Sonochemistry and sonoprocessing: the link, the trends and (probably) the future

GC-MS metabolomics of French lettuce (Lactuca Sativa L. var capitata) leaves exposed to bisphenol A via the hydroponic media

INTRODUCTION

Bisphenol A (BPA), an organic compound used to produce polycarbonate plastics and epoxy resins, has become a ubiquitous contaminant due to its high-volume production and constant release to the environment. Plant metabolomics can trace the stress effects induced by environmental contaminants to the variation of specific metabolites, making it an alternative way to study pollutants toxicity to plants. Nevertheless, there is an important knowledge gap in metabolomics applications in this area.

OBJECTIVE

Evaluate the influence of BPA in French lettuce (Lactuca Sativa L. var capitata) leaves metabolic profile by gas chromatography coupled to mass spectrometry (GC-MS) using a hydroponic system.

METHODS

Lettuces were cultivated in the laboratory to minimize biological variation and were analyzed 55 days after sowing (considered the plant's adult stage). Hexanoic and methanolic extracts with and without derivatization were prepared for each sample and analyzed by GC-MS.

RESULTS

The highest number of metabolites was obtained from the hexanoic extract, followed by the derivatized methanolic extract. Although no physical differences were observed between control and contaminated lettuce leaves, the multivariate analysis determined a statistically significant difference between their metabolic profiles. Pathway analysis of the most affected metabolites showed that galactose metabolism, starch and fructose metabolism and steroid biosynthesis were significantly affected by BPA exposure.

CONCLUSIONS

The preparation of different extracts from the same sample permitted the determination of metabolites with different physicochemical properties. BPA alters the leaves energy and membrane metabolism, plant growth could be affected at higher concentrations and exposition times.

Exploiting Sound for Emerging Applications of Extracellular Vesicles

Extracellular vesicles are nano- to microscale, membrane-bound particles released by cells into extracellular space, and act as carriers of biomarkers and therapeutics, holding promising potential in translational medicine. However, the challenges remain in handling and detecting extracellular vesicles for disease diagnosis as well as exploring their therapeutic capability for disease treatment. Here, we review the recent engineering and technology advances by leveraging the power of sound waves to address the challenges in diagnostic and therapeutic applications of extracellular vesicles and biomimetic nanovesicles. We first introduce the fundamental principles of sound waves for understanding different acoustic-assisted extracellular vesicle technologies. We discuss the acoustic-assisted diagnostic methods including the purification, manipulation, biosensing, and bioimaging of extracellular vesicles. Then, we summarize the recent advances in acoustically enhanced therapeutics using extracellular vesicles and biomimetic nanovesicles. Finally, we provide perspectives into current challenges and future clinical applications of the promising extracellular vesicles and biomimetic nanovesicles powered by sound.

Graphite/carbon-doped TiO2 nanocomposite synthesized by ultrasound for the degradation of diclofenac

Graphite/C-doped TiO2 nanocomposite was synthesized at room temperature using a simple, impressive, and indirect sonication (20 kHz) by the cup horn system. Tetrabutyltitanate as the precursor of titanium and graphite (G) as the carbon source was used in the preparation of nanocomposite as a photocatalyst. The molar ratio of G/TiO2 as a key parameter was investigated in the synthesis of G/C-doped TiO2. The obtained materials were widely characterized using XRD, SEM, TEM, FTIR, XPS, and UV-Vis diffuse reflectance techniques. The UV-Vis diffuse reflectance spectroscopy results showed that the edge of light absorption of nanocomposite was distinctly red-shifted to the visible area via carbon doping. The XPS outcomes acknowledged the existence of the C, Ti, and O in the photocatalyst. The composite showed an enhancement in the dissociation efficiency of photoinduced charge carriers through the doping process. The photocatalytic activity of the synthesized nanocomposite was checked with diclofenac (DCF) as a pharmaceutical contaminant. The results displayed that G/C-doped TiO2 represented better photocatalytic performance for DCF than TiO2. This was due to the excellent crystallization, intense absorption of visible light, and the impressive separation of photoinduced charge carriers. Various active species such as •OH, •O2¯, h+, and H2O2 play a role in the degradation of DFC. Therefore, different scavengers were used and the role of each one in degradation was investigated. According to the obtained results, •O2¯ radical showed a major role in the photocatalytic process. This work not only proposes a deep insight into the photosensitization-like mechanism by using G-based materials but also develops new photocatalysts for the removal of emerging organic pollutants from waters using sunlight as available cheap energy.

