Further development of Axisymmetric Drop Shape Analysis-Captive Bubble for pulmonary surfactant related studies

The methodology combining Axisymmetric Drop Shape Analysis (ADSA) with a captive bubble (ADSA-CB) facilitates pulmonary surfactant related studies. The accuracy of ADSA-CB is crucially dependent on the quality of the bubble profile extracted from the raw image. In a previous paper, an image analysis scheme featuring a Canny edge detector and a Axisymmetric Liquid Fluid Interfaces-Smoothing (ALFI-S) algorithm was developed to process captive bubble images under a variety of conditions, including images with extensive noise and/or lack of contrast. A new version of ADSA-CB based on that image analysis scheme is developed and applied to pulmonary surfactant and pulmonary surfactant-polymer systems. The new version is found to be highly noise-resistant and well self-adjusting.

Measurement of the exclusive 3He(e,e'p) reaction below the quasielastic peak

New, high-precision measurements of the 3He(e,e(')p) reaction using the A1 Collaboration spectrometers at the Mainz microtron MAMI are presented. These were performed in antiparallel kinematics at energy transfers below the quasielastic peak, and at a central momentum transfer of 685 MeV/c. Cross sections and distorted momentum distributions were extracted and compared to theoretical predictions and existing data. The longitudinal and transverse behavior of the cross section was also studied. Sizable differences in the cross-section behavior from theoretical predictions based on the plane wave impulse approximation were observed in both the two- and three-body breakup channels. Full Faddeev-type calculations account for some of the observed excess cross-section, but significant differences remain.

Optimization of combined electron and photon beams for breast cancer

Recently, intensity-modulated radiation therapy and modulated electron radiotherapy have gathered a growing interest for the treatment of breast and head and neck tumours. In this work, we carried out a study to combine electron and photon beams to achieve differential dose distributions for multiple target volumes simultaneously. A Monte Carlo based treatment planning system was investigated, which consists of a set of software tools to perform accurate dose calculation, treatment optimization, leaf sequencing and plan analysis. We compared breast treatment plans generated using this home-grown optimization and dose calculation software for different treatment techniques. Five different planning techniques have been developed for this study based on a standard photon beam whole breast treatment and an electron beam tumour bed cone down. Technique 1 includes two 6 MV tangential wedged photon beams followed by an anterior boost electron field. Technique 2 includes two 6 MV tangential intensity-modulated photon beams and the same boost electron field. Technique 3 optimizes two intensity-modulated photon beams based on a boost electron field. Technique 4 optimizes two intensity-modulated photon beams and the weight of the boost electron field. Technique 5 combines two intensity-modulated photon beams with an intensity-modulated electron field. Our results show that technique 2 can reduce hot spots both in the breast and the tumour bed compared to technique 1 (dose inhomogeneity is reduced from 34% to 28% for the target). Techniques 3, 4 and 5 can deliver a more homogeneous dose distribution to the target (with dose inhomogeneities for the target of 22%, 20% and 9%, respectively). In many cases techniques 3, 4 and 5 can reduce the dose to the lung and heart. It is concluded that combined photon and electron beam therapy may be advantageous for treating breast cancer compared to conventional treatment techniques using tangential wedged photon beams followed by a boost electron field.

Bisphosphonate treatment affects trabecular bone apparent modulus through micro-architecture rather than matrix properties

