Hydroxide Ligands Cooperate with Catalytic Centers in Metal–Organic Frameworks for Efficient Photocatalytic CO2 Reduction

Photothermal Synergistic Effect Induces Bimetallic Cooperation to Modulate Product Selectivity of CO2 Reduction on Different CeO2 Crystal Facets

Product selectivity of solar-driven CO2 reduction and H2O oxidation reactions has been successfully controlled by tuning the spatial distance between Pt/Au bimetallic active sites on different crystal facets of CeO2 catalysts. The replacement depth of Ce atoms by monatomic Pt determines the distance between bimetallic sites, while Au clusters are deposited on the surface. This space configuration creates a favourable microenvironment for the migration of active hydrogen species (*H). The *H is generated via the activation of H2O on monatomic Pt sites and migrate towards Au clusters with a strong capacity for CO2 adsorption. Under concentrated solar irradiation, selectivity of the (100) facet towards CO is 100 %, and the selectivity of the (110) and (111) facets towards CH4 is 33.5 % and 97.6 %, respectively. Notably, the CH4 yield on the (111) facet is as high as 369.4 μmol/g/h, and the solar-to-chemical energy efficiency of 0.23 % is 33.8 times higher than that under non-concentrated solar irradiation. The impacts of high-density flux photon and thermal effects on carriers and *H migration at the microscale are comprehensively discussed. This study provides a new avenue for tuning the spatial distance between active sites to achieve optimal product selectivity.

β-Ketoenamine Porous Organic Polymers for High-Efficiency Carbon Dioxide Adsorption and Separation

To mitigate the greenhouse effect, a number of porous organic polymers (POPs) has been developed for carbon capture. Considering the permanent quadrupole of symmetrical CO2 molecules, the integration of electron-rich groups into POPs is a feasible way to enhance the dipole-quadrupole interactions between host and guest. To comprehensively explore the effect of pore environment, including specific surface area, pore size, and number of heteroatoms, on carbon dioxide adsorption capacity, we synthesized a series of microporous POPs with different content of β-ketoenamine structures via Schiff-base condensation reactions. These materials exhibit high BET specific surface areas, high stability, and excellent CO2 adsorption capacity. It is worth mentioning that the CO2 adsorption capacity and CO2/N2 selectivity of TAPPy-TFP reaches 3.87 mmol g-1 and 27. This work demonstrates that the introduction of β-ketoenamine sites directly through condensation reaction is an effective strategy to improve the carbon dioxide adsorption performance of carbon dioxide.

Point-of-care testing of Pseudomonas aeruginosa using PCN-222(Pt) prepared by nanoconfinement-guided protocol to catalyze gas generation reaction

BACKGROUND

Pathogenic bacteria are keeping threatening global public health since they can cause many infectious diseases. The traditional microorganism identification and molecular diagnostic techniques are insufficiently sensitive, time-consuming, or expensive. Thus it is of great interest to establish pressure signal-based sensing platforms for point-of-care testing of pathogenic bacteria to achieve timely diagnosis of infectious diseases. Rational design and synthesis of nano-sized probes with high peroxidase-mimicking activity have been a long-term cherished goal for improving the sensitivity of pressure signal-based sensing methods.

RESULTS

Guided by nanoconfinement effect, PCN-222(Pt) was prepared by confining Pt clusters within the channels of a zirconium porphyrin MOFs material termed as PCN-222. In comparison to regular platinum nanoparticles, palladium@platinum core-shell nanodendrites, and platinum-coated gold nanoparticles, the prepared PCN-222(Pt) displayed superior peroxidase-mimicking activity with outstanding efficiency for catalyzing the decay of H2O2 to produce O2. Thus it was used as a pressure signal probe to establish a sensitive method on a hydrogel pellets platform for analyzing Pseudomonas aeruginosa (P. aeruginosa), for which polymyxin B and a phage termed as JZ1 were used as recognition agents for the target pathogen. P. aeruginosa was quantified with a handheld pressure meter within a broad range of 2.2 × 102-2.2 × 107 cfu mL-1. This method was used to quantify P. aeruginosa in various biological and food samples with acceptable accuracy and reliability.

SIGNIFICANCE

The proposed nanoconfinement-guided protocol provides a novel approach for rational design and preparation of nano-sized probes with high peroxidase-mimicking activity for catalyzing gas-generation reaction. Thus this study opens an avenue for establishment of sensitive pressure signal-based sensing methods for pathogenic bacteria, which shows broad application prospects in medical diagnosis of infectious diseases.

Room-Temperature Synthesis of Covalently Bridged MOP@TpPa-CH3 Composite Photocatalysts for Artificial Photosynthesis

The conversion of CO2 into useful chemicals via photocatalysts is a promising strategy for resolving the environmental problems caused by the addition of CO2. Herein, a series of composite photocatalysts MOP@TpPa-CH3 based on MOP-NH2 and TpPa-CH3 through covalent bridging have been prepared via a facile room-temperature evaporation method and employed for photocatalytic CO2 reduction. The photocatalytic performances of MOP@TpPa-CH3 are greater than those of TpPa-CH3 and MOP-NH2, where the CO generation rate of MOP@TpPa-CH3 under 10% CO2 still reaches 119.25 μmol g-1 h-1, which is 2.18 times higher than that under pure CO2 (54.74 μmol g-1 h-1). To investigate the structural factors affecting the photocatalytic activity, MOP@TBPa-CH3 without C═O groups is synthesized, and the photoreduction performance is also evaluated. The controlling experimental results demonstrate that the excellent photoreduction CO2 performance of MOP@TpPa-CH3 in a 10% CO2 atmosphere is due to the presence of C═O groups in TpPa-CH3. This work offers a new design and construction strategy for novel MOP@COF composites.

