Synthesis, Structural Features, and Formation of Organometallic Derivates of C1-Bridged Cp/Amido Titanium and Zirconium “CpCN-Constrained Geometry” Systems

Synthesis, Characterization, and Comparative Theoretical Investigation of Dinitrogen-Bridged Group 6-Gold Heterobimetallic Complexes

We have prepared and characterized a series of unprecedented group 6-group 11, N2-bridged, heterobimetallic [ML4(η1-N2)(μ-η1:η1-N2)Au(NHC)]+ complexes (M = Mo, W, L2 = diphosphine) by treatment of trans-[ML4(N2)2] with a cationic gold(I) complex [Au(NHC)]+. The adducts are very labile in solution and in the solid, especially in the case of molybdenum, and decomposition pathways are likely initiated by electron transfers from the zerovalent group 6 atom to gold. Spectroscopic and structural parameters point to the fact that the gold adducts are very similar to Lewis pairs formed out of strong main-group Lewis acids (LA) and low-valent, end-on dinitrogen complexes, with a bent M-N-N-Au motif. To verify how far the analogy goes, we computed the electronic structures of [W(depe)2(η1-N2)(μ-η1:η1-N2)AuNHC]+ (10W+) and [W(depe)2(η1-N2)(μ-η1:η1-N2)B(C6F5)3] (11W). A careful analysis of the frontier orbitals of both compounds shows that a filled orbital resulting from the combination of the π* orbital of the bridging N2 with a d orbital of the group 6 metal overlaps in 10W+ with an empty sd hybrid orbital at gold, whereas in 11W with an sp3 hybrid orbital at boron. The bent N-N-LA arrangement maximizes these interactions, providing a similar level of N2 "push-pull" activation in the two compounds. In the gold case, the HOMO-2 orbital is further delocalized to the empty carbenic p orbital, and an NBO analysis suggests an important electrostatic component in the μ-N2-[Au(NHC)]+ bond.

Partnering a Three-Coordinate Gallium Cation with a Hydroborate Counter-Ion for the Catalytic Hydrosilylation of CO2

A novel β-diketiminate stabilized gallium hydride, (^Dipp L)Ga(Ad)H (where (^Dipp L)={HC(MeCDippN)₂ }, Dipp=2,6-diisopropylphenyl and Ad=1-adamantyl), has been synthesized and shown to undergo insertion of carbon dioxide into the Ga-H bond under mild conditions. In this case, treatment of the resulting κ¹ -formate complex with triethylsilane does not lead to regeneration of the hydride precursor. However, when combined with B(C₆ F₅ )₃ , (^Dipp L)Ga(Ad)H catalyses the reductive hydrosilylation of CO₂ . Under stoichiometric conditions, the addition of one equivalent of B(C₆ F₅ )₃ to (^Dipp L)Ga(Ad)H leads to the formation of a 3-coordinate cationic gallane complex, partnered with a hydroborate anion, [(^Dipp L)Ga(Ad)][HB(C₆ F₅ )₃ ]. This complex rapidly hydrometallates carbon dioxide and catalyses the selective reduction of CO₂ to the formaldehyde oxidation level at 60 °C in the presence of Et₃ SiH (yielding H₂ C(OSiEt₃ )₂ ). When catalysis is undertaken in the presence of excess B(C₆ F₅ )₃ , appreciable enhancement of activity is observed, with a corresponding reduction in selectivity: the product distribution includes H₂ C(OSiEt₃ )₂ , CH₄ and O(SiEt₃ )₂ . While this system represents proof-of-concept in CO₂ hydrosilylation by a gallium hydride system, the TOF values obtained are relatively modest (max. 10 h^-1 ). This is attributed to the strength of binding of the formatoborate anion to the gallium centre in the catalytic intermediate (^Dipp L)Ga(Ad){OC(H)OB(C₆ F₅ )₃ }, and the correspondingly slow rate of the turnover-limiting hydrosilylation step. In turn, this strength of binding can be related to the relatively high Lewis acidity measured for the [(^Dipp L)Ga(Ad)]⁺ cation (AN=69.8).

Organometallic Zirconium Compounds in an Oxygen-Rich Coordination Environment: Synthesis and Structural Characterization of Tris(oxoimidazolyl)hydroboratozirconium Compounds

