Transmission electron microscopy and theoretical analysis of AuCu nanoparticles: Atomic distribution and dynamic behavior

Though the application of bimetallic nanoparticles is becoming increasingly important, the local atomistic structure of such alloyed particles, which is critical for tailoring their properties, is not yet very clearly understood. In this work, we present detailed study on the atomistic structure of Au-Cu nanoparticles so as to determine their most stable configurations and the conditions for obtaining clusters of different structural variants. The dynamic behavior of these nanoparticles upon local heating is investigated. AuCu nanoparticles are characterized by high resolution transmission electron microscopy (HRTEM) and energy filtering elemental composition mapping (EFECM), which allowed us to study the internal structure and the elemental distribution in the particles. Quantum mechanical approaches and classic molecular dynamics methods are applied to model the structure and to determine the lowest energy configurations, the corresponding electronic structures, and understand structural transition of clusters upon heating, supported by experimental evidences. Our theoretical results demonstrate only the core/shell bimetallic structure have negative heat of formation, both for decahedra and octahedral, and energetically favoring core/shell structure is with Au covering the core of Cu, whose reverse core/shell structure is not stable and may transform back at a certain temperature. Experimental evidences corroborate these structures and their structural changes upon heating, demonstrating the possibility to manipulate the structure of such bimetallic nanoparticles using extra stimulating energy, which is in accordance with the calculated coherence energy proportions between the different configurations.

Dental fluorosis in primary teeth: a study in rural schoolchildren in Shaanxi Province, China

OBJECTIVE

The aim of this study was to assess the prevalence and severity of fluorosis in the primary dentition of 7-8-year-old Chinese schoolchildren in areas with fluoride concentrations in the drinking water ranging from 0.35 to 7.6 mg L-).

SUBJECTS AND METHODS

Four hundred and seventy-two children from 13 different schools were divided into four groups according to the fluoride concentration of the drinking water: (A) <or=1.0 mg L-1; (B) 1.1-2.0 mg L-1; (C) 2.1-3.8 mg L-1; and (D) 7.6 mg L-1. Clinical examinations were made under field conditions, and dental fluorosis on the buccal surfaces of all teeth was recorded using the Thylstrup-Fejerskov Index (TFI).

RESULTS

The prevalence of dental fluorosis in primary teeth varied from 6.2% to 96.6% according to the fluoride concentration of the drinking water. The differences of median of TFI scores between all groups were statistically significant (P<0.001) except for groups B and C. No statistically significant difference in the severity of dental fluorosis was observed between genders. The second primary molars were most severely affected by dental fluorosis. Disregarding group A, TFI scores between 3 and 4 were most frequently recorded. Dental fluorosis was symmetrically distributed in both jaws.

CONCLUSION

Dental fluorosis is prevalent in the primary teeth of children living in areas supplied with drinking water with fluoride concentrations higher than 1.0 mg L-1. The primary teeth may act as biomarkers of fluoride exposure. The examination of primary teeth may give an early warning of this condition, and thus, provide a basis for intervention to prevent dental fluorosis in the permanent teeth.

Computational biomechanical modelling of the lumbar spine using marching-cubes surface smoothened finite element voxel meshing

There is a need for the development of finite element (FE) models based on medical datasets, such as magnetic resonance imaging and computerized tomography in computation biomechanics. Direct conversion of graphic voxels to FE elements is a commonly used method for the generation of FE models. However, conventional voxel-based methods tend to produce models with jagged surfaces. This is a consequence of the inherent characteristics of voxel elements; such a model is unable to capture the geometries of anatomical structures satisfactorily. We have developed a robust technique for the automatic generation of voxel-based patient-specific FE models. Our approach features a novel tetrahedronization scheme that incorporates marching-cubes surface smoothing together with a smooth-distortion factor (SDF). The models conform to the actual geometries of anatomical structures of a lumbar spine segment (L3). The resultant finite element analysis (FEA) at the surfaces is more accurate compared to the use of conventional voxel-based generated FE models. In general, models produced by our method were superior compared to that obtained using the commercial software ScanFE.