Bisphosphonates are emerging as an important treatment for osteoporosis. But whether the reduced fracture risk associated with bisphosphonate treatment is due to increased bone mass, improved trabecular architecture and/or increased secondary mineralization of the calcified matrix remains unclear. We examined the effects of bisphosphonates on both the trabecular architecture and matrix properties of canine trabecular bone. Thirty-six beagles were divided into a control group and two treatment groups, one receiving risedronate and the other alendronate at 5-6 times the clinical dose for osteoporosis treatment. After one year, the dogs were killed, and samples from the first lumbar vertebrae were examined using a combination of micro-computed tomography, finite element modeling, and mechanical testing. By combining these methods, we examined the treatment effects on the calcified matrix and trabecular architecture independently. Conventional histomorphometry and microdamage data were obtained from the second and third lumbar vertebrae of the same dogs [Bone 28 (2001) 524]. Bisphosphonate treatment resulted in an increased apparent Young's modulus, decreased bone turnover, increased calcified matrix density, and increased microdamage. We could not detect any change in the effective Young's modulus of the calcified matrix in the bisphosphonate treated groups. The observed increase in apparent Young's modulus was due to increased bone mass and altered trabecular architecture rather than changes in the calcified matrix modulus. We hypothesize that the expected increase in the Young's modulus of the calcified matrix due to the increased calcified matrix density was counteracted by the accumulation of microdamage.

Ethanol inhibits brain-derived neurotrophic factor-mediated intracellular signaling and activator protein-1 activation in cerebellar granule neurons

Developmental exposure to ethanol causes profound damage to the cerebellum, ranging from aberration in neuronal differentiation to cell loss. As a major neurotrophic factor, brain-derived neurotrophic factor (BDNF) and its receptor TrkB are expressed in the developing, as well as adult, cerebellum. Many neurotrophic effects of BDNF are mediated by gene transcription. We hypothesized that ethanol interfered with BDNF signaling and disrupted BDNF-regulated transcriptional activity. Using a transgenic mouse model expressing an activator protein-1 (AP-1) luciferase reporter construct, we demonstrated that BDNF stimulated AP-1 transactivation in cultured cerebellar granule neurons. This observation was validated by the study using a human neuronal cell line expressing inducible TrkB (TB8 neuroblastoma cells). BDNF induced AP-1 transactivation, as well as increased the binding activity of AP-1 protein complex to a DNA sequence containing AP-1 sites in TB8 cells. BDNF-mediated AP-1 activation was mediated by PI3K/Akt and JNK pathways; BDNF activated Akt and JNKs, and blocking these pathways significantly inhibited BDNF-stimulated AP-1 transactivation. More importantly, ethanol inhibited BDNF-mediated activation of PI3K/Akt and JNKs, and blocked BDNF-stimulated AP-1 activation. Since ethanol did not affect either the expression or autophosphorylation of TrkB, it could be concluded that the site of ethanol action was downstream of TrkB. The present study establishes that this AP-1 reporter transgenic mouse model is valuable for assessing AP-1 activity in the CNS neurons. Our results provide an insight into molecular mechanism(s) of ethanol action.

Adaptation of subchondral bone in osteoarthritis

Osteoarthritis is a chronic joint disease with pathological changes in the articulating cartilage and all other tissues that occupy the joint. Radin and coworkers have suggested the involvement of subchondral bone in the disease process. However, evidence for an essential role in the etiology has never been proven. Recent studies showing reduced chemical and mechanical properties of subchondral bone in various stages of the disease have invigorated interest in the role of subchondral bone in the development and progression of the disease. The current study showed that the concept of bone adaptation might explain subchondral stiffening, a process where subchondral bone becomes typically sclerotic in osteoarthritis. In addition, we report reduced mechanical matrix tissue properties as well as an increase in denatured collagen content. In conclusion, although osteoarthritic bone tissue contains increased denatured collagen and has reduced matrix mechanical properties, the widely accepted concept of subchondral stiffening is compatible with the process of normal bone adaptation.

Architectural measures of the cancellous bone of the mandibular condyle identified by principal components analysis

