1
|
Deng M, Wei J, Du W, Qin Z, Zhang Z, Yang L, Yao L, Jiang W, Tang B, Ma X, Dai Z. High-Performance Carbon Molecular Sieve Membranes Derived from a PPA-Cross-linked Polyimide Precursor for Gas Separation. ACS APPLIED MATERIALS & INTERFACES 2024; 16:44927-44937. [PMID: 39152899 DOI: 10.1021/acsami.4c09795] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 08/19/2024]
Abstract
Carbon molecular sieve (CMS) membranes have emerged as attractive gas membranes due to their tunable pore structure and consequently high gas separation performances. In particular, polyimides (PIs) have been considered as promising CMS precursors because of their tunable structure, superior gas separation performance, and excellent thermal and mechanical strength. In the present work, polyphosphoric acid (PPA) was employed as both cross-linker and porogen, it created pores within the PI polymeric matrix, while it also effectively acting as a cross-linker to regulate the ultramicropores of the CMS membranes, thus simultaneously improving both permeability and selectivity of the CMS membranes. By employing PI/PPA hybrid with PPA content of 5 wt % as a precursor, the obtained CMS membrane exhibited a CO2 and He permeability of 1378.3 Barrer and 1431.4 Barrer, respectively, which was an approximately 10-fold increase compared to the precursor membrane. Under optimized conditions, the CO2/CH4 and He/CH4 selectivity of the obtained CMS membrane reached 81.5 and 89.9, respectively, which was 278% and 307% higher than that of the pristine PI membrane. In addition, the membrane exhibited good long-term stability during a one-week continuous test. This study clearly denoted PPA can be used for precisely tailoring the ultramicroporosity of CMS membranes.
Collapse
Affiliation(s)
- Min Deng
- College of Architecture and Environment, Sichuan University, Chengdu 610065, China
- National Engineering Research Centre for Flue Gas Desulfurization, Chengdu 610065, China
- Carbon Neutral Technology Innovation Center of Sichuan, Chengdu 610065, China
- College of Carbon Neutrality Future Technology, Sichuan University, Chengdu 610065, China
| | - Jing Wei
- College of Architecture and Environment, Sichuan University, Chengdu 610065, China
- National Engineering Research Centre for Flue Gas Desulfurization, Chengdu 610065, China
- Carbon Neutral Technology Innovation Center of Sichuan, Chengdu 610065, China
- College of Carbon Neutrality Future Technology, Sichuan University, Chengdu 610065, China
| | - Wentao Du
- Dongfang Boiler Co. Ltd., Zigong 643001, China
| | - Zikang Qin
- College of Architecture and Environment, Sichuan University, Chengdu 610065, China
- National Engineering Research Centre for Flue Gas Desulfurization, Chengdu 610065, China
- Carbon Neutral Technology Innovation Center of Sichuan, Chengdu 610065, China
- College of Carbon Neutrality Future Technology, Sichuan University, Chengdu 610065, China
| | - Zimei Zhang
- National Engineering Research Centre for Flue Gas Desulfurization, Chengdu 610065, China
- Carbon Neutral Technology Innovation Center of Sichuan, Chengdu 610065, China
- College of Carbon Neutrality Future Technology, Sichuan University, Chengdu 610065, China
- College of Ecology and Environment, Chengdu University of Technology, Chengdu 610065, China
| | - Lin Yang
- National Engineering Research Centre for Flue Gas Desulfurization, Chengdu 610065, China
- Carbon Neutral Technology Innovation Center of Sichuan, Chengdu 610065, China
- College of Carbon Neutrality Future Technology, Sichuan University, Chengdu 610065, China
| | - Lu Yao
- National Engineering Research Centre for Flue Gas Desulfurization, Chengdu 610065, China
- Carbon Neutral Technology Innovation Center of Sichuan, Chengdu 610065, China
- College of Carbon Neutrality Future Technology, Sichuan University, Chengdu 610065, China
| | - Wenju Jiang
- National Engineering Research Centre for Flue Gas Desulfurization, Chengdu 610065, China
- Carbon Neutral Technology Innovation Center of Sichuan, Chengdu 610065, China
- College of Carbon Neutrality Future Technology, Sichuan University, Chengdu 610065, China
| | - Bo Tang
- College of Ecology and Environment, Chengdu University of Technology, Chengdu 610065, China
| | - Xiaohua Ma
- State Key Laboratory of Separation Membranes and Membrane Processes, School of Materials Science and Engineering, Tiangong University, Tianjin 300387, PR China
| | - Zhongde Dai
- National Engineering Research Centre for Flue Gas Desulfurization, Chengdu 610065, China
- Carbon Neutral Technology Innovation Center of Sichuan, Chengdu 610065, China
- College of Carbon Neutrality Future Technology, Sichuan University, Chengdu 610065, China
| |
Collapse
|
2
|
Weng Y, Li N, Xu Z, Huang J, Huang L, Wang H, Li J, Wang Y, Ma X. Super high gas separation performance membranes derived from a brominated alternative PIM by thermal induced crosslinking and carbonization at low temperature. Sep Purif Technol 2023. [DOI: 10.1016/j.seppur.2023.123548] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 03/11/2023]
|
3
|