Seven-Nanometer Hexagonal Close Packed Cobalt Nanocrystals for High-Temperature Magnetic Applications through a Novel Annealing Process

Seven-nanometer cobalt nanocrystals are synthesized by colloidal chemistry. Gentle annealing induces a direct structural transition from a low crystalline state to the hexagonal close packed (hcp) phase without changing the size, size distribution, and the lauric acid passivating layer. The hcp structured nanocrystals can be easily redispersed in solvent for further application and processing. We found that the magnetization at saturation and the magnetic anisotropy are strongly modified through the annealing process. Monolayer self-assembly of the hcp cobalt nanocrystals is obtained, and due to the dipolar interaction, ferromagnetic behavior close to room temperature has been observed. This work demonstrates a novel approach for obtaining small size hcp structured cobalt magnetic nanocrystals for many technological applications.

Seedling and Adult Plant Resistance to Powdery Mildew in Chinese Bread Wheat Cultivars and Lines

Powdery mildew, caused by Blumeria graminis f. sp. tritici, is a widespread wheat disease in China. Identification of race-specific genes and adult plant resistance (APR) is of major importance in breeding for an efficient genetic control strategy. The objectives of this study were to (i) identify genes that confer seedling resistance to powdery mildew in Chinese bread wheat cultivars and introductions used by breeding programs in China and (ii) evaluate their APR in the field. The results showed that (i) 98 of 192 tested wheat cultivars and lines appear to have one or more resistance genes to powdery mildew; (ii) Pm8 and Pm4b are the most common resistance genes in Chinese wheat cultivars, whereas Pm8 and Pm3d are present most frequently in wheat cultivars introduced from CIMMYT, the United States, and European countries; (iii) genotypes carrying Pm1, Pm3e, Pm5, and Pm7 were susceptible, whereas those carrying Pm12, Pm16, and Pm20 were highly resistant to almost all isolates of B. graminis f. sp. tritici tested; and (iv) 22 genotypes expressed APR. Our data showed that the area under the disease progress curve, maximum disease severity on the penultimate leaf, and the disease index are good indicators of the degree of APR in the field. It may be a good choice to combine major resistance genes and APR genes in wheat breeding to obtain effective resistance to powdery mildew.

Synthesis of bimetallic nanoshells by an improved electroless plating method

In the Letter, we demonstrate an improved electroless plating method for the synthesis of bimetallic shell particles. The procedure involves a combination of surface reaction, seeding growth, and removal of supporting cores. We modified ammonical AgNO3 in ethanol with a controlled amount of HCHO in the seeding process and a uniform and relatively dense coverage of silver nanoparticle seeds on colloid cores was achieved. Following the second kind of metal plating, we extended this method to prepare continuous bimetallic core-shell and hollow particles with a submicrometer diameter. The morphologies of the bimetallic Cu/Ag and Pt/Ag particles were studied with transmission electron microscopy and scanning electron microscopy, and their crystallinity and chemical composition were confirmed by X-ray diffraction. The prepared materials may be of applied value in areas such as catalysis, optics, and plasmonics.

An X-ray nanodiffraction technique for structural characterization of individual nanomaterials

An X-ray micro/nanodiffraction technique that allows structural characterization of individual nanomaterials has been developed at an insertion-device beamline of the Advanced Photon Source. Using the extremely high brightness of the third-generation synchrotron radiation source and advanced high-resolution high-energy zone-plate focusing optics, X-rays of energies from 6 to 12 keV have been focused into a spot smaller than 200 nm with a photon density gain of more than 50,000 so that significant photon flux can be intercepted by a nanoscale material to generate a measurable diffraction signal for structural characterization. This paper describes the instrumentation of the technique and discusses the application of the technique to studies of tin oxide nanobelts.

