1
|
Malaheem MS, Abd Razak NA, Abu Osman NA. A systematic review of methods used to assist transtibial prosthetic alignment decision-making. Prosthet Orthot Int 2024; 48:242-257. [PMID: 38018968 DOI: 10.1097/pxr.0000000000000309] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Submit a Manuscript] [Subscribe] [Scholar Register] [Received: 10/07/2022] [Accepted: 09/28/2023] [Indexed: 11/30/2023]
Abstract
Prosthetic alignment is a highly subjective process that is still based on clinical judgments. Thus, researchers have aimed their effort to quantify prosthetic alignment by providing an objective method that can assist and guide prosthetists in achieving transtibial (TT) prosthetic alignment. This systematic review aimed to examine the current literature on TT prosthetic alignment to scope the qualitative and quantitative methods designed to guide prosthetists throughout the TT prosthetic alignment process as well as evaluate the reported instruments and devices that are used to align TT prostheses and their clinical feasibility. A literature search, completed in June 2022, was performed using the following databases: Web of Science (Clarivate), SCOPUS (Elsevier), and Pub Med (Medline) with searching terms focusing on TT, prosthesis, prosthetist, prosthetic alignment, and questionnaires, resulting in 2790 studies being screened. Twenty-four studies have used quantitative methodologies, where sensor technologies were found to be the most frequently proposed technology combined with gait analysis tools and/or subjective assessments. A qualitative method that assists prosthetists throughout the alignment process was not found. In this systematic review, we presented diverse methods for guiding and assisting clinical decision-making regarding TT prosthetic alignment. However, most of these methods considered varied parameters, and there is a need for elaboration toward standardized methods, which would improve the prosthetic alignment clinical outcome.
Collapse
Affiliation(s)
- Mohammad S Malaheem
- Department of Biomedical Engineering, Faculty of Engineering, University of Malaya, Kuala Lumpur, Malaysia
| | | | | |
Collapse
|
2
|
Manz S, Seifert D, Altenburg B, Schmalz T, Dosen S, Gonzalez-Vargas J. Using embedded prosthesis sensors for clinical gait analyses in people with lower limb amputation: A feasibility study. Clin Biomech (Bristol, Avon) 2023; 106:105988. [PMID: 37230008 DOI: 10.1016/j.clinbiomech.2023.105988] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Submit a Manuscript] [Subscribe] [Scholar Register] [Received: 01/30/2023] [Revised: 05/08/2023] [Accepted: 05/10/2023] [Indexed: 05/27/2023]
Abstract
BACKGROUND Biomechanical gait analyses are typically performed in laboratory settings, and are associated with limitations due to space, marker placement, and tasks that are not representative of the real-world usage of lower limb prostheses. Therefore, the purpose of this study was to investigate the possibility of accurately measuring gait parameters using embedded sensors in a microprocessor-controlled knee joint. METHODS Ten participants were recruited for this study and equipped with a Genium X3 prosthetic knee joint. They performed level walking, stair/ramp descent, and ascent. During these tasks, kinematics and kinetics (sagittal knee and thigh segment angle, and knee moment) were recorded using an optical motion capture system and force plates (gold standard), as well as the prosthesis-embedded sensors. Root mean square errors, relative errors, correlation coefficients, and discrete outcome variables of clinical relevance were calculated and compared between the gold standard and the embedded sensors. FINDINGS The average root mean square errors were found to be 0.6°, 5.3°, and 0.08 Nm/kg, for the knee angle, thigh angle, and knee moment, respectively. The average relative errors were 0.75% for the knee angle, 11.67% for the thigh angle, and 9.66%, for the knee moment. The discrete outcome variables showed small but significant differences between the two measurement systems for a number of tasks (higher differences only at the thigh). INTERPRETATION The findings highlight the potential of prosthesis-embedded sensors to accurately measure gait parameters across a wide range of tasks. This paves the way for assessing prosthesis performance in realistic environments outside the lab.
Collapse
Affiliation(s)
- Sabina Manz
- Ottobock SE & Co. KGaA, Duderstadt, Germany; Department of Health Science and Technology, Aalborg University, Aalborg, Denmark.
| | | | | | | | - Strahinja Dosen
- Department of Health Science and Technology, Aalborg University, Aalborg, Denmark
| | | |
Collapse
|
3
|
Frossard L, Langton C, Perevoshchikova N, Feih S, Powrie R, Barrett R, Lloyd D. Next-generation devices to diagnose residuum health of individuals suffering from limb loss: A narrative review of trends, opportunities, and challenges. J Sci Med Sport 2023:S1440-2440(23)00032-4. [PMID: 36878761 DOI: 10.1016/j.jsams.2023.02.004] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/14/2022] [Revised: 01/31/2023] [Accepted: 02/07/2023] [Indexed: 02/17/2023]
Abstract
OBJECTIVES There is a need for diagnostic devices that can assist prosthetic care providers to better assess and maintain residuum health of individuals suffering from neuromusculoskeletal dysfunctions associated with limb loss. This paper outlines the trends, opportunities, and challenges that will facilitate the development of next-generation diagnostic devices. DESIGN Narrative literature review. METHODS Information about technologies suitable for integration into next-generation diagnostic devices was extracted from 41 references. We considered the invasiveness, comprehensiveness, and practicality of each technology subjectively. RESULTS This review highlighted a trend toward future diagnostic devices of neuromusculoskeletal dysfunctions of the residuum capable to support evidence-based patient-specific prosthetic care, patient empowerment, and the development of bionic solutions. This device should positively disrupt the organization healthcare by enabling cost-utility analyses (e.g., fee-for-device business models) and addressing healthcare gaps due to labor shortages. There are opportunities to develop wireless, wearable and noninvasive diagnostic devices integrating wireless biosensors to measure change in mechanical constraints and topography of residuum tissues during real-life conditions as well as computational modeling using medical imaging and finite element analysis (e.g., digital twin). Developing the next-generation diagnostic devices will require to overcome critical barriers associated with the design (e.g., gaps between technology readiness levels of essential parts), clinical roll-out (e.g., identification of primary users), and commercialization (e.g., limited interest from investors). CONCLUSIONS We anticipate that next-generation diagnostic devices will contribute to prosthetic care innovations that will safely increase mobility, thereby improving the quality of life of the growing global population of individuals suffering from limb loss.
Collapse
Affiliation(s)
- Laurent Frossard
- Griffith Centre of Biomedical and Rehabilitation Engineering, Griffith University /Menzies Health Institute Queensland, Australia.
| | - Christian Langton
- Griffith Centre of Biomedical and Rehabilitation Engineering, Griffith University /Menzies Health Institute Queensland, Australia.
| | - Nataliya Perevoshchikova
- Griffith Centre of Biomedical and Rehabilitation Engineering, Griffith University /Menzies Health Institute Queensland, Australia.
| | - Stefanie Feih
- Griffith Centre of Biomedical and Rehabilitation Engineering, Griffith University /Menzies Health Institute Queensland, Australia.
| | | | - Rod Barrett
- Griffith Centre of Biomedical and Rehabilitation Engineering, Griffith University /Menzies Health Institute Queensland, Australia.
| | - David Lloyd
- Griffith Centre of Biomedical and Rehabilitation Engineering, Griffith University /Menzies Health Institute Queensland, Australia.
| |
Collapse
|
4
|
Hashimoto H, Kobayashi T, Gao F, Kataoka M. A proper sequence of dynamic alignment in transtibial prosthesis: insight through socket reaction moments. Sci Rep 2023; 13:458. [PMID: 36627325 PMCID: PMC9831980 DOI: 10.1038/s41598-023-27438-1] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/22/2022] [Accepted: 01/02/2023] [Indexed: 01/11/2023] Open
Abstract
Dynamic alignment in prosthetic fitting is important because it affects the user's stability, kinematics, and kinetics such as socket reaction moments. It is performed by tuning the spatial relationship between the transtibial prosthetic socket and the foot following sequential observational gait analysis in the three anatomical planes. However, the order of planes in which the adjustment should be performed is still unclear. To investigate the appropriate sequence of dynamic alignment adjustment, ten participants with transtibial amputation were asked to walk in different alignment conditions (flexion, extension, adduction, abduction; lateral, medial, anterior, and posterior translation of the socket, and plantarflexion, dorsiflexion, inversion, and eversion of the foot) to measure socket reaction moments in the out-of-planes (e.g., the effect of sagittal alignment on the coronal moment). A significant difference was found only among socket posterior translation, socket flexion, and baseline alignment in the coronal moment (P = 0.02). The results of the current and previous studies suggest that moments in the coronal plane are affected by alignment changes in all three planes, whereas moments in the sagittal plane are affected only by sagittal alignment changes. It is suggested that the procedure of alignment adjustments should be finalized in the coronal plane.
