Amyloid fibril formation by A beta 16-22, a seven-residue fragment of the Alzheimer's beta-amyloid peptide, and structural characterization by solid state NMR

Protein Denaturation and Aggregation: Cellular Responses to Denatured and Aggregated Proteins

Protein aggregation is a prominent feature of many neurodegenerative diseases, such as Alzheimer's, Huntington's, and Parkinson's diseases, as well as spongiform encephalopathies and systemic amyloidoses. These diseases are sometimes called protein misfolding diseases, but the latter term begs the question of what is the "folded" state of proteins for which normal structure and function are unknown. Amyloid consists of linear, unbranched protein or peptide fibrils of approximately 100 A diameter. These fibrils are composed of a wide variety of proteins that have no sequence homology, and no similarity in three-dimensional structures--and yet, as fibrils, they share a common secondary structure, the beta-sheet. Because of the prominence of amyloid deposits in many of these diseases, much effort has gone into elucidation of fibril structure. Recent advances in solid-state NMR spectroscopy and other biophysical techniques have led to the partial elucidation of fibril structure. Surprisingly at the time, for beta-amyloid, a set of 39-43-amino-acid peptides believed to play a pathogenic role in Alzheimer's disease, the beta-sheets are parallel with all amino acids of the sheets in-register. Since the time of those observations, however, it has become clear that there is no universal structure for amyloid fibrils. While many of the amyloid fibrils described thus far have a parallel beta-sheet structure, some have antiparallel beta-sheets, and other, more subtle structural differences among amyloids exist as well. Amyloids demonstrate conformational plasticity, the ability to adopt more than one stable tertiary fold. Conformational plasticity could account for "strain" differences in prions, and for the fact that a single polypeptide can form different fibril types with conformational differences at the atomic level. More recent data now indicate that the fibrils may not be the most potent or proximate mediators of cyto- and neurotoxicity. This damage is not confined to cell death, but also includes more subtle forms of damage, such as disruption of synaptic plasticity in the central nervous system. Rather than fibrils, prefibrillar aggregates, variously called "micelles," "protofibrils," or ADDLs (beta-amyloid-derived diffusible ligands in the case of beta-amyloid) may be the more proximate mediators of cell damage. These are soluble oligomers of aggregating peptides or proteins, but their structure is very challenging to study, because they are generally difficult to obtain in large enough quantities for high-resolution structural techniques, and they are temporally unstable, rapidly changing into more mature, and eventually fibrillar forms. Consequently, the mechanisms by which they disrupt cellular function are also not well understood. Nevertheless, three broad, overlapping, nonexclusive sets of mechanisms have been proposed as responsible for the cellular damage caused by soluble, oligomeric protein aggregates. These are: (1) disruption of cell membranes and their functions [e.g., by inserting into membranes and disrupting normal ion gradients]; (2) inactivation of normally folded, functional proteins [e.g., by sequestering or localizing transcription factors to the wrong cellular compartment]; and (3) "gumming up the works," by binding to and inactivating components of the quality-control system of cells, such as the proteasome or chaperone proteins.

Secondary structure of alpha-synuclein oligomers: characterization by raman and atomic force microscopy

Formation of alpha-synuclein aggregates is proposed to be a crucial event in the pathogenesis of Parkinson's disease. Large soluble oligomeric species are observed as probable intermediates during fibril formation and these, or related aggregates, may constitute the toxic element that triggers neurodegeneration. Unfortunately, there is a paucity of information regarding the structure and composition of these oligomers. Here, the morphology and the conformational characteristics of the oligomers and filaments are investigated by a combined atomic force microscopy (AFM) and Raman microscopic approach on a common mica surface. AFM showed that in vitro early stage oligomers were globular with variable heights, while prolonged incubation caused the oligomers to become elongated as protofilaments. The height of the subsequently formed alpha-synuclein filaments was similar to that of the protofilaments. Analysis of the Raman amide I band profiles of the different alpha-synuclein oligomers establishes that the spheroidal oligomers contain a significant amount of alpha-helical secondary structure (47%), which decreases to about 37% in protofilaments. At the same time, when protofilaments form, beta-sheet structure increases to about 54% from the approximately 29% observed in spheroidal oligomers. Upon filament formation, the major conformation is beta-sheet (66%), confirmed by narrowing of the amide I band and the profile maximum shifting to 1667 cm(-1). The accumulation of spheroidal oligomers of increasing size but unchanged vibrational spectra during the fibrillization process suggests that a cooperative conformational change may contribute to the kinetic control of fibrillization.

Quantitative determination of the topological propensities of amyloidogenic peptides

One of the interesting puzzles of amyloid beta-peptide of Alzheimer's disease (Abeta) is that it appears to polymerize into amyloid fibrils in a parallel beta sheet topology, while smaller subsets of the peptide produce anti-parallel beta sheets. In order to target potential weak points of amyloid fibrils in a rational drug design effort, it would be helpful to understand the forces that drive this change. We have designed two peptides CHQKLVFFAEDYNGKDEAFFVLKQHW and CHQKLVFFAEDYNGKHQKLVFFAEDW that join the significant amyloidogenic Abeta (14-23) sequence HQKLVFFAED in parallel and anti-parallel topologies, respectively. (Here, the word "parallel" refers only to residue sequence and not backbone topology). The N-termini of the hairpins were labeled with the fluorescent dye 5-((((2-iodoacetyl)amino)ethyl)amino)naphthalene-1-sulfonic acid (IAEDANS), forming a fluorescence energy transfer donor-acceptor pair with the C-terminus tryptophan. Circular dichroism results show that the anti-parallel hairpin adopts a beta-sheet conformation, while the parallel hairpin is disordered. Fluorescent Resonance Energy Transfer (FRET) results show that the distance between the donor and the acceptor is significantly shorter in the anti-parallel topology than in the parallel topology. The fluorescence intensity of anti-parallel hairpin also displays a linear concentration dependence, indicating that the FRET observed in the anti-parallel hairpin is from intra-molecular interactions. The results thus provide a quantitative estimate of the relative topological propensities of amyloidogenic peptides. Our FRET and CD results show that beta sheets involving the essential Abeta (14-23) fragment, strongly prefer the anti-parallel topology. Moreover, we provide a quantitative estimate of the relative preference for these two topologies. Such analysis can be repeated for larger subsets of Abeta to determine quantitatively the relative degree of preference for parallel/anti-parallel topologies in given fragments of Abeta.

Exploring the early steps of amyloid peptide aggregation by computers

The assembly of normally soluble proteins into amyloid fibrils is a hallmark of neurodegenerative diseases. Because protein aggregation is very complex, involving a variety of oligomeric metastable intermediates, the detailed aggregation paths and structural characterization of the intermediates remain to be determined. Yet, there is strong evidence that these oligomers, which form early in the process of fibrillogenesis, are cytotoxic. In this paper, we review our current understanding of the underlying factors that promote the aggregation of peptides into amyloid fibrils. We focus here on the structural and dynamic aspects of the aggregation as observed in state-of-the-art computer simulations of amyloid-forming peptides with an emphasis on the activation-relaxation technique.

