Chemically-derived CuO/In2O3-based nanocomposite for diode applications

The potential of CuO-based nanocomposite synthesized through a facile surfactant-free wet chemical strategy has been demonstrated for photoelectronic applications.

To study the flow property of seven commercially available zinc oxide eugenol impression material at various time intervals after mixing

Aims and objective of the study was to evaluate the flow property of seven commercially available zinc oxide eugenol impression materials at various time intervals, after mixing 49 samples (seven groups) were fabricated for flow property of the material. The sample were fabricated as equal length of base and accelerator paste of the test materials was taken on the glass slab and mixed with a rigid stainless steel spatula as per manufacturers recommendation till the homogenous mix was obtained. The mix material was loaded in glass syringe and 0.5 ml material was injected on a cellophane sheet placed on marked glass plate. A cellophane sheet and glass plate 70 and 500 g weight was carefully placed on freshly dispensed zinc oxide eugenol impression paste sequentially. The diameter of the mix was noted after 30 s and 1 min of load application and also after the final set of material. The diameter gives the flow of material. The samples were stored at the room temperature. The data of the flow property was analyzed with analysis of variance, Post hoc test and t test. The flow of the zinc oxide eugenol impression paste after 30 s, 1 min and final set of load application for Group A to Group G was noted. Maximum flow was seen for Group G zinc oxide eugenol impression material followed by Group F, D, E, B, C and A in descending order respectively after 30 s, where as the flow property changed after 1 min in the sequence of maximum for Group G followed by Group E, D, B, A, C, and F. Lastly after final set of the impression material the flow maximum for Group G followed by Group E, D, C, F, A and B in descending order. Based on statistical analysis of the results and within in the limitations of this in-vitro study, the following conclusions were drawn that; the flow of zinc oxide eugenol impression material after 30 s, 1 min and that after the final set was maximum for P.S.P. (Group G) and the flow for PYREX (Group A) was minimum.

Spectroscopic (FT-IR, FT-Raman, NMR and UV-Visible) and quantum chemical studies of molecular geometry, Frontier molecular orbital, NLO, NBO and thermodynamic properties of salicylic acid

The solid phase FT-IR and FT-Raman spectra of 2-hydroxybenzoic acid (salicylic acid) have been recorded in the region 4000-400 and 4000-100 cm(-1) respectively. The optimized molecular geometry and fundamental vibrational frequencies are interpreted with the aid of structure optimizations and normal coordinate force field calculations based on density functional theory (DFT) method and a comparative study between Hartree Fork (HF) method at 6-311++G(d,p) level basis set. The calculated harmonic vibrational frequencies are scaled and they are compared with experimentally obtained FT-IR and FT-Raman spectra. A detailed interpretation of the vibrational spectra of this compound has been made on the basis of the calculated potential energy distribution (PED). The time dependent DFT method is employed to predict its absorption energy and oscillator strength. The linear polarizability (α) and the first order hyper polarizability (β) values of the investigated molecule have been computed. The electronic properties, such as HOMO and LUMO energies, molecular electrostatic potential (MEP) are also performed. Stability of the molecule arising from hyper conjugative interaction, charge delocalization has been analyzed using natural bond orbital (NBO) analysis.

Studies of the molecular geometry, vibrational spectra, frontier molecular orbital, nonlinear optical and thermodynamics properties of aceclofenac by quantum chemical calculations

The solid phase FT-IR and FT-Raman spectra of 2-[2-[2-[(2,6-dichlorophenyl)amino]phenyl]acetyl] oxyacetic acid (Aceclofenac) have been recorded in the region 4000-400 and 4000-100 cm(-1) respectively. The optimized molecular geometry and fundamental vibrational frequencies are interpreted with the aid of structure optimizations and normal coordinate force field calculations based on density functional theory (DFT) method and a comparative study between Hartree Fork (HF) method 6-311++G(d,p) level basis set. The calculated harmonic vibrational frequencies were scaled and have been compared with experimental by obtained FT-IR and FT-Raman spectra. A detailed interpretation of the vibrational spectra of this compound has been made on the basis of the calculated potential energy distribution (PED). The time dependent DFT method employed to study its absorption energy and oscillator strength. The linear polarizability (α) and the first order hyper polarizability (β) values of the investigated molecule have been computed. The electronic properties, such as HOMO and LUMO energies, molecular electrostatic potential (MESP) were also performed. Stability of the molecule arising from hyper conjugative interaction, charge delocalization has been analyzed using natural bond orbital (NBO) analysis.

Heat transfer performance of Al2O3/water nanofluids in a mini channel heat sink

The high density heat removal in electronic packaging is a challenging task of modern days. Finding compact, energy efficient and cost effective methods of heat removal is being the interest of researchers. In the present work, mini channel with forced convective heat transfer in simultaneously developing regime is investigated as the heat transfer coefficient is inversely proportional to hydraulic diameter. Mini channel heat sink is made from the aluminium plate of 30 mm square with 8 mm thickness. It has 15 mini channel of 0.9 mm width, 1.3 mm height and 0.9 mm of pitch. DI water and water based 0.1% and 0.2% volume fractions of Al2O3/water nanofluids are used as coolant. The flow rates of the coolants are maintained in such a way that it is simultaneously developing. Reynolds number is varied from 400 to 1600 and heat input is varied from 40 W to 70 W. The results showed that heat transfer coefficient is more than the heat transfer coefficient of fully developed flow. Also the heat transfer is more for nanofluids compared to DI water.