Regulating Local Electron Density of Cyano Sites in Graphitic Nitride Carbon by Giant Internal Electric Field for Efficient CO2 Photoreduction to Hydrocarbons

Selective photocatalytic CO2 reduction to high-value hydrocarbons using graphitic carbon nitride (g-C3N4) polymer holds great practical significance. Herein, the cyano-functionalized g-C3N4 (CN-g-C3N4) with a high local electron density site is successfully constructed for selective CO2 photoreduction to CH4 and C2H4. Wherein the potent electron-withdrawing cyano group induces a giant internal electric field in CN-g-C3N4, significantly boosting the directional migration of photogenerated electrons and concentrating them nearby. Thereby, a high local electron density site around its cyano group is created. Moreover, this structure can also effectively promote the adsorption and activation of CO2 while firmly anchoring *CO intermediates, facilitating their subsequent hydrogenation and coupling reactions. Consequently, using H2O as a reducing agent, CN-g-C3N4 achieves efficient and selective photocatalytic CO2 reduction to CH4 and C2H4 activity, with maximum rates of 6.64 and 1.35 µmol g-1 h-1, respectively, 69.3 and 53.8 times higher than bulk g-C3N4 and g-C3N4 nanosheets. In short, this work illustrates the importance of constructing a reduction site with high local electron density for efficient and selective CO2 photoreduction to hydrocarbons.

Rationally Designed S-Scheme CeO2/g-C3N4 Heterojunction for Promoting Visible Light Driven CO2 Photoreduction into Syngas

Exploring low-cost visible light photocatalysts for CO2 reduction to produce proportionally adjustable syngas is of great significance for meeting the needs of green chemical industry. A S-Scheme CeO2/g-C3N4 (CeO2/CN) heterojunction was constructed by using a simple two-step calcination method. During the photocatalytic CO2 reduction process, the CeO2/CN heterojunction can present a superior photocatalytic performance, and the obtained CO/H2 ratios in syngas can be regulated from 1 : 0.16 to 1 : 3.02. In addition, the CO and H2 production rate of the optimal CeO2/CN composite can reach 1169.56 and 429.12 μmol g-1 h-1, respectively. This superior photocatalytic performance is attributed to the unique S-Scheme photogenerated charge transfer mechanism between CeO2 and CN, which facilitates rapid charge separation and migration, while retaining the excellent redox capacity of both semiconductors. Particularly, the variable valence Ce3+/Ce4+ can act as electron mediator between CeO2 and CN, which can promote electron transfer and improve the catalytic performance. This work is expected to provide a new useful reference for the rational construction of high efficiency S-Scheme heterojunction photocatalyst, and improve the efficiency of photocatalytic reduction of CO2, promoting the photocatalytic reduction of CO2 into useful fuels.

Modulating Inorganic Dimensionality of Ultrastable Lead Halide Coordination Polymers for Photocatalytic CO2 Reduction to Ethanol

Lead halide hybrids have shown great potentials in CO2 photoreduction, but challenging to afford C2+ reduced products, especially using H2O as the reductant. This is largely due to the trade-off problem between instability of the benchmark 3D structures and low carrier mobility of quasi-2D analogues. Herein, the lead halide dimensionality of robust coordination polymers (CP) was modulated by organic ligands differing in a single-atom change (NH vs. CH2), in which the NH groups coordinate with interlamellar [PbI2] clusters to achieve the important 2D→3D transition. This first CP based on 3D cationic lead iodide sublattice possesses both high aqueous stability and a low exciton binding energy of 25 meV that is on the level of ambient thermal energy, achieving artificial photosynthesis of C2H5OH. Photophysical studies combined with theoretical calculations suggest the bridging [PbI2] clusters in the 3D structure not only results in enhanced carrier transport, but also promotes the intrinsic charge polarization to facilitate the C-C coupling. With trace loading of Rh cocatalyst, the apparent quantum efficiency of the 3D CP reaches 1.4 % at 400 nm with a high C2H5OH selectivity of 89.4 % (product basis), which presents one of the best photocatalysts for C2 products to date.

Cobalt(III) Halide Metal-Organic Frameworks Drive Catalytic Halogen Exchange

The selective halogenation of complex (hetero)aromatic systems is a critical yet challenging transformation that is relevant to medicinal chemistry, agriculture, and biomedical imaging. However, current methods are limited by toxic reagents, expensive homogeneous second- and third-row transition metal catalysts, or poor substrate tolerance. Herein, we demonstrate that porous metal-organic frameworks (MOFs) containing terminal Co(III) halide sites represent a rare and general class of heterogeneous catalysts for the controlled installation of chlorine and fluorine centers into electron-deficient (hetero)aryl bromides using simple metal halide salts. Mechanistic studies support that these halogen exchange (halex) reactions proceed via redox-neutral nucleophilic aromatic substitution (SNAr) at the Co(III) sites. The MOF-based halex catalysts are recyclable, enable green halogenation with minimal waste generation, and facilitate halex in a continuous flow. Our findings represent the first example of SNAr catalysis using MOFs, expanding the lexicon of synthetic transformations enabled by these materials.

Engineering the Sulfide Semiconductor/Photoinactive-MOF Heterostructure with a Hollow Cuboctahedral Structure to Enhance Photocatalytic CO2-Epoxide-Cycloaddition Efficiency

Providing efficient electronic transport channels has always been a promising strategy to mitigate the recombination of photogenerated charge carriers. In this study, a heterostructure composed of a semiconductor/photoinactive-metal-organic framework (MOF) was constructed to provide innovative channels for electronic transport. Prepared using a previously reported method ( Angew. Chem., Int. Ed. 2016, 55, 15301-15305) with slight modifications to temperature and reaction time, the CuS@HKUST-1 hollow cuboctahedron was synthesized. The CuS@HKUST-1 heterostructure possessed a well-defined cuboctahedral morphology with a uniform size of about 500 nm and a hollow structure with a thickness of around 50 nm. The CuS nanoparticles were uniformly distributed on the HKUST-1 shell. Structural characterization in cooperation with density functional theory (DFT) calculations revealed that CuS can effectively transfer photogenerated electrons to HKUST-1. CuS@HKUST-1 hollow cuboctahedrons were first introduced to the photocatalytic cycloaddition reaction of CO2 with epoxides, demonstrating excellent photocatalytic activity and stability at mild conditions (room temperature, solvent-free, and 1 atm CO2 pressure). The high photocatalytic performance of the CuS@HKUST-1 hollow cuboctahedron could be attributed to (1) the unique hollow cuboctahedron morphology, which provided a large specific surface area (693.1 m2/g) and facilitated the diffusion and transfer of reactants and products; and (2) CuS@HKUST-1 providing electronic transport channels from CuS to HKUST-1, which could enhance the adsorption and activation of CO2. Cu2+ carrying surplus electrons can activate CO2 to CO2-. The charge separation and transfer in the photocatalytic process can also be effectively promoted. This work provides a cost-effective and environmentally friendly approach for CO2 utilization reactions under ambient conditions, addressing the critical issue of rising atmospheric CO2 levels.

