone healing within 3 months after surgery, with an average duration of (1.53±0.36) months. Among 21 patients, six patients (28.57%) had minimal occlusion, and 1 patient (4.76%) had local infection. No microtitanium plate fracture, persistent pain, limited mouth opening, tooth injury, facial nerve injury or nonunion were found.

CONCLUSIONS

Internal fixation with mini-titanium for comminuted mandibular fracture patients without bone defects has the advantages of good postoperative fracture healing, short healing time and few adverse reactions.

Key points in surgical management of mandibular condylar fractures

Mandibular condylar fractures are among the most common facial fractures and some of the most difficult to manage. Opinions about the management of mandibular condylar fractures differ among surgeons. With the implementation of new technology, an increased understanding of fracture management, and better functional and morphological outcomes reported in the literature, open reduction and internal fixation is becoming many surgeons' preferred choice for the treatment of condylar fractures. Because surgical treatment of such fractures is complex, certain factors must be considered to achieve satisfactory outcomes. In this article, we summarise six key points in the management of mandibular condylar fractures: virtual evaluation of condylar fracture, a suitable surgical approach, good reduction, stable internal fixation, repair of the articular disc, and restoration of the mandibular arch width. We believe that these points will help to improve the prognosis of mandibular condyle fractures.

Maxillofacial trauma in a pregnant patient: Contemporary management principles with a case report & review of literature

Trauma during pregnancy deserves special attention because of its management objectives, i.e. well-being of both pregnant woman and foetus. Maxillofacial trauma directly affects the nutrition of foetus by interfering with the normal functions in a pregnant woman such as mouth opening, mastication and breathing. Hence early restitution of form and function of maxillofacial skeleton is essential. However, the gravid status is associated with numerous anatomical and physiological changes which present with clinical dilemma related to imaging and treatment. A careful scrutiny of the patient's systemic and gestational status is absolutely essential before, during and after instituting any interventional procedures. We present a case of bilateral condyle fracture in a 30-year-old pregnant woman in the third trimester (32 weeks). She was treated with inter maxillary fixation using orthodontic brackets & elastics. After successful restitution of occlusion, the patient was advised aggressive physiotherapy which ensured normal mouth opening. Two weeks later, the patient delivered uneventfully. The patient was followed up at one month and 3 month and demonstrated restitution of normal occlusion, mouth opening and lower facial height. This article aims at analyzing the contemporary principles in management of maxillofacial trauma in a pregnant woman and clarifying the common misconceptions.

Osteosynthesis of the Mandibular Condyle With Magnesium-Based Biodegradable Headless Compression Screws Show Good Clinical Results During a 1-Year Follow-Up Period

PURPOSE

The use of titanium-based implants in mandibular condyle fractures can require implant removal because of screw penetration through the condylar surface. The use of biodegradable implants can avoid a second operation for implant removal and the associated possible complications. We investigated the clinical and radiologic outcomes of osteosynthesis of mandibular condyle fractures (MCFs) with biodegradable magnesium-based compression screws.

MATERIALS AND METHODS

We performed a retrospective observational study of 6 patients who had been treated at our department. We recorded the changes in jaw movements over time, occlusion, and possible complications at defined intervals of 1, 3, 6, and 12 months postoperatively. We also compared the preoperative computed tomography (CT) scans with the postoperative cone-beam CT (CBCT) scans at 6 and 12 months postoperatively to evaluate mandibular condyle healing and screw degradation.

RESULTS

Of the 6 patients, 4 were men and 2 were women, with a mean age of 43.2 years (range, 30 to 66 years). All 6 patients had unilateral MCFs. All the patients showed well-restored function of the temporomandibular joint with significant improvement in mouth opening (46.17 ± 6.49 mm), right (10.67 ± 1.03 mm) and left (10.67 ± 1.97 mm) laterotrusion, and protrusion (10.17 ± 1.33 mm) distances to physiologic values. The CBCT scans showed the remodeling processes of the mandibular condyle and a few radiolucencies indicating the magnesium-based screws. Although penetration of 1 screw tip through the condylar surface had occurred, no implant removal was necessary owing to biodegradation of the implant.