Preparation of metallodielectric composite particles with multishell structure

In this article, we demonstrated the synthesis of metallodielectric composite particles comprising a metal shell on a dielectric core and an outer coating of an insulating dielectric layer by depositing silver on silica supporting cores followed by coating of titania. A combination of surface reaction and surface seeding techniques is exploited for the formation of a complete silver shell on silica spheres. The additional outer coating of titania on silver shell particles is then performed by hydrolyzing tetra-n-butyl titanate in ethanol at room temperature. The morphologies of silver shells and titania coating are studied with electron microscopy, and their existences are confirmed with X-ray diffraction and energy-dispersive X-ray measurement.

Molecular tagging and genetic mapping of the disease resistance gene RppQ to southern corn rust

Southern corn rust (SCR), Puccinia polysora Underw, is a destructive disease in maize ( Zea mays L.). Inbred line Qi319 is highly resistant to SCR. Results from the inoculation test and genetic analysis of SCR in five F(2) populations and five BC(1)F(1 )populations derived from resistant parent Qi319 clearly indicate that the resistance to SCR in Qi319 is controlled by a single dominant resistant gene, which was named RppQ. Simple sequence repeat (SSR) analysis was carried out in an F(2) population derived from the cross "Qi319x340". Twenty SSR primer pairs evenly distributed on chromosome10 were screened at first. Out of them, two primer pairs, phi118 and phi 041, showed linkage with SCR resistance. Based on this result, eight new SSR primer pairs surrounding the region of primers phi118 and phi 041 were selected and further tested regarding their linkage relation with RppQ. Results indicated that SSR markers umc1,318 and umc 2,018 were linked to RppQ with a genetic distance of 4.76 and 14.59 cM, respectively. On the other side of RppQ, beyond SSR markers phi 041 and phi118, another SSR marker umc1,293 was linked to RppQ with a genetic distance of 3.78 cM. Because the five linkage SSR markers (phi118, phi 041, umc1,318, umc 2,018 and umc1,293) are all located on chromosome 10, the RppQ gene should also be located on chromosome 10. In order to fine map the RppQ gene, AFLP (amplified fragment length polymorphism) analysis was carried out. A total 54 AFLP primer combinations were analyzed; one AFLP marker, AF1, from the amplification products of primer combination E-AGC/M-CAA, showed linkage with the RppQ gene in a genetic distance of 3.34 cM. Finally the RppQ gene was mapped on the short arm of chromosome 10 between SSR markers phi 041 and AFLP marker AF1 with a genetic distance of 2.45 and 3.34 cM respectively.

Induced growth of asymmetric nanocantilever arrays on polar surfaces

We report that the Zn-terminated ZnO (0001) polar surface is chemically active and the oxygen-terminated (000(-)1) polar surface is inert in the growth of nanocantilever arrays. Longer and wider "comblike" nanocantilever arrays are grown from the (0001)-Zn surface, which is suggested to be a self-catalyzed process due to the enrichment of Zn at the growth front. The chemically inactive (0001;)-O surface typically does not initiate any growth, but controlling experimental conditions could lead to the growth of shorter and narrower nanocantilevers from the intersections between (000(-)1)-O with +/- (01(-)10) surfaces.

Antisense oligonucleotide against 47-kDa heat shock protein (Hsp47) inhibits wound-induced enhancement of collagen production

It is well known that excessive collagen synthesis during the wound-healing process causes scar formation. Our recent in-vivo study indicates that antisense treatment against 47-kDa heat shock protein (Hsp47), a collagen-specific molecular chaperone, relieves scar formation following skin wounds in rats [Wang et al., Plast. Reconstr. Surg., in press]. In order to understand the mechanism of this phenomenon, we examined the effects of antisense treatment on the expression of mRNAs and proteins of Hsp47 and collagens in fibroblasts derived from wounded rat tongues. Hsp47 and procollagen alpha1(I) and alpha1(III) mRNAs were consistently increased after wounding and were maximal at day 5 post-injury. Treatment with antisense oligonucleotide against Hsp47 efficiently blocked the production of procollagen alpha2(I) and alpha1(III) proteins, but had little effect on their mRNA levels. Therefore, we conclude that antisense oligonucleotide against Hsp47 inhibits the production of procollagen type I and III proteins in fibroblasts derived from wounded tongues, overcoming the increase in their mRNAs.