Finely Tuning Metal Ion Valences of [Fe3-xMx(μ3-OH)(Carboxyl)6(pyridyl)2] Cluster-Based ant-MOFs for Highly Improved CO2 Capture Performances

Solvothermal reactions of different trinuclear precursors and 5-(pyridin-4-yl)isophthalic acid (H2L) successfully led to four anionic ant topological MOFs as Fe3-xMx(μ3-OH)(CH3COO)2(L)2·(DMA+)·DMF [M = Mn(II), Fe(II), Co(II), x = 0, 1, 2 and 3], namely, NJTU-Bai79 [NJTU-Bai = Nanjing Tech University Bai's group, Mn3(μ3-OH)], NJTU-Bai80 [Fe2Mn(μ3-OH)], NJTU-Bai81 [Fe3(μ3-OH)], and NJTU-Bai82 [Fe2Co(μ3-OH)], which possess the narrow pores (2.5-6.0 Å). NJTU-Bai80-82 is able to be tuned to the neutral derivatives [NJTU-Bai80-82(-ox), ox = oxidized] with M2+ ions oxidized to M3+ ones in the air and the OH- ions coordinated on M3+ ions. Very interestingly, selective CO2/N2 adsorptions of NJTU-Bai80-82(-ox) are significantly enhanced with the CO2 adsorption uptakes more than about 6 times that of NJTU-Bai79. GCMC simulations further revealed that neutral NJTU-Bai80-82(-ox) supplies more open frameworks around the -CH3 groups at separate spaces to the CO2 gas molecules with relatively more pores available to them after the removal of counterions. For the first time, finely tuning metal ion valences of metal clusters of ionic MOFs and making them from electrostatic to neutral were adopted for greatly improving their CO2 capture properties, and it would provide another promising strategy for the exploration of high-performance CO2 capture materials.

Steering the Selectivity of Carbon Dioxide Electroreduction from Single-Carbon to Multicarbon Products on Metal-Organic Frameworks via Facet Engineering

Although metal-organic frameworks (MOFs) have attracted more attention for the electrocatalytic CO2 reduction reaction (CO2RR), obtaining multicarbon products with a high Faradaic efficiency (FE) remains challenging, especially under neutral conditions. Here, we report the controlled synthesis of stable Cu(I) 5-mercapto-1-methyltetrazole framework (Cu-MMT) nanostructures with different facets by rationally modulating the reaction solvents. Significantly, Cu-MMT nanostructures with (001) facets are acquired using isopropanol as a solvent, which favor multicarbon production with an FE of 73.75% and a multicarbon:single-carbon ratio of 3.93 for CO2RR in a neutral electrolyte. In sharp contrast, Cu-MMT nanostructures with (100) facets are obtained utilizing water, promoting single-carbon generation with an FE of 63.98% and a multicarbon: single-carbon ratio of only 0.18. Furthermore, this method can be extended to other Cu-MMT nanostructures with different facets in tuning the CO2 reduction selectivity. This work opens up new opportunities for the highly selective and efficient CO2 electroreduction to multicarbon products on MOFs via facet engineering.

Copper-Sulfur-Nitrogen Cluster Providing a Local Proton for Efficient Carbon Dioxide Photoreduction

Atomically precise Cu clusters are highly desirable as catalysts for CO2 reduction reaction (CO2 RR), and they provide an appropriate model platform for elaborating their structure-activity relationship. However, an efficient overall photocatalytic CO2 RR with H2 O using assembled Cu-cluster aggregates as single component photocatalyst has not been reported. Herein, we report a stable crystalline Cu-S-N cluster photocatalyst with local protonated N-H groups (denoted as Cu6 -NH). The catalyst exhibits suitable photocatalytic redox potentials, high structural stability, active catalytic species, and a narrow band gap, which account for its outstanding photocatalytic CO2 RR performance under visible light, with ≈100 % selectivity for CO evolution. Remarkably, systematic isostructural Cu-cluster control experiments, in situ infrared spectroscopy, and density functional theory calculations revealed that the protonated pyrimidine N atoms in the Cu6 -NH cluster act as a proton relay station, providing a local proton during the photocatalytic CO2 RR. This efficiently lowers the energy barrier for the formation of the *COOH intermediate, which is the rate-limiting step, efficiently enhancing the photocatalytic performance. This work lays the foundation for the development of atomically precise metal-cluster-based photocatalysts.

A ferrocene-modified stable metal-organic framework for efficient CO2 photoreduction reaction

A series of ferrocene-grafted/loaded stable metal-organic frameworks (MOFs), based on the classical NH2-MIL-125(Ti), were prepared to improve the light absorption and photogenerated charge migration of photocatalysts, which can achieve enhanced CO2-to-HCOOH reduction performance. This work highlights the obvious advantage of the modifiability of the MOF structure in optimizing the performance of the photocatalytic CO2RR.

Application of a Metal Cobalt Based on 4,6-Bis(imidazol-1-yl)isophthalicacid Metal-Organic -Framework Materials in Photocatalytic CO2 Reduction, Antibacterial, and Dye Adsorption

In this paper, the reported MOF ([Co(bimip)(H2O)0.5]·0.5H2O) was employed in photocatalytic CO2 reduction, antibacterial, and dye adsorption experiments. The photocatalytic activity of the MOF for CO2 reduction was systematically investigated. The high average CO generation rate of 3421.59 μmol·g-1·h-1 after 12 h confirms the efficient photocatalytic CO2 reduction ability of the MOF. At the same time, the MOF can completely inhibit the growth of S. aureus and C. albicans within 24 h when its concentration reaches 400 μg/mL and 500 μg/mL, respectively. The MOF has an adsorption capacity for CR. The adsorption rate was 83.42% at 60 min, and the adsorption capacity of the MOF for CR reached 500.00 mg·g-1.

