Theory of hydrogen migration in organic-inorganic halide perovskites

Assessing the Influence of Illumination on Ion Conductivity in Perovskite Solar Cells

Whether illumination influences the ion conductivity in lead-halide perovskite solar cells containing iodide halides has been an ongoing debate. Experiments to elucidate the presence of a photoconductive effect require special devices or measurement techniques and neglect possible influences of the enhanced electronic charge concentrations. Here, we assess the electronic-ionic charge transport using drift-diffusion simulations and show that the well-known increase in capacitance at low frequencies under illumination is caused by electronic currents that are amplified due to the screening of the alternating electric field by the ions. We propose a novel characterization technique to detect a potential photoinduced increase in ionic conductivity based on capacitance measurements on fully integrated devices. The method is applied to a range of perovskite solar cells with different active layer materials. Remarkably, all measured samples show a clear signature of photoenhanced ion conductivity, posing fundamental questions on the underlying nature of the photosensitive mechanism.

Hydrogen Diffusion in Hybrid Perovskites from Exchange NMR

Ion migration is an important phenomenon affecting the performance of hybrid perovskite solar cells. It is particularly challenging, however, to disentangle the contribution of H+ diffusion from that of other ions, and the atomic-scale mechanism remains unclear. Here, we use 2H exchange NMR to prove that 2H+ ions exchange between MA+ cations on the time scale of seconds for both MAPbI3 and FA0.7MA0.3PbI3 perovskites. We do this by exploiting 15N-enriched MA+ to label the cations by their 15N spin state. The exchange rates and activation energy are then calculated by performing experiments as functions of mixing time and temperature. By comparing the measured exchange rates to previously measured bulk H+ diffusivities, we demonstrate that, after dissociating, H+ ions travel through the lattice before associating to another cation rather than hopping between adjacent cations.

Tailoring Interface Energies via Phosphonic Acids to Grow and Stabilize Cubic FAPbI3 Deposited by Thermal Evaporation

Coevaporation of formamidinium lead iodide (FAPbI3) is a promising route for the fabrication of highly efficient and scalable optoelectronic devices, such as perovskite solar cells. However, it poses experimental challenges in achieving stoichiometric FAPbI3 films with a cubic structure (α-FAPbI3). In this work, we show that undesired hexagonal phases of both PbI2 and FAPbI3 form during thermal evaporation, including the well-known 2H-FAPbI3, which are detrimental for optoelectronic performance. We demonstrate the growth of α-FAPbI3 at room temperature via thermal evaporation by depositing phosphonic acids (PAc) on substrates and subsequently coevaporating PbI2 and formamidinium iodide. We use density-functional theory to develop a theoretical model to understand the relative growth energetics of the α and 2H phases of FAPbI3 for different molecular interactions. Experiments and theory show that the presence of PAc molecules stabilizes the formation of α-FAPbI3 in thin films when excess molecules are available to migrate during growth. This migration of molecules facilitates the continued presence of adsorbed organic precursors at the free surface throughout the evaporation, which lowers the growth energy of the α-FAPbI3 phase. Our theoretical analyses of PAc molecule-molecule interactions show that ligands can form hydrogen bonding to reduce the migration rate of the molecules through the deposited film, limiting the effects on the crystal structure stabilization. Our results also show that the phase stabilization with molecules that migrate is long-lasting and resistant to moist air. These findings enable reliable formation and processing of α-FAPbI3 films via vapor deposition.

Inhibition of Ion Migration for Highly Efficient and Stable Perovskite Solar Cells

In recent years, organic-inorganic halide perovskites are now emerging as the most attractive alternatives for next-generation photovoltaic devices, due to their excellent optoelectronic characteristics and low manufacturing cost. However, the resultant perovskite solar cells (PVSCs) are intrinsically unstable owing to ion migration, which severely impedes performance enhancement, even with device encapsulation. There is no doubt that the investigation of ion migration and the summarization of recent advances in inhibition strategies are necessary to develop "state-of-the-art" PVSCs with high intrinsic stability for accelerated commercialization. This review systematically elaborates on the generation and fundamental mechanisms of ion migration in PVSCs, the impact of ion migration on hysteresis, phase segregation, and operational stability, and the characterizations for ion migration in PVSCs. Then, many related works on the strategies for inhibiting ion migration toward highly efficient and stable PVSCs are summarized. Finally, the perspectives on the current obstacles and prospective strategies for inhibition of ion migration in PVSCs to boost operational stability and meet all of the requirements for commercialization success are summarized.

Tailoring passivators for highly efficient and stable perovskite solar cells

There is an ongoing global effort to advance emerging perovskite solar cells (PSCs), and many of these endeavours are focused on developing new compositions, processing methods and passivation strategies. In particular, the use of passivators to reduce the defects in perovskite materials has been demonstrated to be an effective approach for enhancing the photovoltaic performance and long-term stability of PSCs. Organic passivators have received increasing attention since the late 2010s as their structures and properties can readily be modified. First, this Review discusses the main types of defect in perovskite materials and reviews their properties. We examine the deleterious impact of defects on device efficiency and stability and highlight how defects facilitate extrinsic degradation pathways. Second, the proven use of different passivator designs to mitigate these negative effects is discussed, and possible defect passivation mechanisms are presented. Finally, we propose four specific directions for future research, which, in our opinion, will be crucial for unlocking the full potential of PSCs using the concept of defect passivation.