[The expression of fusion protein GST-GP302 in E.coli and its preparation of rabbit anti-serum]

AIM

To express fusion protein of GST and vWf binding domain(GP302) of platelet GPIbalpha in E.coli and its preparation of rabbit anti-serum.

METHODS

GP302 gene was inserted into pGEX-4T-1. The recombinant vector was identificated by restriction endonuclease digestion analysis. Fusion protein GST-GP302 was expressed in E.coli via IPTG induction. The rabbit antibody against GST-GP302 was prepared by using renatured GST-GP302 as immuneogen and the specificity of polyclonal antibody was identified by Western blot.

RESULTS

The restriction endonuclease digestion analysis of recombinant plasmid demonstrated that the GP302 gene had been exactly inserted into pGEX-4T-1. SDS-PAGE analysis showed that the ralative molecular mass(M(r)) of the fusion protein was about 59 000. ELISA analysis proved that the titer of rabbit serum against GST-GP302 was 10(-5). The polyclonal antibody specifically bound to purified platelet GPIbalpha.

CONCLUSION

The preparation of polyclonal antibody against GP302 peptide provides an usefal reagent for the detection of platelet GPIbalpha.

Synthesis and thermoelectric power of nitrogen-doped carbon nanotubes

We have previously shown that high-purity multiwalled carbon nanotubes (pristine MWNTs) can be prepared from a mixture of xylene-ferrocene (99 at% C:1 at% Fe) inside a quartz tube reactor operating at approximately 700 degrees C. In a similar process, approximately 3 g of melamine (C3H6N6) was introduced during the growth of MWNTs to prepare nitrogen-doped nanotubes. The structural and electronic properties of nitrogen-doped MWNTs were determined by scanning electron microscopy, high-resolution transmission electron microscopy (HRTEM), electron energy loss spectroscopy (EELS), and thermopower measurements. The individual nitrogen-doped nanotube exhibits a bamboo-like structure and comprises 6-16 tube walls, as evidenced by HRTEM studies. The EELS measurements yielded an average nitrogen content of approximately 5 at% in the doped tubes. The thermoelectric power data of nitrogen-doped MWNTs remained negative even after exposure to oxygen for an extended period of time, suggesting that nitrogen doping of MWNTs renders them n-type, consistent with scanning tunneling spectroscopic studies on similar nanotubes.

Bilateral chylothorax following radical neck dissection

Bilateral chylothorax as a complication of radical neck dissection is extremely rare, but it is potentially serious and sometimes fatal. We found only 14 cases reported in the English literature. Here, we report a case of bilateral chylothorax following right modified and left radical neck dissections that was successfully treated with conservative management.

Optical properties of inverted opal photonic band gap crystals with stacking disorder

We present a detailed study of the effect of planar stacking disorder on optical properties of inverted opal photonic crystals. Systems with periodic stacking sequences are first studied that include face centered cubic, hexagonal close-packed, and doubly hexagonal close-packed photonic crystals. For the structures with periodic stacking order, we evaluate the band structure followed by calculation of transmission spectrum along the direction perpendicular to the hexagonal close-packing plane of the structures. Inverted opal photonic crystals with random stacking sequences are then studied by calculating average transmittance of the photonic crystal slabs over various random stacking configurations. The position and width of the lowest stop gap along the direction normal to the hexagonal close-packing plane is found to be invariant, regardless of the stacking sequence in the photonic crystal. We show how the propagation properties at higher frequencies are affected by the stacking configurations (both periodic and disordered stacking sequences), particularly those near the edges of the absolute band gap. The obtained results are directly relevant to transmission/reflection experiments on inverted opal photonic crystals with complete band gap.