Seeding-dependent propagation and maturation of amyloid fibril conformation

Recent studies of amyloid fibrils have focused on the presence of multiple amyloid forms even with one protein and their propagation by seeding, leading to conformational memory. To establish the structural basis of these critical features of amyloid fibrils, we used the amyloidogenic fragment Ser20-Lys41 (K3) of beta2-microglobulin, a protein responsible for dialysis-related amyloidosis. In 20% (v/v) 2,2,2-trifluoroethanol and 10 mM HCl (pH approximately 2), K3 peptide formed two types of amyloid-like fibrils, f218 and f210, differing in the amount of beta-sheet as measured by circular dichroism spectroscopy and Fourier transform infrared spectroscopy. Atomic force microscopy showed that the fibril with a larger amount of beta-sheet (f210) is thinner and longer. Both fibrils were reproduced by seeding, showing the template-dependent propagation of a fibril's conformation. However, upon repeated self-seeding, f218 fibrils were gradually transformed into f210 fibrils, revealing the conformational maturation. The observed maturation can be explained fully by a competitive propagation of two fibrils. The maturation of amyloid fibrils might play a role during the development of amyloidosis.

Structure and properties of alpha-synuclein and other amyloids determined at the amino acid level

The structure of alpha-synuclein (alpha-syn) amyloid was studied by hydrogen-deuterium exchange by using a fragment separation-MS analysis. The conditions used made it possible to distinguish the exchange of unprotected and protected amide hydrogens and to define the order/disorder boundaries at close to amino acid resolution. The soluble alpha-syn monomer exchanges its amide hydrogens with water hydrogens at random coil rates, consistent with its natively unstructured condition. In assembled amyloid, long N-terminal and C-terminal segments remain unprotected (residues 1- approximately 38 and 102-140), although the N-terminal segment shows some heterogeneity. A continuous middle segment (residues approximately 39-101) is strongly protected by systematically H-bonded cross-beta structure. This segment is much too long to fit the amyloid ribbon width, but non-H-bonded amides expected for direction-changing loops are not apparent. These results and other known constraints specify that alpha-syn amyloid adopts a chain fold like that suggested before for amyloid-beta [Petkova et al. (2002) Proc. Natl. Acad Sci. USA 99, 16742-16747] but with a short, H-bonded interlamina turn. More generally, we suggest that the prevalence of accidental amyloid formation derives mainly from the exceptional ability of the main chain in a structurally relaxed beta-conformation to adapt to and energy-minimize side-chain mismatching. Seeding specificity, strain variability, and species barriers then arise because newly added parallel in-register chains must faithfully reproduce the same set of adaptations.

Prediction of "hot spots" of aggregation in disease-linked polypeptides

Background

The polypeptides involved in amyloidogenesis may be globular proteins with a defined 3D-structure or natively unfolded proteins. The first class includes polypeptides such as β2-microglobulin, lysozyme, transthyretin or the prion protein, whereas β-amyloid peptide, amylin or α-synuclein all belong to the second class. Recent studies suggest that specific regions in the proteins act as "hot spots" driving aggregation. This should be especially relevant for natively unfolded proteins or unfolded states of globular proteins as they lack significant secondary and tertiary structure and specific intra-chain interactions that can mask these aggregation-prone regions. Prediction of such sequence stretches is important since they are potential therapeutic targets.

Results

In this study we exploited the experimental data obtained in an in vivo system using β-amyloid peptide as a model to derive the individual aggregation propensities of natural amino acids. These data are used to generate aggregation profiles for different disease-related polypeptides. The approach detects the presence of "hot spots" which have been already validated experimentally in the literature and provides insights into the effect of disease-linked mutations in these polypeptides.

Conclusion

The proposed method might become a useful tool for the future development of sequence-targeted anti-aggregation pharmaceuticals.

Intersheet rearrangement of polypeptides during nucleation of {beta}-sheet aggregates

Many neurodegenerative diseases are characterized by the accumulation of amyloid fibers in the brain, which can occur when a protein misfolds into an extended beta-sheet conformation. The nucleation of these beta-sheet aggregates is of particular interest, not only because it is the rate-determining step toward fiber formation but also because early, soluble aggregate species may be the cytotoxic entities in many diseases. In the case of the prion peptide H1 (residues 109-122 of the prion protein) stable amyloid fibers form only after the beta-strands of the peptide have adopted their equilibrium antiparallel beta-sheet configuration with residue 117 in register across all strands. In this article, we present the kinetic details of the realignment of these beta-strands from their fastformed nonequilibrium structure, which has no regular register of the strands, into the more ordered beta-sheets capable of aggregating into stable fibers. This process is likely the nucleating step toward the formation of stable fibers. Isotope-edited IR spectroscopy is used to monitor the alignment of the beta-strands by the introduction of a (13)C-labeled carbonyl at residue 117. Nonexponential kinetics is observed, with a complex dependence on concentration. The results are consistent with a mechanism in which the beta-sheet realigns by both the repeated detachment and annealing of strands in solution and reptation of polypeptide strands within an aggregate.

The Alzheimer beta-peptide shows temperature-dependent transitions between left-handed 3-helix, beta-strand and random coil secondary structures

The temperature-induced structural transitions of the full length Alzheimer amyloid beta-peptide [A(beta)(1-40) peptide] and fragments of it were studied using CD and 1H NMR spectroscopy. The full length peptide undergoes an overall transition from a state with a prominent population of left-handed 3(1) (polyproline II; PII)-helix at 0 degrees C to a random coil state at 60 degrees C, with an average DeltaH of 6.8 +/- 1.4 kJ.mol(-1) per residue, obtained by fitting a Zimm-Bragg model to the CD data. The transition is noncooperative for the shortest N-terminal fragment A(beta)(1-9) and weakly cooperative for A(beta)(1-40) and the longer fragments. By analysing the temperature-dependent 3J(HNH(alpha)) couplings and hydrodynamic radii obtained by NMR for A(beta)(1-9) and A(beta)(12-28), we found that the structure transition includes more than two states. The N-terminal hydrophilic A(beta)(1-9) populates PII-like conformations at 0 degrees C, then when the temperature increases, conformations with dihedral angles moving towards beta-strand at 20 degrees C, and approaches random coil at 60 degrees C. The residues in the central hydrophobic (18-28) segment show varying behaviour, but there is a significant contribution of beta-strand-like conformations at all temperatures below 20 degrees C. The C-terminal (29-40) segment was not studied by NMR, but from CD difference spectra we concluded that it is mainly in a random coil conformation at all studied temperatures. These results on structural preferences and transitions of the segments in the monomeric form of A(beta) may be related to the processes leading to the aggregation and formation of fibrils in the Alzheimer plaques.

Molecular dynamics simulations of Alzheimer's beta-amyloid protofilaments

Filamentous amyloid aggregates are central to the pathology of Alzheimer's disease. We use all-atom molecular dynamics (MD) simulations with explicit solvent and multiple force fields to probe the structural stability and the conformational dynamics of several models of Alzheimer's beta-amyloid fibril structures, for both wild-type and mutated amino acid sequences. The structural models are based on recent solid state NMR data. In these models, the peptides form in-register parallel beta-sheets along the fibril axis, with dimers of two U-shaped peptides located in layers normal to the fibril axis. Four different topologies are explored for stacking the beta-strand regions against each other to form a hydrophobic core. Our MD results suggest that all four NMR-based models are structurally stable, and we find good agreement with dihedral angles estimated from solid-state NMR experiments. Asp23 and Lys28 form buried salt-bridges, resulting in an alternating arrangement of the negatively and positively charged residues along the fibril axis that is reminiscent of a one-dimensional ionic crystal. Interior water molecules are solvating the buried salt-bridges. Based on data from NMR measurements and MD simulations of short amyloid fibrils, we constructed structural models of long fibrils. Calculated X-ray fiber diffraction patterns show the characteristics of packed beta-sheets seen in experiments, and suggest new experiments that could discriminate between various fibril topologies.