Collapse
Affiliation(s)
- Hiroshi Hashimoto
- Osaka Metropolitan University, Habikino City, Osaka Japan ,Pacific Supply Co. Ltd., Daito City, Osaka Japan
| | - Toshiki Kobayashi
- Department of Biomedical Engineering, Faculty of Engineering, The Hong Kong Polytechnic University, Hung Hom, Kowloon, Hong Kong, China.
| | - Fan Gao
- grid.266539.d0000 0004 1936 8438Department of Kinesiology and Health Promotion, University of Kentucky, Lexington, KY USA
| | | |
Collapse
|
5
|
Hashimoto H, Kobayashi T, Kataoka M, Okuda K. Angulation vs translation of transtibial prosthetic socket: their difference analyzed by socket reaction moments. Gait Posture 2022; 97:137-146. [PMID: 35952524 DOI: 10.1016/j.gaitpost.2022.06.014] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Submit a Manuscript] [Subscribe] [Scholar Register] [Received: 02/16/2022] [Revised: 04/22/2022] [Accepted: 06/30/2022] [Indexed: 02/02/2023]
Abstract
BACKGROUND Previous studies investigated the effects of alignment changes in transtibial prostheses on socket reaction moments. However, the effects of angular and translational alignment changes with equal displacement between the foot and the socket were not directly compared. RESEARCH QUESTIONS What are the different effects of angular and translational alignment changes in transtibial prostheses? METHODS Ten individuals with transtibial prostheses participated in the measurement of temporo-spatial parameters, socket reaction moments, and their timings under nine alignment conditions (3° flexion/extension, anterior/posterior translation, 6° adduction/abduction, medial/lateral translation, and baseline). The displacement of the prosthetic feet was set to be equal between the angular and translational changes. RESULTS No significant changes in walking speed were found. Similar effects were observed in the magnitudes, but not in timing, of the moments under angular and translational changes in the sagittal plane (p < 0.01 for the differences in peak extension moment among anterior translation, baseline, and extension conditions, and in peak flexion moment among anterior translation, baseline, and extension conditions). In the coronal plane, similar effects were found in the magnitudes of the moments in the early stance (p < 0.01 at 5 %, 20 %, and 75 % stance). A significant difference in magnitude was observed in the late stance (p < 0.01 between adduction and medial translation conditions). SIGNIFICANCE The timing of the socket reaction moment may be different in the sagittal plane, while the magnitudes of the socket reaction moment in the late stance may be different in the coronal plane between the angular and translational alignment changes.
Collapse
Affiliation(s)
- Hiroshi Hashimoto
- Osaka Prefecture University, Habikino City, Osaka, Japan; Pacific Supply co. Ltd., Daito City, Osaka, Japan.
| | - Toshiki Kobayashi
- Department of Biomedical Engineering, Faculty of Engineering, The Hong Kong Polytechnic University, Hong Kong, China
| | | | - Kuniharu Okuda
- Osaka Prefecture University, Habikino City, Osaka, Japan
| |
Collapse
|
6
|
Frossard L, Conforto S, Aszmann OC. Editorial: Bionics limb prostheses: Advances in clinical and prosthetic care. FRONTIERS IN REHABILITATION SCIENCES 2022; 3:950481. [PMID: 36189016 PMCID: PMC9397676 DOI: 10.3389/fresc.2022.950481] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Download PDF] [Subscribe] [Scholar Register] [Received: 05/22/2022] [Accepted: 07/18/2022] [Indexed: 11/17/2022]
Affiliation(s)
- Laurent Frossard
- Griffith Centre of Biomedical and Rehabilitation Engineering, Menzies Health Institute Queensland, Griffith University, Gold Coast, QLD, Australia
| | | | - Oskar C. Aszmann
- Bionic Laboratory of Extremity Reconstruction and Department of Plastic & Reconstructive Surgery, Medical University of Vienna, Vienna, Austria
| |
Collapse
|
7
|
Loading applied on osseointegrated implant by transtibial bone-anchored prostheses during daily activities: Preliminary characterization of prosthetic feet. ACTA ACUST UNITED AC 2020; 32:258-271. [PMID: 33013144 DOI: 10.1097/jpo.0000000000000280] [Citation(s) in RCA: 6] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/26/2022]
|
8
|
Taylor CE, Zhang Y, Qiu Y, Henninger HB, Foreman KB, Bachus KN. Estimated forces and moments experienced by osseointegrated endoprostheses for lower extremity amputees. Gait Posture 2020; 80:49-55. [PMID: 32485424 PMCID: PMC7417188 DOI: 10.1016/j.gaitpost.2020.05.018] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Submit a Manuscript] [Subscribe] [Scholar Register] [Received: 02/27/2020] [Revised: 04/20/2020] [Accepted: 05/13/2020] [Indexed: 02/02/2023]
Abstract
BACKGROUND Percutaneous osseointegrated (OI) docking of prosthetic limbs returns loading directly to the residual bone of individuals with amputations. Lower limb diaphyseal biomechanics have not been studied during the wide range of daily activities performed by individuals with lower extremity amputations; therefore, little is known about the loads experienced at the bone-endoprosthetic interface of a percutaneous OI device. RESEARCH QUESTION Does residual limb length and/or gender influence loading magnitudes in the diaphysis of the femur or tibia during daily activities? METHODS This observational study used motion capture data from 40 non-amputee volunteers performing nine activities ranging from low to high demand, to virtually simulate residual limbs of amputees. To simulate diaphyseal bone loading in individuals with lower limb amputations, virtual joints were defined during post-processing at 25, 50, and 75 % of residual limb length of both the femur and the tibia, representing six clinically relevant residual limb lengths for OI device placement. Peak axial distractive and compressive forces, torsional moments, and bending moments were calculated for each activity. Comparisons were made between genders and between different levels of the simulated residual limb. RESULTS For simulated above and below knee amputations, short residual limbs showed the highest average bending, torsion, and axial distractive loads, while axial compressive loads were highest for long residual limbs. Absolute maxima for all subjects showed this same trend, except in below knee torsion, where 75 % residual tibia length showed the maximum. The highest demand activities yielding peaks in all directions were cutting with right leg planted, jump, run, and fall. SIGNIFICANCE Overall, individuals with shorter residual limbs experienced higher diaphyseal forces. This should be taken into consideration during surgical implantation of percutaneous OI devices where residual limb length can potentially be shortened, and during rehabilitation of percutaneous OI patients.
Collapse
Affiliation(s)
- Carolyn E Taylor
- Department of Orthopaedics, University of Utah, 590 Wakara Way, Rm A100, Salt Lake City, UT, United States; Department of Biomedical Engineering, University of Utah, 36 S. Wasatch Drive, Rm 3100, Salt Lake City, UT, United States.
| | - Yue Zhang
- Study Design and Biostatistics Center, University of Utah, 295 Chipeta Way Rm 1n400, Salt Lake City, UT, United States.
| | - Yuqing Qiu
- Study Design and Biostatistics Center, University of Utah, 295 Chipeta Way Rm 1n400, Salt Lake City, UT, United States.
| | - Heath B Henninger
- Department of Orthopaedics, University of Utah, 590 Wakara Way, Rm A100, Salt Lake City, UT, United States; Department of Biomedical Engineering, University of Utah, 36 S. Wasatch Drive, Rm 3100, Salt Lake City, UT, United States.
| | - K Bo Foreman
- Department of Veterans Affairs, 500 Foothill Dr (151), Salt Lake City, UT, United States; Department of Orthopaedics, University of Utah, 590 Wakara Way, Rm A100, Salt Lake City, UT, United States; Department of Physical Therapy and Athletic Training, University of Utah, 520 Wakara Way, Salt Lake City, UT, United States.
| | - Kent N Bachus
- Department of Veterans Affairs, 500 Foothill Dr (151), Salt Lake City, UT, United States; Department of Orthopaedics, University of Utah, 590 Wakara Way, Rm A100, Salt Lake City, UT, United States; Department of Biomedical Engineering, University of Utah, 36 S. Wasatch Drive, Rm 3100, Salt Lake City, UT, United States.
| |
Collapse
|
9
|
Abstract
Vertical loading rate could be associated with residuum and whole body injuries affecting individuals fitted with transtibial prostheses. The objective of this study was to outline one out of five automated methods of extraction of vertical loading rate that stacked up the best against manual detection, which is considered the gold standard during pseudo-prosthetic gait. The load applied on the long axis of the leg of three males was recorded using a transducer fitted between a prosthetic foot and physiotherapy boot while walking on a treadmill for circa 30 min. The automated method of extraction of vertical loading rate, combining the lowest absolute average and range of 95% CI difference compared to the manual method, was deemed the most accurate and precise. The average slope of the loading rate detected manually over 150 strides was 5.56 ± 1.33 kN/s, while the other slopes ranged from 4.43 ± 0.98 kN/s to 6.52 ± 1.64 kN/s depending on the automated detection method. An original method proposed here, relying on progressive loading gradient-based automated extraction, produced the closest results (6%) to manual selection. This work contributes to continuous efforts made by providers of prosthetic and rehabilitation care to generate evidence informing reflective clinical decision-making.
Collapse
|
10
|
Frossard L, Leech B, Pitkin M. Inter-participant variability data in loading applied on osseointegrated implant by transtibial bone-anchored prostheses during daily activities. Data Brief 2019; 26:104510. [PMID: 31667273 PMCID: PMC6811920 DOI: 10.1016/j.dib.2019.104510] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.4] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/06/2019] [Revised: 08/19/2019] [Accepted: 09/05/2019] [Indexed: 10/31/2022] Open
Abstract
The data in this paper are related to the research article entitled "Loading applied on osseointegrated implant by transtibial bone-anchored prostheses during daily activities: Preliminary characterization of prosthetic feet" (Frossard et al., 2019: Accepted). This article contains the individual and grouped loading characteristics applied on transtibial osseointegrated implant generated while walking with bone-anchored prostheses including prosthetic feet with different index of anthropomorphicity. Inter-participant variability was presented for (A) the spatio-temporal characteristics, (B) the loading boundaries and (C) the loading local extremum during walking, ascending and descending ramp and stairs. These initial inter-participant variability benchmark datasets are critical to improve the efficacy and safety of prosthetic components for transtibial prostheses as well as the design of future automated algorithms and clinical trials. Online repository contains the files: https://doi.org/10.17632/vhc6sf7ngy.1.