Structures of oxide nanobelts and nanowires

We have recently reported the synthesis of one-dimensional nanobelt structures of ZnO, SnO2, In2O3, CdO, Ga2O3, and PbO2 by evaporating the desired commercial metal oxide powders at high temperatures (Science (2001), 291, 1947). The as-synthesized oxide nanobelts are pure, structurally uniform, single crystalline, and most of them free from dislocations. The beltlike morphology appears to be a unique and common structural characteristic for the family of semiconducting oxides. In the present article, we focus on the twin and stacking fault planar defects found in oxide nanobelts and nanowires although they are rarely observed. Some interesting and unique growth morphologies are presented to illustrate the roles played by surface energy and kinetics in growth. It is shown that the surfaces of the oxide nanobelts are enclosed by the low-index, low-energy crystallographic facets. The growth morphology is largely dominated by the growth kinetics.

Raman studies of semiconducting oxide nanobelts

Crystalline nanobelts of ZnO and SnO2 were prepared from a thermal evaporation of oxide powders inside an alumina tube in the absence of catalysts. Typical dimensions of the nanobelt samples ranged from approximately 10 to 100 microns in length, 30 to 300 nm in width, and 6 to 30 nm in thickness. Room temperature Raman spectra were obtained on pressed mats of nanobelt samples and compared with the corresponding spectra of the starting oxide powders and bulk materials. Collectively, our Raman data indicated that the as-prepared nanobelt samples used in this study were oxygen deficient. Upon annealing at 900 degrees C in flowing oxygen for 1 h, the nanobelt samples exhibited Raman features that corresponded to those expected in respective bulk semiconducting oxides. The dimensions of the nanobelts were a bit too large to expect significant quantum size effects on the phonon structure similar to those observed in carbon nanotubes and short-period semiconductor superlattices.

Leptin prevents the fall in plasma osteocalcin during starvation in male mice

Plasma osteocalcin, a marker of osteoblastic activity, is reduced in starvation, malnutrition, and anorexia nervosa, resulting in low bone turnover osteoporosis. Contradictory findings about the role of leptin as a link between nutritional status and bone physiology have been reported. We demonstrate that leptin-deficient ob/ob and leptin-resistant db/db male mice have increased plasma osteocalcin, and that in male ob/ob mice osteocalcin is not decreased by starvation, unlike control mice. Intraperitoneal leptin administration increased plasma osteocalcin in male ob/ob mice, and prevented its fall during 24h fasting and 5 days of food restriction in normal male mice. This effect may be mediated via actions on the hypothalamic-pituitary-testicular or -growth hormone axes, or a direct action on osteoblasts. These studies support the hypothesis that the fall in leptin during starvation and weight loss is responsible for the associated reduction in osteoblast activity, and suggest a role for leptin in regulating bone turnover.

Collagen-binding heat shock protein HSP47 expression during healing of fetal skin wounds

Wounds in fetal animals are known to heal without scar formation, but the mechanism involved remains unclear. Scar tissue is characterized by disorganized collagen bundles. The 47-kDa heat shock protein (HSP47) is a molecular chaperone that specifically targets collagen processing. However, the role of HSP47 in scar formation is poorly understood. We studied the relation of HSP47 expression in skin to scar formation during fetal wound healing. Immunohistochemical analysis demonstrated HSP47-positive cells in the epidermal cell layer of fetal and neonatal rat skin and the absence of such cells in subcutaneous tissue. After induction of a wound on the back of fetal and neonatal rats, the message of collagen type I was increased only in neonatal skin but not in fetal skin. HSP47-positive cells consistently increased for 7 days after wound induction in neonatal rats. In contrast, HSP47-positive cells and HSP47 protein were unchanged in fetal rats. We conclude that the scarless healing of fetal skin wounds is related to lack of change in HSP47 expression. HSP47 may thus be an important determinant of scar formation during wound healing.