Ye C, Bai L, Weng Y, Xu Z, Huang L, Huang J, Li J, Wang Y, Ma X. Fine tune gas separation property of intrinsic microporous polyimides and their carbon molecular sieve membranes by gradient bromine substitution/removal. J Memb Sci 2022. [DOI: 10.1016/j.memsci.2022.121310] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/29/2022]
|
4
|
Liu X, Liu S, Li Y, Zong X, Luo J, Zhang C, Xue S. Transport properties of
O
2
,
N
2
, and
CO
2
through the
CMS
membranes derived from tris(4‐aminophenyl)amine‐based polyimides. POLYM ADVAN TECHNOL 2022. [DOI: 10.1002/pat.5763] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/07/2022]
Affiliation(s)
- Xiangyun Liu
- School of Materials Science and Engineering Tianjin University of Technology Tianjin China
- Tianjin Key Laboratory of Organic Solar Cells and Photochemical Conversion, School of Chemistry and Chemical Engineering Tianjin University of Technology Tianjin China
| | - Shan Liu
- Tianjin Key Laboratory of Organic Solar Cells and Photochemical Conversion, School of Chemistry and Chemical Engineering Tianjin University of Technology Tianjin China
| | - Ye Li
- Tianjin Key Laboratory of Organic Solar Cells and Photochemical Conversion, School of Chemistry and Chemical Engineering Tianjin University of Technology Tianjin China
| | - Xueping Zong
- Tianjin Key Laboratory of Organic Solar Cells and Photochemical Conversion, School of Chemistry and Chemical Engineering Tianjin University of Technology Tianjin China
| | - Jiangzhou Luo
- Tianjin Key Laboratory of Organic Solar Cells and Photochemical Conversion, School of Chemistry and Chemical Engineering Tianjin University of Technology Tianjin China
| | - Chunxue Zhang
- Tianjin Key Laboratory of Organic Solar Cells and Photochemical Conversion, School of Chemistry and Chemical Engineering Tianjin University of Technology Tianjin China
| | - Song Xue
- Tianjin Key Laboratory of Organic Solar Cells and Photochemical Conversion, School of Chemistry and Chemical Engineering Tianjin University of Technology Tianjin China
| |
Collapse
|
5
|
Sheng L, Ren J, Zhao D, Li H, Hua K, Deng M. The evolution of the structure, mechanical, and gas separation properties of P84 hollow fiber membranes from the polymer to the carbon stage. Sep Purif Technol 2021. [DOI: 10.1016/j.seppur.2020.117741] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/28/2022]
|
6
|
Kamath MG, Itta AK, Hays SS, Sanyal O, Liu Z, Koros WJ. Pyrolysis End-Doping to Optimize Transport Properties of Carbon Molecular Sieve Hollow Fiber Membranes. Ind Eng Chem Res 2020. [DOI: 10.1021/acs.iecr.0c02479] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/28/2022]
Affiliation(s)
- Manjeshwar G. Kamath
- School of Chemical and Biomolecular Engineering, Georgia Institute of Technology, Atlanta, Georgia 30332, United States
| | - Arun K. Itta
- School of Chemical and Biomolecular Engineering, Georgia Institute of Technology, Atlanta, Georgia 30332, United States
| | - Samuel S. Hays
- School of Chemical and Biomolecular Engineering, Georgia Institute of Technology, Atlanta, Georgia 30332, United States
| | - Oishi Sanyal
- School of Chemical and Biomolecular Engineering, Georgia Institute of Technology, Atlanta, Georgia 30332, United States
| | - Zhongyun Liu
- School of Chemical and Biomolecular Engineering, Georgia Institute of Technology, Atlanta, Georgia 30332, United States
| | - William J. Koros
- School of Chemical and Biomolecular Engineering, Georgia Institute of Technology, Atlanta, Georgia 30332, United States
| |
Collapse
|
7
|
Kim SJ, Son YJ, Jeon B, Han YS, Kim YJ, Jung KH. Surface crosslinking of 6FDA-durene nanofibers for porous carbon nanofiber electrodes in electrochemical double layer capacitors. NANOTECHNOLOGY 2020; 31:215404. [PMID: 32032014 DOI: 10.1088/1361-6528/ab73bb] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/10/2023]
Abstract
Tailoring the chemical structures of a precursor polymer for carbon nanofibers (CNFs) produced by thermal treatment of electrospun nanofibers was studied to prepare the electrodes for electrochemical double layer capacitors (EDLCs). To improve energy storage performance of CNF electrodes, 6FDA-durene nanofibers were crosslinked by a vapor crosslinking method, and subsequently carbonized. Chemical modification via crosslinking was confirmed by FTIR spectra while the conversion of crosslinked 6FDA-durene into carbon was done by Raman spectroscopy. Electrochemical performance of these CNF electrodes was evaluated by assembling coin cells, and the CNFs derived from crosslinked 6FDA-durene nanofibers showed higher specific capacitances, energy densities and cycling stability than those from non-crosslinked ones. It was also shown that CNFs prepared using 1 min crosslinking exhibit the highest energy storage performances, a specific capacitance of 301 F g-1 (at 10 mV s-1), and the maximum energy density of 11.1 Wh kg-1 (at 0.5 A g-1) and power density of 1.8 kW kg-1 (at 6 A g-1). Surface area and porosity of CNFs, which is critical for the performance of EDLC electrodes, were studied by nitrogen adsorption/desorption measurements, and it was clearly seen that surface crosslinking of precursor polymers improved surface properties of the resultant CNFs.