Defect-Polaron and Enormous Light-Induced Fermi-Level Shift at Halide Perovskite Surface

Halide perovskites intrinsically contain a large amount of point defects. The interaction of these defects with photocarriers, photons, and lattice distortion remains a complex and unresolved issue. We found that for halide perovskite films with excess halide vacancies, the Fermi level can be shifted by as much as 0.7 eV upon light illumination. These defects can trap photocarriers for hours after the light illumination is turned off. The enormous light-induced Fermi level shift and the prolonged electron trapping are explained by the capturing of photocarriers by halide vacancies at the surface of the perovskite film. The formation of this defect-photocarrier complex can result in lattice deformation and an energy shift in the defect state. The whole process is akin to polaron formation at a defect site. Our data also suggest that these trapped carriers increase the electrical polarizability of the lattice, presumably by enhancing the defect migration rate.

Modelling Interfaces in Thin-Film Photovoltaic Devices

Developing effective device architectures for energy technologies-such as solar cells, rechargeable batteries or fuel cells-does not only depend on the performance of a single material, but on the performance of multiple materials working together. A key part of this is understanding the behaviour at the interfaces between these materials. In the context of a solar cell, efficient charge transport across the interface is a pre-requisite for devices with high conversion efficiencies. There are several methods that can be used to simulate interfaces, each with an in-built set of approximations, limitations and length-scales. These methods range from those that consider only composition (e.g. data-driven approaches) to continuum device models (e.g. drift-diffusion models using the Poisson equation) and ab-initio atomistic models (developed using e.g. density functional theory). Here we present an introduction to interface models at various levels of theory, highlighting the capabilities and limitations of each. In addition, we discuss several of the various physical and chemical processes at a heterojunction interface, highlighting the complex nature of the problem and the challenges it presents for theory and simulation.

Ion Migration in Organic-Inorganic Hybrid Perovskite Solar Cells: Current Understanding and Perspectives

Organic-inorganic hybrid perovskite (OIHPs) solar cells are the most promising alternatives to traditional silicon solar cells, with a certified power conversion efficiency beyond 25%. However, the poor stability of OHIPs is one of the thorniest obstacles that hinder its commercial development. Among all the factors affecting stability, ion migration is prominent because it is unavoidable and intrinsic in OHIPs. Therefore, it is important to understand the mechanism for ion migration and regulation strategies. Herein, the types of ions that may migrate in OHIPs are first discussed; afterward, the migrating channels are demonstrated. The effects of ion migration are further elaborated. While ion migration can facilitate the p-i-n structure in some cases, the current hysteresis and other adverse effects such as phase segregation in OHIPs attract widespread attention. Based on these, several recent strategies to suppress the ion migration are enumerated, including the introduction of alkali cations, organic additives, grain boundaries passivation, and employment of low-dimensional perovskites. Finally, the prospect for further modulating the ion migration and more stable perovskite solar cells is proposed.

Probing the Origin of Light-Enhanced Ion Diffusion in Halide Perovskites

Organic-inorganic hybrid halide perovskites have emerged recently as highly promising materials for optoelectronics such as photovoltaics and photodetectors. A unique feature of these materials is ion diffusion that directly impacts the optoelectronic process by affecting the charge transport and trapping. In order to shed light on the ionic diffusion behavior, the hybrid perovskites MAPbI₃ and MAPbI₃ with minor doping of phenyl-C61-butyric acid methyl-ester (MAPbI₃-PCBM) thin-film capacitors were investigated in the presence of steady and dynamic visible illumination of different intensities. Light-induced capacitance, which increases monotonically with the increase of light intensity, was observed in the low-frequency range below 300 kHz of the electric field on both while differing quantitatively. Specifically, the large light-induced capacitance in the MAPbI₃ capacitors can be obtained in the MAPbI₃-PCBM ones in the dark. In addition, the increase of capacitance with light intensity is much less in the latter with electron trapping induced by PCBM. This result has revealed that the light-induced capacitance in MAPbI₃ capacitors can be ascribed to the contribution of the additional charges across the capacitors associated with ionic diffusion activated by the illumination and that the effects on the capacitance will remain after the illumination is turned off due to residual photoexcited electrons trapped in the MAPbI₃-PCBM sample.

