Effect of cryogenic treatment on nickel-titanium endodontic instruments

AIM

To investigate the effects of cryogenic treatment on nickel-titanium endodontic instruments. The null hypothesis was that cryogenic treatment would result in no changes in composition, microhardness or cutting efficiency of nickel-titanium instruments.

METHODOLOGY

Microhardness was measured on 30 nickel-titanium K-files (ISO size 25) using a Vicker's indenter. Elemental composition was measured on two instruments using X-ray spectroscopy. A nickel-titanium bulk specimen was analysed for crystalline phase composition using X-ray diffraction. Half of the specimens to be used for each analysis were subjected to a cryogenic treatment in liquid nitrogen (-196 degrees C) for either 3 s (microhardness specimens) or 10 min (other specimens). Cutting efficiency was assessed by recording operator choice using 80 nickel-titanium rotary instruments (ProFile 20, .06) half of which had been cryogenically treated and had been distributed amongst 14 clinicians. After conditioning by preparing four corresponding canals, each pair of instruments were evaluated for cutting efficiency by a clinician during preparation of one canal system in vitro. A Student's t-test was used to analyse the microhardness data, and a binomial test was used to analyse the observer choice data. Composition data were analysed qualitatively.

RESULTS

Cryogenically treated specimens had a significantly higher microhardness than the controls (P < 0.001; beta > 0.999). Observers showed a preference for cryogenically treated instruments (61%), but this was not significant (P = 0.21). Both treated and control specimens were composed of 56% Ni, 44% Ti, 0% N (by weight) with a majority in the austenite phase.

CONCLUSIONS

Cryogenic treatment resulted in increased microhardness, but this increase was not detected clinically. There was no measurable change in elemental or crystalline phase composition.

The ratios of individual chemicals in a mixture determine the degree of joint effect: the climax hypothesis

A new hypothesis, the Climax Hypothesis, is proposed to describe how the ratios of individual chemicals influence the joint effects of chemical mixtures. This hypothesis is derived from a generalized approach using "isobolograms". With this hypothesis, one can predict that for a given mixture, a curvilinear correlation exists between the joint effects and the ratios of individual chemicals and that this curve has a climax at the equitoxic ratio. This prediction is supported by the observed toxicity to Vibrio fischeri of 18 mixtures (12 binary mixtures, 4 ternary mixtures, and 2 quaternary mixtures). With this prediction, the Climax Hypothesis has some promising applications such as controlling the discharge of effluents in environmental science, maximizing detoxifying effects in medicine, and optimizing combined pesticides in agriculture.

Electrochemical characterization of cast Ti-Hf binary alloys

This study characterized the electrochemical behavior of Ti-Hf binary alloys in a simulated oral environment. Ti-Hf alloys (10, 20, 25, 30, 35 and 40 mass% Hf) were prepared by arc-melting titanium sponge and hafnium sponge. Specimens of each alloy (n = 4) were prepared using a dental titanium casting system with a MgO-based investment. Specimens were inspected with X-ray radiography to ensure minimal internal porosity. Castings (n = 4) made from pure titanium and commercially pure titanium were used as controls. The ground flat surface (10 mm x 10 mm) on each specimen where approximately 30 microm was removed was used for the characterization. Sixteen-hour open-circuit potential (OCP) measurement, linear polarization and potentiodynamic cathodic polarization were performed sequentially in aerated (air + 10% CO2) MTZ synthetic saliva at 37 degrees C. Potentiodynamic anodic polarization was conducted in the same medium but deaerated (N2 + 10% CO2) 2 h before and during testing. Polarization resistance (R(P)) and Tafel slopes were determined, as were corrosion current density (I(CORR)) and passive current density (I(PASS)). Results were subjected to nonparametric statistical analysis (alpha = 0.05). The OCP stabilized (mean values -229 mV to -470 mV vs. SCE) for all specimens after the 16-h immersion. Similar passivation was observed for all the metals on their anodic polarization diagrams. The Kruskal-Wallis test showed significant differences in OCP among the test groups (p = 0.006). No significant differences were found in R(P), I(CORR) or I(PASS) among all the metals (p>0.3). Results indicate that the electrochemical behavior of the Ti-Hf alloys examined resembles that of pure titanium.

