A low sintering temperature and electrical performance of nanoparticle copper ink for use in ink-jet printing

Copper nanoparticles were successfully synthesized from copper chloride with various capping agents. The formation of copper nanoparticles was controlled by varying the species and concentration of the capping agents. The Cu nanoparticles were easily re-dispersed into n-tetradecane, and Cu films were prepared by solution deposition. The thin Cu films form a highly conducting film at low temperature via sintering due to the high surface area to volume ratio. The films were thermally treated at a range of temperatures and then their morphology and resistivity were analyzed. When the Cu films were sintered at 200 degrees C, their electrical resistivity was about 40 microomega. cm.

Influence of probiotics in different energy and nutrient density diets on growth performance, nutrient digestibility, meat quality, and blood characteristics in growing-finishing pigs

The study was conducted to determine the effects of probiotics (Bacillus subtilis endospore and Clostridium butyricum endospore complex) supplementation and different energy and nutrient densities on growth performance, nutrient digestibility, and meat quality in growing-finishing pigs. A total of 96 pigs with initial BW of 47.50 ± 1.14 kg were used in a 10-wk experiment. Pigs were randomly allotted to 1 of 4 treatments in a 2 × 2 factorial arrangement of treatments with 2 levels of energy and nutrient density (low and high energy, CP, and Lys) and 0.2% probiotics according to their sex and BW (6 pens, with 2 gilts and 2 barrows/pen). From 0 to 5 wk, ADG and G:F, as well as the apparent total tract digestibility (ATTD) of N and energy, were improved (P < 0.05) in the probiotic groups and in the high-energy and high-nutrient-density groups. From 6 to 10 wk, ADG and G:F, as well as the ATTD of DM, N, and energy, were increased (P < 0.01) when pigs were fed the high-energy and high-nutrient-density diets. Pigs fed the probiotic supplement or the high-energy and high-nutrient-density diets had increased (P < 0.01) ADG and G:F overall. Moreover, pigs fed the high-energy and high-nutrient-density diets had increased (P < 0.05) meat color scores, marbling scores, drip loss values, pH, and LM area (P < 0.05) compared with those fed the low-energy and low-nutrient-density diets, whereas the probiotic treatment groups had increased (P < 0.01) meat color scores, marbling scores, and redness values. The lightness and yellowness values in the low-energy and low-nutrient-density dietary treatments were greater (P < 0.05) than those in the high-energy and high-nutrient-density dietary treatments. Interactive effects of dietary energy and nutrient density and probiotics were also observed (P < 0.05) on the digestibility of N at wk 10 and energy at wk 5, as well as on meat firmness at the end of the experiment. In conclusion, dietary supplementation of probiotics increased growth performance throughout the experiment and exerted beneficial effects on ATTD. Meat quality was improved when pigs were fed high-energy and high-nutrient-density diets.

Application of one injection of prostaglandin F(2alpha) in the five-day Co-Synch+CIDR protocol for estrous synchronization and resynchronization of dairy heifers

The objective was to determine if the 5-d Co-Synch+CIDR (controlled internal drug releasing insert) protocol can be used in dairy heifers for a synchronized timed artificial insemination (TAI) with one injection of PGF(2alpha) for first and second services. In experiment 1, heifers were assigned randomly to receive 1 (n=295) or 2 (n=298) injections of PGF(2alpha) in the 5-d Co-Synch+CIDR protocol. Corpus luteum (CL) regression was measured in one replicate (n=218). No difference in pregnancy per TAI (P/TAI; 46.1 and 48.6%) or CL regression (86.9 and 92.8%) was detected for 1 versus 2 injections of PGF(2alpha), respectively. In experiment 2, nonpregnant heifers (n=86) were assigned to a resynchronized 5-d Co-Synch+CIDR with 1 PGF(2alpha)/TAI or insemination at detected estrus. There was no difference in P/TAI (52.2 and 55%) between groups. In experiment 3, nonpregnant heifers (n=110) were assigned randomly to receive a CIDR (n=54) or no CIDR insert (n=56) in the 5-d Co-Synch protocol for resynchronization of TAI. Pregnancy per TAI was lower without the CIDR device (39.3 vs. 51.8%). In a commercial field evaluation, 416 heifers were synchronized for the first and resynchronized TAI with the 5-d Co-Synch+CIDR protocol with 1 injection of PGF(2alpha). Pregnancy per TAI on d 60 was 58.2 and 47.5% for first and second TAI, respectively; there was a sire effect to the second TAI. In conclusion, the 5-d Co-Synch+CIDR protocol with 1 injection of PGF(2alpha) is an effective reproductive management program for first and second TAI in dairy heifers.

