Effect of dry- and wet-milled rice flours on the quality attributes of gluten-free dough and noodles

Effect of Water Content in Semidry Grinding on the Quality of Glutinous Rice Flour

The grinding process is one of the key factors affecting the quality of glutinous rice flour (GRF). As an emerging grinding method, semidry grinding aims to solve the problems of the high yield of wastewater in traditional wet grinding and the high content of damaged starch in dry grinding, in which the water content has a great influence on the quality of GRF. However, semidry grinding has not yet been formally put into production due to limitations such as the long time required to adjust the water content of rice grains. Therefore, this work was carried out to shorten the soaking time of glutinous rice (GR) by hot air pretreatment, and to conduct a systematic and in-depth study of the effect of water content on the quality of GRF, including water distribution, water hydration properties, thermal properties, rheological properties, and microstructure. The results showed that the GRF with higher water content had lower water solubility and higher enthalpy of pasting, which were due to the low content of damaged starch and the high degree of crystallization. The particle size of the GRF became smaller as the interaction between water and starch was enhanced and the GR was softened. In addition, the viscosity and elasticity of the GRF were also improved with an increase in water content. This work provides theoretical guidance for the improvement of semidry grinding to a certain extent.

Structural features of rice starch-protein system: Influence of retrogradation time and quick-freezing temperature

This work investigated the effect of retrogradation time (0 h, 2 h, 4 h, 6 h, 8 h) and freezing temperature (-20 °C, -32 °C, -80 °C) on the muti-scale structures of the rice starch-protein system of quick-frozen wet rice noodles. The Relative crystallinity and porosity of the rice starch-protein system increased with increasing retrogradation time. However, while longer retrogradation does lead to an improvement in relative crystallinity, it also results in significant damage to the microstructure. When the retrogradation time was 6 h, the microstructure of the rice starch-protein system was less damaged and the quality was better. The mass fractal dimension and relative crystallinity of the rice starch-protein system exhibited an increase as the freezing temperature was decreased from -20 to -80 °C. Additionally, the retrogradation degree of starch decreased, the size of ice crystals decreased, and the disruption of microforms was reduced. The muti-scale structures of the rice starch-protein systems were similar when quick-frozen at temperatures of -32 and -80 °C. Therefore, the optimal treatment method for practical production is to quick-freeze at -32 °C and age for 6 h to obtain high-quality quick-frozen wet rice noodles.

Technology for Blending Recombined Flour: Substitution of Extruded Rice Flour, Quantity of Addition, and Impact on Dough

In a previous study, rice bread was prepared using a combination of rice-wheat mixed flour. To investigate the impact of the partial adoption of extruded rice flour (ERF) on mixed flour (MF) and mixed dough (MD), the effects of adding ERF on the pasting, mixing characteristics, texture, and water retention of the MF and MD were examined by a rapid visco analyzer (RVA), Mixolab, texture profile analysis (TPA), and a low-field nuclear magnetic resonance analyzer (LF-NMR). The PV, TV, BD, FV, and SV of the MF declined as the incorporated amount of ERF increased. There was no significant difference in the PT at the 5-15% addition level (p < 0.05), but it showed an increasing trend at the 20-30% level (p < 0.05). The incorporation of ERF led to a significant increase in the water absorption (WA) of the MD, while the DT, ST, C2, C3, C4, and C5 exhibited a declining trend. The texture analysis revealed a significant decrease in the dough hardness with the addition of ERF, with a 55% reduction in the hardness of the 30% improved mixed dough (IMD), and the cohesiveness increased significantly (p < 0.05). The IMD was mainly composed of weakly bound water. The content of weakly bound water increased with the ERF amount.

Machine learning-enabled hyperspectral approaches for structural characterization of precooked noodles during refrigerated storage

The structural features of precooked noodles during refrigerated storage were non-destructively characterized using hyperspectral imaging (HSI) technology along with conventional analytical methods. The precooked noodles displayed a more rigid texture and restricted water mobility over the storage period, derived from the recrystallization of starch. Dimensionality reduction techniques revealed robust correlations between the storage duration and HSI absorbance of the noodles, and from their loading plots, the specific peaks of the noodles related to their structural changes were identified at wavelengths of around 1160 and 1400 nm. The strong relationships between the HSI results of the noodles and their storage period/texture were confirmed by training four machine learning models on the HSI data. In particular, the support vector algorithm displayed the best prediction performance for classifying precooked noodles by storage period (98.3% accuracy) and for predicting the noodle texture (R2 = 0.914).