Identification of a novel insulin-like growth factor binding protein gene homologue with tumor suppressor like properties

Here we report the identification of a new insulin-like growth factor binding protein homologue, provisionally designated insulin-like growth factor binding related protein-4 (IGFBP-rP4). IGFBP-rP4 was found to be most closely related to IGFBP-7 with 52% amino acid homology and 43% amino acid identity, and shares a similar domain structure. Semi-quantitative RT-PCR expression analysis demonstrated a pattern of downregulation of this gene in multiple tumor samples including lung and colon cancer, compared to matched adjacent normal tissue. Western blotting revealed a protein of approximately 38kDa expressed in both the cell pellet and secreted into the supernatant of transiently transfected Cos-7 cells. Cos-7 supernatants containing IGFBP-RP4 protein were observed to suppress the growth of HeLa cells in culture compared to vector controls. IGFBP-RP4 directly transiently transfected into HeLa cells also further confirmed the growth suppressive properties of this protein. Together these data suggest that IGFBP-RP4 may be a novel putative tumor suppressor protein.

Minocycline attenuates lipopolysaccharide-induced white matter injury in the neonatal rat brain

Our previous studies have shown that intracerebral administration of endotoxin, lipopolysaccharide (LPS), induces selective white matter injury and hypomyelination in the neonatal rat brain and that the LPS-induced brain injury is associated with activation of microglia. To test the hypothesis that inhibition of microglial activation may protect against LPS-induced white matter injury, we examined roles of minocycline, a putative suppressor of microglial activation, on LPS-induced brain injury in the neonatal rat. A stereotactic intracerebral injection of LPS (1 mg/kg) was performed in postnatal day 5 Sprague-Dawley rats and control rats were injected with sterile saline. Minocycline (45 mg/kg) was administered intraperitoneally 12 h before and immediately after LPS injection and then every 24 h for 3 days. Inflammatory responses, activation of microglia and brain injury were examined 1 and 3 days after LPS injection. LPS injection resulted in brain injury in selective brain areas, including bilateral ventricular enlargement, cell death at the sub- and periventricular areas, loss of O4+ and O1+ oligodendrocyte (OL) immunoreactivity and hypomyelination, as indicated by decreased myelin basic protein immunostaining, in the neonatal rat brain. Minocycline administration significantly attenuated LPS-induced brain injury in these rat brains. The protective effect of minocycline was associated with suppressed microglial activation as indicated by the decreased number of activated microglial cells following LPS stimulation and with consequently decreased elevation of interleukin 1beta and tumor necrosis factor-alpha concentrations induced by LPS and a reduced number of inducible nitric oxide synthase expressing cells. Protection of minocycline was also linked with the reduction in LPS-induced oxidative stress, as indicated by 4-hydroxynonenal positive OLs. The overall results suggest that reduction in microglial activation may protect the neonatal brain from LPS-induced white matter injury and inhibition of microglial activation might be an effective approach for the therapeutic treatment of infection-induced white matter injury.

An X-ray nanodiffraction technique for structural characterization of individual nanomaterials

An X-ray micro/nanodiffraction technique that allows structural characterization of individual nanomaterials has been developed at an insertion-device beamline of the Advanced Photon Source. Using the extremely high brightness of the third-generation synchrotron radiation source and advanced high-resolution high-energy zone-plate focusing optics, X-rays of energies from 6 to 12 keV have been focused into a spot smaller than 200 nm with a photon density gain of more than 50,000 so that significant photon flux can be intercepted by a nanoscale material to generate a measurable diffraction signal for structural characterization. This paper describes the instrumentation of the technique and discusses the application of the technique to studies of tin oxide nanobelts.

Direct block of the cystic fibrosis transmembrane conductance regulator Cl(-) channel by niflumic acid