Eppur si Muove: Proton Diffusion in Halide Perovskite Single Crystals

Ion diffusion affects the optoelectronic properties of halide-perovskites (HaPs). Until now, the fastest diffusion has been attributed to the movement of the halides, largely neglecting the contribution of protons, on the basis of computed density estimates. Here, the process of proton diffusion inside HaPs, following deuterium-hydrogen exchange and migration in MAPbI₃ , MAPbBr₃ , and FAPbBr₃ single crystals, is proven through D/H NMR quantification, Raman spectroscopy, and elastic recoil detection analysis, challenging the original assumption of halide-dominated diffusion. The results are confirmed by impedance spectroscopy, where MAPbBr₃ - and CsPbBr₃ -based solar cells respond at very different frequencies. Water plays a key role in allowing the migration of protons as deuteration is not detected in its absence. The water contribution is modeled to explain and forecast its effect as a function of its concentration in the perovskite structure. These findings are of great importance as they evidence how unexpected, water-dependent proton diffusion can be at the basis of the ≈7 orders of magnitude spread of diffusion (attributed to I^- and Br^- ) coefficient values, reported in the literature. The reported enhancement of the optoelectronic properties of HaP when exposed to small amounts of water may be related to the finding.

Ion migration in Br-doped MAPbI3 and its inhibition mechanisms investigated via quantum dynamics simulations

MAPb(I1-xBrx)3 is widely used as a window layer in tandem solar cells. Ion migration is one of the most important factors that results in phase separation in MAPb(I1-xBrx)3 and eventually causes a decrease of cell performance. Recent research demonstrates that the doping of Cs+ and the formation of low-dimensional perovskite structures are effective means of inhibiting the migration. To investigate the causes of the migration and its inhibition mechanisms in hybrid halide perovskite materials, large-scale quantum dynamics simulations are conducted on MAPbI3, MAPb(I0.4Br0.6)3 and Cs0.125MA0.875Pb(I0.4Br0.6)3, respectively. By tracking changes in the geometric structures of the perovskite materials before and after doping with Br- and Cs+ in the dynamics processes, the precondition for the ion migration is firstly revealed. The dimension reduction of the perovskite skeleton structures by introducing Cs+ is observed. Furthermore, by combining observations with the variations of the band gap values in all the systems, the inhibition mechanisms of Cs+ doping on ion migration in MAPb(I1-xBrx)3 are revealed.

Elucidation of the role of guanidinium incorporation in single-crystalline MAPbI3 perovskite on ion migration and activation energy

We have studied the effect of guanidinium incorporation in a single-crystalline MAPbI₃ perovskite on ion migration using temperature-dependent electrochemical impedance spectroscopy.

Light-Enhanced Ion Migration in Two-Dimensional Perovskite Single Crystals Revealed in Carbon Nanotubes/Two-Dimensional Perovskite Heterostructure and Its Photomemory Application

Two-dimensional (2D) hybrid perovskite sandwiched between two long-chain organic layers is an emerging class of low-cost semiconductor materials with unique optical properties and improved moisture stability. Unlike conventional semiconductors, ion migration in perovskite is a unique phenomenon possibly responsible for long carrier lifetime, current-voltage hysteresis, and low-frequency giant dielectric response. While there are many studies of ion migration in bulk hybrid perovskite, not much is known for its 2D counterparts, especially for ion migration induced by light excitation. Here, we construct an exfoliated 2D perovskite/carbon nanotube (CNT) heterostructure field effect transistor (FET), not only to demonstrate its potential in photomemory applications, but also to study the light induced ion migration mechanisms. We show that the FET I-V characteristic curve can be regulated by light and shows two opposite trends under different CNT oxygen doping conditions. Our temperature-dependent study indicates that the change in the I-V curve is probably caused by ion redistribution in the 2D hybrid perovskite. The first principle calculation shows the reduction of the migration barrier of I vacancy under light excitation. The device simulation shows that the increase of 2D hybrid perovskite dielectric constant (enabled by the increased ion migration) can change the I-V curve in the trends observed experimentally. Finally, the so synthesized FET shows the multilevel photomemory function. Our work shows that not only we could understand the unique ion migration behavior in 2D hybrid perovskite, it might also be used for many future memory function related applications not realizable in traditional semiconductors.

Reliable Measurement of Perovskite Solar Cells

Perovskite solar cells (PSCs) have undergone an incredibly fast development and attracted intense attention worldwide owing to their high efficiency and low-cost fabrication. However, it is challenging to make a reliable measurement of PSCs, which creates great difficulty for researchers to compare and reproduce published results. Herein, the major measurement methods and key factors affecting evaluation of PSCs are summarized, such as hysteresis in current-voltage measurement, calibration of solar simulators for less mismatch in spectra and light intensity, and the area for the calculation of current density and power conversion efficiency. PSCs are also compared with n-i-p or p-i-n structures that exhibit different feedback under the same measurement methods. Finally, a measurement proposal is provided to help researchers obtain reliable measurement results close to those certified by public test centers.