MOF-based catalysts: insights into the chemical transformation of greenhouse and toxic gases

Metal-organic framework (MOF)-based catalysts are outstanding alternative materials for the chemical transformation of greenhouse and toxic gases into high-add-value products. MOF catalysts exhibit remarkable properties to host different active sites. The combination of catalytic properties of MOFs is mentioned in order to understand their application. Furthermore, the main catalytic reactions, which involve the chemical transformation of CH4, CO2, NOx, fluorinated gases, O3, CO, VOCs, and H2S, are highlighted. The main active centers and reaction conditions for these reactions are presented and discussed to understand the reaction mechanisms. Interestingly, implementing MOF materials as catalysts for toxic gas-phase reactions is a great opportunity to provide new alternatives to enhance the air quality of our planet.

Introducing Frustrated Lewis Pairs to Metal-Organic Framework for Selective Hydrogenation of N-Heterocycles

Hydrogenated nitrogen heterocyclic compounds play a critical role in the pharmaceutical, polymer, and agrochemical industries. Recent studies on partial hydrogenation of nitrogen heterocyclic compounds have focused on costly and toxic precious metal catalysts. As an important class of main-group catalysts, frustrated Lewis pairs (FLPs) have been widely applied in catalytic hydrogenation reactions. In principle, the combination of FLPs and metal-organic framework (MOF) is anticipated to efficiently enhance the recyclability performance of FLPs; however, the previously studied MOF-FLPs showed low reactivity in the hydrogenation of N-heterocycles compounds. Herein, we offer a novel P/B type MOF-FLP catalyst that was achieved via a solvent-assisted linker incorporation approach to boost catalytic hydrogenation reactions. Using hydrogen gas under moderate pressure, the proposed P/B type MOF-FLP can serve as a highly efficient heterogeneous catalyst for selective hydrogenation of quinoline and indole to tetrahydroquinoline and indoline-type drug compounds in high yield and excellent recyclability.

Kanamycin triggered nanozyme for homogeneous and amplified colorimetric detection of T4 polynucleotide kinase

It is of significance to develop efficient methods for detecting the activity of T4 polynucleotide kinase (T4 PNK) due to its essential role in the modulation of different life activities. In this work, we constructed a novel nanozyme using Kanamycin (KANA) as a trigger for the [Fe(CN)₆]^3- coordinated Cu₂(OH)₃NO₃ (Cu₂(OH)₃NO₃/[Fe(CN)₆]^3-) nanorods, and designed an amplified colorimetric method to detect T4 PNK. That was, the free KANA efficiently triggered the peroxidase-like activity of Cu₂(OH)₃NO₃/[Fe(CN)₆]^3-, while the bound KANA by its aptamer lost the stimulative capability for the nanomaterials. On the basis of the bioreaction regulated generation of the KANA aptamer, a highly sensitive colorimetric assay aided by the rolling circle amplification (RCA) reaction for the detection of T4 PNK was realized. Results showed that this assay can detect T4 PNK from 1.0 × 10^-3 to 10.0 U/mL, with a limit of detection (LOD) of 1.42 × 10^-4 U/mL. The assay also showed acceptable performance in the detection of T4 PNK in serum samples. In addition to the satisfactory sensitivity and selectivity, the displayed T4 PNK assay also presented merits of operational convenience, without labeling or immobilization process and did not require costly instrument. It is expected that the KANA as a stimulator would have extended biosensing applications by coupling various bioreactions that can produce the KANA aptamer.

Molecular Catalysis of Energy Relevance in Metal-Organic Frameworks: From Higher Coordination Sphere to System Effects

The modularity and synthetic flexibility of metal-organic frameworks (MOFs) have provoked analogies with enzymes, and even the term MOFzymes has been coined. In this review, we focus on molecular catalysis of energy relevance in MOFs, more specifically water oxidation, oxygen and carbon dioxide reduction, as well as hydrogen evolution in context of the MOF-enzyme analogy. Similar to enzymes, catalyst encapsulation in MOFs leads to structural stabilization under turnover conditions, while catalyst motifs that are synthetically out of reach in a homogeneous solution phase may be attainable as secondary building units in MOFs. Exploring the unique synthetic possibilities in MOFs, specific groups in the second and third coordination sphere around the catalytic active site have been incorporated to facilitate catalysis. A key difference between enzymes and MOFs is the fact that active site concentrations in the latter are often considerably higher, leading to charge and mass transport limitations in MOFs that are more severe than those in enzymes. High catalyst concentrations also put a limit on the distance between catalysts, and thus the available space for higher coordination sphere engineering. As transport is important for MOF-borne catalysis, a system perspective is chosen to highlight concepts that address the issue. A detailed section on transport and light-driven reactivity sets the stage for a concise review of the currently available literature on utilizing principles from Nature and system design for the preparation of catalytic MOF-based materials.

Hierarchical Hollow-TiO2@CdS/ZnS Hybrid for Solar-Driven CO2-Selective Conversion

Light-driven valorization conversion of CO₂ is an encouraging carbon-negative pathway that shifts energy-reliance from fossil fuels to renewables. Herein, a hierarchical urchin-like hollow-TiO₂@CdS/ZnS (HTO@CdS/ZnS) Z-scheme hybrid synthesized by an in situ self-assembly strategy presents superior photocatalytic CO₂-to-CO activity with nearly 100% selectivity. Specifically, benefitting from the reasonable architectural and interface design, as well as surface modification, this benchmarked visible-light-driven photocatalyst achieves a CO output of 62.2 μmol·h^-1 and a record apparent quantum yield of 6.54% with the Co(bpy)₃²⁺ (bpy = 2,2'-bipyridine) cocatalyst. It rivals all the incumbent selective photocatalytic conversion of CO₂ to CO in the CH₃CN/H₂O/TEOA reaction systems. Specifically, the addition of HTO and stabilized ZnS enables the photocatalyst to effectively upgrade optical and electrical performances, contributing to efficient light-harvesting and photogenerated carrier separation, as well as interfacial charge transfer. The tremendous enhancement of photocatalytic performance reveals the superiority of the Z-scheme heterojunction assembled from HTO and CdS/ZnS, featuring the inner electric field derived from the band bending of HTO@CdS/ZnS make CdS resistant to photocorrosion. This study allows access to inspire studies on rationally modeling and constructing diverse heterostructures for the storage and conversion of renewables and chemicals.