Collapse
Affiliation(s)
- So Jeong Kim
- School of Advanced Materials and Chemical Engineering, Daegu Catholic University, Gyeongsan-si, Gyeongbuk, Republic of Korea
| | | | | | | | | | | |
Collapse
|
8
|
Xu B, Zhao X, Chen H, Su S, Yu H. Effects of Carbonization Conditions on Structure and Gas Adsorption of Carbon Membranes Derived from Polyvinyl Chloride. ChemistrySelect 2020. [DOI: 10.1002/slct.201903637] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/11/2022]
Affiliation(s)
- Beiyu Xu
- College of Chemistry and Chemical EngineeringHunan Normal University Changsha 410081 P. R.China
- Ningbo Institute of Materials Technology and EngineeringChinese Academy of Science Ningbo 315201 P. R. China
| | - Xinpeng Zhao
- College of Chemistry and Chemical EngineeringHunan Normal University Changsha 410081 P. R.China
- Ningbo Institute of Materials Technology and EngineeringChinese Academy of Science Ningbo 315201 P. R. China
| | - Hao Chen
- Ningbo Institute of Materials Technology and EngineeringChinese Academy of Science Ningbo 315201 P. R. China
| | - Shengpei Su
- College of Chemistry and Chemical EngineeringHunan Normal University Changsha 410081 P. R.China
| | - Haibin Yu
- College of Chemistry and Chemical EngineeringHunan Normal University Changsha 410081 P. R.China
- Ningbo Institute of Materials Technology and EngineeringChinese Academy of Science Ningbo 315201 P. R. China
| |
Collapse
|
9
|
Omidvar M, Nguyen H, Doherty CM, Hill AJ, Stafford CM, Feng X, Swihart MT, Lin H. Unexpectedly Strong Size-Sieving Ability in Carbonized Polybenzimidazole for Membrane H 2/CO 2 Separation. ACS APPLIED MATERIALS & INTERFACES 2019; 11:47365-47372. [PMID: 31750641 DOI: 10.1021/acsami.9b16966] [Citation(s) in RCA: 21] [Impact Index Per Article: 4.2] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/10/2023]
Abstract
Polymers with high permeability and strong size-sieving ability are needed for H2/CO2 separation at temperatures ranging from 100 to 300 °C to enable an energy-efficient precombustion CO2 capture process. However, such polymers usually suffer from a permeability/selectivity tradeoff, that is, polymers with high permeability tend to exhibit a weak size-sieving ability and thus low selectivity. Herein, we demonstrate that carbonization of a suitable polymer precursor (i.e., polybenzimidazole or PBI) generates microcavities (leading to high H2 permeability) and ultramicroporous channels (leading to strong size-sieving ability and thus high H2/CO2 selectivity). Specifically, carbonization of PBI at 900 °C (CMS@900) doubles H2 permeability and increases H2/CO2 selectivity from 14 to 80 at 150 °C. When tested with simulated syngas-containing equimolar H2 and CO2 in the presence of water vapor for 120 h, CMS@900 exhibits stable H2 permeability of ≈36 barrer and H2/CO2 selectivity of ≈53 at 150 °C, above Robeson's 2008 upper bound and demonstrating robustness against physical aging and CO2 plasticization.
Collapse
Affiliation(s)
- Maryam Omidvar
- Department of Chemical and Biological Engineering, University at Buffalo , The State University of New York , Buffalo , New York 14260 , United States
| | - Hien Nguyen
- Department of Chemical and Biological Engineering, University at Buffalo , The State University of New York , Buffalo , New York 14260 , United States
| | - Cara M Doherty
- Commonwealth Scientific and Industrial Research Organization (CSIRO) Future Industries , Private Bag 10 , Clayton , South Victoria 3169 , Australia
| | - Anita J Hill
- Commonwealth Scientific and Industrial Research Organization (CSIRO) Future Industries , Private Bag 10 , Clayton , South Victoria 3169 , Australia
| | - Christopher M Stafford
- Materials Science & Engineering Division , National Institute of Standards and Technology , MS 8542, 100 Bureau Drive , Gaithersburg , Maryland 20899 , United States
| | - Xianshe Feng
- Department of Chemical Engineering , University of Waterloo , Waterloo , Ontario N2L 3G1 , Canada
| | - Mark T Swihart
- Department of Chemical and Biological Engineering, University at Buffalo , The State University of New York , Buffalo , New York 14260 , United States
| | - Haiqing Lin
- Department of Chemical and Biological Engineering, University at Buffalo , The State University of New York , Buffalo , New York 14260 , United States
| |
Collapse
|
10
|
Idarraga-Mora JA, Lemelin MA, Weinman ST, Husson SM. Effect of Short-Term Contact with C1-C4 Monohydric Alcohols on the Water Permeance of MPD-TMC Thin-Film Composite Reverse Osmosis Membranes. MEMBRANES 2019; 9:E92. [PMID: 31357425 PMCID: PMC6723597 DOI: 10.3390/membranes9080092] [Citation(s) in RCA: 6] [Impact Index Per Article: 1.2] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 06/18/2019] [Revised: 07/15/2019] [Accepted: 07/24/2019] [Indexed: 11/22/2022]
Abstract
In this paper, we discuss the effect of alcohol contact on the transport properties of thin-film composite reverse osmosis membranes. Five commercial membranes were studied to quantify the changes in water permeance and sodium chloride rejection from contact with five C1-C4 monohydric, linear alcohols. Water permeance generally increased without decreasing rejection after short-term contact. The extent of these changes depends on the membrane and alcohol used. Young's modulus measurements showed decreased stiffness of the active layer after contacting the membranes with alcohol, suggesting plasticization. Data analysis using a dual-mode sorption model identified positive correlations of the initial water permeance, as well as the change in free energy of mixing between water and the alcohols, with the increase in water permeance after alcohol contact. We suggest that the mixing of water with the alcohols facilitates alcohol penetration into the active layer, likely by disrupting inter-chain hydrogen bonds, thus increasing the free volume for water permeation. Our studies provide a modeling framework to estimate the changes in transport properties after short-term contact with C1-C4 alcohols.