Properties of Excitons and Photogenerated Charge Carriers in Metal Halide Perovskites

Metal halide perovskites (MHPs) have recently attracted great attention from the scientific community due to their excellent photovoltaic performance as well as their tremendous potential for other optoelectronic applications such as light-emitting diodes, lasers, and photodetectors. Despite the rapid progress in device applications, a solid understanding of the photophysical properties behind the device performance is highly desirable for MHPs. Here, the properties of excitons and photogenerated charge carriers in MHPs are explored. The unique dielectric constant properties, crystal-liquid duality, and fundamental optical processes of MHPs are first discussed. The properties of excitons and related phenomena in MHPs are then detailed, including the exciton binding energy determined by various methods and their influence factors, exciton dynamics, exciton-photon coupling and related applications, and exciton-phonon coupling in MHPs. The properties of photogenerated free charge carriers in MHPs such as the carrier diffusion length, mobility, and recombination are described. Recent progress in various applications is also demonstrated. Finally, a conclusion and perspectives of future studies for MHPs are presented.

PbX2(OOCMMIm) (X = Cl, Br): photoluminescent organic-inorganic hybrid lead halide compounds with high proton conductivity

Differences in the electronegativity and hydrophilicity of halogens lead to differences in proton-conducting and photoluminescence properties in hybrid organic-inorganic lead halide compounds of [PbX₂(OOCMMIm)]_n (X = Cl (1), Br (2), HOOCMMIm = 1-carboxymethyl-3-methylimidazolium).

Intrinsic Instability of Inorganic-Organic Hybrid Halide Perovskite Materials

Hybrid lead halide perovskite materials are used in solar cells and show efficiencies greater than 23%. Furthermore, they are applied in light-emitting diodes, X-ray detectors, thin-film transistors, thermoelectrics, and memory devices. Lead trihalide hybrid materials contain methylammonium (MA) or formamidinium (FA) (or a mixture), or long alkylammonium halides, as alternative organic cations. However, the intrinsic stability of hybrid lead halide perovskites is not very high, and they are chemically unstable when exposed to moisture, light, or heat because of their organic contents and low formation energies. Therefore, although improvements in the chemical stability are crucial, changing the material composition is challenging because it is directly related to the desired application requirements. Fortunately, hybrid lead halide perovskites have a very high tolerance toward changes in physical properties arising from doping or addition of different cations and anions, in many cases showing improved properties. Here, the intrinsic instability of hybrid lead halide perovskites is reviewed in relation to the crystal phase and chemical stability. It is suggested that FA should be used for lead halide perovskites for chemical stability instead of MA. Furthermore, additives that stabilize the crystal phase with α-FAPbI₃ should eschew MA.

Microscopic insight into non-radiative decay in perovskite semiconductors from temperature-dependent luminescence blinking

Organo-metal halide perovskites are promising solution-processed semiconductors, however, they possess diverse and largely not understood non-radiative mechanisms. Here, we resolve contributions of individual non-radiative recombination centers (quenchers) in nanocrystals of methylammonium lead iodide by studying their photoluminescence blinking caused by random switching of quenchers between active and passive states. We propose a model to describe the observed reduction of blinking upon cooling and determine energetic barriers of 0.2 to 0.8 eV for enabling the switching process, which points to ion migration as the underlying mechanism. Moreover, due to the strong influence of individual quenchers, the crystals show very individually-shaped photoluminescence enhancement upon cooling, suggesting that the high variety of activation energies of the PL enhancement reported in literature is not related to intrinsic properties but rather to the defect chemistry. Stabilizing the fluctuating quenchers in their passive states thus appears to be a promising strategy for improving the material quality.

The mechanism of the non-radiative recombination in halide perovskite nanocrystals has not been fully understood. Here Gerhard et al. resolve the contributions of individual recombination centers by photoluminescence blinking measurements and identify ion migration as the underlying mechanism.

A Review: Thermal Stability of Methylammonium Lead Halide Based Perovskite Solar Cells

Perovskite solar cells have achieved photo-conversion efficiencies greater than 20%, making them a promising candidate as an emerging solar cell technology. While perovskite solar cells are expected to eventually compete with existing silicon-based solar cells on the market, their long-term stability has become a major bottleneck. In particular, perovskite films are found to be very sensitive to external factors such as air, UV light, light soaking, thermal stress and others. Among these stressors, light, oxygen and moisture-induced degradation can be slowed by integrating barrier or interface layers within the device architecture. However, the most representative perovskite absorber material, CH3NH3PbI3 (MAPbI3), appears to be thermally unstable even in an inert environment. This poses a substantial challenge for solar cell applications because device temperatures can be over 45 °C higher than ambient temperatures when operating under direct sunlight. Herein, recent advances in resolving thermal stability problems are highlighted through literature review. Moreover, the most recent and promising strategies for overcoming thermal degradation are also summarized.

Iodide-ion conduction in methylammonium lead iodide perovskite: some extraordinary aspects

Certain surprising aspects of iodide-ion conduction in MAPbI₃, such as the low migration barrier and the dominance of anti-Frenkel disorder, are discussed.