Collapse
Affiliation(s)
| | - Barry Leech
- Barry Leech Prosthetics & Orthotics Pty Ltd, Southport, Australia
| | - Mark Pitkin
- Tufts University, Boston, MA, USA
- Poly-Orth International, Sharon, MA, USA
| |
Collapse
|
11
|
Frossard L. Loading characteristics data applied on osseointegrated implant by transfemoral bone-anchored prostheses fitted with basic components during daily activities. Data Brief 2019; 26:104492. [PMID: 31667256 PMCID: PMC6811875 DOI: 10.1016/j.dib.2019.104492] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.6] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/30/2019] [Revised: 08/29/2019] [Accepted: 08/30/2019] [Indexed: 11/28/2022] Open
Abstract
The data in this paper are related to the research articles entitled “Kinetics of transfemoral amputees with osseointegrated fixation performing common activities of daily living” (Lee et al., Clinical Biomechanics, 2007.22(6). p. 665–673) and “Magnitude and variability of loading on the osseointegrated implant of transfemoral amputees during walking” (Lee et al., Med Eng Phys, 2008.30(7). p. 825–833). This article contains the overall and individual loading characteristics applied on screw-type osseointegrated implant generated by transfemoral bone-anchored prostheses fitted with basic components during daily activities at self-selected comfortable pace. Overall and individual data was presented for the (A) spatio-temporal characteristics, (B) loading patterns, (C) loading boundaries and (D) the loading local extremum during level walking, ascending and descending ramp and stairs. Inter-participant variability of these new datasets with basic components is critical to improve the efficacy and safety of prosthetic components as well as the design of future automated algorithms and clinical trials. Online repository contains the files: https://data.mendeley.com/datasets/hh8rjjh73w/1.
Collapse
Affiliation(s)
- Laurent Frossard
- Queensland University of Technology, Brisbane, QLD, Australia.,Griffith University, Gold Coast, QLD, Australia.,University of the Sunshine Coast, Maroochydore, QLD, Australia.,YourResearchProject Pty Ltd, Brisbane, QLD, Australia
| |
Collapse
|
12
|
Frossard L, Leech B, Pitkin M. Inter-participant variability data in characterization of anthropomorphicity of prosthetic feet fitted to bone-anchored transtibial prosthesis. Data Brief 2019; 25:104195. [PMID: 31406899 PMCID: PMC6685672 DOI: 10.1016/j.dib.2019.104195] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.2] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/29/2019] [Accepted: 06/18/2019] [Indexed: 11/30/2022] Open
Abstract
The data in this paper are related to the research article entitled “Automated characterization of anthropomorphicity of prosthetic feet fitted to bone-anchored transtibial prosthesis” (Frossard et al., 2019: DOI: 10.1109/TBME.2019.2904713). This article contains the individual angles of dorsiflexion and bending moments generated while walking with transtibial bone-anchored prostheses including prosthetic feet with different index of anthropomorphicity. Inter-participant variability were presented for the (A) position of the load cell measuring directly to the bending moments, (B) patterns of angles of dorsiflexion and bending moment as well as moment-angle curves and (C) variations of magnitude of angles of dorsiflexion as well as the raw and bodyweight-normalized bending moments between toe contact and heel off. These initial inter-participant variability benchmark datasets are critical to design future automated algorithms and clinical trials. Online repository contains the files: https://eprints.qut.edu.au/127745/1/127745.pdf.
Collapse
Affiliation(s)
| | - Barry Leech
- Barry Leech Prosthetics & Orthotics Pty Ltd, Southport, Australia
| | - Mark Pitkin
- Tufts University, Boston, MA, USA.,Poly-Orth International, Sharon, MA, USA
| |
Collapse
|
13
|
Frossard L, Leech B, Pitkin M. Automated characterization of anthropomorphicity of prosthetic feet fitted to bone-anchored transtibial prosthesis. IEEE Trans Biomed Eng 2019; 66:10.1109/TBME.2019.2904713. [PMID: 30872221 PMCID: PMC6926161 DOI: 10.1109/tbme.2019.2904713] [Citation(s) in RCA: 13] [Impact Index Per Article: 2.6] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/12/2023]
Abstract
OBJECTIVE This study describes differentiating prosthetic feet designs fitted to bone-anchored transtibial prostheses based on an automated characterization of ankle stiffness profile relying on direct loading measurements. The objectives were (A) to present a process characterizing stiffness using innovative macro, meso and micro analyses, (B) to present stiffness profiles for feet with and without anthropomorphic designs, where anthropomorphicity is defined as a similarity of the moment-angle dependency in prosthetic and in the anatomical ankle, (C) to determine sensitivity of characterization. METHODS Three participants walked consecutively with two instrumented bone-anchored prostheses including their own prosthetic feet and Free-Flow foot meeting the anthropomorphicity criterion by design. Angle of dorsiflexion was extracted from video footage. Bending moment was recorded using multi-axis transducer attached to osseointegrated fixation. The automated characterization of stiffness involved a 12-step process relying on data-based criterion. RESULTS The meso analyses confirmed bilinear behavior of moment-angle curves with Index of Anthropomorphicity of -2.966±2.369 Nm/Deg and 2.681±1.089 Nm/Deg indicating a convex and concave shape of usual and Free-Flow feet without and with anthropomorphic designs, respectively. CONCLUSIONS The proposed straightforward meso analysis of the stiffness was capable to report clinical meaningful differences sensitive to feet's anthropomorphicity. Results confirmed the benefits for clinicians to rely on direct loading measurement providing individualized complementary insight into impact of components. SIGNIFICANCE This work could assist the developments of standards and guidelines for manufacturing and safe fitting of components to growing population requiring transtibial prostheses with socket or direct skeletal attachment worldwide.
Collapse
Affiliation(s)
| | - Barry Leech
- Barry Leech Prosthetics & Orthotics Pty Ltd, Southport, Australia
| | - Mark Pitkin
- Tufts University, Boston, MA, USA and Poly-Orth International, Sharon, MA, USA
| |
Collapse
|
14
|
Thesleff A, Ludvigsson S, Ohr E, Ortiz-Catalan M. Load exposure of osseointegrated implants for transfemoral limb prosthesis during running. ANNUAL INTERNATIONAL CONFERENCE OF THE IEEE ENGINEERING IN MEDICINE AND BIOLOGY SOCIETY. IEEE ENGINEERING IN MEDICINE AND BIOLOGY SOCIETY. ANNUAL INTERNATIONAL CONFERENCE 2018; 2018:1743-1746. [PMID: 30440732 DOI: 10.1109/embc.2018.8512592] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/09/2022]
Abstract
Direct skeletal attachment of lower limb prostheses ensures direct load transfer between the prosthetic leg and the skeleton. Knowledge of the load characteristics at the boneimplant interface during high-loading activities is needed to understand the limitations of current implant systems, as well as to inform their future development. The present study estimates the load scenario at the bone-implant interface of a transfemoral amputee while running with kinematic symmetry between the prosthetic and the intact limbs corresponding to that of an ablebodied subject. Kinematic symmetry was used as this represents the ultimate aim of advanced bionic legs. Kinematic data and ground reaction forces from a running trial of an able-bodied subject were matched to a musculoskeletal model of a transfemoral amputee. The joint reaction forces at the boneimplant interface were calculated using inverse dynamics. The normalized peak forces and moments during a single gait cycle were calculated to 153 % BW (body weight) / -14.8 % BWm, 186 % BW / 16.2 % BWm and 56.8 % BW / -18.7 % BWm for the x- (anterior), y- (longitudinal), and z-axis (lateral-medial), respectively. These findings can potentially be used as design input for future implant systems and external safety devices.
Collapse
|
15
|
Andrysek J, Tomasi J, Leineweber M, Eshraghi A. A New Modeling Method to Characterize the Stance Control Function of Prosthetic Knee Joints. IEEE Trans Biomed Eng 2018; 66:1184-1192. [PMID: 30222547 DOI: 10.1109/tbme.2018.2869985] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/05/2022]
Abstract
OBJECTIVE Biomechanical models can inform design and optimization of prosthetic devices by connecting empirically derived biomechanical data to device design parameters. A new method is presented to characterize the function of prosthetic stance control under mobility conditions associated with activities of daily living. The method is based on a model of the gait modes corresponding to finite stance control states. METHODS Empirical data from amputee and simulated gait were acquired using a custom-built wearable instrument and input into the model. RESULTS The modeling approach was shown to be robust, responsive, and capable of accurate characterization of controller function under diverse locomotor and prosthetic setup conditions. CONCLUSION Future work is focused on the development of a fully self-contained wearable system, to facilitate collection of large datasets across a variety of user demographics, controller designs, and activities of daily living. SIGNIFICANCE The method offers predictive capability, which can assist in the virtual testing of new designs or modifications.
Collapse
|
16
|
Pather S, Vertriest S, Sondergeld P, Ramis MA, Frossard L. Load characteristics following transfemoral amputation in individuals fitted with bone-anchored prostheses: a scoping review protocol. ACTA ACUST UNITED AC 2018; 16:1286-1310. [PMID: 29894396 DOI: 10.11124/jbisrir-2017-003398] [Citation(s) in RCA: 6] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/29/2022]
Abstract
REVIEW QUESTION The main purpose of this scoping review is to characterize loading information applied on the residuum of individuals with transfemoral amputation fitted with an osseointegrated fixation for bone-anchored prostheses.The objectives of this scoping review are: i) to map the scope of loading variables, and ii) to report the range of magnitude of loads that has been directly measured using a portable kinetic recording apparatus fitted at the distal end of the residuum during rehabilitation exercises, standardized and unscripted activities of daily living, and adverse events.The specific review questions are.