As several morphological parameters of cancellous bone express more or less the same architectural measure, we applied principal components analysis to group these measures and correlated these to the mechanical properties. Cylindrical specimens (n = 24) were obtained in different orientations from embalmed mandibular condyles; the angle of the first principal direction and the axis of the specimen, expressing the orientation of the trabeculae, ranged from 10 degrees to 87 degrees. Morphological parameters were determined by a method based on Archimedes' principle and by micro-CT scanning, and the mechanical properties were obtained by mechanical testing. The principal components analysis was used to obtain a set of independent components to describe the morphology. This set was entered into linear regression analyses for explaining the variance in mechanical properties. The principal components analysis revealed four components: amount of bone, number of trabeculae, trabecular orientation, and miscellaneous. They accounted for about 90% of the variance in the morphological variables. The component loadings indicated that a higher amount of bone was primarily associated with more plate-like trabeculae, and not with more or thicker trabeculae. The trabecular orientation was most determinative (about 50%) in explaining stiffness, strength, and failure energy. The amount of bone was second most determinative and increased the explained variance to about 72%. These results suggest that trabecular orientation and amount of bone are important in explaining the anisotropic mechanical properties of the cancellous bone of the mandibular condyle.

Changes in the three-dimensional microstructure of human tibial cancellous bone in early osteoarthritis

We obtained medial and lateral subchondral cancellous bone specimens from ten human postmortem proximal tibiae with early osteoarthritis (OA) and ten normal age- and gender-matched proximal tibiae. The specimens were scanned by micro-CT and the three-dimensional microstructural properties were quantified.

Medial OA cancellous bone was significantly thicker and markedly plate-like, but lower in mechanical properties than normal bone. Similar microstructural changes were also observed for the lateral specimens from OA bone, although there had been no sign of cartilage damage. The increased trabecular thickness and density, but relatively decreased connectivity suggest a mechanism of bone remodelling in early OA as a process of filling trabecular cavities. This process leads to a progressive change of trabeculae from rod-like to plate-like, the opposite to that of normal ageing. The decreased mechanical properties of subchondral cancellous bone in OA, which are due to deterioration in architecture and density, indicate poor bone quality.

Changes in the three-dimensional microstructure of human tibial cancellous bone in early osteoarthritis

We obtained medial and lateral subchondral cancellous bone specimens from ten human post-mortem proximal tibiae with early osteoarthritis (OA) and ten normal age- and gender-matched proximal tibiae. The specimens were scanned by micro-CT and the three-dimensional microstructural properties were quantified. Medial OA cancellous bone was significantly thicker and markedly plate-like, but lower in mechanical properties than normal bone. Similar microstructural changes were also observed for the lateral specimens from OA bone, although there had been no sign of cartilage damage. The increased trabecular thickness and density, but relatively decreased connectivity suggest a mechanism of bone remodelling in early OA as a process of filling trabecular cavities. This process leads to a progressive change of trabeculae from rod-like to plate-like, the opposite to that of normal ageing. The decreased mechanical properties of subchondral cancellous bone in OA, which are due to deterioration in architecture and density, indicate poor bone quality.

Particle selection for laser-accelerated proton therapy feasibility study

In this paper we present calculations for the design of a particle selection system for laser-accelerated proton therapy. Laser-accelerated protons coming from a thin high-density foil have broad energy and angular spectra leading to dose distributions that cannot be directly used for therapeutic applications. Our solution to this problem is a compact particle selection and collimation device that delivers small pencil beams of protons with desired energy spectra. We propose a spectrometer-like particle selection and beam modulation system in which the magnetic field will be used to spread the protons spatially according to their energies and emitting angles. Subsequently, an aperture will be used to select the protons within a therapeutic window of energy (energy modulation). It will be shown that for the effective proton spatial differentiation, the primary collimation device should be used, which will collimate protons to the desired angular distribution and limit the spatial mixing of different energy protons once they have traveled through the magnetic system. Due to the angular proton distribution, the spatial mixing of protons of different energies will always be present and it will result in a proton energy spread with the width depending on the energy. For 250 MeV protons, the width (from the maximum to the minimum energy) is found to be 50 MeV for the magnetic field configuration used in our calculations. As the proton energy decreases, its energy width decreases as well, and for 80 MeV protons it equals 9 MeV. The presence of the energy width in the proton energy distribution will modify the depth dose curves needed for the energy modulation calculation. The matching magnetic field setup will ensure the refocusing of the selected protons and the final beam will be collimated by the secondary collimator. The calculations presented in this article show that the dose rate that the selection system can yield is on the order of D=260 Gy/min for a field size of 1 x 1 cm2.