Collapse
Affiliation(s)
- Jaime A Idarraga-Mora
- Department of Chemical and Biomolecular Engineering, Clemson University, 127 Earle Hall, Clemson, SC 29634, USA
| | - Michael A Lemelin
- Department of Chemical and Biomolecular Engineering, Clemson University, 127 Earle Hall, Clemson, SC 29634, USA
| | - Steven T Weinman
- Department of Chemical and Biological Engineering, The University of Alabama, Box 870203, Tuscaloosa, AL 35487, USA
| | - Scott M Husson
- Department of Chemical and Biomolecular Engineering, Clemson University, 127 Earle Hall, Clemson, SC 29634, USA.
| |
Collapse
|
11
|
Pilot⁻Scale Production of Carbon Hollow Fiber Membranes from Regenerated Cellulose Precursor-Part II: Carbonization Procedure. MEMBRANES 2018; 8:membranes8040097. [PMID: 30326624 PMCID: PMC6315789 DOI: 10.3390/membranes8040097] [Citation(s) in RCA: 6] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 09/17/2018] [Revised: 10/09/2018] [Accepted: 10/12/2018] [Indexed: 11/17/2022]
Abstract
The simultaneous carbonization of thousands of fibers in a horizontal furnace may result in fused fibers if carbonization residuals (tars) are not removed fast enough. The optimized purge gas flow rate and a small degree angle in the furnace position may enhance the yield of high quality carbon fibers up to 97% by removing by-products. The production process for several thousand carbon fibers in a single batch is reported. The aim was developing a pilot-scale system to produce carbon membranes. Cellulose-acetate fibers were transformed into regenerated cellulose through a de-acetylation process and the fibers were carbonized in a horizontally oriented three-zone furnace. Quartz tubes and perforated stainless steel grids were used to carbonize up to 4000 (160 cm long) fibers in a single batch. The number of fused fibers could be significantly reduced by replacing the quartz tubes with perforated grids. It was further found that improved purge gas flow distribution in the furnace positioned at a 4-degree to 6-degree angle permitted residuals to flow downward into the tar collection chamber. In total, 390 spun-batches of fibers were carbonized. Each grid contained 2000–4000 individual fibers and these fibers comprised four to six spun-batches of vertically dried fibers. Gas permeation properties were investigated for the carbon fibers.
Collapse
|
12
|
Jung KH, Panapitiya N, Ferraris JP. Electrochemical energy storage performance of carbon nanofiber electrodes derived from 6FDA-durene. NANOTECHNOLOGY 2018; 29:275701. [PMID: 29629876 DOI: 10.1088/1361-6528/aabc9c] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/08/2023]
Abstract
Carbon nanofibers (CNFs) are promising electrode materials for electrochemical double layer capacitors due to their high porosity and electrical conductivity. CNFs were prepared by electrospinning and subsequent thermal treatment of a new precursor polymer, 6FDA-durene, without the addition of pore generating agents. The conversion of precursor nanofibers into CNFs was confirmed using Raman spectroscopy. CNFs were activated and annealed, and nitrogen adsorption/desorption measurements were conducted to determine surface area and porosity. These activated/annealed CNFs were used as binderless electrodes in coin cells with an ionic liquid electrolyte. The devices displayed a specific capacitance of 128 F g-1, an energy density of 63.4 Wh kg-1 (at 1 A g-1), and a power density of 11.0 KW kg-1 (at 7 A g-1).