Structure-function relationship of oat flour fractions when blended with wheat flour: Instrumental and nutritional quality characterization of resulting breads

The present work investigated the structure-function relationship of dry fractionated oat flour (DFOF) as a techno-functional ingredient using bread as a model system. Mechanically, DFOF fractions (F), that is, F1: <224 µm, F2: 250-280 µm, F3: 280-500 µm, F4: 500-600 µm, and whole oat flour (F5) were blended with white wheat flour at 10%, 30%, and 50% substitution levels for bread making. The blended flours, doughs, and bread samples were assessed for their techno-functional, nutritional, and structural characteristics. The results of Mixolab and the Rapid Visco Analyzer show that the 50% substituted F3 fraction exhibits the highest water absorption properties (69.53%), whereas the 50% F1 fraction exhibits the highest peak viscosity of the past slurry. Analysis of bread samples revealed a lower particle size of DFOF fractions and higher supplementation levels, increased β-glucan levels (0.13-1.29 g/100 bread (db), reduced fermentable monosaccharides, that is, glucose (1.44-0.33 g/100 g), and fructose (1.06-0.28 g/100 g). The effect of particle size surpassed the substitution level effect on bread volume reduction. The lowest hardness value for F1 is 10%, and the highest value for F2 is 50%. The total number of cells in the bread slice decreased from the control to the F4 fraction (50%). Multi-criteria analysis indicated that DFOF fractions produced breads with similar structure and higher nutritional value developed from white wheat flour. PRACTICAL APPLICATION: The use of mechanically fractionated oat flours fractions in white wheat flour breads can improve the nutritional profile without affecting the physical properties of the bread product. Based on the oat flour fractions, bakers and food processing companies can tailor the bread formulations for high β-glucan, high fiber, and low reduced sugar claims.

Explaining the improving effect of dough crumb-sheet composite rolling on fresh noodle quality: From microstructure and moisture distribution perspective

A new technique known as dough crumb-sheet composite rolling (DC-SCR) was used to improve the quality of fresh noodles. However, there is a dearth of theoretical investigations into the optimal selection of specific parameters for this technology, and the underlying mechanisms are not fully understood. Therefore, the effects of dough crumb addition times in DC-SCR on the texture, cooking, and eating quality of fresh noodles were first studied. Then, the underlying regulation mechanism of DC-SCR technology on fresh noodles was analyzed in terms of moisture distribution and microstructure. The study demonstrated that the most significant enhancement in the quality of fresh noodles was achieved by adding dough crumbs six times. Compared with fresh noodles made without the addition of dough crumbs, the initial hardness and chewiness of fresh noodles made by adding six times of dough crumbs increased by 25.32% and 46.82%, respectively. In contrast, the cooking time and cooking loss were reduced by 28.45% and 29.69%, respectively. This quality improvement in fresh noodles made by DC-SCR came from the microstructural differences of the gluten network between the inner and outer layers of the dough sheet. A dense structure on the outside and a loose structure on the inside could endow the fresh noodles made by DC-SCR with higher hardness, a shortened cooking time, and less cooking loss. This study would provide a theoretical and experimental basis for creating high-quality fresh noodles.

Exploring the relationship between starch structure and physicochemical properties: The impact of extrusion on highland barley flour

Highland barley (HB) is an intriguing plateau cereal crop with high nutrition and health benefits. However, abundant dietary fiber and deficient gluten pose challenges to the processing and taste of whole HB products. Extrusion technology has been proved to be effective in overcoming these hurdles, but the association between the structure and physicochemical properties during extrusion remains inadequately unexplored. Therefore, this study aims to comprehensively understand the impact of extrusion conditions on the physicochemical properties of HB flour (HBF) and the multi-scale structure of starch. Results indicated that the nutritional value of HBF were significantly increased (soluble dietary fiber and β-glucan increased by 24.05%, 19.85% respectively) after extrusion. Typical underlying mechanisms based on starch structure were established. High temperature facilitated starch gelatinization, resulting in double helices unwinding, amylose leaching, and starch-lipid complexes forming. These alterations enhanced the water absorption capacity, cold thickening ability, and peak viscosity of HBF. More V-type complexes impeded amylose rearrangement, thus enhancing resistance to retrogradation and thermal stability. Extrusion at high temperature and moisture exhibited similarities to hydrothermal treatment, partly promoting amylose rearrangement and enhancing HBF peak viscosity. Conversely, under low temperature and high moisture, well-swelled starch granules were easily broken into shorter branch-chains by higher shear force, which enhanced the instant solubility and retrogradation resistance of HBF as well as reduced its pasting viscosity and the capacity to form gel networks. Importantly, starch degradation products during this condition were experimentally confirmed from various aspects. This study provided some reference for profiting from extrusion for further development of HB functional food and "clean label" food additives.