Thermal performance of ethylene glycol based nanofluids in an electronic heat sink

Heat transfer in electronic devices such as micro processors and power converters is much essential to keep these devices cool for the better functioning of the systems. Air cooled heat sinks are not able to remove the high heat flux produced by the today's electronic components. Liquids work better than air in removing heat. Thermal conductivity which is the most essential property of any heat transfer fluid can be enhanced by adding nano scale solid particles which possess higher thermal conductivity than the liquids. In this work the convective heat transfer and pressure drop characteristics of the water/ethylene glycol mixture based nanofluids consisting of Al2O3, CuO nanoparticles with a volume concentration of 0.1% are studied experimentally in a rectangular channel heat sink. The nano particles are characterized using Scanning Electron Microscope and the nannofluids are prepared by using an ultrasonic vibrator and Sodium Lauryl Salt surfactant. The experimental results showed that nanofluids of 0.1% volume concentration give higher convective heat transfer coefficient values than the plain water/ethylene glycol mixture which is prepared in the volume ratio of 70:30. There is no much penalty in the pressure drop values due to the inclusion of nano particles in the water/ethylene glycol mixture.

Turbulent heat transfer and pressure drop characteristics of dilute water based Al2O3-Cu hybrid nanofluids

A study on fully developed turbulent convective heat transfer and pressure drop characteristics of Al2O3-Cu/water hybrid nanofluid flowing through a uniformly heated circular tube is presented in this paper. For this, Al2O3-Cu nanocomposite powder was synthesized in a thermo chemical route using hydrogen reduction technique and dispersed the hybrid nano powder in deionised water to form a stable hybrid nanofluid of 0.1% volume concentration. The prepared powder was characterized by X-ray Diffraction (XRD) and Scanning Electron Microscope (SEM) to confirm the chemical composition, determine the particle size and study the surface morphology. Stability of the nanofluid was ensured by pH and zeta potential measurements. The average heat transfer enhancement for Al2O3-Cu/water hybrid nanofluid is 8.02% when compared to pure water. The experimental results also showed that 0.1% Al2O3-Cu/water hybrid nanofluids have slightly higher friction factor compared to 0.1% Al2O3/water nanofluid. The empirical correlations proposed for Nusselt number and friction factor were well agreed with the experimental data.

Laminar heat transfer and friction factor characteristics of carbon nano tube/water nanofluids

This paper presents an experimental investigation on the convective heat transfer and friction factor characteristics of CNT/water nanofluid through a circular tube fitted with helical screw tape inserts with constant heat flux under laminar flow condition. Nanofluids of 0.1% and 0.2% volume fractions are prepared by two step method. Thermo-physical properties like thermal conductivity and viscosity are measured by using KD2 thermal property analyzer and Brooke field cone and plate viscometer respectively. From the measurements, it is found that the viscosity increase is substantially higher than the increase in the thermal conductivity. The helical screw tape insets with twist ratios Y = 3, 2.44 and 1.78 are used to study the convective heat transfer and friction factor characteristics under laminar flow in the Reynolds number range of 520-2500. It is observed that, in a plain tube, maximum enhancement in Nusselt number for 0.1% and 0.2% volume fractions of nanofluids compared to pure water is 15% and 32% respectively. With the use of inserts, maximum enhancement in Nusselt number corresponding to twist ratios of 1.78, 2.44 and 3 are obtained as 8%, 16% and 4.6% for 0.1% volume fraction of nanofluid and 5%, 4% and 12% for 0.2% volume fraction of nanofluid when compared with water in plain tube. Thermal performance factor evaluation revealed that the values at all Reynolds number for all twist ratios and both concentration of CNT nanofluid are greater than unity which indicates that helical screw tape inserts with twist ratios considered are feasible in terms of energy saving in laminar flow.

Applications of regional anaesthesia in paediatrics

Advances in the field of paediatric regional anaesthesia have specific applications to both acute and chronic pain management. This review summarizes data regarding the safety of paediatric regional anaesthetic techniques. Current guidelines are provided for performing paediatric regional techniques, with a focus on applications for postoperative pain management. Brief descriptions of relevant anatomy followed by indications for commonly performed blocks are highlighted along with the potential of adverse side-effects.

Zinc–bromine hybrid flow battery: effect of zinc utilization and performance characteristics

The effect of zinc utilization and the performance characteristics in a zinc–bromine redox flow cell is reported. Simultaneously changing the quality of the electrolyte and the electrode substrate material resulted in an increase in the surface coverage with randomly oriented crystallographic (101) planes and, as a result, the cell exhibited higher Faradaic efficiency.