Collapse
Affiliation(s)
- Kyung-Hye Jung
- Department of Advanced Materials and Chemical Engineering, Daegu Catholic University, Gyeongsan, Republic of Korea
| | | | | |
Collapse
|
13
|
Partially pyrolized gas-separation membranes made from blends of copolyetherimides and polyimides. Eur Polym J 2018. [DOI: 10.1016/j.eurpolymj.2018.04.031] [Citation(s) in RCA: 7] [Impact Index Per Article: 1.2] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/20/2022]
|
14
|
Kamath MG, Fu S, Itta AK, Qiu W, Liu G, Swaidan R, Koros WJ. 6FDA-DETDA: DABE polyimide-derived carbon molecular sieve hollow fiber membranes: Circumventing unusual aging phenomena. J Memb Sci 2018. [DOI: 10.1016/j.memsci.2017.10.020] [Citation(s) in RCA: 35] [Impact Index Per Article: 5.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/30/2022]
|
15
|
Fu S, Sanders ES, Kulkarni S, Chu YH, Wenz GB, Koros WJ. The significance of entropic selectivity in carbon molecular sieve membranes derived from 6FDA/DETDA:DABA(3:2) polyimide. J Memb Sci 2017. [DOI: 10.1016/j.memsci.2017.06.007] [Citation(s) in RCA: 17] [Impact Index Per Article: 2.4] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/19/2022]
|
16
|
|
17
|
Han G, Zhang S, Li X, Chung TS. Progress in pressure retarded osmosis (PRO) membranes for osmotic power generation. Prog Polym Sci 2015. [DOI: 10.1016/j.progpolymsci.2015.04.005] [Citation(s) in RCA: 116] [Impact Index Per Article: 12.9] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/23/2022]
|
18
|
Ma X, Lin YS, Wei X, Kniep J. Ultrathin carbon molecular sieve membrane for propylene/propane separation. AIChE J 2015. [DOI: 10.1002/aic.15005] [Citation(s) in RCA: 67] [Impact Index Per Article: 7.4] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/06/2022]
Affiliation(s)
- Xiaoli Ma
- School for Engineering of Matter, Transport and Energy; Arizona State University; Tempe AZ 85287
| | - Y. S. Lin
- School for Engineering of Matter, Transport and Energy; Arizona State University; Tempe AZ 85287
| | - Xiaotong Wei
- Membrane Technology and Research, Inc.; Newark CA 94560
| | - Jay Kniep
- Membrane Technology and Research, Inc.; Newark CA 94560
| |
Collapse
|
19
|
Fu S, Sanders ES, Kulkarni SS, Koros WJ. Carbon molecular sieve membrane structure–property relationships for four novel 6FDA based polyimide precursors. J Memb Sci 2015. [DOI: 10.1016/j.memsci.2015.03.079] [Citation(s) in RCA: 94] [Impact Index Per Article: 10.4] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/16/2022]
|
20
|
Li H, Haas-Santo K, Schygulla U, Dittmeyer R. Inorganic microporous membranes for H2 and CO2 separation—Review of experimental and modeling progress. Chem Eng Sci 2015. [DOI: 10.1016/j.ces.2015.01.022] [Citation(s) in RCA: 57] [Impact Index Per Article: 6.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/24/2022]
|
21
|
Favvas EP, Heliopoulos NS, Papageorgiou SK, Mitropoulos AC, Kapantaidakis GC, Kanellopoulos NK. Helium and hydrogen selective carbon hollow fiber membranes: The effect of pyrolysis isothermal time. Sep Purif Technol 2015. [DOI: 10.1016/j.seppur.2014.12.048] [Citation(s) in RCA: 35] [Impact Index Per Article: 3.9] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/24/2022]
|
22
|
Zhang B, Li L, Wang C, Pang J, Zhang S, Jian X, Wang T. Effect of membrane-casting parameters on the microstructure and gas permeation of carbon membranes. RSC Adv 2015. [DOI: 10.1039/c5ra10473d] [Citation(s) in RCA: 16] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022] Open
Abstract
A study on the controlled fabrication of carbon membranes by varying membrane-casting parameters, including solvent, drying method and pyrolysis temperature.
Collapse
Affiliation(s)
- Bing Zhang
- Carbon Research Laboratory
- State Key Lab of Fine Chemicals
- School of Chemical Engineering
- Dalian University of Technology
- Dalian 116024
| | - Lin Li
- Carbon Research Laboratory
- State Key Lab of Fine Chemicals
- School of Chemical Engineering
- Dalian University of Technology
- Dalian 116024
| | - Chunlei Wang
- Carbon Research Laboratory
- State Key Lab of Fine Chemicals
- School of Chemical Engineering
- Dalian University of Technology
- Dalian 116024
| | - Jing Pang
- Carbon Research Laboratory
- State Key Lab of Fine Chemicals
- School of Chemical Engineering
- Dalian University of Technology
- Dalian 116024
| | - Shouhai Zhang
- Carbon Research Laboratory
- State Key Lab of Fine Chemicals
- School of Chemical Engineering
- Dalian University of Technology
- Dalian 116024
| | - Xigao Jian
- Carbon Research Laboratory
- State Key Lab of Fine Chemicals
- School of Chemical Engineering
- Dalian University of Technology
- Dalian 116024
| | - Tonghua Wang
- Carbon Research Laboratory
- State Key Lab of Fine Chemicals
- School of Chemical Engineering
- Dalian University of Technology
- Dalian 116024
| |
Collapse
|
23
|