Retrogradation-induced physicochemical changes in pre-cooked rice noodles stored at different temperatures: a viewpoint from water dynamics and structure

BACKGROUND

There has been significant interest in pre-cooked noodles that have a long shelf life and are convenient to cook. However, the thermal processes during preparation, and their high moisture content, can lead to significant quality deterioration during storage. Nevertheless, a comprehensive evaluation of these quality losses has not yet been conducted.

RESULTS

The effects of different storage temperatures (25, 4, and -20 °C) on the retrogradation-related physicochemical changes in pre-cooked rice noodles were elucidated mainly from the water dynamics and structural viewpoints. Thermal analysis demonstrated that amylopectin recrystallization took place in the noodles stored at refrigerated temperature, followed by room temperature. The refrigerated storage accelerated the starch retrogradation that caused the water molecules to become entrapped within the crystalline structure by lowering the water hydration properties and weighted T2 relaxation times of the pre-cooked noodles. These water mobility patterns were correlated with the textural changes in the noodles (greater hardness and Rmax /extensibility). Furthermore, the higher structural density and thickness derived from starch retrogradation were observed in the tomographic and microscopic images of the refrigerated noodles. The principal component analysis demonstrated that various physicochemical changes of the pre-cooked noodles during storage showed high correlations with the degree of starch retrogradation (r > 0.83).

CONCLUSION

The physicochemical features of the precooked noodles stored under refrigerated conditions were involved in the molecular dynamics of water, showing a notable water mobility reduction derived from the starch retrogradation, which contributed to their thermal, tomographical, and textural changes. © 2023 Society of Chemical Industry.

Development of functional noodles by encapsulating mango peel powder as a source of bioactive compounds

Antioxidant compounds such as phenolics and carotenoids scavenge reactive oxygen species and protect against degenerative diseases such as cancer and cardiovascular disease when used as food additives or supplements. Mango peel is a by-product of mango which is a good source of bioactive substances such as phytochemicals, antioxidants, and dietary fibers. Unfortunately, the study on mango peel as a potential food additive is very limited. Accordingly, the present study aimed to develop functional noodles through extrusion technology with the encapsulation of mango peel powder as a natural source of bioactive compounds. First, mango peel powder (MPP) was prepared and incorporated during the mixing of ingredients before noodles formation at three different levels (2.5, 5 and 7.5 %). Afterward, the noodles were studied to determine how the encapsulated MPP affects the proximate composition, physicochemical characteristics, polyphenols, carotenoids, anthocyanin, antioxidant and antidiabetic activity, and sensory characteristics. The noodles exhibited a dose-dependent relationship in the content of bioactive components and functional activities with the encapsulation of MPP levels. A significantly (p 0.05) higher value was noticed in 7.5 % of MPP-encapsulated noodles than in any level of MPP encapsulation in noodles. The fiber and protein contents in the MPP-encapsulated noodles were increased by about 0-1.22 % and 0-3.16 %, respectively. However, noodles' color index and water absorption index were decreased with the level of MPP encapsulation. The cooking loss of noodles increased from 4.64 to 5.17, 6.49, and 7.32 %, whereas the cooked weight decreased from 35.11 to 34.40, 33.65, and 33.23 % with 2.5, 5.0, and 7.5 % of MPP encapsulation, respectively. However, MPP was stable during storage of noodles exhibiting higher phenolic content and antioxidant activity than control samples. The sensory evaluation showed that MPP-encapsulated noodles at levels 2.5 and 5 % had approximately similar overall acceptability values with the control sample. As a result of the findings, it appears that adding MPP up to 5 % to noodles improves their nutritional quality without changing their cooking, structural, or sensory aspects. Therefore, mango peel powder can be a potential cheap source for the development of functional noodles and food ingredients.