Converting CO2 into Value-Added Products by Cu2 O-Based Catalysts: From Photocatalysis, Electrocatalysis to Photoelectrocatalysis

Converting CO₂ into value-added products by photocatalysis, electrocatalysis, and photoelectrocatalysis is a promising method to alleviate the global environmental problems and energy crisis. Among the semiconductor materials applied in CO₂ catalytic reduction, Cu₂ O has the advantages of abundant reserves, low price and environmental friendliness. Moreover, Cu₂ O has unique adsorption and activation properties for CO₂ , which is conducive to the generation of C₂₊ products through CC coupling. This review introduces the basic principles of CO₂ reduction and summarizes the pathways for the generation of C₁ , C₂ , and C₂₊ products. The factors affecting CO₂ reduction performance are further discussed from the perspective of the reaction environment, medium, and novel reactor design. Then, the properties of Cu₂ O-based catalysts in CO₂ reduction are summarized and several optimization strategies to enhance their stability and redox capacity are discussed. Subsequently, the application of Cu₂ O-based catalysts in photocatalytic, electrocatalytic, and photoelectrocatalytic CO₂ reduction is described. Finally, the opportunities, challenges and several research directions of Cu₂ O-based catalysts in the field of CO₂ catalytic reduction are presented, which is guidance for its wide application in the energy and environmental fields is provided.

Ionothermal Synthesis of Metal-Organic Frameworks Using Low-Melting Metal Salt Precursors

Metal-organic frameworks (MOFs) are porous, crystalline materials constructed from organic linkers and inorganic nodes with myriad potential applications in chemical separations, catalysis, and drug delivery. A major barrier to the application of MOFs is their poor scalability, as most frameworks are prepared under highly dilute solvothermal conditions using toxic organic solvents. Herein, we demonstrate that combining a range of linkers with low-melting metal halide (hydrate) salts leads directly to high-quality MOFs without added solvent. Frameworks prepared under these ionothermal conditions possess porosities comparable to those prepared under traditional solvothermal conditions. In addition, we report the ionothermal syntheses of two frameworks that cannot be prepared directly under solvothermal conditions. Overall, the user-friendly method reported herein should be broadly applicable to the discovery and synthesis of stable metal-organic materials.

Graphene Oxide-Mediated Synthesis of Ultrathin Co-MOL for CO2 Photoreduction

Metal-organic framework (MOF) materials have broad application prospects in catalysis because of their ordered structure and molecular adjustability. However, the large volume of bulky MOF usually leads to insufficient exposure of the active sites and the obstruction of charge/mass transfer, which greatly limits their catalytic performance. Herein, we developed a simple graphene oxide (GO) template method to fabricate ultrathin Co-metal-organic layer (2.0 nm) on reduced GO (Co-MOL@r-GO). The as-synthesized hybrid material Co-MOL@r-GO-2 exhibits highly efficient photocatalytic performance for CO₂ reduction, and the CO yield can reach as high as 25,442 μmol/g_Co-MOL, which is over 20 times higher than that of the bulky Co-MOF. Systematic investigations demonstrate that GO can act as a template for the synthesis of the ultrathin Co-MOL with more active sites and can be used as the electron transport medium between the photosensitizer and the Co-MOL to enhance the catalytic activity for CO₂ photoreduction.

Facilitated Photocatalytic CO2 Reduction in Aerobic Environment on a Copper-Porphyrin Metal-Organic Framework

Herein, we fabricated a π-π stacking hybrid photocatalyst by combining two two-dimensional (2D) materials: g-C₃ N₄ and a Cu-porphyrin metal-organic framework (MOF). After an aerobic photocatalytic pretreatment, this hybrid catalyst exhibited an unprecedented ability to photocatalytically reduce CO₂ to CO and CH₄ under the typical level (20 %) of O₂ in the air. Intriguingly, the presence of O₂ did not suppress CO₂ reduction; instead, a fivefold increase compared with that in the absence of O₂ was observed. Structural analysis indicated that during aerobic pretreatment, the Cu node in the 2D-MOF moiety was hydroxylated by the hydroxyl generated from the reduction of O₂ . Then the formed hydroxylated Cu node maintained its structure during aerobic CO₂ reduction, whereas it underwent structural alteration and was reductively devitalized in the absence of O₂ . Theoretical calculations further demonstrated that CO₂ reduction, instead of O₂ reduction, occurred preferentially on the hydroxylated Cu node.

CO2 Photoactivation Study of Adenine Nucleobase: Role of Hydrogen-Bonding Traction

The discovery and in-depth study of non-biocatalytic applications of active biomolecules are essential for the development of biomimicry. Here, the effect of intermolecular hydrogen-bonding traction on the CO₂ photoactivation performance of adenine nucleobase by means of an adenine-containing model system (AMOF-1-4) is uncovered. Remarkably, the hydrogen-bonding schemes around adenines are regularly altered with the increase in the alkyl (methyl, ethyl, isopropyl, and tert-butyl) electron-donating capacity of the coordinated aliphatic carboxylic acids, and thus, lead to a stepwise improvement in CO₂ photoreduction activity. Density functional theory calculations demonstrate that strong intermolecular hydrogen-bonding traction surrounding adenine can obviously increase the adenine-CO₂ interaction energy and, therefore, result in a smoother CO₂ activation process. Significantly, this work also provides new inspiration for expanding the application of adenine to more small-molecule catalytic reactions.

Facet-Dependent Photocatalytic Behavior of Fe-soc-MOF for Carbon Dioxide Reduction

Exposing different facets on metal-organic frameworks (MOFs) is an efficient approach to regulate their photocatalytic performance for CO₂ reduction. Herein, Fe-soc-MOFs exposed with different facets were successfully synthesized, and the morphologies of Fe-soc-MOF exposed with eight {111} facets (Fe-soc-O) and that exposed with eight {111} and six {100} crystal facets (Fe-soc-M) are first reported. Fe-soc-MOFs have facet-dependent active sites on their surface and correspondingly different catalytic performance for photocatalytic CO₂ reduction. Fe-soc-O has the highest CO production of 1804 μmol g^-1 h^-1, while the Fe-soc-MOF exposed with six {100} facets (Fe-soc-C) has the best CO selectivity of 94.7%. Density functional theory (DFT) calculations demonstrate that the (111) facet has more favorable thermodynamic potential for CO₂ reduction and H₂ evolution compared with the (100) one, deriving from its facet-dependent active sites. This work shows that utilizing the facet-engineering strategy to regulate the active sites exposed on the surface of MOFs is feasible. The results display the relation between the facet of MOFs and the photocatalytic behavior for CO₂ reduction.