Design and One-Pot Ultrasound Synthesis of Inorganic Base-Promoted Fluorescent Ligand-Gated Ion Channel Fused Arylpyrazole Sulfonamide Skeletons to Enhance Phloem Mobility and Insecticidal Activity as GABA and nACh Receptors Inhibitors

Ligand-gated ion channels are essential in living organisms, and sulfonamides have antibacterial effects and can be readily coordinated with metal ions with good biological activity. A series of fluorescent ligand-gated ion channel fused arylpyrazole sulfonamide skeletons (APSnM) were synthesized based on a one-pot ultrasound strategy promoted by an inorganic base. APSnM had a high fluorescence quantum yield and a large Stokes shift in ethanol solvent. The ligand bonded ions took on a different color from the ligand and can be used as a probe to detect their own residue on plant surfaces. Their hydrophobic parameters and the fluorescence distribution in Chinese cabbage leaves indicated that APSnM significantly increased the phloem mobility of the plant. The insecticidal activity of APS3Na was higher (LC50 = 7.2423 μg/mL) than that of fipronil (15.2312 μg/mL) against Plutella xylostella, and the mechanism of high insecticidal activity of APS3Na was simulated by molecular docking, which confirmed its strong interactions with the GABA and nACh receptors of Plutella xylostella. Analysis of the crystal structure of these ligand-gated ion channels further confirmed the consistency of their structure and biological activity.

Multi-frequency therapeutic ultrasound: A review

Focused ultrasound is a noninvasive, radiation-free and real-time therapeutic approach to treat deep-seated targets, which benefits numerous diseases otherwise requiring surgeries. Treatment efficiency is one of the key factors determining therapeutic outcomes, but improving it solely by increasing the total power can be limited by the performance of general ultrasound devices. To address this, multi-frequency therapeutic ultrasound, using additional ultrasound waves of different frequencies on top of the standard single-frequency wave, provides a promising method for treatment efficiency enhancement with limited power. Several applications and numerical works have demonstrated its superiority on treatment enhancement. This paper presents an overview of the mechanisms, implementations, applications and decisive parameters of the multi-frequency therapeutic ultrasound, which could help to pave the way for better understanding and further developing this technology in the future.

Ultrasonics and sonochemistry: Editors' perspective

Ultrasonic waves can induce physical and chemical changes in liquid media via acoustic cavitation. Various applications have benefitted from utilizing these effects, including but not limited to the synthesis of functional materials, emulsification, cleaning, and processing. Several books and review articles in the public domain cover both fundamental and applied aspects of ultrasonics and sonochemistry. The Editors of the Ultrasonics Sonochemistry journal possess diverse expertise in this field, from theoretical and experimental aspects of acoustic cavitation to materials synthesis, environmental remediation, and sonoprocessing. This article provides Editors' perspectives on various aspects of ultrasonics and sonochemistry that may benefit students and early career researchers.

Automation and Optimization of Rat Heart Decellularization Using a Vibrating Fluid Column

This paper presents the validation of a software application to optimize the discoloration process in simulated hearts and to automate and determine the final moment of decellularization in rat hearts using a vibrating fluid column. The implemented algorithm specifically for the automated verification of a simulated heart's discoloration process was optimized in this study. Initially, we used a latex balloon containing enough dye to reach the opacity of a heart. The complete discoloration process corresponds to complete decellularization. The developed software automatically detects the complete discoloration of a simulated heart. Finally, the process stops automatically. Another goal was to optimize the Langendorff-type experimental apparatus, which is pressure-controlled and equipped with a vibrating fluid column that shortens the decellularization time by mechanically acting directly on cell membranes. Control experiments were performed with the designed experimental device and the vibrating liquid column using different decellularization protocols for hearts taken from rats. In this work, we used a commonly utilized solution based on sodium dodecyl sulfate. Ultraviolet spectrophotometry was used to measure the evolution of the dye concentration in the simulated hearts and, similarly, to determine the concentrations of deoxyribonucleic acid (DNA) and proteins in the rat hearts.

Biomechanical Sensing Using Gas Bubbles Oscillations in Liquids and Adjacent Technologies: Theory and Practical Applications

Gas bubbles present in liquids underpin many natural phenomena and human-developed technologies that improve the quality of life. Since all living organisms are predominantly made of water, they may also contain bubbles-introduced both naturally and artificially-that can serve as biomechanical sensors operating in hard-to-reach places inside a living body and emitting signals that can be detected by common equipment used in ultrasound and photoacoustic imaging procedures. This kind of biosensor is the focus of the present article, where we critically review the emergent sensing technologies based on acoustically driven oscillations of bubbles in liquids and bodily fluids. This review is intended for a broad biosensing community and transdisciplinary researchers translating novel ideas from theory to experiment and then to practice. To this end, all discussions in this review are written in a language that is accessible to non-experts in specific fields of acoustics, fluid dynamics and acousto-optics.