Canine cancellous bone microarchitecture after one year of high-dose bisphosphonates

We examined the effects of one-year high-dose bisphosphonates (risedronate 0.5 mg/kg/day or alendronate 1.0 mg/kg/day) on the three-dimensional (3-D) microstructural and mechanical properties of canine cancellous bone. A high-resolution micro-CT scanner was used to scan cubic specimens produced from the first lumbar vertebrae. Microstructural properties of the specimens were calculated directly from the 3-D datasets and the mechanical properties of the specimens were determined. Our data demonstrate significant microarchitectural changes in the bisphosphonate-treated cancellous bone that was typically plate-like, denser, with thicker and more trabeculae compared with those of the controls. Consistent with architectural changes, the Young's moduli of cancellous bone increased in all three directions with the greatest increase in primary axial loading (cephalo-caudal) direction after treatment. Our results suggest a bone remodeling-adaptation mechanism stimulated by bisphosphonates that increases bone volume fraction, thickens trabeculae, changes trabeculae towards more plate-like, and increases mechanical properties. The secondary degree of anisotropy contributed significantly to the explained variance in bone strength, and the primary or tertiary degree of anisotropy improved the explanation of variances for Young's moduli, i.e., 79% of strength variances or 74-83% of modulus variances could be explained by the combined anisotropy and bone volume fraction. These significant improvements of cancellous bone architecture provide a rationale for the clinical observation that fracture risk decreased by 50% in the first year of bisphosphonate therapy with only a 5% increase in bone mineral density. We conclude that bisphosphonates enhance mechanical properties and reduce fracture risk by improving architectural anisotropy of cancellous bone 3-D microarchitecture.

Reduced mechanical load decreases the density, stiffness, and strength of cancellous bone of the mandibular condyle

OBJECTIVE

To investigate the influence of decreased mechanical loading on the density and mechanical properties of the cancellous bone of the human mandibular condyle.

DESIGN

Destructive compressive mechanical tests were performed on cancellous bone specimens.Background. Reduced masticatory function in edentate people leads to a reduction of forces acting on the mandible. As bone reacts to its mechanical environment a change in its material properties can be expected.

METHODS

Cylindrical bone specimens were obtained from dentate and edentate embalmed cadavers. Mechanical parameters were determined in the axial and in the transverse directions. Subsequently, density parameters were determined according to a method based on Archimedes' principle.

RESULTS

The apparent density and volume fraction of the bone were about 18% lower in the edentate group; no age-related effect on density was found. The decrease of bone in the edentate group was associated with a lower stiffness and strength (about 22% and 28%, respectively). The ultimate strain, however, did not differ between the two groups. Both groups had similar mechanical anisotropy; in axial loading the bone was stiffer and stronger than in transverse loading.

CONCLUSIONS

Reduced mechanical load had affected the density and herewith the mechanical properties of condylar cancellous bone, but not its anisotropy.

RELEVANCE

The change in material properties of the cancellous bone after loss of teeth indicate that the mandibular condyle is sensitive for changes in its mechanical environment. Therefore, changes in mechanical loading of the condyle have to be accounted for in surgical procedures of the mandible.

A comparative dosimetric study on tangential photon beams, intensity-modulated radiation therapy (IMRT) and modulated electron radiotherapy (MERT) for breast cancer treatment