Collapse
Affiliation(s)
- Shanthan Pather
- School of Chemistry, Physics and Mechanical Engineering, Faculty of Science and Engineering, Queensland University of Technology, Brisbane, Australia
| | - Sofie Vertriest
- Department of Physical and Rehabilitation Medicine, University Hospital, Ghent, Belgium
| | - Peter Sondergeld
- Library, Queensland University of Technology, Brisbane, Australia
| | - Mary-Anne Ramis
- CEBHA (Centre for Evidence-Based Healthy Ageing): a Joanna Briggs Institute Centre of Excellence
| | - Laurent Frossard
- School of Exercise and Nutrition Science, Faculty of Health, Queensland University of Technology, Brisbane, Australia.,School of Health and Sport Sciences, Faculty of Science, Health, Education and Engineering, University of the Sunshine Coast, Maroochydore, Australia
| |
Collapse
|
17
|
|
18
|
Dickinson A, Steer J, Worsley P. Finite element analysis of the amputated lower limb: A systematic review and recommendations. Med Eng Phys 2017; 43:1-18. [DOI: 10.1016/j.medengphy.2017.02.008] [Citation(s) in RCA: 38] [Impact Index Per Article: 5.4] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/20/2016] [Revised: 01/17/2017] [Accepted: 02/10/2017] [Indexed: 01/18/2023]
|
19
|
Dumas R, Branemark R, Frossard L. Gait Analysis of Transfemoral Amputees: Errors in Inverse Dynamics Are Substantial and Depend on Prosthetic Design. IEEE Trans Neural Syst Rehabil Eng 2016; 25:679-685. [PMID: 28113632 DOI: 10.1109/tnsre.2016.2601378] [Citation(s) in RCA: 21] [Impact Index Per Article: 2.6] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/08/2022]
Abstract
Quantitative assessments of prostheses performances rely more and more frequently on gait analysis focusing on prosthetic knee joint forces and moments computed by inverse dynamics. However, this method is prone to errors, as demonstrated in comparison with direct measurements of these forces and moments. The magnitude of errors reported in the literature seems to vary depending on prosthetic components. Therefore, the purposes of this study were (A) to quantify and compare the magnitude of errors in knee joint forces and moments obtained with inverse dynamics and direct measurements on ten participants with transfemoral amputation during walking and (B) to investigate if these errors can be characterised for different prosthetic knees. Knee joint forces and moments computed by inverse dynamics presented substantial errors, especially during the swing phase of gait. Indeed, the median errors in percentage of the moment magnitude were 4% and 26% in extension/flexion, 6% and 19% in adduction/abduction as well as 14% and 27% in internal/external rotation during stance and swing phase, respectively. Moreover, errors varied depending on the prosthetic limb fitted with mechanical or microprocessor-controlled knees. This study confirmed that inverse dynamics should be used cautiously while performing gait analysis of amputees. Alternatively, direct measurements of joint forces and moments could be relevant for mechanical characterising of components and alignments of prosthetic limbs.
Collapse
|
20
|
Al-Fakih EA, Abu Osman NA, Mahmad Adikan FR. Techniques for Interface Stress Measurements within Prosthetic Sockets of Transtibial Amputees: A Review of the Past 50 Years of Research. SENSORS 2016; 16:s16071119. [PMID: 27447646 PMCID: PMC4970162 DOI: 10.3390/s16071119] [Citation(s) in RCA: 52] [Impact Index Per Article: 6.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 03/18/2016] [Revised: 05/12/2016] [Accepted: 06/02/2016] [Indexed: 11/18/2022]
Abstract
The distribution of interface stresses between the residual limb and prosthetic socket of a transtibial amputee has been considered as a direct indicator of the socket quality fit and comfort. Therefore, researchers have been very interested in quantifying these interface stresses in order to evaluate the extent of any potential damage caused by the socket to the residual limb tissues. During the past 50 years a variety of measurement techniques have been employed in an effort to identify sites of excessive stresses which may lead to skin breakdown, compare stress distributions in various socket designs, and evaluate interface cushioning and suspension systems, among others. The outcomes of such measurement techniques have contributed to improving the design and fitting of transtibial sockets. This article aims to review the operating principles, advantages, and disadvantages of conventional and emerging techniques used for interface stress measurements inside transtibial sockets. It also reviews and discusses the evolution of different socket concepts and interface stress investigations conducted in the past five decades, providing valuable insights into the latest trends in socket designs and the crucial considerations for effective stress measurement tools that lead to a functional prosthetic socket.
Collapse
Affiliation(s)
- Ebrahim A Al-Fakih
- Department of Biomedical Engineering, Faculty of Engineering, University of Malaya, Kuala Lumpur 50603, Malaysia.
| | - Noor Azuan Abu Osman
- Department of Biomedical Engineering, Faculty of Engineering, University of Malaya, Kuala Lumpur 50603, Malaysia.
| | - Faisal Rafiq Mahmad Adikan
- Department of Electrical Engineering, Faculty of Engineering, University of Malaya, Kuala Lumpur 50603, Malaysia.
| |
Collapse
|
21
|
Hafner BJ, Sanders JE. Considerations for development of sensing and monitoring tools to facilitate treatment and care of persons with lower-limb loss: a review. ACTA ACUST UNITED AC 2015; 51:1-14. [PMID: 24805889 DOI: 10.1682/jrrd.2013.01.0024] [Citation(s) in RCA: 41] [Impact Index Per Article: 4.6] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/27/2013] [Revised: 07/09/2013] [Indexed: 11/05/2022]
Abstract
Sensing and monitoring technologies offer enormous potential to enhance the quality of healthcare provided to persons with lower-limb loss. Incorporation of these technologies into the rehabilitation process creates opportunities for a multidimensional exchange of timely, relevant, and meaningful health information between patients, their prostheses, and healthcare providers. Here, the authors envision a conceptual model for enhancing prosthetic rehabilitation through use of integrated physical and/or biological sensors and remote monitoring methods. Several specific applications that target treatment, diagnosis, and prognosis of health issues faced by persons with limb loss are proposed in an effort to demonstrate how collecting and using objective data can facilitate clinical decision making. Contemporary integrated sensors that may be used in these applications are reviewed and their limitations discussed. It is hoped that the considerations proposed here may serve to stimulate development of clinically useful monitoring and sensing technologies and promote their integration into routine amputation rehabilitation.
Collapse
Affiliation(s)
- Brian J Hafner
- Departments of Rehabilitation Medicine and Bioengineering, University of Washington, Seattle, WA
| | | |
Collapse
|
22
|
Vertriest S, Coorevits P, Hagberg K, Brånemark R, Häggström E, Vanderstraeten G, Frossard L. Static load bearing exercises of individuals with transfemoral amputation fitted with an osseointegrated implant: reliability of kinetic data. IEEE Trans Neural Syst Rehabil Eng 2014; 23:423-30. [PMID: 25051557 DOI: 10.1109/tnsre.2014.2337956] [Citation(s) in RCA: 20] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/09/2022]
Abstract
This study aimed at presenting the intra-tester reliability of the static load bearing exercises (LBEs) performed by individuals with transfemoral amputation (TFA) fitted with an osseointegrated implant to stimulate the bone remodeling process. There is a need for a better understanding of the implementation of these exercises particularly the reliability. The intra-tester reliability is discussed with a particular emphasis on inter-load prescribed, inter-axis and inter-component reliabilities as well as the effect of body weight normalization. Eleven unilateral TFAs fitted with an OPRA implant performed five trials in four loading conditions. The forces and moments on the three axes of the implant were measured directly with an instrumented pylon including a six-channel transducer. Reliability of loading variables was assessed using intraclass correlation coefficients (ICCs) and percentage standard error of measurement values ( %SEMs ). The ICCs of all variables were above 0.9 and the %SEM values ranged between 0 and 87%. This study showed a high between-participants' variance highlighting the lack of loading consistency typical of symptomatic population as well as a high reliability between the loading sessions indicating a plausible correct repetition of the LBE by the participants. However, these outcomes must be understood within the framework of the proposed experimental protocol.
Collapse
|
23
|
Neumann ES, Brink J, Yalamanchili K, Lee JS. Use of a load cell and force-moment curves to compare transverse plane moment loads on transtibial residual limbs: A preliminary investigation. Prosthet Orthot Int 2014; 38:253-62. [PMID: 23921596 DOI: 10.1177/0309364613497048] [Citation(s) in RCA: 8] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Submit a Manuscript] [Subscribe] [Scholar Register] [Received: 01/15/2013] [Accepted: 06/17/2013] [Indexed: 02/03/2023]
Abstract
BACKGROUND AND AIM The objective of this study was to demonstrate how a load cell and force-moment curves can be used outside of a gait lab to directly measure and evaluate the transverse plane loading moment on transtibial residual limbs. TECHNIQUE A load cell was attached distally to the socket of three transtibial amputees who walked a straight path and a circle of 3.048-m diameter with the prosthetic foot both inside and outside the curved path. DISCUSSION Compared to straight path walking, transverse plane moment decreased when the foot was on the outside of the curved path. When the foot was on the inside, the moment did not exceed that for straight path walking for two participants; maximum transverse moment was approximately 0.15 N m/kg of body mass. Force-moment curves indicated that each participant's gait was unique, but underlying similarities were observed with respect to each of the three conditions. CLINICAL RELEVANCE A load cell in conjunction with curved and straight path walking and force-moment curves can be used outside of a gait lab to measure and examine the transverse plane loading on the residual limb.
Collapse
Affiliation(s)
- Edward S Neumann
- Dept of Civil Engineering, University of Nevada, Las Vegas, NV, USA
| | - Justin Brink
- Dept of Mechanical Enginneering, University of Nevada, Las Vegas, NV, USA
| | | | - Joon S Lee
- Dept of Mechanical Enginneering, University of Nevada, Las Vegas, NV, USA
| |
Collapse
|
24
|
Kobayashi T, Orendurff MS, Zhang M, Boone DA. Individual responses to alignment perturbations in socket reaction moments while walking in transtibial prostheses. Clin Biomech (Bristol, Avon) 2014; 29:590-4. [PMID: 24792233 DOI: 10.1016/j.clinbiomech.2014.04.002] [Citation(s) in RCA: 11] [Impact Index Per Article: 1.1] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Submit a Manuscript] [Subscribe] [Scholar Register] [Received: 02/15/2014] [Revised: 04/03/2014] [Accepted: 04/07/2014] [Indexed: 02/07/2023]
Abstract
BACKGROUND The alignment of transtibial prostheses has a systematic effect on the mean socket reaction moments in amputees. However, understanding their individual differences in response to alignment perturbations is also important for prosthetists to fully utilize the socket reaction moments for dynamic alignment in each unique patient. The aim of this study was to investigate individual responses to alignment perturbations in transtibial prostheses with solid-ankle-cushion-heel feet. METHODS A custom instrumented prosthesis alignment component was used to measure the socket reaction moments while walking in 11 amputees with transtibial prostheses under 17 alignment conditions, including 3° and 6° of flexion, extension, abduction, and adduction of the socket, 5mm and 10mm of anterior, posterior, lateral, and medial translation of the socket, and an initial baseline alignment. Coronal moments at 30% of stance and maximum sagittal moments were extracted for comparisons from each amputee. FINDINGS In the coronal plane, varus moment at 30% of stance was generally reduced by adduction or medial translation of the socket in all the amputees. In the sagittal plane, extension moment was generally increased by posterior translation or flexion of the socket; however, this was not necessarily the case for all the amputees. INTERPRETATIONS Individual responses to alignment perturbations are not always consistent, and prosthetists would need to be aware of this variance when addressing individual socket reaction moments during dynamic alignment in clinical setting.