Ultrasound-Assisted Modification of Insoluble Dietary Fiber from Chia (Salvia hispanica L.) Seeds

Modification of insoluble dietary fiber (IDF) to soluble dietary fiber (SDF) improves not only the various health benefits but also the functional properties for improved product development. This research aimed to examine the effects of sonication treatment on the functional and physicochemical properties with possible structural changes in chia seeds dietary fiber. Central composite design was applied to optimize the sonication treatment process (amplitude 55%, time 20 min, and temperature 40°C) based on the oil holding capacity (OHC) and water holding capacity (WHC) as responses. Under these optimum conditions, ultrasound-treated IDF exhibited better functional and physicochemical properties such as OHC, WHC, glucose adsorption capacity (GAC), and water retention capacity (WRC) than untreated IDF. Fourier-transform infrared spectroscopy further confirmed the structural changes in treated and untreated IDF to explain the changes in the studied parameters.

Continuous and pulsed ultrasound pectin extraction from navel orange peels

Pectin is a valuable product (up to 30 $kg^-1) that makes-up 20-30% of an orange's peel. The commercial extraction is lengthy (up to 6h) and energy intensive as it requires heating aqueous solutions (60-100 °C). Ultrasound speeds up the extraction process reducing processing time by macroscopic and microscopic mixing by acoustic cavitation. We adopted an ultrasonic horn to deliver a rated power of 500W at amplitudes of 20%, 40%, and 60% with and without pulsation to extract pectin from waste orange peels. These correspond to power densities of 0.08Wml^-1, 0.16Wml^-1 and 0.24Wml^-1, respectively. The extractions operated at a pH of either 2 or 3. The experimental data agree with the fitted values from the statistical model (R²=95.5%). The model confirms our predictions that yield increases with amplitude/power density and decreasing pH. The highest yield was (11%) at a pH of 2 and with continuous ultrasonic irradiation at a power density of 0.24Wml^-1. There is only a 1.3% difference between this datum and pulse ultrasound mode (1 s on/1 s off) at the same conditions - a Student's t test confirmed that there was no significant difference in yield between continuous and pulse mode. However, pulsing is more efficient in that it consumes less than half the energy of continuous operation (80kJ vs. 190kJ).

Guanidine functionalized core-shell structured magnetic cobalt-ferrite: an efficient nanocatalyst for sonochemical synthesis of spirooxindoles in water

Core/shell nanoparticles have a wide range of applications in the science of chemistry and biomedicine. The core-shell material can be different and modified by changing the ingredients or the ratio of core to the shell. In this research, a CoFe₂O₄@SiO₂-guanidine nanocomposite was prepared and identified as an efficient catalyst for the one-pot synthesis of spirooxindole derivatives in water under ultrasonic irradiation conditions. The advantages of this method are in its simplicity, saving costs and energy, high yields, short reaction times, environmental friendliness, reusability and easy recovery of the catalyst using an external magnet. The catalyst was characterized by XRD, SEM, TEM, EDX, FT-IR, TGA and VSM techniques.

Ultrasound-Enhanced Self-Exciting Photodynamic Therapy Based on Hypocrellin B

Peroxalate CL as an energy source to excite photosensitizers has attracted tremendous attention in photodynamic therapy (PDT). In this work, peroxyoxalate CPPO and hypocrellin B (HB)-based nanoparticles (CBNPs) for ultrasound (US)-enhanced self-exciting PDT were designed and prepared. CBNPs showed an excellent therapeutic effect against cancer cells with the assistance of US. This US-enhanced-chemiluminescence system avoids the dependence on external light and provides an example for inspiring more effective and precise strategies for cancer treatment.

Effect of switching ultrasonic amplitude in preparing a hybrid of fullerene (C60) and gallium oxide (Ga2O3)

In this study, we proposed 'switching ultrasonic amplitude' as a new strategy of applying ultrasonic energy to prepare a hybrid of buckminsterfullerene (C₆₀) and gallium oxide (Ga₂O₃), C₆₀/Ga₂O₃. In the proposed method, we switched the ultrasonic amplitude from 25% to 50% (by 5% amplitude per 10 min, within 1 h of ultrasonic irradiation) for the sonochemical treatment of a heterogeneous aqueous mixture of C₆₀ and Ga₂O₃ by a probe-type ultrasonic horn operating at 20 kHz. We found that compared to the conventional techniques associated with high amplitude oriented ultrasonic preparation of functional materials, switching ultrasonic amplitude can better perform in preparing C₆₀/Ga₂O₃ with respect to avoiding titanium (Ti) as an impurity generating from the tip erosion of a probe-type ultrasonic horn during high amplitude ultrasonic irradiation in an aqueous medium. Based on SEM/EDX analysis, the quantity of Ti (wt.%) in C₆₀/Ga₂O₃ prepared by the proposed technique of switching ultrasonic amplitude was found to be 1.7% less than that prepared at 50% amplitude of ultrasonic irradiation. The particles of C₆₀/Ga₂O₃ prepared by different modes of amplitude formed large (2-12 μm) aggregates in their solid phase.Whereas, in the aqueous medium, they were found to disperse in their nano sizes. The minimum particle size of the as-synthesized C₆₀/Ga₂O₃ in an aqueous medium prepared by the proposed method of switching ultrasonic amplitude reached to approximately 467 nm. Comparatively, the minimum particle sizes were approximately 658 nm and 144 nm, using 25% and 50% amplitude, respectively. Additionally, Ga₂O₃ went under hydration during ultrasonic irradiation. Moreover, due to the electron cloud interference from C₆₀ in the hybrid structure of C₆₀/Ga₂O₃, the vibrational modes of Ga₂O₃ were Raman inactive in C₆₀/Ga₂O₃.