Theory and practice of modeling van der Waals interactions in electronic-structure calculations

The accurate description of long-range electron correlation, most prominently including van der Waals (vdW) dispersion interactions, represents a particularly challenging task in the modeling of molecules and materials. vdW forces arise from the interaction of quantum-mechanical fluctuations in the electronic charge density. Within (semi-)local density functional approximations or Hartree-Fock theory such interactions are neglected altogether. Non-covalent vdW interactions, however, are ubiquitous in nature and play a key role for the understanding and accurate description of the stability, dynamics, structure, and response properties in a plethora of systems. During the last decade, many promising methods have been developed for modeling vdW interactions in electronic-structure calculations. These methods include vdW-inclusive Density Functional Theory and correlated post-Hartree-Fock approaches. Here, we focus on the methods within the framework of Density Functional Theory, including non-local van der Waals density functionals, interatomic dispersion models within many-body and pairwise formulation, and random phase approximation-based approaches. This review aims to guide the reader through the theoretical foundations of these methods in a tutorial-style manner and, in particular, highlight practical aspects such as the applicability and the advantages and shortcomings of current vdW-inclusive approaches. In addition, we give an overview of complementary experimental approaches, and discuss tools for the qualitative understanding of non-covalent interactions as well as energy decomposition techniques. Besides representing a reference for the current state-of-the-art, this work is thus also designed as a concise and detailed introduction to vdW-inclusive electronic structure calculations for a general and broad audience.

Pressure-Engineered Structural and Optical Properties of Two-Dimensional (C4H9NH3)2PbI4 Perovskite Exfoliated nm-Thin Flakes

Resolving the structure-property relationships of two-dimensional (2D) organic-inorganic hybrid perovskites is essential for the development of photovoltaic and photoelectronic devices. Here, pressure (0-10 GPa) was applied to 2D hybrid perovskite flakes mechanically exfoliated from butylammonium lead halide single crystals, (C₄H₉NH₃)₂PbI₄, from which we observed a series of changes of the strong excitonic emissions in the photoluminescence spectra. By correlating with in situ high-pressure X-ray diffraction results, we examine successfully the relationship between structural modifications in the inorganic PbI₄^2- layer and their excitonic properties. During the transition between Pbca (1b) phase and Pbca (1a) phase at around 0.1 GPa, the decrease in ⟨Pb-I-Pb⟩ bond angle and increase in Pb-I bond length lead to an abrupt blue shift of the excitonic bandgap. The presence of the P2₁/a phase above 1.4 GPa increases the ⟨Pb-I-Pb⟩ bond angle and decreases the Pb-I bond length, leading to a deep red shift of the excitonic bandgap. The total band gap narrowing of ∼350 meV to 2.03 eV at 5.3 GPa before amorphization, facilitates (C₄H₉NH₃)₂PbI₄ as a much better solar absorber. Moreover, phase transitions inevitably modify the carrier lifetime of (C₄H₉NH₃)₂PbI₄, where an initial 150 ps at ambient phase is prolongated to 190 ps in the Pbca (1a) phase along with enhanced photoluminescence (PL), originating from pressure-induced strong radiative recombination of trapped excitons.The onset of P2₁/a phase shortens significantly the carrier lifetime to 53 ps along with a weak PL emission due to pressure-induced severe lattice distortion and amorphization. High-pressure study on (C₄H₉NH₃)₂PbI₄ nm-thin flakes may provide insights into the mechanisms for synthetically designing novel 2D hybrid perovskite based photoelectronic devices and solar cells.

Proton Migration in Hybrid Lead Iodide Perovskites: From Classical Hopping to Deep Quantum Tunneling

The organic-inorganic halide perovskites (OIHPs) have shown enormous potential for solar cells, while problems like the current-voltage hysteresis and the long-term instability have seriously hindered their applications. Ion migrations are believed to be relevant. But the atomistic details still remain unclear. Here we study the migrations of ions in CH₃NH₃PbI₃ (MAPbI₃) at varying temperatures ( T's), using combined experimental and first-principle theoretical methods. Classical hopping of the iodide ions is the main migration mechanism at moderate T's. Below ∼270 K, the kinetic constant for ionic migration still shows an Arrenhius dependency, but the much lower activation energy is attributed to the migration of H⁺. A gradual classical-to-quantum transition takes place between ∼140 and ∼80 K. Below ∼80 K, the kinetic constant becomes T-independent, suggesting that deep quantum tunneling of H⁺ takes over. This study gives direct experimental evidence for the migrations of H⁺s in MAPbI₃ and confirms their quantum nature.

Organic-Inorganic Hybrid Halide Perovskites for Memories, Transistors, and Artificial Synapses

Fascinating characteristics of halide perovskites (HPs), which cannot be seen in conventional semiconductors and metal oxides, have boosted the application of HPs in electronic devices beyond optoelectronics such as solar cells, photodetectors, and light-emitting diodes. Here, recent advances in HP-based memory and logic devices such as resistive-switching memories (i.e., resistive random access memory (RRAM) or memristors), transistors, and artificial synapses are reviewed, focusing on inherently exotic properties of HPs: i) tunable bandgap, ii) facile majority carrier control, iii) fast ion migration, and iv) superflexibility. Various fabrication techniques of HP thin films from solution-based methods to vacuum processes are introduced. Up-to-date work in the field, emphasizing the compositional flexibility of HPs, suggest that HPs are promising candidates for next-generation electronic devices. Taking advantages of their unique electrical properties, low-cost and low-temperature synthesis, and compositional and mechanical flexibility, HPs have enormous potential to provide a new platform for future electronic devices and explosively intensive studies will pave the way in finding new HP materials beyond conventional silicon-based semiconductors to keep up with "More-than-Moore" times.