Primary sequence independence for prion formation

Many proteins can adopt self-propagating beta-sheet-rich structures, termed amyloid fibrils. The [URE3] and [PSI+] prions of Saccharomyces cerevisiae are infectious amyloid forms of the proteins Ure2p and Sup35p, respectively. Ure2p forms prions primarily as a result of its sequence composition, as versions of Ure2p with the prion domain amino acids shuffled are still able to form prions. Here we show that prion induction by both Ure2p and Ure2-21p, one of the scrambled versions of Ure2p, is clearly dependent on the length of the inducing fragment. For Ure2-21p, no single sequence is found in all of the inducing fragments, highlighting the sequence independence of prion formation. Furthermore, the sequence of the Sup35p prion domain can also be randomized without blocking prion formation. Indeed, a single shuffled sequence could give rise to several prion variants. These results suggest that [PSI+] formation is driven primarily by the amino acid composition of the Sup35p prion domain, and that the Sup35p oligopeptide repeats are not required for prion maintenance.

Parallel beta-sheets and polar zippers in amyloid fibrils formed by residues 10-39 of the yeast prion protein Ure2p

We report the results of solid-state nuclear magnetic resonance (NMR) and atomic force microscopy measurements on amyloid fibrils formed by residues 10-39 of the yeast prion protein Ure2p (Ure2p(10)(-)(39)). Measurements of intermolecular (13)C-(13)C nuclear magnetic dipole-dipole couplings indicate that Ure2p(10)(-)(39) fibrils contain in-register parallel beta-sheets. Measurements of intermolecular (15)N-(13)C dipole-dipole couplings, using a new solid-state NMR technique called DSQ-REDOR, are consistent with hydrogen bonds between side chain amide groups of Gln18 residues. Such side chain hydrogen bonding interactions have been called "polar zippers" by M. F. Perutz and have been proposed to stabilize amyloid fibrils formed by peptides with glutamine- and asparagine-rich sequences, such as Ure2p(10)(-)(39). We propose that polar zipper interactions account for the in-register parallel beta-sheet structure in Ure2p(10)(-)(39) fibrils and that similar peptides will also exhibit parallel beta-sheet structures in amyloid fibrils. We present molecular models for Ure2p(10)(-)(39) fibrils that are consistent with available experimental data. Finally, we show that solid-state (13)C NMR chemical shifts for (13)C-labeled Ure2p(10)(-)(39) fibrils are insensitive to hydration level, indicating that the fibril structure is not affected by the presence or absence of bulk water.

Prediction of "aggregation-prone" and "aggregation-susceptible" regions in proteins associated with neurodegenerative diseases

Increasing evidence indicates that many peptides and proteins can be converted in vitro into highly organised amyloid structures, provided that the appropriate experimental conditions can be found. In this work, we define intrinsic propensities for the aggregation of individual amino acids and develop a method for identifying the regions of the sequence of an unfolded peptide or protein that are most important for promoting amyloid formation. This method is applied to the study of three polypeptides associated with neurodegenerative diseases, Abeta42, alpha-synuclein and tau. In order to validate the approach, we compare the regions of proteins that are predicted to be most important in driving aggregation, either intrinsically or as the result of mutations, with those determined experimentally. The knowledge of the location and the type of the "sensitive regions" for aggregation is important both for rationalising the effects of sequence changes on the aggregation of polypeptide chains and for the development of targeted strategies to combat diseases associated with amyloid formation.

The parallel superpleated beta-structure as a model for amyloid fibrils of human amylin

Human amylin is a 37 amino acid residue peptide hormone whose fibrillogenesis has been correlated with type 2 diabetes. These fibrils are rope-like bundles of several 5nm diameter protofilaments. Here, we propose, as a model for the protofilament, a variant of the parallel superpleated beta-structure previously derived for amyloid filaments of the yeast prion Ure2p. In the amylin model, individual polypeptides from residues 9 to 37 have a planar S-shaped fold with three beta-strands. These serpentines are stacked in register, with a 0.47 nm axial rise and a small rotational twist per step, generating an array of three parallel beta-sheets in cross-beta conformation. The interior, the two "bays" sandwiched between adjacent sheets, are occupied by non-polar and by polar/uncharged residues that are predicted to form H-bonded ladders, similar to those found in beta-helical proteins. The N-terminal peptide containing a disulfide bond occupies an extraneous peripheral position in the protofilament. The left-handed twist of the beta-sheets is shown to underlie left-handed coiling of amylin protofilaments in fibrils. The model is consistent with current biophysical, biochemical and genetic data and, in particular, affords a plausible explanation for why rodent amylin does not form fibrils.

Theory of heteronuclear decoupling in solid-state nuclear magnetic resonance using multipole-multimode Floquet theory

A formal theory for heteronuclear decoupling in solid-state magic angle spinning (MAS) nuclear magnetic resonance experiments is presented as a first application of multipole-multimode Floquet theory. The method permits a straightforward construction of the multispin basis and describes the spin dynamics via effective Floquet Hamiltonians obtained using the van Vleck transformation method in the Floquet-Liouville space. As a test case, we consider a model three-spin system (I2S) under asynchronous time modulations (both MAS and rf irradiation) and derive effective Hamiltonians for describing the spin dynamics in the Floquet-Liouville space during heteronuclear decoupling. Furthermore, we describe and evaluate the origin of cross terms between the various anisotropic interactions and illustrate their exact contributions to the spin dynamics. The theory presented herein should be applicable to the design and understanding of pulse sequences for heteronuclear and homonuclear recoupling and decoupling.

Expression and purification of a recombinant peptide from the Alzheimer's beta-amyloid protein for solid-state NMR

Fibrillar protein aggregates contribute to the pathology of a number of disease states. To facilitate structural studies of these amyloid fibrils by solid-state NMR, efficient methods for the production of milligram quantities of isotopically labeled peptide are necessary. Bacterial expression of recombinant amyloid proteins and peptides allows uniform isotopic labeling, as well as other patterns of isotope incorporation. However, large-scale production of recombinant amyloidogenic peptides has proven particularly difficult, due to their inherent propensity for aggregation and the associated toxicity of fibrillar material. Yields of recombinant protein are further reduced by the small molecular weights of short amyloidogenic fragments. Here, we report high-yield expression and purification of a peptide comprising residues 11-26 of the Alzheimer's beta-amyloid protein (Abeta(11-26)), with homoserine lactone replacing serine at residue 26. Expression in inclusion bodies as a ketosteroid isomerase fusion protein and subsequent purification under denaturing conditions allows production of milligram quantities of uniformly labeled (13)C- and (15)N-labeled peptide, which forms amyloid fibrils suitable for solid-state NMR spectroscopy. Initial structural data obtained by atomic force microscopy, electron microscopy, and solid-state NMR measurements of Abeta(11-26) fibrils are also presented.

Pathway complexity of Alzheimer's beta-amyloid Abeta16-22 peptide assembly

Recent studies suggest that both soluble oligomers and insoluble fibrils have toxic effects in cell cultures, raising the interest in determining the first steps of the assembly process. We have determined the aggregation mechanisms of Abeta(16-22) dimer using the activation-relaxation technique and an approximate free energy model. Consistent with the NMR solid-state analysis, the dimer is predicted to prefer an antiparallel beta sheet structure with the expected registry of intermolecular hydrogen bonds. The simulations, however, locate three other antiparallel minima with nonnative beta sheet registries and one parallel beta sheet structure, slightly destabilized with respect to the ground state. This result is significant because it can explain the observed dependency of beta sheet registry on pH conditions. We also find that assembly of Abeta(16-22) into dimers follows multiple routes, but alpha-helical intermediates are not obligatory. This indicates that destabilization of alpha-helical intermediates is unlikely to abolish oligomerization of Abeta peptides.