CONCLUSIONS

The results of the present study have shown that biodegradable magnesium-based compression screws provide good clinical results and avoid implant removal.

Finite element analysis of mini-plate stabilization of human mandible angle fracture - a comparative study

PURPOSE

The purpose of this study was to analyze three patterns of mandible angle fracture treatment by means of the finite element analysis.

METHODS

Investigation has been based on the mandible geometry reconstructed with use of hospitalized patient CT data. The KLS Martin mini-plates with corresponding screws were used to establish proper fracture stabilization. Models were run assuming isotropic and elasto-plastic material properties of connecting devices and cortical bone. The main masticatory muscles and artificial temporomandibular joint have been incorporated to assure mandible physiological movement. The gage loading has been applied in three different locations to cover wider range of possible mastication loading cases during daily routine. A different contact conditions have been applied to the fracture plane to simulate both load bearing and sharing behaviors. Prepared FEM models reflect the most frequently used surgery's approaches to mandible angle fracture treatment. A specific nomenclature has been introduced to describe particular model. The tension plate, with one connecting mini-plate, two-point fixation and combined fixation, both using two mini-plates respectively.

RESULTS

Performed analysis allowed for a detailed estimation of the mini-plate connection response under the applied gauge loading. The equivalent stress within the mini-plates and surrounding cortical bone have been compared between all models. Regarding the fracture plane, the contact status and pressure have been considered.

CONCLUSIONS

The combined fixation model, acting as a biplanar fastener system, presents the highest flexibility and connection efficiency.

A retrospective evaluation of the treatment of viscerocranial fractures in Romania. A study of 1007 patients

AIM

The treatment of viscerocranial fractures is complex and involves orthopedic, surgical methods, or combinations of both. The aim of this study is to evaluate the treatment methods applied and the type of materials used in the case of viscerocranial fractures in our geographical area, as well as to assess postoperative complications depending on each type of treatment, the location and the characteristics of the fracture lines.

MATERIAL AND METHODS

A 10-year retrospective statistical analysis of 1007 patients treated in a Romanian university hospital was performed, the data being collected from patients' medical records.

RESULTS

The most frequent maxillofacial fractures were located in the mandible (62.16%). The zygomatic bone was the most fractured bone of the midface (44.91%). In the majority of the fractures, displacement of the fractured fragments occurred (84.40%). Most of the patients had a favorable evolution (97.8%) Orthopedic/closed treatment was the most frequent treatment applied (78.15%). This was followed by the greatest number of postoperative complications, while ORIF surgical treatment registered the smallest number of complications (p=0.209). The most frequent postoperative complication was osteitis (74.19%). The highest incidence of postoperative complications was found in the case of fractures in multiple locations and displacement of the fractured fragments (p=0.000).

CONCLUSIONS

The most effective treatment method in the case of maxillofacial fractures is ORIF surgery. The rate of postoperative complications is directly proportional to the number of fracture lines and the degree of bone displacement.

KEY WORDS

Maxillofacial, Trauma, Treatment.

Efficacy of open reduction and internal fixation in achieving bony union of comminuted mandibular fractures caused by civilian gunshot injuries

INTRODUCTION

Comminuted fractures of the mandible caused by gunshot injuries were traditionally treated with closed reduction using maxillo-mandibular fixation (MMF).^2,3 Open reduction and internal fixation (ORIF) has become a valuable treatment modality in the management of comminuted mandibular fractures due to low rate of complications and predictable healing ^{4, 5}.

OBJECTIVE

To compare the efficacy of ORIF compared with MMF in achieving bony union of comminuted mandibular fractures in gunshot injury patients.

METHOD

ology: Randomized controlled trial conducted at the department of Oral & Maxillofacial Surgery, Abbasi Shaheed Hospital for a period of 3 years; total of 40 patients divided equally into two groups. Group A were treated with ORIF and group B were treated with MMF. Callus formation radiographically was confirmed by 8th week post operatively. Data was collected using proforma, entered on a statistical software SPSS version 20. Frequency percentages were computed for age and gender. Chi square and Fisher's exact tests were applied. P value ≤ 0.05 considered significant.