Shape stability of a gas bubble in a soft solid

Predicting the onset of non-spherical oscillations of bubbles in soft matter is a fundamental cavitation problem with implications to sonoprocessing, polymeric materials synthesis, and biomedical ultrasound applications. The shape stability of a bubble in a Kelvin-Voigt viscoelastic medium with nonlinear elasticity, the simplest constitutive model for soft solids, is analytically investigated and compared to experiments. Using perturbation methods, we develop a model reducing the equations of motion to two sets of evolution equations: a Rayleigh-Plesset-type equation for the mean (volume-equivalent) bubble radius and an equation for the non-spherical mode amplitudes. Parametric instability is predicted by examining the natural frequency and the Mathieu equation for the non-spherical modes, which are obtained from our model. Our theoretical results show good agreement with published experiments of the shape oscillations of a bubble in a gelatin gel. We further examine the impact of viscoelasticity on the time evolution of non-spherical mode amplitudes. In particular, we find that viscosity increases the damping rate, thus suppressing the shape instability, while shear modulus increases the natural frequency, which changes the unstable mode. We also explain the contributions of rotational and irrotational fields to the viscoelastic stresses in the surroundings and at the bubble surface, as these contributions affect the damping rate and the unstable mode. Our analysis on the role of viscoelasticity is potentially useful to measure viscoelastic properties of soft materials by experimentally observing the shape oscillations of a bubble.

Innovative Hurdle Technologies for the Preservation of Functional Fruit Juices

Functional nutrition, which includes the consumption of fruit juices, has become the field of interest for those seeking a healthy lifestyle. Functional nutrition is also of great interest to the food industry, with the aims of improving human health and providing economic prosperity in a sustainable manner. The functional food sector is the most profitable part of the food industry, with a fast-growing market resulting from new sociodemographic trends (e.g., longer life expectancy, higher standard of living, better health care), which often includes sustainable concepts of food production. Therefore, the demand for hurdle technology in the food industry is growing, along with the consumption of minimally processed foods, not only because this approach inactivates microorganisms in food, but because it can also prolong the shelf life of food products. To preserve food products such as fruit juices, the hurdle technology approach often uses non-thermal methods as alternatives to pasteurization, which can cause a decrease in the nutritional value and quality of the food. Non-thermal technologies are often combined with different hurdles, such as antimicrobial additives, thermal treatment, and ultraviolet or pulsed light, to achieve synergistic effects and overall quality improvements in (functional) juices. Hence, hurdle technology could be a promising approach for the preservation of fruit juices due to its efficiency and low impact on juice quality and characteristics, although all processing parameters still require optimization.

A new synthetic methodology for pyridinic sucrose esters and their antibacterial effects against Gram-positive and Gram-negative strains

Described are the development of a new synthetic method using ultrasonic irradiation and sodium methoxide as catalyst for a series of pyridinic sucrose esters (py-SEs), derived from transesterification of sucrose with picolinic, nicotinic and isonicotinic methyl esters. The reaction was optimized using a 3² x 2 experimental design, the reaction time, temperature and sucrose: methyl ester molar ratio being evaluated. The method proved to be efficient for obtaining monosubstituted esters (≥83%) with high methyl ester consumption (≥79%). The monosubstituted py-SEs were isolated by semipreparative HPLC, characterized by high-resolution mass spectrometry, calorimetry, vibrational spectroscopy, and ¹H and ¹³C NMR. The py-SEs were tested against E. coli, S. aureos, and P. aeruginosa bacteria with minimum inhibitory concentration values equal or inferior to the reference drugs for both E. coli and P. aeruginosa.