Collapse
Affiliation(s)
| | | | - Ming Zhang
- Interdisciplinary Division of Biomedical Engineering, Faculty of Engineering, The Hong Kong Polytechnic University, Hong Kong, China
| | | |
Collapse
|
25
|
Koehler SR, Dhaher YY, Hansen AH. Cross-validation of a portable, six-degree-of-freedom load cell for use in lower-limb prosthetics research. J Biomech 2014; 47:1542-7. [DOI: 10.1016/j.jbiomech.2014.01.048] [Citation(s) in RCA: 33] [Impact Index Per Article: 3.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/20/2013] [Revised: 01/30/2014] [Accepted: 01/31/2014] [Indexed: 11/16/2022]
|
26
|
Criterion and construct validity of prosthesis-integrated measurement of joint moment data in persons with transtibial amputation. J Appl Biomech 2014; 30:431-8. [PMID: 24603673 DOI: 10.1123/jab.2013-0309] [Citation(s) in RCA: 14] [Impact Index Per Article: 1.4] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/18/2022]
Abstract
Prosthesis-integrated sensors are appealing for use in clinical settings where gait analysis equipment is unavailable, but accurate knowledge of patients' performance is desired. Data obtained from load cells (inferring joint moments) may aid clinicians in the prescription, alignment, and gait rehabilitation of persons with limb loss. The purpose of this study was to assess the accuracy of prosthesis-integrated load cells for routine use in clinical practice. Level ground walking of persons with transtibial amputation was concurrently measured with a commercially available prosthesis-integrated load cell, a 10-camera motion analysis system, and piezoelectric force plates. Ankle and knee flexion/extension moments were derived and measurement methods were compared via correlation analysis. Pearson correlation coefficients ranged from 0.661 for ankle pronation/supination moments to 0.915 for ankle flexion/extension moments (P < .001). Root mean squared errors between measurement methods were in the magnitude of 10% of the measured range and were explainable. Differences in results depicted differences between systems in definition and computation of measurement variables. They may not limit clinical use of the load cell, but should be considered when data are compared directly to conventional gait analysis data. Construct validity of the load cell (ie, ability to measure joint moments in-situ) is supported by the study results.
Collapse
|
27
|
Kobayashi T, Orendurff MS, Arabian AK, Rosenbaum-Chou TG, Boone DA. Effect of prosthetic alignment changes on socket reaction moment impulse during walking in transtibial amputees. J Biomech 2014; 47:1315-23. [PMID: 24612718 DOI: 10.1016/j.jbiomech.2014.02.012] [Citation(s) in RCA: 25] [Impact Index Per Article: 2.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/16/2013] [Revised: 01/23/2014] [Accepted: 02/09/2014] [Indexed: 11/28/2022]
Abstract
The alignment of a lower limb prosthesis affects the way load is transferred to the residual limb through the socket, and this load is critically important for the comfort and function of the prosthesis. Both magnitude and duration of the moment are important factors that may affect the residual limb health. Moment impulse is a well-accepted measurement that incorporates both factors via moment-time integrals. The aim of this study was to investigate the effect of alignment changes on the socket reaction moment impulse in transtibial prostheses. Ten amputees with transtibial prostheses participated in this study. The socket reaction moment impulse was measured at a self-selected walking speed using a Smart Pyramid in 25 alignment conditions, including a nominal alignment (clinically aligned by a prosthetist), as well as angle malalignments of 2°, 4° and 6° (abduction, adduction, extension and flexion) and translation malalignments of 5 mm, 10 mm and 15 mm (lateral, medial, anterior and posterior). The socket reaction moment impulse of the nominal alignment was compared for each condition. The relationship between the alignment and the socket reaction moment impulse was clearly observed in the coronal angle, coronal translation and sagittal translation alignment changes. However, this relationship was not evident in the sagittal angle alignment changes. The results of this study suggested that the socket reaction moment impulse could potentially serve as a valuable parameter to assist the alignment tuning process for transtibial prostheses. Further study is needed to investigate the influence of the socket reaction moment impulse on the residual limb health.
Collapse
Affiliation(s)
| | | | - Adam K Arabian
- Department of Engineering and Computer Science, Seattle Pacific University, WA, USA
| | | | - David A Boone
- Orthocare Innovations, Mountlake Terrace, WA 98043-2180, USA
| |
Collapse
|
28
|
Kobayashi T, Arabian AK, Orendurff MS, Rosenbaum-Chou TG, Boone DA. Effect of alignment changes on socket reaction moments while walking in transtibial prostheses with energy storage and return feet. Clin Biomech (Bristol, Avon) 2014; 29:47-56. [PMID: 24315709 PMCID: PMC3951460 DOI: 10.1016/j.clinbiomech.2013.11.005] [Citation(s) in RCA: 29] [Impact Index Per Article: 2.9] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Submit a Manuscript] [Subscribe] [Scholar Register] [Received: 06/06/2013] [Revised: 09/26/2013] [Accepted: 11/05/2013] [Indexed: 02/07/2023]
Abstract
BACKGROUND Energy storage and return feet are designed for active amputees. However, little is known about the socket reaction moments in transtibial prostheses with energy storage and return feet. The aim of this study was to investigate the effect of alignment changes on the socket reaction moments during gait while using the energy storage and return feet. METHODS A Smart Pyramid™ was used to measure the socket reaction moments in 10 subjects with transtibial prostheses while walking under 25 alignment conditions, including a nominal alignment (as defined by conventional clinical methods), as well as angle malalignments of 2°, 4° and 6° (flexion, extension, abduction, and adduction) and translation malalignments of 5mm, 10mm and 15mm (anterior, posterior, lateral, and medial) referenced from the nominal alignment. The socket reaction moments of the nominal alignment were compared with each malalignment. FINDINGS Both coronal and sagittal alignment changes demonstrated systematic effects on the socket reaction moments. In the sagittal plane, angle and translation alignment changes demonstrated significant differences (P<0.05) in the minimum moment, the moment at 45% of stance and the maximum moment for some comparisons. In the coronal plane, angle and translation alignment changes demonstrated significant differences (P<0.05) in the moment at 30% and 75% of stance for all comparisons. INTERPRETATION The alignment may have systematic effects on the socket reaction moments in transtibial prostheses with energy storage and return feet. The socket reaction moments could potentially be a useful biomechanical parameter to evaluate the alignment of the transtibial prostheses.
Collapse
Affiliation(s)
- Toshiki Kobayashi
- Orthocare Innovations, Mountlake Terrace, WA, USA
,Corresponding Author: Toshiki Kobayashi PhD, Orthocare Innovations, 6405 218th St. SW, Suite 301 Mountlake Terrace, WA 98043-2180, USA; Tel: +1 800.672.1710; Fax: +1 206.219.1144;
| | - Adam K. Arabian
- Department of Engineering and Computer Science, Seattle Pacific University, WA, USA
| | | | | | | |
Collapse
|
29
|
Pereles BD, DeRouin AJ, Ong KG. A wireless, passive magnetoelastic force-mapping system for biomedical applications. J Biomech Eng 2013; 136:011010. [PMID: 24190576 DOI: 10.1115/1.4025880] [Citation(s) in RCA: 6] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/23/2013] [Indexed: 11/08/2022]
Abstract
A wireless, passive force–mapping system based on changes in magnetic permeability of soft, amorphous Metglas 2826MB strips is presented for long-term force/stress monitoring on biomedical devices. The presented technology is demonstrated for use in lower-limb prosthetics to ensure proper postoperative fitting by providing real-time monitoring of the force distribution at the body-prosthesis interface. The sensor system consisted of a force-sensitive magnetoelastic sensing strip array that monitored applied loading as an observed change in the peak amplitude of the measured magnetic higher-order harmonic signal of each array element. The change in higher-order harmonic signal is caused by the change in the magnetic permeability of the sensing strips that corresponds to an increase in strip magnetization. After loading, the measured higher-order harmonic signals were fed into an algorithm to determine the applied forces, allowing for determination of the real-time loading profile at the body prosthesis interface.
Collapse
|
30
|
Kobayashi T, Orendurff MS, Boone DA. Effect of alignment changes on socket reaction moments during gait in transfemoral and knee-disarticulation prostheses: case series. J Biomech 2013; 46:2539-45. [PMID: 23931961 DOI: 10.1016/j.jbiomech.2013.07.012] [Citation(s) in RCA: 17] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/28/2013] [Revised: 07/10/2013] [Accepted: 07/10/2013] [Indexed: 10/26/2022]
Abstract
The alignment of a lower-limb prosthesis is critical to the successful prosthetic fitting and utilization by the wearer. Loads generated by the socket applied to the residual limb while walking are thought to be different in transfemoral and knee-disarticulation prostheses. The aim of this case series was to compare the socket reaction moments between transfemoral and knee-disarticulation prostheses and to investigate the effect of alignment changes on them. Two amputees, one with a transfemoral prosthesis and another with a knee-disarticulation prosthesis, participated in this study. A Smart Pyramid™ was used to measure socket reaction moments while walking under 9 selected alignment conditions; including nominally aligned, angle malalignments of 6° (flexion, extension, abduction and adduction) and translation malalignments of 15 mm (anterior, posterior, medial and lateral) of the socket relative to the foot. This study found that the pattern of the socket reaction moments was similar between transfemoral and knee-disarticulation prostheses. An extension moment in the sagittal plane and a varus moment in the coronal plane were dominant during stance under the nominally aligned condition. This study also demonstrated that alignment changes might have consistent effects on the socket reaction moments in transfemoral and knee-disarticulation prostheses. Extension and posterior translation of the socket resulted in increases in an extension moment, while abduction and lateral translation of the socket resulted in increases in a varus moment. The socket reaction moments may potentially serve as useful biomechanical parameters to evaluate alignment in transfemoral and knee-disarticulation prostheses.