Rice-Based Gluten-Free Foods and Technologies: A Review

Rice, one of the most widely consumed staples worldwide, serves as a versatile gluten-free substitute. However, review articles on technological developments in grain-free production focusing on rice are scarce. This review assesses various research results concerning the quality attributes of rice-based gluten-free foods, including bread, pasta, and beer. To optimize the key attributes in processed products, such as dough leavening in bread and the physical and cooking properties of noodles and pasta, research has focused on blending different gluten-free grains and incorporating additives that mimic the gluten function. Additionally, various processing technologies, such as starch preprocessing and extrusion puffing processes, have been employed to boost the quality of rice-based gluten-free products. Today, a variety of products, including bread, noodles, and beer, use rice as a partial replacement for barley or wheat. With rapid advancements in technology, a noticeable portion of consumers now shows a preference for products containing rice as a substitute. This trend indicates that rice-based gluten-free foods can be enhanced by leveraging the latest developments in gluten-free product technologies, particularly in countries where rice is a staple or is predominantly cultivated.

Effect of guar gum and egg addition on characteristics of noodle analog made from rice flour

Noodle analog is a non-gluten-based noodle. Noodle analog made from rice flour is known to have less desirable physical characteristics, such as a harder and less chewy texture. The addition of guar gum as a hydrocolloid and egg in this research was done to improve the rice-flour-based noodle analog characteristics. The aim of this research was to determine the best guar gum and egg concentration to enhance the noodle analog characteristics. The guar gum was added in several concentrations (1.5%, 2%, 2.5%, and 3% w/w), and raw fresh chicken egg was also added in different concentrations (3%, 5%, and 7% w/w). The best noodle analog was obtained with the addition of 3% guar gum and 5% raw fresh chicken egg. This formulation has the lowest adhesiveness value, high elongation, cohesiveness and springiness, with better cooking quality, such as low cooking loss and moderate water absorption. The best noodle analog was then compared to the commercial noodle. The noodle analog had a lower cooking loss, but the wheat flour-based commercial noodle still had better textural properties, such as softer, less adhesive, and springier texture. However, the noodle analog had better cohesiveness and higher tensile strength with a similar elongation compared to wheat flour-based commercial noodle.

Identification, characterization, and application of a d-cysteine desulfhydrase from rice seed (Oryza sativa L.)

Cysteine desulfhydrases decompose cysteine to produce pyruvate, ammonium, and hydrogen sulfide. Using d-cysteine (D-cys) as a substrate, an enzyme with this activity was purified from rice seeds and identified at the native protein level. MALDI-TOF-MS analysis of its tryptic peptides revealed a 426 amino acid protein encoded by the OsDCD1 gene (Os02g0773300). Recombinant OsDCD1 (rOsDCD1) was expressed in Escherichia coli cells and purified as a single protein by column chromatography. Gel filtration column chromatography indicated that the native enzyme was a homodimer. The enzyme exhibited maximum catalytic activity at approximately pH 7.5 and 40 °C and was stable at pH 5.5-7.5 and < 37 °C. Kinetics analysis indicated Km and Vmax values for D-cys of 136 μM and 45.5 μmol/min/mg protein, respectively. In contrast, l-cysteine (L-cys) acted as an inhibitor with mixed non-competitive inhibition. Based on the substrate specificity of rOsDCD1, the amount of D-cys in rice flour was quantified. Even in the presence of up to 1 mM L-cys, the quantification of low concentrations of D-cys was unaffected. We demonstrate for the first time that the amount of D-cys in rice flour varies in the range of 0.76-0.93 μmol/g depending on the variety.

The Effect of Different Milling Methods on the Physicochemical and In Vitro Digestibility of Rice Flour

Preparation methods have been found to affect the physical and chemical properties of rice. This study prepared Guichao rice flour with wet, dry, semi-dry, and jet milling techniques. Differences in the particle size distribution of rice flour were investigated in order to assess their impact on pasting, thermal, gel, starch digestibility, and crystalline structure using an X-ray diffractometer (XRD) and a Rapid Visco Analyzer (RVA) across in vitro digestibility experiments. The results showed that semi-dry-milled rice flour (SRF) and wet-milled rice flour (WRF) were similar in damaged starch content, crystalline structure, and gelatinization temperature. However, compared with dry-milled rice flour (DRF) and jet-milled rice flour (JRF), SRF had less damaged starch, a higher absorption enthalpy value, and a higher gelatinization temperature. For starch digestibility, the extended glycemic index (eGI) values of WRF (85.30) and SRF (89.97) were significantly lower than those of DRF (94.47) and JRF (99.27). In general, the physicochemical properties and starch digestibility of WRF and SRF were better than those of DRF and JRF. SRF retained the advantages of WRF while avoiding the high energy consumption, high water consumption, and microbial contamination disadvantages of WRF and was able to produce better rice flour-associated products.