Effect of Ultrasound on the Green Selective Oxidation of Benzyl Alcohol to Benzaldehyde

Oxidation of alcohols plays an important role in industrial chemistry. Novel green techniques, such as sonochemistry, could be economically interesting by improving industrial synthesis yield. In this paper, we studied the selective oxidation of benzyl alcohol as a model of aromatic alcohol compound under various experimental parameters such as substrate concentration, oxidant nature and concentration, catalyst nature and concentration, temperature, pH, reaction duration, and ultrasound frequency. The influence of each parameter was studied with and without ultrasound to identify the individual sonochemical effect on the transformation. Our main finding was an increase in the yield and selectivity for benzaldehyde under ultrasonic conditions. Hydrogen peroxide and iron sulfate were used as green oxidant and catalyst. Coupled with ultrasound, these conditions increased the benzaldehyde yield by +45% compared to silent conditions. Investigation concerning the transformation mechanism revealed the involvement of radical species.

Eco-compatible sonochemical synthesis of 8-aryl-7,8-dihydro-[1,3]-dioxolo[4,5-g]quinolin-6(5H)-ones using green TiO2

A green and an aqueous-mediated sonochemical synthesis of 8-aryl-7,8-dihydro-[1,3]-dioxolo[4,5-g]quinolin-6(5H)-ones from the multi-component reaction of Meldrum's acid, 3,4-methylenedioxy aniline and various aromatic aldehydes is described in the presence of catalytic amount of TiO₂ NPs for the first time using high power sonicator. Initially, TiO₂ NPs has also been synthesized by the biochemical method using leaf extract of Origanum majorana plant as a reducing and capping agent under sonication. Under the sonication, the catalytic activity of synthesized TiO₂ NPs found to be excellent for synthesis of a series of 8-aryl-7,8-dihydro-[1,3]-dioxolo[4,5-g]quinolin-6(5H)-ones with operational simplicity, high yield under green reaction conditions without any environmental issue. The structure of TiO₂ NPs was characterized by FT-IR, SEM, TEM, XRD and EDX studies.

Enhancement in mechanical quality factors of poly phenylene sulfide under high-amplitude ultrasonic vibration through thermal annealing

Our previous study shows that poly phenylene sulfide (PPS) provides relatively high mechanical quality factors (Q factors) at ultrasonic frequency compared to other commonly-used functional polymers, and has potential as the vibrating body of a functional ultrasonic transducer. Since PPS has semicrystalline frameworks, its Q factors may be enhanced through thermal annealing. Prior to examining this feasibility, we developed a method for estimating Q factors under high-amplitude longitudinal vibration. Q factor is originally defined as the ratio of the reactive energy to the dissipated energy, both of which are calculated from the vibration velocities on the outer surface of a cylindrical specimen. Using this method, we experimentally investigated how annealing temperatures and times affect Q factors of PPS. The results demonstrate that thermal annealing is an effective way to enhance Q factors of PPS at the heating temperatures of 100 °C and 150 °C, relatively high compared to the glass transition temperature of PPS (90-95 °C). The Q factors at several tens of kilohertz are almost doubled after annealing owing to the enhancements in degrees of crystallinity. As the annealing time increases, the Q factors initially become higher, and gradually approach their saturated values at a sufficiently long time. Besides, annealing temperatures affect the change rates in Q factors, but have no observable effect on the saturated Q factors.

Ultrasonic accelerated coupling reaction using magnetically recyclable bis (propyl molononitril) Ni complex nanocatalyst: A novel, green and efficient synthesis of biphenyl derivatives

A novel, green and rapid sonochemical research to preparation of the biphenyls was carried out through the coupling reaction between various aryl halides and phenylboronic acid by using bis(propyl malononitrile) Ni (0) complex (NiFe₂O₄@SiO₂-BPMN-Ni) as an efficient nano catalyst. The catalyst can be recycled via an external magnet and reused several times without considerable loss of its catalytic activity. Compare to the previous works, this procedure has advantages such as easy workup, high yields of products, environmentally benign and short reaction times. The novel nickel catalyst prepared and characterized by FT-IR, XRD, SEM, EDX, TGA and VSM techniques.

Effect of carbon tetrachloride on the luminol sonochemiluminescence reaction kinetics during multibubble cavitation

The sonochemiluminescence (SCL) of luminol reaction was studied in alkaline medium using a dissolution of luminol, sodium carbonate, hydrogen peroxide and carbon tetrachloride. The presence of carbon tetrachloride enhances the SCL reaction up to allow the study of the reaction in real time using a cell phone video camera. This experimental setup allows the study of the cavitation dynamics in real time and through all the reactor, including homogeneous and heterogeneous cavitation zones. Finally, it was tested the effect of ethanol, the ionic strength and pH on the SCL.