Two-dimensional heterostructures for photocatalytic CO2 reduction

The photocatalysis conversion of CO₂ into fuels has become an encouraging method to address climate and energy issues as a long-term solution. Single material suffers poor yield due to low light energy utilization and high recombination rate of photoinduced electron-hole pairs. It is an efficient approach to construct heterojunction through two or three materials to improve the photocatalytic performance. Recently, 2D-based heterojunction is getting popular for outstanding properties, such as special light collecting structure to enhance light harvest, intimate interface to facilitate charge transfer and separation, and large specific surface area to provide abundant reactive sites. Recently, some new 2D-based heterostructures materials (both structure and composition) have been developed with excellent performance. 2D materials exert structural and functional advantages in these fine composite photocatalysts. In this review, the literatures about the photocatalytic conversion of CO₂ are mainly summarized based on overall structure, interface type and material type of 2D-based heterojunction, with special attention given to the preparation, characterization, structural advantages and reaction mechanism of novel 2D-based heterojunction. This work is in hope of offering a basis for designing improved composite photocatalyst for CO₂ photoreduction.

Highly Efficient Visible-Light-Driven CO2-to-CO Conversion by Coordinatively Unsaturated Co-Salen Complexes in a Water-Containing System

The development of cost-effective catalysts for CO₂ reduction is highly desired but remains a significant challenge. The unsaturated coordination metal center in a catalyst is favorable for the process of catalytic CO₂ reduction. In this paper, two asymmetric salen ligands were used to synthesize two coordinatively unsaturated Co-salen complexes. The two Co-salen complexes exhibit an unsaturated coordination pattern and display high activity and CO selectivity for visible-light-driven CO₂ reduction in a water-containing system. The photocatalytic performance of 2 is higher than that of 1 because the reduction potential of the catalytic Co^II center and the energy barrier of the catalytic transition states of 2 are lower than those of 1, with turnover numbers (TON_CO), turnover frequencies (TOF), and CO selectivity values of 8640, 0.24 s^-1, and 97% for 2, respectively. The photocatalytic reduction of CO₂ to CO for 2 is well supported by control experiments and density functional theory (DFT) calculations.

Demystifying the roles of single metal site and cluster in CO2 reduction via light and electric dual-responsive polyoxometalate-based metal-organic frameworks

Photo- or electroreduction of carbon dioxide into highly valued products offers a promising strategy to achieve carbon neutrality. Here, a series of polyoxometalate-based metal-organic frameworks (M-POMOFs) were constructed by metalloporphyrins [tetrakis(4-carboxyphenyl)-porphyrin-M (M-TCPPs)] and reductive POM for photo- and electrocatalytic carbon dioxide reductions (PCR and ECR, respectively), and the mysteries between the roles of single metal site and cluster in catalysis were disclosed. Iron-POMOF exhibited an excellent selectivity (97.2%) with high methane production of 922 micromoles per gram in PCR, together with superior Faradaic efficiency for carbon dioxide to carbon monoxide (92.1%) in ECR. The underlying mechanisms were further clarified. Photogenerated electrons transferred from iron-TCPP to the POM cluster for methane generation under irradiation, while the abundant electrons flowed to the center of iron-TCPP for carbon monoxide formation under the applied electric field. The specific multielectron products generated on iron-POMOF through switching driving forces to control electron flow direction between single metal site and cluster catalysis.

Implanting CoOx Clusters on Ordered Macroporous ZnO Nanoreactors for Efficient CO2 Photoreduction

Despite suffering from slow charge-carrier mobility, photocatalysis is still an attractive and promising technology toward producing green fuels from solar energy. An effective approach is to design and fabricate advanced architectural materials as photocatalysts to enhance the performance of semiconductor-based photocatalytic systems. Herein, metal-organic-framework-derived hierarchically ordered porous nitrogen and carbon co-doped ZnO (N-C-ZnO) structures are developed as nanoreactors with decorated CoO_x nanoclusters for CO₂ -to-CO conversion driven by visible light. Introduction of hierarchical nanoarchitectures with highly ordered interconnected meso-macroporous channels shows beneficial properties for photocatalytic reduction reactions, including enhanced mobility of charge carriers throughout the highly accessible framework, maximized exposure of active sites, and inhibited recombination of photoinduced charge carriers. Density functional theory calculations further reveal the key role of CoO_x nanoclusters with high affinity to CO₂ molecules, and the CoO bonds formed on the surface of the composite exhibit stronger charge redistribution. As a result, the obtained CoO_x /N-C-ZnO demonstrates enhanced photocatalysis performance in terms of high CO yield and long-term stability.

Photocatalytic reduction of low-concentration CO2 by metal-organic frameworks

Direct conversion of diluted CO₂ to value-added chemical stocks and fuels with solar energy is an energy-saving approach to relieve global warming and realize a carbon-neutral cycle. The exploration of catalysts with both efficient CO₂ adsorption and reduction ability is significant to achieving this goal. Metal-organic frameworks (MOFs) are emerging in the field of low-concentration CO₂ reduction due to their highly tunable structure, high porosity, abundant active sites and excellent CO₂ adsorption capacity. This highlight outlines the advantages of MOFs for low-pressure CO₂ adsorption and the strategies to improve the photocatalytic performance of MOF materials at low CO₂ concentrations, including the functionalization of organic ligands, regulation of metal nodes and preparation of MOF composites or derivatives. This paper aims to provide possible avenues for the rational design and development of catalysts with the ability to reduce low-concentration CO₂ efficiently for practical applications.