Exploring the influence mechanism of water grinding on the gel properties of corn starch based on changes in its structure and properties

BACKGROUND

At present, most studies have focused on the preparation of modified starches by dry grinding. As an excellent starch plasticizer, water might enhance the action of grinding on the structure of starch granules, and water grinding might improve the gel properties of starch. Therefore, this article explored the influence mechanism of water grinding on the gel properties of corn starch based on the changes in its structure and properties.

RESULTS

The results showed that water grinding could make water enter the starch granules and hydrate the starch molecules, and the starch gelatinized after water grinding for 20 min. Thus, water enhanced the action of grinding on the structure of the starch granules. Under the plasticization and grinding action of water grinding, the mechanochemical effect of the starch granules occurred. When the starch was in the aggregation stage (7.5-10 min), the crystallinity of the starch increased, and the starch molecules rearranged into a more stable structure, which increased apparent viscosity (η), elastic modulus (G') and viscous modulus (G″) of the starch gels.

CONCLUSION

Therefore, appropriate water grinding (10 min) contributed to increasing the viscoelasticity of starch gels. This study provided a theoretical foundation for research on improving the properties of starch by mechanical modification in future. © 2023 Society of Chemical Industry.

Toward a comprehensive understanding of various milling methods on the physicochemical properties of highland barley flours and eating quality of corresponding sugar-free cookies

Highland barley (HB) was subjected to dry-, semidry-, wet-milling methods and assessed for flour physicochemical properties and eating quality of corresponding sugar-free cookies. Results showed that there were significant differences between different milled flours in damaged starch content, particle size, hydration, pasting properties, and color. High a* values and poor hydration/pasting properties of wet-milled flours were associated with its smallest particle size and lowest content of damaged starch (25.3%), β-glucan (1.87%), and dietary fiber (10.87%), resulting in dark brown color, slightly high spread ratio, low hardness, and fast digestibility of the corresponding cookies. Conversely, the low digestibility of the cookies (predicted glycemic index 58.85) prepared from dry-milled flours was attributed to the higher content of dietary fiber, β-glucan and V-type starch-lipid complex, which would affect enzyme accessibility and may be beneficial for making HB sugar-free cookies. This study is expected to promote the development of HB functional foods.

Different Characteristics of Annealed Rice Kernels and Flour and Their Effects on the Quality of Rice Noodles

In this study, the characteristics of indica rice kernels (IRK) and flour (IRF) annealed in different conditions were evaluated, and the quality of rice noodles made with these IRK and IRF was determined. Native IRK and IRF were annealed in deionized water at a kernel or flour to water ratio of 1:3 (w/v) and temperatures of 50, 55, 60, and 65 °C for 12 and 24 h. Annealing increased the paste viscosity of IRK while decreasing that of IRF. Both annealed IRK and IRF exhibited increases in the gelatinization enthalpy change and relative crystallinity. Annealed IRK gel showed higher hardness, and annealed IRF gel displayed greater springiness. Unlike native rice noodles, annealed IRK noodles exhibited denser pores, while annealed IRF noodles exhibited a looser microstructure. With increasing annealing temperature and time, both annealed IRK and IRF noodles showed enhanced tensile properties. Rice noodles made from IRF annealed at 65 °C for 12 h exhibited a fracture strain of 2.7 times that of native rice noodles. In brief, IRK and IRF exhibited different degrees of susceptibility to annealing. Annealing had more significant effects on IRF than IRK. This study highlights the possibility of using annealed IRK and IRF in rice noodles.