Niflumic acid is widely used to inhibit Ca(2+) -activated Cl(-) channels. However, the chemical structure of niflumic acid resembles that of diphenylamine-2-carboxylate, a drug that inhibits the cystic fibrosis transmembrane conductance regulator (CFTR) Cl(-) channel. To investigate how niflumic acid inhibits CFTR Cl(-) channel, we studied recombinant wild-type human CFTR in excised inside-out membrane patches. When added to the intracellular solution, niflumic acid caused a concentration- and voltage-dependent decrease of CFTR Cl(-) current with half-maximal inhibitory concentration (K(i)) of 253 microM and Hill co-efficient of approximately 1, at -50 mV. Niflumic acid inhibition of single CFTR Cl(-) channels was characterized by a very fast, flickery block that decreased dramatically current amplitude without altering open-probability. Consistent with these data, spectral analysis of CFTR Cl(-) currents suggested that channel block by niflumic acid was described by the closed <--> open <--> blocked kinetic scheme with blocker on rate (k(on)) = 13.9 x 10(6) M(-1)s(-1), off rate (k(off))=3348 s(-1) and dissociation constant (K(d)) = 241 microM, at -50 mV. Based on these data, we tested the effects of niflumic acid on transepithelial Cl(-) secretion and cyst growth using type I MDCK epithelial cells. Niflumic acid (200 microM) inhibited cAMP-stimulated, bumetanide-sensitive short-circuit current by 55%. Moreover, the drug potently retarded cyst growth. We conclude that niflumic acid is an open-channel blocker of CFTR that inhibits Cl(-) permeation by plugging the channel pore. It or related agents might be of value in the development of new therapies for autosomal dominant polycystic kidney disease.

Prevention of murine acute graft-versus-host disease by recipient-derived TGFβ1-treated dendritic cells

Acute graft-versus-host disease (GVHD) remains the major barrier to allogeneic bone marrow transplantation (allo-BMT). Evidence has accumulated that transforming growth factor beta1-treated dendritic cells (TGFbeta-DC), deficient in surface costimulatory molecules, inhibit alloantigen-specific T-cell responses and induce graft hyporeactivity. To analyze the effect of TGFbeta-DC on GVHD after allo-BMT, 5.0 x 10(6) recipient-derived TGFbeta-DC were injected into C57BL/6 (H-2b) with bone marrow-splenocyte grafts from major histocompatibility complex (MHC) disparate BALB/c mice (H-2d). Survival analysis showed TGFbeta-DC cotransplantation resulted in significant prolongation of allograft survival, namely a mean survival time (MST) of 44.3 +/- 4.5 days, versus the untreated MST of 9.5 +/- 0.6 days (P < .01). However, mature DC aggravated the GVHD with an MST of 6.6 +/- 0.6 days (P < .01). In addition, the third-party C3H-derived TGFbeta-DC did not enhance the survival rate (MST = 9.7 +/- 0.5 days). Furthermore, serum IFN-gamma, IL-12, and IL-18 levels in TGFbeta-DC cotransplanted mice were reduced compared with untreated BMT hosts, while serum IL-10 levels were not changed. These results suggest that TGFbeta-DC cotransplantation may attenuate the severity of GVHD after BMT.

Cytotoxicity of commercial and novel binary titanium alloys with and without a surface-reaction layer

Titanium-based alloys form a surface reaction layer when cast. This study investigated the effect of the surface reaction layer on the cytotoxicity of novel Ti-based binary alloys. The cytotoxicities of the novel alloys were compared with commercially pure titanium, Ti-6Al-4V and Ti-6Al-7Nb. Cast discs with or without the reaction layer were first tested for cytotoxicity, then for elemental release into cell-culture medium. The elements released into the extracts were measured by means of an inductively coupled plasma atomic emission spectrometer. The commercial and novel binary Ti-based alloys showed no statistically significant cytotoxicity, although some trends were noted for several alloys. The presence of the reaction layer did not significantly alter the cytotoxicity. These favourable biocompatibility results show that these novel alloys have promise for use in dental restorations.

SEM/EDS evaluation of porcelain adherence to gold-coated cast titanium

The adhesion between titanium and dental porcelain is related to the diffusion of oxygen to the reaction layer formed on cast-titanium surfaces during porcelain firing. The diffusion of oxygen could be suppressed by coating the titanium surface with a thin gold layer. This study characterized the effects of gold coating on titanium-ceramic adhesion. ASTM grade II CP titanium was cast into a MgO-based investment (Selevest CB, Selec). The specimen surfaces were air abraded with 110-microm Al(2)O(3) particles. Gold coating was applied on titanium surfaces by three methods: gold-paste (Deck Gold NF, Degussa-Ney) coating and firing at 800 degrees C for three times, single gold-paste coating and firing followed by sputter coating (40 mA, 500 s), and sputter coating (40 mA, 1000 s). Surfaces only air abraded with Al(2)O(3) particles were used as controls. An ultra-low-fusing dental porcelain (Vita Titankeramik, Vident) was fused on titanium surfaces. Specimen surfaces were characterized by SEM/EDS and XRD. The titanium-ceramic adhesion was evaluated by a biaxial flexure test (N = 8), and area fraction of adherent porcelain (AFAP) was determined by EDS. Numerical results were statistically analyzed by one-way ANOVA and the Student-Newman-Keuls test at alpha = 0.05. SEM fractography showed a substantial amount of porcelains remaining on the gold-sputter-coated titanium surfaces. A new Au(2)Ti phase was found on gold-coated titanium surface after the firing. Significantly higher (p <.05) AFAP values were determined for the gold-sputter-coated specimens compared to the others. No significant differences were found among the other groups and the control. Results suggested that gold coatings used in this study are not effective barriers to completely protect titanium from oxidation during the porcelain firing, and porcelain adherence to cast titanium can be improved by gold-sputter coating used in the present study.

