Effects of a micro/nano rough strontium-loaded surface on osseointegration

We developed a hierarchical hybrid micro/nanorough strontium-loaded Ti (MNT-Sr) surface fabricated through hydrofluoric acid etching followed by magnetron sputtering and evaluated the effects of this surface on osseointegration. Samples with a smooth Ti (ST) surface, micro Ti (MT) surface treated with hydrofluoric acid etching, and strontium-loaded nano Ti (NT-Sr) surface treated with SrTiO₃ target deposited via magnetron sputtering technique were investigated in parallel for comparison. The results showed that MNT-Sr surfaces were prepared successfully and with high interface bonding strength. Moreover, slow Sr release could be detected when the MNT-Sr and NT-Sr samples were immersed in phosphate-buffered saline. In in vitro experiments, the MNT-Sr surface significantly improved the proliferation and differentiation of osteoblasts compared with the other three groups. Twelve weeks after the four different surface implants were inserted into the distal femurs of 40 rats, the bone–implant contact in the ST, MT, NT-Sr, and MNT-Sr groups were 39.70%±6.00%, 57.60%±7.79%, 46.10%±5.51%, and 70.38%±8.61%, respectively. In terms of the mineral apposition ratio, the MNT-Sr group increased by 129%, 58%, and 25% compared with the values of the ST, MT, and NT-Sr groups, respectively. Moreover, the maximal pullout force in the MNT-Sr group was 1.12-, 0.31-, and 0.69-fold higher than the values of the ST, MT, and NT-Sr groups, respectively. These results suggested that the MNT-Sr surface has a synergistic effect of hierarchical micro/nano-topography and strontium for enhanced osseointegration, and it may be a promising option for clinical use. Compared with the MT surface, the NT-Sr surface significantly improved the differentiation of osteoblasts in vitro. In the in vivo animal experiment, the MT surface significantly enhanced the bone-implant contact and maximal pullout force than the NT-Sr surface.

Quantitative hopanoid analysis enables robust pattern detection and comparison between laboratories

Hopanoids are steroid-like lipids from the isoprenoid family that are produced primarily by bacteria. Hopanes, molecular fossils of hopanoids, offer the potential to provide insight into environmental transitions on the early Earth, if their sources and biological functions can be constrained. Semiquantitative methods for mass spectrometric analysis of hopanoids from cultures and environmental samples have been developed in the last two decades. However, the structural diversity of hopanoids, and possible variability in their ionization efficiencies on different instruments, have thus far precluded robust quantification and hindered comparison of results between laboratories. These ionization inconsistencies give rise to the need to calibrate individual instruments with purified hopanoids to reliably quantify hopanoids. Here, we present new approaches to obtain both purified and synthetic quantification standards. We optimized 2-methylhopanoid production in Rhodopseudomonas palustris TIE-1 and purified 2Me-diplopterol, 2Me-bacteriohopanetetrol (2Me-BHT), and their unmethylated species (diplopterol and BHT). We found that 2-methylation decreases the signal intensity of diplopterol between 2 and 34% depending on the instrument used to detect it, but decreases the BHT signal less than 5%. In addition, 2Me-diplopterol produces 10× higher ion counts than equivalent quantities of 2Me-BHT. Similar deviations were also observed using a flame ionization detector for signal quantification in GC. In LC-MS, however, 2Me-BHT produces 11× higher ion counts than 2Me-diplopterol but only 1.2× higher ion counts than the sterol standard pregnane acetate. To further improve quantification, we synthesized tetradeuterated (D4) diplopterol, a precursor for a variety of hopanoids. LC-MS analysis on a mixture of (D4)-diplopterol and phospholipids showed that under the influence of co-eluted phospholipids, the D4-diplopterol internal standard quantifies diplopterol more accurately than external diplopterol standards. These new quantitative approaches permit meaningful comparisons between studies, allowing more accurate hopanoid pattern detection in both laboratory and environmental samples.

Computed tomography-based distribution of involved lymph nodes in patients with upper esophageal cancer

BACKGROUND

Delineating the nodal clinical target volume (ctvn) remains a challenging task in patients with cervical or upper thoracic esophageal carcinoma (ec). In particular, the extent of the lymph area that should be included in the irradiation field remains controversial. In the present study, the extent of the ctvn was determined based on the incidence of lymph node involvement mapped by computed tomography (ct) imaging.