Analysis of Human Platelet Antigen Genotypic Frequencies in Chinese Population by PCR Amplification with Sequence Specific Primers

In present study, a method for genotyping for human platelet antigen (HPA) systems by means of the polymerase chain reaction amplification with sequence-specific primers (PCR-SSP) technique was developed and employed to determine the human platelet antigen frequencies in the Chinese population. Primers sets were designed to allow PCR amplification for five systems using the same assay conditions. Platelets from 110 random Chinese blood donors were typed for human platelet alloantigens HPA-1 to -5 by the method. The results showed that the HPA genotypic frequencies observed in the 110 donors were 0.91 and 0.09 for HPA-1a and HPA-1b, 0.86 and 0.14 for HPA-2a and HPA-2b, 0.60 and 0.40 for HPA-3a and HPA-3b, 0.92 and 0.08 for HPA-4a and HPA-4b, and 0.85 and 0.15 for HPA-5a and HPA-5b, respectively. In conclusion the method is feasible and practical and may be available to typing for HPA in the clinical laboratories.

Synthesis, crystal structure and properties of a new dinuclear manganese(III) complex: a mimic for catalase

A new dinuclear manganese (III) complex [(ac)Mn(bbml)(2)Mn(ac)] x (BF(4))(2) x 3.5H(2)O (Hbbml=[bis(2-benzimidazolylmethyl)amino]ethanol, Hac=acetic acid) was synthesized and characterized by several physical methods. X-ray structure analysis shows that the complex has a dimeric unit and the two Mn(III) atoms are bridged by the oxygen atoms of the two ligands, forming a bis (micro-alkoxo)dimanganese core. The Mn-Mn distance is 3.2103 A. Electrospray mass spectrometry (ES-MS) experiment shows that the complex cation may easily have lost one or two ac(-) and leave unoccupied coordination site which would favor the coordination and activation of hydrogen peroxide. Furthermore, its catalytic activity for the disproportionation of hydrogen peroxide and the effect of added heterocyclic base were also investigated. The complex has some similarities to manganese catalase in structure and activity.

[Effect of oxLDL on the uptake and clearance rate of cholesterol in vascular smooth muscle cells originated from human apoAI transgenic mice]

OBJECTIVE

Study on (1) inhibition of oxidized low density lipoprotein (oxLDL) effect on the uptake and clearance of intra-cellular 3H-cholesterol in vascular smooth muscle cells (v-SMC) originated from the human-apoAI transgenic mice (C57BL/6); (2) change of human-apolipoprotein AI (h-apoAI) mRNA expression in v-SMC after oxLDL stimulation and the protective effect of expressed h-apoAI on v-SMC against oxLDL intoxication.

METHODS

(1) v-SMC isolated from human apoAI transgenic mice possessing a recombined gene connected beforehand with a mouse metallothionein-I (MT-I) as the promoter; (2) study of h-apoAI mRNA expression from v-SMC of the transgenic mice by RT-PCR and Northern blot.

RESULTS

oxLDL (30 micrograms/ml) strongly promoted v-SMC proliferation. No difference found on 3H-cholesterol uptake between smooth muscle from normal mouse aorta (n-SMC) and smooth muscle cells from transgenic mouse aorta (tr-SMC) of the control groups, the uptake rates of both kinds of SMC rose 100% after oxLDL stimulation. The efflux rates of 3H-cholesterol in tr-SMC were much higher than those of n-SMC (40%-50%). After oxLDL stimulation, the clearance rates fell by 28% and 10% respectively for n-SMC and tr-SMC. The result of RT-PCR and Northern blot showed a marked increase of h-apoAI gene expression after oxLDL stimulation.