Collapse
|
31
|
Albert MV, McCarthy C, Valentin J, Herrmann M, Kording K, Jayaraman A. Monitoring functional capability of individuals with lower limb amputations using mobile phones. PLoS One 2013; 8:e65340. [PMID: 23750254 PMCID: PMC3672103 DOI: 10.1371/journal.pone.0065340] [Citation(s) in RCA: 23] [Impact Index Per Article: 2.1] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/22/2012] [Accepted: 04/24/2013] [Indexed: 11/25/2022] Open
Abstract
To be effective, a prescribed prosthetic device must match the functional requirements and capabilities of each patient. These capabilities are usually assessed by a clinician and reported by the Medicare K-level designation of mobility. However, it is not clear how the K-level designation objectively relates to the use of prostheses outside of a clinical environment. Here, we quantify participant activity using mobile phones and relate activity measured during real world activity to the assigned K-levels. We observe a correlation between K-level and the proportion of moderate to high activity over the course of a week. This relationship suggests that accelerometry-based technologies such as mobile phones can be used to evaluate real world activity for mobility assessment. Quantifying everyday activity promises to improve assessment of real world prosthesis use, leading to a better matching of prostheses to individuals and enabling better evaluations of future prosthetic devices.
Collapse
Affiliation(s)
- Mark V Albert
- Sensory Motor Performance Program, Rehabilitation Institute of Chicago, Chicago, Illinois, USA.
| | | | | | | | | | | |
Collapse
|
32
|
Boone DA, Kobayashi T, Chou TG, Arabian AK, Coleman KL, Orendurff MS, Zhang M. Influence of malalignment on socket reaction moments during gait in amputees with transtibial prostheses. Gait Posture 2013. [PMID: 23177920 DOI: 10.1016/j.gaitpost.2012.10.002] [Citation(s) in RCA: 52] [Impact Index Per Article: 4.7] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Submit a Manuscript] [Subscribe] [Scholar Register] [Indexed: 02/02/2023]
Abstract
Alignment - the process and measured orientation of the prosthetic socket relative to the foot - is important for proper function of a transtibial prosthesis. Prosthetic alignment is performed by prosthetists using visual gait observation and amputees' feedback. The aim of this study was to investigate the effect of transtibial prosthesis malalignment on the moments measured at the base of the socket: the socket reaction moments. Eleven subjects with transtibial amputation were recruited from the community. An instrumented prosthesis alignment component was used to measure socket reaction moments during ambulation under 17 alignment conditions, including nominally aligned using conventional clinical methods, and angle perturbations of 3° and 6° (flexion, extension, abduction, and adduction) and translation perturbations of 5mm and 10mm (anterior, posterior, lateral, and medial) referenced from the nominal alignment. Coronal alignment perturbations caused systematic changes in the coronal socket reaction moments. All angle and translation perturbations revealed statistically significant differences on coronal socket reaction moments compared to the nominal alignment at 30% and 75% of stance phase (P<0.05). The effect of sagittal alignment perturbations on sagittal socket reaction moments was not as responsive as that of the coronal perturbations. The sagittal angle and translation perturbations of the socket led to statistically significant changes in minimum moment, maximum moment, and moments at 45% of stance phase in the sagittal plane. Therefore, malalignment affected the socket reaction moments in amputees with transtibial prostheses.
Collapse
Affiliation(s)
- David A Boone
- Orthocare Innovations, Mountlake Terrace, WA 98043-2180, USA.
| | | | | | | | | | | | | |
Collapse
|
33
|
Kobayashi T, Orendurff MS, Zhang M, Boone DA. Effect of alignment changes on sagittal and coronal socket reaction moment interactions in transtibial prostheses. J Biomech 2013; 46:1343-50. [PMID: 23499228 DOI: 10.1016/j.jbiomech.2013.01.026] [Citation(s) in RCA: 26] [Impact Index Per Article: 2.4] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/07/2012] [Revised: 01/22/2013] [Accepted: 01/22/2013] [Indexed: 11/16/2022]
Abstract
Alignment is important for comfortable and stable gait of lower-limb prosthesis users. The magnitude of socket reaction moments in the multiple planes acting simultaneously upon the residual limb may be related to perception of comfort in individuals using prostheses through socket interface pressures. The aim of this study was to investigate the effect of prosthetic alignment changes on sagittal and coronal socket reaction moment interactions (moment-moment curves) and to characterize the curves in 11 individuals with transtibial amputation using novel moment-moment interaction parameters measured by plotting sagittal socket reaction moments versus coronal ones under various alignment conditions. A custom instrumented prosthesis alignment component was used to measure socket reaction moments during walking. Prosthetic alignment was tuned to a nominally aligned condition by a prosthetist, and from this position, angular (3° and 6° of flexion, extension, abduction or adduction of the socket) and translational (5mm and 10mm of anterior, posterior, medial or lateral translation of the socket) alignment changes were performed in either the sagittal or the coronal plane in a randomized manner. A total of 17 alignment conditions were tested. Coronal angulation and translation alignment changes demonstrated similar consistent changes in the moment-moment curves. Sagittal alignment changes demonstrated more complex changes compared to the coronal alignment changes. Effect of sagittal angulations and translations on the moment-moment curves was different during 2nd rocker (mid-stance) with extension malalignment appearing to cause medio-lateral instability. Presentation of coronal and sagittal socket reaction moment interactions may provide useful visual information for prosthetists to understand the biomechanical effects of malalignment of transtibial prostheses.
Collapse
|
34
|
Schwarze M, Hurschler C, Seehaus F, Oehler S, Welke B. Loads on the prosthesis-socket interface of above-knee amputees during normal gait: validation of a multi-body simulation. J Biomech 2013; 46:1201-6. [PMID: 23473441 DOI: 10.1016/j.jbiomech.2013.02.005] [Citation(s) in RCA: 19] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/01/2012] [Revised: 02/01/2013] [Accepted: 02/05/2013] [Indexed: 11/26/2022]
Abstract
The treatment of above-knee amputees with a prosthesis based on a socket is currently considered the standard clinical treatment. Nevertheless there are few investigations on mechanical loading conditions on these devices under realistic circumstances. Further insight in this matter might improve the design of sockets for everyday application. The presented study investigates the loads acting on the socket-interface with a multi-body simulation (MBS). Aim of this study is to validate the quality of the applied MBS next to a direct measurement device. Therefore a custom strain gauge based force-moment sensor is integrated into the conventional socket-based prosthesis of six above-knee amputees. Each subject performs level-walking with kinematic and kinetic data being recorded in a gait laboratory. The data of the marker trajectories is processed in an inverse dynamics MBS where loads at the location of the sensor are determined. The comparison of both methods shows a good agreement of forces and moments and the simulation can be considered fully validated. RMSD is 4.7%BW for the forces and 27.0%BWM for the moments. The model will be used in further research to determine loads on the socket-prosthesis interface of above-knee amputees especially in high risk situations such as falling scenarios, where direct measurement with amputees is not possible for ethical reasons.
Collapse
Affiliation(s)
- Michael Schwarze
- Laboratory for Biomechanics and Biomaterials, Department of Orthopedics, Hannover Medical School, Anna-von-Borries-Str. 1-7, 30625 Hannover, Germany.
| | | | | | | | | |
Collapse
|
35
|
Regression Estimates of Pressure on Transtibial Residual Limbs Using Load Cell Measurements of the Forces and Moments Occurring at the Base of the Socket. ACTA ACUST UNITED AC 2013. [DOI: 10.1097/jpo.0b013e31827b360c] [Citation(s) in RCA: 14] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/25/2022]
|
36
|
Use of a Load Cell and Force-Moment Analysis to Examine Transtibial Prosthesis Foot Rollover Kinetics for Anterior-Posterior Alignment Perturbations. ACTA ACUST UNITED AC 2012. [DOI: 10.1097/jpo.0b013e31826f66f0] [Citation(s) in RCA: 16] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/26/2022]
|
37
|
Kobayashi T, Orendurff MS, Zhang M, Boone DA. Effect of transtibial prosthesis alignment changes on out-of-plane socket reaction moments during walking in amputees. J Biomech 2012; 45:2603-9. [PMID: 22975295 DOI: 10.1016/j.jbiomech.2012.08.014] [Citation(s) in RCA: 19] [Impact Index Per Article: 1.6] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/18/2012] [Revised: 06/30/2012] [Accepted: 08/02/2012] [Indexed: 10/27/2022]
Abstract
Alignment of lower limb prostheses is important for the gait of amputees. Observed deviations in a particular plane are corrected by altering the prosthetic alignment of the same plane. The assumption is that observed deviations are due to alignment errors within the same plane, but no research has confirmed this assumption. Therefore, the aim of this study was to investigate the out-of-plane effect of systematic alignment changes on socket reaction moments measured by an instrumented prosthesis alignment component in the sagittal and coronal planes in eleven amputees with transtibial prostheses. Each subject walked at self-selected walking speed following randomized controlled angular (±3° and ±6°) and translational (±5 mm and ±10 mm) alignment changes from the nominally aligned condition. The following socket reaction moment parameters were subsequently analyzed: 3 parameters (maximum moment, minimum moment, moment at 45% of stance phase) in the sagittal plane and 2 parameters (moment at 30% and 75% of stance phase) in the coronal plane. A statistical comparison was performed between the nominally aligned and mal-aligned conditions using a repeated measures of ANOVA followed by Scheffe's post-hoc tests. Significant differences were found between the nominally aligned (-0.077±0.078 Nm/kg) and 3° extension (-0.033±0.075 Nm/kg; P=0.0258) and 6° extension (-0.029±0.071 Nm/kg; P=0.0098) conditions in the coronal plane socket reaction moments measured at 30% of stance. Our analysis suggests that the alignment of the transtibial prosthesis should be performed in the sagittal plane first followed by the coronal plane.