Cheng LH, Fu YJ, Liao KS, Chen JT, Hu CC, Hung WS, Lee KR, Lai JY. A high-permeance supported carbon molecular sieve membrane fabricated by plasma-enhanced chemical vapor deposition followed by carbonization for CO2 capture. J Memb Sci 2014. [DOI: 10.1016/j.memsci.2014.02.033] [Citation(s) in RCA: 20] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/25/2022]
|
24
|
Fabrication and modification of cellulose acetate based mixed matrix membrane: Gas separation and physical properties. J IND ENG CHEM 2014. [DOI: 10.1016/j.jiec.2013.06.042] [Citation(s) in RCA: 58] [Impact Index Per Article: 5.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/23/2022]
|
25
|
Zhang B, Shi Y, Wu Y, Wang T, Qiu J. Preparation and characterization of supported ordered nanoporous carbon membranes for gas separation. J Appl Polym Sci 2013. [DOI: 10.1002/app.39925] [Citation(s) in RCA: 12] [Impact Index Per Article: 1.1] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/09/2022]
Affiliation(s)
- Bing Zhang
- School of Petrochemical Engineering; Shenyang University of Technology; Liaoyang 111003 China
- School of Chemical Egineering, Carbon Research Laboratory, State Key Laboratory of Fine Chemicals; Dalian University of Technology; Dalian 116024 China
| | - Yi Shi
- School of Petrochemical Engineering; Shenyang University of Technology; Liaoyang 111003 China
| | - Yonghong Wu
- School of Petrochemical Engineering; Shenyang University of Technology; Liaoyang 111003 China
| | - Tonghua Wang
- School of Chemical Egineering, Carbon Research Laboratory, State Key Laboratory of Fine Chemicals; Dalian University of Technology; Dalian 116024 China
| | - Jieshan Qiu
- School of Chemical Egineering, Carbon Research Laboratory, State Key Laboratory of Fine Chemicals; Dalian University of Technology; Dalian 116024 China
| |
Collapse
|
26
|
Deformation and reinforcement of thin-film composite (TFC) polyamide-imide (PAI) membranes for osmotic power generation. J Memb Sci 2013. [DOI: 10.1016/j.memsci.2013.01.049] [Citation(s) in RCA: 116] [Impact Index Per Article: 10.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/19/2022]
|
27
|
Pirouzfar V, Hosseini SS, Omidkhah MR, Moghaddam AZ. Modeling and optimization of gas transport characteristics of carbon molecular sieve membranes through statistical analysis. POLYM ENG SCI 2013. [DOI: 10.1002/pen.23553] [Citation(s) in RCA: 24] [Impact Index Per Article: 2.2] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/07/2022]
Affiliation(s)
- Vahid Pirouzfar
- Department of Chemical Engineering; Tarbiat Modares University; Tehran Iran
| | | | | | | |
Collapse
|
28
|
Surface modification of polyimide membranes by diethylenetriamine (DETA) vapor for H2 purification and moisture effect on gas permeation. J Memb Sci 2013. [DOI: 10.1016/j.memsci.2012.12.008] [Citation(s) in RCA: 50] [Impact Index Per Article: 4.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/20/2022]
|
29
|
Zhang S, Fu F, Chung TS. Substrate modifications and alcohol treatment on thin film composite membranes for osmotic power. Chem Eng Sci 2013. [DOI: 10.1016/j.ces.2012.09.014] [Citation(s) in RCA: 90] [Impact Index Per Article: 8.2] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/27/2022]
|
30
|
Suzuki T, Yamada Y. Effect of thermal treatment on gas transport properties of hyperbranched polyimide–silica hybrid membranes. J Memb Sci 2012. [DOI: 10.1016/j.memsci.2012.06.035] [Citation(s) in RCA: 16] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/28/2022]
|
31
|
Briceño K, Montané D, Garcia-Valls R, Iulianelli A, Basile A. Fabrication variables affecting the structure and properties of supported carbon molecular sieve membranes for hydrogen separation. J Memb Sci 2012. [DOI: 10.1016/j.memsci.2012.05.015] [Citation(s) in RCA: 54] [Impact Index Per Article: 4.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/28/2022]
|
32
|
|
33
|
Liaw DJ, Wang KL, Huang YC, Lee KR, Lai JY, Ha CS. Advanced polyimide materials: Syntheses, physical properties and applications. Prog Polym Sci 2012. [DOI: 10.1016/j.progpolymsci.2012.02.005] [Citation(s) in RCA: 1048] [Impact Index Per Article: 87.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/28/2022]
|
34
|
Liu BS, Guo YH, Yuan F. Novel Modification of a Macroporous Stainless Steel Tube by Electroless Ni plating for Use as a Substrate for Preparation of Nanoporous Carbon Membranes. Ind Eng Chem Res 2012. [DOI: 10.1021/ie202953n] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/28/2022]
Affiliation(s)
- B. S. Liu
- Department of Chemistry, School of Science, Tianjin University, Tianjin 30072, P.R. China
| | - Y. H. Guo
- Department of Chemistry, School of Science, Tianjin University, Tianjin 30072, P.R. China
| | - F. Yuan
- Department of Chemistry, School of Science, Tianjin University, Tianjin 30072, P.R. China
| |
Collapse
|
35
|
|
36
|
Li FY, Xiao Y, Chung TS, Kawi S. High-Performance Thermally Self-Cross-Linked Polymer of Intrinsic Microporosity (PIM-1) Membranes for Energy Development. Macromolecules 2012. [DOI: 10.1021/ma202667y] [Citation(s) in RCA: 196] [Impact Index Per Article: 16.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/28/2022]