Insights into the Superstable Mineralization of Chromium(III) from Wastewater by CuO

The removal of Cr^III ions from contaminated wastewater is of great urgency from both environmental protection and resource utilization perspectives. Herein, we developed a superstable mineralization method to immobilize Cr³⁺ ions from wastewater using CuO as a stabilizer, leading to the formation of a CuCr layered double hydroxide (denoted as CuCr-LDH). CuO showed a superior Cr³⁺ removal performance with a removal efficiency of 97.97% and a maximum adsorption capacity of 207.6 mg/g in a 13000 mg/L Cr³⁺ ion solution. In situ and ex situ X-ray absorption fine structure characterizations were carried out to elucidate the superstable mineralization mechanism. Two reaction pathways were proposed including coprecipitation-dissolution and topological transformation. The mineralized product of CuCr-LDH can be reused for the efficient removal of organic dyes, and the adsorption capacities were up to 248.0 mg/g for Congo red and 240.1 mg/g for Evans blue, respectively. Moreover, CuCr-LDH exhibited a good performance for photocatalytic CO₂ reduction to syngas (H₂/CO = 2.66) with evolution rates of 54.03 μmol/g·h for CO and of 143.94 μmol/g·h for H₂ under λ > 400 nm, respectively. More encouragingly, the actual tanning leather Cr³⁺ wastewater treated by CuO showed that Cr³⁺ can reduce from 3438 to 0.06 mg/L, which was much below discharge standards (1.5 mg/L). This work provides a new approach to the mineralization of Cr³⁺ ions through the "salt-oxide" route, and the findings reported herein may guide the future design of highly efficient mineralization agents for heavy metals.

Tailoring the catalytic performance of Cu/SiO2 for hydrogenolysis of biomass-derived 5-hydroxymethylfurfural to renewable fuels

Efficient conversion of biomass-derived 5-hydroxymethylfurfural (HMF) to renewable fuels such as 2,5-dimethylfuran (DMF) and 2,5-dimethyltetrahydrofuran (DMTHF) is of significance for sustainable energy supply. For efficient catalyst design, it is important to understand the catalytic behavior and clarify the influence of physico-chemical properties of catalyst on reaction performance. Herein, to study the structure-activity relationships of monometallic Cu catalysts for HMF hydrogenolysis, a series of Cu/SiO2 catalysts with different physico-chemical properties were prepared and compared for their catalytic performance in HMF hydrogenolysis. It was found that Cu/SiO2-HT-8.5 catalyst prepared by hydrothermal method showed excellent activity in HMF hydrohydrolysis reaction. Under the optimal reaction condition, the total yield of liquid fuels reaches 91.6% with 57.1% yield of DMF and 34.5% yield of DMTHF in THF solvent. Characterizations such as XRD, H2-TPR, N2-adsorption/desorption, TEM and XPS revealed that the Cu particles in the Cu/SiO2-HT-8.5 catalyst have uniform size and high dispersion. The Cu species and the SiO2 support have relatively weak interaction and are easy to be reduced to Cu0, which makes it show excellent activity in the hydrogenolysis of HMF.

Switching Excited State Distribution of Metal-Organic Framework for Dramatically Boosting Photocatalysis

Photosensitization associated with electron/energy transfer represents the central science of natural photosynthesis. Herein, we proposed a protocol to dramatically improve the sensitizing ability of metal-organic frameworks (MOFs) by switching their excited state distribution from ³ MLCT (metal-to-ligand charge transfer) to ³ IL (intraligand). The hierarchical organization of ³ IL MOFs and Co/Cu catalysts facilitates electron transfer for efficient photocatalytic H₂ evolution with a yield of 26 844.6 μmol g^-1 and CO₂ photoreduction with a record HCOOH yield of 4807.6 μmol g^-1 among all the MOF photocatalysts. Systematic investigations demonstrate that strong visible-light-absorption, long-lived excited state and ingenious multi-component synergy in the ³ IL MOFs can facilitate both interface and intra-framework electron transfer to boost photocatalysis. This work opens up an avenue to boost solar-energy conversion by engineering sensitizing centers at a molecular level.

Co-Doped Mn3 O4 Nanocubes via Galvanic Replacement Reactions for Photocatalytic Reduction of CO2 with High Turnover Number

The synthesis of Co-doped Mn₃ O₄ nanocubes was achieved via galvanic replacement reactions for photo-reduction of CO₂ . Co@Mn₃ O₄ nanocubes could efficiently photo-reduce CO₂ to CO with a remarkable turnover number of 581.8 using [Ru(bpy)₃ ]Cl₂  ⋅ 6H₂ O as photosensitizer and triethanolamine as sacrificial agent in acetonitrile and water. The galvanic replaced Co species are homogeneously distributed at the outer surface of Mn₃ O₄ , providing catalytic active sites during CO₂ reduction reactions, which facilitate the separation and migration of photogenerated charge carriers, further benefiting the outstanding photocatalytic performance of CO₂ reduction. Density functional theory calculations revealed that the decreasing of conduction band maximum in Co@Mn₃ O₄ was beneficial to the electron attachment from the excited sensitized molecule, which promoted photocatalytic reduction of CO₂ .

Selective detection of sulfasalazine antibiotic and its controllable photodegradation into 5-aminosalicylic acid by visible-light-responsive metal-organic framework

The extensive use of sulfasalazine (SSZ) antibiotics has brought potential threats to aquatic ecosystems and human health. Thus, necessary measures for the removal of SSZ must be taken to prevent arbitrary antibiotic exposure to the aquatic environment. However, not all the recent photocatalysts that have been used for the degradation of SSZ could not achieve the controlled release of SSZ and hence are losing their medicinal values. Herein, by utilizing an Eosin Y moiety as an efficient light-harvesting and emission site, an Eosin Y-based visible-light-responsive metal-organic framework has been synthesized and characterized, which exhibits high selectivity for detecting the antibiotic SSZ in water and simulated physiological conditions, with a detection limit of below 1 μM (0.4 μg mL^-1). It also represents the first example of a MOF-based photocatalyst for the controllable degradation of SSZ into 5-aminosalicylic acid with excellent catalytic activity and recyclability.