Collapse
|
38
|
Neumann ES, Yalamanchili K, Brink J, Lee JS. Transducer-based comparisons of the prosthetic feet used by transtibial amputees for different walking activities: a pilot study. Prosthet Orthot Int 2012; 36:203-16. [PMID: 22344316 DOI: 10.1177/0309364612436408] [Citation(s) in RCA: 20] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Submit a Manuscript] [Subscribe] [Scholar Register] [Indexed: 02/03/2023]
Abstract
BACKGROUND Knowledge of transtibial residual limb force and moment loading during gait can be clinically useful. The research question was whether a transducer attached between the socket and pylon can be used to detect differences in loading patterns created by prosthetic feet of different design and different walking activities in real-world environments outside the gait lab. OBJECTIVES To develop methods for obtaining, processing, analyzing and interpreting transducer measurements and examining their clinical usefulness. STUDY DESIGN Case series design. METHODS A convenience sample of four K3-K4 transtibial amputees and a wireless tri-axial transducer mounted distal to the socket. Activities included self-selected comfortable speed walking, and ascending and descending ramps and steps. Measurements taken about three orthogonal axes were processed to produce plots of normalized resultant force versus normalized resultant moment. Within-subject differences in peak resultant forces and moments were tested. RESULTS Loading patterns between feet and subjects and among the activities were distinctly different. Optimal loading of peak resultant forces tentatively might occur around 25% and 69% to73% of stance during self-selected comfortable walking. Ascending and descending ramps is useful for examining heel and forefoot response. CONCLUSIONS Force-moment plots obtained from transducer data may assist clinical decision making. CLINICAL RELEVANCE A pylon-mounted transducer distal to the socket reveals the moments and forces transmitted to the residual limb and can be used to evaluate the loading patterns on the residual limb associated with different foot designs and different everyday activities outside the gait lab.
Collapse
|
39
|
Frossard L, Cheze L, Dumas R. Dynamic input to determine hip joint moments, power and work on the prosthetic limb of transfemoral amputees: ground reaction vs knee reaction. Prosthet Orthot Int 2011; 35:140-9. [PMID: 21697197 DOI: 10.1177/0309364611409002] [Citation(s) in RCA: 30] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Submit a Manuscript] [Subscribe] [Scholar Register] [Indexed: 02/03/2023]
Abstract
BACKGROUND Calculation of lower limb kinetics is limited by floor-mounted force-plates. OBJECTIVES Comparison of hip joint moments, power and mechanical work on the prosthetic limb of a transfemoral amputee calculated by inverse dynamics using either the ground reactions (force-plates) or knee reactions (transducer). STUDY DESIGN Comparative analysis. METHODS Kinematics, ground reaction and knee reaction data were collected using a motion analysis system, two force-plates, and a multi-axial transducer mounted below the socket, respectively. RESULTS The inverse dynamics using ground reaction underestimated the peaks of hip energy generation and absorption occurring at 63% and 76% of the gait cycle (GC) by 28% and 54%, respectively. This method also overestimated by 24% a phase of negative work at the hip (37%-56% GC), and underestimated the phases of positive (57%-72% GC) and negative (73%-98%GC) work at the hip by 11% and 58%, respectively. CONCLUSIONS A transducer mounted within the prosthesis has the capacity to provide more realistic kinetics of the prosthetic limb because it enables assessment of multiple consecutive steps and a wide range of activities without the issue of foot placement on force-plates. CLINICAL RELEVANCE The hip is the only joint an amputee controls directly to set the prosthesis in motion. Hip joint kinetics are associated with joint degeneration, low back pain, risk of falls, etc. Therefore, realistic assessment of hip kinetics over multiple gait cycles and a wide range of activities is essential.
Collapse
Affiliation(s)
- Laurent Frossard
- Group of Research on Adapted Physical Activities, University of Quebec, Montreal, Canada.
| | | | | |
Collapse
|
40
|
Thompson ML, Backman D, Branemark R, Mechefske CK. Evaluating the Bending Response of Two Osseointegrated Transfemoral Implant Systems Using 3D Digital Image Correlation. J Biomech Eng 2011; 133:051006. [DOI: 10.1115/1.4003871] [Citation(s) in RCA: 7] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/08/2022]
Abstract
Osseointegrated transfemoral implants have been introduced as a prosthetic solution for above knee amputees. They have shown great promise, providing an alternative for individuals who could not be accommodated by conventional, socket-based prostheses; however, the occurrence of device failures is of concern. In an effort to improve the strength and longevity of the device, a new design has been proposed. This study investigates the mechanical behavior of the new taper-based assembly in comparison to the current hex-based connection for osseointegrated transfemoral implant systems. This was done to better understand the behavior of components under loading, in order to optimize the assembly specifications and improve the useful life of the system. Digital image correlation was used to measure surface strains on two assemblies during static loading in bending. This provided a means to measure deformation over the entire sample and identify critical locations as the assembly was subjected to a series of loading conditions. It provided a means to determine the effects of tightening specifications and connection geometry on the material response and mechanical behavior of the assemblies. Both osseoinegrated assemblies exhibited improved strength and mechanical performance when tightened to a level beyond the current specified tightening torque of 12 N m. This was shown by decreased strain concentration values and improved distribution of tensile strain. Increased tightening torque provides an improved connection between components regardless of design, leading to increased torque retention, decreased peak tensile strain values, and a more gradual, primarily compressive distribution of strains throughout the assembly.
Collapse
Affiliation(s)
- Melanie L. Thompson
- Department of Mechanical and Materials Engineering, Queen’s University, McLaughlin Hall, Kingston, ON, K7L 3N6, Canada
| | - David Backman
- Institute for Aerospace Research, National Research Council Canada, 1200 Montreal Road, Building M-14, Ottawa, ON, K1A 0R6, Canada
| | - Rickard Branemark
- Centre of Orthopaedic Osseointegration Sahlgrenska University Hospital, Per Dubbsgatan 15, 413 45 Gothenburg, Sweden
| | - Chris K. Mechefske
- Department of Mechanical and Materials Engineering, Queen’s University, McLaughlin Hall, Kingston, ON, K7L 3N6, Canada
| |
Collapse
|
41
|
Frossard L, Stevenson N, Sullivan J, Uden M, Pearcy M. Categorization of Activities of Daily Living of Lower Limb Amputees During Short-Term Use of a Portable Kinetic Recording System: A Preliminary Study. ACTA ACUST UNITED AC 2011. [DOI: 10.1097/jpo.0b013e318207914c] [Citation(s) in RCA: 26] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/25/2022]
|
42
|
Frossard LA. Load on osseointegrated fixation of a transfemoral amputee during a fall: Determination of the time and duration of descent. Prosthet Orthot Int 2010; 34:472-87. [PMID: 20961183 DOI: 10.3109/03093646.2010.520057] [Citation(s) in RCA: 22] [Impact Index Per Article: 1.6] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Submit a Manuscript] [Subscribe] [Scholar Register] [Indexed: 02/03/2023]
Abstract
Mitigation of fall-related injuries for populations of transfemoral amputees fitted with a socket or an osseointegrated fixation is challenging. Wearing a protective device fitted within the prosthesis might be a possible solution, provided that issues with automated fall detection and time of deployment of the protective mechanism are solved. The first objective of this study was to give some examples of the times and durations of descent during a real forward fall of a transfemoral amputee that occurred inadvertently while attending a gait measurement session to assess the load applied on the residuum. The second objective was to present five semi-automated methods of detection of the time of descent using the load data. The load was measured directly at 200 Hz using a six-channel transducer. The average time and duration of descent were 242 ± 42 ms (145-310 ms) and 619 ± 42 ms (550-715 ms), respectively. This study demonstrated that the transition between walking and falling was characterized by times of descent that occurred sequentially. The sensitivity and specificity of an automated algorithm might be improved by combining several methods of detection based on the deviation of the loads measured from their own trends and from a template previously established.
Collapse
Affiliation(s)
- Laurent Alain Frossard
- Département de Kinanthropologie, Université du Québec à Montréal, Montréal, Quebec, Canada.
| |
Collapse
|
43
|
Frossard LA, Tranberg R, Haggstrom E, Pearcy M, Brånemark R. Load on osseointegrated fixation of a transfemoral amputee during a fall: loading, descent, impact and recovery analysis. Prosthet Orthot Int 2010; 34:85-97. [PMID: 20196690 DOI: 10.3109/03093640903585024] [Citation(s) in RCA: 48] [Impact Index Per Article: 3.4] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Submit a Manuscript] [Subscribe] [Scholar Register] [Indexed: 02/03/2023]
Abstract
Falling represents a health risk for lower limb amputees fitted with an osseointegrated fixation mainly because of the potential damage to the fixation. The purpose of this study was to characterize a real forward fall that occurred inadvertently to a transfemoral amputee fitted with an osseointegrated fixation while attending a gait measurement session to assess the load applied on the residuum. The objective was to analyze the load applied on the fixation with an emphasis on the sequence of events, the pattern and the magnitude of the forces and moments. The load was measured directly at 200 Hz using a six-channel transducer. Complementary video footage was also studied. The fall was divided into four phases: Loading (240 ms), descent (620 ms), impact (365 ms) and recovery (2495 ms). The main impact forces and moments occurred 870 ms and 915 ms after the heel contact, and corresponded to 133% BW and 17 % BWm, or 1.2 and 11.2 times the maximum forces and moments applied during the previous steps of the participant, respectively. This study provided key information to engineers and clinicians facing the challenge to design equipment, and rehabilitation and exercise programs to restore safely the locomotion of lower limb amputees.