Leaching from solid waste incineration ashes used in cement-treated base layers for pavements

Waste incineration bottom ash and treated flue gas cleaning products mixed with 2.5% of cement (50 kg/m3) were tested in the laboratory in terms of compressive strength and tank leaching tests over a 64-day period. Although the material displayed lower mechanical strength than a reference concrete, the strength still was sufficient for use as a base layer for roads. The metal content in the incineration-residue-based specimens was up to 100 times higher than in the reference concrete, suggesting that the mixed waste incineration residue should be used only for dedicated purposes. The leaching of Cl and Na was increased by a factor of 20-100 from the incineration-residue-based specimens as compared to the reference, while the leaching of K, Ca and SO4 was increased by a factor of 2-10. The leaching of heavy metals was also higher from the incineration-residue-based specimens than from the reference with respect to Cu (50 times), Cd, Pb and Zn (5 times), but not with respect to Cr and Ni. The leaching curves did only allow for a closer evaluation of the leaching process in a few cases. The physical retention of the constituents seemed to be the same in the reference as in the incineration-residue-based specimens. Heavy metal leaching was limited by enhanced chemical retention in the incineration-residue-specimens as compared to the reference. Since no quality criteria in terms of leaching from a monolithic material are currently available, the leaching issue must be evaluated case by case.

Corrosion behavior of cast titanium with reduced surface reaction layer made by a face-coating method

This study characterized the corrosion behavior of cast CP titanium made with a face-coating method. Wax patterns were coated with oxide slurry of Y(2)O(3) or ZrO(2) before investing with a MgO-based investment. Three surface preparations were tested: ground, sandblasted, and as-cast. Uncoated castings served as controls. Sixteen-hour open circuit potential (OCP) measurement, linear polarization and potentiodynamic cathodic polarization were performed in an aerated modified Tani-Zucchi synthetic saliva at 37 degrees C. Anodic polarization was conducted in the same deaerated medium. Polarization resistance (R(p)) and Tafel slopes were determined. Corrosion current density was calculated for each specimen. Results (n=4) were subjected to nonparametric statistical analysis (alpha=0.05). Cross sections of cast specimens were examined by optical microscopy. Energy dispersive spectroscopy (EDS) spot analysis was performed at various depths below the surface. The OCP stabilized within several hours for all the specimens. Apparent differences in anodic polarization behavior were observed among the different surfaces. A distinctive wide passive region followed by breakdown was seen on specimens with ground and sandblasted surfaces. There were no significant differences in the corrosion resistance among the control and the two face-coating groups for each group. The Mann-Whitney test showed significantly lower OCP and higher R(p) values for ground surfaces. The surface condition significantly affected the corrosion behavior more than the face coating methods. In most cases, specimens with as-cast surfaces exhibited the least corrosion resistance during the potentiodynamic anodic polarization.

Vascular endothelial growth factor (VEGF) expression and the effect of exogenous VEGF on survival of a random flap in the rat

The induction of endogenous vascular endothelial growth factor (VEGF) production in the skin flap with ischemic injury and the effect of exogenous VEGF on survival of the ischemic skin flap were studied in rats. A dorsal flap model (3x10 cm(2)) was used in this study. In Part I, biopsies were taken from the flap at 2.5, 5.5, and 8.5 cm distances from the distal edge at 0, 6, 12, and 24 h after the flaps were sutured. Malonyldialdehyde (MDA) and VEGF(165) protein level were measured. In Part II, exogenous VEGF (1 microg/ml) was injected subdermally into the flaps in 14 rats before the flaps were replaced. Flaps that received a saline injection were used as the controls. The skin paddle survival was measured on postoperative day five. The results showed that the MDA level in the distal part of the flap significantly increased at 24 h postoperatively when compared to MDA in other parts of the flap. However, VEGF levels in the distal part of the flap significantly decreased when compared to the middle part of the flap. Subdermal injection of exogenous VEGF to the distal area of the flap could significantly improve survival of the distal flap (89% of total skin paddle) when compared to the control, which had a 64% mean percent survival. We conclude that production of endogenous VEGF protein is significantly increased in the skin flap with mild ischemia, but decreased in the flap with severe ischemia. Administration of exogenous VEGF could significantly enhance survival of ischemic flaps.

