Evaluation of an image-based tracking workflow using a passive marker and resonant micro-coil fiducials for automatic image plane alignment in interventional MRI

In this paper, an original workflow is presented for MR image plane alignment based on tracking in real-time MR images. A test device consisting of two resonant micro-coils and a passive marker is proposed for detection using image-based algorithms. Micro-coils allow for automated initialization of the object detection in dedicated low flip angle projection images; then the passive marker is tracked in clinical real-time MR images, with alternation between two oblique orthogonal image planes along the test device axis; in case the passive marker is lost in real-time images, the workflow is reinitialized. The proposed workflow was designed to minimize dedicated acquisition time to a single dedicated acquisition in the ideal case (no reinitialization required). First experiments have shown promising results for test-device tracking precision, with a mean position error of 0.79 mm and a mean orientation error of 0.24°.

The safety and efficacy of early-stage bi-weekly alendronate to improve bone mineral density and bone turnover in chinese post-menopausal women at risk of osteoporosis

The efficacy and safety of early, low frequency antiresorptive drug intervention for osteopaenia on bone mineral density (BMD) and bone turnover in Chinese post-menopausal women at risk of developing osteoporosis were investigated. A total of 180 women aged 40 - 70 years were enrolled and equally randomized to receive either 70 mg alendronate once every 2 weeks plus 0.5 μg alfacalcidol daily (treatment group) or alfacalcidol 0.5 μg daily alone (control group) for 12 months. In the treatment group, lumbar spine and total hip BMD at 12 months had increased significantly from baseline and compared with the control group. There were also significant reductions in serum levels of the bone turnover biomarkers, bone-specific alkaline phosphatase and C-terminal telopeptide of type I collagen, compared with the control. No serious adverse events were observed in either group and safety profiles were similar. It was concluded that early intervention with 70 mg alendronate once every 2 weeks was safe, well tolerated and more effective than alfacalcidol alone (control) in increasing BMD and reducing bone turnover, and might prevent serious outcomes, such as fragility fractures, reduce rates of adverse effects and improve patient compliance.

First Report of Stem Blight of Eleocharis dulcis Caused by Phoma bellidis in China

Eleocharis dulcis is a perennial herbaceous plant in the family Cyperaceae, which is native to China and India where it grows well in moist-to-wet soils. It is commonly used as a fruit or a vegetable. From August 2009 to December 2010, symptoms were observed on E. dulcis stems in Tuanfeng County, Hubei, China, with the crop area affected estimated to be more than 1,300 ha per year. Corm yield was reduced by 20% on average with as much as 60% yield losses in some fields. Lesions were initially small, red-brown, and oval or circular that enlarged to produce apical necrosis and extending until the stems withered, usually within 2 months. To obtain isolates, diseased tissue was disinfested for 1 min in 0.1% mercuric chloride solution, rinsed with sterilized water, and plated on potato dextrose agar. Isolates with similar morphological characteristics were consistently recovered. Three isolates, CTF-3, CTF-10, and CTF-11, were used to further evaluate characteristics of the pathogen. After 7 days, white colonies were 76 to 80 mm across on oatmeal agar (OA) with sparse aerial hyphae and a slight salmon color in the conidial masses. Pycnidia produced on OA were globose to subglobose, usually with one slightly ostiolar papilla, olivaceous to olivaceous black, and 93 to 245 μm in diameter. Conidia were hyaline, unicellular, ellipsoidal, mostly with two polar guttules, and 3.6 to 6.2 × 2.0 to 3.3 μm. Chlamydospores were absent. Growth of the isolates on malt extract agar (MEA) was slower than on OA, and the colony diameters at 7 days were 60 to 65 mm. The reactions with 1M NaOH were both positive on OA and MEA where the cultures initially changed to yellow green and gradually turned to red. The pathogen was identified as Phoma bellidis Neerg. based on descriptions in Boerema et al. (2). Pathogenicity tests were performed with the three isolates in the laboratory by spraying conidial suspensions (1 × 10⁶ conidia/ml) containing 0.1% Tween 20 until runoff (30 ml per plant) onto stem surfaces of 50-day-old, 60 cm tall plants. For each isolate, there were 50 stems from five replicate plants that had multiple stems per plant. Control plants were treated with sterilized water containing 0.1% Tween 20 only. Plants were incubated with a 16-h photoperiod at 28°C and 90% relative humidity in an artificial climate chamber. Five days after inoculation, typical red-brown spots were observed on all inoculated stems but no symptoms were seen on water-treated control plants. Koch's postulates were fulfilled by reisolation of P. bellidis from diseased stems. The pathogenicity tests were repeated twice more with the same results. P. bellidis has only been reported previously on Bellis spp. from England, Denmark, Italy, the Netherlands, and Switzerland (1,2). Furthermore, there are only a few fungal diseases known to be associated with E. dulcis, and none so far that involve species of Phoma (3,4). To our knowledge, this is the first report of P. bellidis infecting E. dulcis worldwide. References: (1) M. M. Aveskamp et al. Stud. Mycol. 65:27, 2010. (2) G. H. Boerema et al. Phoma Identification Manual: Differentiation of Specific and Infra-Specific Taxa in Culture. CABI Publishing, Wallingford, UK, 2004. (3) P. L. Lentz. Am. Midl. Nat. 67:184, 1962. (4) L. Pan et al. J. Changjiang Vegetables (in Chinese) 14:10, 2010.