Energy efficient room temperature synthesis of cardanol-based novolac resin using acoustic cavitation

The present study deals with synthesis of cardanol-cased novolac (CBN) resin by the condensation reaction between cardanol and formaldehyde using acoustic cavitation. It is a step-growth polymerization which occurs in the presence of an acid catalyst such as adipic acid, citric acid, oxalic acid, sulphuric acid and hydrochloric acid. CBN was also synthesised by a conventional method for the sake of comparison of techniques. The effect of molar ratio, effect of catalyst, effect of different catalyst and effect of power on the conversion to CBN has been studied. The synthesised CBN was characterized using the Fourier Transform Infra Red Spectroscopy (FTIR), Gel Permeation Chromatography (GPC), Nuclear Magnetic Resonance (NMR) Spectroscopy and Thermogravimetric Analysis (TGA). The reaction was monitored by the Acid value, free formaldehyde content and viscosity of the synthesised product. The reaction time required for the conventionally synthesised CBN was 5 h (300 min) with 120 °C as an operating temperature while sonochemically the time reduced to 30 min at room temperature. The amount of time and energy saved can be quantified. Ultrasound facilitated synthesis was found to be an energy efficient and time-saving method for the synthesis of novolac resin.

Solvent effect in sonochemical synthesis of metal-alloy nanoparticles for use as electrocatalysts

Nanomaterials are now widely used in the fabrication of electrodes and electrocatalysts. Herein, we report a sonochemical study of the synthesis of molybdenum and palladium alloy nanomaterials supported on functionalized carbon material in various solvents: hexadecane, ethanol, ethylene glycol, polyethylene glycol (PEG 400) and Ionic liquids (ILs). The objective was to identify simple and more environmentally friendly design and fabrication methods for nanomaterial synthesis that are suitable as electrocatalysts in electrochemical applications. The particles size and distribution of nanomaterials were compared on two different carbons as supports: activated carbon and multiwall carbon nanotubes (MWCNTs). The results show that carbon materials functionalized with ILs in ethanol/deionized water mixture solvent produced smaller particles sizes (3.00 ± 0.05 nm) with uniform distribution while in PEG 400, functionalized materials produced 4.00 ± 1 nm sized particles with uneven distribution (range). In hexadecane solvents with Polyvinylpyrrolidone (PVP) as capping ligands, large particle sizes (14.00 ± 1 nm) were produced with wide particle size distribution. The metal alloy nanoparticles produced in ILs without any external reducing agent have potential to exhibit a higher catalytic activity due to smaller particle size and uniform distribution.

Sonochemical growth of nanomaterials in carbon nanotube

Recent achievements in investigations of carbon nanotubes (CNTs) filled with ternary chalcohalides (antimony sulfoiodide (SbSI) and antimony selenoiodide (SbSeI)) are presented. Parameters of sonochemical encapsulation of nanocrystalline semiconducting ferroelectric SbSI-type materials in CNTs are reported. This low temperature technology is convenient, fast, efficient and environmentally friendly route for producing novel type of hybrid materials useful for nanodevices. Structure as well as optical and electrical properties of SbSI@CNTs and SbSeI@CNTs are described. Advantages of ultrasonic joining of such filled CNTs with metal microelectrodes are emphasized. The possible applications of these nanomaterials as gas sensors are shown.

Ultrasound-Assisted Synthesis of Nanostructured Oxide Materials

This chapter is focused on the use of high intensity ultrasound for the preparation of nanostructured materials with an emphasis on recent prominent examples of the production of dense or porous metal oxides through sonochemical and ultrasonic spray pyrolysis routes. Sonochemistry enables the synthesis of oxides that are often unachievable by traditional methods or affords known materials with shape, size, and nano/microstructure control under fast reaction conditions. The fundamental principles of acoustic cavitation, as well as the main ultrasonic parameters affecting the cavitation phenomenon, are first summarized. Next, the applications of ultrasound in the synthesis of nanostructured oxide materials following both preparation methods are reviewed. Particular focus is given to the ultrasound-assisted synthesis of metal oxide nanoparticles for energy applications.

Ultrasound-assisted acid hydrolysis of cellulose to chemical building blocks: Application to furfural synthesis