RESULT

A total of 40 patients of gunshot injuries were included in this study. 37 (92.5%) were males and 3 (7.5%) were Females with mean age of 36.35 ± 12.9 years SD. 19 (47.5%) patients showed callus formation, whereas, 21 (52.5%) did not. Out of 19 patients, 14 (70%) belonged to group A, and 5 (25%) from group B. The final healing considered by 8th week was in 16 (80%) of ORIF group A, and 8 (40%) group B (MMF) after calculating the clinical and radiographic evidences.

CONCLUSION

Comparative clinical trials have proven that ORIF is superior to MMF in the management of comminuted mandibular fractures. Early primary repair and internal fixation provides predictable and cost effective results.

Antibiotic Duration and Outcome Complications for Surgical Site Infection Prevention in Traumatic Mandible Fracture

BACKGROUND

The appropriate duration of antibiotic therapy for surgical site infection (SSI) prevention in traumatic mandibular fracture repair is unknown, and practices vary significantly. The objective of this study was to characterize antibiotic duration and outcomes after surgical repair of traumatic mandibular fracture.

METHODS

A single-center, retrospective analysis of all adult patients who underwent surgical fixation of a mandible fracture between January 2014 and December 2016 was performed. Operative service was categorized between otolaryngology (ear, nose, and throat surgery), plastic and reconstructive surgery, and oral and maxillofacial services. Primary outcomes were SSI and operative complications (including osteomyelitis, nonunion, malocclusion, and hardware infections). Differences in antibiotic prescription pattern were analyzed using analysis of variance test and Pearson chi-squared test.

RESULTS

A total of 75 patients were included in the study with 33 (44.0%), 26 (34.7%), and 16 (21.3%) managed by plastic and reconstructive surgery, ear, nose, and throat surgery, and oral and maxillofacial services, respectively. Median age was 30.0 y. Median injury severity score was 4.0. There was no significant difference in hospital length of stay (P = 0.44), intensive care unit length of stay (P = 0.53), or postoperative complications (P = 0.15). None of our patients developed an SSI or postantibiotics complications. Although the total inpatient duration of antibiotics was not significantly different among services (P = 0.37), there were significant differences in outpatient duration of antibiotics (P = 0.007) and total duration of antibiotics (P = 0.003).

CONCLUSIONS

Duration of antibiotics is not associated with postoperative SSI or antibiotics-related complications. The wide variation in prescribing practices and lack of any clear benefit for prolonged antibiotics provides an opportunity to explore the benefits of a standardized short course of antibiotics.

LEVEL OF EVIDENCE

Therapeutic study, III.

Open reduction and internal fixation of mandibular condylar fractures: A national inpatient sample analysis, 2005-2014

The purpose of this study was to compare outcomes of open reduction and internal fixation (ORIF) versus closed reduction (CR) for mandibular condylar fractures.Patients included in the National Inpatient Sample (NIS) database (2005-2014) who were admitted to the hospital for unilateral mandibular condylar fracture were included in the analysis. Patient characteristics and clinical outcomes were compared between those who received ORIF and those receiving CR. Logistic regression analysis was performed to estimate odds ratios (ORs) for each aspect of the main observed events.NIS data of 12,303 patients who underwent ORIF and 4310 patients who underwent CR were analyzed. Compared to CR, ORIF had an increased risk of longer hospital stay (adjusted OR [aOR] = 1.78, 95% confidence intervals [CIs] = 1.51-2.09), higher total medical cost (aOR = 2.57, 95% CI = 2.17-3.05), and hematoma development (aOR = 10.66, 95% CI = 1.43-75.59), but had a lower risk of having wound complications (aOR = 0.86, 95% CI = 0.79-0.93).Patients with mandibular condylar fractures who receive ORIF have greater risk of having an extended hospital stay, higher total medical costs, and hematoma development but lower risk of experiencing wound complications compared to those who receive CR.