Measurement of the spatial coherence function of undulator radiation using a phase mask

A measurement of the horizontal coherence function of 7.9 keV radiation from an undulator beam line at the Advanced Photon Source is reported. X-ray diffraction from a phase-shifting mask was used, and the coherence function was measured as a function of the width of beam-conditioning slits in the beam line. The coherence distribution is found to be best described by a Lorentzian function.

The complete nucleotide sequence of Beet black scorch virus (BBSV), a new member of the genus Necrovirus

The complete nucleotide sequence of Beet black scorch virus (BBSV) was determined. The BBSV genome is composed of 3641 nucleotides and has similar organization with Tobacco necrosis virus D of 61% nucleotide identity. The 5'-proximal open reading frame (ORF) encodes a putative 23 kDa protein and a 82 kDa protein by reading-through of an amber termination codon. Three small ORFs located in the center of the genome may encode for a 4.2 kDa protein and two 7 kDa proteins. The 3'-proximal ORF encodes a 24.5 kDa protein equivalent in mass to the viral coat protein. Considering biological and molecular similarities with TNV, it is concluded that BBSV is a new member of the genus Necrovirus.

Realities of high-throughput liquid chromatography/mass spectrometry purification of large combinatorial libraries: a report on overall sample throughput using parallel purification

We report on the development of a validated, streamlined high-throughput process for the purification of parallel-synthesis-derived combinatorial libraries. The steps involved in this library purification process include dissolution of dry films of crude synthetic material, dual-column LC/MS purification, dual-column postpurification analysis, quantitation, reformatting, and submission of pure compounds for registration. Although the purification and postpurification analysis times decreased essentially linearly as a function of the number of HPLC columns employed, it was not possible to decrease the total purification process time linearly as a function of the number of columns employed in the system. This was due primarily to the fact that numerous steps in the total purification process are independent of sample analysis and purification (e.g., evaporation, reconstitution, and reformatting, etc.). Additionally, experiments were also performed to assess whether separate gradient pumps were necessary for each channel of this two-channel LC/MS or if acceptable results could be reliably obtained by splitting the flow from one set of gradient pumps between two HPLC columns. On the basis of the parallel, two-column LC/MS system employed in this work, throughput estimates were extrapolated to more massively parallel systems (e.g., four-channel LC/MS).

Observation of columnar microstructure in step-graded Si1-xGex/Si films using high-resolution X-ray microdiffraction

Columnar microstructure in step-graded Si(1-x)Ge(x)/Si(001) structures with low threading dislocation densities has been determined using high angular resolution (approximately 0.005 degrees ) x-ray microdiffraction. X-ray rocking curves of a 3-microm-thick strain-relaxed Si(0.83)Ge(0.17) film show many sharp peaks and can be simulated with a model having a set of Gaussians having narrow angular widths (0.013 degrees -0.02 degrees ) and local ranges of tilt angles varying from 0.05 degrees to 0.2 degrees. These peaks correspond to individual tilted rectangular columnar micrograins having similar (001) lattice spacings and average areas of 0.8 to 2.0 microm(2).

Accuracy of sampling methods in morphometric studies of human sural nerves

The aim of this study was to ascertain the minimum sample required to accurately measure the total number of myelinated fibres, mean myelinated fibre density (MFD), myelinated fibre diameter (Ds) and axonal diameter (Da) in morphometric studies of sural nerve biopsies. Measurements were obtained by sampling a single fascicle or systematic sampling of up to 50% of the total transverse fascicular area of two control and eighteen pathological sural nerves showing varying degrees of demyelination and axonal degeneration. MFD and fibre size were heterogeneous between fascicles in both control and pathological sural nerves, and morphometric results from one fascicle and systematic sampling of up to 50% of the total transverse fascicular area did not accurately represent the whole myelinated fibre population in the sural nerve. For accurate morphometric data it is necessary to quantitate all the myelinated fibres in the sural nerve.