A series of tris(oxoimidazolyl)hydroborato ligands, which serve as L₂X [O₃] donors, have been employed to obtain organometallic zirconium compounds in an uncommon oxygen-rich coordination environment. For example, Cp[To^MeBenz]ZrCl₂ has been synthesized via the reaction of [To^MeBenz]Na with CpZrCl₃ and bears a structural resemblance to the bent metallocene dichloride derivative Cp₂ZrCl₂. In addition, the half-sandwich counterparts [To^MeBenz]ZrCl₃ and [To^But]ZrCl₃ have been obtained by metathesis of ZrCl₄ with [To^MeBenz]Na and [To^But]Na, respectively. The structurally related zirconium benzyl compounds [To^RBenz]Zr(CH₂Ph)₃ (R = Me, Bu^t, 1-Ad) have also been synthesized via the reactions of [To^RBenz]Tl with Zr(CH₂Ph)₄, and X-ray diffraction studies demonstrate that the benzyl ligands in these compounds are conformationally flexible and exhibit a large range of Zr-CH₂-Ph bond angles (94.7-131.7°). Protolytic cleavage of one of the benzyl ligands of [To^RBenz]Zr(CH₂Ph)₃ (R = Bu^t, 1-Ad) may be achieved by treatment with [PhNHMe₂][B(C₆F₅)₄] to generate {[To^RBenz]Zr(CH₂Ph)₂}[B(C₆F₅)₄], which are catalysts for the polymerization of ethylene. The molecular structure of the ether adduct, {[To^ButBenz]Zr(CH₂Ph)₂(OEt₂)}[B(C₆F₅)₄], has been determined by X-ray diffraction. In addition to the use of tris(oxoimidazolyl)hydroborato ligands, bis(oxoimidazolyl)hydroborato ligands have also been used to obtain zirconium benzyl compounds in oxygen-rich environments, namely, [Bo^MeBenz]₂Zr(CH₂Ph)₂ and [Bo^AdBenz]₂Zr(CH₂Ph)₂.

Directed Amination of Aryl Methyl Ethers Mediated by Ti(NMe2)4 at Room Temperature

An efficient C-O amination of aryl methyl ethers has been achieved. This transformation proceeds via imine-directed Ti(IV)-mediated cross-coupling reactions between aryl methyl ethers and Ti(NR2)4 at room temperature, straightforwardly leading to a series of arylamines. This protocol features a wide substrate scope, exclusive regioselectivity, and mild reaction conditions.

Thiophene synthesis via 1,1-carboboration

Reaction of bis(tert-butylethynyl)sulfide with the boron Lewis acid reagents X–B(C₆F₅)₂ (X = CH₃, Cl, C₆F₅) in pentane at r.t. gave the respective borylated thiophenes in a sequence of 1,1-carboboration reactions.

Expanded-ring N-heterocyclic carbenes for the stabilization of highly electrophilic gold(I) cations

Strategies for the synthesis of highly electrophilic Au(I) complexes from either hydride- or chloride-containing precursors have been investigated by employing sterically encumbered Dipp-substituted expanded-ring NHCs (Dipp=2,6-iPr2 C6 H3 ). Thus, complexes of the type (NHC)AuH have been synthesised (for NHC=6-Dipp or 7-Dipp) and shown to feature significantly more electron-rich hydrides than those based on ancillary imidazolylidene donors. This finding is consistent with the stronger σ-donor character of these NHCs, and allows for protonation of the hydride ligand. Such chemistry leads to the loss of dihydrogen and to the trapping of the [(NHC)Au](+) fragment within a dinuclear gold cation containing a bridging hydride. Activation of the hydride ligand in (NHC)AuH by B(C6 F5 )3 , by contrast, generates a species (at low temperatures) featuring a [HB(C6 F5 )3 ](-) fragment with spectroscopic signatures similar to the "free" borate anion. Subsequent rearrangement involves BC bond cleavage and aryl transfer to the carbophilic metal centre. Under halide abstraction conditions utilizing Na[BAr(f) 4 ] (Ar(f) =C6 H3 (CF3 )2 -3,5), systems of the type [(NHC)AuCl] (NHC=6-Dipp or 7-Dipp) generate dinuclear complexes [{(NHC)Au}2 (μ-Cl)](+) that are still electrophilic enough at gold to induce aryl abstraction from the [BAr(f) 4 ](-) counterion.

A tripodal benzylene-linked trisamidophosphine ligand scaffold: synthesis and coordination chemistry with group(IV) metals

A new tripodal trisamidophosphine ligand (1) based on the trisbenzylphosphine backbone has been synthesized in three steps starting from NaPH2 and phthaloyl-protected 2-aminobenzyl bromide. At elevated temperatures, 1 reacts directly with M(NMe2)4 (M = Zr, Hf) to afford the dimethylamido complexes [PN3]M(NMe2) (M = Zr, Hf) (2), which are easily converted into the corresponding triflates [PN3]MOTf (M = Zr, Hf) (3) via reaction with triethylsilyl trifluoromethanesulfonate. The related titanium chloro complex [PN3]TiCl (4-Ti) is obtained from 1 and Bn3TiCl via protonolysis. Triple deprotonation of 1 with n-butyllithium affords the tris-lithium salt Li3[PN3] (1-Li), which serves as a common starting material for the preparation of all the group(IV) chlorides [PN3]MCl (M = Ti, Zr, Hf) (4). Upon treatment of 4-Ti with Bn2Mg(thf)2, formation of a benzyltitanium species is observed, which is converted cleanly into a ligand-CH-activated species (5-Ti).