Recently, energy- and intensity-modulated electron radiotherapy (MERT) has garnered a growing interest for the treatment of superficial targets. In this work. we carried out a comparative dosimetry study to evaluate MERT, photon beam intensity-modulated radiation therapy (IMRT) and conventional tangential photon beams for the treatment of breast cancer. A Monte Carlo based treatment planning system has been investigated, which consists of a set of software tools to perform accurate dose calculation, treatment optimization, leaf sequencing and plan analysis. We have compared breast treatment plans generated using this home-grown treatment optimization and dose calculation software forthese treatment techniques. The MERT plans were planned with up to two gantry angles and four nominal energies (6, 9, 12 and 16 MeV). The tangential photon treatment plans were planned with 6 MV wedged photon beams. The IMRT plans were planned using both multiple-gantry 6 MV photon beams or two 6 MV tangential beams. Our results show that tangential IMRT can reduce the dose to the lung, heart and contralateral breast compared to conventional tangential wedged beams (up to 50% reduction in high dose volume or 5 Gy in the maximum dose). MERT can reduce the maximum dose to the lung by up to 20 Gy and to the heart by up to 35 Gy compared to conventional tangential wedged beams. Multiple beam angle IMRT can significantly reduce the maximum dose to the lung and heart (up to 20 Gy) but it induces low and medium doses to a large volume of normal tissues including lung, heart and contralateral breast. It is concluded that MERT has superior capabilities to achieve dose conformity both laterally and in the depth direction, which will be well suited for treating superficial targets such as breast cancer.

Particle in cell simulation of laser-accelerated proton beams for radiation therapy

In this article we present the results of particle in cell (PIC) simulations of laser plasma interaction for proton acceleration for radiation therapy treatments. We show that under optimal interaction conditions protons can be accelerated up to relativistic energies of 300 MeV by a petawatt laser field. The proton acceleration is due to the dragging Coulomb force arising from charge separation induced by the ponderomotive pressure (light pressure) of high-intensity laser. The proton energy and phase space distribution functions obtained from the PIC simulations are used in the calculations of dose distributions using the GEANT Monte Carlo simulation code. Because of the broad energy and angular spectra of the protons, a compact particle selection and beam collimation system will be needed to generate small beams of polyenergetic protons for intensity modulated proton therapy.

Effects of short-term alendronate treatment on the three-dimensional microstructural, physical, and mechanical properties of dog trabecular bone

The bisphosphonate, alendronate, is well known for its potent inhibition of osteoclast-mediated bone resorption. It has been used clinically for the treatment of osteoporosis and has also recently been used to reduce osteolysis around prostheses in a canine revision model of implant loosening (femoral condyle). In this study, the effects of alendronate on trabecular bone properties were assessed in dogs at an oral dose of 0.5 mg/kg per day over a 12 week period, and compared with control dogs. Cubic cancellous bone specimens were produced from lumbar vertebrae (L-1 and L-2) and bilateral proximal humeri. These specimens were scanned using a high-resolution microcomputed tomography (micro-CT) system. From accurate data sets, three-dimensional microstructural properties were calculated and physical and mechanical properties were determined. Treatment with alendronate increased bone volume fraction by 9.5%, 7.7%, 7.4%, and 18.4%, respectively, in L-1, L-2, humeral greater tuberosity, and humeral head trabecular bone. In the lumbar vertebrae, the alendronate-treated trabeculae were thicker and lower in bone surface-to-volume ratio. In the greater tuberosity, the alendronate-treated trabeculae were thicker, lower in bone surface-to-volume ratio, and less anisotropic. In the humeral head, the alendronate-treated trabeculae were thicker, less anisotropic, lower in surface density, and showed decreased trabecular separation. Alendronate significantly increased apparent density and collagen density in the lumbar vertebrae and humeral heads, and significantly decreased collagen concentration in the vertebrae. In the lumbar vertebrae, Young's modulus in the cephalocaudal direction, ultimate stress, and failure energy were significantly increased in the alendronate-treated group. The changes in mechanical properties in the humeral head trabecular bone were similar to those seen in the lumbar vertebrae. Our results demonstrate that alendronate increases the mechanical properties of healthy canine trabecular bone after short-term treatment. The physical and microstructural changes of trabecular bone are consistent with the significantly increased mechanical properties.