Ball-milling: A sustainable and green approach for starch modification

Ball-milling is a low-cost and green technology that offers mechanical actions (shear, friction, collision, and impact) to modify and reduce starch to nanoscale size. It is one of the physical modification techniques used to reduce the relative crystallinity and improve the digestibility of starch to their better utility. Ball-milling alters surface morphology, improving the overall surface area and texture of starch granules. This approach also can improve functional properties, including swelling, solubility, and water solubility, with increased energy supplied. Further, the increased surface area of starch particles and subsequent increase in active sites enhance chemical reactions and alteration in structural transformations and physical and chemical properties. This review is about current information on the impact of ball-milling on the compositions, fine structures, morphological, thermal, and rheological characteristics of starch granules. Furthermore, ball-milling is an efficient approach for the development of high-quality starches for applications in the food and non-food industries. There is also an attempt to compare ball-milled starches from various botanical sources.

Superheated steam processing of cereals and cereal products: A review

The concept of superheated steam (SS) was proposed over a century ago and has been widely studied as a drying method. SS processing of cereals and cereal products has been extensively studied in recent years for its advantages of higher drying rates above the inversion temperature, oxygen-free environment, energy conservation, and environmental protection. This review provides a brief introduction to the history, principles, and classification of SS. The applications of SS processing in the drying, enzymatic inactivation, sterilization, mycotoxin degradation, roasting, and cooking of cereals and cereal products are summarized and discussed. Moreover, the effects of SS processing on the physicochemical properties of cereals and the qualities of cereal foods are reviewed and discussed. The applications of SS for cereal processing and its effects on cereal properties have been extensively studied; however, issues such as the browning of cereal foods, thermal damage of starch, protein denaturation, and nutrition loss have not been comprehensively studied. Therefore, further studies are required to better understand the mechanism of the quality changes caused by SS processing and to expand the fields of application of SS in the cereal processing industry. This review enhances the understanding of SS processing and presents theoretical suggestions for promoting SS processing to improve the safety and quality of cereals and cereal products.

Investigation on Nutritional, Phytochemical, and Antioxidant Abilities of Various Traditional Rice Varieties

Rice (Oryza sativa L.) is a popular grain that is consumed by almost half of the world's population. Rice has several distinct breeds classified as traditional and ancient grains. The consumption of rice by 60% of the world's population is a staple food. Entire grain rice, often known as brown rice, is the unpolished counterpart of white rice, containing bran, germ, and endosperm. Eating whole-grain rice is linked to many health benefits; thus, scientists have focused on identifying and quantifying bioactive chemicals in this meal. The present study assessed the physio-chemical, cooking attributes, mineral contents, phytochemicals, and free radical scavenging capabilities of conventional rice cultivars using known approaches according to particle size analysis. Rice grain lengths varied between 4.10 ± 16 and 6.20 ± 007. The length and thickness ratios of rice were not substantially different (p > 0.05). Kattuyanam has the maximum protein content (9.99 ± 06%) of all the rice varieties that were physio-chemical investigated. It also has highest phenolic content and antioxidant properties compared to gallic acid equivalent (334.900 ± 61 g) (GAE)/100 g, followed by anthocyanins and flavonoids. Total phenolic content and phenolic fractions of the HPLC profile in tested landraces indicate the presence of bioactive substances derived from traditional rice cultivars and a range of phytonutrients, including phenol, revealing their healthy potentials in the present study.

Gluten-free bakery products: Ingredients and processes

There is an increasing demand for gluten-free products around the world because certain groups of people, which have increased in the last decades, need to eliminate gluten from their diet. A growing number of people consider gluten-free products to be healthier. However, making gluten-free products such as bread is a technological challenge due to the important role of the gluten network in their development. However, other products, such as cakes and cookies usually made with wheat flour, can easily be made with gluten-free starches or flours since gluten does not play an essential role in their production. To replace wheat flour in these elaborations it is necessary to resort to gluten-free starches and/or flours and to gluten substitutes. Additionally, it can be convenient to incorporate other ingredients such as proteins, fibers, sugars or oils, as well as to modify their quantities in wheat flour formulations. Regarding gluten-free flours, it will also be necessary to know the parameters that influence their functionality in order to obtain regular products. These problems have originated a lower availability of gluten-free products which have a worse texture and are less tasty and more expensive than their homologues with gluten. These problems have been partially solved thanks to research on these types of products, their ingredients and their production methods. In recent years, studies about the nutritional improvement of these products have increased. This chapter delves into the main ingredients used in the production of gluten-free products, the processes for making gluten-free breads, cakes and cookies, and the nutritional quality of these products.