1,1-Olefin-bridged bis-(2-indenyl) metallocenes of titanium and zirconium

Tetrasubstituted alkenes bearing geminal 2-indenyl substituents were synthesized and metallated to form a new class of ansa titanium and zirconium metallocene complexes containing a single sp²-hybridized carbon bridge.

Synthesis of sp3C1-Bridged Constrained Geometry Complexes and their Application for Copolymerization of Ethylene and 1-Octene

Novel sp3C1-bridged constrained geometry complexe(CGC) were synthesized, and fulvene was used as initial stuff, they were characterized by 1H-NMR, 13C NMR, MS and EA. The CGC/methylaluminoxane (MAO) system show activation for copolymerization of ethylene and 1-octene under 1.0 atmospheric pressure (Complex 2/MAO, 1.196 × 106 g-Polymer /mol-Zr•h, Pethylene = 1.0 atm, Al/Zr = 1000, time = 30 min,1-Octene content in polymer = 5.46 mol%).

Synthesis of [3]ferrocenophane-bridged Cp-amido zirconium complexes and ansa-zirconocene complexes and their use in catalytic polymerisation reactions

Starting from 1,1'-diacetylferrocene the ortho-amino,α-dimethylamino[3]ferrocenophane system 3 was prepared. This was converted to the o-imino,α-Cp-derivative 6. Subsequent treatment with e.g. an excess of methyllithium followed by ZrCl(2)(NMe(2))(2)(thf)(2) and Me(2)SiCl(2) eventually gave the [3]ferrocenophane based Cp-amido zirconium complex 11b. In a similar way the [3]ferrocenophane derived fluorenyl-Cp ansa-zirconocene dichloride complex 20 was obtained. The 20-methylalumoxane (MAO) system is an active homogeneous Ziegler-Natta catalyst for ethylene polymerization. The 11b-MAO system reacts efficiently with an ethene-1-octene mixture to yield a mixture of linear polyethylene plus the ethene-1-octene copolymer. The compounds 5, 8, 10b, 11b, 13, 14, and 20 were characterized by X-ray diffraction.

Carbon-carbon bond activation by 1,1-carboboration of internal alkynes

Internal alkynes undergo 1,1-carboboration reactions upon treatment with boranes RB(C(6)F(5))(2) (R = C(6)F(5), CH(3)) to yield trisubstituted alkenylboranes. These products can be used as substrates in Pd-catalyzed cross-coupling reactions.

1,1-carboboration of 1-alkynes: a conceptual alternative to the hydroboration reaction

Strongly electrophilic boranes R-B(C(6)F(5))(2) react readily with a variety of 1-alkynes by means of a 1,1-carboboration reaction to yield alkenylborane products, which can subsequently be used as reagents in metal catalyzed cross-coupling reactions.

The amido-bridged zirconocene's reactivity and catalytic behavior for ethylene polymerization

Reaction of the amido-bridged zirconium complex (CpSiMe(2)NSiMe(2)Cp)ZrCH(3) (1) (Cp = C(5)H(4)) with half an equivalent of B(C(6)F(5))(3) or Ph(3)CB(C(6)F(5))(4) afforded the binuclear zirconium complexes [(CpSiMe(2)NSiMe(2)Cp)Zr)(2)(mu-CH(3))][RB(C(6)F(5))(3)] (2a, R = CH(3), 2b, R = C(6)F(5)) with a methyl group as the bridge between the two zirconium atoms. In the presence of one equivalent of B(C(6)F(5))(3) or Ph(3)C(C(6)F(5))(4), 1 was transformed to the zwitterionic complexes [(CpSiMe(2)NSiMe(2)Cp)Zr][RB(C(6)F(5))(3)] (3a, R = CH(3), 3b, R = C(6)F(5)) which are free of a metal-bound sigma-alkyl ligand. 2b is stable with Me(3)Al while 3b combined with Me(3)Al to form a hetero-binuclear complex [(CpSiMe(2)NSiMe(2)Cp)Zr(mu-CH(3))]Al(CH(3))(2)][B(C(6)F(5))(4)] (4) as shown by NMR spectroscopy at room temperature. Treatment of 2a or 3a with an excess of Me(3)Al led to (CpSiMe(2)NSiMe(2)Cp)Zr(C(6)F(5)) (5) through a group exchange process. 2b, 3a and 5 have been characterized by X-ray diffraction studies. 2b, 2b, 3a and 3b were highly active catalysts for ethylene polymerization and copolymerization with 1-octene in the presence of trialkylaluminium, but the binuclear zirconium complexes (2a and 2b) showed higher activities than their mononuclear counterparts 3a and 3b. Polymerization activities varied with the trialkylaluminiums and increased with the trialkylaluminium concentration applied in the system. The product existed mainly in the form of Al(PE)(3) with polymeric chains, and its molecular weight and distribution were greatly influenced by the type and amount of trialkylaluminium applied in the catalytic system.