CONCLUSIONS

Expression of h-apoAI gene in C57BL/6 mice enables to decrease the accumulation of cholesterol in v-SMC. tr-SMC are capable to alleviate the harmful effect of oxLDL on v-SMC due to the increase of h-apoAI expression.

[Effect of mm-LDL on NF-kB activation in endothelial cell]

OBJECTIVE

To investigate the signal transduction pathway of NF-kB activated by minimally modified low density lipoprotein (mm-LDL) in endothelial cells and the effect of NF-kB on platelet derived growth factor b (PDGFb) mRNA expression.

METHODS

mm-LDL was prepared through iron oxidation by dialyzing the native LDL against FeSO4 in PBS. Endothelial cells were incubated in a medium containing mm-LDL, TNF, and IL-1 respectively and electrophoretic mobility shift assay (EMSA) was displayed to check on the activation of NF-kB. Luciferase reporter gene was analysed to investigate the effect of nuclear factor inducing kinase (NIK), inhibitor of NF-kB kinase alpha (IKK alpha) and inhibitor of NF-kB kinase beta (IKK beta) on NF-kB activation. In addition, endothelial cells were transfected using PDGFb promoter-luciferase for reporter gene analysis or transfected with mut-NIK for slot blot analysis to study the effect of NF-kB on PDGFb mRNA expression.

RESULTS

mm-LDL was able to activate NF-kB in endothelial cells. mut-NIK and mut-IKK beta inhibited luciferase activity induced by mm-LDL. mm-LDL could also enhance luciferase activity controlled by upstream sequence of PDGFb promoter which contains element interacting with NF-kB. Result of slot blot showed inhibition of PDGFb mRNA expression by mut-NIK in the endothelial cells stimulated by mm-LDL.

CONCLUSION

mm-LDL may activate NF-kB through NIK-IKK beta pathway and promote PDGFb mRNA expression in endothelial cells.

Pathological changes in human malignant carcinoma treated with high-intensity focused ultrasound

The purpose of this study was to investigate the pathologic changes of extracorporeal ablation of human malignant tumors with high-intensity focused ultrasound (HIFU). HIFU treatment was performed in the 164 patients with liver cancer, breast cancer, malignant bone tumor, soft tissue sarcoma and other malignant tumors at focal peak intensities from 5000 W x cm(-2) to 20,000 W x cm(-2), with operating frequencies of 0.8 to 3.2 MHz. To explore the pathologic impact of extracorporeal HIFU, 30 patients with malignant carcinoma underwent surgical removal after HIFU treatment. Pathologic findings showed that the treated tissues demonstrated homogeneous coagulative necrosis with an irreversible tumor cell death and severe damage to tumor blood vessels at the level of microsvasculature within the HIFU-targeted region. Thermolesions to intervening tissue were never observed. The treated region had a sharp border comprising only several cell layers between the treated and untreated areas. The repair of lesions had the processes of necrotic tissue absorption and granulation tissue replacement. It is concluded that extracorporeal treatment of human solid malignancies with HIFU could be safe, effective and feasible. As a noninvasive therapy, HIFU would be used clinically to treat patients with solid malignancies.

Selenium, iodine and fungal contamination in Yulin District (People's Republic of China) endemic for Kashin-Beck disease

We studied the status of selenium, iodine and fungal contamination in 353 school children (age 5-14 years) from four rural villages in the District of Yulin. In three villages Kashin-Beck disease (KBD) was endemic, whereas there were no cases of KBD in the fourth village. Clinical, biological and radiological examinations (right hand) were performed and KBD was established by X-ray diagnosis. The prevalence rate of KBD was 30.2%, 44.2% and 45.3% in the three endemic villages. Mean hair selenium and urine iodine concentrations were lower in affected than in unaffected children and fungal contamination in cereal grains stored in families with KBD was more elevated than in families without KBD. Low hair selenium concentration and presence of fungal cereal contamination were significantly associated with an increased risk of KBD, but low urine iodine was not.