What Remains Unexplained about the Properties of Halide Perovskites?

The notion that halide perovskite crystals (ABX₃ , where X is a halide) exhibit unique structural and optoelectronic behavior deserves serious scrutiny. After decades of steady and half a decade of intense research, the question which attributes of these materials are unusual, is discussed, with an emphasis on the identification of the most important remaining issues. The goal is to stimulate discussion rather than to merely present a community consensus.

Defects in metal triiodide perovskite materials towards high-performance solar cells: origin, impact, characterization, and engineering

The progress of defect science in metal triiodide perovskite is critically reviewed, including the origin, impacts, characterization, and engineering.

Effect of Low Temperature on Charge Transport in Operational Planar and Mesoporous Perovskite Solar Cells

Low-temperature optoelectrical studies of perovskite solar cells using MAPbI₃ and mixed-perovskite absorbers implemented into planar and mesoporous architectures reveal fundamental charge transporting properties in fully assembled devices operating under light bias. Both types of devices exhibit inverse correlation of charge carrier lifetime as a function of temperature, extending carrier lifetimes upon temperature reduction, especially after exposure to high optical biases. Contribution of bimolecular channels to the overall recombination process should not be overlooked because the density of generated charge surpasses trap-filling concentration requirements. Bimolecular charge recombination coefficient in both device types is smaller than Langevin theory prediction, and its mean value is independent of the applied illumination intensity. In planar devices, charge extraction declines upon MAPbI₃ transition from a tetragonal to an orthorhombic phase, indicating a connection between the trapping/detrapping mechanism and temperature. Studies on charge extraction by linearly increasing voltage further support this assertion, as charge carrier mobility dependence on temperature follows multiple-trapping predictions for both device structures. The monotonously increasing trend following the rise in temperature opposes the behavior observed in neat perovskite films and indicates the importance of transporting layers and the effect they have on charge transport in fully assembled solar cells. Low-temperature phase transition shows no pattern of influence on thermally activated electron/hole transport.

Kinetic Isotope Effects Provide Experimental Evidence for Proton Tunneling in Methylammonium Lead Triiodide Perovskites

The occurrence of proton tunneling in MAPbI₃ hybrid organic inorganic perovskites is demonstrated through the effect of isotopic labeling of the methylammonium (MA) component on the dielectric permittivity response. Deuteration of the ammonium group results in the acceleration of proton migration (inverse primary isotope effect), whereas deuteration of the methyl group induces a normal secondary isotope effect. The activation energies for proton migration are calculated to be 50 and 27 meV for the tetragonal and orthorhombic phases, respectively, which decrease upon deuteration of the ammonium group. The low activation barrier and the deviation from unity of the ratio of the pre-exponential factors (A_H/A_D = 0.3-0.4) are consistent with a tunneling mechanism for proton migration. Deuteration of the PEDOT:PSS hole transport layer results in a behavior that is intermediate between that of the deuterated and undeuterated perovskite, due to extrinsic ion migration between the two materials.

Pressure Dependence of Mixed Conduction and Photo Responsiveness in Organolead Tribromide Perovskites

The electrical transport properties of CH₃NH₃PbBr₃ (MAPbBr₃) polycrystals were in situ investigated by alternating-current impedance spectroscopy under high pressures up to 5.6 GPa. It is confirmed that ionic and electronic conductions coexist in MAPbBr₃. As pressure below 3.3 GPa ions migration is the predominant process, while above 3.3 GPa electronic conduction becomes the main process. An obvious ionic-electronic transition can be observed. The pressure dependent photo responsiveness of MAPbBr₃ was also studied by in situ photocurrent measurements up to 3.8 GPa. The mixed conduction can be clearly seen in photocurrent measurement. Additionally, the photocurrents remain robust below 2.4 GPa, while they are suppressed with pressure-induced partial amorphization. Interestingly, the photoelectric response of MAPbBr₃ can be enhanced by high pressure, and the strongest photocurrent value appears in the high-pressure phase II at 0.7 GPa, which is similar to previous results in both MAPbI₃ and MASnI₃.