In this work, the use of ultrasound energy for the production of furanic platforms from cellulose was investigated and the synthesis of furfural was demonstrated. Several systems were evaluated, as ultrasound bath, cup horn and probe, in order to investigate microcrystalline cellulose conversion using simply a diluted acid solution and ultrasound. Several acid mixtures were evaluated for hydrolysis, as diluted solutions of HNO₃, H₂SO₄, HCl and H₂C₂O₄. The influence of the following parameters in the ultrasound-assisted acid hydrolysis (UAAH) were studied: sonication temperature (30 to 70°C) and ultrasound amplitude (30 to 70% for a cup horn system) for 4 to 8molL^-1 HNO₃ solutions. For each evaluated condition, the products were identified by ultra-performance liquid chromatography with high-resolution time-of-flight mass spectrometry (UPLC-ToF-MS), which provide accurate information regarding the products obtained from biomass conversion. The furfural structure was confirmed by nuclear magnetic resonance (¹H and ¹³C NMR) spectroscopy. In addition, cellulosic residues from hydrolysis reaction were characterized using scanning electron microscopy (SEM), which contributed for a better understanding of physical-chemical effects caused by ultrasound. After process optimization, a 4molL^-1 HNO₃ solution, sonicated for 60min at 30°C in a cup horn system at 50% of amplitude, lead to 78% of conversion to furfural. This mild temperature condition combined to the use of a diluted acid solution represents an important contribution for the selective production of chemical building blocks using ultrasound energy.

Ultrasound-assisted extraction of rare-earth elements from carbonatite rocks

In view of the increasing demand for rare-earth elements (REE) in many areas of high technology, alternative methods for the extraction of these elements have been developed. In this work, a process based on the use of ultrasound for the extraction of REE from carbonatite (an igneous rock) is proposed to avoid the use of concentrated reagents, high temperature and excessive extraction time. In this pioneer work for REE extraction from carbonatite rocks in a preliminary investigation, ultrasonic baths, cup horn systems or ultrasound probes operating at different frequencies and power were evaluated. In addition, the power released to the extraction medium and the ultrasound amplitude were also investigated and the temperature and carbonatite mass/volume of extraction solution ratio were optimized to 70°C and 20mg/mL, respectively. Better extraction efficiencies (82%) were obtained employing an ultrasound probe operating at 20kHz for 15min, ultrasound amplitude of 40% (692Wdm^-3) and using a diluted extraction solution (3% v/v HNO₃+2% v/v HCl). It is important to mention that high extraction efficiency was obtained even using a diluted acid mixture and relatively low temperature in comparison to conventional extraction methods for REE. A comparison of results with those obtained by mechanical stirring (500rpm) using the same conditions (time, temperature and extraction solution) was carried out, showing that the use of ultrasound increased the extraction efficiency up to 35%. Therefore, the proposed ultrasound-assisted procedure can be considered as a suitable alternative for high efficiency extraction of REE from carbonatite rocks.

Sonochemical-assisted magnesium borate synthesis from different boron sources

In this study, sonochemical-assisted magnesium borate synthesis is studied from different boron sources. Various reaction parameters are successfully applied by a simple and green method. X-ray diffraction (XRD), Fourier transform infrared (FT-IR) and Raman spectroscopies are used to characterize the synthesized magnesium borates on the other hand surface morphologies are investigated by using scanning electron microscope (SEM). The XRD analyses showed that the products were admontite [MgO(B2O3)3 · 7(H2O)] with JCPDS (Joint Committee on Powder Diffraction Standards) no. of 01-076-0540 and mcallisterite [Mg2(B6O7(OH)6)2 · 9(H2O)] with JCPDS no. of 01-070-1902. The results that found in the spectroscopic studies were in a good agreement with characteristic magnesium borate bands in both regions of infra-red and visible. According to SEM results, obtained borates were in micro and sub-micro scales. By the use of ultrasonication, reaction yields were found between 84.2 and 97.9%. As a result, it is concluded that the sonochemical approach is a practicable synthesis method to get high efficiency and high crystallinity in the synthesis magnesium borate compounds.

Sonochemical oxidation of vanillyl alcohol to vanillin in the presence of a cobalt oxide catalyst under mild conditions

The heterogeneous oxidation of vanillyl alcohol to vanillin was investigated on new grounds under eco-friendly conditions in the presence of hydrogen peroxide as an oxidant and water as solvent, coupled with low frequency ultrasonic irradiation. The sono-Fenton-like-assisted vanillyl alcohol oxidation was performed with a high-surface area nanostructured spinel cobalt oxide catalyst exhibiting small crystallites size. The catalytic reaction was also carried out under conventional heating conditions for comparison purposes. The influence of the reaction parameters, namely catalyst loading and hydrogen peroxide concentration was studied with the aim of determining the optimum yield and selectivity to the desired vanillin product. The chemical effects of ultrasound (ability to generate hydroxyl radicals) along with increased mass transfer appeared to be key prerequisites for enhancing the efficiency of the process, while decreasing the overall energy consumption.