Structural properties of cellulose and cellulase reaction mechanism

The effects of structural properties and their changes during cellulose hydrolysis on the enzymatic hydrolysis rate have been studied from the reaction mechanism point of view. Important findings are the following: (1) The crystallinity index (CrI) of partially crystalline cellulose increases as the hydrolysis reaction proceeds, and a significant slowing down of the reaction rate during the enzymatic hydrolysis is, in large part, attributable to this structural change of cellulose substrate. (2) The crystallinity of completely disordered cellulose, like phosphoric-acid-treated cellulose, does not change significantly, and a relatively high hydrolysis rate is maintained during hydrolysis. (3) The specific surface area (SSA) of partially crystalline cellulose decreases significantly during enzymatic hydrolysis while the change in SSA of regenerated cellulose is found to be negligible. (4) The value of degree of polymerization (DP) of highly ordered crystalline cellulose remains practically constant whereas the change in DP of disordered regenerated cellulose is found to be very significant. (5) Combination of these structural effects as well as cellulase adsorption, product inhibition, and cellulase deactivation all have important influence on the rate of cellulase reaction during cellulose hydrolysis. More experimental evidence for a two-phase model, which is based on degradation of cellulose by simultaneous actions of cellulase complex on the crystalline and amorphous phases, has been obtained. Based on experimental results from this study and other results accumulated, the mode of cellulase action and a possible reaction mechanism are proposed.

Building a backlight unit with lateral gate structure based on carbon nanotube field emitters

This paper describes the fabrication of a backlight unit for liquid crystal display based on printed carbon nanotube field emitters with lateral gate and additional mesh structures. The device architecture has been optimized through field emission characterization and supporting numerical simulation. The emission current depends strongly on the cathode-gate gap, mesh position, and mesh bias. Direct observation of luminous images on a phosphor screen reveals that the electron beams undergo a noticeable shrinkage along the lateral direction with increasing anode bias, which is in good agreement with the simulation results. We suggest and demonstrate a modified structure equipped with double emitter edges leading to approximately 20% improved phosphor efficiency (34.4 lm W(-1)) and luminance (9600 cd m(-2)), compared to those from a single edge structure.

Discussion on the application of UV/H(2)O(2), O(3) and O(3)/UV processes as technologies for sewage reuse considering the removal of pharmaceuticals and personal care products

The applicability of O(3), UV/H(2)O(2) and O(3)/UV treatment processes as technologies for water reuse considering pharmaceuticals and personal care products (PPCPs) removal was investigated. Electrical energies required for the effective removal of various PPCPs in secondary effluent were 0.09 kWh/m(3), 0.54 kWh/m(3) and 1.09 kWh/m(3) for O(3), UV/H(2)O(2) and O(3)/UV treatments, respectively, showing that O(3) treatment is the most cost-effective treatment option for the PPCPs removal. O(3) treatment showed the effective PPCPs removal at O(3) dose of 6 mg/L; however, the formation of bromate is expected for O(3) treatment using O(3) dose of more than 4 mg/L. In particular, bromate formation will be a critical issue when the reclaimed water is used for direct/indirect potable reuses. Therefore, in order to suppress the bromate formation as well as achieve the effective PPCPs removal, O(3)/UV treatment will be recommended. UV/H(2)O(2) treatment will be also a profitable treatment method because no bromate will be formed during the process. The evaluation for ecological risk of PPCPs by the applied processes showed that all the processes could decrease the ecological risk caused by parent PPCPs considerably. This means that the investigated treatment processes can play an important role in reducing unpredictable side effects caused by PPCPs in the aquatic environment.