Hydrolysis of the amyloid beta-peptide (A beta) 1-40 between Asp23-Val24 produces non-aggregating fragments. An electrospray mass spectrometric study

The aggregation of full-length (residues 1-40) amyloid beta-peptide (A beta) and fragments corresponding to residues 1-23 and 24-40 was studied by electrospray mass spectrometry, using gramicidin as a non-aggregating reference. Following a lag period, A beta(1-40) at 140 microM concentration aggregates with apparent first-order kinetics. Under acidic conditions A beta(1-40) undergoes spontaneous cleavage between Asp23-Val24 and to a lesser extent also at two other Asp-X motifs. Incubation in acidic H(2)18O showed incorporation of 18O in fragment A beta(1-23), confirming that the Asp23-Val24 peptide bond had been hydrolyzed. Incubation of synthetic A beta(1-23) and A beta(24-40) peptides with A beta(1-40) showed that A beta(24-40) remained in solution for several months, that A beta(1-23) partly disappeared from solution, whereas A beta(1-40) completely disappeared. Further, treatment of sedimentable aggregates formed after co-incubation of the three peptides with hexafluoro-2-propanol or formic acid recovered the intensity of A beta(1-40). These data support previous studies showing that the region of A beta encompassing residues 16-24 is necessary for aggregation into amyloid fibrils.

Amyloid-β aggregates formed at polar-nonpolar interfaces differ from amyloid-β protofibrils produced in aqueous buffers

The deposition of aggregated amyloid-beta (Abeta) peptides in the brain as senile plaques is a pathological hallmark of Alzheimer's disease (AD). Several lines of evidence indicate that fibrillar and, in particular, soluble aggregates of these 40- and 42-residue peptides are important in the etiology of AD. Recent studies also stress that amyloid aggregates are polymorphic and that a single polypeptide can fold into multiple amyloid conformations. Here we review our recent reports that Abeta(1-40) in vitro can form soluble aggregates with predominant beta-structures that differ in stability and morphology. One class of aggregates involved soluble Abeta protofibrils, prepared by vigorous overnight agitation of monomeric Abeta(1-40) in low ionic strength buffers. These aggregates were quite stable and disaggregated to only a limited extent on dilution. A second class of soluble Abeta aggregates was generated at polar-nonpolar interfaces. Aggregation in a two-phase system of buffer over chloroform occurred more rapidly than in buffer alone. In buffered 2% hexafluoroisopropanol (HFIP), microdroplets of HFIP were formed and the half-time for aggregation was less than 10 minutes. Like Abeta protofibrils, these interfacial aggregates showed increased thioflavin T fluorescence and were rich in beta-structure by circular dichroism. However, electron microscopy and atomic force microscopy revealed very different morphologies. The HFIP aggregates formed initial globular clusters that progressed over several days to soluble fibrous aggregates. When diluted out of HFIP these aggregates initially were very unstable and disaggregated completely within 2 minutes. However, their stability increased as they progressed to fibers. It is important to determine whether similar interfacial Abeta aggregates are produced in vivo.

Lattice models of peptide aggregation: Evaluation of conformational search algorithms

We present a series of conformational search calculations on the aggregation of short peptide fragments that form fibrils similar to those seen in many protein mis-folding diseases. The proteins were represented by a face-centered cubic lattice model with the conformational energies calculated using the Miyazawa-Jernigan potential. The searches were performed using algorithms based on the Metropolis Monte Carlo method, including simulated annealing and replica exchange. We also present the results of searches using the tabu search method, an algorithm that has been used for many optimization problems, but has rarely been used in protein conformational searches. The replica exchange algorithm consistently found more stable structures then the other algorithms, and was particularly effective for the octamers and larger systems.

Characterization of paired helical filaments by scanning transmission electron microscopy

Paired helical filaments (PHFs) are abnormal twisted filaments composed of hyperphosphorylated tau protein. They are found in Alzheimer's disease and other neurodegenerative disorders designated as tauopathies. They are a major component of intracellular inclusions known as neurofibrillary tangles (NFTs). The objective of this review is to summarize various structural studies of PHFs in which using scanning transmission electron microscopy (STEM) has been particularly informative. STEM provides shape and mass per unit length measurements important for studying ultrastructural aspects of filaments. These include quantitative comparisons between dispersed and aggregated populations of PHFs as well as comparative studies of PHFs in Alzheimer's disease and other neurodegenerative disorders. Other approaches are also discussed if relevant or complementary to studies using STEM, e.g., application of a novel staining reagent, Nanovan. Our understanding of the PHF structure and the development of PHFs into NFTs is presented from a historical perspective. Others goals are to describe the biochemical and ultrastructural complexity of authentic PHFs, to assess similarities between authentic and synthetic PHFs, and to discuss recent advances in PHF modeling.

Amyloid-β Protofibrils Differ from Amyloid-β Aggregates Induced in Dilute Hexafluoroisopropanol in Stability and Morphology

The brains of Alzheimer's disease (AD) patients contain large numbers of amyloid plaques that are rich in fibrils composed of 40- and 42-residue amyloid-beta (Abeta) peptides. Several lines of evidence indicate that fibrillar Abeta and especially soluble Abeta aggregates are important in the etiology of AD. Recent reports also stress that amyloid aggregates are polymorphic and that a single polypeptide can fold into multiple amyloid conformations. Here we demonstrate that Abeta-(1-40) can form soluble aggregates with predominant beta-structures that differ in stability and morphology. One class of aggregates involved soluble Abeta protofibrils, prepared by vigorous overnight agitation of monomeric Abeta-(1-40) at low ionic strength. Dilution of these aggregation reactions induced disaggregation to monomers as measured by size exclusion chromatography. Protofibril concentrations monitored by thioflavin T fluorescence decreased in at least two kinetic phases, with initial disaggregation (rate constant approximately 1 h(-1)) followed by a much slower secondary phase. Incubation of the reactions without agitation resulted in less disaggregation at slower rates, indicating that the protofibrils became progressively more stable over time. In fact, protofibrils isolated by size exclusion chromatography were completely stable and gave no disaggregation. A second class of soluble Abeta aggregates was generated rapidly (<10 min) in buffered 2% hexafluoroisopropanol (HFIP). These aggregates showed increased thioflavin T fluorescence and were rich in beta-structure by circular dichroism. Electron microscopy and atomic force microscopy revealed initial globular clusters that progressed over several days to soluble fibrous aggregates. When diluted out of HFIP, these aggregates initially were very unstable and disaggregated completely within 2 min. However, their stability increased as they progressed to fibers. Relative to Abeta protofibrils, the HFIP-induced aggregates seeded elongation by Abeta monomer deposition very poorly. The techniques used to distinguish these two classes of soluble Abeta aggregates may be useful in characterizing Abeta aggregates formed in vivo.