Light-induced picosecond rotational disordering of the inorganic sublattice in hybrid perovskites

Femtosecond resolution electron scattering techniques are applied to resolve the first atomic-scale steps following absorption of a photon in the prototypical hybrid perovskite methylammonium lead iodide. Following above-gap photoexcitation, we directly resolve the transfer of energy from hot carriers to the lattice by recording changes in the mean square atomic displacements on 10-ps time scales. Measurements of the time-dependent pair distribution function show an unexpected broadening of the iodine-iodine correlation function while preserving the Pb-I distance. This indicates the formation of a rotationally disordered halide octahedral structure developing on picosecond time scales. This work shows the important role of light-induced structural deformations within the inorganic sublattice in elucidating the unique optoelectronic functionality exhibited by hybrid perovskites and provides new understanding of hot carrier-lattice interactions, which fundamentally determine solar cell efficiencies.

Manipulating Ion Migration for Highly Stable Light-Emitting Diodes with Single-Crystalline Organometal Halide Perovskite Microplatelets

Ion migration has been commonly observed as a detrimental phenomenon in organometal halide perovskite semiconductors, causing the measurement hysteresis in solar cells and ultrashort operation lifetimes in light-emitting diodes. In this work, ion migration is utilized for the formation of a p-i-n junction at ambient temperature in single-crystalline organometal halide perovskites. The junction is subsequently stabilized by quenching the ionic movement at a low temperature. Such a strategy of manipulating the ion migration has led to efficient single-crystalline light-emitting diodes that emit 2.3 eV photons starting at 1.8 V and sustain a continuous operation for 54 h at ∼5000 cd m^-2 without degradation of brightness. In addition, a whispering-gallery-mode cavity and exciton-exciton interaction in the perovskite microplatelets have both been observed that can be potentially useful for achieving electrically driven laser diodes based on single-crystalline organometal halide perovskite semiconductors.

Perspective: Theory and simulation of hybrid halide perovskites

Organic-inorganic halide perovskites present a number of challenges for first-principles atomistic materials modeling. Such "plastic crystals" feature dynamic processes across multiple length and time scales. These include the following: (i) transport of slow ions and fast electrons; (ii) highly anharmonic lattice dynamics with short phonon lifetimes; (iii) local symmetry breaking of the average crystallographic space group; (iv) strong relativistic (spin-orbit coupling) effects on the electronic band structure; and (v) thermodynamic metastability and rapid chemical breakdown. These issues, which affect the operation of solar cells, are outlined in this perspective. We also discuss general guidelines for performing quantitative and predictive simulations of these materials, which are relevant to metal-organic frameworks and other hybrid semiconducting, dielectric and ferroelectric compounds.

Origins and mechanisms of hysteresis in organometal halide perovskites

Inorganic-organic halide organometal perovskites, such as CH₃NH₃PbI₃ and CsPbI₃, etc, have been an unprecedented rising star in the field of photovoltaics since 2009, owing to their exceptionally high power conversion efficiency and simple fabrication processability. Despite its relatively short history of development, intensive investigations have been concentrating on this material; these have ranged from crystal structure analysis and photophysical characterization to performance optimization and device integration, etc. Yet, when applied in photovoltaic devices, this material suffers from hysteresis, that is, the difference of the current-voltage (I-V) curve during sweeping in two directions (from short-circuit towards open-circuit and vice versa). This behavior may significantly impede its large-scale commercial application. This Review will focus on the recent theoretical and experimental efforts to reveal the origin and mechanism of hysteresis. The proposed origins include (1) ferroelectric polarization, (2) charge trapping/detrapping, and (3) ion migration. Among them, recent evidence consistently supports the idea that ion migration plays a key role for the hysteretic behavior in perovskite solar cells (PSCs). Hence, this Review will summarize the recent results on ion migration such as the migrating ion species, activation energy measurement, capacitive characterization, and internal electrical field modulation, etc. In addition, this Review will also present the devices with alleviation/elimination of hysteresis by incorporating either large-size grains or phenyl-C61-butyric acid methyl ester molecules. In a different application, the hysteretic property has been utilized in photovoltaic and memristive switching devices. In sum, by examining these three possible mechanisms, it is concluded that the origin of hysteresis in PSCs is associated with a combination of effects, but mainly limited by ion/defect migration. This strong interaction between ion motion and free charge carrier transport can be modulated by the prevalent crystalline structure, chemical passivation, and an external photo/electrical field.

Quantification of light-enhanced ionic transport in lead iodide perovskite thin films and its solar cell applications

Ionic transport in organometal halide perovskites is of vital importance because it dominates anomalous phenomena in perovskite solar cells, from hysteresis to switchable photovoltaic effects. However, excited state ionic transport under illumination has remained elusive, although it is essential for understanding the unusual light-induced effects (light-induced self-poling, photo-induced halide segregation and slow photoconductivity response) in organometal halide perovskites for optoelectronic applications. Here, we quantitatively demonstrate light-enhanced ionic transport in CH₃NH₃PbI₃ over a wide temperature range of 17-295 K, which reveals a reduction in ionic transport activation energy by approximately a factor of five (from 0.82 to 0.15 eV) under illumination. The pure ionic conductance is obtained by separating it from the electronic contribution in cryogenic galvanostatic and voltage-current measurements. On the basis of these findings, we design a novel light-assisted method of catalyzing ionic interdiffusion between CH₃NH₃I and PbI₂ stacking layers in sequential deposition perovskite synthesis. X-ray diffraction patterns indicate a significant reduction of PbI₂ residue in the optimized CH₃NH₃PbI₃ thin film produced via light-assisted sequential deposition, and the resulting solar cell efficiency is increased by over 100% (7.5%-15.7%) with little PbI₂ residue. This new method enables fine control of the reaction depth in perovskite synthesis and, in turn, supports light-enhanced ionic transport.