Collapse
Affiliation(s)
- Laurent Alain Frossard
- Centre for Health Innovation and Solutions, The University of Queensland, Herston, Australia.
| | | | | | | | | |
Collapse
|
44
|
Frossard L, Gow DL, Hagberg K, Cairns N, Contoyannis B, Gray S, Brånemark R, Pearcy M. Apparatus for monitoring load bearing rehabilitation exercises of a transfemoral amputee fitted with an osseointegrated fixation: a proof-of-concept study. Gait Posture 2010; 31:223-8. [PMID: 19926285 DOI: 10.1016/j.gaitpost.2009.10.010] [Citation(s) in RCA: 29] [Impact Index Per Article: 2.1] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Submit a Manuscript] [Subscribe] [Scholar Register] [Received: 03/30/2009] [Revised: 10/06/2009] [Accepted: 10/20/2009] [Indexed: 02/02/2023]
Abstract
The purpose of this proof-of-concept study was to determine the relevance of direct measurements to monitor the load applied on the osseointegrated fixation of transfemoral amputees during static load bearing exercises. The objectives were (A) to introduce an apparatus using a three-dimensional load transducer, (B) to present a range of derived information relevant to clinicians, (C) to report on the outcomes of a pilot study and (D) to compare the measurements from the transducer with those from the current method using a weighing scale. One transfemoral amputee fitted with an osseointegrated implant was asked to apply 10 kg, 20 kg, 40 kg and 80 kg on the fixation, using self-monitoring with the weighing scale. The loading was directly measured with a portable kinetic system including a six-channel transducer, external interface circuitry and a laptop. As the load prescribed increased from 10 kg to 80 kg, the forces and moments applied on and around the antero-posterior axis increased by four-fold anteriorly and 14-fold medially, respectively. The forces and moments applied on and around the medio-lateral axis increased by nine-fold laterally and 16-fold from anterior to posterior, respectively. The long axis of the fixation was overloaded and underloaded in 17% and 83% of the trials, respectively, by up to + or - 10%. This proof-of-concept study presents an apparatus that can be used by clinicians facing the challenge of improving basic knowledge on osseointegration, for the design of equipment for load bearing exercises and for rehabilitation programs.
Collapse
Affiliation(s)
- Laurent Frossard
- School of Engineering Systems, Queensland University of Technology, Brisbane, Australia.
| | | | | | | | | | | | | | | |
Collapse
|
45
|
Functional Outcome of Transfemoral Amputees Fitted With an Osseointegrated Fixation: Temporal Gait Characteristics. ACTA ACUST UNITED AC 2010. [DOI: 10.1097/jpo.0b013e3181ccc53d] [Citation(s) in RCA: 30] [Impact Index Per Article: 2.1] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/20/2022]
|
46
|
Dumas R, Cheze L, Frossard L. Loading applied on prosthetic knee of transfemoral amputee: comparison of inverse dynamics and direct measurements. Gait Posture 2009; 30:560-2. [PMID: 19709886 DOI: 10.1016/j.gaitpost.2009.07.126] [Citation(s) in RCA: 53] [Impact Index Per Article: 3.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Submit a Manuscript] [Subscribe] [Scholar Register] [Received: 04/21/2009] [Revised: 06/24/2009] [Accepted: 07/27/2009] [Indexed: 02/02/2023]
Abstract
Inverse dynamics is the most comprehensive method that gives access to the net joint forces and moments during walking. However it is based on assumptions (i.e., rigid segments linked by ideal joints) and it is known to be sensitive to the input data (e.g., kinematic derivatives, positions of joint centres and centre of pressure, inertial parameters). Alternatively, transducers can be used to measure directly the load applied on the residuum of transfemoral amputees. So, the purpose of this study was to compare the forces and moments applied on a prosthetic knee measured directly with the ones calculated by three inverse dynamics computations--corresponding to 3 and 2 segments, and "ground reaction vector technique"--during the gait of one patient. The maximum RMSEs between the estimated and directly measured forces (i.e., 56 N) and moment (i.e., 5 N m) were relatively small. However the dynamic outcomes of the prosthetic components (i.e., absorption of the foot, friction and limit stop of the knee) were only partially assessed with inverse dynamic methods.
Collapse
Affiliation(s)
- R Dumas
- Université de Lyon, F-69622, Lyon, France.
| | | | | |
Collapse
|
47
|
Risk of failure during gait for direct skeletal attachment of a femoral prosthesis: A finite element study. Med Eng Phys 2009; 31:595-600. [DOI: 10.1016/j.medengphy.2008.11.015] [Citation(s) in RCA: 44] [Impact Index Per Article: 2.9] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/08/2008] [Revised: 10/10/2008] [Accepted: 11/21/2008] [Indexed: 11/18/2022]
|
48
|
Frossard L, Hagberg K, Haggstrom E, Branemark R. Load-relief of walking AIDS on osseointegrated fixation: instrument for evidence-based practice. IEEE Trans Neural Syst Rehabil Eng 2009; 17:9-14. [PMID: 19211318 DOI: 10.1109/tnsre.2008.2010478] [Citation(s) in RCA: 31] [Impact Index Per Article: 2.1] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/07/2022]
Abstract
Clinicians are currently in demand of tools enabling individual assessment during their daily practice of load-relief of walking aids. The first aim of this article is to describe a portable kinetic system that could be used to measure directly the true load applied on the residuum during assisted walking. The second aim is to present the information that can be derived from the raw loading data. The third aim is to provide an example for a participant. One active transfemoral amputee fitted with an osseointegrated fixation was asked to walk in straight level line with no aid, one stick, one and two elbow crutches on a 20 m walkway. The load-relief was measured using a six-channel transducer and recorded using a data logger. The overall loading was decreased by 2% using one stick, 5% using one crutch and by 10% using two crutches. This study presents a method that can be used by clinicians facing the challenge of prescribing and assessing walking aids to restore the locomotion of lower limb amputees in the framework of an evidence-based practice.
Collapse
Affiliation(s)
- Laurent Frossard
- School of Engineering Systems and Institute of Health and Biomedical Innovation, Queensland University of Technology, Brisbane, Australia
| | | | | | | |
Collapse
|
49
|
Lee WCC, Doocey JM, Brånemark R, Adam CJ, Evans JH, Pearcy MJ, Frossard LA. FE stress analysis of the interface between the bone and an osseointegrated implant for amputees--implications to refine the rehabilitation program. Clin Biomech (Bristol, Avon) 2008; 23:1243-50. [PMID: 18809231 DOI: 10.1016/j.clinbiomech.2008.06.012] [Citation(s) in RCA: 38] [Impact Index Per Article: 2.4] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Submit a Manuscript] [Subscribe] [Scholar Register] [Received: 01/07/2008] [Revised: 06/24/2008] [Accepted: 06/24/2008] [Indexed: 02/07/2023]
Abstract
BACKGROUND The direct anchorage of lower-limb prosthesis to the bone has been shown to be an excellent alternative for amputees experiencing complications in using a conventional prosthetic socket. During rehabilitation phase, amputees are asked to apply static loading on the abutment perpendicular to a weigh scale to prepare the bone to tolerate the forces likely to be developed during walking. The weigh scale measures only the vertical force. A different loading protocol can affect the bone-implant interface stresses and the outcome of the rehabilitation. METHODS This study developed a Finite Element model to study the stresses in the bone adjacent to the implant. Three loading conditions were applied based on the experimentally measured load: (1) vertical force applied along the long axis of the limb, corresponding to the load clinically prescribed in the weight bearing exercise; (2) loads applied on the three axes, corresponding to the "true" load measured simultaneously by a tri-axial load transducer during the same exercise; and (3) loads experienced during independent walking. FINDINGS The model revealed that the weigh scale might in fact be applying much higher and less uniform stresses on the bone than expected. During walking, high stress occurred at various locations of the implanted region, which was different from the patterns of stress distribution during weight bearing exercises. INTERPRETATIONS The difference in stress among three loading conditions implies that tri-axial load should be monitored during the weight bearing exercises and carefully prescribed.
Collapse
Affiliation(s)
- Winson C C Lee
- School of Engineering Systems, Queensland University of Technology, Brisbane, Australia.
| | | | | | | | | | | | | |
Collapse
|
50
|
Fan RE, Culjat MO, King CH, Franco ML, Boryk R, Bisley JW, Dutson E, Grundfest WS. A haptic feedback system for lower-limb prostheses. IEEE Trans Neural Syst Rehabil Eng 2008; 16:270-7. [PMID: 18586606 DOI: 10.1109/tnsre.2008.920075] [Citation(s) in RCA: 46] [Impact Index Per Article: 2.9] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/08/2022]
Abstract
A haptic feedback system has been developed to provide sensory information to patients with lower-limb prostheses or peripheral neuropathy. Piezoresistive force sensors were mounted against four critical contact points of the foot to collect and relay force information to a system controller, which in turn drives four corresponding pneumatically controlled balloon actuators. The silicone-based balloon actuators were mounted on a cuff worn on the middle thigh, with skin contacts on the posterior, anterior, medial, and lateral surfaces of the thigh. Actuator characterization and human perceptual testing were performed to determine the effectiveness of the system in providing tactile stimuli. The actuators were determined to have a monotonic input pressure-vertical deflection response. Six normal subjects wearing the actuator cuff were able to differentiate inflation patterns, directional stimuli and discriminate between three force levels with 99.0%, 94.8%, and 94.4% accuracy, respectively. With force sensors attached to a shoe insole worn by an operator, subjects were able to correctly indicate the movements of the operator with 95.8% accuracy. These results suggest that the pneumatic haptic feedback system design is a viable method to provide sensory feedback for the lower limbs.
Collapse
Affiliation(s)
- Richard E Fan
- Biomedical Engineering Department, University of California, Los Angeles, CA 90095, USA.
| | | | | | | | | | | | | | | |
Collapse
|