Alzheimer's Disease Aβ Peptide Fragment 10–30 Forms a Spectrum of Metastable Oligomers with Marked Preference for N to N and C to C Monomer Termini Proximity

Oligomers of Abeta peptide have been indicated recently as a possible main causative agent of Alzheimer's disease. However, information concerning their structural properties is very limited. Here Abeta oligomers are studied by non-covalent complexes mass spectrometry and disulfide rearrangement. As a model molecule, an Abeta fragment spanning residues 10-30 (Abeta10-30) has been used. This model peptide is known to contain the core region responsible for Abeta aggregation to fibrils. Non-covalent complexes mass spectrometry indicates that, at neutral pH, monomers are accompanied by oligomers up to hexamers of gradually decreasing population. H-2H exchange studies and direct monomer exchange rate measurements with the use of 15N labeled peptides and mass spectrometry show a fast exchange of monomeric units between oligomers. Disulfide exchange studies of cysteine tagged Abeta10-30 and its mutant show proximity of N-N and C-C termini of monomers in oligomers. The presented data underscore a dynamic character for pre-nucleation forms of Abeta, however, with a marked tendency for parallel strand orientation in oligomers.

In silico assembly of Alzheimer's Abeta16-22 peptide into beta-sheets

Recent studies suggest that soluble oligomers of amyloid-forming peptides have toxic effects in cell cultures. In this study, the folding of three Alzheimer's A beta(16-22) peptides have been simulated with the activation-relaxation technique and a generic energy model. Starting from randomly chosen states, the predicted lowest energy structure superposes within 1 A rms deviation from its conformation within the fibrils. This antiparallel structure is found to be in equilibrium with several out-of-register antiparallel beta-sheets and mixed parallel-antiparallel beta-sheets, indicating that full structural order in the fibrils requires larger aggregates. Folding involves the formation of dimers followed by the addition of a monomer and proceeds through a generalized mechanism between disordered and native alignments of beta-strands.

Aromatic interactions in peptides: Impact on structure and function

Aromatic interactions, including pi-pi, cation-pi, aryl-sulfur, and carbohydrate-pi interactions, have been shown to be prevalent in proteins through protein structure analysis, suggesting that they are important contributors to protein structure. However, the magnitude and significance of aromatic interactions is not defined by such studies. Investigation of aromatic interactions in the context of structured peptides has complemented studies of protein structure and has provided a wealth of information regarding the role of aromatic interactions in protein structure and function. Recent advances in this area are reviewed.

Aqueous urea solution destabilizes Abeta(16-22) oligomers

We use long multiple trajectories generated by molecular dynamics simulations to probe the stability of oligomers of Abeta(16-22) (KLVFFAE) peptides in aqueous urea solution. High concentration of urea promotes the formation of beta-strand structures in Abeta(16-22) monomers, whereas in water they adopt largely compact random coil structures. The tripeptide system, which forms stable antiparallel beta-sheet structure in water, is destabilized in urea solution. The enhancement of beta-strand content in the monomers and the disruption of oligomeric structure occur largely by direct interaction of urea with the peptide backbone. Our simulations suggest that the oligomer unbinding dynamics is determined by two opposing effects, namely, by the increased propensity of monomers to form beta-strands and the rapid disruption of the oligomers. The qualitative conclusions are affirmed by using two urea models. Because the proposed destabilization mechanism depends largely on hydrogen bond formation between urea and the peptide backbone, we predict that high urea concentration will destabilize oligomers of other amyloidogenic peptides as well.

Oligomerization of amyloid Abeta16-22 peptides using hydrogen bonds and hydrophobicity forces

The 16-22 amino-acid fragment of the beta-amyloid peptide associated with the Alzheimer's disease, Abeta, is capable of forming amyloid fibrils. Here we study the aggregation mechanism of Abeta16-22 peptides by unbiased thermodynamic simulations at the atomic level for systems of one, three, and six Abeta16-22 peptides. We find that the isolated Abeta16-22 peptide is mainly a random coil in the sense that both the alpha-helix and beta-strand contents are low, whereas the three- and six-chain systems form aggregated structures with a high beta-sheet content. Furthermore, in agreement with experiments on Abeta16-22 fibrils, we find that large parallel beta-sheets are unlikely to form. For the six-chain system, the aggregated structures can have many different shapes, but certain particularly stable shapes can be identified.

Sampling the self-assembly pathways of KFFE hexamers

The formation of amyloid fibrils is often encountered in Alzheimer's disease, type II diabetes, and transmissible spongiform encephalopathies. In the last few years, however, mounting evidence has suggested that the soluble oligomers of amyloid-forming peptides are also cytotoxic agents. Understanding the early pathway steps of amyloid self-assembly at atomic detail might therefore be crucial for the development of specific inhibitors to prevent amyloidosis in humans. Using the activation-relaxation technique and a generic energy model, we study in detail the aggregation of a hexamer of KFFE peptide. Our simulations show that a monomer remains disordered, but that six monomers placed randomly in an open box self-associate to adopt, with various orientations, three possible distant low-energy structures. Two of these structures show a double-layer beta-sheet organization, in agreement with the structure of amyloid fibrils as observed by x-ray diffraction, whereas the third one consists of a barrel-like curved single-layer hexamer. Based on these results, we propose a bidirectional growth mode of amyloid fibril, involving alternate lateral and longitudinal growths.

Identifying structural features of fibrillar islet amyloid polypeptide using site-directed spin labeling

Pancreatic amyloid deposits, composed primarily of the 37-residue islet amyloid polypeptide (IAPP), are a characteristic feature found in more than 90% of patients with type II diabetes. Although IAPP amyloid deposits are associated with areas of pancreatic islet beta-cell dysfunction and depletion and are thought to play a role in disease, their structure is unknown. We used electron paramagnetic resonance spectroscopy to analyze eight spin-labeled derivatives of IAPP in an effort to determine structural features of the peptide. In solution, all eight derivatives gave rise to electron paramagnetic resonance spectra with sharp lines indicative of rapid motion on the sub-nanosecond time scale. These spectra are consistent with a rapidly tumbling and highly dynamic peptide. In contrast, spectra for the fibrillar form exhibit reduced mobility and the presence of strong intermolecular spin-spin interactions. The latter implies that the peptide subunits are ordered and that the same residues from neighboring peptides are in close proximity to one another. Our data are consistent with a parallel arrangement of IAPP peptides within the amyloid fibril. Analysis of spin label mobility indicates a high degree of order throughout the peptide, although the N-terminal region is slightly less ordered. Possible similarities with respect to the domain organization and parallelism of Alzheimer's amyloid beta peptide fibrils are discussed.

A structural model of polyglutamine determined from a host-guest method combining experiments and landscape theory

Modeling the structure of natively disordered peptides has proved difficult due to the lack of structural information on these peptides. In this work, we use a novel application of the host-guest method, combining folding theory with experiments, to model the structure of natively disordered polyglutamine peptides. Initially, a minimalist molecular model (C(alpha)C(beta)) of CI2 is developed with a structurally based potential and captures many of the folding properties of CI2 determined from experiments. Next, polyglutamine "guest" inserts of increasing length are introduced into the CI2 "host" model and the polyglutamine is modeled to match the resultant change in CI2 thermodynamic stability between simulations and experiments. The polyglutamine model that best mimics the experimental changes in CI2 thermodynamic stability has 1), a beta-strand dihedral preference and 2), an attractive energy between polyglutamine atoms 0.75-times the attractive energy between the CI2 host Go-contacts. When free-energy differences in the CI2 host-guest system are correctly modeled at varying lengths of polyglutamine guest inserts, the kinetic folding rates and structural perturbation of these CI2 insert mutants are also correctly captured in simulations without any additional parameter adjustment. In agreement with experiments, the residues showing structural perturbation are located in the immediate vicinity of the loop insert. The simulated polyglutamine loop insert predominantly adopts extended random coil conformations, a structural model consistent with low resolution experimental methods. The agreement between simulation and experimental CI2 folding rates, CI2 structural perturbation, and polyglutamine insert structure show that this host-guest method can select a physically realistic model for inserted polyglutamine. If other amyloid peptides can be inserted into stable protein hosts and the stabilities of these host-guest mutants determined, this novel host-guest method may prove useful to determine structural preferences of these intractable but biologically relevant protein fragments.