Affiliation(s)
- Fu Yun Li
- Department of Chemical & Biomolecular Engineering, National University of Singapore, 4 Engineering Drive 4, 117576 Singapore
| | - Youchang Xiao
- Suzhou Faith & Hope Membrane Technology Co., Ltd., Suzhou Industrial Park, Jiangsu Province, 215123, PR China
| | - Tai-Shung Chung
- Department of Chemical & Biomolecular Engineering, National University of Singapore, 4 Engineering Drive 4, 117576 Singapore
| | - Sibudjing Kawi
- Department of Chemical & Biomolecular Engineering, National University of Singapore, 4 Engineering Drive 4, 117576 Singapore
| |
Collapse
|
37
|
Buonomenna M, Yave W, Golemme G. Some approaches for high performance polymer based membranes for gas separation: block copolymers, carbon molecular sieves and mixed matrix membranes. RSC Adv 2012. [DOI: 10.1039/c2ra20748f] [Citation(s) in RCA: 142] [Impact Index Per Article: 11.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/22/2022] Open
|
38
|
Salleh WNW, Ismail AF. Fabrication and characterization of PEI/PVP-based carbon hollow fiber membranes for CO2/CH4 and CO2/N2 separation. AIChE J 2011. [DOI: 10.1002/aic.13711] [Citation(s) in RCA: 33] [Impact Index Per Article: 2.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/11/2022]
|
39
|
Liao KS, Chen H, Awad S, Yuan JP, Hung WS, Lee KR, Lai JY, Hu CC, Jean YC. Determination of Free-Volume Properties in Polymers Without Orthopositronium Components in Positron Annihilation Lifetime Spectroscopy. Macromolecules 2011. [DOI: 10.1021/ma201324k] [Citation(s) in RCA: 85] [Impact Index Per Article: 6.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/24/2023]
Affiliation(s)
| | - Hongmin Chen
- Department of Chemistry, University of Missouri-Kansas City, Kansas City, Missouri 64110, United States
| | - Somia Awad
- Department of Chemistry, University of Missouri-Kansas City, Kansas City, Missouri 64110, United States
| | - Jen-Pwu Yuan
- Department of Chemistry, University of Missouri-Kansas City, Kansas City, Missouri 64110, United States
| | | | | | | | - Chien-Chieh Hu
- Department of Chemical Engineering and Materials, Nanya Institute of Technology, Chung-Li, Taiwan 32034
| | - Y. C. Jean
- Department of Chemistry, University of Missouri-Kansas City, Kansas City, Missouri 64110, United States
| |
Collapse
|
40
|
Salleh W, Ismail A. Carbon hollow fiber membranes derived from PEI/PVP for gas separation. Sep Purif Technol 2011. [DOI: 10.1016/j.seppur.2011.06.009] [Citation(s) in RCA: 37] [Impact Index Per Article: 2.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/18/2022]
|
41
|
Li G, Yang J, Wang J, Xiao W, Zhou L, Zhang Y, Lu J, Yin D. Thin carbon/SAPO-34 microporous composite membranes for gas separation. J Memb Sci 2011. [DOI: 10.1016/j.memsci.2011.03.022] [Citation(s) in RCA: 24] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/18/2022]
|
42
|
|
43
|
Bernardo P, Drioli E, Golemme G. Membrane Gas Separation: A Review/State of the Art. Ind Eng Chem Res 2009. [DOI: 10.1021/ie8019032] [Citation(s) in RCA: 1532] [Impact Index Per Article: 102.1] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/29/2022]
Affiliation(s)
- P. Bernardo
- National Research Council−Institute for Membrane Technology (ITM−CNR), Via Pietro Bucci, c/o University of Calabria, cubo 17/C, 87030 Rende, Italy, and University of Calabria, Department of Chemical Engineering and Materials and INSTM Consortium, cubo 45/A, Via Pietro Bucci, 87036 Rende, Italy
| | - E. Drioli
- National Research Council−Institute for Membrane Technology (ITM−CNR), Via Pietro Bucci, c/o University of Calabria, cubo 17/C, 87030 Rende, Italy, and University of Calabria, Department of Chemical Engineering and Materials and INSTM Consortium, cubo 45/A, Via Pietro Bucci, 87036 Rende, Italy
| | - G. Golemme
- National Research Council−Institute for Membrane Technology (ITM−CNR), Via Pietro Bucci, c/o University of Calabria, cubo 17/C, 87030 Rende, Italy, and University of Calabria, Department of Chemical Engineering and Materials and INSTM Consortium, cubo 45/A, Via Pietro Bucci, 87036 Rende, Italy
| |
Collapse
|
44
|
Ebner AD, Ritter JA. State-of-the-art Adsorption and Membrane Separation Processes for Carbon Dioxide Production from Carbon Dioxide Emitting Industries. SEP SCI TECHNOL 2009. [DOI: 10.1080/01496390902733314] [Citation(s) in RCA: 184] [Impact Index Per Article: 12.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Submit a Manuscript] [Subscribe] [Scholar Register] [Indexed: 10/20/2022]
|
45
|
Vogiatzis KD, Mavrandonakis A, Klopper W, Froudakis GE. Ab initio Study of the Interactions between CO2and N-Containing Organic Heterocycles. Chemphyschem 2009; 10:374-83. [DOI: 10.1002/cphc.200800583] [Citation(s) in RCA: 164] [Impact Index Per Article: 10.9] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/06/2022]
|
46
|
Hosseini SS, Chung TS. Carbon membranes from blends of PBI and polyimides for N2/CH4 and CO2/CH4 separation and hydrogen purification. J Memb Sci 2009. [DOI: 10.1016/j.memsci.2008.12.005] [Citation(s) in RCA: 135] [Impact Index Per Article: 9.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/21/2022]