METHODS

Our study included 468 patients who were diagnosed with cervical and upper thoracic ec and who received staging information between June 2005 and April 2011. The anatomic distribution of metastatic regional lymph nodes was mapped using ct images and grouped using the levels established by the Radiation Therapy Oncology Group. The probability of the various groups being involved was examined. If a lymph node group had a probability of 10% or more of being involved, it was considered at high risk for metastasis, and elective treatment as part of the ctvn was recommended.

RESULTS

Lymph node involvement was mapped by ct in 256 patients (54.7%). Not all lymph node groups should be included in the ctvn. For cervical lesions, the involved lymph nodes were located mainly between the hyoid bone and the arcus aortae; the recommended ctvn should consist of the neck lymph nodes at levels iii and iv (supraclavicular group) and thoracic groups 2 and 3P. In upper thoracic ec patients, most of the involved lymph nodes were distributed between the cricoid cartilage and the subcarinal area; the ctvn should cover the supraclavicular group and thoracic nodal groups 2, 3P, 4, 5, and 7.

CONCLUSIONS

Our ct-based study indicates a specific distribution and incidence of metastatic lymph node groups in patients with cervical and upper thoracic ec. The results suggest that regional lymph node groups should be electively included in the ctvn for precise radiation administration.

A Misdiagnosed Vaginal Leiomyoma: Case Report

Leiomyomas are common benign tumors in the uterus. They are rarely seen in the vaginal wall leading to pressure symptoms on urinary tract. Here we present a case of a 44-year-old Chinese woman, who had accepted hysterectomy, with a painless paraurethral mass associated with local discomfort. A complete surgical excision was performed by vaginal route, and the histology report confirmed the diagnosis of benign leiomyoma.

Coronary artery fistula in adults: evaluation with dual-source CT coronary angiography

OBJECTIVE

To evaluate the clinical value of dual-source CT (DSCT) coronary angiography in the diagnosis of coronary artery fistula (CAF) in adults.

METHODS

A large cohort of 17,548 patients, who underwent DSCT coronary angiography in our hospital between January 2008 and October 2013, were retrospectively reviewed for CAF. The origin, course and drainage site of CAF and coexisting abnormalities were analysed. The conventional angiography results, treatments and follow-up DSCT images were also evaluated.

RESULTS

A total of 33 CAFs from 17,548 patients were detected. The incidence of CAF was 0.19% by DSCT. CAF originating from the left coronary artery (LCA) was found in 14 (42.4%) patients, from right coronary artery (RCA) in 4 (12.1%) cases and from both LCA and RCA in 15 (45.5%) patients. The pulmonary artery was the most common site of drainage (28/33, 84.8%). 8 of the 33 (24.2%) cases were associated with aneurysms. Six cases were associated with coronary artery atherosclerosis. Four patients underwent conventional angiography.

CONCLUSION

Coronary-pulmonary artery fistula in adults was found more often than in previous studies. CAF commonly originates from LCA or both LCA and RCA in adults. DSCT is a robust tool for investigating the origin, course and drainage site of CAF and coexistent abnormalities.

ADVANCES IN KNOWLEDGE

A large adult patient cohort who underwent DSCT angiography was reviewed to assess CAFs. Coronary-pulmonary artery fistula in adults was found more often than in previous studies. CAF was observed to originate from the LCA or both coronary arteries in adults. DSCT could clearly depict the fistula origin, course, drainage site and coexisting abnormalities. Conventional angiography results, treatments and follow-up DSCT images were analysed.

Purification of a secreted lectin from Andrias davidianus skin and its antibacterial activity

