Tunable clustering of magnetic nanoparticles in microgels: enhanced magnetic relaxivity by modulation of network architecture

In the present work we used microgels as colloidal containers for the loading of hydrophobic magnetic nanoparticles using the solvent exchange method. We varied systematically two parameters: (i) the crosslinking degree of microgels (1-4.5 mol% crosslinker) and (ii) loading of hydrophobic magnetite nanoparticles (d = 7 nm) in microgels (2-10 wt%). The experimental data show that the interplay between these two parameters provides efficient control over the clustering of magnetic nanoparticles in the microgel structure. Transverse magnetization relaxation measurements indicate that the formation of nanoparticle clusters in microgels induces non-linear enhancement of the relaxivity with the increase of nanoparticle loading in microgels. The results suggest that the modulation of the microgel network architecture can be efficiently applied to trigger self-assembly processes inside microgels and design hybrid colloids with unusual morphologies and properties.

Calcium phosphate/microgel composites for 3D powderbed printing of ceramic materials

Composites of microgels and calcium phosphates are promising as drug delivery systems and basic components for bone substitute implants. In this study, we synthesized novel composite materials consisting of pure β-tricalcium phosphate and stimuli-responsive poly(N-vinylcaprolactam-co-acetoacetoxyethyl methacrylate-co-vinylimidazole) microgels. The chemical composition, thermal properties and morphology for obtained composites were extensively characterized by Fourier transform infrared, X-ray photoelectron spectroscopy, IGAsorp moisture sorption analyzer, thermogravimetric analysis, granulometric analysis, ESEM, energy dispersive X-ray spectroscopy and TEM. Mechanical properties of the composites were evaluated by ball-on-three-balls test to determine the biaxial strength. Furthermore, initial 3D powderbed-based printing tests were conducted with spray-dried composites and diluted 2-propanol as a binder to evaluate a new binding concept for β-tricalcium phosphate-based granulates. The printed ceramic bodies were characterized before and after a sintering step by ESEM. The hypothesis that the microgels act as polymer adhesive agents by efficient chemical interactions with the β-tricalcium phosphate particles was confirmed. The obtained composites can be used for the development of new scaffolds.

Internal structure and phase transition behavior of stimuli-responsive microgels in PEG melts

In this work we investigated the behaviour of stimuli-responsive poly(N-vinylcaprolactam) (PVCL) microgels in poly(ethylene glycol) (PEGs) with a linear architecture. We performed small-angle neutron scattering (SANS) experiments at two different microgel concentrations and various temperatures. The results were compared with those on PVCL microgels in water. PVCL in PEG (molecular weight M_W = 2 kg mol^-1) exhibits a volume phase transition temperature (VPTT) at a temperature between 160 and 180 °C. The diameter of the swollen microgel is only slightly smaller than in water. Furthermore, with increasing molecular weight of the surrounding polymer matrices fewer chains penetrate the microgel particles. In agreement with that, we identify a decreasing diameter with increasing molecular weight. In the short chain polymers up to M_W = 3 kg mol^-1, PVCL is well dispersed in the matrices with only minor signatures of agglomeration. For the well dispersed systems, we find unperturbed chain conformation of the PEG. Our results clearly show that the miscibility of PVCL and PEG disappears in a molecular weight range of 3 to 10 kg mol^-1.

Noninvasive Assessment of Elimination and Retention using CT-FMT and Kinetic Whole-body Modeling

Fluorescence-mediated tomography (FMT) is a quantitative three-dimensional imaging technique for preclinical research applications. The combination with micro-computed tomography (µCT) enables improved reconstruction and analysis. The aim of this study is to assess the potential of µCT-FMT and kinetic modeling to determine elimination and retention of typical model drugs and drug delivery systems.

We selected four fluorescent probes with different but well-known biodistribution and elimination routes: Indocyanine green (ICG), hydroxyapatite-binding OsteoSense (OS), biodegradable nanogels (NG) and microbubbles (MB). µCT-FMT scans were performed in twenty BALB/c nude mice (5 per group) at 0.25, 2, 4, 8, 24, 48 and 72 h after intravenous injection. Longitudinal organ curves were determined using interactive organ segmentation software and a pharmacokinetic whole-body model was implemented and applied to compute physiological parameters describing elimination and retention.