A review of engineering aspects of intensification of chemical synthesis using ultrasound

Cavitation generated using ultrasound can enhance the rates of several chemical reactions giving better selectivity based on the physical and chemical effects. The present review focuses on overview of the different reactions that can be intensified using ultrasound followed by the discussion on the chemical kinetics for ultrasound assisted reactions, engineering aspects related to reactor designs and effect of operating parameters on the degree of intensification obtained for chemical synthesis. The cavitational effects in terms of magnitudes of collapse temperatures and collapse pressure, number of free radicals generated and extent of turbulence are strongly dependent on the operating parameters such as ultrasonic power, frequency, duty cycle, temperature as well as physicochemical parameters of liquid medium which controls the inception of cavitation. Guidelines have been presented for the optimum selection based on the critical analysis of the existing literature so that maximum process intensification benefits can be obtained. Different reactor designs have also been analyzed with guidelines for efficient scale up of the sonochemical reactor, which would be dependent on the type of reaction, controlling mechanism of reaction, catalyst and activation energy requirements. Overall, it has been established that sonochemistry offers considerable potential for green and sustainable processing and efficient scale up procedures are required so as to harness the effects at actual commercial level.

Fermentation at non-conventional conditions in food- and bio-sciences by the application of advanced processing technologies

The interest in improving the yield and productivity values of relevant microbial fermentations is an increasingly important issue for the scientific community. Therefore, several strategies have been tested for the stimulation of microbial growth and manipulation of their metabolic behavior. One promising approach involves the performance of fermentative processes during non-conventional conditions, which includes high pressure (HP), electric fields (EF) and ultrasound (US). These advanced technologies are usually applied for microbial inactivation in the context of food processing. However, the approach described in this study focuses on the use of these technologies at sub-lethal levels, since the aim is microbial growth and fermentation under these stress conditions. During these sub-lethal conditions, microbial strains develop specific genetic, physiologic and metabolic stress responses, possibly leading to fermentation products and processes with novel characteristics. In some cases, these modifications can represent considerable improvements, such as increased yields, productivities and fermentation rates, lower accumulation of by-products and/or production of different compounds. Although several studies report the successful application of these technologies during the fermentation processes, information on this subject is still scarce and poorly understood. For that reason, the present review paper intends to assemble and discuss the main findings reported in the literature to date, and aims to stimulate interest and encourage further developments in this field.

A new topological structure for the Langevin-type ultrasonic transducer

In this paper, a new topological structure for the Langevin-type ultrasonic transducer is proposed and investigated. The two cylindrical terminal blocks are conically shaped with four supporting plates each, and two cooling fins are disposed at the bottom of terminal blocks, adjacent to the piezoelectric rings. Experimental results show that it has larger vibration velocity, lower temperature rise and higher electroacoustic energy efficiency than the conventional Langevin transducer. The reasons for the phenomena can be well explained by the change of mass, heat dissipation surface and force factor of the transducer. The proposed design may effectively improve the performance of ultrasonic transducers, in terms of the working effect, energy consumption and working life.

Sonochemistry – an innovative opportunity towards a one-pot three-component synthesis of novel pyridylpiperazine derivatives catalysed by meglumine in water

An unprecedented and expeditious synthetic strategy for rapid access to a diversity-oriented library of novel functionalized pyridyl piperazine derivatives is reported.

Effects of ultrasonic disintegration of excess sewage sludge

Breaking down sludge floc (sonodyspergation effect) and destruction of the cell membranes of microorganisms forming floc is a direct effect of ultrasonic disintegration of sludge excess. This results in release of organic material by liquid sludge (the sonolysis effect). Desired technological effects of the disintegration are: to shorten the hydrolytic phase of fermentation, to increase the production of biogas (source of renewable energy) and an increased mineralization (stability) of fermented sludge. The presented study demonstrates research covering thickened excess sludge of various physicochemical properties, collected from nine municipal sewage treatment plants. The sludge was subjected to ultrasonic disintegration using three differently constructed disintegrators and different proportions of sonification area. Direct effects of disintegration were monitored and recorded using selected indicators describing changes in the properties of sludge and increase of substance dispersed and dissolved in the supernatant liquid to be filtered. Studies have demonstrated that those (direct) effects of ultrasonic disintegration depend on the physicochemical properties of the sludge (foremost the concentration of dry solids) that determine their variable susceptibility to the disintegration methods. The direct effects also depend on optimal process conditions (which consist of the construction of the ultrasonic disintegrator), the geometric proportions of the sonication area and the operating parameters of disintegration (which could be appropriately matched to the characteristics of sludge). The most preferable results were obtained for ultrasonic disintegration of sludge with a dry matter concentration C 0 < 4.2 %. The highest effect of sonolysis-an almost 30-fold increase in the COD dissolved in the supernatant-was obtained for the sludge of lowest dry matter (C 0 = 2.0 %), which was sonicated in a reactor with a short transducer of the largest radiating surface area, as well as the lowest ratio between this area and area of reactor. The best effects of disagglomeration of flocks have corresponded with the high value of power density U UD = 880-900 WL(-1).