Kinetic control of dimer structure formation in amyloid fibrillogenesis

Amyloid fibril formation involves nonfibrillar oligomeric intermediates, which are important as possible cytotoxic species in neurodegenerative diseases. However, their transient nature and polydispersity have made it difficult to identify their formation mechanism or structure. We have investigated the dimerization process, the first step in aggregate formation, by multiple molecular dynamics simulations of five beta-sheet-forming peptides. Contrary to the regular beta-sheet structure of the amyloid fibril, the dimers exhibit all possible combinations of beta-sheets, with an overall preference for antiparallel arrangements. Through statistical analysis of 1,000 dimerization trajectories, each 1 ns in length, we have demonstrated that the observed distribution of dimer configurations is kinetically determined; hydrophobic interactions orient the peptides so as to minimize the solvent accessible surface area, and the dimer structures become trapped in energetically unfavorable conformations. Once the hydrophobic contacts are present, the backbone hydrogen bonds form rapidly by a zipper-like mechanism. The initial nonequilibrium structures formed are stable during the 1-ns simulation time for all five peptides at room temperature. In contrast, at higher temperatures, where rapid equilibration among different configurations occurs, the distribution follows the global energies. The relaxation time of dimers at room temperature was estimated to be longer than the time for diffusional encounters with other oligomers at typical concentrations. These results suggest that kinetic trapping could play a role in the structural evolution of early aggregates in amyloid fibrillogenesis.

Protein aggregation and neurodegenerative disease

Neurodegenerative diseases such as Alzheimer's disease (AD), Parkinson's disease (PD), Huntington's disease (HD), amyotrophic lateral sclerosis (ALS) and prion diseases are increasingly being realized to have common cellular and molecular mechanisms including protein aggregation and inclusion body formation. The aggregates usually consist of fibers containing misfolded protein with a beta-sheet conformation, termed amyloid. There is partial but not perfect overlap among the cells in which abnormal proteins are deposited and the cells that degenerate. The most likely explanation is that inclusions and other visible protein aggregates represent an end stage of a molecular cascade of several steps, and that earlier steps in the cascade may be more directly tied to pathogenesis than the inclusions themselves. For several diseases, genetic variants assist in explaining the pathogenesis of the more common sporadic forms and developing mouse and other models. There is now increased understanding of the pathways involved in protein aggregation, and some recent clues have emerged as to the molecular mechanisms of cellular toxicity. These are leading to approaches toward rational therapeutics.

Absolute structural constraints on amyloid fibrils from solid-state NMR spectroscopy of partially oriented samples

We demonstrate that absolute, molecular-level structural information can be obtained from solid-state NMR measurements on partially oriented amyloid fibrils. Specifically, we show that the direction of the fibril axis relative to a carbonyl 13C chemical shift anisotropy (CSA) tensor can be determined from magic-angle spinning (MAS) sideband patterns in 13C NMR spectra of fibrils deposited on planar substrates. Deposition of fibrils on a planar substrate creates a highly anisotropic distribution of fibril orientations (hence, CSA tensor orientations) with most fibrils lying in the substrate plane. The anisotropic orientational distribution gives rise to distorted spinning sideband patterns in MAS spectra from which the fibril axis direction can be inferred. The experimentally determined fibril axis direction relative to the carbonyl CSA tensor of Val12 in fibrils formed by the 40-residue beta-amyloid peptide associated with Alzheimer's disease (Abeta1-40) agrees well with the predictions of a recent structural model (Petkova et al. Proc. Natl. Acad. Sci. U.S.A. 2002, 99, 16742-16747) in which Val12 is contained in a parallel beta-sheet in the cross-beta motif characteristic of amyloid fibrils.

The Formation of Straight and Twisted Filaments from Short Tau Peptides

We studied fibril formation in a family of peptides based on PHF6 (VQIVYK), a short peptide segment found in the microtubule binding region of tau protein. N-Acetylated peptides AcVYK-amide (AcVYK), AcIVYK-amide (AcPHF4), AcQIVYK-amide (AcPHF5), and AcV-QIVYK-amide (AcPHF6) rapidly formed straight filaments in the presence of 0.15 m NaCl, each composed of two laterally aligned protofilaments approximately 5 nm in width. X-ray fiber diffraction showed the omnipresent sharp 4.7-A reflection indicating that the scattering objects are likely elongated along the hydrogen-bonding direction in a cross-beta conformation, and Fourier transform IR suggested the peptide chains were in a parallel (AcVYK, AcPHF6) or antiparallel (AcPHF4, AcPHF5) beta-sheet configuration. The dipeptide N-acetyl-YK-amide (AcYK) formed globular structures approximately 200 nm to 1 microm in diameter. The polymerization rate, as measured by thioflavin S binding, increased with the length of the peptide going from AcYK --> AcPHF6, and peptides that aggregated most rapidly displayed CD spectra consistent with beta-sheet structure. There was a 3-fold decrease in rate when Val was substituted for Ile or Gln, nearly a 10-fold decrease when Ala was substituted for Tyr, and an increase in polymerization rate when Glu was substituted for Lys. Twisted filaments, composed of four laterally aligned protofilaments (9-19 nm width, approximately 90 nm half-periodicity), were formed by mixing AcPHF6 with AcVYK. Taken together these results suggest that the core of PHF6 is localized at VYK, and the interaction between small amphiphilic segments of tau may initiate nucleation and lead to filaments displaying paired helical filament morphology.

A model for Ure2p prion filaments and other amyloids: the parallel superpleated beta-structure

In its prion form, Ure2p, a regulator of nitrogen catabolism in Saccharomyces cerevisiae, polymerizes into filaments whereby its C-terminal regulatory domain is inactivated but retains its native fold. The filament has an amyloid fibril backbone formed by the Asn-rich, N-terminal, "prion" domain. The prion domain is also capable of forming fibrils when alone or when fused to other proteins. We have developed a model for the fibril that we call a parallel superpleated beta-structure. In this model, the prion domain is divided into nine seven-residue segments, each with a four-residue strand and a three-residue turn, that zig-zag in a planar serpentine arrangement. Serpentines are stacked axially, in register, generating an array of parallel beta-sheets, with a small and potentially variable left-hand twist. The interior of the filament is mostly stabilized not by packing of apolar side chains but by H-bond networks generated by the stacking of Asn side chains: charged residues are excluded. The model is consistent with current biophysical, biochemical, and structural data (notably, mass-per-unit-length measurements by scanning transmission electron microscopy that gave one subunit rise per 0.47 nm) and is readily adaptable to other amyloids, for instance the core of Sup35p filaments and glutamine expansions in huntingtin.