Multidimensional Perovskites: A Mixed Cation Approach Towards Ambient Stable and Tunable Perovskite Photovoltaics

Although halide perovskites are able to deliver high power conversion efficiencies, their ambient stability still remains an obstacle for commercialization. Thus, promoting the ambient stability of perovskites has become a key research focus. In this review, we highlight the sources of instability in conventional 3 D perovskites, including water intercalation, ion migration, and thermal decomposition. Recently, the multidimensional perovskites approach has become one of the most promising strategies to enhance the stability of perovskites. As compared to pure 2 D perovskites, multidimensional perovskites typically possess more ideal band gaps, better charge transport, and lower exciton binding energy, which are essential for photovoltaic applications. The larger organic cations in multidimensional perovskites could also be more chemically stable at higher temperatures than the commonly used methylammonium cation. By combining 3 D and 2 D perovskites to form multidimensional perovskites, halide perovskite photovoltaics can attain both high efficiency and increased stability.

Electron-Rotor Interaction in Organic-Inorganic Lead Iodide Perovskites Discovered by Isotope Effects

We report on the carrier-rotor coupling effect in perovskite organic-inorganic hybrid lead iodide (CH3NH3PbI3) compounds discovered by isotope effects. Deuterated organic-inorganic perovskite compounds including CH3ND3PbI3, CD3NH3PbI3, and CD3ND3PbI3 were synthesized. Devices made from regular CH3NH3PbI3 and deuterated CH3ND3PbI3 exhibit comparable performance in band gap, current-voltage, carrier mobility, and power conversion efficiency. However, a time-resolved photoluminescence (TRPL) study reveals that CH3NH3PbI3 exhibits notably longer carrier lifetime than that of CH3ND3PbI3, in both thin-film and single-crystal formats. Furthermore, the comparison in carrier lifetime between CD3NH3PbI3 and CH3ND3PbI3 single crystals suggests that vibrational modes in methylammonium (MA(+)) have little impact on carrier lifetime. In contrast, the fully deuterated compound CD3ND3PbI3 reconfirmed the trend of decreasing carrier lifetime upon the increasing moment of inertia of cationic MA(+). Polaron model elucidates the electron-rotor interaction.

Intrinsic Charge Transport across Phase Transitions in Hybrid Organo-Inorganic Perovskites

Hall effect measurements in CH3 NH3 PbBr3 single crystals reveal that the charge-carrier mobility follows an inverse-temperature power-law dependence, μ ∝ T(-) (γ) , with the power exponent γ = 1.4 ± 0.1 in the cubic phase, indicating an acoustic-phonon-dominated carrier scattering, and γ = 0.5 ± 0.1 in the tetragonal phase, suggesting another dominant mechanism, such as a piezoelectric or space-charge scattering.

Thermally Activated Point Defect Diffusion in Methylammonium Lead Trihalide: Anisotropic and Ultrahigh Mobility of Iodine

We study the diffusion of point defects in crystalline methylammonium lead halide (MAPI) at finite temperatures by using all-atoms molecular dynamics. We find that, for what concerns intrinsic defects, iodine diffusion is by far the dominant mechanism of ionic transport in MAPI, with diffusivities as high as 7.4 × 10(-7) and 4.3 × 10(-6) cm(2) s(-1) at 300 K and single activation energies of 0.24 and 0.10 eV, for interstitials and vacancies, respectively. The comparison with common covalent and oxide crystals reveals the ultrahigh mobility of defects in MAPI. Though at room temperature the vacancies are about 1 order of magnitude more diffusive, the anisotropic interstitial dynamics increases more rapidly with temperature, and it can be dominant at high temperatures. Present results are fully consistent with the involvement of iodide ions in hysteresis and have implications for improvement of the material quality by better control of defect diffusion.

Advances in Perovskite Solar Cells

Organolead halide perovskite materials possess a combination of remarkable optoelectronic properties, such as steep optical absorption edge and high absorption coefficients, long charge carrier diffusion lengths and lifetimes. Taken together with the ability for low temperature preparation, also from solution, perovskite-based devices, especially photovoltaic (PV) cells have been studied intensively, with remarkable progress in performance, over the past few years. The combination of high efficiency, low cost and additional (non-PV) applications provides great potential for commercialization. Performance and applications of perovskite solar cells often correlate with their device structures. Many innovative device structures were developed, aiming at large-scale fabrication, reducing fabrication cost, enhancing the power conversion efficiency and thus broadening potential future applications. This review summarizes typical structures of perovskite solar cells and comments on novel device structures. The applications of perovskite solar cells are discussed.