Mandibular fracture after third molar removal: a case report

Surgical removal of third molars is associated with complications that can be as common as pain and trismus and as rare as mandibular fracture. A fracture can occur when the resistance of the bone tissue is lower than the forces applied by the surgeon during the procedure. The aim of this article is to report a case of jaw fracture after tooth extraction and subsequent surgical treatment of the fracture under general anesthesia with an option for a submandibular approach. A plate and screw system with a 2.4-mm profile was used for osteosynthesis after reduction of the fracture. The patient was followed up for 6 months after surgery and reported no functional or esthetic complaints. Treatment of mandibular fractures should aim to reestablish functional occlusion and mandibular continuity with the least possible risk of adverse sequelae. Planning for each individual case of third molar extraction requires accurate clinical examination and image evaluation to lessen the risk of fracture.

Biomechanical Evaluation of Mandibular Condyle Fracture Osteosynthesis Using the Rhombic Three-Dimensional Condylar Fracture Plate

PURPOSE

The aim of the present study was to evaluate the biomechanical stability of osteosynthesis in mandibular condyle fractures using a newly designed rhombic 3-dimensional (3D) condylar fracture plate and compare it with that using standard two 4-hole miniplates and with that in nonfractured condyles.

MATERIALS AND METHODS

Using 200 porcine mandibles, 3 different monocortical plating techniques were evaluated. The condyles were fractured along a defined line tangentially through the sigmoid notch and perpendicular to the posterior border. After anatomic reduction, osteosynthesis was performed using either standard rhombic 3D condylar fracture plates and standard screws (group A) or locking rhombic 3D condylar fracture plates, which were fixed either with standard screws (group B) or locking screws (group C). For comparison, nonfractured condyles (group D) and condyles fixed with standard two 4-hole miniplates and 8 screws (group E) were included. Using a universal mechanical testing machine (TIRA Test 2720; TIRA GmbH Schalkau, Germany), each group was subjected to linear loading from laterally to medially, medially to laterally, anteriorly to posteriorly, and posteriorly to anteriorly. The maximum axial force and displacement at the maximum force were measured. The mean values were compared for statistical significance using analysis of variance with Bonferroni's correction (statistical significance set at P < .05).

RESULTS

The main mode of failure in the plating techniques investigated was the pull out of screws from the proximal fragment. We found no statistically significant differences in the stability of osteosynthesis between the two 4-hole miniplates and the rhombic 3D condylar fracture plate when loading from posteriorly to anteriorly, laterally to medially, and medially to laterally. However, when loading from anteriorly to posteriorly, a statistically significant difference between the standard and locking system and the two 4-hole miniplate system was observed, with the latter proving more stable.

CONCLUSIONS

The results of the present biomechanical study suggest that the rhombic 3D condylar fracture plates are suitable for the treatment of condylar neck fractures. Both types of the plate are able to resist physiologic strains comparable to the two 4-hole miniplates.

Ludwig's angina, a rare complication of mandibular fractures

Traumas are a major problem worldwide. A considerable proportion of traumas are located in the cephalic extremity. Neglect of these disorders by patients or those responsible for patient management may result in particularly serious consequences. This paper presents the case of a 58-year-old male patient with an intraorally open mandibular fracture, which left untreated for 3 days, was complicated by Ludwig's angina. Following aggressive surgical treatment during which the mandibular fracture was manually reduced and immobilized with a metal splint fixed with circumdental wires and effective antibiotic therapy, the septic process was terminated and the patient's fracture and infected wound were healed. The correct and rapid treatment of open mandibular fractures is mandatory in order to avoid severe septic complications.

Postoperative CT of the Mandible Following Trauma: Review of Normal Appearances and Common Complications

RATIONALE AND OBJECTIVES

Surgeons aim to restore occlusion and jaw function to baseline status for patients with mandibular fractures using either closed treatment or reduction and fixation.

MATERIALS AND METHODS

Occlusion is defined as the relationship between the maxillary and mandibular teeth as they approach each other.

RESULTS

Radiologists should be familiar with the goals of repair to help identify which treatment is adequate as well as to diagnose potential complications. Some of the more common complications encountered are infection, nonunion or malunion, and malocclusion.

CONCLUSION

We provide a comprehensive review of both the desired and untoward CT findings after surgical repair of traumatic mandibular injuries.