A lectin secreted from Andrias davidianus skin (ADL) was purified by affinity chromatography on porcine stomach mucin (type III) (PSM)-crosslinked albumin, followed by gel filtration on Sephadex G-100 and HPLC on TSK gel G3000PWXL. The purified lectin was found to be a dimeric protein, as revealed by SDS-PAGE and MALDI-TOF analysis. SDS-PAGE showed that the ADL protein had a molecular mass of 17 kDa. ADL produced an 8.5 kDa band when examined using SDS-PAGE under reducing conditions. ADL agglutinated native and trypsinized human B erythrocytes. The hemagglutination activity was inhibited by glycoproteins, such as PSM and asialo-PSM, but not by any of the monosaccharides tested. The activity was stable between 4 °C and 50 °C. Significant ADL activity was observed between pH 4–5. The lectin reaction did not depend on the presence of the divalent cation Ca2+ or Mg2+. The N-terminal ADL sequence was determined to be VGYTVGATPM. The lectin exhibited antibacterial activity, involving growth and respiration inhibition in Escherichia coli, Enterobacter aerogenes, Staphylococcus aureus, Bacillus subtilis and Shewanella sp. Furthermore, ADL showed inhibition activity against the yeast Saccharomyces cerevisiae. These findings suggest that ADL plays an important role in the innate immunity of A. davidianus on the body surface.

PsMPK7, a stress-associated mitogen-activated protein kinase (MAPK) in Phytophthora sojae, is required for stress tolerance, reactive oxygenated species detoxification, cyst germination, sexual reproduction and infection of soybean

The sensing of stress signals and their transduction into appropriate responses are crucial for the adaptation, survival and infection of phytopathogenic fungi and oomycetes. Amongst evolutionarily conserved pathways, mitogen-activated protein kinase (MAPK) cascades function as key signal transducers that use phosphorylation to convey information. In this study, we identified a gene, designated PsMPK7, one of 14 predicted genes encoding MAPKs in Phytophthora sojae. PsMPK7 was highly transcribed in each tested stage, but was up-regulated in the zoospore, cyst and cyst germination stages. Silencing of PsMPK7 affected the growth of germinated cysts, oospore production and the pathogenicity of soybean. PsMPK7 transcription was induced by stresses from sorbitol, NaCl and hydrogen peroxide. Transformants in which PsMPK7 expression was silenced (PsMPK7-silenced) were significantly more sensitive to osmotic and oxidative stress. Aniline blue and diaminobenzidine staining revealed that the silenced lines did not suppress the host reactive oxygen species (ROS) burst, indicating that either the inoculated plants activated stronger defence responses to the transformants and/or the PsMPK7-silenced transformants failed to overcome plant defences. In addition, extracellular secretion of laccase decreased in the silenced lines. Overall, our results indicate that the PsMPK7 gene encodes a stress-associated MAPK in P. sojae that is important not only for responses to various stresses, but also for ROS detoxification, cyst germination, sexual oospore production and infection of soybean.

Effect of a hierarchical hybrid micro/nanorough strontium-loaded surface on osseointegration in osteoporosis

This study evaluated the effect of a hierarchical hybrid micro/nanorough titanium strontium-loaded (MNT-Sr) surface on osseointegration under osteoporotic conditions.

Ultrashort pulse generation by semiconductor mode-locked lasers at 760 nm

We demonstrate the first semiconductor mode-locked lasers for ultrashort pulse generation at the 760 nm waveband. Multi-section laser diodes based on an AlGaAs multi-quantum-well structure were passively mode-locked, resulting in the generation of pulses at around 766 nm, with pulse durations down to ~4 ps, at pulse repetition rates of 19.4 GHz or 23.2 GHz (with different laser cavity lengths of 1.8 mm and 1.5 mm, respectively). The influence of the bias conditions on the mode-locking characteristics was investigated for these new lasers, revealing trends which can be ascribed to the interplay of dynamical processes in the saturable absorber and gain sections. It was also found that the front facet reflectivity played a key role in the stability of mode-locking and the occurrence of self-pulsations. These lasers hold significant promise as light sources for multi-photon biomedical imaging, as well as in other applications such as frequency conversion into the ultraviolet and radio-over-fibre communications.