Color, Starch Digestibility, and In Vitro Fermentation of Roasted Highland Barley Flour with Different Fractions

Highland barley (HB) is commonly milled into flour for direct consumption or further processed with other food formulations. Nevertheless, the association between milling and HB flour properties remains lacking. This work studied the effect of particle sizes (coarse, 250–500 μm; medium, 150–250 μm; fine, <150 μm) on physicochemical and nutritional properties of raw and sand-roasted HB flour. Gelatinization enthalpy decreased with increasing particle sizes of raw HB flour, while no endothermic transitions were observed in sand-roasted flour. Sand roasting destroyed starch granules and decreased short-range molecular order. Starch digestibility increased while total short-chain fatty acids (SCFAs) production decreased with decreasing particle sizes in all samples. The relative crystallinity of sand-roasted HB flour decreased by 80–88% compared with raw samples. Sand roasting raised in vitro starch digestibility, while total SCFAs during in vitro fecal fermentation decreased. Sand-roasted HB flour with particle sizes <150 μm had the highest starch digestibility (94.0%) but the lowest production of total SCFAs (1.89–2.24 mM). Pearson’s correlation analysis confirmed the relationship between the nutritional qualities of HB flour and milling.

Effects of Tartary Buckwheat Bran Flour on Dough Properties and Quality of Steamed Bread

Steamed bread is a traditional staple food of China. Replacing wheat flour (WF) with Tartary buckwheat is expected to improve the nutritional value of steamed bread. In this study, Tartary buckwheat flour (TBF), Tartary buckwheat bran flour (TBBF), and Tartary buckwheat core flour (TBCF) were prepared, their composition and physicochemical properties were compared. It was found that TBBF had higher protein and rutin contents, so its antioxidant activity and dough rheological properties were obviously superior to those of TBF and TBCF. When TBBF was mixed with WF, its weight proportion in the blend (W_bran) had a significant effect on the dough rheological properties. When W_bran was 30%, the dough had the optimal mixing tolerance, and when W_bran exceeded 30%, it caused dilution effect, weakening the gluten network. With the increase of W_bran, the color of the steamed bread developed by the TBBF–WF blend gradually darkened and yellowed, the specific volume declined, and its hardness, gumminess, and chewiness ascended gradually. The appropriate addition of TBBF (W_bran = 10% and 30%) was beneficial to cell diameter and volume of steamed bread, but the further rise of W_bran would destroy its gas retention ability. The predicted glycemic index (pGI) of steamed bread declined significantly with the increasing W_bran.

Quality improvement effects of electrolyzed water on rice noodles prepared with semidry-milled rice flours

To investigate the effects of electrolyzed water treatment on the qualities of rice noodles prepared with semidry- milled rice flour, pasting properties and thermal properties of rice flour, and the cooking and textural properties of rice noodles were determined. Higher peak viscosity and lower melting enthalpy were observed in electrolyzed water (EW) treated rice flour. The hardness, gumminess and chewiness of rice noodle in slightly acidic electrolyzed water treated rice noodles with available chlorine concentration (ACC) 20.32 mg/L were increased significantly (p < 0.05). The cooking loss decreased significantly in strong acidic electrolyzed water treated noodles with ACC 10.09 mg/L treatment (p < 0.05). The results indicated that EW could promote the gelatinization of rice flour, and improve the textural qualities of rice noodles. Therefore EW was appropriate to be used in rice noodle production.

Effects of milling methods on the properties of glutinous rice flour and sweet dumplings

Glutinous rice flour (GRF) was prepared using three milling process (wet milling, low temperature impact milling (dry milling), and roller milling (dry milling)) to investigate their effects on the physicochemical properties of glutinous rice flour and sweet dumplings prepared with that flour. Results revealed that a method of grinding used in the milling process had a significant (P < 0.05) effect on the properties of GRF and the resulting sweet dumplings. Dry milling (low temperature impact milling and roller milling) resulted in higher damaged starch content and coarser particle size than wet milling. Dry-milled flour exhibited a significantly lower hunter whiter value, apparent viscosity, pasting temperature, enthalpy value, and degree of crystalline compared to the wet-milling method. Dry milling significantly decreased the smoothness of the surface, whiteness value, transmittance of soup, resilience of dumplings, as well as increased the cracking rate and water loss during the fast-freeze. The obtained results could be used as reference for improving sweet dumpling made from dry-milled GRF.