Rotational resonance in uniformly 13C-labeled solids: effects on high-resolution magic-angle spinning NMR spectra and applications in structural studies of biomolecular systems

We describe investigations of the effects of rotational resonance (R(2)) on solid state (13)C NMR spectra of uniformly (13)C-labeled samples obtained under magic-angle spinning (MAS), and of the utility of R(2) measurements as structural probes of peptides and proteins with multiple uniformly labeled residues. We report results for uniformly (13)C-labeled L-alanine and L-valine in polycrystalline form, and for amyloid fibrils formed by the 15-residue peptide A beta(11-25) with uniform labeling of a four-residue segment. The MAS NMR spectra reveal a novel J-decoupling effect at R(2) conditions that may be useful in spectral assignments for systems with sharp (13)C MAS NMR lines. Pronounced dependences of the apparent isotropic (13)C NMR chemical shifts on MAS frequency near R(2) conditions are also observed. We demonstrate the feasibility of quantitative (13)C-(13)C distance determinations in L-valine, and qualitative determinations of inter-residue (13)C-(13)C contacts in A beta(11-25) fibrils. Finally, we demonstrate a "relayed" R(2) technique that may be useful in structural measurements on systems with poorly resolved (13)C MAS NMR lines.

Peptide Sequence and Amyloid Formation

We present a combined experimental and theoretical investigation of the tendencies to form amyloid fibrils by a hexapeptide derivative of the human islet amyloid polypeptide, the NFGAIL (22-27) fragment and its mutants. We performed a complete alanine scan of this fragment and studied the capability of the wild-type and its mutant analogs to form ordered fibrils by ultrastructural and biophysical analyses. In parallel, we conducted a meticulous characterization of each sequence-complex at an atomistic level by performing nine independent molecular dynamics simulations for a total of 36 ns. These allowed us to rationalize the experimental observations and to establish the role of every residue in the fibrillogenesis. The main factor that determines the formation of regular fibrils is a coherent organization of the intersheet space. In particular, phenylalanine side chains cement the macromolecular assemblies due to their aromatic chemical character and restricted conformational flexibility when interacting with aliphatic residues.

Mapping abeta amyloid fibril secondary structure using scanning proline mutagenesis

Although the amyloid fibrils formed from the Alzheimer's disease amyloid peptide Abeta are rich in cross-beta sheet, the peptide likely also exhibits turn and unstructured regions when it becomes incorporated into amyloid. We generated a series of single-proline replacement mutants of Abeta(1-40) and determined the thermodynamic stabilities of amyloid fibrils formed from these mutants to characterize the susceptibility of different residue positions of the Abeta sequence to proline substitution. The results suggest that the Abeta peptide, when engaged in the amyloid fibril, folds into a conformation containing three highly structured segments, consisting of contiguous sequence elements 15-21, 24-28, and 31-36, that are sensitive to proline replacement and likely to include the beta-sheet portions of the fibrils. Residues relatively insensitive to proline replacement fall into two groups: (a) residues 1-14 and 37-40 are likely to exist in relatively unstructured, flexible elements extruded from the beta-sheet-rich amyloid core; (b) residues 22, 23, 29 and 30 are likely to occupy turn positions between these three structured elements. Although destabilized, fibrils formed from Abeta(1-40) proline mutants are very similar in structure to wild-type fibrils, as indicated by hydrogen-deuterium exchange and other analysis. Interestingly, however, some proline mutations destabilize fibrils while at the same time increasing the number of amide protons protected from hydrogen exchange. This suggests that the stability of amyloid fibrils, rather than being driven exclusively by the formation of H-bonded beta-sheet, is achieved, as in globular proteins, through a balance of stabilizing and destabilizing forces. The proline scanning data are most compatible with a model for amyloid protofilament structure loosely resembling the parallel beta-helix folding motif, such that each Abeta(15-36) core region occupies a single layer of a prismatic, H-bonded stack of peptides.

Amyloidosis of Alzheimer's Abeta peptides: solid-state nuclear magnetic resonance, electron paramagnetic resonance, transmission electron microscopy, scanning transmission electron microscopy and atomic force microscopy studies

Aggregation cascade for Alzheimer's amyloid-beta peptides, its relevance to neurotoxicity in the course of Alzheimer's disease and experimental methods useful for these studies are discussed. Details of the solid-phase peptide synthesis and sample preparation procedures for Alzheimer's beta-amyloid fibrils are given. Recent progress in obtaining structural constraints on Abeta-fibrils from solid-state NMR and scanning transmission electron microscopy (STEM) data is discussed. Polymorphism of amyloid fibrils and oligomers of the 'Arctic' mutant of Abeta(1-40) was studied by (1)H,(13)C solid-state NMR, transmission electron microscopy (TEM) and atomic force microscopy (AFM), and a real-time aggregation of different polymorphs of the peptide was observed with the aid of in situ AFM. Recent results on binding of Cu(II) ions and Al-citrate and Al-ATP complexes to amyloid fibrils, as studied by electron paramagnetic resonance (EPR) and solid-state (27)Al NMR techniques, are also presented.

Progress towards a molecular-level structural understanding of amyloid fibrils

The problem of determining and understanding the molecular structures of amyloid fibrils has attracted considerable attention and effort over the past several years. Although complete, high-resolution structures have not yet been obtained, key features of protein and peptide conformations and supramolecular organization within amyloid fibrils have been elucidated using a variety of novel experimental methods, including magnetic resonance spectroscopies, electron microscopy, X-ray and neutron scattering, and biochemical techniques. The experimental data are beginning to shed light on issues such as the nature of the intermolecular interactions that stabilize amyloid structures, the molecular structural basis for polymorphism in amyloid fibrils, the universality of amyloid structures, and the balance between structural order and disorder within amyloid fibrils. Recent structural data will contribute to an improved understanding of the mechanisms of amyloid formation and to the development of therapeutic agents for amyloid diseases.

Solid state NMR reveals a pH-dependent antiparallel beta-sheet registry in fibrils formed by a beta-amyloid peptide

We report solid state nuclear magnetic resonance (NMR) measurements that probe the supramolecular organization of beta-sheets in the cross-beta motif of amyloid fibrils formed by residues 11-25 of the beta-amyloid peptide associated with Alzheimer's disease (Abeta(11-25)). Fibrils were prepared at pH 7.4 and pH 2.4. The solid state NMR data indicate that the central hydrophobic segment of Abeta(11-25) (sequence LVFFA) adopts a beta-strand conformation and participates in antiparallel beta-sheets at both pH values, but that the registry of intermolecular hydrogen bonds is pH-dependent. Moreover, both registries determined for Abeta(11-25) fibrils are different from the hydrogen bond registry in the antiparallel beta-sheets of Abeta(16-22) fibrils at pH 7.4 determined in earlier solid state NMR studies. In all three cases, the hydrogen bond registry is highly ordered, with no detectable "registry-shift" defects. These results suggest that the supramolecular organization of beta-sheets in amyloid fibrils is determined by a sensitive balance of multiple side-chain-side-chain interactions. Recent structural models for Abeta(11-25) fibrils based on X-ray fiber diffraction data are inconsistent with the solid state NMR data at both pH values.

Residues 17-20 and 30-35 of beta-amyloid play critical roles in aggregation

We examined the effects of co-incubating nine different Abeta peptide fragments with full-length Abeta1-40 (Abeta40) on protein aggregation. Six fragments enhanced aggregation of Abeta40 (Abeta1-28, 12-28, 17-28, 10-20, 25-35 and 17-40), while three others did not (Abeta1-11, 1-16, and 20-29). All of the peptides that enhanced aggregation contained either residues 17-20 or 30-35, indicating the importance of these regions for promoting aggregation of full-length Abeta. Abeta25-35 in particular increased both the rate and extent of aggregation of Abeta40 considerably as indicated by fluorescence staining. Atomic force microscope imaging (AFM) indicates the increase in fluorescence staining with Abeta25-35 is primarily due to increased formation of oligomers and protofibrils rather than formation of large amyloid fibrils. AFM images of Abeta25-35 when incubated alone also indicate formation of aggregates and long thin filaments. The increase in formation of the small toxic oligomeric morphology of Abeta40, along with formation of Abeta25-35 oligomers and thin filaments, represent two different potential pathways for Abeta25-35 toxicity. The critical roles of residues 17-20 and 30-35 of Abeta provide further insight into mechanism that underlie the formation of toxic aggregates in Alzheimer Disease (AD) and suggest targets for the design of beta-sheet breakers to modulate the aggregation and inhibit toxicity of full-length Abeta.