Influence of hyperthyroidism on rat lung cytokine production and nuclear factor-kappaB activation following ozone exposure

Results from previous studies indicate that hyperthyroidism increases the risk of ozone-induced lung toxicity. To better understand the processes that might contribute to the increased pulmonary inflammatory response to ozone in hyperthyroidism, we evaluated bronchoalveolar lavage fluid levels of selected cytokines in control and hyperthyroid rats after exposure to air or ozone. In addition, we assessed whether there is a relative increase in nuclear factor-kappa B (NF-kappaB) binding activity in cells harvested by bronchoalveolar lavage from hyperthyroid rats following the inhalation of ozone. A hyperthyroid condition was induced by the administration of thyroxine (0.5 mg/kg body weight) for 7 days. Control rats received vehicle injections. The animals were then exposed by inhalation to air or ozone (2 ppm for 3 h) and studied 18 h following the exposure. Bronchoalveolar lavage levels of MIP-2 and MCP-1 were increased in both control and hyperthyroid rats by ozone exposure. However, the increases in hyperthyroid rats were much greater, MIP-2 1.5-fold and MCP-1 11-fold, when compared to levels in controls following ozone. These changes appeared to be relatively specific; bronchoalveolar lavage fluid levels of interleukin (IL)-6, IL-4, and IL-10 were generally low or nondetectable across all of the studied groups at the 18-h postexposure time point. We also found that NF-kappaB binding activity was increased at both 4 and 18 h following ozone exposure in bronchoalveolar lavage cell extracts from hyperthyroid rats relative to the activity in control samples. Collectively, these results suggest that mechanisms contributing to the enhanced pulmonary inflammatory response to ozone in a hyperthyroid state include an increase in NF-kappaB activation and an upregulation of chemokine production.

Mutual associations among microstructural, physical and mechanical properties of human cancellous bone

Previous studies have shown that low-density, rod-like trabecular structures develop in regions of low stress, whereas high-density, plate-like trabecular structures are found in regions of high stress. This phenomenon suggests that there may be a close relationship between the type of trabecular structure and mechanical properties.

In this study, 160 cancellous bone specimens were produced from 40 normal human tibiae aged from 16 to 85 years at post-mortem. The specimens underwent micro-CT and the microstructural properties were calculated using unbiased three-dimensional methods. The specimens were tested to determine the mechanical properties and the physical/compositional properties were evaluated.

The type of structure together with anisotropy correlated well with Young’s modulus of human tibial cancellous bone. The plate-like structure reflected high mechanical stress and the rod-like structure low mechanical stress. There was a strong correlation between the type of trabecular structure and the bone-volume fraction. The most effective microstructural properties for predicting the mechanical properties of cancellous bone seem to differ with age.

[A morphological study of human hair tips by scanning electronic microscope (SEM)]

Morphological characteristics of human hair tip was studied by SEM. It was concluded that human hair tips could be classified into eight types. The tip formation, distribution and changes after being trimmed were explored. This study can be used in the mechanism research of human hair growth and the forensic hair examination.

Measurement of the beam-helicity asymmetry in the p((-->)e,e'p)pi(0) reaction at the energy of the Delta(1232) resonance

In a p((-->)e,e'p)pi(0) out-of-plane coincidence experiment at the three-spectrometer setup of the Mainz Microtron MAMI, the beam-helicity asymmetry has been precisely measured around the energy of the Delta(1232) resonance and Q(2) = 0.2(GeV/c)(2). The results are in disagreement with three up-to-date model calculations. This is interpreted as a lack of understanding of the nonresonant background, which in dynamical models is related to the pion cloud.

Neutral pion threshold production at Q(2) = 0.05 GeV(2)/c(2) and chiral perturbation theory

New data are presented on the p(e,e'p)pi(0) reaction at threshold at a four-momentum transfer of Q(2) = 0.05 GeV(2)/c(2). The data were taken with the three-spectrometer setup of the A1 Collaboration at the Mainz Microtron MAMI. The complete center of mass solid angle was covered up to a center of mass energy of 4 MeV above threshold. Combined with measurements at three different values of the virtual photon polarization epsilon, the structure functions sigma(T), sigma(L), sigma(TT), and sigma(TL) are determined. The results are compared with calculations in heavy baryon chiral perturbation theory and with a phenomenological model. The measured cross section is significantly smaller than both predictions.