The transient expression of miR-203 and its inhibiting effects on skeletal muscle cell proliferation and differentiation

Previous studies have shown that miR-203 is a skin-specific microRNA (miRNA) with a profound role in skin cell differentiation. However, emerging microarray and deep sequencing data revealed that miR-203 is also expressed in embryonic skeletal muscle and myoblasts. In this study, we found that miR-203 was transiently upregulated in chicken embryos on days 10 to 16 (E10-E16) and was sharply downregulated and even not expressed after E16 in chicken embryonic skeletal muscle. Histological profiles and weight variations of embryo skeletal muscle revealed that miR-203 expression is correlated with muscle development. In vitro experiments showed that miR-203 exhibited downregulated expression during myoblast differentiation into myotubes. miR-203 overexpression inhibited myoblast proliferation and differentiation, whereas its loss-of-function increased myoblast proliferation and differentiation. During myogenesis, miR-203 can target and inhibit the expression of c-JUN and MEF2C, which were important for cell proliferation and muscle development, respectively. The overexpression of c-JUN significantly promoted myoblast proliferation. Conversely, knockdown of c-JUN by siRNA suppressed myoblast proliferation. In addition, the knockdown of MEF2C by siRNA significantly inhibited myoblast differentiation. Altogether, these data not only suggested that the expression of miR-203 is transitory during chicken skeletal muscle development but also showed a novel role of miR-203 in inhibiting skeletal muscle cell proliferation and differentiation by repressing c-JUN and MEF2C, respectively.

Partially Biodegradable Distraction Implant to Replace Conventional Implants in Alveolar Bone of Insufficient Height: A Preliminary Study in Dogs

BACKGROUND

Dental implants have been widely used in the last few decades. However, patients with insufficient bone height need reconstructive surgeries before implant insertion. The distraction implant (DI) has been invented to simplify the treatment procedure, but the shortcomings of DIs have limited their clinical use. We incorporated biodegradable polyester into a novel DI called the partially biodegradable distraction implant (PBDI).

PURPOSE

The purpose of this study was to assess the radiological, histological, and biomechanical properties of the PBDI in animal models.

MATERIAL AND METHODS

PBDIs were manufactured and inserted into the atrophied mandibles of nine dogs. Box-shaped alveolar bones were segmented and distracted. The dogs were randomly divided into three groups that were sacrificed 1, 2, and 3 months after the implant insertion. Actual augmentation height (AAH) of the bone segments was measured to evaluate the effect of distraction. X-ray examination and micro-CT reconstruction and analysis were used to evaluate the regenerated bone in the distraction gap and bone around the functional element. Histological sections were used to evaluate the osseointegration and absorption of the PBDI. Fatigue tests were used to evaluate the biomechanical properties of the PBDI.

RESULTS

Little change was found in AAH among the three groups. X-ray examination and micro-CT reconstruction showed good growth of regenerated bone in the distraction gap. Alveolar bone volume around the functional element increased steadily. No obvious bone absorption occurred in the alveolar crest around PBDI. Three months after distraction, the functional element achieved osseointegration, and the support element began to be absorbed. All PBDIs survived the fatigue test.

CONCLUSIONS

The PBDI is a novel and reliable dental implant. It becomes a conventional implant after the absorption of the support element and the removal of the distraction screw. It is a promising replacement for conventional implants in patients with insufficient alveolar bone height.

Predict protein structural class for low-similarity sequences by evolutionary difference information into the general form of Chou's pseudo amino acid composition

Knowledge of protein structural class plays an important role in characterizing the overall folding type of a given protein. At present, it is still a challenge to extract sequence information solely using protein sequence for protein structural class prediction with low similarity sequence in the current computational biology. In this study, a novel sequence representation method is proposed based on position specific scoring matrix for protein structural class prediction. By defined evolutionary difference formula, varying length proteins are expressed as uniform dimensional vectors, which can represent evolutionary difference information between the adjacent residues of a given protein. To perform and evaluate the proposed method, support vector machine and jackknife tests are employed on three widely used datasets, 25PDB, 1189 and 640 datasets with sequence similarity lower than 25%, 40% and 25%, respectively. Comparison of our results with the previous methods shows that our method may provide a promising method to predict protein structural class especially for low-similarity sequences.

To conduct clinical trial in China, to go or not to go

In the last 10 years, more and more clinical trials have come to China because of potential market/easy access of patient and cost-effectiveness, but if we look back, there had been minimum changes on the regulatory requirements, and there is a possibility that China government could further strengthen the regulatory requirements for the global pharma/foreign pharma. In 2013, there was a breaking news that China government would start to investigate the corruption of GSK. So now, should the global pharma/foreign pharma go to China to conduct clinical trial? If the sponsor wants to access China market and provide unmet medical needs to China market, there are still many opportunities and there are ways to get all of these barriers resolved.