Increasing the amphiphilicity of an amyloidogenic peptide changes the beta-sheet structure in the fibrils from antiparallel to parallel

Solid-state NMR measurements have been reported for four peptides derived from beta-amyloid peptide Abeta(1-42): Abeta(1-40), Abeta(10-35), Abeta(16-22), and Abeta(34-42). Of these, the first two are predicted to be amphiphilic and were reported to form parallel beta-sheets, whereas the latter two peptides appear nonamphiphilic and adopt an antiparallel beta-sheet organization. These results suggest that amphiphilicity may be significant in determining fibril structure. Here, we demonstrate that acylation of Abeta(16-22) with octanoic acid increases its amphiphilicity and changes the organization of fibrillar beta-sheet from antiparallel to parallel. Electron microscopy, Congo Red binding, and one-dimensional 13C NMR measurements demonstrate that octanoyl-Abeta(16-22) forms typical amyloid fibrils. Based on the stability of monolayers at the air-water interface, octanoyl-Abeta(16-22) is more amphiphilic than Abeta(16-22). Measurements of 13C-13C and 15N-13C nuclear magnetic dipole-dipole couplings in isotopically labeled fibril samples, using the constant-time finite-pulse radiofrequency-driven recoupling (fpRFDR-CT) and rotational echo double resonance (REDOR) solid-state NMR techniques, demonstrate that octanoyl-Abeta(16-22) fibrils are composed of parallel beta-sheets, whereas Abeta(16-22) fibrils are composed of antiparallel beta-sheets. These data demonstrate that amphiphilicity is critical in determining the structural organization of beta-sheets in the amyloid fibril. This work also shows that all amyloid fibrils do not share a common supramolecular structure, and suggests a method for controlling the structure of amyloid fibrils.

Optimum amyloid fibril formation of a peptide fragment suggests the amyloidogenic preference of beta2-microglobulin under physiological conditions

Beta(2)-microglobulin (beta(2)m) is a major component of amyloid fibrils deposited in patients with dialysis-related amyloidosis. Although full-length beta(2)m readily forms amyloid fibrils in vitro by seed-dependent extension with a maximum at pH 2.5, fibril formation under physiological conditions as detected in patients has been difficult to reproduce. A 22-residue K3 peptide of beta(2)m, Ser(20)-Lys(41), obtained by digestion with Acromobacter protease I, forms amyloid fibrils without seeding. To obtain further insight into the mechanism of fibril formation, we studied the pH dependence of fibril formation of the K3 peptide and its morphology using a ThT fluorescence assay and electron microscopy, respectively. K3 peptide formed amyloid fibrils over a wide range of pH values with an optimum around pH 7 and contrasted with the pH profile of the seed-dependent extension reaction of full-length beta(2)m. This suggests that once the rigid native-fold of beta(2)m is unfolded and additional factors triggering the nucleation process are provided, full-length beta(2)m discloses an intrinsic potential to form amyloid fibrils at neutral pH. The fibril formation was strongly promoted by dimerization of K3 through Cys(25). The morphology of the fibrils varied depending on the fibril formation conditions and the presence or absence of a disulfide bond. Various fibrils had the potential to seed fibril formation of full-length beta(2)m accompanied with a characteristic lag phase, suggesting that the internal structures are similar.

Compensating for pulse imperfections in REDOR

Rotational-echo double resonance (REDOR) is a magic-angle spinning technique for measuring heteronuclear dipolar couplings. Rotor-synchronized pi pulses recouple the dipolar interaction. The accuracy of a REDOR determination of distance or orientation depends totally on the quality of the dephased (recoupled) and full-echo spectra. We present a scheme for measuring and compensating for the effects of pulse imperfections in REDOR experiments. No assumptions are made about the quality of the pi pulses, and no pulses are added or taken away in implementing the compensation for incomplete REDOR dephasing by imperfect pi pulses.

High-resolution solid-state NMR applied to polypeptides and membrane proteins

Solid-state NMR provides unique possibilities to study insoluble or noncrystalline molecules at the atomic level. High-resolution conditions can be established by employing magic-angle spinning at ultrahigh magnetic fields. We discuss NMR methods that make use of these experimental improvements and allow for the study of multiply or uniformly [(13)C,(15)N]-labeled polypeptides and proteins. Recent biophysical applications are reviewed.

Glycation induces formation of amyloid cross-beta structure in albumin

Amyloid fibrils are components of proteinaceous plaques that are associated with conformational diseases such as Alzheimer's disease, transmissible spongiform encephalopathies, and familial amyloidosis. Amyloid polypeptides share a specific quarternary structure element known as cross-beta structure. Commonly, fibrillar aggregates are modified by advanced glycation end products (AGE). In addition, AGE formation itself induces protein aggregation. Both amyloid proteins and protein-AGE adducts bind multiligand receptors, such as receptor for AGE, CD36, and scavenger receptors A and B type I, and the serine protease tissue-type plasminogen activator (tPA). Based on these observations, we hypothesized that glycation induces refolding of globular proteins, accompanied by formation of cross-beta structure. Using transmission electron microscopy, we demonstrate here that glycated albumin condensates into fibrous or amorphous aggregates. These aggregates bind to amyloid-specific dyes Congo red and thioflavin T and to tPA. In contrast to globular albumin, glycated albumin contains amino acid residues in beta-sheet conformation, as measured with circular dichroism spectropolarimetry. Moreover, it displays cross-beta structure, as determined with x-ray fiber diffraction. We conclude that glycation induces refolding of initially globular albumin into amyloid fibrils comprising cross-beta structure. This would explain how glycated ligands and amyloid ligands can bind to the same multiligand "cross-beta structure" receptors and to tPA.

13C CPMAS NMR studies of the elastin-like polypeptide (LGGVG)n

The elucidation of structure-function relationships in insoluble elastin is often approached using elastin-like polypeptides. In this manner, the characterization of the different regions in this extensive biopolymer may be facilitated in a "piece-wise" manner. Our solid-state NMR experiments indicate that (LGGVG)n has structural similarities to elastin and some elastin peptides, providing support for the utility of the mimetic peptides. Furthermore, previous NMR and CD studies indicated that the structure of the elastin-like polypeptide (LGGVG)n in solution is best described as a "conformational ensemble" with a mixture of type I and II beta-turns, in addition to unfolded regions. Our data indicate that the peptide does not adopt a single conformation in the solid state, lending further support to models for elastin that involve significant conformational heterogeneity.

Analysis of Proton−Proton Transfer Dynamics in Rotating Solids and Their Use for 3D Structure Determination

A detailed analysis of proton-proton-transfer dynamics under magic angle spinning NMR is presented. Results obtained on model compounds are evaluated under different experimental conditions and NMR mixing schemes. It is shown that the resulting buildup rates can be interpreted in terms of internuclear proton-proton distances provided that an appropriate theoretical description is chosen. As demonstrated in two test applications, these dependencies can be used in the context of a three-dimensional structure determination in the solid state.