|
47
|
Jiang LY, Chen H, Jean YC, Chung TS. Ultrathin polymeric interpenetration network with separation performance approaching ceramic membranes for biofuel. AIChE J 2009. [DOI: 10.1002/aic.11652] [Citation(s) in RCA: 45] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/09/2022]
|
48
|
Anderson CJ, Pas SJ, Arora G, Kentish SE, Hill AJ, Sandler SI, Stevens GW. Effect of pyrolysis temperature and operating temperature on the performance of nanoporous carbon membranes. J Memb Sci 2008. [DOI: 10.1016/j.memsci.2008.04.064] [Citation(s) in RCA: 59] [Impact Index Per Article: 3.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/22/2022]
|
49
|
Liu S, Wang T, Liu Q, Zhang S, Zhao Z, Liang C. Gas Permeation Properties of Carbon Molecular Sieve Membranes Derived from Novel Poly(phthalazinone ether sulfone ketone). Ind Eng Chem Res 2008. [DOI: 10.1021/ie070734l] [Citation(s) in RCA: 15] [Impact Index Per Article: 0.9] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/28/2022]
Affiliation(s)
- Shili Liu
- State Key Laboratory of Fine Chemicals, Carbon Research Laboratory, School of Chemical Engineering, and Department of Polymer Science and Materials, Dalian University of Technology, 158 Zhongshan Road, Dalian, 116012, China
| | - Tonghua Wang
- State Key Laboratory of Fine Chemicals, Carbon Research Laboratory, School of Chemical Engineering, and Department of Polymer Science and Materials, Dalian University of Technology, 158 Zhongshan Road, Dalian, 116012, China
| | - Qingling Liu
- State Key Laboratory of Fine Chemicals, Carbon Research Laboratory, School of Chemical Engineering, and Department of Polymer Science and Materials, Dalian University of Technology, 158 Zhongshan Road, Dalian, 116012, China
| | - Shouhai Zhang
- State Key Laboratory of Fine Chemicals, Carbon Research Laboratory, School of Chemical Engineering, and Department of Polymer Science and Materials, Dalian University of Technology, 158 Zhongshan Road, Dalian, 116012, China
| | - Zongchang Zhao
- State Key Laboratory of Fine Chemicals, Carbon Research Laboratory, School of Chemical Engineering, and Department of Polymer Science and Materials, Dalian University of Technology, 158 Zhongshan Road, Dalian, 116012, China
| | - Changhai Liang
- State Key Laboratory of Fine Chemicals, Carbon Research Laboratory, School of Chemical Engineering, and Department of Polymer Science and Materials, Dalian University of Technology, 158 Zhongshan Road, Dalian, 116012, China
| |
Collapse
|
50
|
Xiao Y, Chung TS, Chng ML, Tamai S, Yamaguchi A. Structure and properties relationships for aromatic polyimides and their derived carbon membranes: experimental and simulation approaches. J Phys Chem B 2007; 109:18741-8. [PMID: 16853411 DOI: 10.1021/jp050177l] [Citation(s) in RCA: 64] [Impact Index Per Article: 3.8] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/29/2022]
Abstract
The main objective of this study is to investigate the factors of the chemical structure and physical properties of rigid polyimides in determining the performance of derived carbon membranes through both the experimental and simulation methods. Four polyimides made of different dianhydrides were pyrolyzed at 550 and 800 degrees C under vacuum conditions. The resultant carbon membranes exhibit excellent gas separation performances beyond the traditional upper limit line for polymer membranes. The thermal stability and the fractional free volume (FFV) of polyimides were examined by a thermogravimetric analyzer and a density meter. The chain properties of polyimide, such as flatness, chain linearity, and mobility, were simulated using the Cerius(2) software. All above characterizations of polyimides were related to the microstructure and gas transport properties of the resultant carbon membranes. It was observed that the high FFV values and low thermal stability of polyimide produce carbon membranes with bigger pore and higher gas permeability at low pyrolysis temperatures. Therefore, polyimides with big thermally labile side groups should be preferred to prepare carbon membranes at low pyrolysis temperatures for high permeability applications. On the other side, since the flatness and in-plane orientation of precursors may lead carbon membranes to ordered structure, thus obtaining high gas selectivity, linear polyimides with more coplanar aromatic rings should be first choice to prepare carbon membranes at high pyrolysis temperatures for high selectivity applications. The location of the indan group also affects chain flatness and in-plane orientation. As a result, carbon membranes derived from the BTDA-DAI precursor have superior separation performance to those derived from Matrimid.
Collapse
Affiliation(s)
- Youchang Xiao
- Department of Chemical & Biomolecular Engineering, National University of Singapore, Singapore 117602
| | | | | | | | | |
Collapse
|