ICG demonstrated high initial hepatic uptake which decreased rapidly while intestinal accumulation appeared for around 8 hours which is in line with the known direct uptake by hepatocytes followed by hepatobiliary elimination. Complete clearance from the body was observed at 48 h. NG showed similar but slower hepatobiliary elimination because these nanoparticles require degradation before elimination can take place. OS was strongly located in the bones in addition to high signal in the bladder at 0.25 h indicating fast renal excretion. MB showed longest retention in liver and spleen and low signal in the kidneys likely caused by renal elimination or retention of fragments. Furthermore, probe retention was found in liver (MB, NG and OS), spleen (MB) and kidneys (MB and NG) at 72 h which was confirmed by ex vivo data. The kinetic model enabled robust extraction of physiological parameters from the organ curves.

In summary, µCT-FMT and kinetic modeling enable differentiation of hepatobiliary and renal elimination routes and allow for the noninvasive assessment of retention sites in relevant organs including liver, kidney, bone and spleen.

Physicochemical Characterization of the Shell Composition of PBCA-Based Polymeric Microbubbles

Microbubbles (MB) are routinely used as contrast agents for ultrasound (US) imaging. In recent years, MB have also attracted interest as drug delivery systems. Soft-shelled lipidic MB tend to be more advantageous for US imaging, while hard-shelled polymeric MB appear to be more suitable for drug delivery purposes because of their thicker shell and the resulting higher drug loading capacity. The physicochemical composition of the shell of polymeric MB, however, remains largely unknown. This study sets out to evaluate the molecular weight and polydispersity of the building blocks constituting the shell of poly(butyl cyanoacrylate) (PBCA) MB. Several different PBCA MB were synthesized, varying preparation parameters such as pH, surfactant, stirring speed, and stirring time. Using gel permeation chromatography, it is found that the number average molecular weight (M _n ) of the polymer chains in the shell of PBCA MB is 4 kDa, and that >99% of the polymer chains are below 40 kDa. This demonstrates that virtually all polymeric building blocks in the shell of PBCA MB have a size which allows for renal excretion, thereby supporting their use for drug delivery applications.

Gadolinium-Loaded Poly(N-vinylcaprolactam) Nanogels: Synthesis, Characterization, and Application for Enhanced Tumor MR Imaging

We report the synthesis of poly(N-vinylcaprolactam) nanogels (PVCL NGs) loaded with gadolinium (Gd) for tumor MR imaging applications. The PVCL NGs were synthesized via precipitation polymerization using the monomer N-vinylcaprolactam (VCL), the comonomer acrylic acid (AAc), and the degradable cross-linker 3,9-divinyl-2,4,8,10-tetraoxaspiro-[5,5]-undecane (VOU) in aqueous solution, followed by covalently binding with 2,2',2″-(10-(4-((2-aminoethyl)amino)-1-carboxy-4-oxobutyl)-1,4,7,10-tetraazacyclododecane-1,4,7-triyl) triacetic acid (NH₂-DOTA-GA)/Gd complexes. We show that the formed Gd-loaded PVCL NGs (PVCL-Gd NGs) having a size of 180.67 ± 11.04 nm are water dispersible, colloidally stable, uniform in size distribution, and noncytotoxic in a range of the studied concentrations. The PVCL-Gd NGs also display a r₁ relaxivity (6.38-7.10 mM^-1 s^-1), which is much higher than the clinically used Gd chelates. These properties afforded the use of the PVCL-Gd NGs as an effective positive contrast agent for enhanced MR imaging of cancer cells in vitro as well as a subcutaneous tumor model in vivo. Our study suggests that the developed PVCL-Gd NGs could be applied as a promising contrast agent for T₁-weighted MR imaging of diverse biosystems.