Microenvironment Regulation of {Co4IIO4} Cubane for Syngas Photosynthesis

It is a great challenging task for selectivity control of both CO₂ photoreduction and water splitting to produce syngas via precise microenvironment regulation. Herein, a series of UiO-type Eu-MOFs (Eu-bpdc, Eu-bpydc, Ru_x-Eu-bpdc, and Ru_x-Eu-bpydc) with different surrounding confined spaces were designed and synthesized. These photosensitizing Ru_x-Eu-MOFs were used as the molecular platform to encapsulate the [Co^II₄(dpy{OH}O)₄(OAc)₂(H₂O)₂]²⁺ (Co₄) cubane cluster for constructing Co₄@Ru_x-Eu-MOF (x = 0.1, 0.2, and 0.4) heterogeneous photocatalysts for efficient CO₂ photoreduction and water splitting. The H₂ and CO yields can reach 446.6 and 459.8 μmol·g^-1, respectively, in 10 h with Co₄@Ru_0.1-Eu-bpdc as the catalyst, and their total yield can be dramatically improved to 2500 μmol·g^-1 with the ratio of CO/H₂ ranging from 1:1 to 1:2 via changing the photosensitizer content in the confined space. By increasing the N content around the cubane, the photocatalytic performance drops sharply in Co₄@Ru_0.1-Eu-bpydc, but with an enhanced proportion of CO in the final products. In the homogeneous system, the Co₄ cubane was surrounding with Ru photosensitizers via week interactions, which can drive water splitting into H₂ with >99% selectivity. Comprehensive structure-function analysis highlights the important role of microenvironment regulation in the selectivity control via constructing homogeneous and heterogeneous photocatalytic systems. This work provides a new insight for engineering a catalytic microenvironment of the cubane cluster for selectivity control of CO₂ photoreduction and water splitting.

A Porous π-π Stacking Framework with Dicopper(I) Sites and Adjacent Proton Relays for Electroreduction of CO2 to C2+ Products

Crystalline porous materials sustained by supramolecular interactions (e.g., π-π stacking interactions) are a type of molecular crystals showing considerable stability, but their applications are rarely reported due to the high difficulty of their construction. Herein, a stable π-π stacking framework formed by a trinuclear copper(I) compound [Cu₃(HBtz)₃(Btz)Cl₂] (CuBtz, HBtz = benzotriazole) with pyrazolate-bridged dicopper(I) sites is reported and employed for electrochemical CO₂ reduction, showing an impressive performance of 73.7 ± 2.8% Faradaic efficiency for C₂₊ products [i.e., ethylene (44%), ethanol (21%), acetate (4.7%), and propanol (4%)] with a current density of 7.9 mA cm^-2 at the potential of -1.3 V versus RHE in an H-type cell and a Faradic efficiency (61.6%) of C₂₊ products with a current density of ≈1 A cm^-2 and a reaction rate of 5639 μmol m^-2 s^-1 at the potential of -1.6 V versus RHE in a flow cell device, representing an impressive performance reported to date. In-situ infrared spectroscopy, density functional theory calculations, and control experiments revealed that the uncoordinated nitrogen atoms of benzotriazolates in the immediate vicinity can act as proton relays and cooperate with the dicopper(I) site to promote the hydrogenation process of the *CO intermediate and the C-C coupling, resulting in the highly selective electroreduction of CO₂ to C₂₊ products.

Alumina-Supported Alpha-Iron(III) Oxyhydroxide as a Recyclable Solid Catalyst for CO2 Photoreduction under Visible Light

Photocatalytic conversion of CO2 into transportable fuels such as formic acid (HCOOH) under sunlight is an attractive solution to the shortage of energy and carbon resources as well as to the increase in Earth's atmospheric CO2 concentration. The use of abundant elements as the components of a photocatalytic CO2 reduction system is important, and a solid catalyst that is active, recyclable, nontoxic, and inexpensive is strongly demanded. Here, we show that a widespread soil mineral, alpha-iron(III) oxyhydroxide (α-FeOOH; goethite), loaded onto an Al2 O3 support, functions as a recyclable catalyst for a photocatalytic CO2 reduction system under visible light (λ>400 nm) in the presence of a RuII photosensitizer and an electron donor. This system gave HCOOH as the main product with 80-90 % selectivity and an apparent quantum yield of 4.3 % at 460 nm, as confirmed by isotope tracer experiments with 13 CO2 . The present work shows that the use of a proper support material is another method of catalyst activation toward the selective reduction of CO2 .

An in situ derived MOF@In2S3 heterojunction stabilizes Co(II)-salicylaldimine for efficient photocatalytic formic acid dehydrogenation

We report here the hierarchical construction of a molecular Co(II)-salicylaldimine catalyst and an in situ derived In₂S₃ semiconductor in a MOF@In₂S₃ heterojunction through sequentially controllable in situ etching and post-synthetic modification for photocatalytic hydrogen production from formic acid. The enhanced catalyst stability and facilitated charge carrier mobility between the In₂S₃ photosensitizers and Co catalyst realize a superior H₂ production rate of 18 746 μmol g^-1 h^-1 (selectivity > 99.9%) with a turnover number (TON) of up to 6146 in 24 h (apparent quantum efficiency of 3.8% at 420 nm), indicating a 165-fold enhancement over that of the pristine MOF. This work highlights a powerful strategy for synergistic Earth-abundant metal-based MOF photocatalysis in promoting H₂ production from FA.

Nickel metal-organic frameworks for visible-light CO2 reduction under mild reaction conditions

Photochemical CO₂ conversion into carbon fuel is a promising route to explore renewable energy and relieve climate change. However, it is still a key challenge to achieve high selectivity to CO and simultaneously achieve high conversion efficiency in photochemical CO₂ reduction. Herein, we demonstrate the effect of Ni metal centers as catalytic active sites for the photocatalytic conversion of CO₂ to CO by designing and constructing Ni metal-organic framework (Ni-MOF) materials. In pure CO₂, Ni-MOF catalyst exhibits outstanding performance for visible-light-driven reductive CO₂ deoxygenation with a high CO evolution rate of 19.13 μmol h^-1 (per 1 mg of catalyst) and CO selectivity of 91.4%, which exceeds those of most reported systems. Upon using isostructural Co-MOF as the catalyst to replace Ni-MOF, a moderate performance towards CO₂ photoreduction and low CO selectivity (40.1%) were observed, implying that the performance of CO₂ photoreduction and CO selectivity are dependent on unsaturated metal centers.