Permanent Genetic Resources added to the Molecular Ecology Resources Database 1 February 2010-31 March 2010

This article documents the addition of 228 microsatellite marker loci to the Molecular Ecology Resources Database. Loci were developed for the following species: Anser cygnoides, Apodemus flavicollis, Athene noctua, Cercis canadensis, Glis glis, Gubernatrix cristata, Haliotis tuberculata, Helianthus maximiliani, Laricobius nigrinus, Laricobius rubidus, Neoheligmonella granjoni, Nephrops norvegicus, Oenanthe javanica, Paramuricea clavata, Pyrrhura orcesi and Samanea saman. These loci were cross-tested on the following species: Apodemus sylvaticus, Laricobius laticollis and Laricobius osakensis (a proposed new species currently being described).

Energetics of Stone-Wales defects in 4 A carbon nanotubes

Density functional calculations have been performed to study the formation of Stone-Wales defects in 4 A single-wall carbon nanotubes, which were firstly synthesized inside the AFI zeolite template. The minimum energy paths from perfect tubes to defect-containing ones are calculated by the nudged elastic band method. It is found that the C--C bonds "along" the tube axis are more likely to be rotated than those bonds "around" the circumference. There is a marked chirality dependence of the formation barriers, which are found to be lower than that of graphite. Our results may raise a question on the origin of superconductivity observed in these 4 A tubes.

Electronic and electrochemical properties of Li-doped carbon nanotube-zeolite complex

The electronic and electrochemical properties of Li-doped carbon nanotube-zeolite complex are studied by first-principles calculations. There are four possible sites for Li to be doped and the reactions are all exothermic. The corresponding energy band structures follow a rigid band picture and there are charge transfers from Li to the nanotube and/or zeolite. The Li capacity of the complex can be reached to 386 mAh g(-1) with only a slight increase in the cell volume, and the complex may be of good cyclic stability during the charge and discharge process. Moreover, a higher voltage of about 4 V can be obtained if the complex is used in an Li-ion battery.

Generation of Janus alginate hydrogel particles with magnetic anisotropy for cell encapsulation

A microfluidic approach for fabrication of Janus hydrogel particles with magnetic anisotropy is demonstrated. Using this technique, cells and magnetic beads (MBs) can be separately embedded in one hydrogel particle to maintain optical performance, and reduce the contact between cells and magnetic beads (nano- or submicron-particles). Alginate cell capsules prepared by this method can be easily controlled and manipulated by external magnetic fields and require no specific surface modification. Bio-degradability and super-paramagnetic properties of these hydrogel particles were also demonstrated experimentally.