Modified Glass Ionomer Cement with "Remove on Demand" Properties: An In Vitro Study

Objectives: To investigate the influence of different temperatures on the compressive strength of glass ionomer cement (GIC) modified by the addition of silica-coated wax capsules; Material and Methods: Commercially-available GIC was modified by adding 10% silica-coated wax capsules. Test blocks were fabricated from pure cement (control) and modified cement (test), and stored in distilled water (37 °C/23 h). The compressive strength was determined using a universal testing machine under different temperatures (37 °C, 50 °C, and 60 °C). The maximum load to failure was recorded for each group. Fractured surfaces of selected test blocks were observed by scanning electron microscopy (SEM); Results: For the control group, the average compressive strength was 96.8 ± 11.8, 94.3 ± 5.7 and 72.5 ± 5.7 MPa for the temperatures 37 °C, 50 °C and 60 °C respectively. The test group reported compressive strength of 64.8 ± 5.4, 47.1 ± 5.4 and 33.4 ± 3.6 MPa at 37 °C, 50 °C and 60 °C, respectively. This represented a decrease of 28% in compressive strength with the increase in temperature from 37 °C to 50 °C and 45% from the 37 °C to the 60 °C group; Conclusion: GIC modified with 10% silica-coated wax capsules and temperature application show a distinct effect on the compressive strength of GIC. Considerable compressive strength reduction was detected if the temperature was above the melting temperature of the wax core.

Hydrophobic superparamagnetic FePt nanoparticles in hydrophilic poly(N-vinylcaprolactam) microgels: a new multifunctional hybrid system

We report the synthesis of a new multifunctional colloidal hybrid system consisting of thermoresponsive amphiphilic biocompatible poly(N-vinylcaprolactam) microgels loaded with hydrophobic superparamagnetic FePt nanoparticles (NPs).

Borazine-based inorganic–organic hybrid cyclomatrix microspheres by silicon/boron exchange precipitation polycondensation

Borazine-based inorganic–organic hybrid cyclomatrix microspheres with a mean diameter of about 900 nm have been obtained via a novel silicon/boron exchange precipitation polycondensation approach.

Biofunctionalized zinc peroxide (ZnO2) nanoparticles as active oxygen sources and antibacterial agents

Small and uniform zinc peroxide nanoparticles were synthesized and biofunctionalizedin situ viaa high-pressure-impinging-jet-reactor for specific antibacterial applications.

Diffusive Motion of Linear Microgel Assemblies in Solution

Due to the ability of microgels to rapidly contract and expand in response to external stimuli, assemblies of interconnected microgels are promising for actuation applications, e.g., as contracting fibers for artificial muscles. Among the properties determining the suitability of microgel assemblies for actuation are mechanical parameters such as bending stiffness and mobility. Here, we study the properties of linear, one-dimensional chains of poly(N-vinylcaprolactam) microgels dispersed in water. They were fabricated by utilizing wrinkled surfaces as templates and UV-cross-linking the microgels. We image the shapes of the chains on surfaces and in solution using atomic force microscopy (AFM) and fluorescence microscopy, respectively. In solution, the chains are observed to execute translational and rotational diffusive motions. Evaluation of the motions yields translational and rotational diffusion coefficients and, from the translational diffusion coefficient, the chain mobility. The microgel chains show no perceptible bending, which yields a lower limit on their bending stiffness.

A facile approach for thermal and reduction dual-responsive prodrug nanogels for intracellular doxorubicin delivery

In this study, thermal and redox dual sensitive nanogels based on N-vinylcaprolactam (VCL) and N-succinimidyl methacrylate (Suma) crosslinked with diallyl disulfide were synthesized via a facile and straightforward method. The reactive succinimide groups were mainly located in the nanogel shell which increases considerably their accessibility for conjugation reactions. Doxorubicin (DOX) was successfully loaded into the nanogel through two different routes. Approximately 91.3% of DOX molecules were covalently bound to the nanogel network via coupling with succinimide groups under mild conditions to obtain prodrug nanogels, while 8.7% of DOX molecules were captured into the nanogels via electrostatic interactions with the -COOH group from the hydrolyzed ester groups of the nanogels. The DOX-loaded nanogels demonstrated volume phase transition temperature (VPTT) near human physiological temperature. The nanogels shrink near body temperature, which could help lock the drug molecules stably in blood circulation. The conjugation of DOX molecules in nanogels avoided premature unspecific drug release under physiological conditions. The small amount of physically loaded DOX (due to electrostatic interactions) could be partially released as free DOX due to the increasing acidic conditions in the endosome/lysosome pathway. The chemically conjugated DOX was released in the form of a prodrug polymer triggered by the high concentration of glutathione in the cytosol that induced nanogel degradation. The present drug delivery system exhibits a sustainable delivery profile in the intracellular release study and high antitumor activity. We are convinced that the thermal and reduction dual-responsive prodrug nanogels have tremendous potential in controlled drug release.