Evaluation of non-starch polysaccharide addition in Turkish noodles: ELECTRE techniques approach

In the present study, the effects of non-starch polysaccharide addition into noodle samples were determined in uncooked and cooked noodle samples from cooking, physicochemical, textural, and sensorial aspects. Turkish-type noodles were obtained using apple (AFN), carrot (CFN), inulin (IFN), and pea (PFN) fibers among the non-starch polysaccharides. Moreover, the sensory analyses were performed using elimination et choixtraduisant la realite-elimination and choice translating reality (ELECTRE), one of the multi-criteria decision-making approach methods. The cooking loss values were found to be low in the final products containing a high amount of dietary fibers. The hardest product among the cooked noodles was the noodle produced using pea fiber that was also the one with the lowest water absorption value. Because of the different characteristics of dietary fibers, the noodles also have different properties. Based on the criteria selected as a result of the ELECTRE analysis performed for sensorial analysis, the most preferred product following the control sample was found to be the IFN sample. The others were ranked as the ones obtained using pea, carrot, and apple fiber.

Functional Characterization of Marigold Powder as a Food Ingredient for Lutein-Fortified Fresh Noodles

Marigold powder was utilized as a food ingredient to produce lutein-fortified fresh noodles for eye health, and its functionalities were characterized in terms of thermo-rheological, structural, and antioxidant properties. The pasting parameters and starch-gelatinization enthalpy values of wheat flour had a tendency to decrease with increasing levels of marigold powder. The use of marigold powder led to decreases in the storage and loss moduli of wheat flour pastes by weakening their cellular microstructure, which was confirmed by the scanning electron microscopic images. When marigold powder was incorporated into the formulation of fresh noodles, the cooking loss and water absorption of the noodles were not negatively affected at a level of 2% (w/w). Also, the noodles with 2% marigold powder were not significantly different from the control for the maximum resistance to extension. The levels of lutein in the noodles prepared with marigold powder (61.2 to 204.9 mg/100 g) were reduced by almost 50% after cooking. However, they seemed to satisfy the recommended daily dose of lutein for visual functions. Moreover, the use of marigold powder provided antioxidant properties for noodles by enhancing the 2,2′-diphenyl-1-picrylhydrazyl (DPPH) and 2,2-azino-bis-3-ethylbenzothiazoline-6-sulfonic acid (ABTS) radical-scavenging activities.

The quality of gluten-free bread made of brown rice flour prepared by low temperature impact mill

Our previous work reported that the brown rice flour prepared by low temperature impact mill possessed excellent physicochemical properties. The performance of brown rice flour in making gluten-free bread was further investigated. It was found that the starch crystal structure was destroyed and the damaged starch content increased as the particle size of brown rice flour decreased. The interaction between the starch and water in the model dough and the matrix structures among the endosperm masses were enhanced as the particle size decreased, making the gluten-free dough more viscoelastic. However, dough made with finer flour was too sticky, which limited the expansion of dough. Gluten-free bread prepared with medium-sized brown rice flour had favorable quality characterized by large specific volume, low hardness, numerous and homogeneous gas cells.

Effects of electron-beam irradiation on inoculated Listeria innocua, microbiological and physicochemical quality of fresh noodles during refrigerated storage

As a nonthermal sterilization technology, electron-beam irradiation (EBI) has attracted great interests for microbial inactivation in food preservation. In this study, the inactivation of inoculated Listeria innocua, natural microbiota, and quality of fresh noodles treated by EBI during refrigerated storage were evaluated. Results showed that the initial L. innocua population (6.38 log CFU/g) was significantly reduced to an undetectable level by treatment with 3.0 kGy EBI. Moreover, treatment with 3 kGy EBI significantly reduced the initial total bacteria counts and fungal counts (mold and yeast) from 5.66 and 3.15 log CFU/g to 2.90 and 2.11 log CFU/g, respectively. However, along with the storage process, the inoculated L. innocua and natural microbiota were recovered resulting in the increased populations of the spoilage microorganisms. Increasing the dose of EBI to 4.0 kGy or 5.0 kGy, the L. innocua population was inhibited to the undetectable level and the microbiological quality of the fresh noodles was kept in the acceptable level during the 28 day storage. In addition, changes of the physicochemical indicators including pH value, color, cooking characteristics, texture, and sensory of fresh noodles treated with EBI were delayed during storage. These results reveal that EBI treatment can improve the microbiological safety and shelf life of fresh noodles without impairing quality.